重构 改为标准化输出

backend/live-evals/20260831T103255Z/artifacts/cad_3cec6509f759/documents/requirements-draft-v1.json

@@ -0,0 +1,97 @@
+{
+  "items": [
+    {
+      "acceptance_claims": [
+        {
+          "claim_kind": "bbox_dimension_mm",
+          "expected": {
+            "axis": "x",
+            "tolerance_mm": 5,
+            "value": 120
+          }
+        },
+        {
+          "claim_kind": "bbox_dimension_mm",
+          "expected": {
+            "axis": "y",
+            "tolerance_mm": 5,
+            "value": 80
+          }
+        },
+        {
+          "claim_kind": "bbox_dimension_mm",
+          "expected": {
+            "axis": "z",
+            "tolerance_mm": 5,
+            "value": 30
+          }
+        },
+        {
+          "claim_kind": "visual",
+          "expected": {
+            "description": "Rectangular base with a vertical reinforcing rib attached to it."
+          }
+        }
+      ],
+      "assumptions": [
+        "Dimensions are interpreted in millimetres.",
+        "Base size is assumed to be approximately 120 mm x 80 mm x 10 mm.",
+        "The reinforcing rib is assumed to be centered on the base and oriented vertically."
+      ],
+      "draft_id": "draft_001",
+      "source_ids": [
+        "src_001"
+      ],
+      "statement": "Model the part as a single mounting plate in millimetres. Use these working assumptions unless the source is later refined: rectangular base approximately 120 mm by 80 mm by 10 mm, with one vertical reinforcing rib centered on the long axis and extending upward from the base."
+    },
+    {
+      "acceptance_claims": [
+        {
+          "claim_kind": "solid_count_equals",
+          "expected": {
+            "value": 1
+          }
+        },
+        {
+          "claim_kind": "single_connected_body",
+          "expected": {}
+        }
+      ],
+      "assumptions": [],
+      "draft_id": "draft_002",
+      "source_ids": [
+        "src_001"
+      ],
+      "statement": "The model shall be a single connected solid body representing the full mounting plate assembly, with no separate disconnected bodies."
+    },
+    {
+      "acceptance_claims": [
+        {
+          "claim_kind": "through_cylindrical_bore",
+          "expected": {
+            "count": 4,
+            "diameter_mm": 8,
+            "tolerance_mm": 0.2
+          }
+        },
+        {
+          "claim_kind": "circular_hole_pattern",
+          "expected": {
+            "count": 4,
+            "diameter_mm": 8,
+            "pitch_radius_mm": 35,
+            "tolerance_mm": 0.5
+          }
+        }
+      ],
+      "assumptions": [],
+      "draft_id": "draft_003",
+      "source_ids": [
+        "src_001"
+      ],
+      "statement": "Add four mounting through holes arranged as an equally spaced circular pattern on the plate."
+    }
+  ],
+  "revision": 1,
+  "schema_version": "cad.requirements-draft.v1"
+}

backend/live-evals/20260831T103255Z/artifacts/cad_3cec6509f759/documents/requirements-review-v1.json

@@ -0,0 +1,36 @@
+{
+  "coverage": [
+    {
+      "requirement_ids": [
+        "req_001",
+        "req_002",
+        "req_003"
+      ],
+      "source_id": "src_001"
+    }
+  ],
+  "issues": [
+    "Draft 003 changes the source requirement from four equally spaced mounting through holes to an equally spaced circular pattern with a 35 mm pitch radius; the source does not specify a circular bolt circle, so that geometry is an added unverifiable assumption. The source also asks to verify the four-hole pattern, but the draft does not explicitly require the"
+  ],
+  "item_verdicts": [
+    {
+      "draft_id": "draft_001",
+      "question": null,
+      "reason_code": "none",
+      "verdict": "pass"
+    },
+    {
+      "draft_id": "draft_002",
+      "question": null,
+      "reason_code": "none",
+      "verdict": "pass"
+    },
+    {
+      "draft_id": "draft_003",
+      "question": "Should the four equally spaced mounting holes be on a circular bolt pattern, or should they be equally spaced in another layout such as a rectangular pattern?",
+      "reason_code": "claim_unverifiable",
+      "verdict": "waiting_for_user"
+    }
+  ],
+  "verdict": "waiting_for_user"
+}

backend/live-evals/20260831T103255Z/artifacts/cad_3cec6509f759/documents/source-index.json

@@ -0,0 +1,6 @@
+{
+  "schema_version": "cad.source-index.v1",
+  "sources": {
+    "src_001": "Create one connected mounting plate in millimetres with a rectangular base, a vertical reinforcing rib, and four equally spaced mounting through holes. State reasonable dimensions as assumptions, then verify a single connected solid and the four-hole pattern."
+  }
+}

backend/live-evals/20260831T103255Z/artifacts/cad_3cec6509f759/source-requirements.md

@@ -0,0 +1 @@
+Create one connected mounting plate in millimetres with a rectangular base, a vertical reinforcing rib, and four equally spaced mounting through holes. State reasonable dimensions as assumptions, then verify a single connected solid and the four-hole pattern.