{ "schema": "cad.cdsl.llm.v1", "schema_version": "1.1.0", "kind": "part", "part_id": "KUT2020L-820-200-B1_b", "geometry": { "sketches": [ { "id": "sk_001", "name": "Origin", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [] } }, { "id": "sk_002", "name": "Sketch1", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -97.5, 30.7 ], "end": [ -96.0, 30.7 ] }, { "type": "line", "start": [ -96.0, 30.7 ], "end": [ -96.0, 31.85 ] }, { "type": "line", "start": [ -96.0, 31.85 ], "end": [ -93.0, 31.85 ] }, { "type": "line", "start": [ -93.0, 31.85 ], "end": [ -93.0, 30.7 ] }, { "type": "line", "start": [ -93.0, 30.7 ], "end": [ -91.5, 30.7 ] }, { "type": "line", "start": [ -91.5, 30.7 ], "end": [ -91.5, 27.3 ] }, { "type": "line", "start": [ -91.5, 27.3 ], "end": [ -93.0, 27.3 ] }, { "type": "line", "start": [ -93.0, 27.3 ], "end": [ -93.0, 26.15 ] }, { "type": "line", "start": [ -93.0, 26.15 ], "end": [ -96.0, 26.15 ] }, { "type": "line", "start": [ -96.0, 26.15 ], "end": [ -96.0, 27.3 ] }, { "type": "line", "start": [ -96.0, 27.3 ], "end": [ -97.5, 27.3 ] }, { "type": "line", "start": [ -97.5, 27.3 ], "end": [ -97.5, 1.0 ] }, { "type": "line", "start": [ -97.5, 1.0 ], "end": [ -96.5, 0.0 ] }, { "type": "line", "start": [ -96.5, 0.0 ], "end": [ -45.0, 0.0 ] }, { "type": "line", "start": [ -45.0, 0.0 ], "end": [ -44.5, 0.5 ] }, { "type": "line", "start": [ -44.5, 0.5 ], "end": [ 44.5, 0.5 ] }, { "type": "line", "start": [ 44.5, 0.5 ], "end": [ 45.0, 0.0 ] }, { "type": "line", "start": [ 45.0, 0.0 ], "end": [ 96.5, 0.0 ] }, { "type": "line", "start": [ 96.5, 0.0 ], "end": [ 97.5, 1.0 ] }, { "type": "line", "start": [ 97.5, 1.0 ], "end": [ 97.5, 27.3 ] }, { "type": "line", "start": [ 97.5, 27.3 ], "end": [ 96.0, 27.3 ] }, { "type": "line", "start": [ 96.0, 27.3 ], "end": [ 96.0, 26.15 ] }, { "type": "line", "start": [ 96.0, 26.15 ], "end": [ 93.0, 26.15 ] }, { "type": "line", "start": [ 93.0, 26.15 ], "end": [ 93.0, 27.3 ] }, { "type": "line", "start": [ 93.0, 27.3 ], "end": [ 91.5, 27.3 ] }, { "type": "line", "start": [ 91.5, 27.3 ], "end": [ 91.5, 30.7 ] }, { "type": "line", "start": [ 91.5, 30.7 ], "end": [ 93.0, 30.7 ] }, { "type": "line", "start": [ 93.0, 30.7 ], "end": [ 93.0, 31.85 ] }, { "type": "line", "start": [ 93.0, 31.85 ], "end": [ 96.0, 31.85 ] }, { "type": "line", "start": [ 96.0, 31.85 ], "end": [ 96.0, 30.7 ] }, { "type": "line", "start": [ 96.0, 30.7 ], "end": [ 97.5, 30.7 ] }, { "type": "line", "start": [ 97.5, 30.7 ], "end": [ 97.5, 38.0 ] }, { "type": "line", "start": [ 97.5, 38.0 ], "end": [ 96.5, 39.0 ] }, { "type": "line", "start": [ 96.5, 39.0 ], "end": [ 58.0, 39.0 ] }, { "type": "line", "start": [ 58.0, 39.0 ], "end": [ 58.0, 12.0 ] }, { "type": "line", "start": [ 58.0, 12.0 ], "end": [ -58.0, 12.0 ] }, { "type": "line", "start": [ -58.0, 12.0 ], "end": [ -58.0, 39.0 ] }, { "type": "line", "start": [ -58.0, 39.0 ], "end": [ -96.5, 39.0 ] }, { "type": "line", "start": [ -96.5, 39.0 ], "end": [ -97.5, 38.0 ] }, { "type": "line", "start": [ -97.5, 38.0 ], "end": [ -97.5, 30.7 ] } ] } ] } }, { "id": "sk_003", "name": "Sketch2", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -820.0, -195.0 ], "end": [ 820.0, -195.0 ] }, { "type": "line", "start": [ 820.0, -195.0 ], "end": [ 820.0, 195.0 ] }, { "type": "line", "start": [ 820.0, 195.0 ], "end": [ -820.0, 195.0 ] }, { "type": "line", "start": [ -820.0, 195.0 ], "end": [ -820.0, -195.0 ] } ] }, { "role": "inner", "closed": true, "segments": [ { "type": "line", "start": [ -410.0, -95.5 ], "end": [ -408.0, -97.5 ] }, { "type": "line", "start": [ -408.0, -97.5 ], "end": [ 408.0, -97.5 ] }, { "type": "line", "start": [ 408.0, -97.5 ], "end": [ 410.0, -95.5 ] }, { "type": "line", "start": [ 410.0, -95.5 ], "end": [ 410.0, 95.5 ] }, { "type": "line", "start": [ 410.0, 95.5 ], "end": [ 408.0, 97.5 ] }, { "type": "line", "start": [ 408.0, 97.5 ], "end": [ -408.0, 97.5 ] }, { "type": "line", "start": [ -408.0, 97.5 ], "end": [ -410.0, 95.5 ] }, { "type": "line", "start": [ -410.0, 95.5 ], "end": [ -410.0, -95.5 ] } ] } ] } }, { "id": "sk_004", "name": "Sketch3", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "arc", "start": [ -386.0, -30.0 ], "end": [ -377.0, -39.0 ], "center": [ -377.0, -30.0 ], "radius_mm": 9.0, "clockwise": false }, { "type": "arc", "start": [ -377.0, -39.0 ], "end": [ -368.0, -30.0 ], "center": [ -377.0, -30.0 ], "radius_mm": 9.0, "clockwise": false }, { "type": "line", "start": [ -368.0, -30.0 ], "end": [ -368.0, 30.0 ] }, { "type": "arc", "start": [ -368.0, 30.0 ], "end": [ -377.0, 39.0 ], "center": [ -377.0, 30.0 ], "radius_mm": 9.0, "clockwise": false }, { "type": "arc", "start": [ -377.0, 39.0 ], "end": [ -386.0, 30.0 ], "center": [ -377.0, 30.0 ], "radius_mm": 9.0, "clockwise": false }, { "type": "line", "start": [ -386.0, 30.0 ], "end": [ -386.0, -30.0 ] } ] } ] } }, { "id": "sk_005", "name": "Sketch4", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -30.0, 2.0 ], "end": [ 30.0, 2.0 ] }, { "type": "line", "start": [ 30.0, 2.0 ], "end": [ 30.0, 61.0 ] }, { "type": "line", "start": [ 30.0, 61.0 ], "end": [ -30.0, 61.0 ] }, { "type": "line", "start": [ -30.0, 61.0 ], "end": [ -30.0, 2.0 ] } ] }, { "role": "inner", "closed": true, "segments": [ { "type": "circle", "center": [ 0.0, 40.0 ], "radius_mm": 16.0 } ] } ] } }, { "id": "sk_006", "name": "Sketch5", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -25.0, 2.0 ], "end": [ 25.0, 2.0 ] }, { "type": "line", "start": [ 25.0, 2.0 ], "end": [ 25.0, 22.0 ] }, { "type": "line", "start": [ 25.0, 22.0 ], "end": [ -25.0, 22.0 ] }, { "type": "line", "start": [ -25.0, 22.0 ], "end": [ -25.0, 2.0 ] } ] } ] } }, { "id": "sk_007", "name": "Sketch6", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -22.5, 60.5 ], "end": [ -25.0, 60.5 ] }, { "type": "line", "start": [ -25.0, 60.5 ], "end": [ -25.0, 55.5 ] }, { "type": "line", "start": [ -25.0, 55.5 ], "end": [ -25.25, 55.5 ] }, { "type": "line", "start": [ -25.25, 55.5 ], "end": [ -25.25, 61.0 ] }, { "type": "line", "start": [ -25.25, 61.0 ], "end": [ -22.5, 61.0 ] }, { "type": "line", "start": [ -22.5, 61.0 ], "end": [ -22.5, 60.5 ] } ] } ], "construction": [ { "type": "line", "start": [ -22.5, 61.0 ], "end": [ -22.5, 55.5 ] } ] } }, { "id": "sk_008", "name": "Sketch7", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -375.989637029, -20.75 ], "end": [ -378.010362971, -20.75 ] }, { "type": "line", "start": [ -378.010362971, -20.75 ], "end": [ -379.020725942, -22.5 ] }, { "type": "line", "start": [ -379.020725942, -22.5 ], "end": [ -378.010362971, -24.25 ] }, { "type": "line", "start": [ -378.010362971, -24.25 ], "end": [ -375.989637029, -24.25 ] }, { "type": "line", "start": [ -375.989637029, -24.25 ], "end": [ -374.979274058, -22.5 ] }, { "type": "line", "start": [ -374.979274058, -22.5 ], "end": [ -375.989637029, -20.75 ] } ] } ] } }, { "id": "sk_009", "name": "Sketch8", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 22.5, 60.5 ], "end": [ 20.0, 60.5 ] }, { "type": "line", "start": [ 20.0, 60.5 ], "end": [ 20.0, 55.5 ] }, { "type": "line", "start": [ 20.0, 55.5 ], "end": [ 19.75, 55.5 ] }, { "type": "line", "start": [ 19.75, 55.5 ], "end": [ 19.75, 61.0 ] }, { "type": "line", "start": [ 19.75, 61.0 ], "end": [ 22.5, 61.0 ] }, { "type": "line", "start": [ 22.5, 61.0 ], "end": [ 22.5, 60.5 ] } ] } ], "construction": [ { "type": "line", "start": [ 22.5, 61.0 ], "end": [ 22.5, 55.5 ] } ] } }, { "id": "sk_010", "name": "Sketch9", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -375.989637029, 24.25 ], "end": [ -378.010362971, 24.25 ] }, { "type": "line", "start": [ -378.010362971, 24.25 ], "end": [ -379.020725942, 22.5 ] }, { "type": "line", "start": [ -379.020725942, 22.5 ], "end": [ -378.010362971, 20.75 ] }, { "type": "line", "start": [ -378.010362971, 20.75 ], "end": [ -375.989637029, 20.75 ] }, { "type": "line", "start": [ -375.989637029, 20.75 ], "end": [ -374.979274058, 22.5 ] }, { "type": "line", "start": [ -374.979274058, 22.5 ], "end": [ -375.989637029, 24.25 ] } ] } ] } }, { "id": "sk_011", "name": "Sketch10", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -19.0, 21.5 ], "end": [ -21.5, 21.5 ] }, { "type": "line", "start": [ -21.5, 21.5 ], "end": [ -21.5, 16.5 ] }, { "type": "line", "start": [ -21.5, 16.5 ], "end": [ -21.75, 16.5 ] }, { "type": "line", "start": [ -21.75, 16.5 ], "end": [ -21.75, 22.0 ] }, { "type": "line", "start": [ -21.75, 22.0 ], "end": [ -19.0, 22.0 ] }, { "type": "line", "start": [ -19.0, 22.0 ], "end": [ -19.0, 21.5 ] } ] } ], "construction": [ { "type": "line", "start": [ -19.0, 22.0 ], "end": [ -19.0, 16.5 ] } ] } }, { "id": "sk_012", "name": "Sketch11", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 19.0, 21.5 ], "end": [ 16.5, 21.5 ] }, { "type": "line", "start": [ 16.5, 21.5 ], "end": [ 16.5, 16.5 ] }, { "type": "line", "start": [ 16.5, 16.5 ], "end": [ 16.25, 16.5 ] }, { "type": "line", "start": [ 16.25, 16.5 ], "end": [ 16.25, 22.0 ] }, { "type": "line", "start": [ 16.25, 22.0 ], "end": [ 19.0, 22.0 ] }, { "type": "line", "start": [ 19.0, 22.0 ], "end": [ 19.0, 21.5 ] } ] } ], "construction": [ { "type": "line", "start": [ 19.0, 22.0 ], "end": [ 19.0, 16.5 ] } ] } }, { "id": "sk_013", "name": "Sketch12", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -354.989637029, 20.75 ], "end": [ -357.010362971, 20.75 ] }, { "type": "line", "start": [ -357.010362971, 20.75 ], "end": [ -358.020725942, 19.0 ] }, { "type": "line", "start": [ -358.020725942, 19.0 ], "end": [ -357.010362971, 17.25 ] }, { "type": "line", "start": [ -357.010362971, 17.25 ], "end": [ -354.989637029, 17.25 ] }, { "type": "line", "start": [ -354.989637029, 17.25 ], "end": [ -353.979274058, 19.0 ] }, { "type": "line", "start": [ -353.979274058, 19.0 ], "end": [ -354.989637029, 20.75 ] } ] } ] } }, { "id": "sk_014", "name": "Sketch13", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -354.989637029, -17.25 ], "end": [ -357.010362971, -17.25 ] }, { "type": "line", "start": [ -357.010362971, -17.25 ], "end": [ -358.020725942, -19.0 ] }, { "type": "line", "start": [ -358.020725942, -19.0 ], "end": [ -357.010362971, -20.75 ] }, { "type": "line", "start": [ -357.010362971, -20.75 ], "end": [ -354.989637029, -20.75 ] }, { "type": "line", "start": [ -354.989637029, -20.75 ], "end": [ -353.979274058, -19.0 ] }, { "type": "line", "start": [ -353.979274058, -19.0 ], "end": [ -354.989637029, -17.25 ] } ] } ] } }, { "id": "sk_015", "name": "Sketch14", "role": "profile", "workplane": { "origin_mm": [ 60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -360.0, 0.0 ], "end": [ -364.5, 0.0 ] }, { "type": "line", "start": [ -364.5, 0.0 ], "end": [ -364.5, 11.5 ] }, { "type": "line", "start": [ -364.5, 11.5 ], "end": [ -367.0, 11.5 ] }, { "type": "line", "start": [ -367.0, 11.5 ], "end": [ -367.0, 39.0 ] }, { "type": "line", "start": [ -367.0, 39.0 ], "end": [ -360.0, 39.0 ] }, { "type": "line", "start": [ -360.0, 39.0 ], "end": [ -360.0, 0.0 ] } ] } ], "construction": [ { "type": "line", "start": [ -360.0, 39.0 ], "end": [ -360.0, 0.0 ] } ] } }, { "id": "sk_016", "name": "Sketch15", "role": "profile", "workplane": { "origin_mm": [ -60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -360.0, 0.0 ], "end": [ -364.5, 0.0 ] }, { "type": "line", "start": [ -364.5, 0.0 ], "end": [ -364.5, 11.5 ] }, { "type": "line", "start": [ -364.5, 11.5 ], "end": [ -367.0, 11.5 ] }, { "type": "line", "start": [ -367.0, 11.5 ], "end": [ -367.0, 39.0 ] }, { "type": "line", "start": [ -367.0, 39.0 ], "end": [ -360.0, 39.0 ] }, { "type": "line", "start": [ -360.0, 39.0 ], "end": [ -360.0, 0.0 ] } ] } ], "construction": [ { "type": "line", "start": [ -360.0, 39.0 ], "end": [ -360.0, 0.0 ] } ] } }, { "id": "sk_017", "name": "Sketch16", "role": "profile", "workplane": { "origin_mm": [ -60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -240.0, 0.0 ], "end": [ -244.5, 0.0 ] }, { "type": "line", "start": [ -244.5, 0.0 ], "end": [ -244.5, 11.5 ] }, { "type": "line", "start": [ -244.5, 11.5 ], "end": [ -247.0, 11.5 ] }, { "type": "line", "start": [ -247.0, 11.5 ], "end": [ -247.0, 39.0 ] }, { "type": "line", "start": [ -247.0, 39.0 ], "end": [ -240.0, 39.0 ] }, { "type": "line", "start": [ -240.0, 39.0 ], "end": [ -240.0, 0.0 ] } ] } ], "construction": [ { "type": "line", "start": [ -240.0, 39.0 ], "end": [ -240.0, 0.0 ] } ] } }, { "id": "sk_018", "name": "Sketch17", "role": "profile", "workplane": { "origin_mm": [ 60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -240.0, 0.0 ], "end": [ -244.5, 0.0 ] }, { "type": "line", "start": [ -244.5, 0.0 ], "end": [ -244.5, 11.5 ] }, { "type": "line", "start": [ -244.5, 11.5 ], "end": [ -247.0, 11.5 ] }, { "type": "line", "start": [ -247.0, 11.5 ], "end": [ -247.0, 39.0 ] }, { "type": "line", "start": [ -247.0, 39.0 ], "end": [ -240.0, 39.0 ] }, { "type": "line", "start": [ -240.0, 39.0 ], "end": [ -240.0, 0.0 ] } ] } ], "construction": [ { "type": "line", "start": [ -240.0, 39.0 ], "end": [ -240.0, 0.0 ] } ] } }, { "id": "sk_019", "name": "Sketch18", "role": "profile", "workplane": { "origin_mm": [ -60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -120.0, 0.0 ], "end": [ -124.5, 0.0 ] }, { "type": "line", "start": [ -124.5, 0.0 ], "end": [ -124.5, 11.5 ] }, { "type": "line", "start": [ -124.5, 11.5 ], "end": [ -127.0, 11.5 ] }, { "type": "line", "start": [ -127.0, 11.5 ], "end": [ -127.0, 39.0 ] }, { "type": "line", "start": [ -127.0, 39.0 ], "end": [ -120.0, 39.0 ] }, { "type": "line", "start": [ -120.0, 39.0 ], "end": [ -120.0, 0.0 ] } ] } ], "construction": [ { "type": "line", "start": [ -120.0, 39.0 ], "end": [ -120.0, 0.0 ] } ] } }, { "id": "sk_020", "name": "Sketch19", "role": "profile", "workplane": { "origin_mm": [ 60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -120.0, 0.0 ], "end": [ -124.5, 0.0 ] }, { "type": "line", "start": [ -124.5, 0.0 ], "end": [ -124.5, 11.5 ] }, { "type": "line", "start": [ -124.5, 11.5 ], "end": [ -127.0, 11.5 ] }, { "type": "line", "start": [ -127.0, 11.5 ], "end": [ -127.0, 39.0 ] }, { "type": "line", "start": [ -127.0, 39.0 ], "end": [ -120.0, 39.0 ] }, { "type": "line", "start": [ -120.0, 39.0 ], "end": [ -120.0, 0.0 ] } ] } ], "construction": [ { "type": "line", "start": [ -120.0, 39.0 ], "end": [ -120.0, 0.0 ] } ] } }, { "id": "sk_021", "name": "Sketch20", "role": "profile", "workplane": { "origin_mm": [ -60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 0.0, 0.0 ], "end": [ -4.5, 0.0 ] }, { "type": "line", "start": [ -4.5, 0.0 ], "end": [ -4.5, 11.5 ] }, { "type": "line", "start": [ -4.5, 11.5 ], "end": [ -7.0, 11.5 ] }, { "type": "line", "start": [ -7.0, 11.5 ], "end": [ -7.0, 39.0 ] }, { "type": "line", "start": [ -7.0, 39.0 ], "end": [ 0.0, 39.0 ] }, { "type": "line", "start": [ 0.0, 39.0 ], "end": [ 0.0, 0.0 ] } ] } ], "construction": [ { "type": "line", "start": [ 0.0, 39.0 ], "end": [ 0.0, 0.0 ] } ] } }, { "id": "sk_022", "name": "Sketch21", "role": "profile", "workplane": { "origin_mm": [ 60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 0.0, 0.0 ], "end": [ -4.5, 0.0 ] }, { "type": "line", "start": [ -4.5, 0.0 ], "end": [ -4.5, 11.5 ] }, { "type": "line", "start": [ -4.5, 11.5 ], "end": [ -7.0, 11.5 ] }, { "type": "line", "start": [ -7.0, 11.5 ], "end": [ -7.0, 39.0 ] }, { "type": "line", "start": [ -7.0, 39.0 ], "end": [ 0.0, 39.0 ] }, { "type": "line", "start": [ 0.0, 39.0 ], "end": [ 0.0, 0.0 ] } ] } ], "construction": [ { "type": "line", "start": [ 0.0, 39.0 ], "end": [ 0.0, 0.0 ] } ] } }, { "id": "sk_023", "name": "Sketch22", "role": "profile", "workplane": { "origin_mm": [ -60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 120.0, 0.0 ], "end": [ 115.5, 0.0 ] }, { "type": "line", "start": [ 115.5, 0.0 ], "end": [ 115.5, 11.5 ] }, { "type": "line", "start": [ 115.5, 11.5 ], "end": [ 113.0, 11.5 ] }, { "type": "line", "start": [ 113.0, 11.5 ], "end": [ 113.0, 39.0 ] }, { "type": "line", "start": [ 113.0, 39.0 ], "end": [ 120.0, 39.0 ] }, { "type": "line", "start": [ 120.0, 39.0 ], "end": [ 120.0, 0.0 ] } ] } ], "construction": [ { "type": "line", "start": [ 120.0, 39.0 ], "end": [ 120.0, 0.0 ] } ] } }, { "id": "sk_024", "name": "Sketch23", "role": "profile", "workplane": { "origin_mm": [ 60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 120.0, 0.0 ], "end": [ 115.5, 0.0 ] }, { "type": "line", "start": [ 115.5, 0.0 ], "end": [ 115.5, 11.5 ] }, { "type": "line", "start": [ 115.5, 11.5 ], "end": [ 113.0, 11.5 ] }, { "type": "line", "start": [ 113.0, 11.5 ], "end": [ 113.0, 39.0 ] }, { "type": "line", "start": [ 113.0, 39.0 ], "end": [ 120.0, 39.0 ] }, { "type": "line", "start": [ 120.0, 39.0 ], "end": [ 120.0, 0.0 ] } ] } ], "construction": [ { "type": "line", "start": [ 120.0, 39.0 ], "end": [ 120.0, 0.0 ] } ] } }, { "id": "sk_025", "name": "Sketch24", "role": "profile", "workplane": { "origin_mm": [ -60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 240.0, 0.0 ], "end": [ 235.5, 0.0 ] }, { "type": "line", "start": [ 235.5, 0.0 ], "end": [ 235.5, 11.5 ] }, { "type": "line", "start": [ 235.5, 11.5 ], "end": [ 233.0, 11.5 ] }, { "type": "line", "start": [ 233.0, 11.5 ], "end": [ 233.0, 39.0 ] }, { "type": "line", "start": [ 233.0, 39.0 ], "end": [ 240.0, 39.0 ] }, { "type": "line", "start": [ 240.0, 39.0 ], "end": [ 240.0, 0.0 ] } ] } ], "construction": [ { "type": "line", "start": [ 240.0, 39.0 ], "end": [ 240.0, 0.0 ] } ] } }, { "id": "sk_026", "name": "Sketch25", "role": "profile", "workplane": { "origin_mm": [ 60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 240.0, 0.0 ], "end": [ 235.5, 0.0 ] }, { "type": "line", "start": [ 235.5, 0.0 ], "end": [ 235.5, 11.5 ] }, { "type": "line", "start": [ 235.5, 11.5 ], "end": [ 233.0, 11.5 ] }, { "type": "line", "start": [ 233.0, 11.5 ], "end": [ 233.0, 39.0 ] }, { "type": "line", "start": [ 233.0, 39.0 ], "end": [ 240.0, 39.0 ] }, { "type": "line", "start": [ 240.0, 39.0 ], "end": [ 240.0, 0.0 ] } ] } ], "construction": [ { "type": "line", "start": [ 240.0, 39.0 ], "end": [ 240.0, 0.0 ] } ] } }, { "id": "sk_027", "name": "Sketch26", "role": "profile", "workplane": { "origin_mm": [ -60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 360.0, 0.0 ], "end": [ 355.5, 0.0 ] }, { "type": "line", "start": [ 355.5, 0.0 ], "end": [ 355.5, 11.5 ] }, { "type": "line", "start": [ 355.5, 11.5 ], "end": [ 353.0, 11.5 ] }, { "type": "line", "start": [ 353.0, 11.5 ], "end": [ 353.0, 39.0 ] }, { "type": "line", "start": [ 353.0, 39.0 ], "end": [ 360.0, 39.0 ] }, { "type": "line", "start": [ 360.0, 39.0 ], "end": [ 360.0, 0.0 ] } ] } ], "construction": [ { "type": "line", "start": [ 360.0, 39.0 ], "end": [ 360.0, 0.0 ] } ] } }, { "id": "sk_028", "name": "Sketch27", "role": "profile", "workplane": { "origin_mm": [ 60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 360.0, 0.0 ], "end": [ 355.5, 0.0 ] }, { "type": "line", "start": [ 355.5, 0.0 ], "end": [ 355.5, 11.5 ] }, { "type": "line", "start": [ 355.5, 11.5 ], "end": [ 353.0, 11.5 ] }, { "type": "line", "start": [ 353.0, 11.5 ], "end": [ 353.0, 39.0 ] }, { "type": "line", "start": [ 353.0, 39.0 ], "end": [ 360.0, 39.0 ] }, { "type": "line", "start": [ 360.0, 39.0 ], "end": [ 360.0, 0.0 ] } ] } ], "construction": [ { "type": "line", "start": [ 360.0, 39.0 ], "end": [ 360.0, 0.0 ] } ] } }, { "id": "sk_029", "name": "Sketch28", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -14.0, 2.0 ], "end": [ 14.0, 2.0 ] }, { "type": "line", "start": [ 14.0, 2.0 ], "end": [ 14.0, 17.0 ] }, { "type": "line", "start": [ 14.0, 17.0 ], "end": [ -14.0, 17.0 ] }, { "type": "line", "start": [ -14.0, 17.0 ], "end": [ -14.0, 2.0 ] } ] } ] } }, { "id": "sk_030", "name": "Sketch29", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -10.0, 16.5 ], "end": [ -12.5, 16.5 ] }, { "type": "line", "start": [ -12.5, 16.5 ], "end": [ -12.5, 11.5 ] }, { "type": "line", "start": [ -12.5, 11.5 ], "end": [ -12.75, 11.5 ] }, { "type": "line", "start": [ -12.75, 11.5 ], "end": [ -12.75, 17.0 ] }, { "type": "line", "start": [ -12.75, 17.0 ], "end": [ -10.0, 17.0 ] }, { "type": "line", "start": [ -10.0, 17.0 ], "end": [ -10.0, 16.5 ] } ] } ], "construction": [ { "type": "line", "start": [ -10.0, 17.0 ], "end": [ -10.0, 11.5 ] } ] } }, { "id": "sk_031", "name": "Sketch30", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 10.0, 16.5 ], "end": [ 7.5, 16.5 ] }, { "type": "line", "start": [ 7.5, 16.5 ], "end": [ 7.5, 11.5 ] }, { "type": "line", "start": [ 7.5, 11.5 ], "end": [ 7.25, 11.5 ] }, { "type": "line", "start": [ 7.25, 11.5 ], "end": [ 7.25, 17.0 ] }, { "type": "line", "start": [ 7.25, 17.0 ], "end": [ 10.0, 17.0 ] }, { "type": "line", "start": [ 10.0, 17.0 ], "end": [ 10.0, 16.5 ] } ] } ], "construction": [ { "type": "line", "start": [ 10.0, 17.0 ], "end": [ 10.0, 11.5 ] } ] } }, { "id": "sk_032", "name": "Sketch31", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 346.510362971, -8.25 ], "end": [ 344.489637029, -8.25 ] }, { "type": "line", "start": [ 344.489637029, -8.25 ], "end": [ 343.479274058, -10.0 ] }, { "type": "line", "start": [ 343.479274058, -10.0 ], "end": [ 344.489637029, -11.75 ] }, { "type": "line", "start": [ 344.489637029, -11.75 ], "end": [ 346.510362971, -11.75 ] }, { "type": "line", "start": [ 346.510362971, -11.75 ], "end": [ 347.520725942, -10.0 ] }, { "type": "line", "start": [ 347.520725942, -10.0 ], "end": [ 346.510362971, -8.25 ] } ] } ] } }, { "id": "sk_033", "name": "Sketch32", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 346.510362971, 11.75 ], "end": [ 344.489637029, 11.75 ] }, { "type": "line", "start": [ 344.489637029, 11.75 ], "end": [ 343.479274058, 10.0 ] }, { "type": "line", "start": [ 343.479274058, 10.0 ], "end": [ 344.489637029, 8.25 ] }, { "type": "line", "start": [ 344.489637029, 8.25 ], "end": [ 346.510362971, 8.25 ] }, { "type": "line", "start": [ 346.510362971, 8.25 ], "end": [ 347.520725942, 10.0 ] }, { "type": "line", "start": [ 347.520725942, 10.0 ], "end": [ 346.510362971, 11.75 ] } ] } ] } }, { "id": "sk_034", "name": "Sketch33", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "arc", "start": [ 362.0, -30.5 ], "end": [ 372.0, -40.5 ], "center": [ 372.0, -30.5 ], "radius_mm": 10.0, "clockwise": false }, { "type": "line", "start": [ 372.0, -40.5 ], "end": [ 410.0, -40.5 ] }, { "type": "line", "start": [ 410.0, -40.5 ], "end": [ 410.0, 40.5 ] }, { "type": "line", "start": [ 410.0, 40.5 ], "end": [ 372.0, 40.5 ] }, { "type": "arc", "start": [ 372.0, 40.5 ], "end": [ 362.0, 30.5 ], "center": [ 372.0, 30.5 ], "radius_mm": 10.0, "clockwise": false }, { "type": "line", "start": [ 362.0, 30.5 ], "end": [ 362.0, -30.5 ] } ] } ] } }, { "id": "sk_035", "name": "Sketch34", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "arc", "start": [ 357.0, -30.5 ], "end": [ 367.0, -40.5 ], "center": [ 367.0, -30.5 ], "radius_mm": 10.0, "clockwise": false }, { "type": "line", "start": [ 367.0, -40.5 ], "end": [ 380.0, -40.5 ] }, { "type": "line", "start": [ 380.0, -40.5 ], "end": [ 380.0, 40.5 ] }, { "type": "line", "start": [ 380.0, 40.5 ], "end": [ 367.0, 40.5 ] }, { "type": "arc", "start": [ 367.0, 40.5 ], "end": [ 357.0, 30.5 ], "center": [ 367.0, 30.5 ], "radius_mm": 10.0, "clockwise": false }, { "type": "line", "start": [ 357.0, 30.5 ], "end": [ 357.0, -30.5 ] } ] } ] } }, { "id": "sk_036", "name": "Sketch35", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -76.0, 51.0 ], "end": [ -71.75, 51.0 ] }, { "type": "line", "start": [ -71.75, 51.0 ], "end": [ -71.75, 46.0 ] }, { "type": "line", "start": [ -71.75, 46.0 ], "end": [ -73.5, 46.0 ] }, { "type": "line", "start": [ -73.5, 46.0 ], "end": [ -73.5, 39.0 ] }, { "type": "line", "start": [ -73.5, 39.0 ], "end": [ -76.0, 39.0 ] }, { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } }, { "id": "sk_037", "name": "Sketch36", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 76.0, 51.0 ], "end": [ 80.25, 51.0 ] }, { "type": "line", "start": [ 80.25, 51.0 ], "end": [ 80.25, 46.0 ] }, { "type": "line", "start": [ 80.25, 46.0 ], "end": [ 78.5, 46.0 ] }, { "type": "line", "start": [ 78.5, 46.0 ], "end": [ 78.5, 39.0 ] }, { "type": "line", "start": [ 78.5, 39.0 ], "end": [ 76.0, 39.0 ] }, { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } }, { "id": "sk_038", "name": "Sketch37", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -76.0, 51.0 ], "end": [ -71.75, 51.0 ] }, { "type": "line", "start": [ -71.75, 51.0 ], "end": [ -71.75, 46.0 ] }, { "type": "line", "start": [ -71.75, 46.0 ], "end": [ -73.5, 46.0 ] }, { "type": "line", "start": [ -73.5, 46.0 ], "end": [ -73.5, 39.0 ] }, { "type": "line", "start": [ -73.5, 39.0 ], "end": [ -76.0, 39.0 ] }, { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } }, { "id": "sk_039", "name": "Sketch38", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 76.0, 51.0 ], "end": [ 80.25, 51.0 ] }, { "type": "line", "start": [ 80.25, 51.0 ], "end": [ 80.25, 46.0 ] }, { "type": "line", "start": [ 80.25, 46.0 ], "end": [ 78.5, 46.0 ] }, { "type": "line", "start": [ 78.5, 46.0 ], "end": [ 78.5, 39.0 ] }, { "type": "line", "start": [ 78.5, 39.0 ], "end": [ 76.0, 39.0 ] }, { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } }, { "id": "sk_040", "name": "Sketch39", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -76.0, 51.0 ], "end": [ -71.75, 51.0 ] }, { "type": "line", "start": [ -71.75, 51.0 ], "end": [ -71.75, 46.0 ] }, { "type": "line", "start": [ -71.75, 46.0 ], "end": [ -73.5, 46.0 ] }, { "type": "line", "start": [ -73.5, 46.0 ], "end": [ -73.5, 39.0 ] }, { "type": "line", "start": [ -73.5, 39.0 ], "end": [ -76.0, 39.0 ] }, { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } }, { "id": "sk_041", "name": "Sketch40", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 76.0, 51.0 ], "end": [ 80.25, 51.0 ] }, { "type": "line", "start": [ 80.25, 51.0 ], "end": [ 80.25, 46.0 ] }, { "type": "line", "start": [ 80.25, 46.0 ], "end": [ 78.5, 46.0 ] }, { "type": "line", "start": [ 78.5, 46.0 ], "end": [ 78.5, 39.0 ] }, { "type": "line", "start": [ 78.5, 39.0 ], "end": [ 76.0, 39.0 ] }, { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } }, { "id": "sk_042", "name": "Sketch41", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -76.0, 51.0 ], "end": [ -71.75, 51.0 ] }, { "type": "line", "start": [ -71.75, 51.0 ], "end": [ -71.75, 46.0 ] }, { "type": "line", "start": [ -71.75, 46.0 ], "end": [ -73.5, 46.0 ] }, { "type": "line", "start": [ -73.5, 46.0 ], "end": [ -73.5, 39.0 ] }, { "type": "line", "start": [ -73.5, 39.0 ], "end": [ -76.0, 39.0 ] }, { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } }, { "id": "sk_043", "name": "Sketch42", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 76.0, 51.0 ], "end": [ 80.25, 51.0 ] }, { "type": "line", "start": [ 80.25, 51.0 ], "end": [ 80.25, 46.0 ] }, { "type": "line", "start": [ 80.25, 46.0 ], "end": [ 78.5, 46.0 ] }, { "type": "line", "start": [ 78.5, 46.0 ], "end": [ 78.5, 39.0 ] }, { "type": "line", "start": [ 78.5, 39.0 ], "end": [ 76.0, 39.0 ] }, { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } }, { "id": "sk_044", "name": "Sketch43", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -76.0, 51.0 ], "end": [ -71.75, 51.0 ] }, { "type": "line", "start": [ -71.75, 51.0 ], "end": [ -71.75, 46.0 ] }, { "type": "line", "start": [ -71.75, 46.0 ], "end": [ -73.5, 46.0 ] }, { "type": "line", "start": [ -73.5, 46.0 ], "end": [ -73.5, 39.0 ] }, { "type": "line", "start": [ -73.5, 39.0 ], "end": [ -76.0, 39.0 ] }, { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } }, { "id": "sk_045", "name": "Sketch44", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 76.0, 51.0 ], "end": [ 80.25, 51.0 ] }, { "type": "line", "start": [ 80.25, 51.0 ], "end": [ 80.25, 46.0 ] }, { "type": "line", "start": [ 80.25, 46.0 ], "end": [ 78.5, 46.0 ] }, { "type": "line", "start": [ 78.5, 46.0 ], "end": [ 78.5, 39.0 ] }, { "type": "line", "start": [ 78.5, 39.0 ], "end": [ 76.0, 39.0 ] }, { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } }, { "id": "sk_046", "name": "Sketch45", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -76.0, 51.0 ], "end": [ -71.75, 51.0 ] }, { "type": "line", "start": [ -71.75, 51.0 ], "end": [ -71.75, 46.0 ] }, { "type": "line", "start": [ -71.75, 46.0 ], "end": [ -73.5, 46.0 ] }, { "type": "line", "start": [ -73.5, 46.0 ], "end": [ -73.5, 39.0 ] }, { "type": "line", "start": [ -73.5, 39.0 ], "end": [ -76.0, 39.0 ] }, { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } }, { "id": "sk_047", "name": "Sketch46", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 76.0, 51.0 ], "end": [ 80.25, 51.0 ] }, { "type": "line", "start": [ 80.25, 51.0 ], "end": [ 80.25, 46.0 ] }, { "type": "line", "start": [ 80.25, 46.0 ], "end": [ 78.5, 46.0 ] }, { "type": "line", "start": [ 78.5, 46.0 ], "end": [ 78.5, 39.0 ] }, { "type": "line", "start": [ 78.5, 39.0 ], "end": [ 76.0, 39.0 ] }, { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } }, { "id": "sk_048", "name": "Sketch47", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -76.0, 51.0 ], "end": [ -71.75, 51.0 ] }, { "type": "line", "start": [ -71.75, 51.0 ], "end": [ -71.75, 46.0 ] }, { "type": "line", "start": [ -71.75, 46.0 ], "end": [ -73.5, 46.0 ] }, { "type": "line", "start": [ -73.5, 46.0 ], "end": [ -73.5, 39.0 ] }, { "type": "line", "start": [ -73.5, 39.0 ], "end": [ -76.0, 39.0 ] }, { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } }, { "id": "sk_049", "name": "Sketch48", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 76.0, 51.0 ], "end": [ 80.25, 51.0 ] }, { "type": "line", "start": [ 80.25, 51.0 ], "end": [ 80.25, 46.0 ] }, { "type": "line", "start": [ 80.25, 46.0 ], "end": [ 78.5, 46.0 ] }, { "type": "line", "start": [ 78.5, 46.0 ], "end": [ 78.5, 39.0 ] }, { "type": "line", "start": [ 78.5, 39.0 ], "end": [ 76.0, 39.0 ] }, { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } }, { "id": "sk_050", "name": "Sketch49", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -76.0, 51.0 ], "end": [ -71.75, 51.0 ] }, { "type": "line", "start": [ -71.75, 51.0 ], "end": [ -71.75, 46.0 ] }, { "type": "line", "start": [ -71.75, 46.0 ], "end": [ -73.5, 46.0 ] }, { "type": "line", "start": [ -73.5, 46.0 ], "end": [ -73.5, 39.0 ] }, { "type": "line", "start": [ -73.5, 39.0 ], "end": [ -76.0, 39.0 ] }, { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } }, { "id": "sk_051", "name": "Sketch50", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 76.0, 51.0 ], "end": [ 80.25, 51.0 ] }, { "type": "line", "start": [ 80.25, 51.0 ], "end": [ 80.25, 46.0 ] }, { "type": "line", "start": [ 80.25, 46.0 ], "end": [ 78.5, 46.0 ] }, { "type": "line", "start": [ 78.5, 46.0 ], "end": [ 78.5, 39.0 ] }, { "type": "line", "start": [ 78.5, 39.0 ], "end": [ 76.0, 39.0 ] }, { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } }, { "id": "sk_052", "name": "Sketch51", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -76.0, 51.0 ], "end": [ -71.75, 51.0 ] }, { "type": "line", "start": [ -71.75, 51.0 ], "end": [ -71.75, 46.0 ] }, { "type": "line", "start": [ -71.75, 46.0 ], "end": [ -73.5, 46.0 ] }, { "type": "line", "start": [ -73.5, 46.0 ], "end": [ -73.5, 39.0 ] }, { "type": "line", "start": [ -73.5, 39.0 ], "end": [ -76.0, 39.0 ] }, { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } }, { "id": "sk_053", "name": "Sketch52", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 76.0, 51.0 ], "end": [ 80.25, 51.0 ] }, { "type": "line", "start": [ 80.25, 51.0 ], "end": [ 80.25, 46.0 ] }, { "type": "line", "start": [ 80.25, 46.0 ], "end": [ 78.5, 46.0 ] }, { "type": "line", "start": [ 78.5, 46.0 ], "end": [ 78.5, 39.0 ] }, { "type": "line", "start": [ 78.5, 39.0 ], "end": [ 76.0, 39.0 ] }, { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } }, { "id": "sk_054", "name": "Sketch53", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -76.0, 51.0 ], "end": [ -71.75, 51.0 ] }, { "type": "line", "start": [ -71.75, 51.0 ], "end": [ -71.75, 46.0 ] }, { "type": "line", "start": [ -71.75, 46.0 ], "end": [ -73.5, 46.0 ] }, { "type": "line", "start": [ -73.5, 46.0 ], "end": [ -73.5, 39.0 ] }, { "type": "line", "start": [ -73.5, 39.0 ], "end": [ -76.0, 39.0 ] }, { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } }, { "id": "sk_055", "name": "Sketch54", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 76.0, 51.0 ], "end": [ 80.25, 51.0 ] }, { "type": "line", "start": [ 80.25, 51.0 ], "end": [ 80.25, 46.0 ] }, { "type": "line", "start": [ 80.25, 46.0 ], "end": [ 78.5, 46.0 ] }, { "type": "line", "start": [ 78.5, 46.0 ], "end": [ 78.5, 39.0 ] }, { "type": "line", "start": [ 78.5, 39.0 ], "end": [ 76.0, 39.0 ] }, { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } }, { "id": "sk_056", "name": "Sketch55", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -76.0, 51.0 ], "end": [ -71.75, 51.0 ] }, { "type": "line", "start": [ -71.75, 51.0 ], "end": [ -71.75, 46.0 ] }, { "type": "line", "start": [ -71.75, 46.0 ], "end": [ -73.5, 46.0 ] }, { "type": "line", "start": [ -73.5, 46.0 ], "end": [ -73.5, 39.0 ] }, { "type": "line", "start": [ -73.5, 39.0 ], "end": [ -76.0, 39.0 ] }, { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } }, { "id": "sk_057", "name": "Sketch56", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 76.0, 51.0 ], "end": [ 80.25, 51.0 ] }, { "type": "line", "start": [ 80.25, 51.0 ], "end": [ 80.25, 46.0 ] }, { "type": "line", "start": [ 80.25, 46.0 ], "end": [ 78.5, 46.0 ] }, { "type": "line", "start": [ 78.5, 46.0 ], "end": [ 78.5, 39.0 ] }, { "type": "line", "start": [ 78.5, 39.0 ], "end": [ 76.0, 39.0 ] }, { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } }, { "id": "sk_058", "name": "Sketch57", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -76.0, 51.0 ], "end": [ -71.75, 51.0 ] }, { "type": "line", "start": [ -71.75, 51.0 ], "end": [ -71.75, 46.0 ] }, { "type": "line", "start": [ -71.75, 46.0 ], "end": [ -73.5, 46.0 ] }, { "type": "line", "start": [ -73.5, 46.0 ], "end": [ -73.5, 39.0 ] }, { "type": "line", "start": [ -73.5, 39.0 ], "end": [ -76.0, 39.0 ] }, { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } }, { "id": "sk_059", "name": "Sketch58", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 76.0, 51.0 ], "end": [ 80.25, 51.0 ] }, { "type": "line", "start": [ 80.25, 51.0 ], "end": [ 80.25, 46.0 ] }, { "type": "line", "start": [ 80.25, 46.0 ], "end": [ 78.5, 46.0 ] }, { "type": "line", "start": [ 78.5, 46.0 ], "end": [ 78.5, 39.0 ] }, { "type": "line", "start": [ 78.5, 39.0 ], "end": [ 76.0, 39.0 ] }, { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } }, { "id": "sk_060", "name": "Sketch59", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -76.0, 51.0 ], "end": [ -71.75, 51.0 ] }, { "type": "line", "start": [ -71.75, 51.0 ], "end": [ -71.75, 46.0 ] }, { "type": "line", "start": [ -71.75, 46.0 ], "end": [ -73.5, 46.0 ] }, { "type": "line", "start": [ -73.5, 46.0 ], "end": [ -73.5, 39.0 ] }, { "type": "line", "start": [ -73.5, 39.0 ], "end": [ -76.0, 39.0 ] }, { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } }, { "id": "sk_061", "name": "Sketch60", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 76.0, 51.0 ], "end": [ 80.25, 51.0 ] }, { "type": "line", "start": [ 80.25, 51.0 ], "end": [ 80.25, 46.0 ] }, { "type": "line", "start": [ 80.25, 46.0 ], "end": [ 78.5, 46.0 ] }, { "type": "line", "start": [ 78.5, 46.0 ], "end": [ 78.5, 39.0 ] }, { "type": "line", "start": [ 78.5, 39.0 ], "end": [ 76.0, 39.0 ] }, { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } }, { "id": "sk_062", "name": "Sketch61", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -76.0, 51.0 ], "end": [ -71.75, 51.0 ] }, { "type": "line", "start": [ -71.75, 51.0 ], "end": [ -71.75, 46.0 ] }, { "type": "line", "start": [ -71.75, 46.0 ], "end": [ -73.5, 46.0 ] }, { "type": "line", "start": [ -73.5, 46.0 ], "end": [ -73.5, 39.0 ] }, { "type": "line", "start": [ -73.5, 39.0 ], "end": [ -76.0, 39.0 ] }, { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ -76.0, 39.0 ], "end": [ -76.0, 51.0 ] } ] } }, { "id": "sk_063", "name": "Sketch62", "role": "profile", "workplane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 76.0, 51.0 ], "end": [ 80.25, 51.0 ] }, { "type": "line", "start": [ 80.25, 51.0 ], "end": [ 80.25, 46.0 ] }, { "type": "line", "start": [ 80.25, 46.0 ], "end": [ 78.5, 46.0 ] }, { "type": "line", "start": [ 78.5, 46.0 ], "end": [ 78.5, 39.0 ] }, { "type": "line", "start": [ 78.5, 39.0 ], "end": [ 76.0, 39.0 ] }, { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } ], "construction": [ { "type": "line", "start": [ 76.0, 39.0 ], "end": [ 76.0, 51.0 ] } ] } }, { "id": "sk_064", "name": "Sketch63", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -390.0, -78.309401077 ], "end": [ -388.0, -77.154700538 ] }, { "type": "line", "start": [ -388.0, -77.154700538 ], "end": [ -388.0, -74.845299462 ] }, { "type": "line", "start": [ -388.0, -74.845299462 ], "end": [ -390.0, -73.690598923 ] }, { "type": "line", "start": [ -390.0, -73.690598923 ], "end": [ -392.0, -74.845299462 ] }, { "type": "line", "start": [ -392.0, -74.845299462 ], "end": [ -392.0, -77.154700538 ] }, { "type": "line", "start": [ -392.0, -77.154700538 ], "end": [ -390.0, -78.309401077 ] } ] } ] } }, { "id": "sk_065", "name": "Sketch64", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -390.0, 73.690598923 ], "end": [ -388.0, 74.845299462 ] }, { "type": "line", "start": [ -388.0, 74.845299462 ], "end": [ -388.0, 77.154700538 ] }, { "type": "line", "start": [ -388.0, 77.154700538 ], "end": [ -390.0, 78.309401077 ] }, { "type": "line", "start": [ -390.0, 78.309401077 ], "end": [ -392.0, 77.154700538 ] }, { "type": "line", "start": [ -392.0, 77.154700538 ], "end": [ -392.0, 74.845299462 ] }, { "type": "line", "start": [ -392.0, 74.845299462 ], "end": [ -390.0, 73.690598923 ] } ] } ] } }, { "id": "sk_066", "name": "Sketch65", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -330.0, -78.309401077 ], "end": [ -328.0, -77.154700538 ] }, { "type": "line", "start": [ -328.0, -77.154700538 ], "end": [ -328.0, -74.845299462 ] }, { "type": "line", "start": [ -328.0, -74.845299462 ], "end": [ -330.0, -73.690598923 ] }, { "type": "line", "start": [ -330.0, -73.690598923 ], "end": [ -332.0, -74.845299462 ] }, { "type": "line", "start": [ -332.0, -74.845299462 ], "end": [ -332.0, -77.154700538 ] }, { "type": "line", "start": [ -332.0, -77.154700538 ], "end": [ -330.0, -78.309401077 ] } ] } ] } }, { "id": "sk_067", "name": "Sketch66", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -330.0, 73.690598923 ], "end": [ -328.0, 74.845299462 ] }, { "type": "line", "start": [ -328.0, 74.845299462 ], "end": [ -328.0, 77.154700538 ] }, { "type": "line", "start": [ -328.0, 77.154700538 ], "end": [ -330.0, 78.309401077 ] }, { "type": "line", "start": [ -330.0, 78.309401077 ], "end": [ -332.0, 77.154700538 ] }, { "type": "line", "start": [ -332.0, 77.154700538 ], "end": [ -332.0, 74.845299462 ] }, { "type": "line", "start": [ -332.0, 74.845299462 ], "end": [ -330.0, 73.690598923 ] } ] } ] } }, { "id": "sk_068", "name": "Sketch67", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -270.0, -78.309401077 ], "end": [ -268.0, -77.154700538 ] }, { "type": "line", "start": [ -268.0, -77.154700538 ], "end": [ -268.0, -74.845299462 ] }, { "type": "line", "start": [ -268.0, -74.845299462 ], "end": [ -270.0, -73.690598923 ] }, { "type": "line", "start": [ -270.0, -73.690598923 ], "end": [ -272.0, -74.845299462 ] }, { "type": "line", "start": [ -272.0, -74.845299462 ], "end": [ -272.0, -77.154700538 ] }, { "type": "line", "start": [ -272.0, -77.154700538 ], "end": [ -270.0, -78.309401077 ] } ] } ] } }, { "id": "sk_069", "name": "Sketch68", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -270.0, 73.690598923 ], "end": [ -268.0, 74.845299462 ] }, { "type": "line", "start": [ -268.0, 74.845299462 ], "end": [ -268.0, 77.154700538 ] }, { "type": "line", "start": [ -268.0, 77.154700538 ], "end": [ -270.0, 78.309401077 ] }, { "type": "line", "start": [ -270.0, 78.309401077 ], "end": [ -272.0, 77.154700538 ] }, { "type": "line", "start": [ -272.0, 77.154700538 ], "end": [ -272.0, 74.845299462 ] }, { "type": "line", "start": [ -272.0, 74.845299462 ], "end": [ -270.0, 73.690598923 ] } ] } ] } }, { "id": "sk_070", "name": "Sketch69", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -210.0, -78.309401077 ], "end": [ -208.0, -77.154700538 ] }, { "type": "line", "start": [ -208.0, -77.154700538 ], "end": [ -208.0, -74.845299462 ] }, { "type": "line", "start": [ -208.0, -74.845299462 ], "end": [ -210.0, -73.690598923 ] }, { "type": "line", "start": [ -210.0, -73.690598923 ], "end": [ -212.0, -74.845299462 ] }, { "type": "line", "start": [ -212.0, -74.845299462 ], "end": [ -212.0, -77.154700538 ] }, { "type": "line", "start": [ -212.0, -77.154700538 ], "end": [ -210.0, -78.309401077 ] } ] } ] } }, { "id": "sk_071", "name": "Sketch70", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -210.0, 73.690598923 ], "end": [ -208.0, 74.845299462 ] }, { "type": "line", "start": [ -208.0, 74.845299462 ], "end": [ -208.0, 77.154700538 ] }, { "type": "line", "start": [ -208.0, 77.154700538 ], "end": [ -210.0, 78.309401077 ] }, { "type": "line", "start": [ -210.0, 78.309401077 ], "end": [ -212.0, 77.154700538 ] }, { "type": "line", "start": [ -212.0, 77.154700538 ], "end": [ -212.0, 74.845299462 ] }, { "type": "line", "start": [ -212.0, 74.845299462 ], "end": [ -210.0, 73.690598923 ] } ] } ] } }, { "id": "sk_072", "name": "Sketch71", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -150.0, -78.309401077 ], "end": [ -148.0, -77.154700538 ] }, { "type": "line", "start": [ -148.0, -77.154700538 ], "end": [ -148.0, -74.845299462 ] }, { "type": "line", "start": [ -148.0, -74.845299462 ], "end": [ -150.0, -73.690598923 ] }, { "type": "line", "start": [ -150.0, -73.690598923 ], "end": [ -152.0, -74.845299462 ] }, { "type": "line", "start": [ -152.0, -74.845299462 ], "end": [ -152.0, -77.154700538 ] }, { "type": "line", "start": [ -152.0, -77.154700538 ], "end": [ -150.0, -78.309401077 ] } ] } ] } }, { "id": "sk_073", "name": "Sketch72", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -150.0, 73.690598923 ], "end": [ -148.0, 74.845299462 ] }, { "type": "line", "start": [ -148.0, 74.845299462 ], "end": [ -148.0, 77.154700538 ] }, { "type": "line", "start": [ -148.0, 77.154700538 ], "end": [ -150.0, 78.309401077 ] }, { "type": "line", "start": [ -150.0, 78.309401077 ], "end": [ -152.0, 77.154700538 ] }, { "type": "line", "start": [ -152.0, 77.154700538 ], "end": [ -152.0, 74.845299462 ] }, { "type": "line", "start": [ -152.0, 74.845299462 ], "end": [ -150.0, 73.690598923 ] } ] } ] } }, { "id": "sk_074", "name": "Sketch73", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -90.0, -78.309401077 ], "end": [ -88.0, -77.154700538 ] }, { "type": "line", "start": [ -88.0, -77.154700538 ], "end": [ -88.0, -74.845299462 ] }, { "type": "line", "start": [ -88.0, -74.845299462 ], "end": [ -90.0, -73.690598923 ] }, { "type": "line", "start": [ -90.0, -73.690598923 ], "end": [ -92.0, -74.845299462 ] }, { "type": "line", "start": [ -92.0, -74.845299462 ], "end": [ -92.0, -77.154700538 ] }, { "type": "line", "start": [ -92.0, -77.154700538 ], "end": [ -90.0, -78.309401077 ] } ] } ] } }, { "id": "sk_075", "name": "Sketch74", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -90.0, 73.690598923 ], "end": [ -88.0, 74.845299462 ] }, { "type": "line", "start": [ -88.0, 74.845299462 ], "end": [ -88.0, 77.154700538 ] }, { "type": "line", "start": [ -88.0, 77.154700538 ], "end": [ -90.0, 78.309401077 ] }, { "type": "line", "start": [ -90.0, 78.309401077 ], "end": [ -92.0, 77.154700538 ] }, { "type": "line", "start": [ -92.0, 77.154700538 ], "end": [ -92.0, 74.845299462 ] }, { "type": "line", "start": [ -92.0, 74.845299462 ], "end": [ -90.0, 73.690598923 ] } ] } ] } }, { "id": "sk_076", "name": "Sketch75", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -30.0, -78.309401077 ], "end": [ -28.0, -77.154700538 ] }, { "type": "line", "start": [ -28.0, -77.154700538 ], "end": [ -28.0, -74.845299462 ] }, { "type": "line", "start": [ -28.0, -74.845299462 ], "end": [ -30.0, -73.690598923 ] }, { "type": "line", "start": [ -30.0, -73.690598923 ], "end": [ -32.0, -74.845299462 ] }, { "type": "line", "start": [ -32.0, -74.845299462 ], "end": [ -32.0, -77.154700538 ] }, { "type": "line", "start": [ -32.0, -77.154700538 ], "end": [ -30.0, -78.309401077 ] } ] } ] } }, { "id": "sk_077", "name": "Sketch76", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ -30.0, 73.690598923 ], "end": [ -28.0, 74.845299462 ] }, { "type": "line", "start": [ -28.0, 74.845299462 ], "end": [ -28.0, 77.154700538 ] }, { "type": "line", "start": [ -28.0, 77.154700538 ], "end": [ -30.0, 78.309401077 ] }, { "type": "line", "start": [ -30.0, 78.309401077 ], "end": [ -32.0, 77.154700538 ] }, { "type": "line", "start": [ -32.0, 77.154700538 ], "end": [ -32.0, 74.845299462 ] }, { "type": "line", "start": [ -32.0, 74.845299462 ], "end": [ -30.0, 73.690598923 ] } ] } ] } }, { "id": "sk_078", "name": "Sketch77", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 30.0, -78.309401077 ], "end": [ 32.0, -77.154700538 ] }, { "type": "line", "start": [ 32.0, -77.154700538 ], "end": [ 32.0, -74.845299462 ] }, { "type": "line", "start": [ 32.0, -74.845299462 ], "end": [ 30.0, -73.690598923 ] }, { "type": "line", "start": [ 30.0, -73.690598923 ], "end": [ 28.0, -74.845299462 ] }, { "type": "line", "start": [ 28.0, -74.845299462 ], "end": [ 28.0, -77.154700538 ] }, { "type": "line", "start": [ 28.0, -77.154700538 ], "end": [ 30.0, -78.309401077 ] } ] } ] } }, { "id": "sk_079", "name": "Sketch78", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 30.0, 73.690598923 ], "end": [ 32.0, 74.845299462 ] }, { "type": "line", "start": [ 32.0, 74.845299462 ], "end": [ 32.0, 77.154700538 ] }, { "type": "line", "start": [ 32.0, 77.154700538 ], "end": [ 30.0, 78.309401077 ] }, { "type": "line", "start": [ 30.0, 78.309401077 ], "end": [ 28.0, 77.154700538 ] }, { "type": "line", "start": [ 28.0, 77.154700538 ], "end": [ 28.0, 74.845299462 ] }, { "type": "line", "start": [ 28.0, 74.845299462 ], "end": [ 30.0, 73.690598923 ] } ] } ] } }, { "id": "sk_080", "name": "Sketch79", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 90.0, -78.309401077 ], "end": [ 92.0, -77.154700538 ] }, { "type": "line", "start": [ 92.0, -77.154700538 ], "end": [ 92.0, -74.845299462 ] }, { "type": "line", "start": [ 92.0, -74.845299462 ], "end": [ 90.0, -73.690598923 ] }, { "type": "line", "start": [ 90.0, -73.690598923 ], "end": [ 88.0, -74.845299462 ] }, { "type": "line", "start": [ 88.0, -74.845299462 ], "end": [ 88.0, -77.154700538 ] }, { "type": "line", "start": [ 88.0, -77.154700538 ], "end": [ 90.0, -78.309401077 ] } ] } ] } }, { "id": "sk_081", "name": "Sketch80", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 90.0, 73.690598923 ], "end": [ 92.0, 74.845299462 ] }, { "type": "line", "start": [ 92.0, 74.845299462 ], "end": [ 92.0, 77.154700538 ] }, { "type": "line", "start": [ 92.0, 77.154700538 ], "end": [ 90.0, 78.309401077 ] }, { "type": "line", "start": [ 90.0, 78.309401077 ], "end": [ 88.0, 77.154700538 ] }, { "type": "line", "start": [ 88.0, 77.154700538 ], "end": [ 88.0, 74.845299462 ] }, { "type": "line", "start": [ 88.0, 74.845299462 ], "end": [ 90.0, 73.690598923 ] } ] } ] } }, { "id": "sk_082", "name": "Sketch81", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 150.0, -78.309401077 ], "end": [ 152.0, -77.154700538 ] }, { "type": "line", "start": [ 152.0, -77.154700538 ], "end": [ 152.0, -74.845299462 ] }, { "type": "line", "start": [ 152.0, -74.845299462 ], "end": [ 150.0, -73.690598923 ] }, { "type": "line", "start": [ 150.0, -73.690598923 ], "end": [ 148.0, -74.845299462 ] }, { "type": "line", "start": [ 148.0, -74.845299462 ], "end": [ 148.0, -77.154700538 ] }, { "type": "line", "start": [ 148.0, -77.154700538 ], "end": [ 150.0, -78.309401077 ] } ] } ] } }, { "id": "sk_083", "name": "Sketch82", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 150.0, 73.690598923 ], "end": [ 152.0, 74.845299462 ] }, { "type": "line", "start": [ 152.0, 74.845299462 ], "end": [ 152.0, 77.154700538 ] }, { "type": "line", "start": [ 152.0, 77.154700538 ], "end": [ 150.0, 78.309401077 ] }, { "type": "line", "start": [ 150.0, 78.309401077 ], "end": [ 148.0, 77.154700538 ] }, { "type": "line", "start": [ 148.0, 77.154700538 ], "end": [ 148.0, 74.845299462 ] }, { "type": "line", "start": [ 148.0, 74.845299462 ], "end": [ 150.0, 73.690598923 ] } ] } ] } }, { "id": "sk_084", "name": "Sketch83", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 210.0, -78.309401077 ], "end": [ 212.0, -77.154700538 ] }, { "type": "line", "start": [ 212.0, -77.154700538 ], "end": [ 212.0, -74.845299462 ] }, { "type": "line", "start": [ 212.0, -74.845299462 ], "end": [ 210.0, -73.690598923 ] }, { "type": "line", "start": [ 210.0, -73.690598923 ], "end": [ 208.0, -74.845299462 ] }, { "type": "line", "start": [ 208.0, -74.845299462 ], "end": [ 208.0, -77.154700538 ] }, { "type": "line", "start": [ 208.0, -77.154700538 ], "end": [ 210.0, -78.309401077 ] } ] } ] } }, { "id": "sk_085", "name": "Sketch84", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 210.0, 73.690598923 ], "end": [ 212.0, 74.845299462 ] }, { "type": "line", "start": [ 212.0, 74.845299462 ], "end": [ 212.0, 77.154700538 ] }, { "type": "line", "start": [ 212.0, 77.154700538 ], "end": [ 210.0, 78.309401077 ] }, { "type": "line", "start": [ 210.0, 78.309401077 ], "end": [ 208.0, 77.154700538 ] }, { "type": "line", "start": [ 208.0, 77.154700538 ], "end": [ 208.0, 74.845299462 ] }, { "type": "line", "start": [ 208.0, 74.845299462 ], "end": [ 210.0, 73.690598923 ] } ] } ] } }, { "id": "sk_086", "name": "Sketch85", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 270.0, -78.309401077 ], "end": [ 272.0, -77.154700538 ] }, { "type": "line", "start": [ 272.0, -77.154700538 ], "end": [ 272.0, -74.845299462 ] }, { "type": "line", "start": [ 272.0, -74.845299462 ], "end": [ 270.0, -73.690598923 ] }, { "type": "line", "start": [ 270.0, -73.690598923 ], "end": [ 268.0, -74.845299462 ] }, { "type": "line", "start": [ 268.0, -74.845299462 ], "end": [ 268.0, -77.154700538 ] }, { "type": "line", "start": [ 268.0, -77.154700538 ], "end": [ 270.0, -78.309401077 ] } ] } ] } }, { "id": "sk_087", "name": "Sketch86", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 270.0, 73.690598923 ], "end": [ 272.0, 74.845299462 ] }, { "type": "line", "start": [ 272.0, 74.845299462 ], "end": [ 272.0, 77.154700538 ] }, { "type": "line", "start": [ 272.0, 77.154700538 ], "end": [ 270.0, 78.309401077 ] }, { "type": "line", "start": [ 270.0, 78.309401077 ], "end": [ 268.0, 77.154700538 ] }, { "type": "line", "start": [ 268.0, 77.154700538 ], "end": [ 268.0, 74.845299462 ] }, { "type": "line", "start": [ 268.0, 74.845299462 ], "end": [ 270.0, 73.690598923 ] } ] } ] } }, { "id": "sk_088", "name": "Sketch87", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 330.0, -78.309401077 ], "end": [ 332.0, -77.154700538 ] }, { "type": "line", "start": [ 332.0, -77.154700538 ], "end": [ 332.0, -74.845299462 ] }, { "type": "line", "start": [ 332.0, -74.845299462 ], "end": [ 330.0, -73.690598923 ] }, { "type": "line", "start": [ 330.0, -73.690598923 ], "end": [ 328.0, -74.845299462 ] }, { "type": "line", "start": [ 328.0, -74.845299462 ], "end": [ 328.0, -77.154700538 ] }, { "type": "line", "start": [ 328.0, -77.154700538 ], "end": [ 330.0, -78.309401077 ] } ] } ] } }, { "id": "sk_089", "name": "Sketch88", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 330.0, 73.690598923 ], "end": [ 332.0, 74.845299462 ] }, { "type": "line", "start": [ 332.0, 74.845299462 ], "end": [ 332.0, 77.154700538 ] }, { "type": "line", "start": [ 332.0, 77.154700538 ], "end": [ 330.0, 78.309401077 ] }, { "type": "line", "start": [ 330.0, 78.309401077 ], "end": [ 328.0, 77.154700538 ] }, { "type": "line", "start": [ 328.0, 77.154700538 ], "end": [ 328.0, 74.845299462 ] }, { "type": "line", "start": [ 328.0, 74.845299462 ], "end": [ 330.0, 73.690598923 ] } ] } ] } }, { "id": "sk_090", "name": "Sketch89", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 390.0, -78.309401077 ], "end": [ 392.0, -77.154700538 ] }, { "type": "line", "start": [ 392.0, -77.154700538 ], "end": [ 392.0, -74.845299462 ] }, { "type": "line", "start": [ 392.0, -74.845299462 ], "end": [ 390.0, -73.690598923 ] }, { "type": "line", "start": [ 390.0, -73.690598923 ], "end": [ 388.0, -74.845299462 ] }, { "type": "line", "start": [ 388.0, -74.845299462 ], "end": [ 388.0, -77.154700538 ] }, { "type": "line", "start": [ 388.0, -77.154700538 ], "end": [ 390.0, -78.309401077 ] } ] } ] } }, { "id": "sk_091", "name": "Sketch90", "role": "profile", "workplane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "profile": { "type": "analytic_contours", "contours": [ { "role": "outer", "closed": true, "segments": [ { "type": "line", "start": [ 390.0, 73.690598923 ], "end": [ 392.0, 74.845299462 ] }, { "type": "line", "start": [ 392.0, 74.845299462 ], "end": [ 392.0, 77.154700538 ] }, { "type": "line", "start": [ 392.0, 77.154700538 ], "end": [ 390.0, 78.309401077 ] }, { "type": "line", "start": [ 390.0, 78.309401077 ], "end": [ 388.0, 77.154700538 ] }, { "type": "line", "start": [ 388.0, 77.154700538 ], "end": [ 388.0, 74.845299462 ] }, { "type": "line", "start": [ 388.0, 74.845299462 ], "end": [ 390.0, 73.690598923 ] } ] } ] } } ] }, "features": [ { "id": "f_001", "name": "Front", "atomic_id": "reference_plane", "depends_on": [], "params": { "plane": { "origin_mm": [ 0.0, 0.0, 0.0 ], "normal": [ 0.0, 1.0, 0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": 10 }, "execution_status": "deferred" }, { "id": "f_002", "name": "Top", "atomic_id": "reference_plane", "depends_on": [ "f_001" ], "params": { "plane": { "origin_mm": [ 0.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ], "x_dir": [ 1.0, 0.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": 10 }, "execution_status": "deferred" }, { "id": "f_003", "name": "Right", "atomic_id": "reference_plane", "depends_on": [ "f_002" ], "params": { "plane": { "origin_mm": [ 0.0, 0.0, 0.0 ], "normal": [ 1.0, 0.0, 0.0 ], "x_dir": [ 0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": 10 }, "execution_status": "deferred" }, { "id": "f_004", "name": "Plane1", "atomic_id": "reference_plane", "depends_on": [ "f_003" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_002" }, "execution_status": "deferred" }, { "id": "f_005", "name": "Boss-Extrude1", "atomic_id": "extrude_add_two_sided", "depends_on": [ "f_004" ], "params": { "distance_mm": 410.0, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 }, "reverse_distance_mm": 410.0, "reverse_end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_002" }, { "id": "f_006", "name": "Plane2", "atomic_id": "reference_plane", "depends_on": [ "f_005" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_003" }, "execution_status": "deferred" }, { "id": "f_007", "name": "Cut-Extrude1", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_006", "f_005" ], "params": { "distance_mm": 79.0, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 }, "reverse_distance_mm": 79.0, "reverse_end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_003" }, { "id": "f_008", "name": "Plane3", "atomic_id": "reference_plane", "depends_on": [ "f_007" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_004" }, "execution_status": "deferred" }, { "id": "f_009", "name": "Cut-Extrude2", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_008", "f_005" ], "params": { "distance_mm": 1.15, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 }, "reverse_distance_mm": 1.15, "reverse_end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_004" }, { "id": "f_010", "name": "Plane4", "atomic_id": "reference_plane", "depends_on": [ "f_009" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_005" }, "execution_status": "deferred" }, { "id": "f_011", "name": "Boss-Extrude2", "atomic_id": "extrude_add_two_sided", "depends_on": [ "f_010", "f_005" ], "params": { "distance_mm": 8.0, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 }, "reverse_distance_mm": 8.0, "reverse_end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_005" }, { "id": "f_012", "name": "Plane5", "atomic_id": "reference_plane", "depends_on": [ "f_011" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_006" }, "execution_status": "deferred" }, { "id": "f_013", "name": "Boss-Extrude3", "atomic_id": "extrude_add_blind", "depends_on": [ "f_012", "f_005" ], "params": { "distance_mm": 15.0, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_006" }, { "id": "f_014", "name": "Plane6", "atomic_id": "reference_plane", "depends_on": [ "f_013" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_007" }, "execution_status": "deferred" }, { "id": "f_015", "name": "Cut-Revolve1", "atomic_id": "revolve_cut", "depends_on": [ "f_014", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ -22.5, 61.0, 0.0 ], "direction": [ 0.0, -1.0, 0.0 ] }, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_007", "selectors": [ { "kind": "axis", "stable_id": "eff149df5205a84afd252b9905db933198782ad808bb50631074b8847ce3ec8e", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ -0.0225, 0.061, 0.0 ], "end": [ -0.0225, 0.0555, 0.0 ] } } ] }, { "id": "f_016", "name": "Plane7", "atomic_id": "reference_plane", "depends_on": [ "f_015" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_008" }, "execution_status": "deferred" }, { "id": "f_017", "name": "Cut-Extrude3", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_016", "f_005" ], "params": { "distance_mm": 1.0, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_008" }, { "id": "f_018", "name": "Plane8", "atomic_id": "reference_plane", "depends_on": [ "f_017" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_009" }, "execution_status": "deferred" }, { "id": "f_019", "name": "Cut-Revolve2", "atomic_id": "revolve_cut", "depends_on": [ "f_018", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ 22.5, 61.0, 0.0 ], "direction": [ 0.0, -1.0, 0.0 ] }, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_009", "selectors": [ { "kind": "axis", "stable_id": "eeaa54906f07475989607e56febb573045befe4f2c3037a1ca8c87611be9da81", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ 0.0225, 0.061, 0.0 ], "end": [ 0.0225, 0.0555, 0.0 ] } } ] }, { "id": "f_020", "name": "Plane9", "atomic_id": "reference_plane", "depends_on": [ "f_019" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_010" }, "execution_status": "deferred" }, { "id": "f_021", "name": "Cut-Extrude4", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_020", "f_005" ], "params": { "distance_mm": 1.0, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_010" }, { "id": "f_022", "name": "Plane10", "atomic_id": "reference_plane", "depends_on": [ "f_021" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_011" }, "execution_status": "deferred" }, { "id": "f_023", "name": "Cut-Revolve3", "atomic_id": "revolve_cut", "depends_on": [ "f_022", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ -19.0, 22.0, 0.0 ], "direction": [ 0.0, -1.0, 0.0 ] }, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_011", "selectors": [ { "kind": "axis", "stable_id": "c2d009a1abb28e9cd4903e6503c887e24a0d9f2fd94a75b8593042ce3d3d6e44", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ -0.019, 0.022, 0.0 ], "end": [ -0.019, 0.0165, 0.0 ] } } ] }, { "id": "f_024", "name": "Plane11", "atomic_id": "reference_plane", "depends_on": [ "f_023" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_012" }, "execution_status": "deferred" }, { "id": "f_025", "name": "Cut-Revolve4", "atomic_id": "revolve_cut", "depends_on": [ "f_024", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ 19.0, 22.0, 0.0 ], "direction": [ 0.0, -1.0, 0.0 ] }, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_012", "selectors": [ { "kind": "axis", "stable_id": "4c9945c158ce88cc1cc5ba0986fba41cd1b9c55bd42534f5b31f06fac202ca05", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ 0.019, 0.022, 0.0 ], "end": [ 0.019, 0.0165, 0.0 ] } } ] }, { "id": "f_026", "name": "Plane12", "atomic_id": "reference_plane", "depends_on": [ "f_025" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_013" }, "execution_status": "deferred" }, { "id": "f_027", "name": "Cut-Extrude5", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_026", "f_005" ], "params": { "distance_mm": 1.0, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_013" }, { "id": "f_028", "name": "Plane13", "atomic_id": "reference_plane", "depends_on": [ "f_027" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_014" }, "execution_status": "deferred" }, { "id": "f_029", "name": "Cut-Extrude6", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_028", "f_005" ], "params": { "distance_mm": 1.0, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_014" }, { "id": "f_030", "name": "Plane14", "atomic_id": "reference_plane", "depends_on": [ "f_029" ], "params": { "plane": { "origin_mm": [ 60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_015" }, "execution_status": "deferred" }, { "id": "f_031", "name": "Cut-Revolve5", "atomic_id": "revolve_cut", "depends_on": [ "f_030", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ -360.0, 39.0, 0.0 ], "direction": [ 0.0, -1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_015", "selectors": [ { "kind": "axis", "stable_id": "4f5f7f120b99ca35883555c26291ade67ef378bdf0b9239c951f395c4bc36b42", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ -0.36, 0.039, 0.0 ], "end": [ -0.36, 0.0, 0.0 ] } } ] }, { "id": "f_032", "name": "Plane15", "atomic_id": "reference_plane", "depends_on": [ "f_031" ], "params": { "plane": { "origin_mm": [ -60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_016" }, "execution_status": "deferred" }, { "id": "f_033", "name": "Cut-Revolve6", "atomic_id": "revolve_cut", "depends_on": [ "f_032", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ -360.0, 39.0, 0.0 ], "direction": [ 0.0, -1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_016", "selectors": [ { "kind": "axis", "stable_id": "57fd452e894a94f90153e7383a7598363bd9e9734d4671f72c0eef6cf29fb798", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ -0.36, 0.039, 0.0 ], "end": [ -0.36, 0.0, 0.0 ] } } ] }, { "id": "f_034", "name": "Plane16", "atomic_id": "reference_plane", "depends_on": [ "f_033" ], "params": { "plane": { "origin_mm": [ -60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_017" }, "execution_status": "deferred" }, { "id": "f_035", "name": "Cut-Revolve7", "atomic_id": "revolve_cut", "depends_on": [ "f_034", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ -240.0, 39.0, 0.0 ], "direction": [ 0.0, -1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_017", "selectors": [ { "kind": "axis", "stable_id": "c6994ba9d05ec2e802240079f6caa8296914a83839953d9bb0534d31a7473ef3", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ -0.24, 0.039, 0.0 ], "end": [ -0.24, 0.0, 0.0 ] } } ] }, { "id": "f_036", "name": "Plane17", "atomic_id": "reference_plane", "depends_on": [ "f_035" ], "params": { "plane": { "origin_mm": [ 60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_018" }, "execution_status": "deferred" }, { "id": "f_037", "name": "Cut-Revolve8", "atomic_id": "revolve_cut", "depends_on": [ "f_036", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ -240.0, 39.0, 0.0 ], "direction": [ 0.0, -1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_018", "selectors": [ { "kind": "axis", "stable_id": "c9591351544b475fa92d1a89fafc19dbc0c70ec40b63de8cff90c74aa1a47696", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ -0.24, 0.039, 0.0 ], "end": [ -0.24, 0.0, 0.0 ] } } ] }, { "id": "f_038", "name": "Plane18", "atomic_id": "reference_plane", "depends_on": [ "f_037" ], "params": { "plane": { "origin_mm": [ -60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_019" }, "execution_status": "deferred" }, { "id": "f_039", "name": "Cut-Revolve9", "atomic_id": "revolve_cut", "depends_on": [ "f_038", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ -120.0, 39.0, 0.0 ], "direction": [ 0.0, -1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_019", "selectors": [ { "kind": "axis", "stable_id": "d21e7245555416553ca907c924811c30afcc9e0f626ee689d4cc450c14efdfda", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ -0.12, 0.039, 0.0 ], "end": [ -0.12, 0.0, 0.0 ] } } ] }, { "id": "f_040", "name": "Plane19", "atomic_id": "reference_plane", "depends_on": [ "f_039" ], "params": { "plane": { "origin_mm": [ 60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_020" }, "execution_status": "deferred" }, { "id": "f_041", "name": "Cut-Revolve10", "atomic_id": "revolve_cut", "depends_on": [ "f_040", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ -120.0, 39.0, 0.0 ], "direction": [ 0.0, -1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_020", "selectors": [ { "kind": "axis", "stable_id": "9d04bc13eee37b2165428a4f40b3fd9ce13227ee6ff5525d64174181dcd5fa2d", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ -0.12, 0.039, 0.0 ], "end": [ -0.12, 0.0, 0.0 ] } } ] }, { "id": "f_042", "name": "Plane20", "atomic_id": "reference_plane", "depends_on": [ "f_041" ], "params": { "plane": { "origin_mm": [ -60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_021" }, "execution_status": "deferred" }, { "id": "f_043", "name": "Cut-Revolve11", "atomic_id": "revolve_cut", "depends_on": [ "f_042", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ 0.0, 39.0, 0.0 ], "direction": [ 0.0, -1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_021", "selectors": [ { "kind": "axis", "stable_id": "5579507bc0f614d8d29a4db5b8b1273e83e49752559c2612d2d4bd609d47aac7", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ 0.0, 0.039, 0.0 ], "end": [ 0.0, 0.0, 0.0 ] } } ] }, { "id": "f_044", "name": "Plane21", "atomic_id": "reference_plane", "depends_on": [ "f_043" ], "params": { "plane": { "origin_mm": [ 60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_022" }, "execution_status": "deferred" }, { "id": "f_045", "name": "Cut-Revolve12", "atomic_id": "revolve_cut", "depends_on": [ "f_044", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ 0.0, 39.0, 0.0 ], "direction": [ 0.0, -1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_022", "selectors": [ { "kind": "axis", "stable_id": "cffa13b2a5296446ed40238afe55e774ebb0d969e47edc283aea266617ec877c", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ 0.0, 0.039, 0.0 ], "end": [ 0.0, 0.0, 0.0 ] } } ] }, { "id": "f_046", "name": "Plane22", "atomic_id": "reference_plane", "depends_on": [ "f_045" ], "params": { "plane": { "origin_mm": [ -60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_023" }, "execution_status": "deferred" }, { "id": "f_047", "name": "Cut-Revolve13", "atomic_id": "revolve_cut", "depends_on": [ "f_046", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ 120.0, 39.0, 0.0 ], "direction": [ 0.0, -1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_023", "selectors": [ { "kind": "axis", "stable_id": "2b635b4ca1ec2c748518f9076c3b34ec13280f9dc2a05c2dc4931f8d31aedef1", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ 0.12, 0.039, 0.0 ], "end": [ 0.12, 0.0, 0.0 ] } } ] }, { "id": "f_048", "name": "Plane23", "atomic_id": "reference_plane", "depends_on": [ "f_047" ], "params": { "plane": { "origin_mm": [ 60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_024" }, "execution_status": "deferred" }, { "id": "f_049", "name": "Cut-Revolve14", "atomic_id": "revolve_cut", "depends_on": [ "f_048", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ 120.0, 39.0, 0.0 ], "direction": [ 0.0, -1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_024", "selectors": [ { "kind": "axis", "stable_id": "ff0f9eb03da6af7eb60d6d8659a1b650b04ef7611516419fed0af1e30b9cd7fa", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ 0.12, 0.039, 0.0 ], "end": [ 0.12, 0.0, 0.0 ] } } ] }, { "id": "f_050", "name": "Plane24", "atomic_id": "reference_plane", "depends_on": [ "f_049" ], "params": { "plane": { "origin_mm": [ -60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_025" }, "execution_status": "deferred" }, { "id": "f_051", "name": "Cut-Revolve15", "atomic_id": "revolve_cut", "depends_on": [ "f_050", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ 240.0, 39.0, 0.0 ], "direction": [ 0.0, -1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_025", "selectors": [ { "kind": "axis", "stable_id": "11e1960f1672dab7cf0735c8298d31ad15fe50825ed73c71dca4c29fe6dace29", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ 0.24, 0.039, 0.0 ], "end": [ 0.24, 0.0, 0.0 ] } } ] }, { "id": "f_052", "name": "Plane25", "atomic_id": "reference_plane", "depends_on": [ "f_051" ], "params": { "plane": { "origin_mm": [ 60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_026" }, "execution_status": "deferred" }, { "id": "f_053", "name": "Cut-Revolve16", "atomic_id": "revolve_cut", "depends_on": [ "f_052", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ 240.0, 39.0, 0.0 ], "direction": [ 0.0, -1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_026", "selectors": [ { "kind": "axis", "stable_id": "1f8ae7e66de7ec1c7d997ad5b97dc132ed1bd7276012820efd36bb5f6d7e2668", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ 0.24, 0.039, 0.0 ], "end": [ 0.24, 0.0, 0.0 ] } } ] }, { "id": "f_054", "name": "Plane26", "atomic_id": "reference_plane", "depends_on": [ "f_053" ], "params": { "plane": { "origin_mm": [ -60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_027" }, "execution_status": "deferred" }, { "id": "f_055", "name": "Cut-Revolve17", "atomic_id": "revolve_cut", "depends_on": [ "f_054", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ 360.0, 39.0, 0.0 ], "direction": [ 0.0, -1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_027", "selectors": [ { "kind": "axis", "stable_id": "8f33f1a54b592d6220e94d39b10056b8ac8e29ea325853c9c92ba2fc6989c2b5", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ 0.36, 0.039, 0.0 ], "end": [ 0.36, 0.0, 0.0 ] } } ] }, { "id": "f_056", "name": "Plane27", "atomic_id": "reference_plane", "depends_on": [ "f_055" ], "params": { "plane": { "origin_mm": [ 60.0, -0.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 1.0, 0.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_028" }, "execution_status": "deferred" }, { "id": "f_057", "name": "Cut-Revolve18", "atomic_id": "revolve_cut", "depends_on": [ "f_056", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ 360.0, 39.0, 0.0 ], "direction": [ 0.0, -1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_028", "selectors": [ { "kind": "axis", "stable_id": "1211f95dfbbbbd9649b2f8f0e07b4e95ec8595919aea8577c4704708312ef729", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ 0.36, 0.039, 0.0 ], "end": [ 0.36, 0.0, 0.0 ] } } ] }, { "id": "f_058", "name": "Plane28", "atomic_id": "reference_plane", "depends_on": [ "f_057" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_029" }, "execution_status": "deferred" }, { "id": "f_059", "name": "Boss-Extrude4", "atomic_id": "extrude_add_two_sided", "depends_on": [ "f_058", "f_005" ], "params": { "distance_mm": 7.5, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 }, "reverse_distance_mm": 7.5, "reverse_end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_029" }, { "id": "f_060", "name": "Plane29", "atomic_id": "reference_plane", "depends_on": [ "f_059" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_030" }, "execution_status": "deferred" }, { "id": "f_061", "name": "Cut-Revolve19", "atomic_id": "revolve_cut", "depends_on": [ "f_060", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ -10.0, 17.0, 0.0 ], "direction": [ 0.0, -1.0, 0.0 ] }, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_030", "selectors": [ { "kind": "axis", "stable_id": "bd02237821d55a5bdb135d63eb0d73e4dc851799540bf946ff5227a42c2ca848", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ -0.01, 0.017, 0.0 ], "end": [ -0.01, 0.0115, 0.0 ] } } ] }, { "id": "f_062", "name": "Plane30", "atomic_id": "reference_plane", "depends_on": [ "f_061" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_031" }, "execution_status": "deferred" }, { "id": "f_063", "name": "Cut-Revolve20", "atomic_id": "revolve_cut", "depends_on": [ "f_062", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ 10.0, 17.0, 0.0 ], "direction": [ 0.0, -1.0, 0.0 ] }, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_031", "selectors": [ { "kind": "axis", "stable_id": "0d50de111ef579eae1bbd0e7425571cabfde0c70b35a9dac3fa006fc08e086c8", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ 0.01, 0.017, 0.0 ], "end": [ 0.01, 0.0115, 0.0 ] } } ] }, { "id": "f_064", "name": "Plane31", "atomic_id": "reference_plane", "depends_on": [ "f_063" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_032" }, "execution_status": "deferred" }, { "id": "f_065", "name": "Cut-Extrude7", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_064", "f_005" ], "params": { "distance_mm": 1.0, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_032" }, { "id": "f_066", "name": "Plane32", "atomic_id": "reference_plane", "depends_on": [ "f_065" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_033" }, "execution_status": "deferred" }, { "id": "f_067", "name": "Cut-Extrude8", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_066", "f_005" ], "params": { "distance_mm": 1.0, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_033" }, { "id": "f_068", "name": "Plane33", "atomic_id": "reference_plane", "depends_on": [ "f_067" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_034" }, "execution_status": "deferred" }, { "id": "f_069", "name": "Cut-Extrude9", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_068", "f_005" ], "params": { "distance_mm": 2.0, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 }, "reverse_distance_mm": 2.0, "reverse_end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_034" }, { "id": "f_070", "name": "Plane34", "atomic_id": "reference_plane", "depends_on": [ "f_069" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_035" }, "execution_status": "deferred" }, { "id": "f_071", "name": "Cut-Extrude10", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_070", "f_005" ], "params": { "distance_mm": 4.0, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 }, "reverse_distance_mm": 4.0, "reverse_end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_035" }, { "id": "f_072", "name": "Plane35", "atomic_id": "reference_plane", "depends_on": [ "f_071" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_036" }, "execution_status": "deferred" }, { "id": "f_073", "name": "Revolve1", "atomic_id": "revolve_add", "depends_on": [ "f_072", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ -76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_036", "selectors": [ { "kind": "axis", "stable_id": "f41096f8ff1e3e791f80152dfb32e2bd84fb0a5f35c9e80b07cf2dc8e1572c17", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ -0.076, 0.039, 0.0 ], "end": [ -0.076, 0.051, 0.0 ] } } ] }, { "id": "f_074", "name": "Plane36", "atomic_id": "reference_plane", "depends_on": [ "f_073" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_037" }, "execution_status": "deferred" }, { "id": "f_075", "name": "Revolve2", "atomic_id": "revolve_add", "depends_on": [ "f_074", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ 76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_037", "selectors": [ { "kind": "axis", "stable_id": "daceabfd982b689c16dd96c745b860edbdfe851f55db554efc72a0650a1f03fa", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ 0.076, 0.039, 0.0 ], "end": [ 0.076, 0.051, 0.0 ] } } ] }, { "id": "f_076", "name": "Plane37", "atomic_id": "reference_plane", "depends_on": [ "f_075" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_038" }, "execution_status": "deferred" }, { "id": "f_077", "name": "Revolve3", "atomic_id": "revolve_add", "depends_on": [ "f_076", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ -76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_038", "selectors": [ { "kind": "axis", "stable_id": "d2434dc8e608c1578bf01daac11565a9d03007dca28213ea0bd08afc896c999b", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ -0.076, 0.039, 0.0 ], "end": [ -0.076, 0.051, 0.0 ] } } ] }, { "id": "f_078", "name": "Plane38", "atomic_id": "reference_plane", "depends_on": [ "f_077" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_039" }, "execution_status": "deferred" }, { "id": "f_079", "name": "Revolve4", "atomic_id": "revolve_add", "depends_on": [ "f_078", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ 76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_039", "selectors": [ { "kind": "axis", "stable_id": "f9a6282f2b6e735129b045d58094d7e05fd905a0f93483927c5fa540015f1ea0", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ 0.076, 0.039, 0.0 ], "end": [ 0.076, 0.051, 0.0 ] } } ] }, { "id": "f_080", "name": "Plane39", "atomic_id": "reference_plane", "depends_on": [ "f_079" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_040" }, "execution_status": "deferred" }, { "id": "f_081", "name": "Revolve5", "atomic_id": "revolve_add", "depends_on": [ "f_080", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ -76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_040", "selectors": [ { "kind": "axis", "stable_id": "3615511afbdfb2c79a7f91d25a55a2f413c183d12bfc616e4fc061bb3f7a8e78", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ -0.076, 0.039, 0.0 ], "end": [ -0.076, 0.051, 0.0 ] } } ] }, { "id": "f_082", "name": "Plane40", "atomic_id": "reference_plane", "depends_on": [ "f_081" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_041" }, "execution_status": "deferred" }, { "id": "f_083", "name": "Revolve6", "atomic_id": "revolve_add", "depends_on": [ "f_082", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ 76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_041", "selectors": [ { "kind": "axis", "stable_id": "5d56c6f232ce951c7c7a2b04b6b40180920618de94e2090a9cf6e7c28deed9c5", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ 0.076, 0.039, 0.0 ], "end": [ 0.076, 0.051, 0.0 ] } } ] }, { "id": "f_084", "name": "Plane41", "atomic_id": "reference_plane", "depends_on": [ "f_083" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_042" }, "execution_status": "deferred" }, { "id": "f_085", "name": "Revolve7", "atomic_id": "revolve_add", "depends_on": [ "f_084", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ -76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_042", "selectors": [ { "kind": "axis", "stable_id": "298059a78116122bad7fd7bf405c8d1f0b72912deb912171279f10cf7bc2f731", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ -0.076, 0.039, 0.0 ], "end": [ -0.076, 0.051, 0.0 ] } } ] }, { "id": "f_086", "name": "Plane42", "atomic_id": "reference_plane", "depends_on": [ "f_085" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_043" }, "execution_status": "deferred" }, { "id": "f_087", "name": "Revolve8", "atomic_id": "revolve_add", "depends_on": [ "f_086", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ 76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_043", "selectors": [ { "kind": "axis", "stable_id": "e5d4fdc61ed6902181a552ea3c24c245ce62e8b019c34addf4412715d20381de", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ 0.076, 0.039, 0.0 ], "end": [ 0.076, 0.051, 0.0 ] } } ] }, { "id": "f_088", "name": "Plane43", "atomic_id": "reference_plane", "depends_on": [ "f_087" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_044" }, "execution_status": "deferred" }, { "id": "f_089", "name": "Revolve9", "atomic_id": "revolve_add", "depends_on": [ "f_088", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ -76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_044", "selectors": [ { "kind": "axis", "stable_id": "707699e72136fc4294952829d113d8a8af90ffaeaeb552d49bc87026e0772b11", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ -0.076, 0.039, 0.0 ], "end": [ -0.076, 0.051, 0.0 ] } } ] }, { "id": "f_090", "name": "Plane44", "atomic_id": "reference_plane", "depends_on": [ "f_089" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_045" }, "execution_status": "deferred" }, { "id": "f_091", "name": "Revolve10", "atomic_id": "revolve_add", "depends_on": [ "f_090", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ 76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_045", "selectors": [ { "kind": "axis", "stable_id": "5c367963c900c5c535cec82141cfde72facdee13ca0261f70e8e826e391defba", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ 0.076, 0.039, 0.0 ], "end": [ 0.076, 0.051, 0.0 ] } } ] }, { "id": "f_092", "name": "Plane45", "atomic_id": "reference_plane", "depends_on": [ "f_091" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_046" }, "execution_status": "deferred" }, { "id": "f_093", "name": "Revolve11", "atomic_id": "revolve_add", "depends_on": [ "f_092", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ -76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_046", "selectors": [ { "kind": "axis", "stable_id": "22cb1271b7a35cb9ce793de9f9d10c1b7afa36809273014420ede95b045380ae", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ -0.076, 0.039, 0.0 ], "end": [ -0.076, 0.051, 0.0 ] } } ] }, { "id": "f_094", "name": "Plane46", "atomic_id": "reference_plane", "depends_on": [ "f_093" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_047" }, "execution_status": "deferred" }, { "id": "f_095", "name": "Revolve12", "atomic_id": "revolve_add", "depends_on": [ "f_094", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ 76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_047", "selectors": [ { "kind": "axis", "stable_id": "37f351c67d87524a72efc742107e4bf4b5246307cb801cf0a08a5b8b7cef824a", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ 0.076, 0.039, 0.0 ], "end": [ 0.076, 0.051, 0.0 ] } } ] }, { "id": "f_096", "name": "Plane47", "atomic_id": "reference_plane", "depends_on": [ "f_095" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_048" }, "execution_status": "deferred" }, { "id": "f_097", "name": "Revolve13", "atomic_id": "revolve_add", "depends_on": [ "f_096", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ -76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_048", "selectors": [ { "kind": "axis", "stable_id": "1cf4067d89030b8487a006b9a4c3c71ab0d0349a934238f076ca6814611b1b25", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ -0.076, 0.039, 0.0 ], "end": [ -0.076, 0.051, 0.0 ] } } ] }, { "id": "f_098", "name": "Plane48", "atomic_id": "reference_plane", "depends_on": [ "f_097" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_049" }, "execution_status": "deferred" }, { "id": "f_099", "name": "Revolve14", "atomic_id": "revolve_add", "depends_on": [ "f_098", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ 76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_049", "selectors": [ { "kind": "axis", "stable_id": "8ef0da29034b2ff12121538f3306466b403f843273a06f53ec9ca8a40dd39008", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ 0.076, 0.039, 0.0 ], "end": [ 0.076, 0.051, 0.0 ] } } ] }, { "id": "f_100", "name": "Plane49", "atomic_id": "reference_plane", "depends_on": [ "f_099" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_050" }, "execution_status": "deferred" }, { "id": "f_101", "name": "Revolve15", "atomic_id": "revolve_add", "depends_on": [ "f_100", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ -76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_050", "selectors": [ { "kind": "axis", "stable_id": "9f76ffb6ad43c627fc09d80e8fae0db59c76408a9c885af51d59725dc8c9739b", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ -0.076, 0.039, 0.0 ], "end": [ -0.076, 0.051, 0.0 ] } } ] }, { "id": "f_102", "name": "Plane50", "atomic_id": "reference_plane", "depends_on": [ "f_101" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_051" }, "execution_status": "deferred" }, { "id": "f_103", "name": "Revolve16", "atomic_id": "revolve_add", "depends_on": [ "f_102", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ 76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_051", "selectors": [ { "kind": "axis", "stable_id": "300c483a705a420bdd93afffe3d2f48d02ca235d8b2c7479a13c5d3a8eb89049", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ 0.076, 0.039, 0.0 ], "end": [ 0.076, 0.051, 0.0 ] } } ] }, { "id": "f_104", "name": "Plane51", "atomic_id": "reference_plane", "depends_on": [ "f_103" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_052" }, "execution_status": "deferred" }, { "id": "f_105", "name": "Revolve17", "atomic_id": "revolve_add", "depends_on": [ "f_104", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ -76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_052", "selectors": [ { "kind": "axis", "stable_id": "5f0da9a0343df7747c6c8887b395ba8b861eb4505ae13ac8daf17d2d307e06c6", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ -0.076, 0.039, 0.0 ], "end": [ -0.076, 0.051, 0.0 ] } } ] }, { "id": "f_106", "name": "Plane52", "atomic_id": "reference_plane", "depends_on": [ "f_105" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_053" }, "execution_status": "deferred" }, { "id": "f_107", "name": "Revolve18", "atomic_id": "revolve_add", "depends_on": [ "f_106", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ 76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_053", "selectors": [ { "kind": "axis", "stable_id": "40a055cf34d1ca591524370dec8dbce94805d0ca04437b1bcd8ca97697bf17f1", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ 0.076, 0.039, 0.0 ], "end": [ 0.076, 0.051, 0.0 ] } } ] }, { "id": "f_108", "name": "Plane53", "atomic_id": "reference_plane", "depends_on": [ "f_107" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_054" }, "execution_status": "deferred" }, { "id": "f_109", "name": "Revolve19", "atomic_id": "revolve_add", "depends_on": [ "f_108", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ -76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_054", "selectors": [ { "kind": "axis", "stable_id": "f3640996c94a3b9072a7892f7d27f45f2ad943d3b013bfcbf6744e0d02fcf02f", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ -0.076, 0.039, 0.0 ], "end": [ -0.076, 0.051, 0.0 ] } } ] }, { "id": "f_110", "name": "Plane54", "atomic_id": "reference_plane", "depends_on": [ "f_109" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_055" }, "execution_status": "deferred" }, { "id": "f_111", "name": "Revolve20", "atomic_id": "revolve_add", "depends_on": [ "f_110", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ 76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_055", "selectors": [ { "kind": "axis", "stable_id": "dad23652d505ad0be091011a62c10a584896cbf74744dd7caee018357b5e8113", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ 0.076, 0.039, 0.0 ], "end": [ 0.076, 0.051, 0.0 ] } } ] }, { "id": "f_112", "name": "Plane55", "atomic_id": "reference_plane", "depends_on": [ "f_111" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_056" }, "execution_status": "deferred" }, { "id": "f_113", "name": "Revolve21", "atomic_id": "revolve_add", "depends_on": [ "f_112", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ -76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_056", "selectors": [ { "kind": "axis", "stable_id": "644dfed2014dacaa2c6b1f9bbdc76e92f9383414d11637338017eae123301620", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ -0.076, 0.039, 0.0 ], "end": [ -0.076, 0.051, 0.0 ] } } ] }, { "id": "f_114", "name": "Plane56", "atomic_id": "reference_plane", "depends_on": [ "f_113" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_057" }, "execution_status": "deferred" }, { "id": "f_115", "name": "Revolve22", "atomic_id": "revolve_add", "depends_on": [ "f_114", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ 76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_057", "selectors": [ { "kind": "axis", "stable_id": "77e0e94ca04018d77a26c467f8cba9a0808a48f746f4c3ccef4cb9400b1894f6", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ 0.076, 0.039, 0.0 ], "end": [ 0.076, 0.051, 0.0 ] } } ] }, { "id": "f_116", "name": "Plane57", "atomic_id": "reference_plane", "depends_on": [ "f_115" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_058" }, "execution_status": "deferred" }, { "id": "f_117", "name": "Revolve23", "atomic_id": "revolve_add", "depends_on": [ "f_116", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ -76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_058", "selectors": [ { "kind": "axis", "stable_id": "7e301f65120146bce004213a90cfafe36b70389e6a260767bdbadba0049a73f1", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ -0.076, 0.039, 0.0 ], "end": [ -0.076, 0.051, 0.0 ] } } ] }, { "id": "f_118", "name": "Plane58", "atomic_id": "reference_plane", "depends_on": [ "f_117" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_059" }, "execution_status": "deferred" }, { "id": "f_119", "name": "Revolve24", "atomic_id": "revolve_add", "depends_on": [ "f_118", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ 76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_059", "selectors": [ { "kind": "axis", "stable_id": "4d2e4254a1200e87581d571d38eb438364295fe5b3b1ac727ddbb886a5dd3b83", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ 0.076, 0.039, 0.0 ], "end": [ 0.076, 0.051, 0.0 ] } } ] }, { "id": "f_120", "name": "Plane59", "atomic_id": "reference_plane", "depends_on": [ "f_119" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_060" }, "execution_status": "deferred" }, { "id": "f_121", "name": "Revolve25", "atomic_id": "revolve_add", "depends_on": [ "f_120", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ -76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_060", "selectors": [ { "kind": "axis", "stable_id": "55f0d3d1805d424bf2d2c52e6dcdfbb26fd9d05d81e51fb0d312bd1e5bcebbdc", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ -0.076, 0.039, 0.0 ], "end": [ -0.076, 0.051, 0.0 ] } } ] }, { "id": "f_122", "name": "Plane60", "atomic_id": "reference_plane", "depends_on": [ "f_121" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_061" }, "execution_status": "deferred" }, { "id": "f_123", "name": "Revolve26", "atomic_id": "revolve_add", "depends_on": [ "f_122", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ 76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_061", "selectors": [ { "kind": "axis", "stable_id": "3a8d106d88dedb86d972ad172889fc9426ed5a89e979ce052ff447a91f27cf13", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ 0.076, 0.039, 0.0 ], "end": [ 0.076, 0.051, 0.0 ] } } ] }, { "id": "f_124", "name": "Plane61", "atomic_id": "reference_plane", "depends_on": [ "f_123" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_062" }, "execution_status": "deferred" }, { "id": "f_125", "name": "Revolve27", "atomic_id": "revolve_add", "depends_on": [ "f_124", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ -76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_062", "selectors": [ { "kind": "axis", "stable_id": "a290edb8467ef12c6dc18a70a9b00c46b0e5324474f7ffeb87dd9957e001fd01", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ -0.076, 0.039, 0.0 ], "end": [ -0.076, 0.051, 0.0 ] } } ] }, { "id": "f_126", "name": "Plane62", "atomic_id": "reference_plane", "depends_on": [ "f_125" ], "params": { "plane": { "origin_mm": [ -0.0, -0.0, -0.0 ], "x_dir": [ 0.0, 0.0, 1.0 ], "y_dir": [ 0.707106781, 0.0, -0.707106781 ], "normal": [ -0.0, 1.0, 0.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_063" }, "execution_status": "deferred" }, { "id": "f_127", "name": "Revolve28", "atomic_id": "revolve_add", "depends_on": [ "f_126", "f_005" ], "params": { "angle_deg": 360.0, "axis": { "origin_mm": [ 76.0, 39.0, 0.0 ], "direction": [ 0.0, 1.0, 0.0 ] }, "reverse": true, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_063", "selectors": [ { "kind": "axis", "stable_id": "5d1c1605b8c433af36bff38758e1cab313ec63474867c306cd17f60598dfdeb2", "source": "solidworks", "confidence": 1.0, "geometry": { "start": [ 0.076, 0.039, 0.0 ], "end": [ 0.076, 0.051, 0.0 ] } } ] }, { "id": "f_128", "name": "Plane63", "atomic_id": "reference_plane", "depends_on": [ "f_127" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_064" }, "execution_status": "deferred" }, { "id": "f_129", "name": "Cut-Extrude11", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_128", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_064" }, { "id": "f_130", "name": "Plane64", "atomic_id": "reference_plane", "depends_on": [ "f_129" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_065" }, "execution_status": "deferred" }, { "id": "f_131", "name": "Cut-Extrude12", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_130", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_065" }, { "id": "f_132", "name": "Plane65", "atomic_id": "reference_plane", "depends_on": [ "f_131" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_066" }, "execution_status": "deferred" }, { "id": "f_133", "name": "Cut-Extrude13", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_132", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_066" }, { "id": "f_134", "name": "Plane66", "atomic_id": "reference_plane", "depends_on": [ "f_133" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_067" }, "execution_status": "deferred" }, { "id": "f_135", "name": "Cut-Extrude14", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_134", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_067" }, { "id": "f_136", "name": "Plane67", "atomic_id": "reference_plane", "depends_on": [ "f_135" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_068" }, "execution_status": "deferred" }, { "id": "f_137", "name": "Cut-Extrude15", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_136", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_068" }, { "id": "f_138", "name": "Plane68", "atomic_id": "reference_plane", "depends_on": [ "f_137" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_069" }, "execution_status": "deferred" }, { "id": "f_139", "name": "Cut-Extrude16", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_138", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_069" }, { "id": "f_140", "name": "Plane69", "atomic_id": "reference_plane", "depends_on": [ "f_139" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_070" }, "execution_status": "deferred" }, { "id": "f_141", "name": "Cut-Extrude17", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_140", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_070" }, { "id": "f_142", "name": "Plane70", "atomic_id": "reference_plane", "depends_on": [ "f_141" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_071" }, "execution_status": "deferred" }, { "id": "f_143", "name": "Cut-Extrude18", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_142", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_071" }, { "id": "f_144", "name": "Plane71", "atomic_id": "reference_plane", "depends_on": [ "f_143" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_072" }, "execution_status": "deferred" }, { "id": "f_145", "name": "Cut-Extrude19", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_144", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_072" }, { "id": "f_146", "name": "Plane72", "atomic_id": "reference_plane", "depends_on": [ "f_145" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_073" }, "execution_status": "deferred" }, { "id": "f_147", "name": "Cut-Extrude20", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_146", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_073" }, { "id": "f_148", "name": "Plane73", "atomic_id": "reference_plane", "depends_on": [ "f_147" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_074" }, "execution_status": "deferred" }, { "id": "f_149", "name": "Cut-Extrude21", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_148", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_074" }, { "id": "f_150", "name": "Plane74", "atomic_id": "reference_plane", "depends_on": [ "f_149" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_075" }, "execution_status": "deferred" }, { "id": "f_151", "name": "Cut-Extrude22", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_150", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_075" }, { "id": "f_152", "name": "Plane75", "atomic_id": "reference_plane", "depends_on": [ "f_151" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_076" }, "execution_status": "deferred" }, { "id": "f_153", "name": "Cut-Extrude23", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_152", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_076" }, { "id": "f_154", "name": "Plane76", "atomic_id": "reference_plane", "depends_on": [ "f_153" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_077" }, "execution_status": "deferred" }, { "id": "f_155", "name": "Cut-Extrude24", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_154", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_077" }, { "id": "f_156", "name": "Plane77", "atomic_id": "reference_plane", "depends_on": [ "f_155" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_078" }, "execution_status": "deferred" }, { "id": "f_157", "name": "Cut-Extrude25", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_156", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_078" }, { "id": "f_158", "name": "Plane78", "atomic_id": "reference_plane", "depends_on": [ "f_157" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_079" }, "execution_status": "deferred" }, { "id": "f_159", "name": "Cut-Extrude26", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_158", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_079" }, { "id": "f_160", "name": "Plane79", "atomic_id": "reference_plane", "depends_on": [ "f_159" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_080" }, "execution_status": "deferred" }, { "id": "f_161", "name": "Cut-Extrude27", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_160", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_080" }, { "id": "f_162", "name": "Plane80", "atomic_id": "reference_plane", "depends_on": [ "f_161" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_081" }, "execution_status": "deferred" }, { "id": "f_163", "name": "Cut-Extrude28", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_162", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_081" }, { "id": "f_164", "name": "Plane81", "atomic_id": "reference_plane", "depends_on": [ "f_163" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_082" }, "execution_status": "deferred" }, { "id": "f_165", "name": "Cut-Extrude29", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_164", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_082" }, { "id": "f_166", "name": "Plane82", "atomic_id": "reference_plane", "depends_on": [ "f_165" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_083" }, "execution_status": "deferred" }, { "id": "f_167", "name": "Cut-Extrude30", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_166", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_083" }, { "id": "f_168", "name": "Plane83", "atomic_id": "reference_plane", "depends_on": [ "f_167" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_084" }, "execution_status": "deferred" }, { "id": "f_169", "name": "Cut-Extrude31", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_168", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_084" }, { "id": "f_170", "name": "Plane84", "atomic_id": "reference_plane", "depends_on": [ "f_169" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_085" }, "execution_status": "deferred" }, { "id": "f_171", "name": "Cut-Extrude32", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_170", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_085" }, { "id": "f_172", "name": "Plane85", "atomic_id": "reference_plane", "depends_on": [ "f_171" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_086" }, "execution_status": "deferred" }, { "id": "f_173", "name": "Cut-Extrude33", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_172", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_086" }, { "id": "f_174", "name": "Plane86", "atomic_id": "reference_plane", "depends_on": [ "f_173" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_087" }, "execution_status": "deferred" }, { "id": "f_175", "name": "Cut-Extrude34", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_174", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_087" }, { "id": "f_176", "name": "Plane87", "atomic_id": "reference_plane", "depends_on": [ "f_175" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_088" }, "execution_status": "deferred" }, { "id": "f_177", "name": "Cut-Extrude35", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_176", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_088" }, { "id": "f_178", "name": "Plane88", "atomic_id": "reference_plane", "depends_on": [ "f_177" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_089" }, "execution_status": "deferred" }, { "id": "f_179", "name": "Cut-Extrude36", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_178", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_089" }, { "id": "f_180", "name": "Plane89", "atomic_id": "reference_plane", "depends_on": [ "f_179" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_090" }, "execution_status": "deferred" }, { "id": "f_181", "name": "Cut-Extrude37", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_180", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_090" }, { "id": "f_182", "name": "Plane90", "atomic_id": "reference_plane", "depends_on": [ "f_181" ], "params": { "plane": { "origin_mm": [ -0.0, 1000.0, -0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "offset_mm": 0.0, "angle_rad": 0.0, "reverse": false, "solidworks_type": -1, "derived_from_sketch_id": "sk_091" }, "execution_status": "deferred" }, { "id": "f_183", "name": "Cut-Extrude38", "atomic_id": "extrude_cut_blind", "depends_on": [ "f_182", "f_005" ], "params": { "distance_mm": 2.5, "reverse": false, "end_condition": { "type": "blind", "solidworks_code": 0 } }, "execution_status": "deferred", "sketch_id": "sk_091" } ], "meta": { "unit": "mm", "source": "01_紧固件/0102_螺钉/010299_通用螺钉/KUT2020L-820-200-B1_b.solidworks_evidence_v2.json", "source_schema": "solidworks.cad_evidence.v2", "source_status": "hybrid_semantic_surfaceir_pending", "document_truth": { "mass_properties": { "available": true, "mass": 27.49488516515169, "volume": 0.0035707643071625573, "surface_area": 0.4916380010396883, "center_of_mass": [ -0.005804194649451858, 0.015506588225642914, 1.7532012122352686e-17 ], "principal_moments": [ 0.1293381446353202, 1.5586466658881193, 1.680538475169346 ], "principal_axes": null, "moment_of_inertia": null }, "geometry": { "bounding_box": [ -0.41, 0.0, -0.0975, 0.41, 0.061, 0.0975 ], "solid_body_count": 1, "bodies": [ { "kind": "body", "dotnet_type": "System.__ComObject", "name": "Cut-Extrude38", "persist_reference_base64": "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", "persist_reference_sha256": "3dfe7210df303db75783862e798d4bf4ac0b0c52ed449034e837beb4104eb123", "component": null, "geometry": { "box": [ -0.41, 0.0, -0.0975, 0.41, 0.061, 0.0975 ], "face_count": 509, "edge_count": 1092, "vertex_count": 608 }, "stable_id": "3dfe7210df303db75783862e798d4bf4ac0b0c52ed449034e837beb4104eb123" } ] } }, "step_inference": { "available": true, "face_count": 607, "surface_counts": { "cylinder": 199, "plane": 408 }, "axis_count": 199, "repeat_spacings_mm": [ { "spacing_mm": 120.0, "pair_count": 43 }, { "spacing_mm": 240.0, "pair_count": 30 }, { "spacing_mm": 139.2695, "pair_count": 28 }, { "spacing_mm": 34.0, "pair_count": 28 }, { "spacing_mm": 60.0, "pair_count": 27 }, { "spacing_mm": 163.4136, "pair_count": 26 }, { "spacing_mm": 193.6595, "pair_count": 24 }, { "spacing_mm": 360.0, "pair_count": 24 }, { "spacing_mm": 202.4747, "pair_count": 24 }, { "spacing_mm": 150.8509, "pair_count": 24 }, { "spacing_mm": 163.0828, "pair_count": 24 }, { "spacing_mm": 91.4112, "pair_count": 24 } ], "metrics": { "bounding_box_mm": [ -410.0, -0.0, -97.5, 410.0, 61.0, 97.5 ], "volume_mm3": 3570764.307162544, "surface_area_mm2": 491638.001039689, "solid_count": 1, "face_count": 607, "edge_count": 1497, "vertex_count": 998 }, "error": null, "truth_comparison": { "expected_from_evidence": { "bounding_box_mm": [ -410.0, 0.0, -97.5, 410.0, 61.0, 97.5 ], "volume_mm3": 3570764.307162557, "surface_area_mm2": 491638.001039688, "solid_count": 1, "face_count": 509, "edge_count": 1092, "vertex_count": 608 }, "comparisons": { "volume_mm3": { "expected": 3570764.307162557, "actual": 3570764.307162544, "absolute_delta": 1.257285475730896e-08, "within_tolerance": true }, "surface_area_mm2": { "expected": 491638.001039688, "actual": 491638.001039689, "absolute_delta": 9.89530235528946e-10, "within_tolerance": true }, "bounding_box_mm": { "expected": [ -410.0, 0.0, -97.5, 410.0, 61.0, 97.5 ], "actual": [ -410.0, -0.0, -97.5, 410.0, 61.0, 97.5 ], "max_absolute_delta": 0.0, "within_tolerance": true }, "solid_count": { "expected": 1, "actual": 1, "matches": true }, "face_count": { "expected": 509, "actual": 607, "matches": false }, "edge_count": { "expected": 1092, "actual": 1497, "matches": false }, "vertex_count": { "expected": 608, "actual": 998, "matches": false } }, "numeric_geometry_match": true, "topology_counts_match": false } }, "source_has_modeling_features": true } }