{
  "schema": "cad.cdsl.llm.v1",
  "schema_version": "1.1.0",
  "kind": "part",
  "part_id": "011524",
  "geometry": {
    "sketches": [
      {
        "id": "sk_001",
        "name": "原点",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": []
        }
      },
      {
        "id": "sk_002",
        "name": "草图1",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    0.0,
                    20.5
                  ],
                  "end": [
                    4.6,
                    20.5
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    4.6,
                    20.5
                  ],
                  "end": [
                    4.6,
                    -20.5
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    4.6,
                    -20.5
                  ],
                  "end": [
                    0.0,
                    -20.5
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    0.0,
                    -20.5
                  ],
                  "end": [
                    0.0,
                    20.5
                  ]
                }
              ]
            }
          ],
          "construction": [
            {
              "type": "line",
              "start": [
                0.0,
                -20.5
              ],
              "end": [
                0.0,
                20.5
              ]
            }
          ]
        }
      },
      {
        "id": "sk_003",
        "name": "草图2",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -4.6,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "arc",
                  "start": [
                    10.5,
                    -20.5
                  ],
                  "end": [
                    18.0,
                    -13.0
                  ],
                  "center": [
                    10.5,
                    -13.0
                  ],
                  "radius_mm": 7.5,
                  "clockwise": false
                },
                {
                  "type": "line",
                  "start": [
                    18.0,
                    -13.0
                  ],
                  "end": [
                    18.0,
                    13.0
                  ]
                },
                {
                  "type": "arc",
                  "start": [
                    18.0,
                    13.0
                  ],
                  "end": [
                    10.5,
                    20.5
                  ],
                  "center": [
                    10.5,
                    13.0
                  ],
                  "radius_mm": 7.5,
                  "clockwise": false
                },
                {
                  "type": "line",
                  "start": [
                    10.5,
                    20.5
                  ],
                  "end": [
                    0.0,
                    20.5
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    0.0,
                    20.5
                  ],
                  "end": [
                    0.0,
                    -20.5
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    0.0,
                    -20.5
                  ],
                  "end": [
                    10.5,
                    -20.5
                  ]
                }
              ]
            }
          ]
        }
      },
      {
        "id": "sk_004",
        "name": "草图3",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    -41.0,
                    41.0
                  ],
                  "end": [
                    -41.0,
                    -41.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -41.0,
                    -41.0
                  ],
                  "end": [
                    41.0,
                    -41.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    41.0,
                    -41.0
                  ],
                  "end": [
                    41.0,
                    41.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    41.0,
                    41.0
                  ],
                  "end": [
                    -41.0,
                    41.0
                  ]
                }
              ]
            },
            {
              "role": "inner",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    -4.6,
                    20.5
                  ],
                  "end": [
                    -4.6,
                    10.35
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -4.6,
                    10.35
                  ],
                  "end": [
                    4.85,
                    10.35
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    4.85,
                    10.35
                  ],
                  "end": [
                    4.85,
                    -0.2
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    4.85,
                    -0.2
                  ],
                  "end": [
                    -4.6,
                    -0.2
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -4.6,
                    -0.2
                  ],
                  "end": [
                    -4.6,
                    -10.05
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -4.6,
                    -10.05
                  ],
                  "end": [
                    4.85,
                    -10.05
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    4.85,
                    -10.05
                  ],
                  "end": [
                    4.85,
                    -20.5
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    4.85,
                    -20.5
                  ],
                  "end": [
                    18.0,
                    -20.5
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    18.0,
                    -20.5
                  ],
                  "end": [
                    18.0,
                    20.5
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    18.0,
                    20.5
                  ],
                  "end": [
                    -4.6,
                    20.5
                  ]
                }
              ]
            }
          ]
        }
      },
      {
        "id": "sk_005",
        "name": "草图4",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    0.0,
                    20.5
                  ],
                  "end": [
                    2.5,
                    20.5
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    2.5,
                    20.5
                  ],
                  "end": [
                    2.5,
                    -20.5
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    2.5,
                    -20.5
                  ],
                  "end": [
                    0.0,
                    -20.5
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    0.0,
                    -20.5
                  ],
                  "end": [
                    0.0,
                    20.5
                  ]
                }
              ]
            }
          ],
          "construction": [
            {
              "type": "line",
              "start": [
                0.0,
                -20.5
              ],
              "end": [
                0.0,
                20.5
              ]
            }
          ]
        }
      },
      {
        "id": "sk_006",
        "name": "hole1r_to_bolt",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": []
        }
      },
      {
        "id": "sk_007",
        "name": "hole2r_to_bolt",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": []
        }
      },
      {
        "id": "sk_008",
        "name": "hole3r_to_bolt",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": []
        }
      },
      {
        "id": "sk_009",
        "name": "r_pin",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": []
        }
      }
    ]
  },
  "features": [
    {
      "id": "f_001",
      "name": "前视基准面",
      "atomic_id": "reference_plane",
      "depends_on": [],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            1.0,
            0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 10
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_002",
      "name": "上视基准面",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_001"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 10
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_004",
      "name": "旋转1",
      "atomic_id": "revolve_add",
      "depends_on": [
        "f_001"
      ],
      "params": {
        "angle_deg": 360.0,
        "axis": {
          "origin_mm": [
            0.0,
            -20.5,
            0.0
          ],
          "direction": [
            0.0,
            1.0,
            0.0
          ]
        },
        "reverse": true,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_002",
      "selectors": [
        {
          "kind": "axis",
          "stable_id": "5e0c0baf004eb2134f589f2d42497b9238591a46b50a11111932e0cb8d3a1721",
          "source": "solidworks",
          "confidence": 1.0,
          "geometry": {
            "start": [
              0.0,
              -0.0205,
              0.0
            ],
            "end": [
              0.0,
              0.0205,
              0.0
            ]
          }
        }
      ]
    },
    {
      "id": "f_005",
      "name": "基准面1",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_001"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            -0.0,
            -4.6,
            -0.0
          ],
          "normal": [
            0.0,
            1.0,
            0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 4.6,
        "angle_rad": 0.0,
        "reverse": true,
        "solidworks_type": 5,
        "references": [
          {
            "kind": "plane",
            "stable_id": "46665b39295d4001bcbef6f37ec0c75c219ac67a07e32a964234a868b3672da2",
            "source": "solidworks",
            "confidence": 1.0,
            "owner_feature_id": "f_001"
          }
        ]
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "plane",
          "stable_id": "46665b39295d4001bcbef6f37ec0c75c219ac67a07e32a964234a868b3672da2",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_001"
        }
      ]
    },
    {
      "id": "f_013",
      "name": "基准面4",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_001"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            -0.0,
            -2.6,
            -0.0
          ],
          "normal": [
            0.0,
            1.0,
            0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 2.6,
        "angle_rad": 0.0,
        "reverse": true,
        "solidworks_type": 5,
        "references": [
          {
            "kind": "plane",
            "stable_id": "46665b39295d4001bcbef6f37ec0c75c219ac67a07e32a964234a868b3672da2",
            "source": "solidworks",
            "confidence": 1.0,
            "owner_feature_id": "f_001"
          }
        ]
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "plane",
          "stable_id": "46665b39295d4001bcbef6f37ec0c75c219ac67a07e32a964234a868b3672da2",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_001"
        }
      ]
    },
    {
      "id": "f_003",
      "name": "右视基准面",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_002"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            1.0,
            0.0,
            0.0
          ],
          "x_dir": [
            0.0,
            1.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 10
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_006",
      "name": "凸台-拉伸1",
      "atomic_id": "extrude_add_blind",
      "depends_on": [
        "f_005",
        "f_004"
      ],
      "params": {
        "distance_mm": 2.0,
        "reverse": false,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_003"
    },
    {
      "id": "f_007",
      "name": "切除-拉伸1",
      "atomic_id": "extrude_cut_blind",
      "depends_on": [
        "f_001",
        "f_004"
      ],
      "params": {
        "distance_mm": 41.0,
        "reverse": true,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        },
        "reverse_distance_mm": 41.0,
        "reverse_end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_004"
    },
    {
      "id": "f_008",
      "name": "切除-旋转1",
      "atomic_id": "revolve_cut",
      "depends_on": [
        "f_001",
        "f_004"
      ],
      "params": {
        "angle_deg": 360.0,
        "axis": {
          "origin_mm": [
            0.0,
            -20.5,
            0.0
          ],
          "direction": [
            0.0,
            1.0,
            0.0
          ]
        },
        "reverse": true,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_005",
      "selectors": [
        {
          "kind": "axis",
          "stable_id": "f6c6d2ea7486947695eacfe91c0ecd156d5a701897340742b4f329808de4b19b",
          "source": "solidworks",
          "confidence": 1.0,
          "geometry": {
            "start": [
              0.0,
              -0.0205,
              0.0
            ],
            "end": [
              0.0,
              0.0205,
              0.0
            ]
          }
        }
      ]
    },
    {
      "id": "f_009",
      "name": "基准面2",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_002"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            12.5
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 12.5,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 5,
        "references": [
          {
            "kind": "plane",
            "stable_id": "3a59788dcc6fc4588146380df745485f1125d10e3ba413489a3142d9f9beb78a",
            "source": "solidworks",
            "confidence": 1.0,
            "owner_feature_id": "f_002"
          }
        ]
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "plane",
          "stable_id": "3a59788dcc6fc4588146380df745485f1125d10e3ba413489a3142d9f9beb78a",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_002"
        }
      ]
    },
    {
      "id": "f_011",
      "name": "基准面3",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_002"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -12.5
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 12.5,
        "angle_rad": 0.0,
        "reverse": true,
        "solidworks_type": 5,
        "references": [
          {
            "kind": "plane",
            "stable_id": "3a59788dcc6fc4588146380df745485f1125d10e3ba413489a3142d9f9beb78a",
            "source": "solidworks",
            "confidence": 1.0,
            "owner_feature_id": "f_002"
          }
        ]
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "plane",
          "stable_id": "3a59788dcc6fc4588146380df745485f1125d10e3ba413489a3142d9f9beb78a",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_002"
        }
      ]
    },
    {
      "id": "f_014",
      "name": "hole1r_to_bolt XY",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_013"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": -1
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_010",
      "name": "孔1",
      "atomic_id": "hole_wizard",
      "depends_on": [
        "f_006"
      ],
      "params": {
        "hole_type": "hole_wizard",
        "diameter_mm": 5.5,
        "depth_mm": 2.0,
        "end_condition": {
          "solidworks_code": 0,
          "type": "blind"
        },
        "positions": [
          {
            "mm": [
              10.5,
              12.5,
              0.0
            ]
          }
        ]
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_012",
      "name": "孔2",
      "atomic_id": "hole_wizard",
      "depends_on": [
        "f_006"
      ],
      "params": {
        "hole_type": "hole_wizard",
        "diameter_mm": 5.5,
        "depth_mm": 2.0,
        "end_condition": {
          "solidworks_code": 0,
          "type": "blind"
        },
        "positions": [
          {
            "mm": [
              10.5,
              -12.5,
              0.0
            ]
          }
        ]
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_015",
      "name": "hole1r_to_bolt XZ",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_014"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            1.0,
            0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": -1
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_016",
      "name": "hole1r_to_bolt YZ",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_015"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            1.0,
            0.0,
            0.0
          ],
          "x_dir": [
            0.0,
            1.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": -1
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_017",
      "name": "hole1r_to_bolt X",
      "atomic_id": "reference_axis",
      "depends_on": [
        "f_014",
        "f_015"
      ],
      "params": {
        "axis": {
          "selector": {
            "kind": "feature",
            "stable_id": "13648a88fbc3d3ecafaf01cd69bcbbee618a9f1b37ebdc0a95083e1a72678b77",
            "source": "solidworks",
            "confidence": 1.0
          }
        }
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "13648a88fbc3d3ecafaf01cd69bcbbee618a9f1b37ebdc0a95083e1a72678b77",
          "source": "solidworks",
          "confidence": 1.0
        },
        {
          "kind": "plane",
          "stable_id": "13648a88fbc3d3ecafaf01cd69bcbbee618a9f1b37ebdc0a95083e1a72678b77",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_014"
        },
        {
          "kind": "plane",
          "stable_id": "077785ab792a58c344386ede3fbb8f258b354f53b4ff2b76375a521032acd4b6",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_015"
        }
      ]
    },
    {
      "id": "f_018",
      "name": "hole1r_to_bolt Y",
      "atomic_id": "reference_axis",
      "depends_on": [
        "f_014",
        "f_016"
      ],
      "params": {
        "axis": {
          "selector": {
            "kind": "feature",
            "stable_id": "13648a88fbc3d3ecafaf01cd69bcbbee618a9f1b37ebdc0a95083e1a72678b77",
            "source": "solidworks",
            "confidence": 1.0
          }
        }
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "13648a88fbc3d3ecafaf01cd69bcbbee618a9f1b37ebdc0a95083e1a72678b77",
          "source": "solidworks",
          "confidence": 1.0
        },
        {
          "kind": "plane",
          "stable_id": "13648a88fbc3d3ecafaf01cd69bcbbee618a9f1b37ebdc0a95083e1a72678b77",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_014"
        },
        {
          "kind": "plane",
          "stable_id": "6fec6b9982863b120d5a40b2468a6c8dce08d2c499768c82c41b0c37615d5364",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_016"
        }
      ]
    },
    {
      "id": "f_019",
      "name": "hole1r_to_bolt Z",
      "atomic_id": "reference_axis",
      "depends_on": [
        "f_016",
        "f_015"
      ],
      "params": {
        "axis": {
          "selector": {
            "kind": "feature",
            "stable_id": "6fec6b9982863b120d5a40b2468a6c8dce08d2c499768c82c41b0c37615d5364",
            "source": "solidworks",
            "confidence": 1.0
          }
        }
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "6fec6b9982863b120d5a40b2468a6c8dce08d2c499768c82c41b0c37615d5364",
          "source": "solidworks",
          "confidence": 1.0
        },
        {
          "kind": "plane",
          "stable_id": "6fec6b9982863b120d5a40b2468a6c8dce08d2c499768c82c41b0c37615d5364",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_016"
        },
        {
          "kind": "plane",
          "stable_id": "077785ab792a58c344386ede3fbb8f258b354f53b4ff2b76375a521032acd4b6",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_015"
        }
      ]
    },
    {
      "id": "f_020",
      "name": "hole2r_to_bolt XY",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_019"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": -1
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_021",
      "name": "hole2r_to_bolt XZ",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_020"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            1.0,
            0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": -1
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_022",
      "name": "hole2r_to_bolt YZ",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_021"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            1.0,
            0.0,
            0.0
          ],
          "x_dir": [
            0.0,
            1.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": -1
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_023",
      "name": "hole2r_to_bolt X",
      "atomic_id": "reference_axis",
      "depends_on": [
        "f_020",
        "f_021"
      ],
      "params": {
        "axis": {
          "selector": {
            "kind": "feature",
            "stable_id": "b2ed31cc8fca29a76ecd8f792d0dd68a73a0cdb3a942258bc7dcf12dd50e181e",
            "source": "solidworks",
            "confidence": 1.0
          }
        }
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "b2ed31cc8fca29a76ecd8f792d0dd68a73a0cdb3a942258bc7dcf12dd50e181e",
          "source": "solidworks",
          "confidence": 1.0
        },
        {
          "kind": "plane",
          "stable_id": "b2ed31cc8fca29a76ecd8f792d0dd68a73a0cdb3a942258bc7dcf12dd50e181e",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_020"
        },
        {
          "kind": "plane",
          "stable_id": "c3730b5e352db9fa2598cd29c844befcaa4c8429a6f3d34b857f70c8c1341d44",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_021"
        }
      ]
    },
    {
      "id": "f_024",
      "name": "hole2r_to_bolt Y",
      "atomic_id": "reference_axis",
      "depends_on": [
        "f_020",
        "f_022"
      ],
      "params": {
        "axis": {
          "selector": {
            "kind": "feature",
            "stable_id": "b2ed31cc8fca29a76ecd8f792d0dd68a73a0cdb3a942258bc7dcf12dd50e181e",
            "source": "solidworks",
            "confidence": 1.0
          }
        }
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "b2ed31cc8fca29a76ecd8f792d0dd68a73a0cdb3a942258bc7dcf12dd50e181e",
          "source": "solidworks",
          "confidence": 1.0
        },
        {
          "kind": "plane",
          "stable_id": "b2ed31cc8fca29a76ecd8f792d0dd68a73a0cdb3a942258bc7dcf12dd50e181e",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_020"
        },
        {
          "kind": "plane",
          "stable_id": "cfdba9bb67ccbcbafd3891c943c0eda845ce9082591e3244fad9f59f8e6e8b58",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_022"
        }
      ]
    },
    {
      "id": "f_025",
      "name": "hole2r_to_bolt Z",
      "atomic_id": "reference_axis",
      "depends_on": [
        "f_022",
        "f_021"
      ],
      "params": {
        "axis": {
          "selector": {
            "kind": "feature",
            "stable_id": "cfdba9bb67ccbcbafd3891c943c0eda845ce9082591e3244fad9f59f8e6e8b58",
            "source": "solidworks",
            "confidence": 1.0
          }
        }
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "cfdba9bb67ccbcbafd3891c943c0eda845ce9082591e3244fad9f59f8e6e8b58",
          "source": "solidworks",
          "confidence": 1.0
        },
        {
          "kind": "plane",
          "stable_id": "cfdba9bb67ccbcbafd3891c943c0eda845ce9082591e3244fad9f59f8e6e8b58",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_022"
        },
        {
          "kind": "plane",
          "stable_id": "c3730b5e352db9fa2598cd29c844befcaa4c8429a6f3d34b857f70c8c1341d44",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_021"
        }
      ]
    },
    {
      "id": "f_026",
      "name": "hole3r_to_bolt XY",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_025"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": -1
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_027",
      "name": "hole3r_to_bolt XZ",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_026"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            1.0,
            0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": -1
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_028",
      "name": "hole3r_to_bolt YZ",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_027"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            1.0,
            0.0,
            0.0
          ],
          "x_dir": [
            0.0,
            1.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": -1
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_029",
      "name": "hole3r_to_bolt X",
      "atomic_id": "reference_axis",
      "depends_on": [
        "f_026",
        "f_027"
      ],
      "params": {
        "axis": {
          "selector": {
            "kind": "feature",
            "stable_id": "7d1ebf4d7be165da92ad8c6ad479719ffb7f50574ac9d079f26c39c67711bce6",
            "source": "solidworks",
            "confidence": 1.0
          }
        }
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "7d1ebf4d7be165da92ad8c6ad479719ffb7f50574ac9d079f26c39c67711bce6",
          "source": "solidworks",
          "confidence": 1.0
        },
        {
          "kind": "plane",
          "stable_id": "7d1ebf4d7be165da92ad8c6ad479719ffb7f50574ac9d079f26c39c67711bce6",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_026"
        },
        {
          "kind": "plane",
          "stable_id": "d9d71ab4ceb9dfd4d20fc76210c8942cc6f3d220af86ed021979defc6652eea5",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_027"
        }
      ]
    },
    {
      "id": "f_030",
      "name": "hole3r_to_bolt Y",
      "atomic_id": "reference_axis",
      "depends_on": [
        "f_026",
        "f_028"
      ],
      "params": {
        "axis": {
          "selector": {
            "kind": "feature",
            "stable_id": "7d1ebf4d7be165da92ad8c6ad479719ffb7f50574ac9d079f26c39c67711bce6",
            "source": "solidworks",
            "confidence": 1.0
          }
        }
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "7d1ebf4d7be165da92ad8c6ad479719ffb7f50574ac9d079f26c39c67711bce6",
          "source": "solidworks",
          "confidence": 1.0
        },
        {
          "kind": "plane",
          "stable_id": "7d1ebf4d7be165da92ad8c6ad479719ffb7f50574ac9d079f26c39c67711bce6",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_026"
        },
        {
          "kind": "plane",
          "stable_id": "6c14b3e0260f26743b0086a07865f83453d367912f0c6bf1d3872791cd69b00a",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_028"
        }
      ]
    },
    {
      "id": "f_031",
      "name": "hole3r_to_bolt Z",
      "atomic_id": "reference_axis",
      "depends_on": [
        "f_028",
        "f_027"
      ],
      "params": {
        "axis": {
          "selector": {
            "kind": "feature",
            "stable_id": "6c14b3e0260f26743b0086a07865f83453d367912f0c6bf1d3872791cd69b00a",
            "source": "solidworks",
            "confidence": 1.0
          }
        }
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "6c14b3e0260f26743b0086a07865f83453d367912f0c6bf1d3872791cd69b00a",
          "source": "solidworks",
          "confidence": 1.0
        },
        {
          "kind": "plane",
          "stable_id": "6c14b3e0260f26743b0086a07865f83453d367912f0c6bf1d3872791cd69b00a",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_028"
        },
        {
          "kind": "plane",
          "stable_id": "d9d71ab4ceb9dfd4d20fc76210c8942cc6f3d220af86ed021979defc6652eea5",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_027"
        }
      ]
    },
    {
      "id": "f_032",
      "name": "r_pin XY",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_031"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": -1
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_033",
      "name": "r_pin XZ",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_032"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            1.0,
            0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": -1
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_034",
      "name": "r_pin YZ",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_033"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            1.0,
            0.0,
            0.0
          ],
          "x_dir": [
            0.0,
            1.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": -1
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_035",
      "name": "r_pin X",
      "atomic_id": "reference_axis",
      "depends_on": [
        "f_032",
        "f_033"
      ],
      "params": {
        "axis": {
          "selector": {
            "kind": "feature",
            "stable_id": "533e47d766d905f64094d2ce36268b684f7aa91ef89d6fbe642f3a39690dcdab",
            "source": "solidworks",
            "confidence": 1.0
          }
        }
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "533e47d766d905f64094d2ce36268b684f7aa91ef89d6fbe642f3a39690dcdab",
          "source": "solidworks",
          "confidence": 1.0
        },
        {
          "kind": "plane",
          "stable_id": "533e47d766d905f64094d2ce36268b684f7aa91ef89d6fbe642f3a39690dcdab",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_032"
        },
        {
          "kind": "plane",
          "stable_id": "704abb55d841103ee0ab1dd6fb5a0c8c67f95637de3af482d6b274fe2edb9ce1",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_033"
        }
      ]
    },
    {
      "id": "f_036",
      "name": "r_pin Y",
      "atomic_id": "reference_axis",
      "depends_on": [
        "f_032",
        "f_034"
      ],
      "params": {
        "axis": {
          "selector": {
            "kind": "feature",
            "stable_id": "533e47d766d905f64094d2ce36268b684f7aa91ef89d6fbe642f3a39690dcdab",
            "source": "solidworks",
            "confidence": 1.0
          }
        }
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "533e47d766d905f64094d2ce36268b684f7aa91ef89d6fbe642f3a39690dcdab",
          "source": "solidworks",
          "confidence": 1.0
        },
        {
          "kind": "plane",
          "stable_id": "533e47d766d905f64094d2ce36268b684f7aa91ef89d6fbe642f3a39690dcdab",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_032"
        },
        {
          "kind": "plane",
          "stable_id": "4257fbcd2725bb9238c94beebab4cffa3cb1ef5815f5d29ccbc7375ca39f0a16",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_034"
        }
      ]
    },
    {
      "id": "f_037",
      "name": "r_pin Z",
      "atomic_id": "reference_axis",
      "depends_on": [
        "f_034",
        "f_033"
      ],
      "params": {
        "axis": {
          "selector": {
            "kind": "feature",
            "stable_id": "4257fbcd2725bb9238c94beebab4cffa3cb1ef5815f5d29ccbc7375ca39f0a16",
            "source": "solidworks",
            "confidence": 1.0
          }
        }
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "4257fbcd2725bb9238c94beebab4cffa3cb1ef5815f5d29ccbc7375ca39f0a16",
          "source": "solidworks",
          "confidence": 1.0
        },
        {
          "kind": "plane",
          "stable_id": "4257fbcd2725bb9238c94beebab4cffa3cb1ef5815f5d29ccbc7375ca39f0a16",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_034"
        },
        {
          "kind": "plane",
          "stable_id": "704abb55d841103ee0ab1dd6fb5a0c8c67f95637de3af482d6b274fe2edb9ce1",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_033"
        }
      ]
    }
  ],
  "meta": {
    "unit": "mm",
    "source": "01_紧固件/0106_销/010699_通用销/011524.solidworks_evidence_v2.json",
    "source_schema": "solidworks.cad_evidence.v2",
    "source_status": "hybrid_semantic_surfaceir_pending",
    "document_truth": {
      "mass_properties": {
        "available": true,
        "mass": 0.001959194331462506,
        "volume": 1.959194331462506e-06,
        "surface_area": 0.0022937314106504267,
        "center_of_mass": [
          0.005536254769071256,
          0.002772850696917079,
          -0.0018885511388564435
        ],
        "principal_moments": [
          8.820786764021561e-08,
          2.6274905890636556e-07,
          3.342734781394733e-07
        ],
        "principal_axes": null,
        "moment_of_inertia": null
      },
      "geometry": {
        "bounding_box": [
          -0.0046,
          -0.0205,
          -0.004600000000000002,
          0.018000000000000002,
          0.0205,
          0.0046
        ],
        "solid_body_count": 1,
        "bodies": [
          {
            "kind": "body",
            "dotnet_type": "System.__ComObject",
            "name": "孔2",
            "persist_reference_base64": "UEYAAAQAAAD//v8AAAAAAAYAAABqAAAAaQAAAGgAAABnAAAAZgAAAGUAAAA=",
            "persist_reference_sha256": "0a26bbf75646bd83d8870646ce4005d1ea62ef8846c2724b2f0430bdfd10750a",
            "component": null,
            "geometry": {
              "box": [
                -0.0046,
                -0.0205,
                -0.004600000000000002,
                0.018000000000000002,
                0.0205,
                0.0046
              ],
              "face_count": 18,
              "edge_count": 44,
              "vertex_count": 24
            },
            "stable_id": "0a26bbf75646bd83d8870646ce4005d1ea62ef8846c2724b2f0430bdfd10750a"
          }
        ]
      }
    },
    "step_inference": {
      "available": true,
      "face_count": 24,
      "surface_counts": {
        "cylinder": 14,
        "plane": 10
      },
      "axis_count": 14,
      "repeat_spacings_mm": [
        {
          "spacing_mm": 0.5,
          "pair_count": 2
        },
        {
          "spacing_mm": 25.5,
          "pair_count": 2
        }
      ],
      "metrics": {
        "bounding_box_mm": [
          -4.6,
          -20.5,
          -4.6,
          18.0,
          20.5,
          4.6
        ],
        "volume_mm3": 1959.194331463,
        "surface_area_mm2": 2293.73141065,
        "solid_count": 1,
        "face_count": 24,
        "edge_count": 66,
        "vertex_count": 44
      },
      "error": null,
      "truth_comparison": {
        "expected_from_evidence": {
          "bounding_box_mm": [
            -4.6,
            -20.5,
            -4.6,
            18.0,
            20.5,
            4.6
          ],
          "volume_mm3": 1959.194331463,
          "surface_area_mm2": 2293.73141065,
          "solid_count": 1,
          "face_count": 18,
          "edge_count": 44,
          "vertex_count": 24
        },
        "comparisons": {
          "volume_mm3": {
            "expected": 1959.194331463,
            "actual": 1959.194331463,
            "absolute_delta": 0.0,
            "within_tolerance": true
          },
          "surface_area_mm2": {
            "expected": 2293.73141065,
            "actual": 2293.73141065,
            "absolute_delta": 0.0,
            "within_tolerance": true
          },
          "bounding_box_mm": {
            "expected": [
              -4.6,
              -20.5,
              -4.6,
              18.0,
              20.5,
              4.6
            ],
            "actual": [
              -4.6,
              -20.5,
              -4.6,
              18.0,
              20.5,
              4.6
            ],
            "max_absolute_delta": 0.0,
            "within_tolerance": true
          },
          "solid_count": {
            "expected": 1,
            "actual": 1,
            "matches": true
          },
          "face_count": {
            "expected": 18,
            "actual": 24,
            "matches": false
          },
          "edge_count": {
            "expected": 44,
            "actual": 66,
            "matches": false
          },
          "vertex_count": {
            "expected": 24,
            "actual": 44,
            "matches": false
          }
        },
        "numeric_geometry_match": true,
        "topology_counts_match": false
      }
    },
    "source_has_modeling_features": true
  }
}