Add the pid actuator: setpoint inputs, integral action, slew rate limiting.

<pid kp kv|dampratio [ki imax] [slewmax]> is a PID controller with real position and velocity setpoint inputs on a single force output, plus an optional feedforward input. With a zero velocity setpoint it reproduces <position> bit-exactly; the input signature is any subset of [pos, vel, ff], selected with input="..." and recorded as mjtCtrlInput bits in
actuator_ctrlspec; absent setpoint inputs are fixed at zero, so the control vector contains no inert entries.

kp and kv are single-sourced in the affine bias parameters (biasprm[1,2]) with no gainprm mirror: every consumer of the position-servo shape
(dampratio conversion, inheritrange, qDeriv) reads one location, which is what makes the bit-exact <position> parity possible. Controller state uses dyntype 'pid' with slot-gated activations in the order [slew, integral], following the dcmotor slot idiom: slewmax (dynprm[1]) rate limits the effective position setpoint through an activation holding it;
ki (gainprm[0]) integrates the position error -- wrapped on rotational transmissions -- with anti-windup clamping of the integrand at imax (dynprm[0]). Both features require the pos input. Servo input unpacking is shared with the dcmotor controller (unpackServoInputs); per-input ranges are exposed as posrange/velrange/ffrange.

This subsumes the functionality of the mujoco.pid plugin with proper activation state: correct under all integrators, visible to keyframes, act sensors and reset. Migration: kp/ki/kd map to kp/ki/kv, plugin imax is in force units (divide by ki), slewmax carries over; the single ctrl becomes input="pos".

PiperOrigin-RevId: 957588898
Change-Id: Id2786836ca6e76f58e5b5cc8323fc23be0a53784

include/mujoco/mjspec.h

@@ -725,6 +725,8 @@ typedef struct mjsActuator_ {      // actuator specification
   double dynprm[mjNDYN];           // dynamics parameters
   int actdim;                      // number of activation variables
   int ctrlspec;                    // input signature, scoped by gaintype; 0: type default
+  double velrange[2];              // range of the velocity-setpoint input (pid)
+  double ffrange[2];               // range of the feedforward input (pid)
   mjtBool actearly;                // apply next activations to qfrc
 
   // transmission