{
  "schema": "cad.cdsl.llm.v1",
  "schema_version": "1.1.0",
  "kind": "part",
  "part_id": "_Bearing-Housing",
  "geometry": {
    "sketches": [
      {
        "id": "sk_001",
        "name": "Origin",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": []
        }
      },
      {
        "id": "sk_002",
        "name": "Base Foot Print",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -1000.0,
            -0.0
          ],
          "x_dir": [
            -1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            0.0,
            1.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            -1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    -103.1875,
                    30.1625
                  ],
                  "end": [
                    103.1875,
                    30.1625
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    103.1875,
                    30.1625
                  ],
                  "end": [
                    103.1875,
                    -30.1625
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    103.1875,
                    -30.1625
                  ],
                  "end": [
                    -103.1875,
                    -30.1625
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -103.1875,
                    -30.1625
                  ],
                  "end": [
                    -103.1875,
                    30.1625
                  ]
                }
              ]
            }
          ],
          "construction": [
            {
              "type": "line",
              "start": [
                103.1875,
                30.1625
              ],
              "end": [
                -103.1875,
                -30.1625
              ]
            }
          ]
        }
      },
      {
        "id": "sk_003",
        "name": "Bearing Support",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "arc",
                  "start": [
                    -52.211671242,
                    19.003494214
                  ],
                  "end": [
                    52.211671242,
                    19.003494214
                  ],
                  "center": [
                    0.0,
                    0.0
                  ],
                  "radius_mm": 55.5625,
                  "clockwise": true
                },
                {
                  "type": "line",
                  "start": [
                    52.211671242,
                    19.003494214
                  ],
                  "end": [
                    71.840037915,
                    -34.925
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    71.840037915,
                    -34.925
                  ],
                  "end": [
                    -71.840037915,
                    -34.925
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -71.840037915,
                    -34.925
                  ],
                  "end": [
                    -52.211671242,
                    19.003494214
                  ]
                }
              ]
            }
          ]
        }
      },
      {
        "id": "sk_004",
        "name": "Sketch4",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            0.0,
            0.0,
            1.0
          ],
          "y_dir": [
            0.707106781,
            0.0,
            -0.707106781
          ],
          "normal": [
            -0.0,
            1.0,
            0.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    -30.1625,
                    -34.925
                  ],
                  "end": [
                    -14.207112333,
                    55.5625
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -14.207112333,
                    55.5625
                  ],
                  "end": [
                    -30.1625,
                    55.5625
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -30.1625,
                    55.5625
                  ],
                  "end": [
                    -30.1625,
                    -34.925
                  ]
                }
              ]
            }
          ]
        }
      },
      {
        "id": "sk_005",
        "name": "Sketch5",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            1000.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            0.0,
            1.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "arc",
                  "start": [
                    0.0,
                    -44.99991
                  ],
                  "end": [
                    0.0,
                    44.99991
                  ],
                  "center": [
                    0.0,
                    0.0
                  ],
                  "radius_mm": 44.99991,
                  "clockwise": false
                },
                {
                  "type": "line",
                  "start": [
                    0.0,
                    44.99991
                  ],
                  "end": [
                    0.0,
                    -44.99991
                  ]
                }
              ]
            }
          ]
        }
      },
      {
        "id": "sk_006",
        "name": "Sketch6",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            1000.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            0.0,
            -1.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            -1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "arc",
                  "start": [
                    78.184375,
                    -9.921875
                  ],
                  "end": [
                    78.184375,
                    9.921875
                  ],
                  "center": [
                    78.184375,
                    0.0
                  ],
                  "radius_mm": 9.921875,
                  "clockwise": true
                },
                {
                  "type": "line",
                  "start": [
                    78.184375,
                    9.921875
                  ],
                  "end": [
                    80.565625,
                    9.921875
                  ]
                },
                {
                  "type": "arc",
                  "start": [
                    80.565625,
                    9.921875
                  ],
                  "end": [
                    80.565625,
                    -9.921875
                  ],
                  "center": [
                    80.565625,
                    0.0
                  ],
                  "radius_mm": 9.921875,
                  "clockwise": true
                },
                {
                  "type": "line",
                  "start": [
                    80.565625,
                    -9.921875
                  ],
                  "end": [
                    78.184375,
                    -9.921875
                  ]
                }
              ]
            },
            {
              "role": "inner",
              "closed": true,
              "segments": [
                {
                  "type": "arc",
                  "start": [
                    -78.184375,
                    -9.921875
                  ],
                  "end": [
                    -78.184375,
                    9.921875
                  ],
                  "center": [
                    -78.184375,
                    0.0
                  ],
                  "radius_mm": 9.921875,
                  "clockwise": false
                },
                {
                  "type": "line",
                  "start": [
                    -78.184375,
                    9.921875
                  ],
                  "end": [
                    -80.565625,
                    9.921875
                  ]
                },
                {
                  "type": "arc",
                  "start": [
                    -80.565625,
                    9.921875
                  ],
                  "end": [
                    -80.565625,
                    -9.921875
                  ],
                  "center": [
                    -80.565625,
                    -0.0
                  ],
                  "radius_mm": 9.921875,
                  "clockwise": false
                },
                {
                  "type": "line",
                  "start": [
                    -80.565625,
                    -9.921875
                  ],
                  "end": [
                    -78.184375,
                    -9.921875
                  ]
                }
              ]
            }
          ],
          "construction": [
            {
              "type": "line",
              "start": [
                0.0,
                0.0
              ],
              "end": [
                0.0,
                -30.1625
              ]
            }
          ]
        }
      },
      {
        "id": "sk_007",
        "name": "Sketch7",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -1000.0,
            -0.0
          ],
          "x_dir": [
            -1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            0.0,
            1.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            -1.0
          ]
        },
        "profile": {
          "type": "circles",
          "items": [
            {
              "center": [
                -78.184375,
                0.0
              ],
              "radius_mm": 25.972703758
            },
            {
              "center": [
                78.184375,
                0.0
              ],
              "radius_mm": 25.972703758
            }
          ]
        }
      },
      {
        "id": "sk_008",
        "name": "Sketch9",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            1000.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            0.0,
            -1.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            -1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    -50.624171242,
                    30.1625
                  ],
                  "end": [
                    50.624171242,
                    30.1625
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    50.624171242,
                    30.1625
                  ],
                  "end": [
                    50.624171242,
                    -30.1625
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    50.624171242,
                    -30.1625
                  ],
                  "end": [
                    -50.624171242,
                    -30.1625
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -50.624171242,
                    -30.1625
                  ],
                  "end": [
                    -50.624171242,
                    30.1625
                  ]
                }
              ]
            }
          ],
          "construction": [
            {
              "type": "line",
              "start": [
                50.624171242,
                30.1625
              ],
              "end": [
                -50.624171242,
                -30.1625
              ]
            }
          ]
        }
      },
      {
        "id": "sk_009",
        "name": "Sketch8",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            0.0,
            -0.707106781,
            0.707106781
          ],
          "y_dir": [
            0.5,
            0.5,
            -0.707106781
          ],
          "normal": [
            0.281084637,
            0.678598345,
            0.678598345
          ]
        },
        "profile": {
          "type": "circle",
          "center": [
            0.0,
            0.0
          ],
          "radius_mm": 3.175
        }
      },
      {
        "id": "sk_010",
        "name": "Sketch10",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -30.1625,
            -0.0,
            -0.0
          ],
          "x_dir": [
            -1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "arc",
                  "start": [
                    41.338213286,
                    6.362013742
                  ],
                  "end": [
                    -41.338213286,
                    6.362013742
                  ],
                  "center": [
                    0.0,
                    0.0
                  ],
                  "radius_mm": 41.82491,
                  "clockwise": false
                },
                {
                  "type": "line",
                  "start": [
                    -41.338213286,
                    6.362013742
                  ],
                  "end": [
                    -50.624171242,
                    -53.975
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -50.624171242,
                    -53.975
                  ],
                  "end": [
                    50.624171242,
                    -53.975
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    50.624171242,
                    -53.975
                  ],
                  "end": [
                    41.338213286,
                    6.362013742
                  ]
                }
              ]
            }
          ]
        }
      },
      {
        "id": "sk_011",
        "name": "Sketch24",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            0.0,
            0.707106781,
            0.707106781
          ],
          "y_dir": [
            0.5,
            -0.5,
            -0.707106781
          ],
          "normal": [
            -0.281084637,
            0.678598345,
            -0.678598345
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    -18.33174305,
                    80.11724305
                  ],
                  "end": [
                    -17.26494305,
                    80.11724305
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -17.26494305,
                    80.11724305
                  ],
                  "end": [
                    -17.26494305,
                    79.48224305
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -17.26494305,
                    79.48224305
                  ],
                  "end": [
                    -16.29974305,
                    79.48224305
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -16.29974305,
                    79.48224305
                  ],
                  "end": [
                    -16.29974305,
                    71.10024305
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -16.29974305,
                    71.10024305
                  ],
                  "end": [
                    -19.47474305,
                    71.10024305
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -19.47474305,
                    71.10024305
                  ],
                  "end": [
                    -19.47474305,
                    73.64024305
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -19.47474305,
                    73.64024305
                  ],
                  "end": [
                    -20.87174305,
                    73.64024305
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -20.87174305,
                    73.64024305
                  ],
                  "end": [
                    -20.87174305,
                    74.91024305
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -20.87174305,
                    74.91024305
                  ],
                  "end": [
                    -18.20474305,
                    74.91024305
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -18.20474305,
                    74.91024305
                  ],
                  "end": [
                    -19.47474305,
                    78.08524305
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -19.47474305,
                    78.08524305
                  ],
                  "end": [
                    -18.33174305,
                    80.11724305
                  ]
                }
              ]
            }
          ],
          "construction": [
            {
              "type": "line",
              "start": [
                -16.29974305,
                -5.732170746
              ],
              "end": [
                -16.29974305,
                85.01723724
              ]
            }
          ]
        }
      },
      {
        "id": "sk_012",
        "name": "Sketch25",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            0.0
          ],
          "x_dir": [
            0.0,
            -0.707106781,
            0.707106781
          ],
          "y_dir": [
            0.5,
            0.5,
            -0.707106781
          ],
          "normal": [
            0.281084637,
            0.678598345,
            0.678598345
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    -3.959468146,
                    -2.286
                  ],
                  "end": [
                    0.0,
                    -4.572
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    0.0,
                    -4.572
                  ],
                  "end": [
                    3.959468146,
                    -2.286
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    3.959468146,
                    -2.286
                  ],
                  "end": [
                    3.959468146,
                    2.286
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    3.959468146,
                    2.286
                  ],
                  "end": [
                    -0.0,
                    4.572
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -0.0,
                    4.572
                  ],
                  "end": [
                    -3.959468146,
                    2.286
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -3.959468146,
                    2.286
                  ],
                  "end": [
                    -3.959468146,
                    -2.286
                  ]
                }
              ]
            },
            {
              "role": "inner",
              "closed": true,
              "segments": [
                {
                  "type": "circle",
                  "center": [
                    0.0,
                    -0.0
                  ],
                  "radius_mm": 4.572
                }
              ]
            }
          ],
          "construction": [
            {
              "type": "circle",
              "center": [
                0.0,
                -0.0
              ],
              "radius_mm": 4.572
            }
          ]
        }
      },
      {
        "id": "sk_013",
        "name": "Sketch26",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -500.0,
            707.106781187,
            -500.0
          ],
          "x_dir": [
            0.707106781,
            0.0,
            0.707106781
          ],
          "y_dir": [
            0.0,
            -1.0,
            0.0
          ],
          "normal": [
            0.707106781,
            0.0,
            -0.707106781
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "arc",
                  "start": [
                    62.3697,
                    0.0
                  ],
                  "end": [
                    60.4393,
                    0.0
                  ],
                  "center": [
                    61.4045,
                    0.0
                  ],
                  "radius_mm": 0.9652,
                  "clockwise": false
                },
                {
                  "type": "line",
                  "start": [
                    60.4393,
                    0.0
                  ],
                  "end": [
                    62.3697,
                    0.0
                  ]
                }
              ]
            }
          ]
        }
      }
    ]
  },
  "features": [
    {
      "id": "f_001",
      "name": "Front Plane",
      "atomic_id": "reference_plane",
      "depends_on": [],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            1.0,
            0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 10
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_002",
      "name": "Top Plane",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_001"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 10
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_003",
      "name": "Right Plane",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_002"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            1.0,
            0.0,
            0.0
          ],
          "x_dir": [
            0.0,
            1.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 10
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_004",
      "name": "Base",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_002"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -57.15
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 57.15,
        "angle_rad": 0.0,
        "reverse": true,
        "solidworks_type": 5,
        "references": [
          {
            "kind": "plane",
            "stable_id": "3a59788dcc6fc4588146380df745485f1125d10e3ba413489a3142d9f9beb78a",
            "source": "solidworks",
            "confidence": 1.0,
            "owner_feature_id": "f_002"
          }
        ]
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "plane",
          "stable_id": "3a59788dcc6fc4588146380df745485f1125d10e3ba413489a3142d9f9beb78a",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_002"
        }
      ]
    },
    {
      "id": "f_013",
      "name": "Lubercation Plane",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_002"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.78539816339745,
        "reverse": false,
        "solidworks_type": 7,
        "references": [
          {
            "kind": "plane",
            "stable_id": "3a59788dcc6fc4588146380df745485f1125d10e3ba413489a3142d9f9beb78a",
            "source": "solidworks",
            "confidence": 1.0,
            "owner_feature_id": "f_002"
          },
          {
            "kind": "feature",
            "stable_id": "60c7f5d6377056c5d92c78b4786a77b4059ec5c30b656d39e6d5f08637836268",
            "source": "solidworks",
            "confidence": 1.0
          },
          {
            "kind": "axis",
            "stable_id": "9e4cc81103c1d957e109bc56c946541b41deae801678caa096464279f1d5e89f",
            "source": "solidworks",
            "confidence": 1.0,
            "geometry": {
              "start": [
                0.0,
                -0.04499991,
                0.0
              ],
              "end": [
                0.0,
                0.04499991,
                0.0
              ]
            }
          }
        ]
      },
      "execution_status": "deferred",
      "sketch_id": "sk_005",
      "selectors": [
        {
          "kind": "plane",
          "stable_id": "3a59788dcc6fc4588146380df745485f1125d10e3ba413489a3142d9f9beb78a",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_002"
        },
        {
          "kind": "feature",
          "stable_id": "60c7f5d6377056c5d92c78b4786a77b4059ec5c30b656d39e6d5f08637836268",
          "source": "solidworks",
          "confidence": 1.0
        },
        {
          "kind": "axis",
          "stable_id": "9e4cc81103c1d957e109bc56c946541b41deae801678caa096464279f1d5e89f",
          "source": "solidworks",
          "confidence": 1.0,
          "geometry": {
            "start": [
              0.0,
              -0.04499991,
              0.0
            ],
            "end": [
              0.0,
              0.04499991,
              0.0
            ]
          }
        }
      ]
    },
    {
      "id": "f_005",
      "name": "Housing Foot",
      "atomic_id": "extrude_add_blind",
      "depends_on": [
        "f_004"
      ],
      "params": {
        "distance_mm": 22.225,
        "reverse": false,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_002",
      "unresolved": [
        "missing source sketch parent"
      ]
    },
    {
      "id": "f_018",
      "name": "Plane9",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_013"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            0.0,
            0.707106781,
            0.707106781
          ],
          "y_dir": [
            0.5,
            -0.5,
            -0.707106781
          ],
          "normal": [
            -0.281084637,
            0.678598345,
            -0.678598345
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 1.5707963267949,
        "reverse": false,
        "solidworks_type": 7,
        "references": [
          {
            "kind": "feature",
            "stable_id": "7f916ad6b5e988453002a63ba5a21b80c54aa6c1a66b39bd391fcd61c2212e45",
            "source": "solidworks",
            "confidence": 1.0,
            "owner_feature_id": "f_013"
          },
          {
            "kind": "feature",
            "stable_id": "60c7f5d6377056c5d92c78b4786a77b4059ec5c30b656d39e6d5f08637836268",
            "source": "solidworks",
            "confidence": 1.0
          },
          {
            "kind": "axis",
            "stable_id": "9e4cc81103c1d957e109bc56c946541b41deae801678caa096464279f1d5e89f",
            "source": "solidworks",
            "confidence": 1.0,
            "geometry": {
              "start": [
                0.0,
                -0.04499991,
                0.0
              ],
              "end": [
                0.0,
                0.04499991,
                0.0
              ]
            }
          }
        ],
        "derived_from_sketch_id": "sk_011"
      },
      "execution_status": "deferred",
      "sketch_id": "sk_005",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "7f916ad6b5e988453002a63ba5a21b80c54aa6c1a66b39bd391fcd61c2212e45",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_013"
        },
        {
          "kind": "feature",
          "stable_id": "60c7f5d6377056c5d92c78b4786a77b4059ec5c30b656d39e6d5f08637836268",
          "source": "solidworks",
          "confidence": 1.0
        },
        {
          "kind": "axis",
          "stable_id": "9e4cc81103c1d957e109bc56c946541b41deae801678caa096464279f1d5e89f",
          "source": "solidworks",
          "confidence": 1.0,
          "geometry": {
            "start": [
              0.0,
              -0.04499991,
              0.0
            ],
            "end": [
              0.0,
              0.04499991,
              0.0
            ]
          }
        }
      ]
    },
    {
      "id": "f_006",
      "name": "Housing Support",
      "atomic_id": "extrude_add_two_sided",
      "depends_on": [
        "f_001",
        "f_005",
        "f_004"
      ],
      "params": {
        "distance_mm": 0.0,
        "reverse": false,
        "end_condition": {
          "type": "up_to_surface",
          "solidworks_code": 4,
          "reference": {
            "kind": "face",
            "stable_id": "ffeaae98a7c5c0e12b9d348a5ba5e6a4d7af355c5c1912676c4b9a564d3d07e2",
            "source": "solidworks",
            "confidence": 1.0,
            "geometry": {
              "surface": {
                "type": "plane",
                "parameters": [
                  0.0,
                  0.0,
                  -1.0,
                  0.10318750000000003,
                  -0.034925,
                  0.0301625
                ]
              },
              "box": [
                -0.10318749999999997,
                -0.05715,
                0.0301625,
                0.10318750000000003,
                -0.034925,
                0.0301625
              ],
              "area": 0.004586684375
            }
          }
        },
        "reverse_distance_mm": 0.0,
        "reverse_end_condition": {
          "type": "up_to_surface",
          "solidworks_code": 4,
          "reference": {
            "kind": "face",
            "stable_id": "372b70b674ae5741c288b80c6a56639bf2e65d790bcf4c9697aacc63e9310540",
            "source": "solidworks",
            "confidence": 1.0,
            "geometry": {
              "surface": {
                "type": "plane",
                "parameters": [
                  0.0,
                  0.0,
                  1.0,
                  0.10318750000000002,
                  -0.034925,
                  -0.030162499999999995
                ]
              },
              "box": [
                -0.10318749999999999,
                -0.05715,
                -0.030162499999999995,
                0.10318750000000002,
                -0.034925,
                -0.030162499999999995
              ],
              "area": 0.004586684375
            }
          }
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_003",
      "unresolved": [
        "missing source sketch parent"
      ]
    },
    {
      "id": "f_009",
      "name": "Bearing Hole",
      "atomic_id": "revolve_cut",
      "depends_on": [
        "f_002",
        "f_005"
      ],
      "params": {
        "angle_deg": 360.0,
        "axis": {
          "origin_mm": [
            0.0,
            -44.99991,
            0.0
          ],
          "direction": [
            0.0,
            1.0,
            0.0
          ]
        },
        "reverse": false,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_005",
      "selectors": [
        {
          "kind": "axis",
          "stable_id": "9e4cc81103c1d957e109bc56c946541b41deae801678caa096464279f1d5e89f",
          "source": "solidworks",
          "confidence": 1.0,
          "geometry": {
            "start": [
              0.0,
              -0.04499991,
              0.0
            ],
            "end": [
              0.0,
              0.04499991,
              0.0
            ]
          }
        }
      ]
    },
    {
      "id": "f_010",
      "name": "Bolt Slot",
      "atomic_id": "extrude_cut_blind",
      "depends_on": [
        "f_005",
        "f_001"
      ],
      "params": {
        "distance_mm": 0.0,
        "reverse": false,
        "end_condition": {
          "type": "up_to_surface",
          "solidworks_code": 4
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_006"
    },
    {
      "id": "f_012",
      "name": "Housing Base Cut",
      "atomic_id": "extrude_cut_blind",
      "depends_on": [
        "f_005"
      ],
      "params": {
        "distance_mm": 3.175,
        "reverse": false,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_008"
    },
    {
      "id": "f_022",
      "name": "Fillet1",
      "atomic_id": "fillet",
      "depends_on": [
        "f_005"
      ],
      "params": {
        "radius_mm": 6.35,
        "tangent_propagation": false
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_024",
      "name": "Fillet3",
      "atomic_id": "fillet",
      "depends_on": [
        "f_005"
      ],
      "params": {
        "radius_mm": 1.5875,
        "tangent_propagation": false
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_007",
      "name": "Housing Taper",
      "atomic_id": "extrude_cut_blind",
      "depends_on": [
        "f_003",
        "f_005",
        "f_006"
      ],
      "params": {
        "distance_mm": 0.0,
        "reverse": false,
        "end_condition": {
          "type": "through_all",
          "solidworks_code": 1
        },
        "reverse_distance_mm": 0.0,
        "reverse_end_condition": {
          "type": "through_all",
          "solidworks_code": 1
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_004"
    },
    {
      "id": "f_011",
      "name": "Bolt Clearence",
      "atomic_id": "extrude_cut_blind",
      "depends_on": [
        "f_005",
        "f_006",
        "f_010"
      ],
      "params": {
        "distance_mm": 0.0,
        "reverse": true,
        "end_condition": {
          "type": "through_all",
          "solidworks_code": 1
        }
      },
      "execution_status": "supported",
      "sketch_id": "sk_007"
    },
    {
      "id": "f_014",
      "name": "Lubercation Hole",
      "atomic_id": "extrude_cut_blind",
      "depends_on": [
        "f_013",
        "f_006",
        "f_005"
      ],
      "params": {
        "distance_mm": 0.0,
        "reverse": true,
        "end_condition": {
          "type": "up_to_surface",
          "solidworks_code": 4
        }
      },
      "execution_status": "supported",
      "sketch_id": "sk_009"
    },
    {
      "id": "f_015",
      "name": "Chamfer1",
      "atomic_id": "chamfer",
      "depends_on": [
        "f_012",
        "f_005"
      ],
      "params": {
        "distance_mm": 1.5875,
        "angle_rad": 0.78539816339745
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_016",
      "name": "Housing Bearing Cutout",
      "atomic_id": "extrude_cut_blind",
      "depends_on": [
        "f_005",
        "f_012"
      ],
      "params": {
        "distance_mm": 6.35,
        "reverse": false,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_010"
    },
    {
      "id": "f_008",
      "name": "Tapper mirror",
      "atomic_id": "pattern_mirror",
      "depends_on": [
        "f_007",
        "f_001"
      ],
      "params": {
        "source_feature_ids": [
          "f_007"
        ],
        "mirror_plane": {
          "unresolved": "mirror plane was not captured"
        }
      },
      "execution_status": "deferred",
      "unresolved": [
        "mirror pattern source features or plane were not captured"
      ]
    },
    {
      "id": "f_017",
      "name": "Mirror3",
      "atomic_id": "pattern_mirror",
      "depends_on": [
        "f_016",
        "f_001"
      ],
      "params": {
        "source_feature_ids": [
          "f_016"
        ],
        "mirror_plane": {
          "unresolved": "mirror plane was not captured"
        }
      },
      "execution_status": "deferred",
      "unresolved": [
        "mirror pattern source features or plane were not captured"
      ]
    },
    {
      "id": "f_019",
      "name": "Zerk",
      "atomic_id": "revolve_add",
      "depends_on": [
        "f_018",
        "f_006",
        "f_007"
      ],
      "params": {
        "angle_deg": 360.0,
        "axis": {
          "origin_mm": [
            -16.29974305,
            -5.732170746,
            0.0
          ],
          "direction": [
            0.0,
            1.0,
            0.0
          ]
        },
        "reverse": false,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_011",
      "selectors": [
        {
          "kind": "axis",
          "stable_id": "b3ffe3ce904422b049ee0d17f7d3a25d9378ea369cc5a67ed206482f88e93479",
          "source": "solidworks",
          "confidence": 1.0,
          "geometry": {
            "start": [
              -0.0162997430503236,
              -0.005732170746344967,
              0.0
            ],
            "end": [
              -0.0162997430503236,
              0.08501723724037902,
              0.0
            ]
          }
        }
      ]
    },
    {
      "id": "f_025",
      "name": "Fillet4",
      "atomic_id": "fillet",
      "depends_on": [
        "f_011"
      ],
      "params": {
        "radius_mm": 1.5875,
        "tangent_propagation": false
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_020",
      "name": "Hex",
      "atomic_id": "extrude_cut_blind",
      "depends_on": [
        "f_019"
      ],
      "params": {
        "distance_mm": 0.0,
        "reverse": false,
        "end_condition": {
          "type": "up_to_surface",
          "solidworks_code": 4
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_012"
    },
    {
      "id": "f_021",
      "name": "Ball",
      "atomic_id": "revolve_add",
      "depends_on": [
        "f_018",
        "f_019"
      ],
      "params": {
        "angle_deg": 360.0,
        "axis": {
          "origin_mm": [
            60.4393,
            0.0,
            0.0
          ],
          "direction": [
            1.0,
            0.0,
            0.0
          ]
        },
        "reverse": false,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_013",
      "selectors": [
        {
          "kind": "axis",
          "stable_id": "c14c9c9cb61fb5508ecf276454aae6428b2c059d9fda343b093ad18d80bb7ca2",
          "source": "solidworks",
          "confidence": 1.0,
          "geometry": {
            "start": [
              0.060439299999999974,
              0.0,
              0.0
            ],
            "end": [
              0.06236969999999997,
              0.0,
              0.0
            ]
          }
        }
      ]
    },
    {
      "id": "f_023",
      "name": "Fillet2",
      "atomic_id": "fillet",
      "depends_on": [
        "f_011",
        "f_006",
        "f_008",
        "f_007"
      ],
      "params": {
        "radius_mm": 1.5875,
        "tangent_propagation": false
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_026",
      "name": "Fillet5",
      "atomic_id": "fillet",
      "depends_on": [
        "f_017",
        "f_016"
      ],
      "params": {
        "radius_mm": 1.5875,
        "tangent_propagation": false
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_027",
      "name": "Fillet6",
      "atomic_id": "fillet",
      "depends_on": [
        "f_016",
        "f_009",
        "f_008",
        "f_017",
        "f_007"
      ],
      "params": {
        "radius_mm": 0.79375,
        "tangent_propagation": false
      },
      "execution_status": "deferred"
    }
  ],
  "meta": {
    "unit": "mm",
    "source": "02_传动件/0203_轴承/020399_通用轴承/标准_Bearing Housing.solidworks_evidence_v2.json",
    "source_schema": "solidworks.cad_evidence.v2",
    "source_status": "hybrid_semantic_surfaceir_pending",
    "document_truth": {
      "mass_properties": {
        "available": true,
        "mass": 2.6578239680182074,
        "volume": 0.0003407466625664368,
        "surface_area": 0.06165257346521653,
        "center_of_mass": [
          -4.151225569133952e-06,
          -0.025940000561616414,
          -7.620950545363222e-08
        ],
        "principal_moments": [
          0.003170061279269403,
          0.009183647470127867,
          0.010968993695854102
        ],
        "principal_axes": null,
        "moment_of_inertia": null
      },
      "geometry": {
        "bounding_box": [
          -0.10318749999999999,
          -0.057150000000000006,
          -0.031137954535801912,
          0.10318750000000004,
          0.05556249999999999,
          0.03113795453580194
        ],
        "solid_body_count": 3,
        "bodies": [
          {
            "kind": "body",
            "dotnet_type": "System.__ComObject",
            "name": "Hex",
            "persist_reference_base64": "UEYAAAQAAAD//v8AAAAAAAIAAAB+AAAAfQAAAA==",
            "persist_reference_sha256": "20643ef02737dec13dc72625ebcc530d6481c6e47f8ee10811dfbe939fe2249b",
            "component": null,
            "geometry": {
              "box": [
                0.03524750527519664,
                0.035247505275196225,
                -0.003959468146102459,
                0.04530539213079409,
                0.045305392130793626,
                0.003959468146102444
              ],
              "face_count": 15,
              "edge_count": 25,
              "vertex_count": 12
            },
            "stable_id": "20643ef02737dec13dc72625ebcc530d6481c6e47f8ee10811dfbe939fe2249b"
          },
          {
            "kind": "body",
            "dotnet_type": "System.__ComObject",
            "name": "Fillet6",
            "persist_reference_base64": "UEYAAAQAAAD//v8AAAAAAAsAAAB8AAAAcwAAAHEAAAByAAAAcAAAAG8AAABuAAAAbQAAAGwAAABrAAAAagAAAA==",
            "persist_reference_sha256": "2e086546c6db01c40da1e46ae8f03284a637b7dc5d1b5aec07dee648286fd625",
            "component": null,
            "geometry": {
              "box": [
                -0.10318749999999999,
                -0.05715,
                -0.031137954535801912,
                0.10318750000000003,
                0.05556249999999999,
                0.031137954535801936
              ],
              "face_count": 112,
              "edge_count": 276,
              "vertex_count": 164
            },
            "stable_id": "2e086546c6db01c40da1e46ae8f03284a637b7dc5d1b5aec07dee648286fd625"
          },
          {
            "kind": "body",
            "dotnet_type": "System.__ComObject",
            "name": "Ball",
            "persist_reference_base64": "UEYAAAQAAAD//v8AAAAAAAEAAAB/AAAA",
            "persist_reference_sha256": "ef22e9959325241c3cedfcb171a8b8b14c84d7778b680c629b70ad97618e6690",
            "component": null,
            "geometry": {
              "box": [
                0.04245433834536957,
                0.0424543383453691,
                -0.0009651999999999999,
                0.044384738345369566,
                0.0443847383453691,
                0.0009651999999999999
              ],
              "face_count": 1,
              "edge_count": 0,
              "vertex_count": 0
            },
            "stable_id": "ef22e9959325241c3cedfcb171a8b8b14c84d7778b680c629b70ad97618e6690"
          }
        ]
      }
    },
    "step_inference": {
      "available": true,
      "face_count": 152,
      "surface_counts": {
        "bspline": 29,
        "cone": 6,
        "cylinder": 41,
        "plane": 42,
        "sphere": 8,
        "torus": 26
      },
      "axis_count": 47,
      "repeat_spacings_mm": [
        {
          "spacing_mm": 179.1296,
          "pair_count": 4
        },
        {
          "spacing_mm": 42.4582,
          "pair_count": 4
        },
        {
          "spacing_mm": 181.457,
          "pair_count": 4
        },
        {
          "spacing_mm": 41.4673,
          "pair_count": 4
        },
        {
          "spacing_mm": 176.6343,
          "pair_count": 4
        },
        {
          "spacing_mm": 30.2485,
          "pair_count": 4
        },
        {
          "spacing_mm": 8.0947,
          "pair_count": 4
        },
        {
          "spacing_mm": 47.4075,
          "pair_count": 3
        },
        {
          "spacing_mm": 121.1808,
          "pair_count": 3
        },
        {
          "spacing_mm": 49.3568,
          "pair_count": 3
        },
        {
          "spacing_mm": 123.4998,
          "pair_count": 3
        },
        {
          "spacing_mm": 61.6897,
          "pair_count": 3
        }
      ],
      "metrics": {
        "bounding_box_mm": [
          -103.1875,
          -57.15,
          -30.1625001,
          103.1875,
          55.5625001,
          30.1625001
        ],
        "volume_mm3": 340753.375417078,
        "surface_area_mm2": 61652.465458339,
        "solid_count": 3,
        "face_count": 152,
        "edge_count": 375,
        "vertex_count": 230
      },
      "error": null,
      "truth_comparison": {
        "expected_from_evidence": {
          "bounding_box_mm": [
            -103.1875,
            -57.15,
            -31.137954536,
            103.1875,
            55.5625,
            31.137954536
          ],
          "volume_mm3": 340746.662566437,
          "surface_area_mm2": 61652.573465217,
          "solid_count": 3,
          "face_count": 128,
          "edge_count": 301,
          "vertex_count": 176
        },
        "comparisons": {
          "volume_mm3": {
            "expected": 340746.662566437,
            "actual": 340753.375417078,
            "absolute_delta": 6.712850640993565,
            "within_tolerance": true
          },
          "surface_area_mm2": {
            "expected": 61652.573465217,
            "actual": 61652.465458339,
            "absolute_delta": 0.1080068779992871,
            "within_tolerance": true
          },
          "bounding_box_mm": {
            "expected": [
              -103.1875,
              -57.15,
              -31.137954536,
              103.1875,
              55.5625,
              31.137954536
            ],
            "actual": [
              -103.1875,
              -57.15,
              -30.1625001,
              103.1875,
              55.5625001,
              30.1625001
            ],
            "max_absolute_delta": 0.9754544359999997,
            "within_tolerance": false
          },
          "solid_count": {
            "expected": 3,
            "actual": 3,
            "matches": true
          },
          "face_count": {
            "expected": 128,
            "actual": 152,
            "matches": false
          },
          "edge_count": {
            "expected": 301,
            "actual": 375,
            "matches": false
          },
          "vertex_count": {
            "expected": 176,
            "actual": 230,
            "matches": false
          }
        },
        "numeric_geometry_match": false,
        "topology_counts_match": false
      }
    },
    "source_has_modeling_features": true
  }
}