Mujoco_WASM/python/mujoco/viewer.py

# Copyright 2022 DeepMind Technologies Limited
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ==============================================================================
"""Interactive GUI viewer for MuJoCo."""

import abc
import atexit
import code
import inspect
import math
import os
import sys
import threading
import time
from typing import Callable, Optional, Tuple, Union

import glfw
import mujoco
from mujoco import _simulate
import numpy as np

if not glfw._glfw:  # pylint: disable=protected-access
  raise RuntimeError('GLFW dynamic library handle is not available')
else:
  _simulate.set_glfw_dlhandle(glfw._glfw._handle)  # pylint: disable=protected-access

# Logarithmically spaced realtime slow-down coefficients (percent).
PERCENT_REALTIME = (
    100, 80, 66, 50, 40, 33, 25, 20, 16, 13,
    10, 8, 6.6, 5, 4, 3.3, 2.5, 2, 1.6, 1.3,
    1, 0.8, 0.66, 0.5, 0.4, 0.33, 0.25, 0.2, 0.16, 0.13,
    0.1
)

# Maximum time mis-alignment before re-sync.
MAX_SYNC_MISALIGN = 0.1

# Fraction of refresh available for simulation.
SIM_REFRESH_FRACTION = 0.7

CallbackType = Callable[[mujoco.MjModel, mujoco.MjData], None]
LoaderType = Callable[[], Tuple[mujoco.MjModel, mujoco.MjData]]

# Loader function that also returns a file path for the GUI to display.
_LoaderWithPathType = Callable[[], Tuple[mujoco.MjModel, mujoco.MjData, str]]
_InternalLoaderType = Union[LoaderType, _LoaderWithPathType]

Simulate = _simulate.Simulate


# Abstract base dispatcher class for systems that require UI calls to be made
# on a specific thread (e.g. macOS). This is subclassed by system-specific
# Python launcher (mjpython) to implement the required dispatching mechanism.
class _MjPythonBase(metaclass=abc.ABCMeta):

  def launch_on_ui_thread(self, model: mujoco.MjModel, data: mujoco.MjData):
    pass

# When running under mjpython, the launcher initializes this object.
_MJPYTHON: Optional[_MjPythonBase] = None


def _file_loader(path: str) -> _LoaderWithPathType:
  """Loads an MJCF model from file path."""

  def load(path=path) -> Tuple[mujoco.MjModel, mujoco.MjData, str]:
    m = mujoco.MjModel.from_xml_path(path)
    d = mujoco.MjData(m)
    return m, d, path

  return load


def _reload(
    simulate: Simulate, loader: _InternalLoaderType
) -> Optional[Tuple[mujoco.MjModel, mujoco.MjData]]:
  """Internal function for reloading a model in the viewer."""
  try:
    load_tuple = loader()
  except Exception as e:  # pylint: disable=broad-except
    simulate.load_error = str(e)
  else:
    m, d = load_tuple[:2]

    # If the loader does not raise an exception then we assume that it
    # successfully created mjModel and mjData. This is specified in the type
    # annotation, but we perform a runtime assertion here as well to prevent
    # possible segmentation faults.
    assert m is not None and d is not None

    path = load_tuple[2] if len(load_tuple) == 3 else ''
    simulate.load(m, d, path)

    return m, d


def _physics_loop(simulate: Simulate, loader: Optional[_InternalLoaderType]):
  """Physics loop for the GUI, to be run in a separate thread."""
  m: mujoco.MjModel = None
  d: mujoco.MjData = None
  ctrl_noise = np.array([])
  reload = True

  # CPU-sim synchronization point.
  synccpu = 0.0
  syncsim = 0.0

  # Run until asked to exit.
  while not simulate.exitrequest:
    if simulate.droploadrequest:
      simulate.droploadrequest = 0
      loader = _file_loader(simulate.dropfilename)
      reload = True

    if simulate.uiloadrequest:
      simulate.uiloadrequest_decrement()
      reload = True

    if reload and loader is not None:
      result = _reload(simulate, loader)
      if result is not None:
        m, d = result
        ctrl_noise = np.zeros((m.nu,))

    reload = False

    # Sleep for 1 ms or yield, to let main thread run.
    if simulate.run != 0 and simulate.busywait != 0:
      time.sleep(0)
    else:
      time.sleep(0.001)

    with simulate.lock():
      if m is not None:
        assert d is not None
        if simulate.run:
          # Record CPU time at start of iteration.
          startcpu = glfw.get_time()

          elapsedcpu = startcpu - synccpu
          elapsedsim = d.time - syncsim

          # Inject noise.
          if simulate.ctrl_noise_std != 0.0:
            # Convert rate and scale to discrete time (Ornstein–Uhlenbeck).
            rate = math.exp(-m.opt.timestep /
                            max(simulate.ctrl_noise_rate, mujoco.mjMINVAL))
            scale = simulate.ctrl_noise_std * math.sqrt(1 - rate * rate)

            for i in range(m.nu):
              # Update noise.
              ctrl_noise[i] = (rate * ctrl_noise[i] +
                               scale * mujoco.mju_standardNormal(None))

              # Apply noise.
              d.ctrl[i] = ctrl_noise[i]

          # Requested slow-down factor.
          slowdown = 100 / PERCENT_REALTIME[simulate.real_time_index]

          # Misalignment: distance from target sim time > MAX_SYNC_MISALIGN.
          misaligned = abs(elapsedcpu / slowdown -
                           elapsedsim) > MAX_SYNC_MISALIGN

          # Out-of-sync (for any reason): reset sync times, step.
          if (elapsedsim < 0 or elapsedcpu < 0 or synccpu == 0 or misaligned or
              simulate.speed_changed):
            # Re-sync.
            synccpu = startcpu
            syncsim = d.time
            simulate.speed_changed = False

            # Clear old perturbations, apply new.
            d.xfrc_applied[:, :] = 0
            simulate.apply_pose_perturbations(0)  # Move mocap bodies only.
            simulate.apply_force_perturbations()

            # Run single step, let next iteration deal with timing.
            mujoco.mj_step(m, d)

          # In-sync: step until ahead of cpu.
          else:
            measured = False
            prevsim = d.time
            refreshtime = SIM_REFRESH_FRACTION / simulate.refresh_rate
            # Step while sim lags behind CPU and within refreshtime.
            while (((d.time - syncsim) * slowdown <
                    (glfw.get_time() - synccpu)) and
                   ((glfw.get_time() - startcpu) < refreshtime)):
              # Measure slowdown before first step.
              if not measured and elapsedsim:
                simulate.measured_slowdown = elapsedcpu / elapsedsim
                measured = True

              # Clear old perturbations, apply new.
              d.xfrc_applied[:, :] = 0
              simulate.applyposepertubations(0)  # Move mocap bodies only.
              simulate.applyforceperturbations()

              # Call mj_step.
              mujoco.mj_step(m, d)

              # Break if reset.
              if d.time < prevsim:
                break
        else:  # simulate.run is False: GUI is paused.
          # Apply pose perturbation.
          simulate.applyposepertubations(1)  # Move mocap and dynamic bodies.

          # Run mj_forward, to update rendering and joint sliders.
          mujoco.mj_forward(m, d)


def _launch_internal(model: Optional[mujoco.MjModel] = None,
                     data: Optional[mujoco.MjData] = None,
                     *,
                     run_physics_thread: bool = True,
                     loader: Optional[_InternalLoaderType] = None,
                     simulate: Optional[Simulate] = None) -> None:
  """Internal API, so that the public API has more readable type annotations."""
  if model is None and data is not None:
    raise ValueError('mjData is specified but mjModel is not')
  elif callable(model) and data is not None:
    raise ValueError(
        'mjData should not be specified when an mjModel loader is used')
  elif loader is not None and model is not None:
    raise ValueError('model and loader are both specified')

  if loader is None and model is not None:

    def _loader(m=model, d=data) -> Tuple[mujoco.MjModel, mujoco.MjData]:
      if d is None:
        d = mujoco.MjData(m)
      return m, d

    loader = _loader

  # The simulate object encapsulates the UI.
  if simulate is None:
    simulate = Simulate()

  # Initialize GLFW if not using mjpython.
  if _MJPYTHON is None:
    if not glfw.init():
      raise mujoco.FatalError('could not initialize GLFW')
    atexit.register(glfw.terminate)

  side_thread = None
  if run_physics_thread:
    side_thread = threading.Thread(
        target=_physics_loop, args=(simulate, loader))
  else:
    side_thread = threading.Thread(
        target=_reload, args=(simulate, loader))

  def make_exit_requester(simulate):
    def exit_requester():
      simulate.exitrequest = True
    return exit_requester

  exit_requester = make_exit_requester(simulate)
  atexit.register(exit_requester)

  side_thread.start()
  simulate.render_loop()
  atexit.unregister(exit_requester)
  side_thread.join()


def launch(model: Optional[mujoco.MjModel] = None,
           data: Optional[mujoco.MjData] = None,
           *,
           run_physics_thread: bool = True,
           loader: Optional[LoaderType] = None) -> None:
  """Launches the Simulate GUI."""
  if not run_physics_thread:
    mujoco.mj_forward(model, data)
  _launch_internal(
      model, data, run_physics_thread=run_physics_thread, loader=loader)


def launch_from_path(path: str) -> None:
  """Launches the Simulate GUI from file path."""
  _launch_internal(loader=_file_loader(path))


def launch_passive(model: mujoco.MjModel, data: mujoco.MjData) -> None:
  """Launches a passive Simulate GUI without blocking the running thread."""
  if not isinstance(model, mujoco.MjModel):
    raise ValueError(f'`model` is not a mujoco.MjModel: got {model!r}')
  if not isinstance(data, mujoco.MjData):
    raise ValueError(f'`data` is not a mujoco.MjData: got {data!r}')

  mujoco.mj_forward(model, data)

  if sys.platform != 'darwin':
    thread = threading.Thread(
        target=_launch_internal,
        args=(model, data),
        kwargs=dict(run_physics_thread=False),
    )
    thread.daemon = True
    thread.start()
  else:
    if not isinstance(_MJPYTHON, _MjPythonBase):
      raise RuntimeError(
          '`launch_passive` requires that the Python script be run under '
          '`mjpython`')
    _MJPYTHON.launch_on_ui_thread(model, data)


def launch_repl(model: mujoco.MjModel, data: mujoco.MjData) -> None:
  """Launches the Simulate GUI in REPL mode."""
  ipython_shell = None
  try:
    import IPython  # pylint: disable=g-import-not-at-top
    ipython_shell = IPython.get_ipython()
    ipython_is_terminal_interactive_shell = isinstance(
        ipython_shell,
        IPython.terminal.interactiveshell.TerminalInteractiveShell)
  except ImportError:
    ipython_is_terminal_interactive_shell = False

  simulate = Simulate()
  viewer_is_running = True

  def start_shell(global_variables):
    if ipython_is_terminal_interactive_shell:
      ipython_shell.execution_count += 1

      # A SQLite connection can only be used on the same thread that opened it.
      # We cache the existing connection and reopen on the current thread.
      old_db = ipython_shell.history_manager.db
      ipython_shell.history_manager.init_db()
      ipython_shell.history_manager.new_session()

      try:
        # Replicate IPython main loop without exiting on keyboard interrupt,
        # unless the viewer window has already been closed.
        # (https://github.com/ipython/ipython/blob/8.9.0/IPython/terminal/interactiveshell.py#L701)
        while viewer_is_running and ipython_shell.keep_running:
          print(ipython_shell.separate_in, end='')
          try:
            c = ipython_shell.prompt_for_code()
          except EOFError:
            if not ipython_shell.confirm_exit or ipython_shell.ask_yes_no(
                'Do you really want to exit ([y]/n)?', 'y', 'n'):
              ipython_shell.ask_exit()
            if not ipython_shell.keep_running and simulate is not None:
              simulate.exitrequest = True
          else:
            if c:
              ipython_shell.run_cell(c, store_history=True)
      finally:
        # Close the temporary history DB connection and restore the old one.
        ipython_shell.history_manager.end_session()
        ipython_shell.history_manager.db.close()
        ipython_shell.history_manager.db = old_db
        ipython_shell.execution_count -= 1
    else:
      code.InteractiveConsole(locals=global_variables).interact()

  # End IPython history session on the main thread. We will need to open
  # a new session in the REPL thread.
  if ipython_is_terminal_interactive_shell:
    ipython_shell.history_manager.end_session()

  try:
    # Continue the IPython REPL session in a separate thread.
    repl_thread = threading.Thread(
        target=start_shell, args=(inspect.stack()[1][0].f_globals,))
    repl_thread.start()

    # Launch the viewer on the main thread.
    mujoco.mj_forward(model, data)
    _launch_internal(
        model, data, run_physics_thread=False, simulate=simulate)
    simulate = None

    # Wait until the REPL thread quits, then restore the IPython history
    # DB session on the main thread.
    viewer_is_running = False
    repl_thread.join()
  finally:
    if ipython_is_terminal_interactive_shell:
      ipython_shell.history_manager.new_session()


if __name__ == '__main__':
  from absl import app  # pylint: disable=g-import-not-at-top
  from absl import flags  # pylint: disable=g-import-not-at-top

  _MJCF_PATH = flags.DEFINE_string('mjcf', None, 'Path to MJCF file.')

  def main(argv) -> None:
    del argv
    if _MJCF_PATH.value is not None:
      launch_from_path(os.path.expanduser(_MJCF_PATH.value))
    else:
      launch()

  app.run(main)