{
  "schema": "cad.cdsl.llm.v1",
  "schema_version": "1.1.0",
  "kind": "part",
  "part_id": "113246",
  "geometry": {
    "sketches": [
      {
        "id": "sk_001",
        "name": "原点",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": []
        }
      },
      {
        "id": "sk_002",
        "name": "草图15",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    -70.0,
                    -3.0
                  ],
                  "end": [
                    -70.0,
                    -20.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -70.0,
                    -20.0
                  ],
                  "end": [
                    0.0,
                    -20.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    0.0,
                    -20.0
                  ],
                  "end": [
                    0.0,
                    20.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    0.0,
                    20.0
                  ],
                  "end": [
                    -70.0,
                    20.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -70.0,
                    20.0
                  ],
                  "end": [
                    -70.0,
                    3.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -70.0,
                    3.0
                  ],
                  "end": [
                    -40.0,
                    3.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -40.0,
                    3.0
                  ],
                  "end": [
                    -40.0,
                    -3.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -40.0,
                    -3.0
                  ],
                  "end": [
                    -70.0,
                    -3.0
                  ]
                }
              ]
            }
          ],
          "construction": [
            {
              "type": "line",
              "start": [
                -40.0,
                0.0
              ],
              "end": [
                0.0,
                0.0
              ]
            }
          ]
        }
      },
      {
        "id": "sk_003",
        "name": "草图16",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            15.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    0.0,
                    17.0
                  ],
                  "end": [
                    -70.0,
                    17.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -70.0,
                    17.0
                  ],
                  "end": [
                    -70.0,
                    -17.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -70.0,
                    -17.0
                  ],
                  "end": [
                    0.0,
                    -17.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    0.0,
                    -17.0
                  ],
                  "end": [
                    0.0,
                    17.0
                  ]
                }
              ]
            }
          ]
        }
      },
      {
        "id": "sk_004",
        "name": "草图19",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            1000.0,
            0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            -0.0
          ],
          "y_dir": [
            0.0,
            1.0,
            0.0
          ],
          "normal": [
            0.0,
            -0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    0.0,
                    0.0
                  ],
                  "end": [
                    -70.0,
                    0.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -70.0,
                    0.0
                  ],
                  "end": [
                    -70.0,
                    -15.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -70.0,
                    -15.0
                  ],
                  "end": [
                    0.0,
                    -15.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    0.0,
                    -15.0
                  ],
                  "end": [
                    0.0,
                    0.0
                  ]
                }
              ]
            }
          ]
        }
      },
      {
        "id": "sk_005",
        "name": "草图33",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            1000.0,
            0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            -0.0
          ],
          "y_dir": [
            0.0,
            1.0,
            0.0
          ],
          "normal": [
            0.0,
            -0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    -35.0,
                    0.0
                  ],
                  "end": [
                    -5.0,
                    0.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -5.0,
                    0.0
                  ],
                  "end": [
                    -5.0,
                    -15.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -5.0,
                    -15.0
                  ],
                  "end": [
                    -35.0,
                    -15.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -35.0,
                    -15.0
                  ],
                  "end": [
                    -35.0,
                    0.0
                  ]
                }
              ]
            }
          ]
        }
      },
      {
        "id": "sk_006",
        "name": "草图34",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            -1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    70.0,
                    -3.0
                  ],
                  "end": [
                    60.0,
                    -3.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    60.0,
                    -3.0
                  ],
                  "end": [
                    60.0,
                    -13.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    60.0,
                    -13.0
                  ],
                  "end": [
                    70.0,
                    -13.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    70.0,
                    -13.0
                  ],
                  "end": [
                    70.0,
                    -3.0
                  ]
                }
              ]
            }
          ]
        }
      }
    ]
  },
  "features": [
    {
      "id": "f_001",
      "name": "前视基准面",
      "atomic_id": "reference_plane",
      "depends_on": [],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            1.0,
            0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 10
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_002",
      "name": "上视基准面",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_001"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 10
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_004",
      "name": "凸台-拉伸1",
      "atomic_id": "extrude_add_blind",
      "depends_on": [
        "f_001"
      ],
      "params": {
        "distance_mm": 15.0,
        "reverse": false,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_002"
    },
    {
      "id": "f_003",
      "name": "右视基准面",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_002"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            1.0,
            0.0,
            0.0
          ],
          "x_dir": [
            0.0,
            1.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 10
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_005",
      "name": "切除-拉伸1",
      "atomic_id": "extrude_cut_blind",
      "depends_on": [
        "f_004"
      ],
      "params": {
        "distance_mm": 2.0,
        "reverse": false,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_003"
    },
    {
      "id": "f_007",
      "name": "凸台-拉伸2",
      "atomic_id": "extrude_add_blind",
      "depends_on": [
        "f_004"
      ],
      "params": {
        "distance_mm": 12.0,
        "reverse": false,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_004"
    },
    {
      "id": "f_009",
      "name": "大小mm 暗销孔1",
      "atomic_id": "hole_wizard",
      "depends_on": [
        "f_004"
      ],
      "params": {
        "hole_type": "暗销孔",
        "diameter_mm": 2.0,
        "depth_mm": 15.0,
        "end_condition": {
          "solidworks_code": 1,
          "type": "through_all"
        },
        "positions": [
          {
            "mm": [
              40.0,
              3.0,
              0.0
            ]
          },
          {
            "mm": [
              40.0,
              -3.0,
              0.0
            ]
          }
        ]
      },
      "execution_status": "deferred",
      "unresolved": [
        "hole has no captured semantic selections"
      ]
    },
    {
      "id": "f_010",
      "name": "M6 间隙孔1",
      "atomic_id": "hole_wizard",
      "depends_on": [
        "f_004"
      ],
      "params": {
        "hole_type": "螺钉间隙",
        "diameter_mm": 6.6,
        "depth_mm": 17.0,
        "end_condition": {
          "solidworks_code": 2,
          "type": "through_all_both"
        },
        "positions": [
          {
            "mm": [
              65.0,
              -7.5,
              0.0
            ]
          },
          {
            "mm": [
              45.0,
              -7.5,
              0.0
            ]
          }
        ]
      },
      "execution_status": "deferred",
      "unresolved": [
        "hole has no captured semantic selections"
      ]
    },
    {
      "id": "f_012",
      "name": "M3 螺纹孔1",
      "atomic_id": "hole_wizard",
      "depends_on": [
        "f_004"
      ],
      "params": {
        "hole_type": "底部螺纹孔",
        "diameter_mm": 3.0,
        "depth_mm": 13.0,
        "end_condition": {
          "solidworks_code": 1,
          "type": "through_all"
        },
        "positions": [
          {
            "mm": [
              20.0,
              -5.0,
              0.0
            ]
          },
          {
            "mm": [
              20.0,
              -15.0,
              0.0
            ]
          }
        ],
        "thread": {
          "diameter_mm": 3.0,
          "depth_mm": 13.0,
          "class": "1B"
        }
      },
      "execution_status": "deferred",
      "unresolved": [
        "hole has no captured semantic selections"
      ]
    },
    {
      "id": "f_014",
      "name": "切除-拉伸3",
      "atomic_id": "extrude_cut_blind",
      "depends_on": [
        "f_004"
      ],
      "params": {
        "distance_mm": 0.0,
        "reverse": false,
        "end_condition": {
          "type": "through_all",
          "solidworks_code": 1
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_006"
    },
    {
      "id": "f_006",
      "name": "M4 间隙孔2",
      "atomic_id": "hole_wizard",
      "depends_on": [
        "f_005"
      ],
      "params": {
        "hole_type": "螺钉间隙",
        "diameter_mm": 4.5,
        "depth_mm": 13.0,
        "end_condition": {
          "solidworks_code": 1,
          "type": "through_all"
        },
        "positions": [
          {
            "mm": [
              -7.0,
              13.0,
              0.0
            ]
          },
          {
            "mm": [
              -33.0,
              -13.0,
              0.0
            ]
          },
          {
            "mm": [
              -7.0,
              -13.0,
              0.0
            ]
          },
          {
            "mm": [
              -33.0,
              13.0,
              0.0
            ]
          }
        ],
        "host_face": {
          "kind": "face",
          "stable_id": "step-face-ce10f5589b4bde17b2ea7549",
          "source": "inferred_from_step",
          "confidence": 0.8,
          "geometry": {
            "bbox_mm": [
              -70.0,
              -20.0,
              -0.0,
              0.0,
              32.0,
              0.0
            ],
            "center_mm": [
              -33.56561596,
              6.480176324,
              0.0
            ],
            "normal": [
              0.0,
              0.0,
              -1.0
            ],
            "surface_type": "plane"
          }
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_001",
      "selectors": [
        {
          "kind": "face",
          "stable_id": "step-face-ce10f5589b4bde17b2ea7549",
          "source": "inferred_from_step",
          "confidence": 0.8,
          "geometry": {
            "bbox_mm": [
              -70.0,
              -20.0,
              -0.0,
              0.0,
              32.0,
              0.0
            ],
            "center_mm": [
              -33.56561596,
              6.480176324,
              0.0
            ],
            "normal": [
              0.0,
              0.0,
              -1.0
            ],
            "surface_type": "plane"
          }
        }
      ]
    },
    {
      "id": "f_008",
      "name": "M6 螺纹孔1",
      "atomic_id": "hole_wizard",
      "depends_on": [
        "f_007"
      ],
      "params": {
        "hole_type": "底部螺纹孔",
        "diameter_mm": 6.0,
        "depth_mm": 12.0,
        "end_condition": {
          "solidworks_code": 0,
          "type": "blind"
        },
        "positions": [
          {
            "mm": [
              -28.0,
              -7.5,
              0.0
            ]
          },
          {
            "mm": [
              -12.0,
              -7.5,
              0.0
            ]
          }
        ],
        "thread": {
          "diameter_mm": 6.0,
          "depth_mm": 12.0,
          "class": "1B"
        },
        "host_face": {
          "kind": "face",
          "stable_id": "step-face-ce10f5589b4bde17b2ea7549",
          "source": "inferred_from_step",
          "confidence": 0.8,
          "geometry": {
            "bbox_mm": [
              -70.0,
              -20.0,
              -0.0,
              0.0,
              32.0,
              0.0
            ],
            "center_mm": [
              -33.56561596,
              6.480176324,
              0.0
            ],
            "normal": [
              0.0,
              0.0,
              -1.0
            ],
            "surface_type": "plane"
          }
        }
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "face",
          "stable_id": "step-face-ce10f5589b4bde17b2ea7549",
          "source": "inferred_from_step",
          "confidence": 0.8,
          "geometry": {
            "bbox_mm": [
              -70.0,
              -20.0,
              -0.0,
              0.0,
              32.0,
              0.0
            ],
            "center_mm": [
              -33.56561596,
              6.480176324,
              0.0
            ],
            "normal": [
              0.0,
              0.0,
              -1.0
            ],
            "surface_type": "plane"
          }
        }
      ]
    },
    {
      "id": "f_011",
      "name": "M6 螺纹孔2",
      "atomic_id": "hole_wizard",
      "depends_on": [
        "f_004",
        "f_010"
      ],
      "params": {
        "hole_type": "底部螺纹孔",
        "diameter_mm": 6.0,
        "depth_mm": 29.0,
        "end_condition": {
          "solidworks_code": 1,
          "type": "through_all"
        },
        "positions": [
          {
            "mm": [
              65.0,
              -7.5,
              0.0
            ]
          },
          {
            "mm": [
              45.0,
              -7.5,
              0.0
            ]
          }
        ],
        "thread": {
          "diameter_mm": 6.0,
          "depth_mm": 29.0,
          "class": ""
        }
      },
      "execution_status": "deferred",
      "unresolved": [
        "hole has no captured semantic selections"
      ]
    },
    {
      "id": "f_013",
      "name": "切除-拉伸2",
      "atomic_id": "extrude_cut_blind",
      "depends_on": [
        "f_007",
        "f_004"
      ],
      "params": {
        "distance_mm": 2.0,
        "reverse": false,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_005"
    }
  ],
  "meta": {
    "unit": "mm",
    "source": "113246.solidworks_evidence_v2.json",
    "source_schema": "solidworks.cad_evidence.v2",
    "source_status": "complete_with_blockers",
    "document_truth": {
      "mass_properties": {
        "available": true,
        "mass": 0.3280829122365154,
        "volume": 4.179400155879177e-05,
        "surface_area": 0.013705817359110159,
        "center_of_mass": [
          -0.03293983897235519,
          0.006933120823392568,
          0.006871103830805206
        ],
        "principal_moments": [
          8.058246565768442e-05,
          0.00013507809034853007,
          0.00020452317543155865
        ],
        "principal_axes": null,
        "moment_of_inertia": null
      },
      "geometry": {
        "bounding_box": [
          -0.07,
          -0.020000000000000004,
          -1.734723475976807e-18,
          6.938893903907228e-18,
          0.032,
          0.015
        ],
        "solid_body_count": 1,
        "bodies": [
          {
            "kind": "body",
            "dotnet_type": "System.__ComObject",
            "name": "切除-拉伸3",
            "persist_reference_base64": "UEYAAAQAAAD//v8AAAAAAAsAAAB6AAAAeQAAAHgAAAB2AAAAdQAAAHQAAABzAAAAcgAAAHEAAABwAAAAbwAAAA==",
            "persist_reference_sha256": "a4fd3d10b03a6b1494a942ae0f7b1e708033a161d6aa16c39581c8c26e87cf42",
            "component": null,
            "geometry": {
              "box": [
                -0.07,
                -0.020000000000000004,
                -1.402220585023717e-18,
                5.206200773004023e-18,
                0.032,
                0.015
              ],
              "face_count": 36,
              "edge_count": 84,
              "vertex_count": 42
            },
            "stable_id": "a4fd3d10b03a6b1494a942ae0f7b1e708033a161d6aa16c39581c8c26e87cf42"
          }
        ]
      }
    },
    "step_inference": {
      "available": true,
      "face_count": 50,
      "surface_counts": {
        "cone": 4,
        "cylinder": 26,
        "plane": 20
      },
      "axis_count": 30,
      "repeat_spacings_mm": [
        {
          "spacing_mm": 26.0,
          "pair_count": 4
        },
        {
          "spacing_mm": 15.0,
          "pair_count": 2
        },
        {
          "spacing_mm": 16.0,
          "pair_count": 2
        },
        {
          "spacing_mm": 21.9317,
          "pair_count": 2
        },
        {
          "spacing_mm": 38.5908,
          "pair_count": 2
        },
        {
          "spacing_mm": 48.2623,
          "pair_count": 2
        },
        {
          "spacing_mm": 28.8487,
          "pair_count": 2
        },
        {
          "spacing_mm": 45.6098,
          "pair_count": 2
        },
        {
          "spacing_mm": 49.9625,
          "pair_count": 2
        },
        {
          "spacing_mm": 20.4022,
          "pair_count": 2
        },
        {
          "spacing_mm": 24.5815,
          "pair_count": 2
        },
        {
          "spacing_mm": 33.8268,
          "pair_count": 2
        }
      ],
      "metrics": {
        "bounding_box_mm": [
          -70.0,
          -20.0,
          -0.0,
          0.0,
          32.0,
          15.0
        ],
        "volume_mm3": 41794.001558792,
        "surface_area_mm2": 13705.81735911,
        "solid_count": 1,
        "face_count": 50,
        "edge_count": 136,
        "vertex_count": 90
      },
      "error": null,
      "truth_comparison": {
        "expected_from_evidence": {
          "bounding_box_mm": [
            -70.0,
            -20.0,
            -0.0,
            0.0,
            32.0,
            15.0
          ],
          "volume_mm3": 41794.001558792,
          "surface_area_mm2": 13705.81735911,
          "solid_count": 1,
          "face_count": 36,
          "edge_count": 84,
          "vertex_count": 42
        },
        "comparisons": {
          "volume_mm3": {
            "expected": 41794.001558792,
            "actual": 41794.001558792,
            "absolute_delta": 0.0,
            "within_tolerance": true
          },
          "surface_area_mm2": {
            "expected": 13705.81735911,
            "actual": 13705.81735911,
            "absolute_delta": 0.0,
            "within_tolerance": true
          },
          "bounding_box_mm": {
            "expected": [
              -70.0,
              -20.0,
              -0.0,
              0.0,
              32.0,
              15.0
            ],
            "actual": [
              -70.0,
              -20.0,
              -0.0,
              0.0,
              32.0,
              15.0
            ],
            "max_absolute_delta": 0.0,
            "within_tolerance": true
          },
          "solid_count": {
            "expected": 1,
            "actual": 1,
            "matches": true
          },
          "face_count": {
            "expected": 36,
            "actual": 50,
            "matches": false
          },
          "edge_count": {
            "expected": 84,
            "actual": 136,
            "matches": false
          },
          "vertex_count": {
            "expected": 42,
            "actual": 90,
            "matches": false
          }
        },
        "numeric_geometry_match": true,
        "topology_counts_match": false
      }
    },
    "source_has_modeling_features": true
  }
}