重构改为标准化输出

2026-09-01 14:10:23 +08:00
parent 7533b298f1
commit bc87bd6d2d
10151 changed files with 1709487 additions and 11776 deletions
@@ -0,0 +1,59 @@
+{
+  "items": [
+    {
+      "acceptance_claims": [
+        {
+          "claim_kind": "single_connected_body",
+          "expected": {}
+        },
+        {
+          "claim_kind": "solid_count_equals",
+          "expected": {
+            "value": 1
+          }
+        }
+      ],
+      "assumptions": [
+        "Assume a rectangular base sized 120 mm by 80 mm by 10 mm thick.",
+        "Assume a vertical reinforcing rib centered on the base, 60 mm tall, 8 mm thick, and 70 mm long along the base."
+      ],
+      "draft_id": "draft_001",
+      "source_ids": [
+        "src_001"
+      ],
+      "statement": "Create one connected mounting plate in millimetres with a rectangular base and an attached vertical reinforcing rib, using reasonable assumed dimensions for the plate and rib where the source does not specify exact sizes."
+    },
+    {
+      "acceptance_claims": [
+        {
+          "claim_kind": "through_cylindrical_bore",
+          "expected": {
+            "count": 4,
+            "diameter_mm": 10,
+            "tolerance_mm": 0.1
+          }
+        },
+        {
+          "claim_kind": "circular_hole_pattern",
+          "expected": {
+            "count": 4,
+            "diameter_mm": 10,
+            "pitch_radius_mm": 35,
+            "tolerance_mm": 0.1
+          }
+        }
+      ],
+      "assumptions": [
+        "Assume each mounting hole is 10 mm in diameter.",
+        "Assume the four hole centers lie on a circular pattern with a 35 mm pitch radius, evenly spaced at 90-degree intervals."
+      ],
+      "draft_id": "draft_002",
+      "source_ids": [
+        "src_001"
+      ],
+      "statement": "Add four equally spaced mounting through holes to the plate, using a reasonable assumed hole size and bolt-circle spacing, and verify that the holes form a four-hole pattern."
+    }
+  ],
+  "revision": 1,
+  "schema_version": "cad.requirements-draft.v1"
+}