重构 改为标准化输出

backend/live-evals/20260831T104758Z/artifacts/cad_bfeb36246109/completion.md

@@ -0,0 +1,4 @@
+# Completion
+
+- [ ] req_001: Create one connected mounting plate in millimetres with a rectangular base and an integral vertical reinforcing rib. Use reasonable assumptions for the unlabeled dimensions: base 120 mm x 80 mm x 10 mm, rib 80 mm tall x 8 mm thick running along one long edge, and all edges blended only if needed for manufacturability.
+- [ ] req_002: Add four mounting through holes to the plate as an evenly spaced hole pattern suitable for mounting. Assume 6 mm hole diameter and place the holes symmetrically on the base so the pattern is repeatable and clearly distinct from the rib.

backend/live-evals/20260831T104758Z/artifacts/cad_bfeb36246109/documents/requirements-draft-v1.json

@@ -0,0 +1,76 @@
+{
+  "items": [
+    {
+      "acceptance_claims": [
+        {
+          "claim_kind": "single_connected_body",
+          "expected": {}
+        },
+        {
+          "claim_kind": "bbox_dimension_mm",
+          "expected": {
+            "axis": "x",
+            "tolerance_mm": 0.5,
+            "value": 120
+          }
+        },
+        {
+          "claim_kind": "bbox_dimension_mm",
+          "expected": {
+            "axis": "y",
+            "tolerance_mm": 0.5,
+            "value": 80
+          }
+        },
+        {
+          "claim_kind": "bbox_dimension_mm",
+          "expected": {
+            "axis": "z",
+            "tolerance_mm": 0.5,
+            "value": 80
+          }
+        }
+      ],
+      "assumptions": [
+        "The plate is modeled as one solid body in millimetres.",
+        "The reinforcing rib is integral to the base and does not create a separate body.",
+        "Unspecified dimensions are set to practical defaults that preserve a compact mounting plate form."
+      ],
+      "draft_id": "draft_001",
+      "source_ids": [
+        "src_001"
+      ],
+      "statement": "Create one connected mounting plate in millimetres with a rectangular base and an integral vertical reinforcing rib. Use reasonable assumptions for the unlabeled dimensions: base 120 mm x 80 mm x 10 mm, rib 80 mm tall x 8 mm thick running along one long edge, and all edges blended only if needed for manufacturability."
+    },
+    {
+      "acceptance_claims": [
+        {
+          "claim_kind": "through_cylindrical_bore",
+          "expected": {
+            "count": 4,
+            "diameter_mm": 6,
+            "tolerance_mm": 0.2
+          }
+        },
+        {
+          "claim_kind": "visual",
+          "expected": {
+            "description": "Four evenly spaced through holes are present on the rectangular mounting base and are arranged symmetrically as a mounting pattern."
+          }
+        }
+      ],
+      "assumptions": [
+        "The four mounting holes are through holes.",
+        "The holes are laid out as a symmetric pattern on the rectangular base.",
+        "Exact edge offsets are selected to keep the holes clear of the rib and maintain practical wall thickness."
+      ],
+      "draft_id": "draft_002",
+      "source_ids": [
+        "src_001"
+      ],
+      "statement": "Add four mounting through holes to the plate as an evenly spaced hole pattern suitable for mounting. Assume 6 mm hole diameter and place the holes symmetrically on the base so the pattern is repeatable and clearly distinct from the rib."
+    }
+  ],
+  "revision": 1,
+  "schema_version": "cad.requirements-draft.v1"
+}

backend/live-evals/20260831T104758Z/artifacts/cad_bfeb36246109/documents/requirements-review-v1.json

@@ -0,0 +1,30 @@
+{
+  "coverage": [
+    {
+      "requirement_ids": [
+        "req_001",
+        "req_002"
+      ],
+      "source_id": "src_001"
+    }
+  ],
+  "issues": [
+    "Draft items split one source requirement into body and hole pattern, but together they cover the requested mounting plate, rib, assumptions, connected solid verification, and four-hole verification.",
+    "Draft statements do not explicitly state hole spacing dimensions, so 'equally spaced' is asserted qualitatively rather than dimensioned; feasible but could be strengthened by specifying pitch or coordinates."
+  ],
+  "item_verdicts": [
+    {
+      "draft_id": "draft_001",
+      "question": null,
+      "reason_code": "none",
+      "verdict": "pass"
+    },
+    {
+      "draft_id": "draft_002",
+      "question": null,
+      "reason_code": "none",
+      "verdict": "pass"
+    }
+  ],
+  "verdict": "pass"
+}

backend/live-evals/20260831T104758Z/artifacts/cad_bfeb36246109/documents/source-index.json

@@ -0,0 +1,6 @@
+{
+  "schema_version": "cad.source-index.v1",
+  "sources": {
+    "src_001": "Create one connected mounting plate in millimetres with a rectangular base, a vertical reinforcing rib, and four equally spaced mounting through holes. State reasonable dimensions as assumptions, then verify a single connected solid and the four-hole pattern."
+  }
+}

backend/live-evals/20260831T104758Z/artifacts/cad_bfeb36246109/requirements-contract.json

@@ -0,0 +1,85 @@
+{
+  "contract_hash": "a71e9bd95cf8a7e976cd3dd90cb68a1d043380604d3547565d7d43d5f877a94f",
+  "requirements": [
+    {
+      "acceptance_claims": [
+        {
+          "claim_id": "claim_001",
+          "claim_kind": "single_connected_body",
+          "expected": {}
+        },
+        {
+          "claim_id": "claim_002",
+          "claim_kind": "bbox_dimension_mm",
+          "expected": {
+            "axis": "x",
+            "tolerance_mm": 0.5,
+            "value": 120
+          }
+        },
+        {
+          "claim_id": "claim_003",
+          "claim_kind": "bbox_dimension_mm",
+          "expected": {
+            "axis": "y",
+            "tolerance_mm": 0.5,
+            "value": 80
+          }
+        },
+        {
+          "claim_id": "claim_004",
+          "claim_kind": "bbox_dimension_mm",
+          "expected": {
+            "axis": "z",
+            "tolerance_mm": 0.5,
+            "value": 80
+          }
+        }
+      ],
+      "assumptions": [
+        "The plate is modeled as one solid body in millimetres.",
+        "The reinforcing rib is integral to the base and does not create a separate body.",
+        "Unspecified dimensions are set to practical defaults that preserve a compact mounting plate form."
+      ],
+      "draft_id": "draft_001",
+      "requirement_id": "req_001",
+      "source_ids": [
+        "src_001"
+      ],
+      "statement": "Create one connected mounting plate in millimetres with a rectangular base and an integral vertical reinforcing rib. Use reasonable assumptions for the unlabeled dimensions: base 120 mm x 80 mm x 10 mm, rib 80 mm tall x 8 mm thick running along one long edge, and all edges blended only if needed for manufacturability."
+    },
+    {
+      "acceptance_claims": [
+        {
+          "claim_id": "claim_005",
+          "claim_kind": "through_cylindrical_bore",
+          "expected": {
+            "count": 4,
+            "diameter_mm": 6,
+            "tolerance_mm": 0.2
+          }
+        },
+        {
+          "claim_id": "claim_006",
+          "claim_kind": "visual",
+          "expected": {
+            "description": "Four evenly spaced through holes are present on the rectangular mounting base and are arranged symmetrically as a mounting pattern."
+          }
+        }
+      ],
+      "assumptions": [
+        "The four mounting holes are through holes.",
+        "The holes are laid out as a symmetric pattern on the rectangular base.",
+        "Exact edge offsets are selected to keep the holes clear of the rib and maintain practical wall thickness."
+      ],
+      "draft_id": "draft_002",
+      "requirement_id": "req_002",
+      "source_ids": [
+        "src_001"
+      ],
+      "statement": "Add four mounting through holes to the plate as an evenly spaced hole pattern suitable for mounting. Assume 6 mm hole diameter and place the holes symmetrically on the base so the pattern is repeatable and clearly distinct from the rib."
+    }
+  ],
+  "schema_version": "cad.requirements-contract.v1",
+  "task_id": "cad_bfeb36246109"
+}

backend/live-evals/20260831T104758Z/artifacts/cad_bfeb36246109/requirements-index.json

@@ -0,0 +1,21 @@
+{
+  "requirements": [
+    {
+      "claim_ids": [
+        "claim_001",
+        "claim_002",
+        "claim_003",
+        "claim_004"
+      ],
+      "requirement_id": "req_001"
+    },
+    {
+      "claim_ids": [
+        "claim_005",
+        "claim_006"
+      ],
+      "requirement_id": "req_002"
+    }
+  ],
+  "schema_version": "cad.requirements-index.v1"
+}

backend/live-evals/20260831T104758Z/artifacts/cad_bfeb36246109/requirements.md

@@ -0,0 +1,10 @@
+# Requirements
+
+- req_001: Create one connected mounting plate in millimetres with a rectangular base and an integral vertical reinforcing rib. Use reasonable assumptions for the unlabeled dimensions: base 120 mm x 80 mm x 10 mm, rib 80 mm tall x 8 mm thick running along one long edge, and all edges blended only if needed for manufacturability.
+  - Assumption: The plate is modeled as one solid body in millimetres.
+  - Assumption: The reinforcing rib is integral to the base and does not create a separate body.
+  - Assumption: Unspecified dimensions are set to practical defaults that preserve a compact mounting plate form.
+- req_002: Add four mounting through holes to the plate as an evenly spaced hole pattern suitable for mounting. Assume 6 mm hole diameter and place the holes symmetrically on the base so the pattern is repeatable and clearly distinct from the rib.
+  - Assumption: The four mounting holes are through holes.
+  - Assumption: The holes are laid out as a symmetric pattern on the rectangular base.
+  - Assumption: Exact edge offsets are selected to keep the holes clear of the rib and maintain practical wall thickness.

backend/live-evals/20260831T104758Z/artifacts/cad_bfeb36246109/source-requirements.md

@@ -0,0 +1 @@
+Create one connected mounting plate in millimetres with a rectangular base, a vertical reinforcing rib, and four equally spaced mounting through holes. State reasonable dimensions as assumptions, then verify a single connected solid and the four-hole pattern.