701 lines
24 KiB
JSON
701 lines
24 KiB
JSON
{
|
||
"version": "3.0.0",
|
||
"description": "Explicitly selected component recipes can recognize a qualified gear-pair noun without absorbing independent components or mechanisms.",
|
||
"engine_build": "f3d62ce93f72db42f311a46e",
|
||
"extends": "sample-parts-routing-v2.json",
|
||
"source_red_case": "/Users/lk/Projects/cad-generation-benchmark/experiments/compound-reducer-20261112/trial/request-004.json",
|
||
"cases": [
|
||
{
|
||
"id": "actual-compound-query-missing-facts",
|
||
"query": "构造带中央退刀槽的双斜齿轮副:法向模数2、法向压力角20°、螺旋角±15°、总齿宽20、中央槽2、两侧有效齿宽9;G1 20齿装Input_A,G2 30齿装Intermediate_B。需要确认分度直径、中心距、旋向、相位和可接受的几何表示。",
|
||
"type_id": "double-helical-gear",
|
||
"facts": {
|
||
"central_gap_mm": 2,
|
||
"face_width_mm": 20,
|
||
"geometry_representation": "double-helical-root-core-gap-v1",
|
||
"helix_angle_deg": 15,
|
||
"normal_module_mm": 2,
|
||
"normal_pressure_angle_deg": 20,
|
||
"root_transition": "radial-simplified",
|
||
"teeth": 20
|
||
},
|
||
"status": "needs_conditions",
|
||
"selected_type": "double-helical-gear",
|
||
"missing": [
|
||
"profile_shift",
|
||
"backlash_mm",
|
||
"addendum_coefficient",
|
||
"clearance_coefficient"
|
||
]
|
||
},
|
||
{
|
||
"id": "actual-compound-query-complete-facts",
|
||
"query": "构造带中央退刀槽的双斜齿轮副:法向模数2、法向压力角20°、螺旋角±15°、总齿宽20、中央槽2、两侧有效齿宽9;G1 20齿装Input_A,G2 30齿装Intermediate_B。需要确认分度直径、中心距、旋向、相位和可接受的几何表示。",
|
||
"type_id": "double-helical-gear",
|
||
"facts": {
|
||
"central_gap_mm": 2,
|
||
"face_width_mm": 20,
|
||
"geometry_representation": "double-helical-root-core-gap-v1",
|
||
"helix_angle_deg": 15,
|
||
"normal_module_mm": 2,
|
||
"normal_pressure_angle_deg": 20,
|
||
"root_transition": "radial-simplified",
|
||
"teeth": 20,
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25
|
||
},
|
||
"status": "matched",
|
||
"selected_type": "double-helical-gear",
|
||
"doc_id": "double-helical-gap"
|
||
},
|
||
{
|
||
"id": "same-type-pair-with-two-counts",
|
||
"query": "制作两个双斜齿轮组成的双斜齿轮副,齿数分别为20和30。",
|
||
"type_id": "double-helical-gear",
|
||
"facts": {
|
||
"central_gap_mm": 2,
|
||
"face_width_mm": 20,
|
||
"geometry_representation": "double-helical-root-core-gap-v1",
|
||
"helix_angle_deg": 15,
|
||
"normal_module_mm": 2,
|
||
"normal_pressure_angle_deg": 20,
|
||
"root_transition": "radial-simplified",
|
||
"teeth": 20,
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25
|
||
},
|
||
"status": "matched",
|
||
"selected_type": "double-helical-gear",
|
||
"doc_id": "double-helical-gap"
|
||
},
|
||
{
|
||
"id": "double-helical-pair-en",
|
||
"query": "create a double-helical gear pair, with 20 and 30 teeth.",
|
||
"type_id": "double-helical-gear",
|
||
"facts": {
|
||
"central_gap_mm": 2,
|
||
"face_width_mm": 20,
|
||
"geometry_representation": "double-helical-root-core-gap-v1",
|
||
"helix_angle_deg": 15,
|
||
"normal_module_mm": 2,
|
||
"normal_pressure_angle_deg": 20,
|
||
"root_transition": "radial-simplified",
|
||
"teeth": 20,
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25
|
||
},
|
||
"status": "matched",
|
||
"selected_type": "double-helical-gear",
|
||
"doc_id": "double-helical-gap"
|
||
},
|
||
{
|
||
"id": "double-helical-pair-en-space",
|
||
"query": "create a double helical gear pair.",
|
||
"type_id": "double-helical-gear",
|
||
"facts": {
|
||
"central_gap_mm": 2,
|
||
"face_width_mm": 20,
|
||
"geometry_representation": "double-helical-root-core-gap-v1",
|
||
"helix_angle_deg": 15,
|
||
"normal_module_mm": 2,
|
||
"normal_pressure_angle_deg": 20,
|
||
"root_transition": "radial-simplified",
|
||
"teeth": 20,
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25
|
||
},
|
||
"status": "matched",
|
||
"selected_type": "double-helical-gear",
|
||
"doc_id": "double-helical-gap"
|
||
},
|
||
{
|
||
"id": "herringbone-pair-zh",
|
||
"query": "制作无槽连续人字齿轮副。",
|
||
"type_id": "herringbone-gear",
|
||
"facts": {
|
||
"normal_module_mm": 2,
|
||
"teeth": 24,
|
||
"normal_pressure_angle_deg": 20,
|
||
"helix_angle_deg": 20,
|
||
"face_width_mm": 16,
|
||
"central_gap_mm": 0,
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25,
|
||
"root_transition": "radial-simplified",
|
||
"geometry_representation": "herringbone-continuous-midplane-v1"
|
||
},
|
||
"status": "matched",
|
||
"selected_type": "herringbone-gear",
|
||
"doc_id": "herringbone-continuous"
|
||
},
|
||
{
|
||
"id": "spur-pair-zh",
|
||
"query": "制作外渐开线直齿轮副。",
|
||
"type_id": "involute-spur-gear",
|
||
"facts": {
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25,
|
||
"module_mm": 2,
|
||
"teeth": 24,
|
||
"pressure_angle_deg": 20,
|
||
"root_transition": "radial-simplified"
|
||
},
|
||
"status": "matched",
|
||
"selected_type": "involute-spur-gear",
|
||
"doc_id": "gear-browser-equation-workflow"
|
||
},
|
||
{
|
||
"id": "spur-pair-en",
|
||
"query": "create an external involute spur gear pair.",
|
||
"type_id": "involute-spur-gear",
|
||
"facts": {
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25,
|
||
"module_mm": 2,
|
||
"teeth": 24,
|
||
"pressure_angle_deg": 20,
|
||
"root_transition": "radial-simplified"
|
||
},
|
||
"status": "matched",
|
||
"selected_type": "involute-spur-gear",
|
||
"doc_id": "gear-browser-equation-workflow"
|
||
},
|
||
{
|
||
"id": "helical-pair-zh",
|
||
"query": "制作斜齿圆柱齿轮副。",
|
||
"type_id": "helical-cylindrical-gear",
|
||
"facts": {
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25,
|
||
"normal_module_mm": 2,
|
||
"teeth": 24,
|
||
"normal_pressure_angle_deg": 20,
|
||
"helix_angle_deg": 20,
|
||
"root_transition": "radial-simplified"
|
||
},
|
||
"status": "matched",
|
||
"selected_type": "helical-cylindrical-gear",
|
||
"doc_id": "helical-cylinder-whole-section"
|
||
},
|
||
{
|
||
"id": "bevel-pair-en",
|
||
"query": "create a straight bevel gear pair.",
|
||
"type_id": "straight-bevel-gear",
|
||
"facts": {
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25,
|
||
"module_mm": 2,
|
||
"teeth": 24,
|
||
"pressure_angle_deg": 20,
|
||
"cone_angle_deg": 45,
|
||
"axial_height_mm": 8,
|
||
"root_transition": "radial-simplified",
|
||
"geometry_representation": "homothetic-frontal-involute-bevel-v1"
|
||
},
|
||
"status": "matched",
|
||
"selected_type": "straight-bevel-gear",
|
||
"doc_id": "straight-bevel-scaled-section"
|
||
},
|
||
{
|
||
"id": "no-explicit-selection-preserves-choice",
|
||
"query": "构造带中央退刀槽的双斜齿轮副:法向模数2、法向压力角20°、螺旋角±15°、总齿宽20、中央槽2、两侧有效齿宽9;G1 20齿装Input_A,G2 30齿装Intermediate_B。需要确认分度直径、中心距、旋向、相位和可接受的几何表示。",
|
||
"type_id": "double-helical-gear",
|
||
"facts": {
|
||
"central_gap_mm": 2,
|
||
"face_width_mm": 20,
|
||
"geometry_representation": "double-helical-root-core-gap-v1",
|
||
"helix_angle_deg": 15,
|
||
"normal_module_mm": 2,
|
||
"normal_pressure_angle_deg": 20,
|
||
"root_transition": "radial-simplified",
|
||
"teeth": 20,
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25
|
||
},
|
||
"status": "ambiguous"
|
||
},
|
||
{
|
||
"id": "wrong-spur-selection-cannot-override-query",
|
||
"query": "构造带中央退刀槽的双斜齿轮副:法向模数2、法向压力角20°、螺旋角±15°、总齿宽20、中央槽2、两侧有效齿宽9;G1 20齿装Input_A,G2 30齿装Intermediate_B。需要确认分度直径、中心距、旋向、相位和可接受的几何表示。",
|
||
"type_id": "double-helical-gear",
|
||
"facts": {
|
||
"central_gap_mm": 2,
|
||
"face_width_mm": 20,
|
||
"geometry_representation": "double-helical-root-core-gap-v1",
|
||
"helix_angle_deg": 15,
|
||
"normal_module_mm": 2,
|
||
"normal_pressure_angle_deg": 20,
|
||
"root_transition": "radial-simplified",
|
||
"teeth": 20,
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25
|
||
},
|
||
"status": "ambiguous",
|
||
"selected_type": "involute-spur-gear"
|
||
},
|
||
{
|
||
"id": "separate-pair-is-another-object",
|
||
"query": "制作双斜齿轮,另做齿轮副。",
|
||
"type_id": "double-helical-gear",
|
||
"facts": {
|
||
"central_gap_mm": 2,
|
||
"face_width_mm": 20,
|
||
"geometry_representation": "double-helical-root-core-gap-v1",
|
||
"helix_angle_deg": 15,
|
||
"normal_module_mm": 2,
|
||
"normal_pressure_angle_deg": 20,
|
||
"root_transition": "radial-simplified",
|
||
"teeth": 20,
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25
|
||
},
|
||
"status": "ambiguous",
|
||
"selected_type": "double-helical-gear"
|
||
},
|
||
{
|
||
"id": "different-bevel-part-preserved",
|
||
"query": "制作双斜齿轮副,再做直齿锥齿轮。",
|
||
"type_id": "double-helical-gear",
|
||
"facts": {
|
||
"central_gap_mm": 2,
|
||
"face_width_mm": 20,
|
||
"geometry_representation": "double-helical-root-core-gap-v1",
|
||
"helix_angle_deg": 15,
|
||
"normal_module_mm": 2,
|
||
"normal_pressure_angle_deg": 20,
|
||
"root_transition": "radial-simplified",
|
||
"teeth": 20,
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25
|
||
},
|
||
"status": "ambiguous",
|
||
"selected_type": "double-helical-gear"
|
||
},
|
||
{
|
||
"id": "extra-worm-preserved",
|
||
"query": "制作双斜齿轮副,另加蜗杆。",
|
||
"type_id": "double-helical-gear",
|
||
"facts": {
|
||
"central_gap_mm": 2,
|
||
"face_width_mm": 20,
|
||
"geometry_representation": "double-helical-root-core-gap-v1",
|
||
"helix_angle_deg": 15,
|
||
"normal_module_mm": 2,
|
||
"normal_pressure_angle_deg": 20,
|
||
"root_transition": "radial-simplified",
|
||
"teeth": 20,
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25
|
||
},
|
||
"status": "ambiguous",
|
||
"selected_type": "double-helical-gear"
|
||
},
|
||
{
|
||
"id": "second-mechanism-preserved",
|
||
"query": "制作双斜齿轮副和蜗轮蜗杆机构。",
|
||
"type_id": "double-helical-gear",
|
||
"facts": {
|
||
"central_gap_mm": 2,
|
||
"face_width_mm": 20,
|
||
"geometry_representation": "double-helical-root-core-gap-v1",
|
||
"helix_angle_deg": 15,
|
||
"normal_module_mm": 2,
|
||
"normal_pressure_angle_deg": 20,
|
||
"root_transition": "radial-simplified",
|
||
"teeth": 20,
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25
|
||
},
|
||
"status": "ambiguous",
|
||
"selected_type": "double-helical-gear"
|
||
},
|
||
{
|
||
"id": "mechanism-selection-does-not-infer-single-part",
|
||
"query": "构造带中央退刀槽的双斜齿轮副:法向模数2、法向压力角20°、螺旋角±15°、总齿宽20、中央槽2、两侧有效齿宽9;G1 20齿装Input_A,G2 30齿装Intermediate_B。需要确认分度直径、中心距、旋向、相位和可接受的几何表示。",
|
||
"type_id": "double-helical-gear",
|
||
"facts": {
|
||
"geometry_representation": "parallel-external-spur-pair-v1"
|
||
},
|
||
"status": "ambiguous",
|
||
"selected_type": "gear-pair"
|
||
},
|
||
{
|
||
"id": "different-spur-part-preserved",
|
||
"query": "制作双斜齿轮副与外渐开线直齿轮。",
|
||
"type_id": "double-helical-gear",
|
||
"facts": {
|
||
"central_gap_mm": 2,
|
||
"face_width_mm": 20,
|
||
"geometry_representation": "double-helical-root-core-gap-v1",
|
||
"helix_angle_deg": 15,
|
||
"normal_module_mm": 2,
|
||
"normal_pressure_angle_deg": 20,
|
||
"root_transition": "radial-simplified",
|
||
"teeth": 20,
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25
|
||
},
|
||
"status": "ambiguous",
|
||
"selected_type": "double-helical-gear"
|
||
},
|
||
{
|
||
"id": "different-pair-form-preserved",
|
||
"query": "制作双斜齿轮副与斜齿轮副。",
|
||
"type_id": "double-helical-gear",
|
||
"facts": {
|
||
"central_gap_mm": 2,
|
||
"face_width_mm": 20,
|
||
"geometry_representation": "double-helical-root-core-gap-v1",
|
||
"helix_angle_deg": 15,
|
||
"normal_module_mm": 2,
|
||
"normal_pressure_angle_deg": 20,
|
||
"root_transition": "radial-simplified",
|
||
"teeth": 20,
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25
|
||
},
|
||
"status": "ambiguous",
|
||
"selected_type": "double-helical-gear"
|
||
},
|
||
{
|
||
"id": "unqualified-pair-cannot-use-part-id",
|
||
"query": "制作齿轮副。",
|
||
"type_id": "double-helical-gear",
|
||
"facts": {
|
||
"central_gap_mm": 2,
|
||
"face_width_mm": 20,
|
||
"geometry_representation": "double-helical-root-core-gap-v1",
|
||
"helix_angle_deg": 15,
|
||
"normal_module_mm": 2,
|
||
"normal_pressure_angle_deg": 20,
|
||
"root_transition": "radial-simplified",
|
||
"teeth": 20,
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25
|
||
},
|
||
"status": "ambiguous",
|
||
"selected_type": "double-helical-gear"
|
||
},
|
||
{
|
||
"id": "negated-part-cannot-use-part-id",
|
||
"query": "不要双斜齿轮副,制作直齿轮。",
|
||
"type_id": "double-helical-gear",
|
||
"facts": {
|
||
"central_gap_mm": 2,
|
||
"face_width_mm": 20,
|
||
"geometry_representation": "double-helical-root-core-gap-v1",
|
||
"helix_angle_deg": 15,
|
||
"normal_module_mm": 2,
|
||
"normal_pressure_angle_deg": 20,
|
||
"root_transition": "radial-simplified",
|
||
"teeth": 20,
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25
|
||
},
|
||
"status": "ambiguous",
|
||
"selected_type": "double-helical-gear"
|
||
},
|
||
{
|
||
"id": "representation-conflict-preserved",
|
||
"query": "制作双斜齿轮副。",
|
||
"type_id": "double-helical-gear",
|
||
"facts": {
|
||
"central_gap_mm": 2,
|
||
"face_width_mm": 20,
|
||
"geometry_representation": "uncovered-variant",
|
||
"helix_angle_deg": 15,
|
||
"normal_module_mm": 2,
|
||
"normal_pressure_angle_deg": 20,
|
||
"root_transition": "radial-simplified",
|
||
"teeth": 20,
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25
|
||
},
|
||
"status": "uncovered",
|
||
"selected_type": "double-helical-gear",
|
||
"conflicts": [
|
||
"geometry_representation"
|
||
]
|
||
},
|
||
{
|
||
"id": "parameter-domain-conflict-preserved",
|
||
"query": "制作双斜齿轮副。",
|
||
"type_id": "double-helical-gear",
|
||
"facts": {
|
||
"central_gap_mm": 2,
|
||
"face_width_mm": 20,
|
||
"geometry_representation": "double-helical-root-core-gap-v1",
|
||
"helix_angle_deg": 15,
|
||
"normal_module_mm": 2,
|
||
"normal_pressure_angle_deg": 20,
|
||
"root_transition": "radial-simplified",
|
||
"teeth": 40,
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25
|
||
},
|
||
"status": "uncovered",
|
||
"selected_type": "double-helical-gear",
|
||
"conflicts": [
|
||
"teeth"
|
||
]
|
||
},
|
||
{
|
||
"id": "repeated-same-part-name",
|
||
"query": "制作双斜齿轮副,双斜齿轮的轴线平行。",
|
||
"type_id": "double-helical-gear",
|
||
"facts": {
|
||
"central_gap_mm": 2,
|
||
"face_width_mm": 20,
|
||
"geometry_representation": "double-helical-root-core-gap-v1",
|
||
"helix_angle_deg": 15,
|
||
"normal_module_mm": 2,
|
||
"normal_pressure_angle_deg": 20,
|
||
"root_transition": "radial-simplified",
|
||
"teeth": 20,
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25
|
||
},
|
||
"status": "matched",
|
||
"selected_type": "double-helical-gear",
|
||
"doc_id": "double-helical-gap"
|
||
},
|
||
{
|
||
"id": "independent-general-mechanism-preserved",
|
||
"query": "制作双斜齿轮副,并制作一对齿轮传动机构。",
|
||
"type_id": "double-helical-gear",
|
||
"facts": {
|
||
"central_gap_mm": 2,
|
||
"face_width_mm": 20,
|
||
"geometry_representation": "double-helical-root-core-gap-v1",
|
||
"helix_angle_deg": 15,
|
||
"normal_module_mm": 2,
|
||
"normal_pressure_angle_deg": 20,
|
||
"root_transition": "radial-simplified",
|
||
"teeth": 20,
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25
|
||
},
|
||
"status": "ambiguous",
|
||
"selected_type": "double-helical-gear"
|
||
},
|
||
{
|
||
"id": "punctuation-does-not-join-nouns",
|
||
"query": "制作双斜齿轮、齿轮副。",
|
||
"type_id": "double-helical-gear",
|
||
"facts": {
|
||
"central_gap_mm": 2,
|
||
"face_width_mm": 20,
|
||
"geometry_representation": "double-helical-root-core-gap-v1",
|
||
"helix_angle_deg": 15,
|
||
"normal_module_mm": 2,
|
||
"normal_pressure_angle_deg": 20,
|
||
"root_transition": "radial-simplified",
|
||
"teeth": 20,
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25
|
||
},
|
||
"status": "ambiguous",
|
||
"selected_type": "double-helical-gear"
|
||
},
|
||
{
|
||
"id": "independent-pair-en-preserved",
|
||
"query": "create a double-helical gear and a gear pair.",
|
||
"type_id": "double-helical-gear",
|
||
"facts": {
|
||
"central_gap_mm": 2,
|
||
"face_width_mm": 20,
|
||
"geometry_representation": "double-helical-root-core-gap-v1",
|
||
"helix_angle_deg": 15,
|
||
"normal_module_mm": 2,
|
||
"normal_pressure_angle_deg": 20,
|
||
"root_transition": "radial-simplified",
|
||
"teeth": 20,
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25
|
||
},
|
||
"status": "ambiguous",
|
||
"selected_type": "double-helical-gear"
|
||
},
|
||
{
|
||
"id": "unknown-selection-preserved",
|
||
"query": "构造带中央退刀槽的双斜齿轮副:法向模数2、法向压力角20°、螺旋角±15°、总齿宽20、中央槽2、两侧有效齿宽9;G1 20齿装Input_A,G2 30齿装Intermediate_B。需要确认分度直径、中心距、旋向、相位和可接受的几何表示。",
|
||
"type_id": "double-helical-gear",
|
||
"facts": {
|
||
"central_gap_mm": 2,
|
||
"face_width_mm": 20,
|
||
"geometry_representation": "double-helical-root-core-gap-v1",
|
||
"helix_angle_deg": 15,
|
||
"normal_module_mm": 2,
|
||
"normal_pressure_angle_deg": 20,
|
||
"root_transition": "radial-simplified",
|
||
"teeth": 20,
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25
|
||
},
|
||
"status": "ambiguous",
|
||
"selected_type": "unknown-gear-type"
|
||
},
|
||
{
|
||
"id": "latin-prefix-does-not-qualify-independent-pair",
|
||
"query": "create a double-helical gear, then a superdouble-helical gear pair.",
|
||
"type_id": "double-helical-gear",
|
||
"facts": {
|
||
"central_gap_mm": 2,
|
||
"face_width_mm": 20,
|
||
"geometry_representation": "double-helical-root-core-gap-v1",
|
||
"helix_angle_deg": 15,
|
||
"normal_module_mm": 2,
|
||
"normal_pressure_angle_deg": 20,
|
||
"root_transition": "radial-simplified",
|
||
"teeth": 20,
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25
|
||
},
|
||
"status": "ambiguous",
|
||
"selected_type": "double-helical-gear"
|
||
},
|
||
{
|
||
"id": "unspecified-repeated-noun-remains-conservative",
|
||
"query": "制作双斜齿轮副,两个齿轮分别为20齿和30齿。",
|
||
"type_id": "double-helical-gear",
|
||
"facts": {
|
||
"central_gap_mm": 2,
|
||
"face_width_mm": 20,
|
||
"geometry_representation": "double-helical-root-core-gap-v1",
|
||
"helix_angle_deg": 15,
|
||
"normal_module_mm": 2,
|
||
"normal_pressure_angle_deg": 20,
|
||
"root_transition": "radial-simplified",
|
||
"teeth": 20,
|
||
"profile_shift": 0,
|
||
"backlash_mm": 0,
|
||
"addendum_coefficient": 1,
|
||
"clearance_coefficient": 0.25
|
||
},
|
||
"status": "ambiguous",
|
||
"selected_type": "double-helical-gear"
|
||
},
|
||
{
|
||
"id": "actual-bevel-pair-query-keeps-missing-facts",
|
||
"query": "当前待建第二级直齿锥齿轮副:G3、G4均20齿,大端模数2、压力角20°、轴交角90°、参考分锥角45°、沿锥距齿宽8;采用共同参考锥顶的缩放截面近似。请给出合法表示和关键构造检查。",
|
||
"type_id": "straight-bevel-gear",
|
||
"selected_type": "straight-bevel-gear",
|
||
"facts": {
|
||
"cone_angle_deg": 45,
|
||
"face_width_mm": 8,
|
||
"geometry_representation": "homothetic-frontal-involute-bevel-v1",
|
||
"pressure_angle_deg": 20,
|
||
"teeth": 20
|
||
},
|
||
"status": "needs_conditions",
|
||
"missing": [
|
||
"profile_shift",
|
||
"backlash_mm",
|
||
"addendum_coefficient",
|
||
"clearance_coefficient",
|
||
"module_mm",
|
||
"axial_height_mm",
|
||
"root_transition"
|
||
]
|
||
},
|
||
{
|
||
"id": "listed-worm-components-do-not-infer-mechanism",
|
||
"query": "当前待建第三级:C轴上的ZA圆柱蜗杆,右旋2头,轴向模数2,轴向压力角20°,分度直径20,有效长度28;D轴蜗轮32齿,端面模数2,端面压力角20°,齿宽7,参考蜗杆一致,喉部主半径42、母圆半径8,关于齿宽中面对称,两轴中心距42。请给出合法表示和关键构造检查。",
|
||
"type_id": "worm-drive",
|
||
"selected_type": "worm-drive",
|
||
"facts": {
|
||
"addendum_coefficient": 1,
|
||
"axial_module_mm": 2,
|
||
"axial_pressure_angle_deg": 20,
|
||
"geometry_representation": "za-worm-and-illustrative-throat-wheel-v1",
|
||
"helix_hand": "right",
|
||
"lead_mm": 4,
|
||
"pitch_diameter_mm": 20,
|
||
"pressure_angle_deg": 20,
|
||
"teeth": 32,
|
||
"worm_starts": 2
|
||
},
|
||
"status": "ambiguous"
|
||
},
|
||
{
|
||
"id": "explicit-worm-mechanism-name-uses-existing-route",
|
||
"query": "当前待建第三级蜗轮蜗杆机构:C轴ZA蜗杆与D轴蜗轮,两轴中心距42。",
|
||
"type_id": "worm-drive",
|
||
"selected_type": "worm-drive",
|
||
"facts": {
|
||
"geometry_representation": "za-worm-and-illustrative-throat-wheel-v1"
|
||
},
|
||
"status": "matched",
|
||
"doc_id": "illustrative-worm-drive-interface"
|
||
},
|
||
{
|
||
"id": "explicit-worm-mechanism-keeps-representation-conflict",
|
||
"query": "当前待建第三级蜗轮蜗杆机构:C轴ZA蜗杆与D轴蜗轮,两轴中心距42。",
|
||
"type_id": "worm-drive",
|
||
"selected_type": "worm-drive",
|
||
"facts": {
|
||
"geometry_representation": "uncovered-variant"
|
||
},
|
||
"status": "uncovered",
|
||
"conflicts": [
|
||
"geometry_representation"
|
||
]
|
||
}
|
||
],
|
||
"continuation_source": "/Users/lk/Projects/cad-generation-benchmark/experiments/compound-reducer-20261112/trial-02-continuation-r2/terminal-assistant.json"
|
||
}
|