{
  "schema": "cad.cdsl.llm.v1",
  "schema_version": "1.1.0",
  "kind": "part",
  "part_id": "_User-Library-Bearing-Tapped-Pillow-Block_",
  "geometry": {
    "sketches": [
      {
        "id": "sk_001",
        "name": "Origin",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": []
        }
      },
      {
        "id": "sk_002",
        "name": "Sketch1",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "arc",
                  "start": [
                    -34.666328586,
                    4.242792404
                  ],
                  "end": [
                    34.666328586,
                    4.242792404
                  ],
                  "center": [
                    0.0,
                    0.0
                  ],
                  "radius_mm": 34.925,
                  "clockwise": true
                },
                {
                  "type": "line",
                  "start": [
                    34.666328586,
                    4.242792404
                  ],
                  "end": [
                    38.1,
                    -23.8125
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    38.1,
                    -23.8125
                  ],
                  "end": [
                    38.1,
                    -36.5125
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    38.1,
                    -36.5125
                  ],
                  "end": [
                    -38.1,
                    -36.5125
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -38.1,
                    -36.5125
                  ],
                  "end": [
                    -38.1,
                    -23.8125
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -38.1,
                    -23.8125
                  ],
                  "end": [
                    -34.666328586,
                    4.242792404
                  ]
                }
              ]
            }
          ],
          "construction": [
            {
              "type": "line",
              "start": [
                0.0,
                -45.525709933
              ],
              "end": [
                0.0,
                40.738126155
              ]
            }
          ]
        }
      },
      {
        "id": "sk_003",
        "name": "Sketch10",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            0.0,
            0.0,
            1.0
          ],
          "y_dir": [
            0.707106781,
            0.0,
            -0.707106781
          ],
          "normal": [
            -0.0,
            1.0,
            0.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    -19.05,
                    -36.5125
                  ],
                  "end": [
                    -11.8364,
                    34.925
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -11.8364,
                    34.925
                  ],
                  "end": [
                    -19.05,
                    34.925
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -19.05,
                    34.925
                  ],
                  "end": [
                    -19.05,
                    -36.5125
                  ]
                }
              ]
            },
            {
              "role": "inner",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    19.05,
                    -36.5125
                  ],
                  "end": [
                    11.8364,
                    34.925
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    11.8364,
                    34.925
                  ],
                  "end": [
                    19.05,
                    34.925
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    19.05,
                    34.925
                  ],
                  "end": [
                    19.05,
                    -36.5125
                  ]
                }
              ]
            }
          ]
        }
      },
      {
        "id": "sk_004",
        "name": "Sketch9",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            1000.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            0.0,
            1.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "arc",
                  "start": [
                    -20.32,
                    8.001
                  ],
                  "end": [
                    -20.32,
                    -8.001
                  ],
                  "center": [
                    -11.844884249,
                    0.0
                  ],
                  "radius_mm": 11.655195751,
                  "clockwise": false
                },
                {
                  "type": "line",
                  "start": [
                    -20.32,
                    -8.001
                  ],
                  "end": [
                    -20.32,
                    -19.05
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -20.32,
                    -19.05
                  ],
                  "end": [
                    0.0,
                    -19.05
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    0.0,
                    -19.05
                  ],
                  "end": [
                    0.0,
                    19.05
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    0.0,
                    19.05
                  ],
                  "end": [
                    -20.32,
                    19.05
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -20.32,
                    19.05
                  ],
                  "end": [
                    -20.32,
                    8.001
                  ]
                }
              ]
            }
          ],
          "construction": [
            {
              "type": "line",
              "start": [
                0.0,
                4.917714966
              ],
              "end": [
                0.0,
                27.867051475
              ]
            }
          ]
        }
      },
      {
        "id": "sk_005",
        "name": "Sketch11",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            8.001,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "circle",
          "center": [
            0.0,
            0.0
          ],
          "radius_mm": 25.4
        }
      },
      {
        "id": "sk_006",
        "name": "Sketch12",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -8.001,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "circle",
          "center": [
            0.0,
            0.0
          ],
          "radius_mm": 25.4
        }
      },
      {
        "id": "sk_007",
        "name": "Sketch5",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            0.0,
            0.0,
            1.0
          ],
          "y_dir": [
            0.707106781,
            0.0,
            -0.707106781
          ],
          "normal": [
            -0.0,
            1.0,
            0.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "arc",
                  "start": [
                    8.001,
                    20.32
                  ],
                  "end": [
                    -8.001,
                    20.32
                  ],
                  "center": [
                    0.0,
                    11.844884249
                  ],
                  "radius_mm": 11.655195751,
                  "clockwise": false
                },
                {
                  "type": "line",
                  "start": [
                    -8.001,
                    20.32
                  ],
                  "end": [
                    -8.001,
                    19.05
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -8.001,
                    19.05
                  ],
                  "end": [
                    -13.50645,
                    19.05
                  ]
                },
                {
                  "type": "arc",
                  "start": [
                    -13.50645,
                    19.05
                  ],
                  "end": [
                    -14.3002,
                    18.25625
                  ],
                  "center": [
                    -13.50645,
                    18.25625
                  ],
                  "radius_mm": 0.79375,
                  "clockwise": true
                },
                {
                  "type": "line",
                  "start": [
                    -14.3002,
                    18.25625
                  ],
                  "end": [
                    -14.3002,
                    13.49375
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -14.3002,
                    13.49375
                  ],
                  "end": [
                    -13.50645,
                    12.7
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -13.50645,
                    12.7
                  ],
                  "end": [
                    18.90649,
                    12.7
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    18.90649,
                    12.7
                  ],
                  "end": [
                    19.70024,
                    13.49375
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    19.70024,
                    13.49375
                  ],
                  "end": [
                    19.70024,
                    18.25625
                  ]
                },
                {
                  "type": "arc",
                  "start": [
                    19.70024,
                    18.25625
                  ],
                  "end": [
                    18.90649,
                    19.05
                  ],
                  "center": [
                    18.90649,
                    18.25625
                  ],
                  "radius_mm": 0.79375,
                  "clockwise": true
                },
                {
                  "type": "line",
                  "start": [
                    18.90649,
                    19.05
                  ],
                  "end": [
                    8.001,
                    19.05
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    8.001,
                    19.05
                  ],
                  "end": [
                    8.001,
                    20.32
                  ]
                }
              ]
            }
          ],
          "construction": [
            {
              "type": "line",
              "start": [
                0.0,
                0.0
              ],
              "end": [
                39.261203047,
                0.0
              ]
            }
          ]
        }
      }
    ]
  },
  "features": [
    {
      "id": "f_001",
      "name": "Front",
      "atomic_id": "reference_plane",
      "depends_on": [],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            1.0,
            0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 10
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_002",
      "name": "Top",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_001"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 10
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_004",
      "name": "Base-Extrude",
      "atomic_id": "extrude_add_blind",
      "depends_on": [
        "f_001"
      ],
      "params": {
        "distance_mm": 38.1,
        "reverse": false,
        "end_condition": {
          "type": "through_all_and_blind",
          "solidworks_code": 6
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_002"
    },
    {
      "id": "f_007",
      "name": "Plane1",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_001"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            8.001,
            0.0
          ],
          "normal": [
            0.0,
            1.0,
            0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 8.001,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 5,
        "references": [
          {
            "kind": "plane",
            "stable_id": "75d0fc5445daf46ab7c00939122d768baf26a0763df74506c70d0d85d4e8b025",
            "source": "solidworks",
            "confidence": 1.0,
            "owner_feature_id": "f_001"
          }
        ]
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "plane",
          "stable_id": "75d0fc5445daf46ab7c00939122d768baf26a0763df74506c70d0d85d4e8b025",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_001"
        }
      ]
    },
    {
      "id": "f_009",
      "name": "Plane2",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_001"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            -0.0,
            -8.001,
            -0.0
          ],
          "normal": [
            0.0,
            1.0,
            0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 8.001,
        "angle_rad": 0.0,
        "reverse": true,
        "solidworks_type": 5,
        "references": [
          {
            "kind": "plane",
            "stable_id": "75d0fc5445daf46ab7c00939122d768baf26a0763df74506c70d0d85d4e8b025",
            "source": "solidworks",
            "confidence": 1.0,
            "owner_feature_id": "f_001"
          }
        ]
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "plane",
          "stable_id": "75d0fc5445daf46ab7c00939122d768baf26a0763df74506c70d0d85d4e8b025",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_001"
        }
      ]
    },
    {
      "id": "f_003",
      "name": "Right",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_002"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            1.0,
            0.0,
            0.0
          ],
          "x_dir": [
            0.0,
            1.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 10
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_006",
      "name": "Cut-Revolve1",
      "atomic_id": "revolve_cut",
      "depends_on": [
        "f_002",
        "f_004"
      ],
      "params": {
        "angle_deg": 360.0,
        "axis": {
          "origin_mm": [
            0.0,
            4.917714966,
            0.0
          ],
          "direction": [
            0.0,
            1.0,
            0.0
          ]
        },
        "reverse": false,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_004",
      "selectors": [
        {
          "kind": "axis",
          "stable_id": "06bcbb53ab1820ca4a8872dfb67b4a43b855a5ad71f71acee1827baf43a755fc",
          "source": "solidworks",
          "confidence": 1.0,
          "geometry": {
            "start": [
              0.0,
              0.004917714966170496,
              0.0
            ],
            "end": [
              0.0,
              0.027867051474966154,
              0.0
            ]
          }
        }
      ]
    },
    {
      "id": "f_008",
      "name": "Cut-Extrude5",
      "atomic_id": "extrude_cut_blind",
      "depends_on": [
        "f_007",
        "f_004"
      ],
      "params": {
        "distance_mm": 25.4,
        "reverse": true,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "supported",
      "sketch_id": "sk_005"
    },
    {
      "id": "f_013",
      "name": "3/8-16 Tapped Hole1",
      "atomic_id": "hole_wizard",
      "depends_on": [
        "f_004"
      ],
      "params": {
        "hole_type": "Tapped hole",
        "diameter_mm": 9.525,
        "depth_mm": 15.875,
        "end_condition": {
          "solidworks_code": 0,
          "type": "blind"
        },
        "positions": [
          {
            "mm": [
              -25.4,
              0.0,
              0.0
            ]
          },
          {
            "mm": [
              25.4,
              0.0,
              0.0
            ]
          }
        ],
        "thread": {
          "diameter_mm": 9.525,
          "depth_mm": 15.875,
          "class": ""
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_001"
    },
    {
      "id": "f_005",
      "name": "Cut-Extrude4",
      "atomic_id": "extrude_cut_blind",
      "depends_on": [
        "f_003",
        "f_004"
      ],
      "params": {
        "distance_mm": 0.0,
        "reverse": false,
        "end_condition": {
          "type": "through_all",
          "solidworks_code": 1
        },
        "reverse_distance_mm": 0.0,
        "reverse_end_condition": {
          "type": "through_all",
          "solidworks_code": 1
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_003"
    },
    {
      "id": "f_010",
      "name": "Cut-Extrude6",
      "atomic_id": "extrude_cut_blind",
      "depends_on": [
        "f_009",
        "f_004",
        "f_008"
      ],
      "params": {
        "distance_mm": 25.4,
        "reverse": false,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "supported",
      "sketch_id": "sk_006"
    },
    {
      "id": "f_011",
      "name": "Chamfer1",
      "atomic_id": "chamfer",
      "depends_on": [
        "f_005",
        "f_010",
        "f_008"
      ],
      "params": {
        "distance_mm": 3.048,
        "angle_rad": 0.78539816339745
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_012",
      "name": "Boss-Revolve1",
      "atomic_id": "revolve_add",
      "depends_on": [
        "f_003",
        "f_004",
        "f_008",
        "f_010",
        "f_006"
      ],
      "params": {
        "angle_deg": 360.0,
        "axis": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "direction": [
            1.0,
            0.0,
            0.0
          ]
        },
        "reverse": false,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_007",
      "selectors": [
        {
          "kind": "axis",
          "stable_id": "c6ac5cbad29b13388e70f233f32dcf179a6609339993a093395506c009dd998b",
          "source": "solidworks",
          "confidence": 1.0,
          "geometry": {
            "start": [
              0.0,
              0.0,
              0.0
            ],
            "end": [
              0.03926120304725288,
              0.0,
              0.0
            ]
          }
        }
      ]
    }
  ],
  "meta": {
    "unit": "mm",
    "source": "02_传动件/0203_轴承/020399_通用轴承/标准_User Library-Bearing Tapped Pillow Block_.solidworks_evidence_v2.json",
    "source_schema": "solidworks.cad_evidence.v2",
    "source_status": "hybrid_semantic_surfaceir_pending",
    "document_truth": {
      "mass_properties": {
        "available": true,
        "mass": 0.8307881752550096,
        "volume": 0.00011543891742959188,
        "surface_area": 0.024204829542200983,
        "center_of_mass": [
          -5.844492407152119e-09,
          -0.007957370357727171,
          -0.0005002126164171568
        ],
        "principal_moments": [
          0.0004054560045955432,
          0.0004582385659874511,
          0.0007218536545015253
        ],
        "principal_axes": null,
        "moment_of_inertia": null
      },
      "geometry": {
        "bounding_box": [
          -0.0381,
          -0.036512499999999996,
          -0.019700239999999994,
          0.0381,
          0.03492500000000002,
          0.01905
        ],
        "solid_body_count": 1,
        "bodies": [
          {
            "kind": "body",
            "dotnet_type": "System.__ComObject",
            "name": "3/8-16 Tapped Hole1",
            "persist_reference_base64": "UEYAAAQAAAD//v8AAAAAAAcAAABrAAAAagAAAGkAAABoAAAAZwAAAGYAAABlAAAA",
            "persist_reference_sha256": "3b8b7c30d93f27f936e9507810dc26ba49c28019b98dc9f56cb903757fd97fc1",
            "component": null,
            "geometry": {
              "box": [
                -0.0381,
                -0.036512499999999996,
                -0.019700239999999994,
                0.0381,
                0.03492500000000002,
                0.01905
              ],
              "face_count": 27,
              "edge_count": 38,
              "vertex_count": 14
            },
            "stable_id": "3b8b7c30d93f27f936e9507810dc26ba49c28019b98dc9f56cb903757fd97fc1"
          }
        ]
      }
    },
    "step_inference": {
      "available": true,
      "face_count": 42,
      "surface_counts": {
        "bspline": 4,
        "cone": 8,
        "cylinder": 15,
        "plane": 11,
        "torus": 4
      },
      "axis_count": 23,
      "repeat_spacings_mm": [
        {
          "spacing_mm": 43.8415,
          "pair_count": 4
        },
        {
          "spacing_mm": 55.6233,
          "pair_count": 4
        },
        {
          "spacing_mm": 23.8125,
          "pair_count": 2
        },
        {
          "spacing_mm": 50.8,
          "pair_count": 2
        },
        {
          "spacing_mm": 56.1041,
          "pair_count": 2
        },
        {
          "spacing_mm": 28.3981,
          "pair_count": 2
        },
        {
          "spacing_mm": 34.1161,
          "pair_count": 2
        },
        {
          "spacing_mm": 31.7954,
          "pair_count": 2
        },
        {
          "spacing_mm": 34.1958,
          "pair_count": 2
        },
        {
          "spacing_mm": 44.4783,
          "pair_count": 2
        },
        {
          "spacing_mm": 48.3299,
          "pair_count": 2
        },
        {
          "spacing_mm": 46.7206,
          "pair_count": 2
        }
      ],
      "metrics": {
        "bounding_box_mm": [
          -38.1000001,
          -36.5125001,
          -19.70024,
          38.1000001,
          34.9250001,
          19.0500001
        ],
        "volume_mm3": 115444.317961501,
        "surface_area_mm2": 24203.563772468,
        "solid_count": 1,
        "face_count": 42,
        "edge_count": 92,
        "vertex_count": 58
      },
      "error": null,
      "truth_comparison": {
        "expected_from_evidence": {
          "bounding_box_mm": [
            -38.1,
            -36.5125,
            -19.70024,
            38.1,
            34.925,
            19.05
          ],
          "volume_mm3": 115438.917429592,
          "surface_area_mm2": 24204.829542201,
          "solid_count": 1,
          "face_count": 27,
          "edge_count": 38,
          "vertex_count": 14
        },
        "comparisons": {
          "volume_mm3": {
            "expected": 115438.917429592,
            "actual": 115444.317961501,
            "absolute_delta": 5.400531909006531,
            "within_tolerance": true
          },
          "surface_area_mm2": {
            "expected": 24204.829542201,
            "actual": 24203.563772468,
            "absolute_delta": 1.2657697330032534,
            "within_tolerance": true
          },
          "bounding_box_mm": {
            "expected": [
              -38.1,
              -36.5125,
              -19.70024,
              38.1,
              34.925,
              19.05
            ],
            "actual": [
              -38.1000001,
              -36.5125001,
              -19.70024,
              38.1000001,
              34.9250001,
              19.0500001
            ],
            "max_absolute_delta": 1.0000000116860974e-07,
            "within_tolerance": true
          },
          "solid_count": {
            "expected": 1,
            "actual": 1,
            "matches": true
          },
          "face_count": {
            "expected": 27,
            "actual": 42,
            "matches": false
          },
          "edge_count": {
            "expected": 38,
            "actual": 92,
            "matches": false
          },
          "vertex_count": {
            "expected": 14,
            "actual": 58,
            "matches": false
          }
        },
        "numeric_geometry_match": true,
        "topology_counts_match": false
      }
    },
    "source_has_modeling_features": true
  }
}