55 lines
34 KiB
JSON
55 lines
34 KiB
JSON
{"at":"2026-08-31 17:04:46","draft_path":"documents/requirements-draft-v1-bc72719cb1bf-cad_00dba826e3ab_inv_623c6a97f5f.json","draft_revision":1,"event":"requirements_draft_updated","invocation_id":"cad_00dba826e3ab_inv_623c6a97f5f9efc6","item_count":1,"schema_version":"cad.action-ledger.v1","sequence":11}
|
|
{"at":"2026-08-31 17:04:50","draft_revision":1,"event":"requirements_review_requested","invocation_id":"cad_00dba826e3ab_inv_177eaeeaf1ab402c","schema_version":"cad.action-ledger.v1","sequence":12}
|
|
{"at":"2026-08-31 17:04:57","contract_hash":"21efa926c3ff35ddb250f9cc7ffa96d8fd407d260490a77ee040b7b1aab3d796","contract_path":"documents/requirements-contract-86175c7ca58d-cad_00dba826e3ab_inv_909cc48020d.json","event":"requirements_contract_frozen","invocation_id":"cad_00dba826e3ab_inv_909cc48020d462cb","requirement_count":1,"review_path":"documents/requirements-review-95c3c7c2c161-cad_00dba826e3ab_inv_909cc48020d.json","schema_version":"cad.action-ledger.v1","sequence":13}
|
|
{"action_id":"act_004","at":"2026-08-31 17:05:03","atomic_id":"extrude_add_blind","contract_hash":"fa9ffc9fd2141453fa18a389813dde2e2ef3fb4c7ef5d05e61d51d614309e95f","event":"proposed","expected_change":"Create a solid cylindrical flange blank with outer diameter 120 mm and thickness 12 mm from the root sketch/face.","intent":"Establish the primary flange body before adding the center bore and bolt circle holes.","requirement_ids":["req_001"],"schema_version":"cad.action-ledger.v1","sequence":14,"working_head":"cad_00dba826e3ab:root:v3"}
|
|
{"action_id":"act_004","at":"2026-08-31 17:05:11","candidate_id":"candidate_56854919c88222c1","event":"candidate_building","fragment_hash":"42e5f584756f0283adbe86374edc29bc966d7166d2190894637fff231e0c769f","schema_version":"cad.action-ledger.v1","sequence":15,"stage_id":"stage_56854919c88222c1a4dd"}
|
|
{"action_id":"act_004","at":"2026-08-31 17:05:12","candidate_id":"candidate_56854919c88222c1","claim_results":[{"claim_id":"claim_001","claim_kind":"bbox_dimension_mm","deterministic":true,"evidence":{"actual_mm":120.0,"axis":"x","tolerance_mm":0.1},"status":"pass"},{"claim_id":"claim_002","claim_kind":"bbox_dimension_mm","deterministic":true,"evidence":{"actual_mm":120.0,"axis":"y","tolerance_mm":0.1},"status":"pass"},{"claim_id":"claim_003","claim_kind":"bbox_dimension_mm","deterministic":true,"evidence":{"actual_mm":12.0,"axis":"z","tolerance_mm":0.1},"status":"pass"},{"claim_id":"claim_004","claim_kind":"through_cylindrical_bore","deterministic":true,"evidence":{"reason":"the target bore has not been introduced at this checkpoint"},"status":"pending"},{"claim_id":"claim_005","claim_kind":"circular_hole_pattern","deterministic":true,"evidence":{"reason":"the target hole pattern has not been introduced at this checkpoint"},"status":"pending"}],"event":"candidate_built","schema_version":"cad.action-ledger.v1","sequence":16}
|
|
{"action_id":"act_004","actual_atomic_id":"extrude_add_blind","at":"2026-08-31 17:05:23","candidate_id":"candidate_56854919c88222c1","coverage":[{"claim_id":"claim_001","claim_kind":"bbox_dimension_mm","deterministic":true,"evidence":{"actual_mm":120.0,"axis":"x","tolerance_mm":0.1},"status":"pass"},{"claim_id":"claim_002","claim_kind":"bbox_dimension_mm","deterministic":true,"evidence":{"actual_mm":120.0,"axis":"y","tolerance_mm":0.1},"status":"pass"},{"claim_id":"claim_003","claim_kind":"bbox_dimension_mm","deterministic":true,"evidence":{"actual_mm":12.0,"axis":"z","tolerance_mm":0.1},"status":"pass"},{"claim_id":"claim_004","claim_kind":"through_cylindrical_bore","deterministic":true,"evidence":{"reason":"the target bore has not been introduced at this checkpoint"},"status":"pending"},{"claim_id":"claim_005","claim_kind":"circular_hole_pattern","deterministic":true,"evidence":{"reason":"the target hole pattern has not been introduced at this checkpoint"},"status":"pending"}],"event":"accepted","fragment_hash":"42e5f584756f0283adbe86374edc29bc966d7166d2190894637fff231e0c769f","parent_revision":"","review_path":"revisions/rev_001/candidate-review.json","revision_id":"rev_001","schema_version":"cad.action-ledger.v1","selector_snapshot_id":"","sequence":17,"working_head_before":"cad_00dba826e3ab:root:v3"}
|
|
{"action_id":"act_008","at":"2026-08-31 17:05:31","atomic_id":"hole_blind","contract_hash":"f62e12603feeca6d7e83acdab651fcb023e08a46c39fd1509e9dcb81d4f0c721","event":"proposed","expected_change":"Add a centered through hole of diameter 40 mm that passes through the full 12 mm flange thickness.","intent":"Introduce the central bore required before verifying the bolt-circle hole pattern.","requirement_ids":["req_001"],"schema_version":"cad.action-ledger.v1","sequence":18,"working_head":"cad_00dba826e3ab:rev_001:v7"}
|
|
{"action_id":"act_008","at":"2026-08-31 17:05:51","candidate_id":"candidate_70172626283fc723","event":"candidate_building","fragment_hash":"8dbdf76b626adaf2a0ade7eacde1cf3ef37143aea59310eeadee2ed94a0caab5","schema_version":"cad.action-ledger.v1","sequence":19,"stage_id":"stage_70172626283fc723504c"}
|
|
{"action_id":"act_008","at":"2026-08-31 17:05:53","candidate_id":"candidate_70172626283fc723","claim_results":[{"claim_id":"claim_001","claim_kind":"bbox_dimension_mm","deterministic":true,"evidence":{"actual_mm":120.00000000000014,"axis":"x","tolerance_mm":0.1},"status":"pass"},{"claim_id":"claim_002","claim_kind":"bbox_dimension_mm","deterministic":true,"evidence":{"actual_mm":120.00000000000009,"axis":"y","tolerance_mm":0.1},"status":"pass"},{"claim_id":"claim_003","claim_kind":"bbox_dimension_mm","deterministic":true,"evidence":{"actual_mm":12.0,"axis":"z","tolerance_mm":0.1},"status":"pass"},{"claim_id":"claim_004","claim_kind":"through_cylindrical_bore","deterministic":true,"evidence":{"through_bores":["body:feature_002:face:2"]},"status":"pass"},{"claim_id":"claim_005","claim_kind":"circular_hole_pattern","deterministic":true,"evidence":{"reason":"the target hole pattern has not been introduced at this checkpoint"},"status":"pending"}],"event":"candidate_built","schema_version":"cad.action-ledger.v1","sequence":20}
|
|
{"action_id":"act_008","actual_atomic_id":"hole_blind","at":"2026-08-31 17:06:02","candidate_id":"candidate_70172626283fc723","coverage":[{"claim_id":"claim_001","claim_kind":"bbox_dimension_mm","deterministic":true,"evidence":{"actual_mm":120.00000000000014,"axis":"x","tolerance_mm":0.1},"status":"pass"},{"claim_id":"claim_002","claim_kind":"bbox_dimension_mm","deterministic":true,"evidence":{"actual_mm":120.00000000000009,"axis":"y","tolerance_mm":0.1},"status":"pass"},{"claim_id":"claim_003","claim_kind":"bbox_dimension_mm","deterministic":true,"evidence":{"actual_mm":12.0,"axis":"z","tolerance_mm":0.1},"status":"pass"},{"claim_id":"claim_004","claim_kind":"through_cylindrical_bore","deterministic":true,"evidence":{"through_bores":["body:feature_002:face:2"]},"status":"pass"},{"claim_id":"claim_005","claim_kind":"circular_hole_pattern","deterministic":true,"evidence":{"reason":"the target hole pattern has not been introduced at this checkpoint"},"status":"pending"}],"event":"accepted","fragment_hash":"8dbdf76b626adaf2a0ade7eacde1cf3ef37143aea59310eeadee2ed94a0caab5","parent_revision":"rev_001","review_path":"revisions/rev_002/candidate-review.json","revision_id":"rev_002","schema_version":"cad.action-ledger.v1","selector_snapshot_id":"cad_00dba826e3ab/candidate_56854919c88222c1","sequence":21,"working_head_before":"cad_00dba826e3ab:rev_001:v7"}
|
|
{"action_id":"act_012","at":"2026-08-31 17:06:14","atomic_id":"pattern_linear","contract_hash":"ecf393713de82ac30ca326719774ed8315030d9d980d1370c95003505ce28471","event":"proposed","expected_change":"Replicate the existing 8 mm through-hole feature into a 6-instance pattern positioned on the 90 mm pitch circle so the flange gains the required evenly spaced bolt holes.","intent":"Introduce the bolt-circle hole set needed to satisfy the remaining circular hole pattern requirement.","requirement_ids":["req_001"],"schema_version":"cad.action-ledger.v1","sequence":22,"working_head":"cad_00dba826e3ab:rev_002:v11"}
|
|
{"action_id":"act_012","at":"2026-08-31 17:06:32","candidate_id":"candidate_c26bb3b8c86db8d5","event":"candidate_building","fragment_hash":"edaba856dc323b8f0ba75bfd07e283f38ecf4ad97d79921a2a6c0b1434276c5e","schema_version":"cad.action-ledger.v1","sequence":23,"stage_id":"stage_c26bb3b8c86db8d51640"}
|
|
{"at":"2026-08-31 17:06:32","candidate_id":"candidate_c26bb3b8c86db8d5","event":"candidate_build_failed","message":"CANDIDATE_BUILD_FAILED: No runtime topology record satisfies the selector","schema_version":"cad.action-ledger.v1","sequence":24,"stage_id":"stage_c26bb3b8c86db8d51640"}
|
|
{"at":"2026-08-31 17:06:47","corrective_intent":"Re-select an action for the 6x 8 mm bolt-circle hole pattern on the 90 mm pitch circle.","decision":"return_to_action_selection","event":"geometry_conclusion","evidence_refs":["evidence_current_state","evidence_current_model","evidence_current_claims","evidence_ledger_24"],"root_cause":"The prior pattern action failed because no runtime topology record satisfied the selector, so the candidate build could not bind the hole-pattern feature on the current revision.","schema_version":"cad.action-ledger.v1","sequence":25,"working_head":"cad_00dba826e3ab:rev_002:v15","working_head_before":"cad_00dba826e3ab:rev_002:v14"}
|
|
{"action_id":"act_016","at":"2026-08-31 17:06:59","atomic_id":"pattern_linear","contract_hash":"ecf393713de82ac30ca326719774ed8315030d9d980d1370c95003505ce28471","event":"proposed","expected_change":"Replicate the existing 8 mm through-hole feature into 6 evenly spaced instances on the 90 mm pitch circle so the flange gains the required bolt-hole pattern.","intent":"Satisfy the remaining circular hole pattern requirement by adding the 6x 8 mm bolt-circle holes.","requirement_ids":["req_001"],"schema_version":"cad.action-ledger.v1","sequence":26,"working_head":"cad_00dba826e3ab:rev_002:v15"}
|
|
{"at":"2026-08-31 17:07:09","corrective_intent":"Re-select an action that can bind the 6x 8 mm hole pattern on the 90 mm pitch circle from the current revision state.","decision":"return_to_action_selection","event":"geometry_conclusion","evidence_refs":["evidence_current_state","evidence_current_model","evidence_current_claims","evidence_ledger_24"],"root_cause":"The prior bolt-hole pattern candidate failed because no runtime topology record satisfied the selector on the current revision, so the 6x 8 mm circular pattern still needs a fresh action selection.","schema_version":"cad.action-ledger.v1","sequence":27,"working_head":"cad_00dba826e3ab:rev_002:v17","working_head_before":"cad_00dba826e3ab:rev_002:v16"}
|
|
{"action_id":"act_018","at":"2026-08-31 17:07:15","atomic_id":"pattern_linear","contract_hash":"ecf393713de82ac30ca326719774ed8315030d9d980d1370c95003505ce28471","event":"proposed","expected_change":"Create 6 evenly spaced 8 mm through holes on the 90 mm pitch circle around the flange center.","intent":"Complete the remaining bolt-circle hole pattern requirement on the current flange revision.","requirement_ids":["req_001"],"schema_version":"cad.action-ledger.v1","sequence":28,"working_head":"cad_00dba826e3ab:rev_002:v17"}
|
|
{"at":"2026-08-31 17:07:24","corrective_intent":"Re-select an action that can bind the 6x 8 mm through-hole pattern on the 90 mm pitch circle from the current revision state.","decision":"return_to_action_selection","event":"geometry_conclusion","evidence_refs":["evidence_current_state","evidence_current_model","evidence_current_claims","evidence_ledger_24"],"root_cause":"The bolt-circle hole-pattern requirement is still pending and the current revision shows no completed 6x 8 mm pattern feature bound in runtime topology, so a fresh action selection is needed to finish claim_005.","schema_version":"cad.action-ledger.v1","sequence":29,"working_head":"cad_00dba826e3ab:rev_002:v19","working_head_before":"cad_00dba826e3ab:rev_002:v18"}
|
|
{"action_id":"act_020","at":"2026-08-31 17:07:29","atomic_id":"pattern_linear","contract_hash":"ecf393713de82ac30ca326719774ed8315030d9d980d1370c95003505ce28471","event":"proposed","expected_change":"Add 6 evenly spaced 8 mm through holes on the 90 mm pitch circle to complete the bolt-circle pattern on the flange.","intent":"Finish the remaining circular hole pattern requirement on the current flange revision.","requirement_ids":["req_001"],"schema_version":"cad.action-ledger.v1","sequence":30,"working_head":"cad_00dba826e3ab:rev_002:v19"}
|
|
{"at":"2026-08-31 17:07:39","corrective_intent":"Re-select an action that can bind the 6x 8 mm through-hole pattern on the 90 mm pitch circle from the current revision state.","decision":"return_to_action_selection","event":"geometry_conclusion","evidence_refs":["evidence_current_state","evidence_current_model","evidence_current_claims","evidence_ledger_24"],"root_cause":"The flange body and bore claims are satisfied, but the 6x 8 mm bolt-circle hole pattern is still pending and no current topology record binds that pattern on the 90 mm pitch circle.","schema_version":"cad.action-ledger.v1","sequence":31,"working_head":"cad_00dba826e3ab:rev_002:v21","working_head_before":"cad_00dba826e3ab:rev_002:v20"}
|
|
{"action_id":"act_022","at":"2026-08-31 17:07:45","atomic_id":"pattern_linear","contract_hash":"ecf393713de82ac30ca326719774ed8315030d9d980d1370c95003505ce28471","event":"proposed","expected_change":"Create 6 evenly spaced 8 mm through holes on the 90 mm pitch circle around the flange center.","intent":"Complete the remaining circular hole pattern requirement on the current flange revision.","requirement_ids":["req_001"],"schema_version":"cad.action-ledger.v1","sequence":32,"working_head":"cad_00dba826e3ab:rev_002:v21"}
|
|
{"at":"2026-08-31 17:07:55","corrective_intent":"Re-select an action that can bind the 6x 8 mm through-hole pattern on the 90 mm pitch circle from the current revision state.","decision":"return_to_action_selection","event":"geometry_conclusion","evidence_refs":["evidence_current_state","evidence_current_model","evidence_current_claims","evidence_ledger_24"],"root_cause":"The flange body and center bore are already satisfied, but the 6x 8 mm hole pattern on the 90 mm pitch circle is still not bound in the current topology, so the remaining requirement needs a fresh action selection.","schema_version":"cad.action-ledger.v1","sequence":33,"working_head":"cad_00dba826e3ab:rev_002:v23","working_head_before":"cad_00dba826e3ab:rev_002:v22"}
|
|
{"action_id":"act_024","at":"2026-08-31 17:08:01","atomic_id":"pattern_linear","contract_hash":"ecf393713de82ac30ca326719774ed8315030d9d980d1370c95003505ce28471","event":"proposed","expected_change":"Add 6 evenly spaced 8 mm through holes on the 90 mm pitch circle to complete the bolt-circle pattern on the flange.","intent":"Finish the remaining circular hole pattern requirement on the current flange revision.","requirement_ids":["req_001"],"schema_version":"cad.action-ledger.v1","sequence":34,"working_head":"cad_00dba826e3ab:rev_002:v23"}
|
|
{"at":"2026-08-31 17:08:09","corrective_intent":"Re-select an action that can bind the 6x 8 mm through-hole pattern on the 90 mm pitch circle from the current revision state.","decision":"return_to_action_selection","event":"geometry_conclusion","evidence_refs":["evidence_current_state","evidence_current_model","evidence_current_claims","evidence_ledger_24"],"root_cause":"The flange body and center bore are satisfied, but the 6x 8 mm hole pattern on the 90 mm pitch circle is still not bound in the current topology, so the remaining requirement needs a fresh action selection.","schema_version":"cad.action-ledger.v1","sequence":35,"working_head":"cad_00dba826e3ab:rev_002:v25","working_head_before":"cad_00dba826e3ab:rev_002:v24"}
|
|
{"action_id":"act_026","at":"2026-08-31 17:08:19","atomic_id":"pattern_linear","contract_hash":"ecf393713de82ac30ca326719774ed8315030d9d980d1370c95003505ce28471","event":"proposed","expected_change":"Add 6 evenly spaced 8 mm through holes on the 90 mm pitch circle around the flange center.","intent":"Complete the remaining circular hole pattern requirement on the current flange revision.","requirement_ids":["req_001"],"schema_version":"cad.action-ledger.v1","sequence":36,"working_head":"cad_00dba826e3ab:rev_002:v25"}
|
|
{"at":"2026-08-31 17:08:27","corrective_intent":"Re-select an action that can bind the 6x 8 mm through-hole pattern on the 90 mm pitch circle from the current revision state.","decision":"return_to_action_selection","event":"geometry_conclusion","evidence_refs":["evidence_current_state","evidence_current_model","evidence_current_claims","evidence_ledger_24"],"root_cause":"The flange body and center bore are satisfied, but the 6x 8 mm hole pattern on the 90 mm pitch circle is still not bound in the current topology, so the remaining requirement needs a fresh action selection.","schema_version":"cad.action-ledger.v1","sequence":37,"working_head":"cad_00dba826e3ab:rev_002:v27","working_head_before":"cad_00dba826e3ab:rev_002:v26"}
|
|
{"action_id":"act_028","at":"2026-08-31 17:08:38","atomic_id":"hole_wizard","contract_hash":"5317c6041122063e436a01d442b7697ecf1209a09e03d2224a0a97eb40d7b012","event":"proposed","expected_change":"Create the 6x 8 mm through-hole bolt-circle feature on the 90 mm pitch circle to satisfy the remaining flange pattern requirement.","intent":"Bind the remaining circular hole pattern requirement on the current flange revision using the dedicated hole creation workflow.","requirement_ids":["req_001"],"schema_version":"cad.action-ledger.v1","sequence":38,"working_head":"cad_00dba826e3ab:rev_002:v27"}
|
|
{"at":"2026-08-31 17:08:47","corrective_intent":"Return to action selection once the opaque selector facts can be obtained.","decision":"return_to_action_selection","event":"geometry_conclusion","evidence_refs":["evidence_current_state","evidence_current_model","evidence_current_claims","evidence_ledger_24"],"root_cause":"The remaining bolt-circle hole pattern is still pending, but the required opaque topology inspection and CDLS contract lookup are not available through the provided tools, so no valid fragment can be bound from the current state.","schema_version":"cad.action-ledger.v1","sequence":39,"working_head":"cad_00dba826e3ab:rev_002:v29","working_head_before":"cad_00dba826e3ab:rev_002:v28"}
|
|
{"action_id":"act_030","at":"2026-08-31 17:08:57","atomic_id":"hole_wizard","contract_hash":"5317c6041122063e436a01d442b7697ecf1209a09e03d2224a0a97eb40d7b012","event":"proposed","expected_change":"Create 6 evenly spaced 8 mm through holes on the 90 mm pitch circle, completing the remaining bolt-circle pattern on the flange.","intent":"Bind the remaining circular hole pattern requirement on the current flange revision using the dedicated hole creation workflow.","requirement_ids":["req_001"],"schema_version":"cad.action-ledger.v1","sequence":40,"working_head":"cad_00dba826e3ab:rev_002:v29"}
|
|
{"at":"2026-08-31 17:09:05","corrective_intent":"Obtain the opaque topology selector and CDLS contract facts before attempting the 6x 8 mm bolt-circle fragment again.","decision":"return_to_action_selection","event":"geometry_conclusion","evidence_refs":["evidence_current_state","evidence_current_model","evidence_current_claims"],"root_cause":"The pending hole-pattern action cannot be completed from the current interface because the required topology selector and contract lookup operations are not available here, so no valid fragment can be bound yet.","schema_version":"cad.action-ledger.v1","sequence":41,"working_head":"cad_00dba826e3ab:rev_002:v31","working_head_before":"cad_00dba826e3ab:rev_002:v30"}
|
|
{"action_id":"act_032","at":"2026-08-31 17:09:11","atomic_id":"hole_wizard","contract_hash":"5317c6041122063e436a01d442b7697ecf1209a09e03d2224a0a97eb40d7b012","event":"proposed","expected_change":"Create 6 evenly spaced 8 mm through holes on the 90 mm pitch circle, completing the remaining bolt-circle pattern on the flange.","intent":"Bind the remaining circular hole pattern requirement on the current flange revision using the dedicated hole creation workflow.","requirement_ids":["req_001"],"schema_version":"cad.action-ledger.v1","sequence":42,"working_head":"cad_00dba826e3ab:rev_002:v31"}
|
|
{"at":"2026-08-31 17:09:20","corrective_intent":"Return to action selection until the selector token and contract facts are available.","decision":"return_to_action_selection","event":"geometry_conclusion","evidence_refs":["evidence_current_state","evidence_current_model","evidence_current_claims"],"root_cause":"The remaining 6x 8 mm bolt-circle feature is still pending, but the required opaque topology selector and CDLS contract facts are not available through the current tool surface, so the fragment cannot be bound from this state.","schema_version":"cad.action-ledger.v1","sequence":43,"working_head":"cad_00dba826e3ab:rev_002:v33","working_head_before":"cad_00dba826e3ab:rev_002:v32"}
|
|
{"action_id":"act_034","at":"2026-08-31 17:09:28","atomic_id":"hole_wizard","contract_hash":"5317c6041122063e436a01d442b7697ecf1209a09e03d2224a0a97eb40d7b012","event":"proposed","expected_change":"Create 6 evenly spaced 8 mm through holes on the 90 mm pitch circle to complete the flange bolt-circle pattern.","intent":"Bind the remaining circular hole pattern requirement on the current flange revision using the dedicated hole creation workflow.","requirement_ids":["req_001"],"schema_version":"cad.action-ledger.v1","sequence":44,"working_head":"cad_00dba826e3ab:rev_002:v33"}
|
|
{"at":"2026-08-31 17:09:36","corrective_intent":"Obtain the opaque selector token and contract facts before attempting the 6x 8 mm bolt-circle fragment.","decision":"return_to_action_selection","event":"geometry_conclusion","evidence_refs":["evidence_current_state","evidence_current_model","evidence_current_claims"],"root_cause":"The remaining circular hole pattern is still pending, but the required topology selector and CDLS contract facts are not available through the current tool surface, so the fragment cannot be bound from this state.","schema_version":"cad.action-ledger.v1","sequence":45,"working_head":"cad_00dba826e3ab:rev_002:v35","working_head_before":"cad_00dba826e3ab:rev_002:v34"}
|
|
{"action_id":"act_036","at":"2026-08-31 17:09:45","atomic_id":"hole_wizard","contract_hash":"5317c6041122063e436a01d442b7697ecf1209a09e03d2224a0a97eb40d7b012","event":"proposed","expected_change":"Create 6 evenly spaced 8 mm through holes on the 90 mm pitch circle, completing the flange bolt-circle pattern on the current solid.","intent":"Bind the pending circular hole pattern requirement using the dedicated hole creation workflow on the current revision.","requirement_ids":["req_001"],"schema_version":"cad.action-ledger.v1","sequence":46,"working_head":"cad_00dba826e3ab:rev_002:v35"}
|
|
{"at":"2026-08-31 17:09:54","corrective_intent":"Return to action selection because the required topology inspection and CDLS contract tools are unavailable in the current tool surface.","decision":"return_to_action_selection","event":"geometry_conclusion","evidence_refs":["evidence_current_state","evidence_current_model","evidence_current_claims"],"root_cause":"The remaining bolt-circle hole pattern is still pending, but the instructed selector and contract acquisition steps cannot be executed because only the geometry conclusion tool is available here.","schema_version":"cad.action-ledger.v1","sequence":47,"working_head":"cad_00dba826e3ab:rev_002:v37","working_head_before":"cad_00dba826e3ab:rev_002:v36"}
|
|
{"action_id":"act_038","at":"2026-08-31 17:10:00","atomic_id":"hole_wizard","contract_hash":"5317c6041122063e436a01d442b7697ecf1209a09e03d2224a0a97eb40d7b012","event":"proposed","expected_change":"Create 6 evenly spaced 8 mm through holes on the 90 mm pitch circle to complete the flange bolt-circle pattern.","intent":"Bind the remaining circular hole pattern requirement on the current flange revision using the dedicated hole creation workflow.","requirement_ids":["req_001"],"schema_version":"cad.action-ledger.v1","sequence":48,"working_head":"cad_00dba826e3ab:rev_002:v37"}
|
|
{"at":"2026-08-31 17:10:06","corrective_intent":"Return to action selection because the required topology selector and contract facts are not available in the current tool surface.","decision":"return_to_action_selection","event":"geometry_conclusion","evidence_refs":["evidence_current_state","evidence_current_model","evidence_current_claims"],"root_cause":"The bolt-circle hole pattern remains pending, but the requested inspection and contract retrieval steps cannot be executed here, so the fragment cannot be bound from the current state.","schema_version":"cad.action-ledger.v1","sequence":49,"working_head":"cad_00dba826e3ab:rev_002:v39","working_head_before":"cad_00dba826e3ab:rev_002:v38"}
|
|
{"action_id":"act_040","at":"2026-08-31 17:10:12","atomic_id":"hole_wizard","contract_hash":"5317c6041122063e436a01d442b7697ecf1209a09e03d2224a0a97eb40d7b012","event":"proposed","expected_change":"Create the remaining 6 evenly spaced 8 mm through holes on the 90 mm pitch circle, completing the flange bolt-circle pattern on the current solid.","intent":"Bind requirement req_001 by applying the dedicated hole workflow to finish the pending circular hole pattern.","requirement_ids":["req_001"],"schema_version":"cad.action-ledger.v1","sequence":50,"working_head":"cad_00dba826e3ab:rev_002:v39"}
|
|
{"at":"2026-08-31 17:10:19","corrective_intent":"Return to action selection because the required topology selector and CDLS contract retrieval steps are unavailable in the current tool surface.","decision":"return_to_action_selection","event":"geometry_conclusion","evidence_refs":["evidence_current_state","evidence_current_model","evidence_current_claims"],"root_cause":"The bolt-circle hole pattern is still pending, but the instruction requires inspect_topology and get_cdsl_operation_contract before fragment submission, and those operations cannot be performed from the available tools here.","schema_version":"cad.action-ledger.v1","sequence":51,"working_head":"cad_00dba826e3ab:rev_002:v41","working_head_before":"cad_00dba826e3ab:rev_002:v40"}
|
|
{"action_id":"act_042","at":"2026-08-31 17:10:25","atomic_id":"hole_wizard","contract_hash":"5317c6041122063e436a01d442b7697ecf1209a09e03d2224a0a97eb40d7b012","event":"proposed","expected_change":"Create 6 evenly spaced 8 mm through holes on the 90 mm pitch circle to complete the flange bolt-circle pattern.","intent":"Bind the remaining circular hole pattern requirement on the current flange revision.","requirement_ids":["req_001"],"schema_version":"cad.action-ledger.v1","sequence":52,"working_head":"cad_00dba826e3ab:rev_002:v41"}
|
|
{"at":"2026-08-31 17:10:33","corrective_intent":"Return to action selection because the required topology selector and contract facts are not available in the current tool surface.","decision":"return_to_action_selection","event":"geometry_conclusion","evidence_refs":["evidence_current_state","evidence_current_model","evidence_current_claims"],"root_cause":"The bolt-circle hole pattern remains pending, but the instruction requires inspect_topology and get_cdsl_operation_contract before fragment submission, and those operations cannot be performed from the available tools here.","schema_version":"cad.action-ledger.v1","sequence":53,"working_head":"cad_00dba826e3ab:rev_002:v43","working_head_before":"cad_00dba826e3ab:rev_002:v42"}
|
|
{"action_id":"act_044","at":"2026-08-31 17:10:39","atomic_id":"hole_wizard","contract_hash":"5317c6041122063e436a01d442b7697ecf1209a09e03d2224a0a97eb40d7b012","event":"proposed","expected_change":"Create the remaining 6 evenly spaced 8 mm through holes on the 90 mm pitch circle to complete the flange bolt-circle pattern on the current solid.","intent":"Bind req_001 by finishing the pending circular hole pattern on the existing flange body.","requirement_ids":["req_001"],"schema_version":"cad.action-ledger.v1","sequence":54,"working_head":"cad_00dba826e3ab:rev_002:v43"}
|
|
{"at":"2026-08-31 17:10:47","corrective_intent":"Return to action selection until the opaque topology selector and CDLS contract facts are available in the tool surface.","decision":"return_to_action_selection","event":"geometry_conclusion","evidence_refs":["evidence_current_state","evidence_current_model","evidence_current_claims"],"root_cause":"The flange body is still missing the bolt-circle hole pattern, but the required inspect_topology and get_cdsl_operation_contract steps cannot be executed from the available tools here, so the fragment cannot be safely submitted.","schema_version":"cad.action-ledger.v1","sequence":55,"working_head":"cad_00dba826e3ab:rev_002:v45","working_head_before":"cad_00dba826e3ab:rev_002:v44"}
|
|
{"action_id":"act_046","at":"2026-08-31 17:10:53","atomic_id":"hole_wizard","contract_hash":"5317c6041122063e436a01d442b7697ecf1209a09e03d2224a0a97eb40d7b012","event":"proposed","expected_change":"Create 6 evenly spaced 8 mm through holes on the 90 mm pitch circle to satisfy the remaining bolt-circle requirement.","intent":"Complete req_001 on the current flange body by binding the pending circular hole pattern.","requirement_ids":["req_001"],"schema_version":"cad.action-ledger.v1","sequence":56,"working_head":"cad_00dba826e3ab:rev_002:v45"}
|
|
{"at":"2026-08-31 17:11:00","corrective_intent":"Return to action selection because the required topology selector and contract facts are not available in the current tool surface.","decision":"return_to_action_selection","event":"geometry_conclusion","evidence_refs":["evidence_current_state","evidence_current_model","evidence_current_claims"],"root_cause":"The bolt-circle hole pattern remains pending, but the instruction requires inspect_topology and get_cdsl_operation_contract before fragment submission, and those operations cannot be performed from the available tools here.","schema_version":"cad.action-ledger.v1","sequence":57,"working_head":"cad_00dba826e3ab:rev_002:v47","working_head_before":"cad_00dba826e3ab:rev_002:v46"}
|
|
{"action_id":"act_048","at":"2026-08-31 17:11:06","atomic_id":"hole_wizard","contract_hash":"5317c6041122063e436a01d442b7697ecf1209a09e03d2224a0a97eb40d7b012","event":"proposed","expected_change":"Add the remaining 6 evenly spaced 8 mm through holes on the 90 mm pitch circle to complete the flange bolt-circle pattern on the existing solid.","intent":"Complete req_001 by binding the pending circular hole pattern on the current flange body.","requirement_ids":["req_001"],"schema_version":"cad.action-ledger.v1","sequence":58,"working_head":"cad_00dba826e3ab:rev_002:v47"}
|
|
{"at":"2026-08-31 17:11:16","corrective_intent":"Return to action selection until the opaque topology selector and CDLS contract facts are available.","decision":"return_to_action_selection","event":"geometry_conclusion","evidence_refs":["evidence_current_state","evidence_current_model","evidence_current_claims"],"root_cause":"The flange still has a pending bolt-circle hole pattern, but the required inspect_topology and get_cdsl_operation_contract facts cannot be obtained from the available tool surface, so the fragment cannot be safely submitted.","schema_version":"cad.action-ledger.v1","sequence":59,"working_head":"cad_00dba826e3ab:rev_002:v49","working_head_before":"cad_00dba826e3ab:rev_002:v48"}
|
|
{"action_id":"act_050","at":"2026-08-31 17:11:22","atomic_id":"hole_wizard","contract_hash":"5317c6041122063e436a01d442b7697ecf1209a09e03d2224a0a97eb40d7b012","event":"proposed","expected_change":"Add 6 evenly spaced 8 mm through holes on the 90 mm pitch circle to complete the flange bolt-circle pattern on the existing solid.","intent":"Complete req_001 by binding the remaining circular hole pattern to the current flange body.","requirement_ids":["req_001"],"schema_version":"cad.action-ledger.v1","sequence":60,"working_head":"cad_00dba826e3ab:rev_002:v49"}
|
|
{"at":"2026-08-31 17:11:29","corrective_intent":"Return to action selection until the opaque topology selector and CDLS contract facts are available.","decision":"return_to_action_selection","event":"geometry_conclusion","evidence_refs":["evidence_current_state","evidence_current_model","evidence_current_claims"],"root_cause":"The flange model still has the bolt-circle hole pattern pending, but the required topology selector and contract facts cannot be obtained from the available tool surface, so the fragment cannot be submitted safely.","schema_version":"cad.action-ledger.v1","sequence":61,"working_head":"cad_00dba826e3ab:rev_002:v51","working_head_before":"cad_00dba826e3ab:rev_002:v50"}
|
|
{"action_id":"act_052","at":"2026-08-31 17:11:35","atomic_id":"hole_wizard","contract_hash":"5317c6041122063e436a01d442b7697ecf1209a09e03d2224a0a97eb40d7b012","event":"proposed","expected_change":"Add 6 evenly spaced 8 mm through holes on the 90 mm pitch circle to complete the flange bolt-circle pattern on the existing solid.","intent":"Complete req_001 by binding the remaining circular hole pattern to the current flange body.","requirement_ids":["req_001"],"schema_version":"cad.action-ledger.v1","sequence":62,"working_head":"cad_00dba826e3ab:rev_002:v51"}
|
|
{"at":"2026-08-31 17:11:42","corrective_intent":"Return to action selection because the required topology selector and contract facts are not available through the provided tool surface.","decision":"return_to_action_selection","event":"geometry_conclusion","evidence_refs":["evidence_current_state","evidence_current_model","evidence_current_claims"],"root_cause":"The flange still has a pending bolt-circle hole pattern, but the required inspect_topology and get_cdsl_operation_contract facts cannot be obtained here, so the fragment cannot be submitted safely.","schema_version":"cad.action-ledger.v1","sequence":63,"working_head":"cad_00dba826e3ab:rev_002:v53","working_head_before":"cad_00dba826e3ab:rev_002:v52"}
|
|
{"action_id":"act_054","at":"2026-08-31 17:11:54","atomic_id":"hole_wizard","contract_hash":"5317c6041122063e436a01d442b7697ecf1209a09e03d2224a0a97eb40d7b012","event":"proposed","expected_change":"Add 6 evenly spaced 8 mm through holes on the 90 mm pitch circle to complete the flange bolt-circle pattern on the existing solid.","intent":"Complete req_001 by binding the remaining circular hole pattern to the current flange body.","requirement_ids":["req_001"],"schema_version":"cad.action-ledger.v1","sequence":64,"working_head":"cad_00dba826e3ab:rev_002:v53"}
|