{
  "schema": "cad.cdsl.llm.v1",
  "schema_version": "1.1.0",
  "kind": "part",
  "part_id": "039619",
  "geometry": {
    "sketches": [
      {
        "id": "sk_001",
        "name": "原点",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": []
        }
      },
      {
        "id": "sk_002",
        "name": "草图1",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    -20.0,
                    4.0
                  ],
                  "end": [
                    -16.0,
                    0.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -16.0,
                    0.0
                  ],
                  "end": [
                    -4.0,
                    0.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -4.0,
                    0.0
                  ],
                  "end": [
                    0.0,
                    4.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    0.0,
                    4.0
                  ],
                  "end": [
                    0.0,
                    45.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    0.0,
                    45.0
                  ],
                  "end": [
                    -16.0,
                    45.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -16.0,
                    45.0
                  ],
                  "end": [
                    -16.0,
                    19.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -16.0,
                    19.0
                  ],
                  "end": [
                    -20.0,
                    15.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -20.0,
                    15.0
                  ],
                  "end": [
                    -20.0,
                    4.0
                  ]
                }
              ]
            }
          ]
        }
      },
      {
        "id": "sk_003",
        "name": "草图2",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            0.0,
            0.0,
            1.0
          ],
          "y_dir": [
            0.707106781,
            0.0,
            -0.707106781
          ],
          "normal": [
            -0.0,
            1.0,
            0.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    -24.5,
                    10.0
                  ],
                  "end": [
                    -24.5,
                    16.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -24.5,
                    16.0
                  ],
                  "end": [
                    0.733,
                    16.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    0.733,
                    16.0
                  ],
                  "end": [
                    1.5,
                    15.233
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    1.5,
                    15.233
                  ],
                  "end": [
                    1.5,
                    14.45
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    1.5,
                    14.45
                  ],
                  "end": [
                    3.0,
                    14.45
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    3.0,
                    14.45
                  ],
                  "end": [
                    3.0,
                    10.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    3.0,
                    10.0
                  ],
                  "end": [
                    -24.5,
                    10.0
                  ]
                }
              ]
            }
          ],
          "construction": [
            {
              "type": "line",
              "start": [
                3.0,
                10.0
              ],
              "end": [
                -24.5,
                10.0
              ]
            }
          ]
        }
      },
      {
        "id": "sk_004",
        "name": "草图3",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            13.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "circle",
          "center": [
            -10.0,
            10.0
          ],
          "radius_mm": 13.5
        }
      },
      {
        "id": "sk_005",
        "name": "草图4",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            13.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    -19.815,
                    10.0
                  ],
                  "end": [
                    -14.9075,
                    1.499960662
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -14.9075,
                    1.499960662
                  ],
                  "end": [
                    -5.0925,
                    1.499960662
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -5.0925,
                    1.499960662
                  ],
                  "end": [
                    -0.185,
                    10.0
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -0.185,
                    10.0
                  ],
                  "end": [
                    -5.0925,
                    18.500039338
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -5.0925,
                    18.500039338
                  ],
                  "end": [
                    -14.9075,
                    18.500039338
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -14.9075,
                    18.500039338
                  ],
                  "end": [
                    -19.815,
                    10.0
                  ]
                }
              ]
            },
            {
              "role": "inner",
              "closed": true,
              "segments": [
                {
                  "type": "circle",
                  "center": [
                    -10.0,
                    10.0
                  ],
                  "radius_mm": 13.5
                }
              ]
            }
          ]
        }
      },
      {
        "id": "sk_006",
        "name": "草图5",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            24.5,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    -13.0,
                    11.732050808
                  ],
                  "end": [
                    -13.0,
                    8.267949192
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -13.0,
                    8.267949192
                  ],
                  "end": [
                    -10.0,
                    6.535898385
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -10.0,
                    6.535898385
                  ],
                  "end": [
                    -7.0,
                    8.267949192
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -7.0,
                    8.267949192
                  ],
                  "end": [
                    -7.0,
                    11.732050808
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -7.0,
                    11.732050808
                  ],
                  "end": [
                    -10.0,
                    13.464101615
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -10.0,
                    13.464101615
                  ],
                  "end": [
                    -13.0,
                    11.732050808
                  ]
                }
              ]
            }
          ]
        }
      },
      {
        "id": "sk_007",
        "name": "草图6",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            0.0,
            0.0,
            1.0
          ],
          "y_dir": [
            0.707106781,
            0.0,
            -0.707106781
          ],
          "normal": [
            -0.0,
            1.0,
            0.0
          ]
        },
        "profile": {
          "type": "circle",
          "center": [
            -6.5,
            39.0
          ],
          "radius_mm": 5.25
        }
      },
      {
        "id": "sk_008",
        "name": "草图7",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            0.0,
            0.0,
            1.0
          ],
          "y_dir": [
            0.707106781,
            0.0,
            -0.707106781
          ],
          "normal": [
            -0.0,
            1.0,
            0.0
          ]
        },
        "profile": {
          "type": "circle",
          "center": [
            -6.5,
            25.5
          ],
          "radius_mm": 5.25
        }
      },
      {
        "id": "sk_009",
        "name": "草图8",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            1000.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            0.0,
            1.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    -0.5,
                    -6.5
                  ],
                  "end": [
                    -0.5,
                    -10.9
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -0.5,
                    -10.9
                  ],
                  "end": [
                    -1.1,
                    -11.5
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -1.1,
                    -11.5
                  ],
                  "end": [
                    -6.5,
                    -11.5
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -6.5,
                    -11.5
                  ],
                  "end": [
                    -6.5,
                    -6.5
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -6.5,
                    -6.5
                  ],
                  "end": [
                    -0.5,
                    -6.5
                  ]
                }
              ]
            }
          ],
          "construction": [
            {
              "type": "line",
              "start": [
                -6.5,
                -6.5
              ],
              "end": [
                -0.5,
                -6.5
              ]
            }
          ]
        }
      },
      {
        "id": "sk_010",
        "name": "草图9",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            1000.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            0.0,
            1.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    -0.5,
                    -6.5
                  ],
                  "end": [
                    -0.5,
                    -10.9
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -0.5,
                    -10.9
                  ],
                  "end": [
                    -1.1,
                    -11.5
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -1.1,
                    -11.5
                  ],
                  "end": [
                    -6.5,
                    -11.5
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -6.5,
                    -11.5
                  ],
                  "end": [
                    -6.5,
                    -6.5
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -6.5,
                    -6.5
                  ],
                  "end": [
                    -0.5,
                    -6.5
                  ]
                }
              ]
            }
          ],
          "construction": [
            {
              "type": "line",
              "start": [
                -6.5,
                -6.5
              ],
              "end": [
                -0.5,
                -6.5
              ]
            }
          ]
        }
      },
      {
        "id": "sk_011",
        "name": "草图10",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            0.0,
            0.0,
            1.0
          ],
          "y_dir": [
            0.707106781,
            0.0,
            -0.707106781
          ],
          "normal": [
            -0.0,
            1.0,
            0.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    -9.0,
                    40.443375673
                  ],
                  "end": [
                    -9.0,
                    37.556624327
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -9.0,
                    37.556624327
                  ],
                  "end": [
                    -6.5,
                    36.113248654
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -6.5,
                    36.113248654
                  ],
                  "end": [
                    -4.0,
                    37.556624327
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -4.0,
                    37.556624327
                  ],
                  "end": [
                    -4.0,
                    40.443375673
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -4.0,
                    40.443375673
                  ],
                  "end": [
                    -6.5,
                    41.886751346
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -6.5,
                    41.886751346
                  ],
                  "end": [
                    -9.0,
                    40.443375673
                  ]
                }
              ]
            }
          ]
        }
      },
      {
        "id": "sk_012",
        "name": "草图11",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            0.0,
            0.0,
            1.0
          ],
          "y_dir": [
            0.707106781,
            0.0,
            -0.707106781
          ],
          "normal": [
            -0.0,
            1.0,
            0.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": [
            {
              "role": "outer",
              "closed": true,
              "segments": [
                {
                  "type": "line",
                  "start": [
                    -9.0,
                    26.943375673
                  ],
                  "end": [
                    -9.0,
                    24.056624327
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -9.0,
                    24.056624327
                  ],
                  "end": [
                    -6.5,
                    22.613248654
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -6.5,
                    22.613248654
                  ],
                  "end": [
                    -4.0,
                    24.056624327
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -4.0,
                    24.056624327
                  ],
                  "end": [
                    -4.0,
                    26.943375673
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -4.0,
                    26.943375673
                  ],
                  "end": [
                    -6.5,
                    28.386751346
                  ]
                },
                {
                  "type": "line",
                  "start": [
                    -6.5,
                    28.386751346
                  ],
                  "end": [
                    -9.0,
                    26.943375673
                  ]
                }
              ]
            }
          ]
        }
      },
      {
        "id": "sk_013",
        "name": "AS",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": []
        }
      },
      {
        "id": "sk_014",
        "name": "AS2",
        "role": "profile",
        "workplane": {
          "origin_mm": [
            -0.0,
            -0.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            1.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "profile": {
          "type": "analytic_contours",
          "contours": []
        }
      }
    ]
  },
  "features": [
    {
      "id": "f_001",
      "name": "前视基准面",
      "atomic_id": "reference_plane",
      "depends_on": [],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            1.0,
            0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 10
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_002",
      "name": "上视基准面",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_001"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 10
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_004",
      "name": "凸台-拉伸1",
      "atomic_id": "extrude_add_blind",
      "depends_on": [
        "f_001"
      ],
      "params": {
        "distance_mm": 13.0,
        "reverse": false,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        },
        "reverse_distance_mm": 13.0,
        "reverse_end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_002"
    },
    {
      "id": "f_007",
      "name": "基准面5",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_001"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            13.0,
            0.0
          ],
          "normal": [
            0.0,
            1.0,
            0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 13.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 5,
        "references": [
          {
            "kind": "plane",
            "stable_id": "46665b39295d4001bcbef6f37ec0c75c219ac67a07e32a964234a868b3672da2",
            "source": "solidworks",
            "confidence": 1.0,
            "owner_feature_id": "f_001"
          }
        ]
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "plane",
          "stable_id": "46665b39295d4001bcbef6f37ec0c75c219ac67a07e32a964234a868b3672da2",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_001"
        }
      ]
    },
    {
      "id": "f_010",
      "name": "基准面6",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_001"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            24.5,
            0.0
          ],
          "normal": [
            0.0,
            1.0,
            0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 24.5,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 5,
        "references": [
          {
            "kind": "plane",
            "stable_id": "46665b39295d4001bcbef6f37ec0c75c219ac67a07e32a964234a868b3672da2",
            "source": "solidworks",
            "confidence": 1.0,
            "owner_feature_id": "f_001"
          }
        ]
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "plane",
          "stable_id": "46665b39295d4001bcbef6f37ec0c75c219ac67a07e32a964234a868b3672da2",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_001"
        }
      ]
    },
    {
      "id": "f_015",
      "name": "基准面10",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_001"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            25.5,
            0.0
          ],
          "normal": [
            0.0,
            1.0,
            0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 25.5,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 5,
        "references": [
          {
            "kind": "plane",
            "stable_id": "46665b39295d4001bcbef6f37ec0c75c219ac67a07e32a964234a868b3672da2",
            "source": "solidworks",
            "confidence": 1.0,
            "owner_feature_id": "f_001"
          }
        ]
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "plane",
          "stable_id": "46665b39295d4001bcbef6f37ec0c75c219ac67a07e32a964234a868b3672da2",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_001"
        }
      ]
    },
    {
      "id": "f_003",
      "name": "右视基准面",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_002"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            1.0,
            0.0,
            0.0
          ],
          "x_dir": [
            0.0,
            1.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 10
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_008",
      "name": "凸台-拉伸2",
      "atomic_id": "extrude_add_blind",
      "depends_on": [
        "f_007",
        "f_004"
      ],
      "params": {
        "distance_mm": 5.0,
        "reverse": false,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "supported",
      "sketch_id": "sk_004"
    },
    {
      "id": "f_009",
      "name": "切除-拉伸1",
      "atomic_id": "extrude_cut_blind",
      "depends_on": [
        "f_007",
        "f_004"
      ],
      "params": {
        "distance_mm": 5.0,
        "reverse": true,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_005"
    },
    {
      "id": "f_011",
      "name": "切除-拉伸2",
      "atomic_id": "extrude_cut_blind",
      "depends_on": [
        "f_010",
        "f_004"
      ],
      "params": {
        "distance_mm": 6.0,
        "reverse": false,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_006"
    },
    {
      "id": "f_018",
      "name": "基准面11",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_002"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            39.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 39.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 5,
        "references": [
          {
            "kind": "plane",
            "stable_id": "3a59788dcc6fc4588146380df745485f1125d10e3ba413489a3142d9f9beb78a",
            "source": "solidworks",
            "confidence": 1.0,
            "owner_feature_id": "f_002"
          }
        ]
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "plane",
          "stable_id": "3a59788dcc6fc4588146380df745485f1125d10e3ba413489a3142d9f9beb78a",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_002"
        }
      ]
    },
    {
      "id": "f_005",
      "name": "基准面4",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_003"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            -10.0,
            -0.0,
            -0.0
          ],
          "normal": [
            1.0,
            0.0,
            0.0
          ],
          "x_dir": [
            0.0,
            1.0,
            0.0
          ]
        },
        "offset_mm": 10.0,
        "angle_rad": 0.0,
        "reverse": true,
        "solidworks_type": 5,
        "references": [
          {
            "kind": "plane",
            "stable_id": "deb6d30555812398da6cd3fc22d11f9b466e167f3f31b37e2945d405c3755631",
            "source": "solidworks",
            "confidence": 1.0,
            "owner_feature_id": "f_003"
          }
        ]
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "plane",
          "stable_id": "deb6d30555812398da6cd3fc22d11f9b466e167f3f31b37e2945d405c3755631",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_003"
        }
      ]
    },
    {
      "id": "f_012",
      "name": "基准面7",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_003"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            -20.0,
            -0.0,
            -0.0
          ],
          "normal": [
            1.0,
            0.0,
            0.0
          ],
          "x_dir": [
            0.0,
            1.0,
            0.0
          ]
        },
        "offset_mm": 20.0,
        "angle_rad": 0.0,
        "reverse": true,
        "solidworks_type": 5,
        "references": [
          {
            "kind": "plane",
            "stable_id": "deb6d30555812398da6cd3fc22d11f9b466e167f3f31b37e2945d405c3755631",
            "source": "solidworks",
            "confidence": 1.0,
            "owner_feature_id": "f_003"
          }
        ]
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "plane",
          "stable_id": "deb6d30555812398da6cd3fc22d11f9b466e167f3f31b37e2945d405c3755631",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_003"
        }
      ]
    },
    {
      "id": "f_013",
      "name": "基准面8",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_003"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            -16.0,
            -0.0,
            -0.0
          ],
          "normal": [
            1.0,
            0.0,
            0.0
          ],
          "x_dir": [
            0.0,
            1.0,
            0.0
          ]
        },
        "offset_mm": 16.0,
        "angle_rad": 0.0,
        "reverse": true,
        "solidworks_type": 5,
        "references": [
          {
            "kind": "plane",
            "stable_id": "deb6d30555812398da6cd3fc22d11f9b466e167f3f31b37e2945d405c3755631",
            "source": "solidworks",
            "confidence": 1.0,
            "owner_feature_id": "f_003"
          }
        ]
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "plane",
          "stable_id": "deb6d30555812398da6cd3fc22d11f9b466e167f3f31b37e2945d405c3755631",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_003"
        }
      ]
    },
    {
      "id": "f_016",
      "name": "切除-拉伸3",
      "atomic_id": "extrude_cut_blind",
      "depends_on": [
        "f_003",
        "f_004"
      ],
      "params": {
        "distance_mm": 6.5,
        "reverse": false,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "supported",
      "sketch_id": "sk_007"
    },
    {
      "id": "f_017",
      "name": "切除-拉伸4",
      "atomic_id": "extrude_cut_blind",
      "depends_on": [
        "f_003",
        "f_004"
      ],
      "params": {
        "distance_mm": 6.5,
        "reverse": false,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "supported",
      "sketch_id": "sk_008"
    },
    {
      "id": "f_019",
      "name": "旋转2",
      "atomic_id": "revolve_add",
      "depends_on": [
        "f_018",
        "f_004"
      ],
      "params": {
        "angle_deg": 360.0,
        "axis": {
          "origin_mm": [
            -6.5,
            -6.5,
            0.0
          ],
          "direction": [
            1.0,
            0.0,
            0.0
          ]
        },
        "reverse": true,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_009",
      "selectors": [
        {
          "kind": "axis",
          "stable_id": "92c8fc5c7d569f2c843b8e69b06ebfa4ac4b3a2934cfae107726de9add7a5a32",
          "source": "solidworks",
          "confidence": 1.0,
          "geometry": {
            "start": [
              -0.006500000000000001,
              -0.006500000000000001,
              0.0
            ],
            "end": [
              -0.0005,
              -0.006500000000000001,
              0.0
            ]
          }
        }
      ]
    },
    {
      "id": "f_020",
      "name": "基准面12",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_018"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            -0.0,
            1000.0,
            -0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ],
          "y_dir": [
            0.0,
            1.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ]
        },
        "offset_mm": 13.5,
        "angle_rad": 0.0,
        "reverse": true,
        "solidworks_type": 5,
        "references": [
          {
            "kind": "feature",
            "stable_id": "533e47d766d905f64094d2ce36268b684f7aa91ef89d6fbe642f3a39690dcdab",
            "source": "solidworks",
            "confidence": 1.0,
            "owner_feature_id": "f_018"
          }
        ],
        "derived_from_sketch_id": "sk_010"
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "533e47d766d905f64094d2ce36268b684f7aa91ef89d6fbe642f3a39690dcdab",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_018"
        }
      ]
    },
    {
      "id": "f_022",
      "name": "基准面13",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_003"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            -0.5,
            -0.0,
            -0.0
          ],
          "normal": [
            1.0,
            0.0,
            0.0
          ],
          "x_dir": [
            0.0,
            1.0,
            0.0
          ]
        },
        "offset_mm": 0.5,
        "angle_rad": 0.0,
        "reverse": true,
        "solidworks_type": 5,
        "references": [
          {
            "kind": "plane",
            "stable_id": "deb6d30555812398da6cd3fc22d11f9b466e167f3f31b37e2945d405c3755631",
            "source": "solidworks",
            "confidence": 1.0,
            "owner_feature_id": "f_003"
          }
        ]
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "plane",
          "stable_id": "deb6d30555812398da6cd3fc22d11f9b466e167f3f31b37e2945d405c3755631",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_003"
        }
      ]
    },
    {
      "id": "f_006",
      "name": "旋转1",
      "atomic_id": "revolve_add",
      "depends_on": [
        "f_005",
        "f_004"
      ],
      "params": {
        "angle_deg": 360.0,
        "axis": {
          "origin_mm": [
            3.0,
            10.0,
            0.0
          ],
          "direction": [
            -1.0,
            0.0,
            0.0
          ]
        },
        "reverse": true,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_003",
      "selectors": [
        {
          "kind": "axis",
          "stable_id": "98f3a7efcc678fb3385563bf6a0c04c9fff7788739a6f628f036885a53c08d81",
          "source": "solidworks",
          "confidence": 1.0,
          "geometry": {
            "start": [
              0.003,
              0.01,
              0.0
            ],
            "end": [
              -0.0245,
              0.01,
              0.0
            ]
          }
        }
      ]
    },
    {
      "id": "f_014",
      "name": "基准面9",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_012"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            -4.0,
            0.0,
            0.0
          ],
          "normal": [
            1.0,
            0.0,
            0.0
          ],
          "x_dir": [
            0.0,
            1.0,
            0.0
          ]
        },
        "offset_mm": 16.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 5,
        "references": [
          {
            "kind": "feature",
            "stable_id": "312d3442137e0240c60af7e7165a30cecb088efa390045f3371635c1c1885a60",
            "source": "solidworks",
            "confidence": 1.0,
            "owner_feature_id": "f_012"
          }
        ],
        "derived_from_feature_id": "f_012",
        "plane_inference": "parent_reference_plane"
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "312d3442137e0240c60af7e7165a30cecb088efa390045f3371635c1c1885a60",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_012"
        }
      ]
    },
    {
      "id": "f_021",
      "name": "旋转3",
      "atomic_id": "revolve_add",
      "depends_on": [
        "f_020",
        "f_004"
      ],
      "params": {
        "angle_deg": 360.0,
        "axis": {
          "origin_mm": [
            -6.5,
            -6.5,
            0.0
          ],
          "direction": [
            1.0,
            0.0,
            0.0
          ]
        },
        "reverse": true,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_010",
      "selectors": [
        {
          "kind": "axis",
          "stable_id": "bdc85fb9dfc98575b624fe609f7e04cd4325416d9c956a012fd7203bd65d1a60",
          "source": "solidworks",
          "confidence": 1.0,
          "geometry": {
            "start": [
              -0.006500000000000001,
              -0.006500000000000001,
              0.0
            ],
            "end": [
              -0.0005,
              -0.006500000000000001,
              0.0
            ]
          }
        }
      ]
    },
    {
      "id": "f_023",
      "name": "切除-拉伸5",
      "atomic_id": "extrude_cut_blind",
      "depends_on": [
        "f_022",
        "f_004"
      ],
      "params": {
        "distance_mm": 3.0,
        "reverse": false,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_011"
    },
    {
      "id": "f_024",
      "name": "切除-拉伸6",
      "atomic_id": "extrude_cut_blind",
      "depends_on": [
        "f_022",
        "f_004"
      ],
      "params": {
        "distance_mm": 3.0,
        "reverse": false,
        "end_condition": {
          "type": "blind",
          "solidworks_code": 0
        }
      },
      "execution_status": "deferred",
      "sketch_id": "sk_012"
    },
    {
      "id": "f_025",
      "name": "基准面14",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_012"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            -19.5,
            0.0,
            0.0
          ],
          "normal": [
            1.0,
            0.0,
            0.0
          ],
          "x_dir": [
            0.0,
            1.0,
            0.0
          ]
        },
        "offset_mm": 0.5,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": 5,
        "references": [
          {
            "kind": "feature",
            "stable_id": "312d3442137e0240c60af7e7165a30cecb088efa390045f3371635c1c1885a60",
            "source": "solidworks",
            "confidence": 1.0,
            "owner_feature_id": "f_012"
          }
        ],
        "derived_from_feature_id": "f_012",
        "plane_inference": "parent_reference_plane"
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "312d3442137e0240c60af7e7165a30cecb088efa390045f3371635c1c1885a60",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_012"
        }
      ]
    },
    {
      "id": "f_026",
      "name": "AS XY",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_025"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": -1
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_027",
      "name": "AS XZ",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_026"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            1.0,
            0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": -1
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_028",
      "name": "AS YZ",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_027"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            1.0,
            0.0,
            0.0
          ],
          "x_dir": [
            0.0,
            1.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": -1
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_029",
      "name": "AS X",
      "atomic_id": "reference_axis",
      "depends_on": [
        "f_026",
        "f_027"
      ],
      "params": {
        "axis": {
          "selector": {
            "kind": "feature",
            "stable_id": "60c7f5d6377056c5d92c78b4786a77b4059ec5c30b656d39e6d5f08637836268",
            "source": "solidworks",
            "confidence": 1.0
          }
        }
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "60c7f5d6377056c5d92c78b4786a77b4059ec5c30b656d39e6d5f08637836268",
          "source": "solidworks",
          "confidence": 1.0
        },
        {
          "kind": "plane",
          "stable_id": "60c7f5d6377056c5d92c78b4786a77b4059ec5c30b656d39e6d5f08637836268",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_026"
        },
        {
          "kind": "plane",
          "stable_id": "b7184300b26bf5c0b83577ea3992d25214a418967acf252724adc525ee2d7ce6",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_027"
        }
      ]
    },
    {
      "id": "f_030",
      "name": "AS Y",
      "atomic_id": "reference_axis",
      "depends_on": [
        "f_026",
        "f_028"
      ],
      "params": {
        "axis": {
          "selector": {
            "kind": "feature",
            "stable_id": "60c7f5d6377056c5d92c78b4786a77b4059ec5c30b656d39e6d5f08637836268",
            "source": "solidworks",
            "confidence": 1.0
          }
        }
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "60c7f5d6377056c5d92c78b4786a77b4059ec5c30b656d39e6d5f08637836268",
          "source": "solidworks",
          "confidence": 1.0
        },
        {
          "kind": "plane",
          "stable_id": "60c7f5d6377056c5d92c78b4786a77b4059ec5c30b656d39e6d5f08637836268",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_026"
        },
        {
          "kind": "plane",
          "stable_id": "a97aab0c59f2caaf8a2db98cbe6194cc20618bd2ea09e9641d25ff21a5572f89",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_028"
        }
      ]
    },
    {
      "id": "f_031",
      "name": "AS Z",
      "atomic_id": "reference_axis",
      "depends_on": [
        "f_028",
        "f_027"
      ],
      "params": {
        "axis": {
          "selector": {
            "kind": "feature",
            "stable_id": "a97aab0c59f2caaf8a2db98cbe6194cc20618bd2ea09e9641d25ff21a5572f89",
            "source": "solidworks",
            "confidence": 1.0
          }
        }
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "a97aab0c59f2caaf8a2db98cbe6194cc20618bd2ea09e9641d25ff21a5572f89",
          "source": "solidworks",
          "confidence": 1.0
        },
        {
          "kind": "plane",
          "stable_id": "a97aab0c59f2caaf8a2db98cbe6194cc20618bd2ea09e9641d25ff21a5572f89",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_028"
        },
        {
          "kind": "plane",
          "stable_id": "b7184300b26bf5c0b83577ea3992d25214a418967acf252724adc525ee2d7ce6",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_027"
        }
      ]
    },
    {
      "id": "f_032",
      "name": "AS2 XY",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_031"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            0.0,
            1.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": -1
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_033",
      "name": "AS2 XZ",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_032"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            0.0,
            1.0,
            0.0
          ],
          "x_dir": [
            1.0,
            0.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": -1
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_034",
      "name": "AS2 YZ",
      "atomic_id": "reference_plane",
      "depends_on": [
        "f_033"
      ],
      "params": {
        "plane": {
          "origin_mm": [
            0.0,
            0.0,
            0.0
          ],
          "normal": [
            1.0,
            0.0,
            0.0
          ],
          "x_dir": [
            0.0,
            1.0,
            0.0
          ]
        },
        "offset_mm": 0.0,
        "angle_rad": 0.0,
        "reverse": false,
        "solidworks_type": -1
      },
      "execution_status": "deferred"
    },
    {
      "id": "f_035",
      "name": "AS2 X",
      "atomic_id": "reference_axis",
      "depends_on": [
        "f_032",
        "f_033"
      ],
      "params": {
        "axis": {
          "selector": {
            "kind": "feature",
            "stable_id": "9bd519d0281c64041b79b3fbf11f32c0719b22f6a42e73ed429151e87b8efb50",
            "source": "solidworks",
            "confidence": 1.0
          }
        }
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "9bd519d0281c64041b79b3fbf11f32c0719b22f6a42e73ed429151e87b8efb50",
          "source": "solidworks",
          "confidence": 1.0
        },
        {
          "kind": "plane",
          "stable_id": "9bd519d0281c64041b79b3fbf11f32c0719b22f6a42e73ed429151e87b8efb50",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_032"
        },
        {
          "kind": "plane",
          "stable_id": "113ab66a9152635f9df8b0aa710873bc8db4198c7529799c8085988cd72a1807",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_033"
        }
      ]
    },
    {
      "id": "f_036",
      "name": "AS2 Y",
      "atomic_id": "reference_axis",
      "depends_on": [
        "f_032",
        "f_034"
      ],
      "params": {
        "axis": {
          "selector": {
            "kind": "feature",
            "stable_id": "9bd519d0281c64041b79b3fbf11f32c0719b22f6a42e73ed429151e87b8efb50",
            "source": "solidworks",
            "confidence": 1.0
          }
        }
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "9bd519d0281c64041b79b3fbf11f32c0719b22f6a42e73ed429151e87b8efb50",
          "source": "solidworks",
          "confidence": 1.0
        },
        {
          "kind": "plane",
          "stable_id": "9bd519d0281c64041b79b3fbf11f32c0719b22f6a42e73ed429151e87b8efb50",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_032"
        },
        {
          "kind": "plane",
          "stable_id": "ee73a32063dd15bb6e154df6e7cd87873b9d0bafc3f81ceef7065bda4f40aef7",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_034"
        }
      ]
    },
    {
      "id": "f_037",
      "name": "AS2 Z",
      "atomic_id": "reference_axis",
      "depends_on": [
        "f_034",
        "f_033"
      ],
      "params": {
        "axis": {
          "selector": {
            "kind": "feature",
            "stable_id": "ee73a32063dd15bb6e154df6e7cd87873b9d0bafc3f81ceef7065bda4f40aef7",
            "source": "solidworks",
            "confidence": 1.0
          }
        }
      },
      "execution_status": "deferred",
      "selectors": [
        {
          "kind": "feature",
          "stable_id": "ee73a32063dd15bb6e154df6e7cd87873b9d0bafc3f81ceef7065bda4f40aef7",
          "source": "solidworks",
          "confidence": 1.0
        },
        {
          "kind": "plane",
          "stable_id": "ee73a32063dd15bb6e154df6e7cd87873b9d0bafc3f81ceef7065bda4f40aef7",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_034"
        },
        {
          "kind": "plane",
          "stable_id": "113ab66a9152635f9df8b0aa710873bc8db4198c7529799c8085988cd72a1807",
          "source": "solidworks",
          "confidence": 1.0,
          "owner_feature_id": "f_033"
        }
      ]
    }
  ],
  "meta": {
    "unit": "mm",
    "source": "039619.solidworks_evidence_v2.json",
    "source_schema": "solidworks.cad_evidence.v2",
    "source_status": "complete_with_blockers",
    "document_truth": {
      "mass_properties": {
        "available": true,
        "mass": 0.011763880822596077,
        "volume": 1.1763880822596077e-05,
        "surface_area": 0.004774325459447286,
        "center_of_mass": [
          -0.009226023067174698,
          0.019376440487374236,
          0.007973644532970607
        ],
        "principal_moments": [
          6.112552945937296e-07,
          2.170544067893635e-06,
          2.2309133435000153e-06
        ],
        "principal_axes": null,
        "moment_of_inertia": null
      },
      "geometry": {
        "bounding_box": [
          -0.02,
          0.0,
          -0.003,
          0.0,
          0.045,
          0.0245
        ],
        "solid_body_count": 1,
        "bodies": [
          {
            "kind": "body",
            "dotnet_type": "System.__ComObject",
            "name": "切除-拉伸6",
            "persist_reference_base64": "UEYAAAQAAAD//v8AAAAAAAsAAABvAAAAbgAAAG0AAABsAAAAawAAAGoAAABpAAAAaAAAAGcAAABmAAAAZQAAAA==",
            "persist_reference_sha256": "6f3fbffe16051e7f94186af45a3c1f02e52ae70ed8241b6c73a6327490e94aa2",
            "component": null,
            "geometry": {
              "box": [
                -0.02,
                0.0,
                -0.003,
                0.0,
                0.045,
                0.0245
              ],
              "face_count": 55,
              "edge_count": 113,
              "vertex_count": 64
            },
            "stable_id": "6f3fbffe16051e7f94186af45a3c1f02e52ae70ed8241b6c73a6327490e94aa2"
          }
        ]
      }
    },
    "step_inference": {
      "available": true,
      "face_count": 65,
      "surface_counts": {
        "cone": 6,
        "cylinder": 14,
        "plane": 45
      },
      "axis_count": 20,
      "repeat_spacings_mm": [
        {
          "spacing_mm": 5.4,
          "pair_count": 2
        },
        {
          "spacing_mm": 13.5,
          "pair_count": 2
        },
        {
          "spacing_mm": 14.5399,
          "pair_count": 2
        }
      ],
      "metrics": {
        "bounding_box_mm": [
          -20.0,
          0.0,
          -3.0,
          0.0,
          45.0,
          24.5
        ],
        "volume_mm3": 11763.880822596,
        "surface_area_mm2": 4774.325459447,
        "solid_count": 1,
        "face_count": 65,
        "edge_count": 150,
        "vertex_count": 98
      },
      "error": null,
      "truth_comparison": {
        "expected_from_evidence": {
          "bounding_box_mm": [
            -20.0,
            0.0,
            -3.0,
            0.0,
            45.0,
            24.5
          ],
          "volume_mm3": 11763.880822596,
          "surface_area_mm2": 4774.325459447,
          "solid_count": 1,
          "face_count": 55,
          "edge_count": 113,
          "vertex_count": 64
        },
        "comparisons": {
          "volume_mm3": {
            "expected": 11763.880822596,
            "actual": 11763.880822596,
            "absolute_delta": 0.0,
            "within_tolerance": true
          },
          "surface_area_mm2": {
            "expected": 4774.325459447,
            "actual": 4774.325459447,
            "absolute_delta": 0.0,
            "within_tolerance": true
          },
          "bounding_box_mm": {
            "expected": [
              -20.0,
              0.0,
              -3.0,
              0.0,
              45.0,
              24.5
            ],
            "actual": [
              -20.0,
              0.0,
              -3.0,
              0.0,
              45.0,
              24.5
            ],
            "max_absolute_delta": 0.0,
            "within_tolerance": true
          },
          "solid_count": {
            "expected": 1,
            "actual": 1,
            "matches": true
          },
          "face_count": {
            "expected": 55,
            "actual": 65,
            "matches": false
          },
          "edge_count": {
            "expected": 113,
            "actual": 150,
            "matches": false
          },
          "vertex_count": {
            "expected": 64,
            "actual": 98,
            "matches": false
          }
        },
        "numeric_geometry_match": true,
        "topology_counts_match": false
      }
    },
    "source_has_modeling_features": true
  }
}