{ "version": "0.1.0", "generated_from": "family frontmatter", "families": [ { "doc_id": "covered-thin-wall-enclosure", "name_zh": "带盖薄壁壳体", "name_en": "covered thin wall enclosure", "aliases": [ "带盖壳体", "薄壁带盖盒体", "带盖薄壁盒体", "covered-thin-wall-enclosure" ], "classification": { "relation": "project_extension", "node_ids": [], "note": "通用壳体未在 MCB 图 7 中明确列出;单独项目扩充,不改写原始分类,也不映射为齿轮箱。" }, "feature_ids": [ "feature-thin-wall-boss", "feature-ribs", "feature-cover-interface", "feature-holes" ], "knowledge_version": "0.1.0", "status": "retrieval_verified", "path": "references/families/covered-thin-wall-enclosure.md" }, { "doc_id": "hex-head-bolt", "name_zh": "六角头螺栓", "name_en": "hex head bolt", "aliases": [ "外六角螺栓", "六角头螺钉", "hexagonal head bolt", "hex-head-bolt" ], "classification": { "relation": "narrower_than", "node_ids": [ "mcb-125" ], "note": "映射六角头螺钉与螺栓节点;本版仅外六角头、直杆和简化螺纹的项目轮廓。" }, "feature_ids": [ "feature-hex-head", "feature-simplified-thread" ], "knowledge_version": "0.1.0", "status": "retrieval_verified", "path": "references/families/hex-head-bolt.md" }, { "doc_id": "involute-spur-gear", "name_zh": "带轮毂和键槽的渐开线直齿圆柱齿轮", "name_en": "involute spur gear", "aliases": [ "渐开线直齿轮", "直齿圆柱齿轮", "带键槽直齿轮", "involute-spur-gear" ], "classification": { "relation": "narrower_than", "node_ids": [ "mcb-074" ], "note": "按 Gears 下 Right spur gears 的并列语境理解;原文歧义保留,本族另行定义严格边界。" }, "feature_ids": [ "feature-involute", "feature-hub-keyway", "feature-holes" ], "knowledge_version": "0.1.0", "status": "retrieval_verified", "path": "references/families/involute-spur-gear.md" }, { "doc_id": "mounting-plate", "name_zh": "带孔安装板", "name_en": "mounting plate", "aliases": [ "安装板", "带孔板", "矩形安装板", "mounting-plate" ], "classification": { "relation": "narrower_than", "node_ids": [ "mcb-089" ], "note": "MCB 板件与圆板的项目细分;并非原树独立子类。" }, "feature_ids": [ "feature-holes" ], "knowledge_version": "0.1.0", "status": "retrieval_verified", "path": "references/families/mounting-plate.md" }, { "doc_id": "ribbed-bearing-housing", "name_zh": "带筋轴承座座体", "name_en": "ribbed bearing housing", "aliases": [ "带筋轴承座", "整体式轴承座座体", "ribbed-bearing-housing" ], "classification": { "relation": "component_of", "node_ids": [ "mcb-048" ], "note": "座体是轴承座/带座轴承对象的部件,不把完整组件与单一座体当作同义类。" }, "feature_ids": [ "feature-holes", "feature-ribs", "feature-coaxial-steps" ], "knowledge_version": "0.1.0", "status": "retrieval_verified", "path": "references/families/ribbed-bearing-housing.md" }, { "doc_id": "stepped-shaft", "name_zh": "台阶轴", "name_en": "stepped shaft", "aliases": [ "阶梯轴", "台阶实心轴", "stepped-shaft" ], "classification": { "relation": "narrower_than", "node_ids": [ "mcb-051" ], "note": "MCB Shafts 的连续同轴实心台阶轴细分。" }, "feature_ids": [ "feature-coaxial-steps" ], "knowledge_version": "0.1.0", "status": "retrieval_verified", "path": "references/families/stepped-shaft.md" } ] }