{
  "schema": "cad.cdsl.llm.v1",
  "schema_version": "1.1.0",
  "kind": "part",
  "part_id": "126271",
  "geometry": {
    "sketches": [
      {
        "id": "sk_001",
        "name": "原点",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": []
        }
      },
      {
        "id": "sk_002",
        "name": "草图1",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            0.0,
            0.0,
            1.0
          ],
          "y_dir": [
            0.707106781,
            0.0,
            -0.707106781
          ],
          "normal": [
            -0.0,
            1.0,
            0.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    -23.0,
                    -23.0
                  ],
                  "end": [
                    23.0,
                    -23.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    23.0,
                    -23.0
                  ],
                  "end": [
                    23.0,
                    23.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    23.0,
                    23.0
                  ],
                  "end": [
                    -23.0,
                    23.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -23.0,
                    23.0
                  ],
                  "end": [
                    -23.0,
                    -23.0
                  ]
                }
              ]
            },
            {
              "role": "inner",
              "closed": true,
              "segments": [
                {
                  "type": "circle",
                  "center": [
                    0.0,
                    0.0
                  ],
                  "radius_mm": 14.0
                }
              ]
            }
          ]
        }
      },
      {
        "id": "sk_003",
        "name": "草图2",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            0.0,
            0.0,
            1.0
          ],
          "y_dir": [
            0.707106781,
            0.0,
            -0.707106781
          ],
          "normal": [
            -0.0,
            1.0,
            0.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    -13.989637029,
                    15.0
                  ],
                  "end": [
                    -15.0,
                    13.25
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -15.0,
                    13.25
                  ],
                  "end": [
                    -15.5,
                    13.25
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -15.5,
                    13.25
                  ],
                  "end": [
                    -15.5,
                    12.5
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -15.5,
                    12.5
                  ],
                  "end": [
                    -22.5095,
                    12.5
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -22.5095,
                    12.5
                  ],
                  "end": [
                    -23.0,
                    12.0095
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -23.0,
                    12.0095
                  ],
                  "end": [
                    -23.0,
                    15.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -23.0,
                    15.0
                  ],
                  "end": [
                    -13.989637029,
                    15.0
                  ]
                }
              ]
            }
          ],
          "construction": [
            {
              "type": "line",
              "start": [
                -23.0,
                15.0
              ],
              "end": [
                -13.989637029,
                15.0
              ]
            }
          ]
        }
      },
      {
        "id": "sk_004",
        "name": "草图3",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            0.0,
            0.0,
            1.0
          ],
          "y_dir": [
            0.707106781,
            0.0,
            -0.707106781
          ],
          "normal": [
            -0.0,
            1.0,
            0.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    -23.0,
                    -15.0
                  ],
                  "end": [
                    -23.0,
                    -12.0095
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -23.0,
                    -12.0095
                  ],
                  "end": [
                    -22.5095,
                    -12.5
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -22.5095,
                    -12.5
                  ],
                  "end": [
                    -15.5,
                    -12.5
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -15.5,
                    -12.5
                  ],
                  "end": [
                    -15.5,
                    -13.25
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -15.5,
                    -13.25
                  ],
                  "end": [
                    -15.0,
                    -13.25
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -15.0,
                    -13.25
                  ],
                  "end": [
                    -13.989637029,
                    -15.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -13.989637029,
                    -15.0
                  ],
                  "end": [
                    -23.0,
                    -15.0
                  ]
                }
              ]
            }
          ],
          "construction": [
            {
              "type": "line",
              "start": [
                -13.989637029,
                -15.0
              ],
              "end": [
                -23.0,
                -15.0
              ]
            }
          ]
        }
      },
      {
        "id": "sk_005",
        "name": "草图4",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            0.0,
            0.0,
            1.0
          ],
          "y_dir": [
            0.707106781,
            0.0,
            -0.707106781
          ],
          "normal": [
            -0.0,
            1.0,
            0.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    -13.989637029,
                    15.0
                  ],
                  "end": [
                    -15.0,
                    13.25
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -15.0,
                    13.25
                  ],
                  "end": [
                    -15.5,
                    13.25
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -15.5,
                    13.25
                  ],
                  "end": [
                    -15.5,
                    12.5
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -15.5,
                    12.5
                  ],
                  "end": [
                    -22.5095,
                    12.5
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -22.5095,
                    12.5
                  ],
                  "end": [
                    -23.0,
                    12.0095
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -23.0,
                    12.0095
                  ],
                  "end": [
                    -23.0,
                    15.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -23.0,
                    15.0
                  ],
                  "end": [
                    -13.989637029,
                    15.0
                  ]
                }
              ]
            }
          ],
          "construction": [
            {
              "type": "line",
              "start": [
                -23.0,
                15.0
              ],
              "end": [
                -13.989637029,
                15.0
              ]
            }
          ]
        }
      },
      {
        "id": "sk_006",
        "name": "草图5",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            0.0,
            0.0,
            1.0
          ],
          "y_dir": [
            0.707106781,
            0.0,
            -0.707106781
          ],
          "normal": [
            -0.0,
            1.0,
            0.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    -23.0,
                    -15.0
                  ],
                  "end": [
                    -23.0,
                    -12.0095
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -23.0,
                    -12.0095
                  ],
                  "end": [
                    -22.5095,
                    -12.5
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -22.5095,
                    -12.5
                  ],
                  "end": [
                    -15.5,
                    -12.5
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -15.5,
                    -12.5
                  ],
                  "end": [
                    -15.5,
                    -13.25
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -15.5,
                    -13.25
                  ],
                  "end": [
                    -15.0,
                    -13.25
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -15.0,
                    -13.25
                  ],
                  "end": [
                    -13.989637029,
                    -15.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -13.989637029,
                    -15.0
                  ],
                  "end": [
                    -23.0,
                    -15.0
                  ]
                }
              ]
            }
          ],
          "construction": [
            {
              "type": "line",
              "start": [
                -13.989637029,
                -15.0
              ],
              "end": [
                -23.0,
                -15.0
              ]
            }
          ]
        }
      },
      {
        "id": "sk_007",
        "name": "草图6",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    0.0,
                    14.0
                  ],
                  "end": [
                    2.5,
                    14.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    2.5,
                    14.0
                  ],
                  "end": [
                    2.5,
                    16.380952381
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    2.5,
                    16.380952381
                  ],
                  "end": [
                    2.0,
                    16.380952381
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    2.0,
                    16.380952381
                  ],
                  "end": [
                    2.0,
                    18.166666667
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    2.0,
                    18.166666667
                  ],
                  "end": [
                    0.0,
                    18.166666667
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    0.0,
                    18.166666667
                  ],
                  "end": [
                    0.0,
                    14.0
                  ]
                }
              ]
            }
          ],
          "construction": [
            {
              "type": "line",
              "start": [
                70.0,
                0.0
              ],
              "end": [
                0.0,
                0.0
              ]
            }
          ]
        }
      },
      {
        "id": "sk_008",
        "name": "草图7",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    67.5,
                    14.0
                  ],
                  "end": [
                    70.0,
                    14.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    70.0,
                    14.0
                  ],
                  "end": [
                    70.0,
                    18.166666667
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    70.0,
                    18.166666667
                  ],
                  "end": [
                    68.0,
                    18.166666667
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    68.0,
                    18.166666667
                  ],
                  "end": [
                    68.0,
                    16.380952381
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    68.0,
                    16.380952381
                  ],
                  "end": [
                    67.5,
                    16.380952381
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    67.5,
                    16.380952381
                  ],
                  "end": [
                    67.5,
                    14.0
                  ]
                }
              ]
            }
          ],
          "construction": [
            {
              "type": "line",
              "start": [
                70.0,
                0.0
              ],
              "end": [
                0.0,
                0.0
              ]
            }
          ]
        }
      },
      {
        "id": "sk_009",
        "name": "For barrel",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": []
        }
      },
      {
        "id": "sk_010",
        "name": "For piston",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": []
        }
      }
    ]
  },
  "features": [
    {
      "id": "f_001",
      "name": "前视基准面",
      "atomic_id": "reference_plane",
      "depends_on": [],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            1.0,
            0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 10
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_002",
      "name": "上视基准面",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_001"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 10
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_003",
      "name": "右视基准面",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_002"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            1.0,
            0.0,
            0.0
          ],
          "x_dir": [
            0.0,
            1.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 10
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_004",
      "name": "凸台-拉伸1",
      "atomic_id": "extrude_add_blind",
      "depends_on": [
        "f_003"
      ],
      "params": {
        "distance_mm": 70.0,
        "reverse": false,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        },
        "reverse_distance_mm": 70.0,
        "reverse_end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_002"
    },
    {
      "id": "f_005",
      "name": "基准面1",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_003"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            35.0,
            0.0,
            0.0
          ],
          "normal": [
            1.0,
            0.0,
            0.0
          ],
          "x_dir": [
            0.0,
            1.0,
            0.0
          ]
        },
        "offset_mm": 35.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 5,
        "references": [
          {
            "kind": "plane",
            "stable_id": "deb6d30555812398da6cd3fc22d11f9b466e167f3f31b37e2945d405c3755631",
            "source": "solidworks",
            "confidence": 1.0,
            "owner_feature_id": "f_003"
          }
        ]
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "plane",
          "stable_id": "deb6d30555812398da6cd3fc22d11f9b466e167f3f31b37e2945d405c3755631",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_003"
        }
      ]
    },
    {
      "id": "f_012",
      "name": "基准面4",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_003"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            5.0,
            0.0,
            0.0
          ],
          "normal": [
            1.0,
            0.0,
            0.0
          ],
          "x_dir": [
            0.0,
            1.0,
            0.0
          ]
        },
        "offset_mm": 5.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 5,
        "references": [
          {
            "kind": "plane",
            "stable_id": "deb6d30555812398da6cd3fc22d11f9b466e167f3f31b37e2945d405c3755631",
            "source": "solidworks",
            "confidence": 1.0,
            "owner_feature_id": "f_003"
          }
        ]
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "plane",
          "stable_id": "deb6d30555812398da6cd3fc22d11f9b466e167f3f31b37e2945d405c3755631",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_003"
        }
      ]
    },
    {
      "id": "f_006",
      "name": "基准面2",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_005"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            0.0,
            0.0,
            1.0
          ],
          "y_dir": [
            0.707106781,
            0.0,
            -0.707106781
          ],
          "normal": [
            -0.0,
            1.0,
            0.0
          ]
        },
        "offset_mm": 25.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 5,
        "references": [
          {
            "kind": "feature",
            "stable_id": "ff22c44702be831ebda34784afa989cd02d3f263decf557839a5e5adc8b8390a",
            "source": "solidworks",
            "confidence": 1.0,
            "owner_feature_id": "f_005"
          }
        ],
        "derived_from_sketch_id": "sk_003"
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "ff22c44702be831ebda34784afa989cd02d3f263decf557839a5e5adc8b8390a",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_005"
        }
      ]
    },
    {
      "id": "f_009",
      "name": "基准面3",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_005"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            0.0,
            0.0,
            1.0
          ],
          "y_dir": [
            0.707106781,
            0.0,
            -0.707106781
          ],
          "normal": [
            -0.0,
            1.0,
            0.0
          ]
        },
        "offset_mm": 25.0,
        "angle_rad": 0.0,
        "reverse": true,
        "solidworks_type": 5,
        "references": [
          {
            "kind": "feature",
            "stable_id": "ff22c44702be831ebda34784afa989cd02d3f263decf557839a5e5adc8b8390a",
            "source": "solidworks",
            "confidence": 1.0,
            "owner_feature_id": "f_005"
          }
        ],
        "derived_from_sketch_id": "sk_005"
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "ff22c44702be831ebda34784afa989cd02d3f263decf557839a5e5adc8b8390a",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_005"
        }
      ]
    },
    {
      "id": "f_013",
      "name": "切除-旋转5",
      "atomic_id": "revolve_cut",
      "depends_on": [
        "f_001",
        "f_004"
      ],
      "params": {
        "angle_deg": 360.0,
        "axis": {
          "origin_mm": [
            70.0,
            0.0,
            0.0
          ],
          "direction": [
            -1.0,
            0.0,
            0.0
          ]
        },
        "reverse": true,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_007",
      "selectors": [
        {
          "kind": "axis",
          "stable_id": "6e33a40fec4ccc37fa01006500c68be1158cabff873b25c5fcd70f89542bb7f3",
          "source": "solidworks",
          "confidence": 1.0,
          "geometry": {
            "start": [
              0.07,
              0.0,
              0.0
            ],
            "end": [
              0.0,
              0.0,
              0.0
            ]
          }
        }
      ]
    },
    {
      "id": "f_014",
      "name": "切除-旋转6",
      "atomic_id": "revolve_cut",
      "depends_on": [
        "f_001",
        "f_004"
      ],
      "params": {
        "angle_deg": 360.0,
        "axis": {
          "origin_mm": [
            70.0,
            0.0,
            0.0
          ],
          "direction": [
            -1.0,
            0.0,
            0.0
          ]
        },
        "reverse": true,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_008",
      "selectors": [
        {
          "kind": "axis",
          "stable_id": "d212786d8bccdffbff5b63539356d02d4f6a62c68a2c31986def8f026ded1905",
          "source": "solidworks",
          "confidence": 1.0,
          "geometry": {
            "start": [
              0.07,
              0.0,
              0.0
            ],
            "end": [
              0.0,
              0.0,
              0.0
            ]
          }
        }
      ]
    },
    {
      "id": "f_027",
      "name": "基准面5",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_004"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "x_dir": [
            0.0,
            0.0,
            -1.0
          ],
          "normal": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 1,
        "references": [
          {
            "kind": "feature",
            "stable_id": "cfdba9bb67ccbcbafd3891c943c0eda845ce9082591e3244fad9f59f8e6e8b58",
            "source": "solidworks",
            "confidence": 1.0,
            "owner_feature_id": "f_004"
          },
          {
            "kind": "face",
            "stable_id": "a0346ebdcee16181e3496a0afabdb8d426ec6a8e64c3f78af6cb93c21da67992",
            "source": "solidworks",
            "confidence": 1.0,
            "geometry": {
              "surface": {
                "type": "plane",
                "parameters": [
                  1.0,
                  0.0,
                  0.0,
                  0.0,
                  0.0,
                  0.0
                ]
              },
              "box": [
                0.0,
                -0.023,
                -0.023,
                0.0,
                0.023,
                0.023
              ],
              "area": 0.001079187157852768
            }
          },
          {
            "kind": "face",
            "stable_id": "f8959d91b4205428c9490ebd3885fb4f66e25610807b4f08706111a8d8de3739",
            "source": "solidworks",
            "confidence": 1.0,
            "geometry": {
              "surface": {
                "type": "plane",
                "parameters": [
                  1.0,
                  0.0,
                  0.0,
                  0.07,
                  0.0,
                  0.0
                ]
              },
              "box": [
                0.07,
                -0.023,
                -0.023,
                0.07,
                0.023,
                0.023
              ],
              "area": 0.0010791871578527674
            }
          }
        ]
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "cfdba9bb67ccbcbafd3891c943c0eda845ce9082591e3244fad9f59f8e6e8b58",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_004"
        },
        {
          "kind": "face",
          "stable_id": "a0346ebdcee16181e3496a0afabdb8d426ec6a8e64c3f78af6cb93c21da67992",
          "source": "solidworks",
          "confidence": 1.0,
          "geometry": {
            "surface": {
              "type": "plane",
              "parameters": [
                1.0,
                0.0,
                0.0,
                0.0,
                0.0,
                0.0
              ]
            },
            "box": [
              0.0,
              -0.023,
              -0.023,
              0.0,
              0.023,
              0.023
            ],
            "area": 0.001079187157852768
          }
        },
        {
          "kind": "face",
          "stable_id": "f8959d91b4205428c9490ebd3885fb4f66e25610807b4f08706111a8d8de3739",
          "source": "solidworks",
          "confidence": 1.0,
          "geometry": {
            "surface": {
              "type": "plane",
              "parameters": [
                1.0,
                0.0,
                0.0,
                0.07,
                0.0,
                0.0
              ]
            },
            "box": [
              0.07,
              -0.023,
              -0.023,
              0.07,
              0.023,
              0.023
            ],
            "area": 0.0010791871578527674
          }
        }
      ]
    },
    {
      "id": "f_007",
      "name": "切除-旋转1",
      "atomic_id": "revolve_cut",
      "depends_on": [
        "f_006",
        "f_004"
      ],
      "params": {
        "angle_deg": 360.0,
        "axis": {
          "origin_mm": [
            -23.0,
            15.0,
            0.0
          ],
          "direction": [
            1.0,
            0.0,
            0.0
          ]
        },
        "reverse": true,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_003",
      "selectors": [
        {
          "kind": "axis",
          "stable_id": "4332f2ff76495d8b564c9695062e417a3e7a58e5535acbbb729e0b645ba80f58",
          "source": "solidworks",
          "confidence": 1.0,
          "geometry": {
            "start": [
              -0.023,
              0.014999999999999986,
              0.0
            ],
            "end": [
              -0.013989637028918155,
              0.015000000000000015,
              0.0
            ]
          }
        }
      ]
    },
    {
      "id": "f_008",
      "name": "切除-旋转2",
      "atomic_id": "revolve_cut",
      "depends_on": [
        "f_006",
        "f_004"
      ],
      "params": {
        "angle_deg": 360.0,
        "axis": {
          "origin_mm": [
            -13.989637029,
            -15.0,
            0.0
          ],
          "direction": [
            -1.0,
            0.0,
            0.0
          ]
        },
        "reverse": true,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_004",
      "selectors": [
        {
          "kind": "axis",
          "stable_id": "02a83775e25bc6ceb3efd31a4f387e2b8748c16ada5c6901e75ca96c77e500ff",
          "source": "solidworks",
          "confidence": 1.0,
          "geometry": {
            "start": [
              -0.013989637028918152,
              -0.015000000000000015,
              0.0
            ],
            "end": [
              -0.023,
              -0.014999999999999986,
              0.0
            ]
          }
        }
      ]
    },
    {
      "id": "f_010",
      "name": "切除-旋转3",
      "atomic_id": "revolve_cut",
      "depends_on": [
        "f_009",
        "f_004"
      ],
      "params": {
        "angle_deg": 360.0,
        "axis": {
          "origin_mm": [
            -23.0,
            15.0,
            0.0
          ],
          "direction": [
            1.0,
            0.0,
            0.0
          ]
        },
        "reverse": true,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_005",
      "selectors": [
        {
          "kind": "axis",
          "stable_id": "765507d005a1dff1a68c2378f031a196912bb365f33748a42f9f85a6603e37f9",
          "source": "solidworks",
          "confidence": 1.0,
          "geometry": {
            "start": [
              -0.023,
              0.014999999999999986,
              0.0
            ],
            "end": [
              -0.013989637028918155,
              0.015000000000000015,
              0.0
            ]
          }
        }
      ]
    },
    {
      "id": "f_011",
      "name": "切除-旋转4",
      "atomic_id": "revolve_cut",
      "depends_on": [
        "f_009",
        "f_004"
      ],
      "params": {
        "angle_deg": 360.0,
        "axis": {
          "origin_mm": [
            -13.989637029,
            -15.0,
            0.0
          ],
          "direction": [
            -1.0,
            0.0,
            0.0
          ]
        },
        "reverse": true,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_006",
      "selectors": [
        {
          "kind": "axis",
          "stable_id": "9abbcd389e9e782b6d0f9523b420598408a4c137b7fa6b5d8ca007aaba0241ed",
          "source": "solidworks",
          "confidence": 1.0,
          "geometry": {
            "start": [
              -0.013989637028918152,
              -0.015000000000000015,
              0.0
            ],
            "end": [
              -0.023,
              -0.014999999999999986,
              0.0
            ]
          }
        }
      ]
    },
    {
      "id": "f_015",
      "name": "For barrel XY",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_014"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": -1
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_016",
      "name": "For barrel XZ",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_015"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            1.0,
            0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": -1
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_017",
      "name": "For barrel YZ",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_016"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            1.0,
            0.0,
            0.0
          ],
          "x_dir": [
            0.0,
            1.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": -1
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_018",
      "name": "For barrel X",
      "atomic_id": "reference_axis",
      "depends_on": [
        "f_015",
        "f_016"
      ],
      "params": {
        "axis": {
          "selector": {
            "kind": "feature",
            "stable_id": "875069e17629f972b8bf59295fa997d152964a5f3710c7089cad2783afc48de4",
            "source": "solidworks",
            "confidence": 1.0
          }
        }
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "875069e17629f972b8bf59295fa997d152964a5f3710c7089cad2783afc48de4",
          "source": "solidworks",
          "confidence": 1.0
        },
        {
          "kind": "plane",
          "stable_id": "875069e17629f972b8bf59295fa997d152964a5f3710c7089cad2783afc48de4",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_015"
        },
        {
          "kind": "plane",
          "stable_id": "7b8b9a8884d07f1d1f5adec3f28dcd5d84328355cc8cfb78a0ac53f4b0f1b1d6",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_016"
        }
      ]
    },
    {
      "id": "f_019",
      "name": "For barrel Y",
      "atomic_id": "reference_axis",
      "depends_on": [
        "f_015",
        "f_017"
      ],
      "params": {
        "axis": {
          "selector": {
            "kind": "feature",
            "stable_id": "875069e17629f972b8bf59295fa997d152964a5f3710c7089cad2783afc48de4",
            "source": "solidworks",
            "confidence": 1.0
          }
        }
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "875069e17629f972b8bf59295fa997d152964a5f3710c7089cad2783afc48de4",
          "source": "solidworks",
          "confidence": 1.0
        },
        {
          "kind": "plane",
          "stable_id": "875069e17629f972b8bf59295fa997d152964a5f3710c7089cad2783afc48de4",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_015"
        },
        {
          "kind": "plane",
          "stable_id": "0c95283abeab1e9cdbacd895b30766f0bafc53b6d8d12e40f6bef50ad13011a9",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_017"
        }
      ]
    },
    {
      "id": "f_020",
      "name": "For barrel Z",
      "atomic_id": "reference_axis",
      "depends_on": [
        "f_017",
        "f_016"
      ],
      "params": {
        "axis": {
          "selector": {
            "kind": "feature",
            "stable_id": "0c95283abeab1e9cdbacd895b30766f0bafc53b6d8d12e40f6bef50ad13011a9",
            "source": "solidworks",
            "confidence": 1.0
          }
        }
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "0c95283abeab1e9cdbacd895b30766f0bafc53b6d8d12e40f6bef50ad13011a9",
          "source": "solidworks",
          "confidence": 1.0
        },
        {
          "kind": "plane",
          "stable_id": "0c95283abeab1e9cdbacd895b30766f0bafc53b6d8d12e40f6bef50ad13011a9",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_017"
        },
        {
          "kind": "plane",
          "stable_id": "7b8b9a8884d07f1d1f5adec3f28dcd5d84328355cc8cfb78a0ac53f4b0f1b1d6",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_016"
        }
      ]
    },
    {
      "id": "f_021",
      "name": "For piston XY",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_020"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": -1
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_022",
      "name": "For piston XZ",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_021"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            1.0,
            0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": -1
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_023",
      "name": "For piston YZ",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_022"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            1.0,
            0.0,
            0.0
          ],
          "x_dir": [
            0.0,
            1.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": -1
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_024",
      "name": "For piston X",
      "atomic_id": "reference_axis",
      "depends_on": [
        "f_021",
        "f_022"
      ],
      "params": {
        "axis": {
          "selector": {
            "kind": "feature",
            "stable_id": "3ef26d2613d133dbbf167cf8624ca848df93df628cfd44a289837c2ad34085d7",
            "source": "solidworks",
            "confidence": 1.0
          }
        }
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "3ef26d2613d133dbbf167cf8624ca848df93df628cfd44a289837c2ad34085d7",
          "source": "solidworks",
          "confidence": 1.0
        },
        {
          "kind": "plane",
          "stable_id": "3ef26d2613d133dbbf167cf8624ca848df93df628cfd44a289837c2ad34085d7",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_021"
        },
        {
          "kind": "plane",
          "stable_id": "7b3a9812cea42b535594bcf449251470d33d96239e9eb35982604f7845434a44",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_022"
        }
      ]
    },
    {
      "id": "f_025",
      "name": "For piston Y",
      "atomic_id": "reference_axis",
      "depends_on": [
        "f_021",
        "f_023"
      ],
      "params": {
        "axis": {
          "selector": {
            "kind": "feature",
            "stable_id": "3ef26d2613d133dbbf167cf8624ca848df93df628cfd44a289837c2ad34085d7",
            "source": "solidworks",
            "confidence": 1.0
          }
        }
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "3ef26d2613d133dbbf167cf8624ca848df93df628cfd44a289837c2ad34085d7",
          "source": "solidworks",
          "confidence": 1.0
        },
        {
          "kind": "plane",
          "stable_id": "3ef26d2613d133dbbf167cf8624ca848df93df628cfd44a289837c2ad34085d7",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_021"
        },
        {
          "kind": "plane",
          "stable_id": "3b72abbddb85f137de8d198bf22be786c78c5c13efb163b62eb7c6c9eb296d4a",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_023"
        }
      ]
    },
    {
      "id": "f_026",
      "name": "For piston Z",
      "atomic_id": "reference_axis",
      "depends_on": [
        "f_023",
        "f_022"
      ],
      "params": {
        "axis": {
          "selector": {
            "kind": "feature",
            "stable_id": "3b72abbddb85f137de8d198bf22be786c78c5c13efb163b62eb7c6c9eb296d4a",
            "source": "solidworks",
            "confidence": 1.0
          }
        }
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "3b72abbddb85f137de8d198bf22be786c78c5c13efb163b62eb7c6c9eb296d4a",
          "source": "solidworks",
          "confidence": 1.0
        },
        {
          "kind": "plane",
          "stable_id": "3b72abbddb85f137de8d198bf22be786c78c5c13efb163b62eb7c6c9eb296d4a",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_023"
        },
        {
          "kind": "plane",
          "stable_id": "7b3a9812cea42b535594bcf449251470d33d96239e9eb35982604f7845434a44",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_022"
        }
      ]
    }
  ],
  "meta": {
    "unit": "mm",
    "source": "126271.solidworks_evidence_v2.json",
    "source_schema": "solidworks.cad_evidence.v2",
    "source_status": "complete_with_blockers",
    "document_truth": {
      "mass_properties": {
        "available": true,
        "mass": 0.102476552403932,
        "volume": 0.000102476552403932,
        "surface_area": 0.02264007956677587,
        "center_of_mass": [
          0.03500000000000001,
          4.855652203441823e-19,
          -0.00011717498441379737
        ],
        "principal_moments": [
          4.714068153790506e-05,
          6.382116041126898e-05,
          6.391253988971073e-05
        ],
        "principal_axes": null,
        "moment_of_inertia": null
      },
      "geometry": {
        "bounding_box": [
          0.0,
          -0.023,
          -0.023,
          0.07,
          0.023,
          0.02300000000000002
        ],
        "solid_body_count": 1,
        "bodies": [
          {
            "kind": "body",
            "dotnet_type": "System.__ComObject",
            "name": "切除-旋转6",
            "persist_reference_base64": "UEYAAAQAAAD//v8AAAAAAAcAAABwAAAAbwAAAG4AAABtAAAAbAAAAGsAAABqAAAA",
            "persist_reference_sha256": "bc12271f0d98e74967ed2edf79c19143398ebcd3a67405aba0315fae954a07f3",
            "component": null,
            "geometry": {
              "box": [
                0.0,
                -0.023,
                -0.023,
                0.07,
                0.023,
                0.02300000000000002
              ],
              "face_count": 35,
              "edge_count": 42,
              "vertex_count": 12
            },
            "stable_id": "bc12271f0d98e74967ed2edf79c19143398ebcd3a67405aba0315fae954a07f3"
          }
        ]
      }
    },
    "step_inference": {
      "available": true,
      "face_count": 56,
      "surface_counts": {
        "cone": 16,
        "cylinder": 26,
        "plane": 14
      },
      "axis_count": 42,
      "repeat_spacings_mm": [
        {
          "spacing_mm": 50.0,
          "pair_count": 5
        },
        {
          "spacing_mm": 1000.0,
          "pair_count": 2
        },
        {
          "spacing_mm": 991.4801,
          "pair_count": 2
        },
        {
          "spacing_mm": 991.4436,
          "pair_count": 2
        },
        {
          "spacing_mm": 999.44,
          "pair_count": 2
        },
        {
          "spacing_mm": 1001.2492,
          "pair_count": 2
        },
        {
          "spacing_mm": 992.7401,
          "pair_count": 2
        },
        {
          "spacing_mm": 992.7036,
          "pair_count": 2
        },
        {
          "spacing_mm": 1000.6899,
          "pair_count": 2
        },
        {
          "spacing_mm": 8.5199,
          "pair_count": 2
        },
        {
          "spacing_mm": 31.3239,
          "pair_count": 2
        },
        {
          "spacing_mm": 30.017,
          "pair_count": 2
        }
      ],
      "metrics": {
        "bounding_box_mm": [
          0.0,
          -23.0,
          -23.0,
          70.0,
          23.0,
          23.0
        ],
        "volume_mm3": 102476.552403932,
        "surface_area_mm2": 22640.079566776,
        "solid_count": 1,
        "face_count": 56,
        "edge_count": 114,
        "vertex_count": 72
      },
      "error": null,
      "truth_comparison": {
        "expected_from_evidence": {
          "bounding_box_mm": [
            0.0,
            -23.0,
            -23.0,
            70.0,
            23.0,
            23.0
          ],
          "volume_mm3": 102476.552403932,
          "surface_area_mm2": 22640.079566776,
          "solid_count": 1,
          "face_count": 35,
          "edge_count": 42,
          "vertex_count": 12
        },
        "comparisons": {
          "volume_mm3": {
            "expected": 102476.552403932,
            "actual": 102476.552403932,
            "absolute_delta": 0.0,
            "within_tolerance": true
          },
          "surface_area_mm2": {
            "expected": 22640.079566776,
            "actual": 22640.079566776,
            "absolute_delta": 0.0,
            "within_tolerance": true
          },
          "bounding_box_mm": {
            "expected": [
              0.0,
              -23.0,
              -23.0,
              70.0,
              23.0,
              23.0
            ],
            "actual": [
              0.0,
              -23.0,
              -23.0,
              70.0,
              23.0,
              23.0
            ],
            "max_absolute_delta": 0.0,
            "within_tolerance": true
          },
          "solid_count": {
            "expected": 1,
            "actual": 1,
            "matches": true
          },
          "face_count": {
            "expected": 35,
            "actual": 56,
            "matches": false
          },
          "edge_count": {
            "expected": 42,
            "actual": 114,
            "matches": false
          },
          "vertex_count": {
            "expected": 12,
            "actual": 72,
            "matches": false
          }
        },
        "numeric_geometry_match": true,
        "topology_counts_match": false
      }
    },
    "source_has_modeling_features": true
  }
}