{ "schema": "cad.cdsl.llm.v1", "schema_version": "1.1.0", "kind": "part", "part_id": "_376407-MS6-MV----1", "geometry": { "sketches": [ { "id": "sk_001", "name": "原点", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [] } }, { "id": "sk_002", "name": "草图1", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "arc", "start": [ 0.0, 58.9 ], "end": [ 0.5, 59.4 ], "center": [ 0.5, 58.9 ], "radius_mm": 0.5, "clockwise": true }, { "type": "line", "start": [ 0.5, 59.4 ], "end": [ 2.0, 59.4 ] }, { "type": "arc", "start": [ 2.0, 59.4 ], "end": [ 2.5, 58.9 ], "center": [ 2.0, 58.9 ], "radius_mm": 0.5, "clockwise": true }, { "type": "line", "start": [ 2.5, 58.9 ], "end": [ 2.5, 56.4 ] }, { "type": "line", "start": [ 2.5, 56.4 ], "end": [ 4.1, 56.4 ] }, { "type": "line", "start": [ 4.1, 56.4 ], "end": [ 4.1, 61.9 ] }, { "type": "line", "start": [ 4.1, 61.9 ], "end": [ -9.0, 61.9 ] }, { "type": "line", "start": [ -9.0, 61.9 ], "end": [ -9.0, 59.4 ] }, { "type": "line", "start": [ -9.0, 59.4 ], "end": [ -6.5, 57.956624327 ] }, { "type": "line", "start": [ -6.5, 57.956624327 ], "end": [ -6.5, 0.0 ] }, { "type": "line", "start": [ -6.5, 0.0 ], "end": [ 0.0, 0.0 ] }, { "type": "line", "start": [ 0.0, 0.0 ], "end": [ 0.0, 58.9 ] } ] } ] } }, { "id": "sk_003", "name": "草图2", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -9.5, 12.990381057 ], "end": [ -9.5, -5.0 ] }, { "type": "line", "start": [ -9.5, -5.0 ], "end": [ 9.5, -5.0 ] }, { "type": "line", "start": [ 9.5, -5.0 ], "end": [ 9.5, 12.990381057 ] }, { "type": "line", "start": [ 9.5, 12.990381057 ], "end": [ 2.0, 0.0 ] }, { "type": "line", "start": [ 2.0, 0.0 ], "end": [ -2.0, 0.0 ] }, { "type": "line", "start": [ -2.0, 0.0 ], "end": [ -9.5, 12.990381057 ] } ] } ] } }, { "id": "sk_004", "name": "草图3", "role": "profile", "workplane": { "origin_mm": [ -0.0, -1000.0, -0.0 ], "x_dir": [ -1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, -1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 0.0, 9.25 ], "end": [ -15.0, 9.25 ] }, { "type": "line", "start": [ -15.0, 9.25 ], "end": [ -15.0, -9.25 ] }, { "type": "line", "start": [ -15.0, -9.25 ], "end": [ 0.0, -9.25 ] }, { "type": "line", "start": [ 0.0, -9.25 ], "end": [ -0.0, -4.25 ] }, { "type": "line", "start": [ -0.0, -4.25 ], "end": [ -10.0, -4.25 ] }, { "type": "line", "start": [ -10.0, -4.25 ], "end": [ -10.0, 4.25 ] }, { "type": "line", "start": [ -10.0, 4.25 ], "end": [ 0.0, 4.25 ] }, { "type": "line", "start": [ 0.0, 4.25 ], "end": [ 0.0, 9.25 ] } ] } ] } }, { "id": "sk_005", "name": "草图4", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -6.5, 53.0 ], "end": [ -6.5, 55.25 ] }, { "type": "line", "start": [ -6.5, 55.25 ], "end": [ -2.4, 55.25 ] }, { "type": "line", "start": [ -2.4, 55.25 ], "end": [ -2.4, 55.0 ] }, { "type": "line", "start": [ -2.4, 55.0 ], "end": [ -2.021, 54.621 ] }, { "type": "line", "start": [ -2.021, 54.621 ], "end": [ -0.379, 54.621 ] }, { "type": "line", "start": [ -0.379, 54.621 ], "end": [ 0.0, 55.0 ] }, { "type": "line", "start": [ 0.0, 55.0 ], "end": [ 0.0, 53.0 ] }, { "type": "line", "start": [ 0.0, 53.0 ], "end": [ -6.5, 53.0 ] } ] } ], "construction": [ { "type": "line", "start": [ 0.0, 53.0 ], "end": [ -6.5, 53.0 ] } ] } }, { "id": "sk_006", "name": "草图5", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -6.5, 8.8 ], "end": [ -6.5, 11.05 ] }, { "type": "line", "start": [ -6.5, 11.05 ], "end": [ -2.4, 11.05 ] }, { "type": "line", "start": [ -2.4, 11.05 ], "end": [ -2.4, 10.8 ] }, { "type": "line", "start": [ -2.4, 10.8 ], "end": [ -2.021, 10.421 ] }, { "type": "line", "start": [ -2.021, 10.421 ], "end": [ -0.379, 10.421 ] }, { "type": "line", "start": [ -0.379, 10.421 ], "end": [ 0.0, 10.8 ] }, { "type": "line", "start": [ 0.0, 10.8 ], "end": [ 0.0, 8.8 ] }, { "type": "line", "start": [ 0.0, 8.8 ], "end": [ -6.5, 8.8 ] } ] } ], "construction": [ { "type": "line", "start": [ 0.0, 8.8 ], "end": [ -6.5, 8.8 ] } ] } }, { "id": "sk_007", "name": "草图6", "role": "profile", "workplane": { "origin_mm": [ -0.0, -1000.0, -0.0 ], "x_dir": [ -1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, -1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "arc", "start": [ 2.9, 0.696930504 ], "end": [ 2.264880088, 1.69386907 ], "center": [ 1.8, 0.696930504 ], "radius_mm": 1.1, "clockwise": false }, { "type": "line", "start": [ 2.264880088, 1.69386907 ], "end": [ 0.635119912, 2.453838721 ] }, { "type": "arc", "start": [ 0.635119912, 2.453838721 ], "end": [ 0.0, 3.450777287 ], "center": [ 1.1, 3.450777287 ], "radius_mm": 1.1, "clockwise": true }, { "type": "line", "start": [ 0.0, 3.450777287 ], "end": [ 0.0, -3.450777287 ] }, { "type": "arc", "start": [ 0.0, -3.450777287 ], "end": [ 0.635119912, -2.453838721 ], "center": [ 1.1, -3.450777287 ], "radius_mm": 1.1, "clockwise": true }, { "type": "line", "start": [ 0.635119912, -2.453838721 ], "end": [ 2.264880088, -1.69386907 ] }, { "type": "arc", "start": [ 2.264880088, -1.69386907 ], "end": [ 2.9, -0.696930504 ], "center": [ 1.8, -0.696930504 ], "radius_mm": 1.1, "clockwise": false }, { "type": "line", "start": [ 2.9, -0.696930504 ], "end": [ 2.9, 0.696930504 ] } ] } ] } } ] }, "features": [ { "id": "f_001", "name": "前视基准面", "atomic_id": "reference_plane", "depends_on": [], "params": { "plane": { "origin_mm": [ 0.0, 0.0, 0.0 ], "normal": [ 0.0, 1.0, 0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": 10 }, "execution_status": "deferred" }, { "id": "f_002", "name": "上视基准面", "atomic_id": "reference_plane", "depends_on": [ "f_001" ], "params": { "plane": { "origin_mm": [ 0.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ], "x_dir": [ 1.0, 0.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": 10 }, "execution_status": "deferred" }, { "id": "f_003", "name": "右视基准面", "atomic_id": "reference_plane", "depends_on": [ "f_002" ], "params": { "plane": { "origin_mm": [ 0.0, 0.0, 0.0 ], "normal": [ 1.0, 0.0, 0.0 ], "x_dir": [ 0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": 10 }, "execution_status": "deferred" }, { "id": "f_004", "name": "基准面1", "atomic_id": "reference_plane", "depends_on": [ "f_003" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_002" }, "execution_status": "deferred" }, { "id": "f_005", "name": "凸台-拉伸1", "atomic_id": "extrude_add_two_sided", "depends_on": [ "f_004" ], "params": { "distance_mm": 5.0, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 }, "reverse_distance_mm": 5.0, "reverse_end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_002" }, { "id": "f_006", "name": "基准面2", "atomic_id": "reference_plane", "depends_on": [ "f_005" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_003" }, "execution_status": "deferred" }, { "id": "f_007", "name": "切除-拉伸1", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_006", "f_005" ], "params": { "distance_mm": 1.25, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 }, "reverse_distance_mm": 1.25, "reverse_end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_003" }, { "id": "f_008", "name": "基准面3", "atomic_id": "reference_plane", "depends_on": [ "f_007" ], "params": { "plane": { "origin_mm": [ -0.0, -1000.0, -0.0 ], "x_dir": [ -1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, -1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_004" }, "execution_status": "deferred" }, { "id": "f_009", "name": "切除-拉伸2", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_008", "f_005" ], "params": { "distance_mm": 10.0, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 }, "reverse_distance_mm": 10.0, "reverse_end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_004" }, { "id": "f_010", "name": "基准面4", "atomic_id": "reference_plane", "depends_on": [ "f_009" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_005" }, "execution_status": "deferred" }, { "id": "f_011", "name": "切除-旋转1", "atomic_id": "revolve_cut", "depends_on": [ "f_010", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ 0.0, 53.0, 0.0 ], "direction": [ -1.0, 0.0, 0.0 ] }, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_005", "selectors": [ { "kind": "axis", "stable_id": "cafe98096c624b6796de61bec8e1fcce108e56b0da6248b8b4833851857bf4e2", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ 0.0, 0.053, 0.0 ], "end": [ -0.0065, 0.053, 0.0 ] } } ] }, { "id": "f_012", "name": "基准面5", "atomic_id": "reference_plane", "depends_on": [ "f_011" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_006" }, "execution_status": "deferred" }, { "id": "f_013", "name": "切除-旋转2", "atomic_id": "revolve_cut", "depends_on": [ "f_012", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ 0.0, 8.8, 0.0 ], "direction": [ -1.0, 0.0, 0.0 ] }, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_006", "selectors": [ { "kind": "axis", "stable_id": "1a7b9864fa4410674dc0a8dab86b0f101f6c655580a3c036a9649ecd2a83945f", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ 0.0, 0.0088, 0.0 ], "end": [ -0.0065, 0.0088, 0.0 ] } } ] }, { "id": "f_014", "name": "基准面6", "atomic_id": "reference_plane", "depends_on": [ "f_013" ], "params": { "plane": { "origin_mm": [ -0.0, -1000.0, -0.0 ], "x_dir": [ -1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, -1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_007" }, "execution_status": "deferred" }, { "id": "f_015", "name": "切除-拉伸3", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_014", "f_005" ], "params": { "distance_mm": 18.0, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 }, "reverse_distance_mm": 18.0, "reverse_end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_007" } ], "meta": { "unit": "mm", "source": "04_支承与导向件/0405_平板底板/040599_通用平板/标准_376407 MS6-MV---(1).solidworks_evidence_v2.json", "source_schema": "solidworks.cad_evidence.v2", "source_status": "hybrid_semantic_surfaceir_pending", "document_truth": { "mass_properties": { "available": true, "mass": 0.028163399016308804, "volume": 3.587694142204943e-06, "surface_area": 0.002654252826231311, "center_of_mass": [ -0.00336614557387693, 0.032962770559339535, 3.409742084701849e-19 ], "principal_moments": [ 3.985936518157804e-07, 1.0199766826153016e-05, 1.0325739534034583e-05 ], "principal_axes": null, "moment_of_inertia": null }, "geometry": { "bounding_box": [ -0.009, 0.0, -0.005, 0.004100000000000001, 0.0619, 0.005000000000000003 ], "solid_body_count": 1, "bodies": [ { "kind": "body", "dotnet_type": "System.__ComObject", "name": "切除-拉伸3", "persist_reference_base64": "UEYAAAQAAAD//v8AAAAAAAYAAABwAAAAbwAAAG4AAABtAAAAbAAAAGsAAAA=", "persist_reference_sha256": "7b8fcafc1c7d0ba1769cb2f419f135882811484b475dfcd273f166bc1e4bf4ed", "component": null, "geometry": { "box": [ -0.009, 0.0, -0.005, 0.0041, 0.0619, 0.005000000000000003 ], "face_count": 41, "edge_count": 96, "vertex_count": 56 }, "stable_id": "7b8fcafc1c7d0ba1769cb2f419f135882811484b475dfcd273f166bc1e4bf4ed" } ] } }, "step_inference": { "available": true, "face_count": 49, "surface_counts": { "cone": 8, "cylinder": 14, "plane": 27 }, "axis_count": 22, "repeat_spacings_mm": [ { "spacing_mm": 2.021, "pair_count": 2 }, { "spacing_mm": 44.2, "pair_count": 2 }, { "spacing_mm": 44.2462, "pair_count": 2 }, { "spacing_mm": 40.1964, "pair_count": 2 }, { "spacing_mm": 40.313, "pair_count": 2 }, { "spacing_mm": 40.1567, "pair_count": 2 }, { "spacing_mm": 40.3085, "pair_count": 2 }, { "spacing_mm": 4.4864, "pair_count": 2 }, { "spacing_mm": 5.4333, "pair_count": 2 }, { "spacing_mm": 4.1155, "pair_count": 2 }, { "spacing_mm": 5.3999, "pair_count": 2 }, { "spacing_mm": 4.2064, "pair_count": 2 } ], "metrics": { "bounding_box_mm": [ -9.0, -0.0, -5.0, 4.1, 61.9, 5.0 ], "volume_mm3": 3587.694142205, "surface_area_mm2": 2654.252826231, "solid_count": 1, "face_count": 49, "edge_count": 124, "vertex_count": 80 }, "error": null, "truth_comparison": { "expected_from_evidence": { "bounding_box_mm": [ -9.0, 0.0, -5.0, 4.1, 61.9, 5.0 ], "volume_mm3": 3587.694142205, "surface_area_mm2": 2654.252826231, "solid_count": 1, "face_count": 41, "edge_count": 96, "vertex_count": 56 }, "comparisons": { "volume_mm3": { "expected": 3587.694142205, "actual": 3587.694142205, "absolute_delta": 0.0, "within_tolerance": true }, "surface_area_mm2": { "expected": 2654.252826231, "actual": 2654.252826231, "absolute_delta": 0.0, "within_tolerance": true }, "bounding_box_mm": { "expected": [ -9.0, 0.0, -5.0, 4.1, 61.9, 5.0 ], "actual": [ -9.0, -0.0, -5.0, 4.1, 61.9, 5.0 ], "max_absolute_delta": 0.0, "within_tolerance": true }, "solid_count": { "expected": 1, "actual": 1, "matches": true }, "face_count": { "expected": 41, "actual": 49, "matches": false }, "edge_count": { "expected": 96, "actual": 124, "matches": false }, "vertex_count": { "expected": 56, "actual": 80, "matches": false } }, "numeric_geometry_match": true, "topology_counts_match": false } }, "source_has_modeling_features": true } }