.. include:: includes/macros.rst
.. include:: includes/roles.rst

========
Modeling
========

Introduction
------------

MuJoCo can load XML model files in its native **MJCF** format, as well as in the popular but more limited **URDF**
format. This chapter is the MJCF modeling guide. The reference manual is available in the :doc:`XMLreference`
chapter. The URDF documentation can be found elsewhere; here we only describe
MuJoCo-specific :ref:`URDF extensions <CURDF>`.

MJCF models can represent complex dynamical systems with a wide range of features and model elements. Accessing all
these features requires a rich modeling format, which can become cumbersome if it is not designed with usability in
mind. Therefore we have made an effort to design MJCF as a scalable format, allowing users to start small and build
more detailed models later. Particularly helpful in this regard is the extensive :ref:`default setting <CDefault>`
mechanism inspired by the idea of Cascading Style Sheets (CSS) in HTML. It enables users to rapidly create new models
and experiment with them. Experimentation is further aided by numerous :ref:`options <option>` which
can be used to reconfigure the simulation pipeline, and by quick re-loading that makes model editing an interactive
process.

One can think of MJCF as a hybrid between a modeling format and a programming language. There is a built-in compiler,
which is a concept normally associated with programming languages. While MJCF does not have the power of a
general-purpose programming language, a number of sophisticated compile-time computations are invoked automatically
depending on how the model is designed.

.. _Load:

Loading models
~~~~~~~~~~~~~~

As explained in :ref:`Model instances <Instance>` in the Overview chapter, MuJoCo models can be loaded from plain-text
XML files in the MJCF or URDF formats, and then compiled into a low-level mjModel. Alternatively a previously saved
mjModel can be loaded directly from a binary MJB file - whose format is not documented but is essentially a copy of the
mjModel memory buffer. MJCF and URDF files are loaded with :ref:`mj_loadXML` while MJB files are loaded with
:ref:`mj_loadModel`.

When an XML file is loaded, it is first parsed into a document object model (DOM) using the TinyXML parser internally.
This DOM is then processed and converted into a high-level mjCModel object. The conversion depends on the model format
- which is inferred from the top-level element in the XML file, and not from the file extension. Recall that a valid
XML file has a unique top-level element. This element must be :el:`mujoco` for MJCF, and :el:`robot` for URDF.

.. _Compile:

Compiling models
~~~~~~~~~~~~~~~~

Once a high-level mjCModel is created - by loading an MJCF file or an URDF file, or programmatically when such
functionality becomes available - it is compiled into mjModel. Even though loading and compilation are presently
combined in one step, compilation is independent of loading, meaning that the compiler works in the same way
regardless of how mjCModel was created. Both the parser and the compiler perform extensive error checking, and abort
when the first error is encountered. The resulting error messages contain the row and column number in the XML file,
and are self-explanatory so we do not document them here. The parser uses a custom schema to make sure that the file
structure, elements and attributes are valid. The compiler then applies many additional semantic checks. Finally, one
simulation step of the compiled model is performed and any runtime errors are intercepted. The latter is done by
(temporarily) setting :ref:`mju_user_error` to point to a function that throws C++
exceptions; the user can implement similar error-interception functionality at runtime if desired.

The entire process of parsing and compilation is very fast - less than a second if the model does not contain large
meshes or actuator lengthranges that need to be computed via simulation. This makes it possible to design models
interactively, by re-loading often and visualizing the changes. Note that the `simulate.cc`_ code sample has a
keyboard shortcut for re-loading the current model (Ctrl+L).

.. _Save:

Saving models
~~~~~~~~~~~~~

An MJCF model can consist of multiple (included) XML files as well as meshes, height fields and textures referenced
from the XML. After compilation, the contents of all these files are assembled into mjModel, which can be saved into a
binary MJB file with :ref:`mj_saveModel`. The MJB is a stand-alone file and does not
refer to any other files. It also loads faster. So we recommend saving commonly used models as MJB and loading them
when needed for simulation.

It is also possible to save a compiled mjCModel as MJCF with :ref:`mj_saveLastXML`. If any real-valued fields in the
corresponding mjModel were modified after compilation (which is unusual but can happen in system identification
applications for example), the modifications are automatically copied back into mjCModel before saving. Note that
structural changes cannot be made in the compiled model. The XML writer attempts to generate the smallest MJCF file
which is guaranteed to compile into the same model, modulo negligible numeric differences caused by the plain text
representation of real values. The resulting file may not have the same structure as the original because MJCF has many
user convenience features, allowing the same model to be specified in different ways. The XML writer uses a "canonical"
subset of MJCF where all coordinates are local and all body positions, orientations and inertial properties are
explicitly specified. In the Computation chapter we showed an `example <_static/example.xml>`__ MJCF file and the
corresponding `saved example <_static/example_saved.xml>`__.

.. _Mechanisms:

MJCF Mechanisms
---------------

MJCF uses several mechanisms for model creation which span multiple model elements. To avoid repetition we describe them
in detail only once in this section. These mechanisms do not correspond to new simulation concepts beyond those
introduced in the Computation chapter. Their role is to simplify the creation of MJFC models, and to enable the use of
different data formats without need for manual conversion to a canonical format.

.. _CTree:

Kinematic tree
~~~~~~~~~~~~~~

The main part of the MJCF file is an XML tree created by nested :ref:`body <body>` elements. The top-level body is
special and is called :el:`worldbody`. This tree organization is in contrast with URDF where one creates a collection of
links and then connects them with joints that specify a child and a parent link. In MJCF the child body is literally a
child of the parent body, in the sense of XML.

When a :ref:`joint <joint>` is defined inside a body, its function is not to connect the parent and child but rather to
create motion degrees of freedom between them. If no joints are defined within a given body, that body is welded to its
parent. A body in MJCF can contain multiple joints, thus there is no need to introduce dummy bodies for creating
composite joints. Instead simply define all the primitive joints that form the desired composite joint within the same
body. For example, two sliders and one hinge can be used to model a body moving in a plane.

Other MJCF elements can be defined within the tree created by nested body elements, in particular :ref:`joint <joint>`,
:ref:`geom <geom>`, :ref:`site <site>`, :ref:`camera <camera>`, :ref:`light <light>`. When an element is defined within
a body, it is fixed to the local frame of that body and always moves with it. Elements that refer to multiple bodies, or
do not refer to bodies at all, are defined in separate sections outside the kinematic tree.

.. _CDefault:

Default settings
~~~~~~~~~~~~~~~~

MJCF has an elaborate mechanism for setting default attribute values. This allows us to have a large number of elements
and attributes needed to expose the rich functionality of the software, and at the same time write short and readable
model files. This mechanism further enables the user to introduce a change in one place and have it propagate throughout
the model. We start with an example.

.. code-block:: xml

   <mujoco>
       <default class="main">
           <geom rgba="1 0 0 1"/>
           <default class="sub">
               <geom rgba="0 1 0 1"/>
           </default>
       </default>

       <worldbody>
           <geom type="box"/>
           <body childclass="sub">
               <geom type="ellipsoid"/>
               <geom type="sphere" rgba="0 0 1 0"/>
               <geom type="cylinder" class="main"/>
           </geom>
       </worldbody>
   </mujoco>

This example will not actually compile because some required information is missing, but here we are only interested
in the setting of geom rgba values. The four geoms created above will end up with the following rgba values as a
result of the default setting mechanism:

========= =========
geom type geom rgba
========= =========
box       1 0 0 1
ellipsoid 0 1 0 1
sphere    0 0 1 1
cylinder  1 0 0 1
========= =========


The box uses the top-level defaults class "main" to set the values of its undefined attributes, because no other class
was specified. The body specifies childclass "sub", causing all children of this body (and all their children etc) to
use class "sub" unless specified otherwise. So the ellipsoid uses class "sub". The sphere has explicitly defined rgba
which overrides the default settings. The cylinder specifies defaults class "main", and so it uses "main" instead of
"sub", even though the latter was specified in the childclass attribute of the body containing the geom.

Now we describe the general rules. MuJoCo supports unlimited number of defaults classes, created by possibly nested
:ref:`default <default>` elements in the XML. Each class has a unique name - which is a required
attribute except for the top-level class whose name is "main" if left undefined. Each class also has a complete
collection of dummy model elements, with their attributes set as follows. When a defaults class is defined within
another defaults class, the child automatically inherits all attribute values from the parent. It can then override
some or all of them by defining the corresponding attributes. The top-level defaults class does not have a parent, and
so its attributes are initialized to internal defaults which are shown in the reference documentation below.

The dummy elements contained in the defaults classes are not part of the model; they are only used to initialize the
attribute values of the actual model elements. When an actual element if first created, all its attributes are copied
from the corresponding dummy element in the defaults class that is currently active. There is always an active
defaults class, which can be determined in one of three ways. If no class is specified in the present element or any
of its ancestor bodies, the top-level class is used (regardless of whether it is called "main" or something else). If
no class is specified in the present element but one or more of its ancestor bodies specify a childclass, then the
childclass from the nearest ancestor body is used. If the present element specifies a class, that class is used
regardless of any childclass attributes in its ancestor bodies.

Some attributes, such as body position in models defined in global coordinates, can be in a special undefined state.
This instructs the compiler to infer the corresponding value from other information, in this case the positions of the
geoms attached to the body. The undefined state cannot be entered in the XML file. Therefore once an attribute is
defined in a given class, it cannot be undefined in that class or in any of its child classes. So if the goal is to
leave a certain attribute undefined in a given model element, in must be undefined in the active defaults class.

A final twist here are actuators. They are different because some of the actuator-related elements are actually
shortcuts, and shortcuts interact with the defaults setting mechanism in a non-obvious way. This is explained in the
:ref:`Actuator shortcuts <CActuator>` section below.

.. _CFrame:

Coordinate frames
~~~~~~~~~~~~~~~~~

After compilation the positions and orientations of all elements defined in the kinematic tree are expressed in local
coordinates, relative to the parent body for bodies, and relative to the body that owns the element for geoms, joints,
sites, cameras and lights. Consequently, when a compiled model is saved as MJCF, the coordinates are always local.
However when the user writes an MJCF file, the coordinates can be either local or global, as specified by the
:at:`coordinate` attribute of :ref:`compiler <compiler>`. This setting applies to all position and
orientation data in the MJCF file. A related attribute is :at:`angle`. It specifies whether all angles in the MJCF
file are expressed in degrees or radians (after compilation angles are always expressed in radians). Awareness of
these global settings is essential when constructing new models.

Global coordinates can sometimes be more intuitive and have the added benefit that body positions and orientations can
be omitted. In that case the body frame is set to the body inertial frame, which can itself be omitted and inferred
from the geom masses and inertias. When an MJCF model is defined in local coordinates on the other hand, the user must
specify the positions and orientations of the body frames explicitly. This is because if they were omitted, and the
elements inside the body were specified in local coordinates relative to the body frame, there would be no way to
infer the body frame.

Here is an example of an MJCF fragment in global coordinates:

.. code-block:: xml

   <body>
      <geom type="box" pos="1 0 0" size="0.5 0.5 0.5"/>
   </body>

When this model is compiled and saved as MJCF (in local coordinates) the same fragment becomes:

.. code-block:: xml

   <body pos="1 0 0">
      <inertial pos="0 0 0" mass="1000" diaginertia="166.667 166.667 166.667"/>
      <geom type="box" pos="0 0 0" size="0.5 0.5 0.5"/>
   </body>

The body position was set to the geom position (1 0 0), while the geom and inertial positions were set to (0 0 0)
relative to the body.

In principle the user always has a choice between local and global coordinates, but in practice this choice if viable
only when using geometric primitives rather than meshes. For meshes, the 3D vertex positions are expressed in either
local and global coordinates depending on how the mesh was designed - effectively forcing the user to adopt the same
convention for the entire model. The alternative would be to pre-process the mesh data outside MuJoCo so as to change
coordinates, but that effort is rarely justified.

.. _COrientation:

Frame orientations
~~~~~~~~~~~~~~~~~~

Several model elements have right-handed spatial frames associated with them. These are all the elements defined in
the kinematic tree except for joints. A spatial frame is defined by its position and orientation. Specifying 3D
positions is straightforward, but specifying 3D orientations can be challenging. This is why MJCF provides several
alternative mechanisms. No matter which mechanism the user chooses, the frame orientation is always represented as a
unit quaternion after compilation. Recall that a 3D rotation by angle *a* around axis given by the unit vector (*x, y,
z*) corresponds to the quaternion (cos(*a*/2), sin(*a*/2) \* (*x, y, z*)). Also recall that every 3D orientation can
be uniquely specified by a single 3D rotation by some angle around some axis.

All MJCF elements that have spatial frames allow the five attributes listed below. The frame orientation is specified
using at most one of these attributes. The :at:`quat` attribute has a default value corresponding to the null
rotation, while the others are initialized in the special undefined state. Thus if none of these attributes are
specified by the user, the frame is not rotated.

:at:`quat`: :at-val:`real(4), "1 0 0 0"`
   If the quaternion is known, this is the preferred was to specify the frame orientation because it does not involve
   conversions. Instead it is normalized to unit length and copied into mjModel during compilation. When a model is
   saved as MJCF, all frame orientations are expressed as quaternions using this attribute.
:at:`axisangle`: :at-val:`real(4), optional`
   These are the quantities (*x, y, z, a*) mentioned above. The last number is the angle of rotation, in degrees or
   radians as specified by the :at:`angle` attribute of :ref:`compiler <compiler>`. The first three
   numbers determine a 3D vector which is the rotation axis. This vector is normalized to unit length during
   compilation, so the user can specify a vector of any non-zero length. Keep in mind that the rotation is right-handed;
   if the direction of the vector (*x, y, z*) is reversed this will result in the opposite rotation. Changing the sign
   of *a* can also be used to specify the opposite rotation.
:at:`euler`: :at-val:`real(3), optional`
   Rotation angles around three coordinate axes. The sequence of axes around which these rotations are applied is
   determined by the :at:`eulerseq` attribute of :ref:`compiler <compiler>` and is the same for the
   entire model.
:at:`xyaxes`: :at-val:`real(6), optional`
   The first 3 numbers are the X axis of the frame. The next 3 numbers are the Y axis of the frame, which is
   automatically made orthogonal to the X axis. The Z axis is then defined as the cross-product of the X and Y axes.
:at:`zaxis`: :at-val:`real(3), optional`
   The Z axis of the frame. The compiler finds the minimal rotation that maps the vector (0,0,1) into the vector
   specified here. This determines the X and Y axes of the frame implicitly. This is useful for geoms with rotational
   symmetry around the Z axis, as well as lights - which are oriented along the Z axis of their frame.

.. _CSolver:

Solver parameters
~~~~~~~~~~~~~~~~~

The solver :ref:`Parameters <soParameters>` section of the Computation chapter explained the
mathematical and algorithmic meaning of the quantities d, b, k which determine the behavior of the constraints in
MuJoCo. Here we explain how to set them. Setting is done indirectly, through the attributes :at:`solref` and
:at:`solimp` which are available in all MJCF elements involving constraints. These parameters can be adjusted per
constraint, or per defaults class, or left undefined - in which case MuJoCo uses the internal defaults shown below.
Note also the override mechanism available in :ref:`option <option>`; it can be used to change all
contact-related solver parameters at runtime, so as to experiment interactively with parameter settings or implement
continuation methods for numerical optimization.

Here we focus on a single scalar constraint. Using slightly different notation from the Computation chapter, let a1
denote the acceleration, v the velocity, r the position or residual (defined as 0 in friction dimensions), b and k the
stiffness and damping of the virtual spring used to define the reference acceleration aref = -b*v - k*r. Let d be the
constraint impedance, and a0 the acceleration in the absence of constraint force. Our earlier analysis revealed that
the dynamics in constraint space are approximately

a1 + d \* (b v + k r) = (1 - d) \* a0

Again, the parameters that are under the user's control are d, b, k. The remaining quantities are functions of the
system state and are computed automatically at each time step.

First we explain the setting of the impedance d. Recall that d must lie between 0 and 1; internally MuJoCo clamps it
to the range [:ref:`mjMINIMP mjMAXIMP <glNumeric>`] which is currently set to [0.0001 0.9999]. It
causes the solver to interpolate between the unforced acceleration a0 and reference acceleration aref. Small values of
d correspond to soft/weak constraints while large values of d correspond to strong/hard constraints. The user can set
d to a constant, or take advantage of its interpolating property and make it position-dependent, i.e. a function of r.
Position-dependent impedance can be used to model soft contact layers around objects, or define equality constraints
that become stronger with larger violation (so as to approximate backlash for example). The shape of the function d(r)
is determined by the element-specific parameter vector :at:`solimp`.

**solimp :** real(5), "0.9 0.95 0.001 0.5 2"
   The five numbers are (dmin, dmax, width, midpoint, power). They parameterize the function d(r). Prior to MuJoCo 2.0
   this attribute had three parameters, plus a global option specifying the shape of the function. In MuJoCo 2.0 we
   expanded the family of impedance functions while keeping it backward-compatible as follows. The user is allowed to
   set only the first three parameters, whose defaults are the same as in prior releases. The defaults for the last two
   parameters then generate the same function which was the default in prior releases (a sigmoid). The new
   parameterization further allows the sigmoid to become shifted and skewed, as shown in the plots below for different
   values of the additional parameters. The plots actually show two reflected sigmoids, because the impedance function
   d(r) depends on the absolute value of r. This flexibility was added to allow better control of remote contact forces,
   and can also be used for other constraints. The power (of the polynomial spline used to generate the function) must
   be 1 or greater. The midpoint (specifying the inflection point) must be between 0 and 1, and is expressed in units of
   width. Note that when the power is 1, the function is linear regardless of the midpoint.
   |image0|

   These plots show the impedance d(r) on the vertical axis, as a function of the constraint violation r on the
   horizontal axis. The quantity r is computed as follows. For equality constraints, r equals the constraint violation
   which can be either positive or negative. For friction loss or friction dimensions of elliptic cones, r is always 0.
   For limits, normal directions of elliptic cones and all directions of pyramidal cones, r is the (limit or contact)
   distance minus the margin at which the constraint becomes active; for contacts this margin is actually margin-gap.
   Therefore limit and contact constraints are active when the corresponding r is negative.

Next we explain the setting of the stiffness k and damping b. The idea here is to re-parameterize the model in terms of
the time constant and damping ratio of the above mass-spring-damper system. By "time constant" we mean the inverse of
the natural frequency times the damping ratio. Constraints whose residual is identically 0 have first-order dynamics and
the mass-spring-damper analysis does not apply. In that case the time constant is the rate of exponential decay of the
constraint velocity, and the damping ratio is ignored. In addition to this format, MuJoCo 2.0 allows a second format
where stiffness and damping are specified more directly.

**solref :** real(2), "0.02 1"
   There are two formats for this attribute, determined by the sign of the numbers. If both numbers are positive the
   specification is considered to be in the (timeconst, dampratio) format which has been available in MuJoCo all along.
   Otherwise the specification is considered to be in the new (-stiffness, -damping) format introduced in MuJoCo 2.0.
   We first describe the original format where the two numbers are (timeconst, dampratio). In this case we use a
   mass-spring-damper model to compute k, b after suitable scaling. Note that the effective stiffness d(r)*k and damping
   d(r)*b are scaled by the impedance d(r) which is a function of the distance r. Thus we cannot always achieve the
   specified mass-spring-damper properties, unless we completely undo the scaling by d. But the latter is undesirable
   because it would ruin the interpolating property, in particular the limit d = 0 would no longer disable the
   constraint. Instead we scale the stiffness and damping so that the damping ratio remains constant, while the time
   constant increases when d(r) gets smaller. The scaling formulas are
   b = 2 / (dmax \* timeconst)
   k = d(r) / (dmax \* dmax \* timeconst \* timeconst \* dampratio \* dampratio)
   The timeconst parameter should be at least two times larger than the simulation time step, otherwise the system can
   become too stiff relative to the numerical integrator (especially when Euler integration is used) and the simulation
   can go unstable. This is enforced internally, unless the :at:`refsafe` attribute of
   :ref:`flag <option-flag>` is set to false. The dampratio parameter would normally be set to 1,
   corresponding to critical damping. Smaller values result in under-damped or bouncy constraints, while larger values
   result in over-damped constraints.
   Next we describe the new format where the two numbers are (-stiffness, -damping). This allows more direct control
   over restitution in particular. We still apply some scaling so that the same numbers can be used with different
   impedances, but the scaling no longer depends on r and the two numbers no longer interact. The scaling formulas are
   b = damping / dmax
   k = stiffness / (dmax \* dmax)

.. _CContact:

Contact parameters
~~~~~~~~~~~~~~~~~~

The parameters of each contact were described in the :ref:`Contact <coContact>` section of the Computation
chapter. Here we explain how these parameters are set. If the geom pair is explicitly defined with the XML element
:ref:`pair <pair>`, it has attributes specifying all contact parameters directly. In that case the
parameters of the individual geoms are ignored. If on the other hand the contact is generated by the dynamic mechanism,
its parameters need to be inferred from the two geoms in the contact pair. If the two geoms have identical parameters
there is nothing to do, but what if their parameters are different? In that case we use the geom attributes
:at:`solmix` and :at:`priority` to decide how to combine them. The combination rules for each contact parameter
are as follows:

condim
   If one of the two geoms has higher priority, its condim is used. If both geoms have the same priority, the maximum of
   the two condims is used. In this way a frictionless geom and a frictional geom form a frictional contact, unless the
   frictionless geom has higher priority. The latter is desirable in particle systems for example, where we may not want
   the particles to stick to any objects.
friction
   Recall that contacts can have up to 5 friction coefficients: two tangential, one torsional, two rolling. Each contact
   in mjData.contact actually has all 5 of them, even if condim is less than 6 and not all coefficients are used. In
   contrast, geoms have only 3 friction coefficients: tangential (same for both axes), torsional, rolling (same for both
   axes). Each of these 3D vectors of friction coefficients is expanded into a 5D vector of friction coefficients by
   replicating the tangetial and rolling components. The contact friction coefficients are then computed according to
   the following rule: if one of the two geoms has higher priority, its friction coefficients are used. Otherwise the
   element-wise maximum of each friction coefficient over the two geoms is used. The rationale is similar to taking the
   maximum over condim: we want the more frictional geom to win.
   The reason for having 5 coefficients per contact and only 3 per geom is as follows. For a contact pair, we want to
   allow the most flexible model our solver can handle. As mentioned earlier, anisotropic friction can be exploited to
   model effects such as skating. This however requires knowing how the two axes of the contact tangent plane are
   oriented. For a predefined contact pair we know the two geom types in advance, and the corresponding collision
   function always generates contact frames oriented in the same way - which we do not describe here but it can be seen
   in the visualizer. For individual geoms however, we do not know which other geoms they might collide with and what
   their geom types might be, so there is no way to know how the contact tangent plane will be oriented when specifying
   an individual geom. This is why MuJoCo does now allow anisotropic friction in the individual geom specifications, but
   only in the explicit contact pair specifications.
margin, gap
   The maximum of the two geom margins (or gaps respectively) is used. The geom priority is ignored here, because the
   margin and gap are distance properties and a one-sided specification makes little sense.
solref, solimp
   If one of the two geoms has higher priority, its solref and solimp parameters are used. If both geoms have the same
   priority, the weighted average is used. The weights are proportional to the solmix attributes, i.e. weight1 = solmix1
   / (solmix1 + solmix2) and similarly for weight2. There is one important exception to this weighted averaging rule. If
   solref for either geom is non-positive, i.e. it relies on the new direct format introduced in MuJoCo 2.0, then the
   element-wise minimum is used regardless of solmix. This is because averaging solref parameters in different formats
   would be meaningless.

.. _COverride:

Contact override
~~~~~~~~~~~~~~~~

MuJoCo uses an elaborate as well as novel :ref:`Constraint model <Constraint>` described in the
Computation chapter. Gaining an intuition for how this model works requires some experimentation. In order to
facilitate this process, we provide a mechanism to override some of the solver parameters, without making changes to
the actual model. Once the override is disabled, the simulation reverts to the parameters specified in the model. This
mechanism can also be used to implement continuation methods in the context of numerical optimization (such as optimal
control or state estimation). This is done by allowing contacts to act from a distance in the early phases of
optimization - so as to help the optimizer find a gradient and get close to a good solution - and reducing this effect
later to make the final solution physically realistic.

The relevant settings here are the :at:`override` attribute of :ref:`flag <option-flag>` which
enables and disables this mechanism, and the :at:`o_margin`, :at:`o_solref`, :at:`o_solimp` attributes of
:ref:`option <option>` which specify the new solver parameters. Note that the override applies only to
contacts, and not to other types of constraints. In principle there are many real-valued parameters in a MuJoCo model
that could benefit from a similar override mechanism. However we had to draw a line somewhere, and contacts are the
natural choice because they give rise to the richest yet most difficult-to-tune behavior. Furthermore, contact
dynamics often present a challenge in terms of numerical optimization, and experience has shown that continuation over
contact parameters can help avoid local minima.

.. _CUser:

User parameters
~~~~~~~~~~~~~~~

A number of MJCF elements have the optional attribute :at:`user`, which defines a custom element-specific parameter
array. This interacts with the corresponding "nuser_XXX" attribute of the :ref:`size <size>` element.
If for example we set :at:`nuser_geom` to 5, then every geom in mjModel will have a custom array of 5 real-valued
parameters. These geom-specific parameters are either defined in the MJCF file via the :at:`user` attribute of
:ref:`geom <geom>`, or set to 0 by the compiler if this attribute is omitted. MuJoCo does not use these
parameters in any internal computations; instead they are available for custom computations. The parser allows arrays
of arbitrary length in the XML, and the compiler later resizes them to length nuser_XXX.

Some element-specific parameters that are normally used in internal computations can also be used in custom
computations. This is done by installing user callbacks which override parts of the simulation pipeline. For example,
the :ref:`general <general>` actuator element has attributes :at:`dyntype` and :at:`dynprm`. If
:at:`dyntype` is set to "user", then MuJoCo will call :ref:`mjcb_act_dyn` to compute
the actuator dynamics instead of calling its internal function. The user function pointed to by
:ref:`mjcb_act_dyn` can interpret the parameters defined in :at:`dynprm` however it
wishes. However the length of this parameter array cannot be changed (unlike the custom arrays described earlier whose
length is defined in the MJCF file). The same applies to other callbacks.

In addition to the element-specific user parameters described above, one can include global data in the model via
:ref:`custom <custom>` elements. For data that change in the course of the simulation, there is also
the array mjData.userdata whose size is determined by the :at:`nuserdata` attribute of the
:ref:`size <size>` element.

.. _CAlgorithms:

Algorithms and related settings
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The computation of constraint forces and constrained accelerations involves solving an optimization problem
numerically. MuJoCo has three algorithms for solving this optimization problem: CG, Newton, PGS. Each of them can be
applied to a pyramidal or elliptic model of the friction cones, and with dense or sparse constraint Jacobians. In
addition, the user can specify the maximum number of iterations, and tolerance level which controls early termination.
There is also a second Noslip solver, which is a post-processing step enabled by specifying a positive number of
noslip iterations. All these algorithm settings can be specified in the :ref:`option <option>` element.

The default settings work well for most models, but in some cases it is necessary to tune the algorithm. The best way
to do this is to experiment with the relevant settings and use the visual profiler in `simulate.cc`_, which shows the timing of different computations as
well as solver statistics per iteration. We can offer the following general guidelines and observations:

-  The constraint Jacobian should be dense for small models and sparse for large models. The default setting is 'auto';
   it resolves to dense when the number of degrees of freedom is up to 60, and sparse over 60. Note however that the
   threshold is better defined in terms of number of active constraints, which is model and behavior dependent.
-  The choice between pyramidal and elliptic friction cones is a modeling choice rather than an algorithmic choice, i.e.
   it leads to a different optimization problem solved with the same algorithms. Elliptic cones correspond more closely
   to physical reality. However pyramidal cones can improve the performance of the algorithms - but not necessarily.
   While the default is pyramidal, we recommend trying the elliptic cones. When contact slip is a problem, the best way
   to suppress it is to use elliptic cones, large impratio, and the Newton algorithm with very small tolerance. If that
   is not sufficient, enable the Noslip solver.
-  The Newton algorithm is the best choice for most models. It has quadratic convergence near the global minimum and
   gets there in surprisingly few iterations - usually around 5, and rarely more than 20. It should be used with
   aggressive tolerance values, say 1e-10, because it is capable of achieving high accuracy without added delay (due to
   quadratic convergence at the end). The only situation where we have seen it slow down are large models with elliptic
   cones and many slipping contacts. In that regime the Hessian factorization needs a lot of updates. It may also slow
   down in some large models with unfortunate ordering of model elements that results in high fill-in (computing the
   optimal elimination order is NP-hard, so we are relying on a heuristic). Note that the number of non-zeros in the
   factorized Hessian can be monitored in the profiler.
-  The CG algorithm works well in the situation described above where Newton slows down. In general CG shows linear
   convergence with a good rate, but it cannot compete with Newton in terms of number of iterations, especially when
   high accuracy is desired. However its iterations are much faster, and are not affected by fill-in or increased
   complexity due to elliptic cones. If Newton proves to be too slow, try CG next.
-  The PGS solver used to be the default solver until recently, and was substantially improved in MuJoCo 1.50 by making
   it work with sparse models. However we have not yet found a situation where it is the best algorithm, which is not to
   say that such situations do not exist. PGS solves a constrained optimization problem and has sub-linear convergence
   in our experience, however it usually makes rapid progress on the first few iterations. So it is a good choice when
   inaccurate solutions can be tolerated. For systems with large mass ratios or other model properties causing poor
   conditioning, PGS convergence tends to be rather slow. Keep in mind that PGS performs sequential updates, and
   therefore breaks symmetry in systems where the physics should be symmetric. In contrast, CG and Newton perform
   parallel updates and preserve symmetry.
-  The Noslip solver is a modified PGS solver. It is executed as a post-processing step after the main solver (which can
   be Newton, CG or PGS). The main solver updates all unknowns. In contrast, the Noslip solver updates only the
   constraint forces in friction dimensions, and ignores constraint regularization. This has the effect of suppressing
   the drift or slip caused by the soft-constraint model. However, this cascade of optimization steps is no longer
   solving a well-defined optimization problem (or any other problem); instead it is just an adhoc mechanism. While it
   usually does its job, we have seen some instabilities in models with more complex interactions among multiple
   contacts.
-  PGS has a setup cost (in terms of CPU time) for computing the inverse inertia in constraint space. Similarly, Newton
   has a setup cost for the initial factorization of the Hessian, and incurs additional factorization costs depending on
   how many factorization updates are needed later. CG does not have any setup cost. Since the Noslip solver is also a
   PGS solver, the PGS setup cost will be paid whenever Noslip is enabled, even if the main solver is CG or Newton. The
   setup operation for the main PGS and Noslip PGS is the same, thus the setup cost is paid only once when both are
   enabled.

.. _CActuator:

Actuator shortcuts
~~~~~~~~~~~~~~~~~~

As explained in the :ref:`Actuation model <geActuation>` section of the Computation chapter, MuJoCo
offers a flexible actuator model with transmission, activation dynamics and force generation components that can be
specified independently. The full functionality can be accessed via the XML element
:ref:`general <general>` which allows the user to create a variety of custom actuators. In addition,
MJCF provides shortcuts for configuring common actuators. This is done via the XML elements
:ref:`motor <motor>`, :ref:`position <position>`,
:ref:`velocity <velocity>`, :ref:`cylinder <cylinder>`,
:ref:`muscle <muscle>`. These are *not* separate model elements. Internally MuJoCo supports only one
actuator type - which is why when an MJCF model is saved all actuators are written as :el:`general`. Shortcuts create
general actuators implicitly, set their attributes to suitable values, and expose a subset of attributes with possibly
different names. For example, :el:`position` creates a position servo with attribute :at:`kp` which is the servo
gain. However :el:`general` does not have an attribute :at:`kp`. Instead the parser adjusts the gain and bias
parameters of the general actuator in a coordinated way so as to mimic a position servo. The same effect could have
been achieved by using :el:`general` directly, and setting its attributes to certain values as described below.

Actuator shortcuts also interact with defaults. Recall that the :ref:`default setting <CDefault>` mechanism involves
classes, each of which has a complete collection of dummy elements (one of each element type) used to initialize the
attributes of the actual model elements. In particular, each defaults class has only one general actuator element.
What happens if we specify :el:`position` and later :el:`velocity` in the same defaults class? The XML elements are
processed in order, and the attributes of the single general actuator are set every time an actuator-related element
is encountered. Thus :el:`velocity` has precedence. If however we specify :el:`general` in the defaults class, it will
only set the attributes that are given explicitly, and leave the rest unchanged. A similar complication arises when
creating actual model elements. Suppose the active defaults class specified :el:`position`, and now we create an
actuator using :el:`general` and omit some of its attributes. The missing attributes will be set to whatever values
are used to model a position servo, even though this actuator may not be intended as a position servo.

In light of these potential complications, we recommend a simple approach: use the same actuator shortcut in both the
defaults class and in the creation of actual model elements. If a given model requires different actuators, either
create multiple defaults classes, or avoid using defaults for actuators and instead specify all their attributes
explicitly.

.. _CLengthRange:

Actuator length range
~~~~~~~~~~~~~~~~~~~~~

As of MuJoCo 2.0, the field mjModel.actuator_lengthrange contains the range of feasible actuator lengths (or more
precisely, lengths of the actuator's transmission). This is needed to simulate :ref:`muscle actuators <CMuscle>` as
explained below. Here we focus on what actuator_lengthrange means and how to set it.

Unlike all other fields of mjModel which are exact physical or geometric quantities, actuator_lengthrange is an
approximation. Intuitively it corresponds to the minimum and maximum length that the actuator's transmission can reach
over all "feasible" configurations of the model. However MuJoCo constraints are soft, so in principle any
configuration is feasible. Yet we need a well-defined range for muscle modeling. There are three ways to set this
range: (1) provide it explicitly using the new attribute lengthrange available in all actuators; (2) copy it from the
limits of the joint or tendon to which the actuator is attached; (3) compute it automatically, as explained in the
rest of this section. There are many options here, controlled with the new XML element
:ref:`lengthrange <compiler-lengthrange>`.

Automatic computation of actuator length ranges is done at compile time, and the results are stored in
mjModel.actuator_lengthrange of the compiled model. If the model is then saved (either as XML or MJB), the computation
does not need to be repeated at the next load. This is important because the computation can slow down the model
compiler with large musculo-skeletal models. Indeed we have made the compiler multi-threaded just to speed up this
operation (different actuators are processed in parallel in different threads). Incidentally, this is why the flag
'-pthread' is now needed when linking user code against the MuJoCo library on Linux and macOS.

Automatic computation relies on modified physics simulation. For each actuator we apply force (negative when computing
the minimum, positive when computing the maximum) through the actuator's transmission, advance the simulation in a
damped regime avoiding instabilities, give it enough time to settle and record the result. This is related to gradient
descent with momentum, and indeed we have experimented with explicit gradient-based optimization, but the problem is
that it is not clear what objective we should be optimizing (given the mix of soft constraints). By using simulation,
we are essentially letting the physics tell us what to optimize. Keep in mind though that this is still an
optimization process, and as such it has parameters that may need to be adjusted. We provide conservative defaults
which should work with most models, but if they don't, use the attributes of
:ref:`lengthrange <compiler-lengthrange>` for fine-tuning.

It is important to keep in mind the geometry of the model when using this feature. The implicit assumption here is
that feasible actuator lengths are indeed limited. Furthermore we do not consider contacts as limiting factors (in
fact we disable contacts internally in this simulation, together with passive forces, gravity, friction loss and
actuator forces). This is because models with contacts can tangle up and produce many local minima. So the actuator
should be limited either because of joint or tendon limits defined in the model (which are enabled during this
simulation) or due to geometry. To illustrate the latter, consider a tendon with one end attached to the world and the
other end attached to an object spinning around a hinge joint attached to the world. In this case the minimum and
maximum length of the tendon are well-defined and depend on the size of the circle that the attachment point traces in
space, even though neither the joint nor the tendon have limits defined by the user. But if the actuator is attached
to the joint, or to a fixed tendon equal to the joint, then it is unlimited. The compiler will return an error in this
case, but it cannot tell if the error is due to lack of convergence or because the actuator length is unlimited. All
of this sounds overly complicated, and it is in the sense that we are considering all possible corner cases here. In
practice length ranges will almost always be used with muscle actuators attached to spatial tendons, and there will be
joint limits defined in the model, effectively limiting the lengths of the muscle actuators. If you get a convergence
error in such a model, the most likely explanation is that you forgot to include joint limits.

.. _CMuscle:

Muscle actuators
~~~~~~~~~~~~~~~~

As of MuJoCo 2.0, we provide a set of tools for modeling biological muscles. Users who want to add muscles with minimum
effort can do so with a single line of XML in the actuator section:

.. code-block:: xml

   <actuator>
       <muscle name="mymuscle" tendon="mytendon">
   </actuator>

Biological muscles look very different from each other, yet behave in remarkably similar ways once certain scaling is
applied. Our default settings apply such scaling, which is why one can obtain a reasonable muscle model without
adjusting any parameters. Constructing a more detailed model will of course require parameter adjustment, as explained
in this section.

Keep in mind that even though the muscle model is quite elaborate, it is still a type of MuJoCo actuator and obeys the
same conventions as all other actuators. A muscle can be defined using :ref:`general <general>`, but
the shortcut :ref:`muscle <muscle>` is more convenient. As with all other actuators, the force
production mechanism and the transmission are defined independently. Nevertheless, muscles only make (bio)physical
sense when attached to tendon or joint transmissions. For concreteness we will assume a tendon transmission here.

First we discuss length and length scaling. The range of feasible lengths of the transmission (i.e. MuJoCo tendon)
will play an important role; see :ref:`Length range <CLengthRange>` section above. In biomechanics, a muscle and a
tendon are attached in series and form a muscle-tendon actuator. Our convention is somewhat different: in MuJoCo the
entity that has spatial properties (in particular length and velocity) is the tendon, while the muscle is an abstract
force-generating mechanism that pulls on the tendon. Thus the tendon length in MuJoCo corresponds to the muscle+tendon
length in biomechanics. We assume that the biological tendon is inelastic, with constant length LT, while the
biological muscle length LM varies over time. The MuJoCo tendon length is the sum of the biological muscle and tendon
lengths:

actuator_length = LT + LM

Another important constant is the optimal resting length of the muscle, denoted L0. It equals the length LM at which
the muscle generates maximum active force at zero velocity. We do not ask the user to specify L0 and LT directly,
because it is difficult to know their numeric values given the spatial complexity of the tendon routing and wrapping.
Instead we compute L0 and LT automatically as follows. The length range computation described above already provided
the operating range for LT + LM. In addition, we ask the user to specify the operating range for the muscle length LM
scaled by the (still unknown) constant L0. This is done with the attribute range; the default scaled range is (0.75,
1.05). Now we can compute the two constants, using the fact that the actual and scaled ranges have to map to each
other:

(actuator_lengthrange[0] - LT) / L0 = range[0]

(actuator_lengthrange[1] - LT) / L0 = range[1]

At runtime, we compute the scaled muscle length and velocity as:

L = (actuator_length - LT) / L0

V = actuator_velocity / L0

The advantage of the scaled quantities is that all muscles behave similarly in that representation. The behavior is
captured by the Force-Length-Velocity (FLV) function measured in many experimental papers. We approximate this
function as follows:

|image1|

The function is in the form:

FLV(L, V, act) = FL(L)*FV(V)*act + FP(L)

Comparing to the general form of a MuJoCo actuator, we see that FL*FV is the actuator gain and FP is the actuator
bias. FL is the active force as a function of length, while FV is the active force as a function of velocity. They are
multiplied to obtain the overall active force (note the scaling by act which is the actuator activation). FP is the
passive force which is always present regardless of activation. The output of the FLV function is the scaled muscle
force. We multiply the scaled force by a muscle-specific constant F0 to obtain the actual force:

actuator_force = - FLV(L, V, act) \* F0

The negative sign is because positive muscle activation generates pulling force. The constant F0 is the peak active
force at zero velocity. It is related to the muscle thickness (i.e. physiological cross-sectional area or PCSA). If
known, it can be set with the attribute force of element :ref:`muscle <muscle>`. If it is not known, we
set it to -1 which is the default. In that case we rely on the fact that larger muscles tend to act on joints that
move more weight. The attribute scale defines this relationship as:

F0 = scale / actuator_acc0

The quantity actuator_acc0 is precomputed by the model compiler. It is the norm of the joint acceleration caused by
unit force acting on the actuator transmission. Intuitively, scale determines how strong the muscle is "on average"
while its actual strength depends on the geometric and inertial properties of the entire model.

Thus far we encountered three constants that define the properties of an individual muscle: LT, L0, F0. In addition,
the function FLV itself has several parameters illustrated in the above figure: lmin, lmax, vmax, fpmax, fvmax. These
are supposed to be the same for all muscles, however different experimental papers suggest different shapes of the FLV
function, thus users familiar with that literature may want to adjust them. We provide the MATLAB function
`FLV.m <_static/FLV.m>`__ which was used to generate the above figure and shows how we compute the FLV function.

Before embarking on a mission to design more accurate FLV functions, consider the fact that the operating range of the
muscle has a bigger effect than the shape of the FLV function, and in many cases this parameter is unknown. Below is a
graphical illustration:

|image2|

This figure format is common in the biomechanics literature, showing the operating range of each muscle superimposed
on the normalized FL curve (ignore the vertical displacement). Our default range is shown in black. The blue curves
are experimental data for two arm muscles. One can find muscles with small range, large range, range spanning the
ascending portion of the FL curve, or the descending portion, or some of both. Now suppose you have a model with 50
muscles. Do you believe that someone did careful experiments and measured the operating range for every muscle in your
model, taking into account all the joints that the muscle spans? If not, then it is better to think of
musculo-skeletal models as having the same general behavior as the biological system, while being different in various
details - including details that are of great interest to some research community. For most muscle properties which
modelers consider constant and known, there is an experimental paper showing that they vary under some conditions.
This is not to discourage people from building accurate models, but rather to discourage people from believing too
strongly in their models. Modeling in biology is quite different from modeling in physics and engineering... which is
why we find it ironic when people in Robotics complain that building accurate robot models is hard.

Coming back to our muscle model, there is the muscle activation act. This is the state of a first-order nonlinear
filter whose input is the control signal. The filter dynamics are:

d act / dt = (ctrl - act) / tau(ctrl, act)

Internally the control signal is clamped to [0, 1] even if the actuator does not have a control range specified. There
are two time constants specified with the attribute timeconst, namely timeconst = (tau_act, tau_deact) with defaults
(0.01, 0.04). The effective time constant tau is then computed at runtime as:

tau(ctrl, act) = tau_act \* (0.5 + 1.5*act), if ctrl > act

tau(ctrl, act) = tau_deact / (0.5 + 1.5*act), if ctrl <= act

Now we summarize the attributes of element :ref:`muscle <muscle>` which users may want to adjust,
depending on their familiarity with the biomechanics literature and availability of detailed measurements with regard
to a particular model:

Defaults
   Use the built-in defaults everywhere. All you have to do is attach a muscle to a tendon, as shown at the beginning of
   this section. This yields a generic yet reasonable model.
scale
   If you do not know the strength of individual muscles but want to make all muscles stronger or weaker, adjust scale.
   This can be adjusted separately for each muscle, but it makes more sense to set it once in the
   :ref:`default <default>` element.
force
   If you know the peak active force F0 of the individual muscles, enter it here. Many experimental papers contain this
   data.
range
   The operating range of the muscle in scaled lengths is also available in some papers. It is not clear how reliable
   such measurements are (given that muscles act on many joints) but they do exist. Note that the range differs
   substantially between muscles.
timeconst
   Muscles are composed of slow-twitch and fast-twitch fibers. The typical muscle is mixed, but some muscles have a
   higher proportion of one or the other fiber type, making them faster or slower. This can be modeled by adjusting the
   time constants. The vmax parameter of the FLV function should also be adjusted accordingly.
lmin, lmax, vmax, fpmax, fvmax
   These are the parameters controlling the shape of the FLV function. Advanced users can experiment with them; see
   MATLAB function `FLV.m <_static/FLV.m>`__. Similar to the scale setting, if you want to change the FLV
   parameters for all muscles, do so in the :ref:`default <default>` element.
Custom model
   Instead of adjusting the parameters of our muscle model, users can implement a different model, by setting gaintype,
   biastype and dyntype of a :ref:`general <general>` actuator to "user" and providing callbacks at
   runtime. Or, leave some of these types set to "muscle" and use our model, while replacing the other components. Note
   that tendon geometry computations are still handled by the standard MuJoCo pipeline providing actuator_length,
   actuator_velocity and actuator_lengthrange as inputs to the user's muscle model. Custom callbacks could then simulate
   elastic tendons or any other detail we have chosen to omit.

**Relation to OpenSim**

The standard software used by researchers in biomechanics is OpenSim. We have designed our muscle model to be similar
to the OpenSim model where possible, while making simplifications which result in significantly faster and more stable
simulations. To help MuJoCo users convert OpenSim models, here we summarize the similarities and differences.

The activation dynamics model is identical to OpenSim, including the default time constants.

The FLV function is not exactly the same, but both MuJoCo and OpenSim approximate the same experimental data, so they
are very close. For a description of the OpenSim model and summary of relevant experimental data, see:

Millard et al, "Flexing computational muscle: modeling and simulation of musculotendon dynamics", J Biomech Eng. 2013
Feb;135(2)

We assume inelastic tendons while OpenSim can model tendon elasticity. We decided not to do that here, because tendon
elasticity requires fast-equilibrium assumptions which in turn require various tweaks and are prone to simulation
instability. In practice tendons are quite stiff, and their effect can be captured approximately by stretching the FL
curve corresponding to the inelastic case (Zajac 89). This can be done in MuJoCo by shortening the muscle operating
range.

Pennation angle (i.e. the angle between the muscle and the line of force) is not modeled in MuJoCo and is assumed to
be 0. This effect can be approximated by scaling down the muscle force and also adjusting the operating range.

Tendon wrapping is also more limited in MuJoCo. We allow spheres and infinite cylinders as wrapping objects, and
require two wrapping objects to be separated by a fixed site in the tendon path. This is to avoid the need for
iterative computations of tendon paths. As of MuJoCo 2.0 we also allow "side sites" to be placed inside the sphere or
cylinder, which causes an inverse wrap: the tendon path is constrained to pass through the object instead of go around
it. This can replace torus wrapping objects used in OpenSim to keep the tendon path within a given area. Overall,
tendon wrapping is the most challenging part of converting an OpenSim model to a MuJoCo model, and requires some
manual work. On the bright side, there is a small number of high-quality OpenSim models in use, so once they are
converted we are done.

Below we illustrate the four types of tendon wrapping available in MuJoCo 2.0. Note that the curved sections of the
wrapping tendons are rendered as straight, but the geometry pipeline works with the actual curves and computes their
lengths and moments analytically:

|image3|

.. _CSensor:

Sensors
~~~~~~~

MuJoCo can simulate a wide variety of sensors as described in the :ref:`sensor <sensor>` element below.
User sensor types can also be defined, and are evaluated by the callback
:ref:`mjcb_sensor`. Sensors do not affect the simulation. Instead their outputs are
copied in the array mjData.sensordata and are available for user processing.

Here we describe the XML attributes common to all sensor types, so as to avoid repetition later.

:at:`name`: :at-val:`string, optional`
   Name of the sensor.
:at:`noise`: :at-val:`real, "0"`
   The standard deviation of zero-mean Gaussian noise added to the sensor output, when the :at:`sensornoise`
   attribute of :ref:`flag <option-flag>` is enabled. Sensor noise respects the sensor data type:
   quaternions and unit vectors remain normalized, non-negative quantities remain non-negative.
:at:`cutoff`: :at-val:`real, "0"`
   When this value is positive, it limits the absolute value of the sensor output. It is also used to normalize the
   sensor output in the sensor data plots in `simulate.cc`_.
:at:`user`: :at-val:`real(nuser_sensor), "0 0 ..."`
   See :ref:`User parameters <CUser>`.

.. _CComposite:

Composite objects
~~~~~~~~~~~~~~~~~

Composite objects were introduced in MuJoCo 2.0, along with solver optimizations to speed up the simulation of such
objects. They are not new model elements. Instead, they are (large) collections of existing elements designed to
simulate particle systems, ropes, cloth, and soft bodies. These collections are generated by the model compiler
automatically. The user configures the automatic generator on a high level, using the new XML element
:ref:`composite <composite>` and its attributes and sub-elements, as described in the XML reference
chapter. If the compiled model is then saved, :el:`composite` is no longer present and is replaced with the collection
of regular model elements that were automatically generated. So think of it as a macro that gets expanded by the model
compiler.

Composite objects are made up of regular MuJoCo bodies, which we call "element bodies" in this context. The element
bodies are created as children of the body within which :el:`composite` appears; thus a composite object appears in
the same place in the XML where a regular child body may have been defined. Each automatically-generated element body
has a single geom attached to it, usually a sphere but could also be capsule or ellipsoid. Thus the composite object
is essentially a particle system, however the particles can be constrained to move together in ways that simulate
various flexible objects. The initial positions of the element bodies form a regular grid in 1D, 2D or 3D. They could
all be children of the parent body (which can be the world or another regular body; composite objects cannot be
nested) and have joints allowing motion relative to the parent, or they could form a kinematic tree with joints
between the element bodies. They can also be connected with tendons with soft equality constraints on the tendon
length, creating the necessary coupling. Joint equality constraints are also used in some cases. The :at:`solref`
and :at:`solimp` attributes of these equality constraints can be adjusted by the user, thereby adjusting the
softness and flexibility of the composite objects.

In addition to setting up the physics, the composite object generator creates suitable rendering. 2D and 3D objects
can be rendered as :ref:`skins <skin>` which are also new in MuJoCo 2.0. The skin is generated
automatically, and can be textured as well as subdivided using bi-cubic interpolation. The actual physics and in
particular the collision detection are based on the element bodies and their geoms, while the skin is purely a
visualization object. Yet in most situations we prefer to look at the skin representation. To facilitate this, the
generator places all geoms, sites and tendons in group 3 whose visualization is disabled by default. So when you load
a 2D grid for example, you will see a continuous flexible surface and not a collection of spheres connected with
tendons. However when fine-tuning the model and trying to understand the physics behind it, it is useful to be able to
render the spheres and tendons. To switch the rendering style, disable the rendering of skins and enable group 3 for
geoms and tendons (note that starting with MuJoCo 2.0 we have added a group property to sites, tendons and joints in
addition to geoms).

We have designed the composite object generator to have intuitive high-level controls as much as possible, but at the
same time it exposes a large number of options that interact with each other and can profoundly affect the resulting
physics. So at some point users should read the :ref:`reference documentation <composite>` carefully.
As a quick start though, MuJoCo 2.0 comes with an example of each composite object type. Below we go over these
examples and explain the less obvious aspects. In all examples we have a static scene which is included in the model,
followed by a single composite object. The static scene has a mocap body (large capsule) that can be moved around with
the mouse to probe the behavior of the system. The XML snippets below are just the definition of the composite object;
see the XML model files in the distribution for the complete examples.

**Particle**.

|image4| |image5|

.. code-block:: xml

   <worldbody>
       <composite type="particle" count="10 10 10" spacing="0.07" offset="0 0 1">
           <geom size=".02" rgba=".8 .2 .1 1"/>
       </composite>
   </worldbody>

The above XML is all it takes to create a system with 1000 particles with initial positions on a 10-10-10 grid, and
set the size, color, spacing and offset of the particles. The resulting element bodies become children of the world
body. One could adjust many other properties including the softness of the contacts and the joint attributes. The plot
on the right shows the joints. Each element body has 3 orthogonal slider joints, allowing it to translate but not
rotate. The idea is that particles should have position but no orientation. MuJoCo bodies always have orientation,
however by using only slider joints we do not allow the orientation to change. The geom defaults are adjusted
automatically so that they make frictionless contacts with each other and with the rest of the model. So this system
has 1000 bodies (each with a geom), 3000 degrees of freedom and around 1000 active contacts. Evaluating the dynamics
takes around 1 ms on a single core of a modern processor. As with most other MuJoCo models, the soft constraints allow
simulation at much larger timesteps (this model is stable at 30 ms timestep and even higher).

**1D grid**.

|image6| |image7|

.. code-block:: xml

   <composite type="grid" count="20 1 1" spacing="0.045" offset="0 0 1">
       <joint kind="main" damping="0.001"/>
       <tendon kind="main" width="0.01"/>
       <geom size=".02" rgba=".8 .2 .1 1"/>
       <pin coord="1"/>
       <pin coord="13"/>
   </composite>

The grid type can create 1D or 2D grids, depending on the :at:`count` attribute. Here we illustrate 1D grids. These
are strings of spheres connected with tendons whose length is soft-equality-constrained. The softness can be adjusted.
Similar to particles, the element bodies here have slider joints but no rotational joints. The plot on the right
illustrates pinning. The :el:`pin` sub-element is used to specify the grid coordinates of the pinned bodies, and the
model compiler does not generate joints for these bodies, thereby fixing them rigidly to the parent body (in this case
the world). This makes the string in the right plot hang in space. The same mechanism can be used to model a whip for
example; in that case the parent body would be moving, and the first element body would be pinned to the parent.

**2D grid**.

|image8| |image9|

.. code-block:: xml

   <composite type="grid" count="9 9 1" spacing="0.05" offset="0 0 1">
       <skin material="matcarpet" inflate="0.001" subgrid="3" texcoord="true"/>
       <geom size=".02"/>
       <pin coord="0 0"/>
       <pin coord="8 0"/>
   </composite>

A 2D grid can be used to simulate cloth. What it really simulates is a 2D grid of spheres connected with
equality-constrained tendons (not shown). The model compiler can also generate skin, enabled with the :el:`skin`
sub-element in the above XML. Some of the element bodies can also be pinned, similar to 1D grids but using two grid
coordinates. The plot on the right shows a cloth pinned to the world body at the two corners, and draping over our
capsule probe. The skin on the right is subdivided using bi-cubic interpolation, which increases visual quality in the
absence of textures. When textures are present (left) the benefits of subdivision are less visible.

**Rope and loop**.

|image10| |image11|

.. code-block:: xml

   <body name="B10" pos="0 0 1">
       <freejoint/>
       <composite type="rope" count="21 1 1" spacing="0.04" offset="0 0 2">
           <joint kind="main" damping="0.005"/>
           <geom type="capsule" size=".01 .015" rgba=".8 .2 .1 1"/>
       </composite>
   </body>

The remaining composite object types create kinematic trees of element bodies, and the parent body becomes the root of
the tree. This is why :el:`composite` appears inside a moving body, and not inside the world body as in particle and
grid objects. If it appeared inside the world body, the root of the composite object would not move. Unlike grids and
particles, the orientation of the element bodies here can change. The kinematic tree is constructed using (mostly)
hinge joints. In the case of rope and loop objects illustrated here, the tree is a chain. Note the naming of the
parent body. This name must correspond to one of the automatically-generated names of the element bodies. This
mechanism is used to specify where the composite object should attach to the parent. Compared to 1D grids, the rope
and loop are less jittery and can use capsule and ellipsoid geoms in addition to spheres (thus filling the gaps for
collision detection). However this comes at a price. Because we have long kinematic chains, the resulting differential
equations become stiff and can no longer be integrated at large timesteps. The examples we provide illustrate
comfortable timesteps where the models are stable. The rope can be easily tied into a knot using mouse perturbations,
as shown in the left plot. Using a larger number of smaller elements makes knots and other manipulations even easier.
The loop is similar to a rope but the first and last element bodies are connected with an equality constraint.

**Cloth**.

|image12| |image13|

.. code-block:: xml

   <body name="B3_5" pos="0 0 1">
       <freejoint/>
       <composite type="cloth" count="9 9 1" spacing="0.05" flatinertia="0.01">
           <joint kind="main" damping="0.001"/>
           <skin material="matcarpet" texcoord="true" inflate="0.005" subgrid="2"/>
           <geom type="capsule" size="0.015 0.01" rgba=".8 .2 .1 1"/>
       </composite>
   </body>

The cloth type is an alternative to a 2D grid, and has somewhat different properties. Similar to rope vs. 1D grid, the
cloth is less jittery than a 2D grid and can also fill collision holes better. This is done by using capsules or
ellipsoids, and arranging them in the pattern shown on the right. The geom capsules are shown in red, the kinematic
tree in thick blue, the equality-constrained tendons holding the cloth together in thin gray, and the joints in cyan.
The element body corresponding to the parent body has a floating joint rendered as a cube, while the rest of the tree
is constructed using pairs of hinge joints that form universal joints. Note the naming of the parent body: similar to
rope, it must coincide with one of the automatically-generated element body names in the composite object. Explicit
pinning is not possible. However if the parent is a static body, the cloth is essentially pinned but only at one
point. Similar to rope, the cloth object involves long kinematic chains that require relatively small timesteps and
some damping for stable integration. The parameters can be found in the XML model files in the software distribution.

**Box**.

|image14| |image15|

.. code-block:: xml

   <body pos="0 0 1">
       <freejoint/>
       <composite type="box" count="7 7 7" spacing="0.04">
           <skin texcoord="true" material="matsponge" rgba=".7 .7 .7 1"/>
           <geom type="capsule" size=".015 0.05" rgba=".8 .2 .1 1"/>
       </composite>
   </body>

The box type, as well as the cylinder and ellipsoid types below, are used to model soft 3D objects. The element bodies
form a grid along the outer shell, thus the number of element bodies scales with the square of the linear dimension.
This is much more efficient than simulating a 3D grid. The parent body within which :el:`composite` appears is at the
center of the soft object. All element bodies are children of the parent. Each element body has a single sliding joint
pointing away from the parent. These joints allow the surface of the soft object to compress and expand at any point.
The joints are equality-constrained to their initial position, so as to maintain the shape. In addition each joint is
equality-constrained to its neighbor joints, so that when the soft objects deforms, the deformation is smooth.
Finally, there is a tendon equality constraint specifying that the sum of all joints should remain constant. This
attempts to preserve the volume of the soft object approximately. If the object is squeezed from all sides it will
compress and the volume will decrease, but otherwise some element bodies will stick out to compensate for squeezing
elsewhere. The plot on the left shows this effect; we are using the capsule probe to compress one corner, and the
opposite sides of the cube expand a bit, while the deformations remain smooth. The :at:`count` attribute determines
the number of element bodies in each dimension, so if the counts are different the resulting object will be a
rectangular box and not a cube. The geoms attached to the element bodies can be spheres, capsules or ellipsoids.
Spheres are faster for collision detection, but they result in a thin shell, allowing other bodies to "get under the
skin" of the soft object. When capsules or ellipsoids are used, they are automatically oriented so that the long axis
points to the outside, thus creating a thicker shell which is harder to penetrate.

**Cylinder and ellipsoid**.

|image16| |image17|

.. code-block:: xml

   <body pos="0 0 1">
       <freejoint/>
       <composite type="ellipsoid" count="5 7 9" spacing="0.05">
           <skin texcoord="true" material="matsponge" rgba=".7 .7 .7 1"/>
           <geom type="capsule" size=".015 0.05" rgba=".8 .2 .1 1"/>
       </composite>
   </body>

Cylinders and ellipsoids are created in the same was as boxes. The only difference is that the reference positions of
the element bodies (relative to the parent) are projected on a cylinder or ellipsoid, with size implied by the
:at:`count` attribute. The automatic skin generator is aware of the smooth surfaces, and adjusts the skin normals
accordingly. In the plots we have used the capsule probe to press on each body, then paused the simulation and moved the
probe away (which is possible because the probe is a mocap body which can move independent of the physics). In this way
we can see the indentation made by the probe, and the resulting deformation in the rest of the body. By changing the
solref and solimp attributes of the equality constraints that hold the soft object together, one can adjust the behavior
of the system making it softer or harder, damped or springy, etc. Note that box, cylinder and ellipsoid objects do not
involve long kinematic chains, and can be simulated at large timesteps - similar to particle and grid, and unlike rope
and cloth.

.. _CInclude:

Including files
~~~~~~~~~~~~~~~

MJCF files can include other XML files using the :ref:`include <include>` element. Mechanistically, the
parser replaces the DOM node corresponding to the include element in the master file with the list of XML elements
that are children of the top-level element in the included file. The top-level element itself is discarded, because it
is a grouping element for XML purposes and would violate the MJCF format if included.

This functionality enables modular MJCF models; see the MPL family of models in the model library. One example of
modularity is constructing a model of a robot (which tends to be elaborate) and then including it in multiple
"scenes", i.e. MJCF models defining the objects in the robot's environment. Another example is creating a file with
commonly used assets (say materials with carefully adjusted rgba values) and including it in multiple models which
reference those assets.

The included files are not required to be valid MJCF files on their own, but they usually are. Indeed we have designed
this mechanism to allow MJCF models to be included in other MJCF models. To make this possible, repeated MJCF sections
are allowed even when that does not make sense semantically in the context of a single model. For example, we allow
the kinematic tree to have multiple roots (i.e. multiple :el:`worldbody` elements) which are merged automatically by
the parser. Otherwise including robots into scenes would be impossible.

The flexibility of repeated MCJF sections comes at a price: global settings that apply to the entire model, such as
the :at:`angle` attribute of :ref:`compiler <compiler>` for example, can be defined multiple times.
MuJoCo allows this, and uses the last definition encountered in the composite model, after all include elements have
been processed. So if model A is defined in degrees and model B is defined in radians, and A is included in B after
the :el:`compiler` element in B, the entire composite model will be treated as if it was defined in degrees - leading
to undesirable consequences in this case. The user has to make sure that models included in each other are compatible
in this sense; local vs. global coordinates is another compatibility requirement.

Finally, as explained next, element names must be unique among all elements of the same type. So for example if the
same geom name is used in two models, and one model is included in the other, this will result in compile error.
Including the same XML file more than once is a parsing error. The reason for this restriction is that we want to
avoid repeated element names as well as infinite recursion caused by inclusion.

.. _CName:

Naming elements
~~~~~~~~~~~~~~~

Most model elements in MJCF can have names. They are defined with the attribute :at:`name` of the corresponding XML
element. When a given model element is named, its name must be unique among all elements of the same type. Names are
case-sensitive. They are used at compile time to reference the corresponding element, and are also saved in mjModel
for user convenience at runtime.

The name is usually an optional attribute. We recommend leaving it undefined (so as to keep the model file shorter)
unless there is a specific reason to define it. There can be several such reasons:

-  Some model elements need to reference other elements as part of their creation. For example, a spatial tendon needs
   to reference sites in order to specify the via points it passes through. Referencing can only be done by name. Note
   that assets exist for the sole purpose of being referenced, so they must have a name, however it can be omitted and
   set implicitly from the corresponding file name.
-  The visualizer offers the option to label all model elements of a given type. When a name is available, it is printed
   next to the object in the 3D view; otherwise a generic label in the format "body 7" is printed.
-  The function :ref:`mj_name2id` returns the index of the model element with given type and
   name. Conversely, the function :ref:`mj_id2name` returns the name given the index. This
   is useful for custom computations involving a model element that is identified by its name in the XML (as opposed to
   relying on a fixed index which can change when the model is edited).
-  The model file could in principle become more readable by naming certain elements. Keep in mind however that XML
   itself has a commenting mechanism, and that mechanism is more suitable for achieving readability - especially since
   most text editors provide syntax highlighting which detects XML comments.

.. _CURDF:

URDF extensions
~~~~~~~~~~~~~~~

The Unified Robot Description Format (URDF) is a popular XML file format in which many existing robots have been
modeled. This is why we have implemented support for URDF even though it can only represent a subset of the model
elements available in MuJoCo. In addition to standard URDF files, MuJoCo can load files that have a custom (from the
viewpoint of URDF) :el:`mujoco` element as a child of the top-level element :el:`robot`. This custom element can have
sub-elements :ref:`compiler <compiler>`, :ref:`option <option>`,
:ref:`size <size>` with the same functionality as in MJFC, except that the default compiler settings
are modified so as to accomodate the URDF modeling convention. The :ref:`compiler <compiler>` extension
in particular has proven very useful, and indeed several of its attributes were introduced because a number of
existing URDF models have non-physical dynamics parameters which MuJoCo's built-in compiler will reject if left
unmodified. This extension is also needed to specify mesh directories.

Note that the while MJCF models are checked against a custom XML schema by the parser, URDF models are not. Even the
MuJoCo-specific elements emebdded in the URDF file are not checked. As a result, mis-typed attribute names are
silently ignored, which can result in major confusion if the typo remains unnoticed.

Here is an example extension section of a URDF model:

.. code-block:: xml

   <robot name="darwin">
       <mujoco>
           <compiler meshdir="../mesh/darwin/" balanceinertia="true"/>
       </mujoco>
       <link name="MP_BODY">
           ...
   </robot>

The above extensions make URDF more usable but still limited. If the user wants to build models taking full advantage of
MuJoCo and at the same time maintain URDF compatibility, we recommend the following procedure. Introduce extensions in
the URDF as needed, load it and save it as MJCF. Then add information to the MJCF using
:ref:`include <include>` elements whenever possible. In this way, if the URDF is modified, the
corresponding MJCF can be easily re-created. In our experience though, URDF files tend to be static while MJCF files are
often edited. Thus in practice it is usually sufficient to convert the URDF to MJCF once and after that only work with
the MJCF.

.. _Tips:

Tips and tricks
---------------

Here we provide guidance on how to accomplish some common modeling tasks. There is no new material here, in the sense
that everything in this section can be inferred from the rest of the documentation. Nevertheless the inference process
is not always obvious, so it may be useful to have it spelled out.

.. _CBacklash:

Backlash
~~~~~~~~

Backlash is present in many robotic joints. It is usually caused by small gaps between gears in the gearbox, but could
also be caused by some sloppiness in the joint mechanism. The effect is that the motor can turn for a small angle before
the joint turns, or vice versa (when external force is applied on the joint). Backlash can be modeled in MuJoCo as
follows. Instead of having a single hinge joint within the body, define two hinge joints with identical position and
orientation:

.. code-block:: xml

   <body>
       <joint name="J1" type="hinge" pos="0 0 0" axis="0 0 1" armature="0.01"/>
       <joint name="J2" type="hinge" pos="0 0 0" axis="0 0 1" limited="true" range="-1 1"/>
   </body>

Thus the overall rotation of the body relative to its parent is J1+J2. Now define an actuator acting only on J1. The
small joint range on J2 keeps it near 0, yet allows it to move a bit in the direction of the force acting on it,
producing a backlash effect. Note the :at:`armature` attribute in J1. Without it the joint-space inertia matrix
will be singular, because the two joints could accelerate in opposite directions without encountering any inertia. The
physical gears responsible for the backlash actually have rotational inertia (which we call armature) so this is a
realistic modeling approach. The numbers in this example should be adjusted to obtain the desired behavior. The
:at:`solref` and :at:`solimp` parameters of the joint limit constraint could also be adjusted, to make the
backlash rotation end at a softer or a harder limit.

Instead of specifying joint limits in J2, one can specify a soft equality constraint keeping J2=0. The constraint
impedance function should then be adjusted so the constraint is weak near J2=0 and gets stronger away from 0. The new
parameterization of impedance functions shown in :ref:`Solver parameters <CSolver>` enables this. Compared to joint
limits, the equality constraint approach will generate a softer transition between the backlash regime and the limit
regime. It will also be active all the time, which is convenient in user code that needs the constraint violation or
constraint force as input.

.. _CDamping:

Damping
~~~~~~~

Damping generates a force proportional to velocity and opposite to it. In a physical system damping always increases
stability. But this is only because the Universe is equipped with an ideal continuous-time integrator which does not
accumulate errors due to time discretization. In a computer simulation where time is discretized, large damping can
destabilize the system because of integration errors. This was already discussed in the
:ref:`Computation <gePassive>` chapter.

The standard approach to reducing integration errors is to reduce the timestep or use the Runge-Kutta integrator, both
of which are effective but slow down the simulation. An alternative approach is to put all damping in the joints and
use the Euler integrator. In that case damping forces are integrated implicitly - meaning that the inertia matrix is
adjusted and re-factorized internally as part of the velocity update, in a way transparent to the user. Implicit
integration is much more stable than explicit integration, allowing substantially larger time steps. Note that the
Runge-Kutta integrator is explicit, and so is Euler except for the way it treats damping forces. Ideally we would have
a fully implicit integrator, but there is no publicly available physics engine that currently has such an integrator.
It is on our todo list for a future MuJoCo release.

Given this state of affairs, joint damping is better behaved than damping in tendons or actuators, because the latter
are not integrated implicitly. Now consider a velocity servo producing force:

::

       force = gain * (desired_velocity - current_velocity)

This can be modeled as a velocity actuator, however such an actuator adds damping to the system and could cause
instability when the gain is high. Instead we could split the above force in two terms. For the first term, define a
motor which generates force = gain \* desired_velocity, by treating desired_velocity as the control signal. For the
second term, add damping in the joint, with damping coefficient equal to the above servo gain. Now the overall force is
the same yet the damping component of the force is integrated implicitly.

.. _CRestitution:

Restitution
~~~~~~~~~~~

MuJoCo 2.0 introduced a new mechanism for specifying :at:`solref` as explained in :ref:`Solver parameters <CSolver>`.
When both numbers are non-positive, they are interpreted as (-stiffness, -damping) and scaled by the constraint
impedance. To achieve perfect restitution for contacts and other constraints, set stiffness to some reasonably large
value and damping to zero. Below is an example of a sphere bouncing on a plane with restitution coefficient of 1, so
that the energy before and after contact is approximately preserved. It is not exactly preserved because the contact
itself is soft and takes several time steps, and the (implicit) deformations during those time steps are not exactly
energy-preserving. But the overall effect is that the ball bounces for a very long time without changing its peak height
in a visible way, and the energy fluctuates around the initial value instead of drifting.

.. code-block:: xml

   <worldbody>
       <geom type="plane" size="1 1 .1"/>

       <body pos="0 0 1">
           <freejoint/>
           <geom type="sphere" size="0.1" solref="-1000 0"/>
       </body>
   </worldbody>

.. _CSize:

Model sizes
~~~~~~~~~~~

MuJoCo pre-allocates all the memory needed at runtime in mjData, and does not access the C/C++ memory manager after
model creation. It is therefore essential to allocate enough memory. The allocation is controlled by three size
parameters specified in the :ref:`size <size>` element, namely the stack size :at:`nstack`, the
maximum number of contacts :at:`nconmax`, and the maximum number of scalar constraints :at:`njmax`. The default
size settings use heuristics to allocate sufficient memory, but the true memory needs for a given model can only be
determined during simulation. If nstack is insufficient the simulator calls mju_error and gives up. If nconmax or
njmax are insufficient the remaining contacts or other constraints are discarded, and the simulation continues but the
results are not as desired. If on the other hand the allocation is too large, clearing mjData with mj_reset takes
longer, and in multi-threaded applications simulating many large models in parallel the machine could run out of
memory, or cache performance could be adversely affected. And even if nothing bad happens, allocating a lot more
memory than needed is just poor style.

So how do we know how much memory to allocate? mjData has fields maxuse_stack, maxuse_con and maxuse_efc which keep
track of the maximum memory utilization in each category since the last reset. The code sample `simulate.cc`_ shows
this data as a fraction of the maximum allocation (in the info window in the lower-left corner). So one can start with
the defaults, simulate for a while, and if the fractions are too small go back to the XML and set the allocation sizes
explicitly. Keep in mind though that memory utilization can change dramatically in the course of the simulation,
depending on how many constraints are active and also which constraint solver is used.
For example if the stack size is just sufficient for the CG solver, the Newton and PGS solvers will run out of stack.
When we design models, we usually aim for 50% utilization in the worst-case scenario encountered while exploring the
model. If you only intend to use the CG solver, you can get away with significantly smaller stack allocation.

.. _CMocap:

Motion capture
~~~~~~~~~~~~~~

Mocap bodies are static children of the world (i.e. have no joints) and their :at:`mocap` attribute is set to
"true". They can be used to input a data stream from a motion capture device into a MuJoCo simulation. Suppose you are
holding a VR controller, or an object instrumented with motion capture markers (e.g. Vicon), and want to have a
simulated object moving in the same way but also interacting with other simulated objects. There is a dilemma here:
virtual objects cannot push on your physical hand, so your hand (and thereby the object you are controlling) can
violate the simulated physics. But at the same time we want the resulting simulation to be reasonable. How do we do
this?

The first step is to define a mocap body in the MJCF model, and at implement code that reads the data stream at
runtime and sets mjModel.mocap_pos and mjModel.mocap_quat to the position and orientation received from the motion
capture system. The `simulate.cc <https://github.com/deepmind/mujoco/blob/main/sample/simulate.cc>`_ code sample uses
the mouse as a motion capture device, allowing the user to move mocap bodies around.

The key thing to understand about mocap bodies is that the simulator treats them as being fixed. We are causing them
to move from one simulation time step to the next by updating their position and orientation directly, but as far as
the physics model is concerned their position and orientation are constant. So what happens if we make contact with a
regular dynamic body, as in the composite object examples provided with the MuJoCo 2.0 distribution (recall that in
those example we have a capsule probe which is a mocap body that we move with the mouse). A contact between two
regular bodies will experience penetration as well as relative velocity, while contact with a mocap body is missing
the relative velocity component because the simulator does not know that the mocap body itself is moving. So the
resulting contact force is smaller and it takes longer for the contact to push the dynamic object away. Also, in more
complex simulations the fact that we are doing something inconsistent with the physics can cause instabilities.

There is however a better-behaved alternative. In addition to the mocap body, we include a second regular body and
connect it to the mocap body with a weld equality constraint. In the plots below, the pink box is the mocap body and
it is connected to the base of the hand. In the absence of other constraints, the hand tracks the mocap body almost
perfectly (and much better than a spring-damper would) because the constraints are handled implicitly and can produce
large forces without destabilizing the simulation. But if the hand is forced to make contact with the table for example
(right plot) it cannot simultaneously respect the contact constraint and track the mocap body. This is because the
mocap body is free to go through the table. So which constraint wins? That depends on the softness of the weld
constraint realtive to the contact constraint. The corresponding :at:`solref` and :at:`solimp` parameters need to be
adjusted so as to achieve the desired trade-off. See the Modular Prosthetic Limb (MPL) hand model available on the
MuJoCo Forum for an example; the plots below are generated with that model.

|image18| |image19|

.. |image0| image:: images/modeling/impedance.png
   :width: 600px
.. |image1| image:: images/modeling/musclemodel.png
   :width: 650px
.. |image2| image:: images/modeling/musclerange.png
   :width: 400px
.. |image3| image:: images/modeling/tendonwraps.png
   :width: 500px
.. |image4| image:: images/modeling/particle.png
   :height: 300px
.. |image5| image:: images/modeling/particle2.png
   :height: 300px
.. |image6| image:: images/modeling/grid1.png
   :height: 200px
.. |image7| image:: images/modeling/grid1pin.png
   :height: 200px
.. |image8| image:: images/modeling/grid2.png
   :height: 300px
.. |image9| image:: images/modeling/grid2pin.png
   :height: 300px
.. |image10| image:: images/modeling/rope.png
   :height: 200px
.. |image11| image:: images/modeling/loop.png
   :height: 200px
.. |image12| image:: images/modeling/cloth.png
   :height: 300px
.. |image13| image:: images/modeling/cloth2.png
   :height: 300px
.. |image14| image:: images/modeling/box.png
   :height: 300px
.. |image15| image:: images/modeling/box2.png
   :height: 300px
.. |image16| image:: images/modeling/cylinder.png
   :height: 300px
.. |image17| image:: images/modeling/ellipsoid.png
   :height: 300px
.. |image18| image:: images/modeling/mocap1.png
   :height: 250px
.. |image19| image:: images/modeling/mocap2.png
   :height: 250px
.. _simulate.cc: https://github.com/deepmind/mujoco/blob/main/sample/simulate.cc