61 lines
1.9 KiB
JSON
61 lines
1.9 KiB
JSON
{
|
|
"items": [
|
|
{
|
|
"acceptance_claims": [
|
|
{
|
|
"claim_kind": "solid_count_equals",
|
|
"expected": {
|
|
"value": 1
|
|
}
|
|
},
|
|
{
|
|
"claim_kind": "single_connected_body",
|
|
"expected": {}
|
|
}
|
|
],
|
|
"assumptions": [
|
|
"Use millimetre units throughout.",
|
|
"Treat the reinforcing rib as integral to the base, not a separate fastened part.",
|
|
"Use reasonable default dimensions consistent with a compact mounting plate."
|
|
],
|
|
"draft_id": "draft_001",
|
|
"source_ids": [
|
|
"src_001"
|
|
],
|
|
"statement": "Create one connected mounting plate model in millimetres with a rectangular base and an integral vertical reinforcing rib. Assume a base about 120 mm by 80 mm by 10 mm, with a rib about 80 mm long, 8 mm thick, and 20 mm high, all fused into a single part."
|
|
},
|
|
{
|
|
"acceptance_claims": [
|
|
{
|
|
"claim_kind": "through_cylindrical_bore",
|
|
"expected": {
|
|
"count": 4,
|
|
"diameter_mm": 8,
|
|
"tolerance_mm": 0.2
|
|
}
|
|
},
|
|
{
|
|
"claim_kind": "circular_hole_pattern",
|
|
"expected": {
|
|
"count": 4,
|
|
"diameter_mm": 8,
|
|
"pitch_radius_mm": 70,
|
|
"tolerance_mm": 0.5
|
|
}
|
|
}
|
|
],
|
|
"assumptions": [
|
|
"Use a centered circular four-hole pattern as the interpretation of equally spaced mounting holes.",
|
|
"Make the holes through all solid material."
|
|
],
|
|
"draft_id": "draft_002",
|
|
"source_ids": [
|
|
"src_001"
|
|
],
|
|
"statement": "Add four equally spaced mounting through holes to the plate. Assume the holes are 8 mm diameter and arranged symmetrically on a 70 mm pitch radius so the pattern is centered on the base and remains within the rectangular outline."
|
|
}
|
|
],
|
|
"revision": 1,
|
|
"schema_version": "cad.requirements-draft.v1"
|
|
}
|