{ "schema": "cad.cdsl.llm.v1", "schema_version": "1.1.0", "kind": "part", "part_id": "055398", "geometry": { "sketches": [ { "id": "sk_001", "name": "原点", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [] } }, { "id": "sk_002", "name": "草图1", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 0.0, 0.0 ], "end": [ 27.0, 0.0 ] }, { "type": "line", "start": [ 27.0, 0.0 ], "end": [ 27.0, 62.25 ] }, { "type": "line", "start": [ 27.0, 62.25 ], "end": [ 0.0, 62.25 ] }, { "type": "line", "start": [ 0.0, 62.25 ], "end": [ 0.0, 0.0 ] } ] } ] } }, { "id": "sk_003", "name": "草图8", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, -1.0 ], "y_dir": [ 0.707106781, 0.0, 0.707106781 ], "normal": [ 0.0, -1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 14.0, 0.0 ], "end": [ 8.0, -0.0 ] }, { "type": "line", "start": [ 8.0, -0.0 ], "end": [ 8.0, 12.0 ] }, { "type": "line", "start": [ 8.0, 12.0 ], "end": [ 14.0, 12.0 ] }, { "type": "line", "start": [ 14.0, 12.0 ], "end": [ 14.0, 0.0 ] } ] } ] } }, { "id": "sk_004", "name": "草图9", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ -1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -27.0, 43.75 ], "end": [ -25.5, 43.75 ] }, { "type": "line", "start": [ -25.5, 43.75 ], "end": [ -25.5, 60.75 ] }, { "type": "line", "start": [ -25.5, 60.75 ], "end": [ -27.0, 60.75 ] }, { "type": "line", "start": [ -27.0, 60.75 ], "end": [ -27.0, 43.75 ] } ] } ] } }, { "id": "sk_005", "name": "草图10", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ -1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -27.0, 0.0 ], "end": [ -20.0, 0.0 ] }, { "type": "line", "start": [ -20.0, 0.0 ], "end": [ -20.0, 38.0 ] }, { "type": "line", "start": [ -20.0, 38.0 ], "end": [ -27.0, 38.0 ] }, { "type": "line", "start": [ -27.0, 38.0 ], "end": [ -27.0, 0.0 ] } ] } ] } }, { "id": "sk_006", "name": "草图11", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ -1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 0.0, 62.25 ], "end": [ -12.0, 62.25 ] }, { "type": "line", "start": [ -12.0, 62.25 ], "end": [ -12.0, 19.25 ] }, { "type": "line", "start": [ -12.0, 19.25 ], "end": [ 0.0, 19.25 ] }, { "type": "line", "start": [ 0.0, 19.25 ], "end": [ 0.0, 62.25 ] } ] } ] } }, { "id": "sk_007", "name": "草图16", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -11.0, 12.0 ], "end": [ -14.0, 12.0 ] }, { "type": "line", "start": [ -14.0, 12.0 ], "end": [ -14.0, 38.0 ] }, { "type": "line", "start": [ -14.0, 38.0 ], "end": [ -11.0, 38.0 ] }, { "type": "line", "start": [ -11.0, 38.0 ], "end": [ -11.0, 12.0 ] } ] } ] } }, { "id": "sk_008", "name": "草图19", "role": "profile", "workplane": { "origin_mm": [ 8.0, -0.0, -0.0 ], "x_dir": [ -1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "arc", "start": [ -11.5, 5.5 ], "end": [ -8.5, 5.5 ], "center": [ -10.0, 5.5 ], "radius_mm": 1.5, "clockwise": false }, { "type": "line", "start": [ -8.5, 5.5 ], "end": [ -8.5, 6.5 ] }, { "type": "arc", "start": [ -8.5, 6.5 ], "end": [ -11.5, 6.5 ], "center": [ -10.0, 6.5 ], "radius_mm": 1.5, "clockwise": false }, { "type": "line", "start": [ -11.5, 6.5 ], "end": [ -11.5, 5.5 ] } ] } ], "construction": [ { "type": "line", "start": [ -10.0, 5.5 ], "end": [ -10.0, 6.5 ] } ] } } ] }, "features": [ { "id": "f_001", "name": "前视基准面", "atomic_id": "reference_plane", "depends_on": [], "params": { "plane": { "origin_mm": [ 0.0, 0.0, 0.0 ], "normal": [ 0.0, 1.0, 0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": 10 }, "execution_status": "deferred" }, { "id": "f_002", "name": "上视基准面", "atomic_id": "reference_plane", "depends_on": [ "f_001" ], "params": { "plane": { "origin_mm": [ 0.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ], "x_dir": [ 1.0, 0.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": 10 }, "execution_status": "deferred" }, { "id": "f_004", "name": "凸台-拉伸1", "atomic_id": "extrude_add_blind", "depends_on": [ "f_001" ], "params": { "distance_mm": 14.0, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_002" }, { "id": "f_003", "name": "右视基准面", "atomic_id": "reference_plane", "depends_on": [ "f_002" ], "params": { "plane": { "origin_mm": [ 0.0, 0.0, 0.0 ], "normal": [ 1.0, 0.0, 0.0 ], "x_dir": [ 0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": 10 }, "execution_status": "deferred" }, { "id": "f_005", "name": "切除-拉伸7", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_004" ], "params": { "distance_mm": 0.0, "reverse": false, "end_condition": { "type": "through_all", "solidworks_code": 1 } }, "execution_status": "deferred", "sketch_id": "sk_003" }, { "id": "f_006", "name": "切除-拉伸8", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_004" ], "params": { "distance_mm": 0.0, "reverse": false, "end_condition": { "type": "through_all", "solidworks_code": 1 } }, "execution_status": "deferred", "sketch_id": "sk_004" }, { "id": "f_007", "name": "切除-拉伸9", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_004" ], "params": { "distance_mm": 0.0, "reverse": false, "end_condition": { "type": "through_all", "solidworks_code": 1 } }, "execution_status": "deferred", "sketch_id": "sk_005" }, { "id": "f_011", "name": "M3 六角凹头螺钉的柱形沉头孔1", "atomic_id": "hole_wizard", "depends_on": [ "f_004" ], "params": { "hole_type": "六角凹头 ISO 4762", "diameter_mm": 3.4, "depth_mm": 14.0, "end_condition": { "solidworks_code": 1, "type": "through_all" }, "positions": [ { "mm": [ -4.0, 6.0, 0.0 ] }, { "mm": [ -16.0, 6.0, 0.0 ] } ], "counterbore": { "diameter_mm": 6.5, "depth_mm": 3.4 } }, "execution_status": "deferred", "unresolved": [ "hole has no captured semantic selections" ] }, { "id": "f_008", "name": "切除-拉伸10", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_004", "f_007" ], "params": { "distance_mm": 0.0, "reverse": false, "end_condition": { "type": "through_all", "solidworks_code": 1 } }, "execution_status": "deferred", "sketch_id": "sk_006" }, { "id": "f_012", "name": "倒角1", "atomic_id": "chamfer", "depends_on": [ "f_007", "f_004" ], "params": { "distance_mm": 1.0, "angle_rad": 0.78539816339745 }, "execution_status": "deferred" }, { "id": "f_013", "name": "切除-拉伸11", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_007", "f_004", "f_005" ], "params": { "distance_mm": 0.0, "reverse": false, "end_condition": { "type": "through_all", "solidworks_code": 1 } }, "execution_status": "deferred", "sketch_id": "sk_007" }, { "id": "f_014", "name": "大小mm 暗销孔1", "atomic_id": "hole_wizard", "depends_on": [ "f_005", "f_004" ], "params": { "hole_type": "暗销孔", "diameter_mm": 3.0, "depth_mm": 5.0, "end_condition": { "solidworks_code": 0, "type": "blind" }, "positions": [ { "mm": [ -10.0, 6.0, 0.0 ] } ] }, "execution_status": "deferred", "unresolved": [ "hole has no captured semantic selections" ] }, { "id": "f_015", "name": "切除-拉伸12", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_005", "f_004" ], "params": { "distance_mm": 5.0, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_008" }, { "id": "f_009", "name": "M2.5 六角凹头螺钉的柱形沉头孔1", "atomic_id": "hole_wizard", "depends_on": [ "f_008", "f_004" ], "params": { "hole_type": "六角凹头 ISO 4762", "diameter_mm": 2.9, "depth_mm": 15.0, "end_condition": { "solidworks_code": 1, "type": "through_all" }, "positions": [ { "mm": [ 7.0, 46.25, 0.0 ] }, { "mm": [ 7.0, 58.25, 0.0 ] } ], "counterbore": { "diameter_mm": 5.5, "depth_mm": 2.9 }, "host_face": { "kind": "face", "stable_id": "step-face-0e1f0063123c20601282f1e5", "source": "inferred_from_step", "confidence": 0.8, "geometry": { "bbox_mm": [ -0.0, -0.0, 0.0, 27.0, 62.25, 0.0 ], "center_mm": [ 14.754306696, 30.123370558, 0.0 ], "normal": [ 0.0, 0.0, -1.0 ], "surface_type": "plane" } } }, "execution_status": "deferred", "selectors": [ { "kind": "face", "stable_id": "step-face-0e1f0063123c20601282f1e5", "source": "inferred_from_step", "confidence": 0.8, "geometry": { "bbox_mm": [ -0.0, -0.0, 0.0, 27.0, 62.25, 0.0 ], "center_mm": [ 14.754306696, 30.123370558, 0.0 ], "normal": [ 0.0, 0.0, -1.0 ], "surface_type": "plane" } } ] }, { "id": "f_010", "name": "倒角2", "atomic_id": "chamfer", "depends_on": [ "f_008", "f_004" ], "params": { "distance_mm": 1.0, "angle_rad": 0.78539816339745 }, "execution_status": "deferred" }, { "id": "f_016", "name": "M4 螺纹孔1", "atomic_id": "hole_wizard", "depends_on": [ "f_004", "f_008", "f_013" ], "params": { "hole_type": "螺纹孔", "diameter_mm": 4.0, "depth_mm": 14.0, "end_condition": { "solidworks_code": 1, "type": "through_all" }, "positions": [ { "mm": [ 16.0, 32.25, 0.0 ] }, { "mm": [ 16.0, 17.25, 0.0 ] }, { "mm": [ 20.0, 54.25, 0.0 ] }, { "mm": [ 20.0, 41.25, 0.0 ] } ], "thread": { "diameter_mm": 4.0, "depth_mm": 14.0, "class": "1B" }, "host_face": { "kind": "face", "stable_id": "step-face-0e1f0063123c20601282f1e5", "source": "inferred_from_step", "confidence": 0.8, "geometry": { "bbox_mm": [ -0.0, -0.0, 0.0, 27.0, 62.25, 0.0 ], "center_mm": [ 14.754306696, 30.123370558, 0.0 ], "normal": [ 0.0, 0.0, -1.0 ], "surface_type": "plane" } } }, "execution_status": "deferred", "selectors": [ { "kind": "face", "stable_id": "step-face-0e1f0063123c20601282f1e5", "source": "inferred_from_step", "confidence": 0.8, "geometry": { "bbox_mm": [ -0.0, -0.0, 0.0, 27.0, 62.25, 0.0 ], "center_mm": [ 14.754306696, 30.123370558, 0.0 ], "normal": [ 0.0, 0.0, -1.0 ], "surface_type": "plane" } } ] }, { "id": "f_017", "name": "大小mm 暗销孔2", "atomic_id": "hole_wizard", "depends_on": [ "f_004", "f_012" ], "params": { "hole_type": "暗销孔", "diameter_mm": 3.0, "depth_mm": 3.0, "end_condition": { "solidworks_code": 0, "type": "blind" }, "positions": [ { "mm": [ -10.0, -4.0, 0.0 ] } ] }, "execution_status": "deferred", "unresolved": [ "hole has no captured semantic selections" ] } ], "meta": { "unit": "mm", "source": "055398.solidworks_evidence_v2.json", "source_schema": "solidworks.cad_evidence.v2", "source_status": "complete_with_blockers", "document_truth": { "mass_properties": { "available": true, "mass": 0.06860132831714576, "volume": 8.795042091941763e-06, "surface_area": 0.004899866528213239, "center_of_mass": [ 0.015347740531765783, 0.03263512714814972, 0.005992356064767988 ], "principal_moments": [ 2.4204592953310148e-06, 2.6123235378200645e-05, 2.678025375882399e-05 ], "principal_axes": null, "moment_of_inertia": null }, "geometry": { "bounding_box": [ -6.938893903907228e-18, -1.3716044150450332e-18, 0.0, 0.027, 0.06225, 0.014000000000000002 ], "solid_body_count": 1, "bodies": [ { "kind": "body", "dotnet_type": "System.__ComObject", "name": "大小mm 暗销孔2", "persist_reference_base64": "UEYAAAQAAAD//v8AAAAAAAwAAACOAAAAjQAAAIwAAACLAAAAigAAAIkAAACHAAAAhgAAAIUAAACEAAAAggAAAHAAAAA=", "persist_reference_sha256": "c3af75856a97b7ce5c9a1da8a8a6087e91bc4885d7584c6fc1142493807e72d7", "component": null, "geometry": { "box": [ -6.938893903907228e-18, -1.3716044150450332e-18, 0.0, 0.027, 0.06225, 0.014000000000000002 ], "face_count": 47, "edge_count": 98, "vertex_count": 48 }, "stable_id": "c3af75856a97b7ce5c9a1da8a8a6087e91bc4885d7584c6fc1142493807e72d7" } ] } }, "step_inference": { "available": true, "face_count": 64, "surface_counts": { "cone": 8, "cylinder": 28, "plane": 28 }, "axis_count": 36, "repeat_spacings_mm": [ { "spacing_mm": 6.7268, "pair_count": 4 }, { "spacing_mm": 9.3808, "pair_count": 2 }, { "spacing_mm": 7.8102, "pair_count": 2 }, { "spacing_mm": 6.7082, "pair_count": 2 }, { "spacing_mm": 0.5, "pair_count": 2 }, { "spacing_mm": 12.0, "pair_count": 2 } ], "metrics": { "bounding_box_mm": [ -0.0, -0.0, 0.0, 27.0, 62.25, 14.0 ], "volume_mm3": 8795.042091942, "surface_area_mm2": 4899.866528213, "solid_count": 1, "face_count": 64, "edge_count": 160, "vertex_count": 104 }, "error": null, "truth_comparison": { "expected_from_evidence": { "bounding_box_mm": [ -0.0, -0.0, 0.0, 27.0, 62.25, 14.0 ], "volume_mm3": 8795.042091942, "surface_area_mm2": 4899.866528213, "solid_count": 1, "face_count": 47, "edge_count": 98, "vertex_count": 48 }, "comparisons": { "volume_mm3": { "expected": 8795.042091942, "actual": 8795.042091942, "absolute_delta": 0.0, "within_tolerance": true }, "surface_area_mm2": { "expected": 4899.866528213, "actual": 4899.866528213, "absolute_delta": 0.0, "within_tolerance": true }, "bounding_box_mm": { "expected": [ -0.0, -0.0, 0.0, 27.0, 62.25, 14.0 ], "actual": [ -0.0, -0.0, 0.0, 27.0, 62.25, 14.0 ], "max_absolute_delta": 0.0, "within_tolerance": true }, "solid_count": { "expected": 1, "actual": 1, "matches": true }, "face_count": { "expected": 47, "actual": 64, "matches": false }, "edge_count": { "expected": 98, "actual": 160, "matches": false }, "vertex_count": { "expected": 48, "actual": 104, "matches": false } }, "numeric_geometry_match": true, "topology_counts_match": false } }, "source_has_modeling_features": true } }