diff --git a/assets/locales/pending/dialog-hints.json b/assets/locales/pending/dialog-hints.json new file mode 100644 index 000000000..4c5338542 --- /dev/null +++ b/assets/locales/pending/dialog-hints.json @@ -0,0 +1,1178 @@ +{ + "en": { + "Factor must be a positive number": "Factor must be a positive number", + "Library response is missing": "Library response is missing", + "Part length must be greater than zero and at most 2000 mm": "Part length must be greater than zero and at most 2000 mm", + "Pick a part size": "Pick a part size", + "Quantity must be at least 2": "Quantity must be at least 2", + "Select points of the sketch being edited": "Select points of the sketch being edited", + "Select the centre the pattern turns around first": "Select the centre the pattern turns around first", + "Select the curves to offset first": "Select the curves to offset first", + "Select the mirror line": "Select the mirror line", + "Select the sketch curves or points to mirror first": "Select the sketch curves or points to mirror first", + "Select the sketch curves or points to move first": "Select the sketch curves or points to move first", + "Select the sketch curves or points to pattern first": "Select the sketch curves or points to pattern first", + "Select the sketch curves or points to scale first": "Select the sketch curves or points to scale first", + "Select the sketch curves or points to transform first": "Select the sketch curves or points to transform first", + "Spacing 2 must be a non-zero number": "Spacing 2 must be a non-zero number", + "Spacing must be a non-zero number": "Spacing must be a non-zero number", + "The design changed. Reopen Change Part Size for the component.": "The design changed. Reopen Change Part Size for the component.", + "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "The direction must be an axis or a straight sketch curve that lies in the sketch plane", + "The mirror line cannot also be mirrored": "The mirror line cannot also be mirrored", + "The mirror line must be a straight curve of this sketch, not an origin axis": "The mirror line must be a straight curve of this sketch, not an origin axis", + "Type a distance or an angle to move by": "Type a distance or an angle to move by", + "`joint` must be an id or a name": "`joint` must be an id or a name", + "`params` must be an object": "`params` must be an object", + "`values` must be a list": "`values` must be a list", + "a chamfer needs a corner of exactly two lines": "a chamfer needs a corner of exactly two lines", + "a file operation is in progress": "a file operation is in progress", + "a picked curve is no longer in a sketch": "a picked curve is no longer in a sketch", + "a picked curve's sketch has not been solved": "a picked curve's sketch has not been solved", + "a picked edge has no points": "a picked edge has no points", + "a picked edge is gone": "a picked edge is gone", + "a picked edge's body is gone": "a picked edge's body is gone", + "choose a profile": "choose a profile", + "choose the cam's and the follower's joints": "choose the cam's and the follower's joints", + "choose the joints to couple": "choose the joints to couple", + "each rail's curves must be in one sketch": "each rail's curves must be in one sketch", + "feature computation ended without a result": "feature computation ended without a result", + "not a move": "not a move", + "not a number": "not a number", + "open a sketch first": "open a sketch first", + "pick a body or some of its faces": "pick a body or some of its faces", + "pick a planar face": "pick a planar face", + "pick a plane or a face as the tool": "pick a plane or a face as the tool", + "pick a size": "pick a size", + "pick edges of a body": "pick edges of a body", + "pick edges of one body": "pick edges of one body", + "pick edges of the holes to remove": "pick edges of the holes to remove", + "pick faces of one body": "pick faces of one body", + "pick faces to offset": "pick faces to offset", + "pick lines of one sketch": "pick lines of one sketch", + "pick one plane or face as the tool, or sketch curves": "pick one plane or face as the tool, or sketch curves", + "pick sections in two or more sketches": "pick sections in two or more sketches", + "pick sketch curves or edges": "pick sketch curves or edges", + "pick the face to untrim": "pick the face to untrim", + "pick what to keep": "pick what to keep", + "pick what to keep of the other surface": "pick what to keep of the other surface", + "select a direction (an axis, a sketch line or a straight edge) first": "select a direction (an axis, a sketch line or a straight edge) first", + "select a direction (an axis, a sketch line or a straight edge) for the profile to follow": "select a direction (an axis, a sketch line or a straight edge) for the profile to follow", + "select a profile, edges or sketch lines first": "select a profile, edges or sketch lines first", + "select an axis": "select an axis", + "select an axis, a straight or circular edge, or a cylinder, cone or torus face first": "select an axis, a straight or circular edge, or a cylinder, cone or torus face first", + "select bodies first": "select bodies first", + "select corner points, or the two lines of one corner": "select corner points, or the two lines of one corner", + "select one corner point, or the two lines of one corner": "select one corner point, or the two lines of one corner", + "select sheet edges first": "select sheet edges first", + "select the bend line (a sketch line) first": "select the bend line (a sketch line) first", + "select the cam's profile (a sketch profile or the cam's edges)": "select the cam's profile (a sketch profile or the cam's edges)", + "select the corner to cut first": "select the corner to cut first", + "select the corners to round first": "select the corners to round first", + "select the fixed face first (a plate's large face)": "select the fixed face first (a plate's large face)", + "select the frame sketch's lines first": "select the frame sketch's lines first", + "select the path (sketch lines across the edge)": "select the path (sketch lines across the edge)", + "select the rim face first": "select the rim face first", + "select the sheet edge first": "select the sheet edge first", + "select two components": "select two components", + "sketch is missing": "sketch is missing", + "the angle must be a number": "the angle must be a number", + "the curves must be in one sketch": "the curves must be in one sketch", + "the direction must be an axis, a sketch line or a straight edge": "the direction must be an axis, a sketch line or a straight edge", + "the duration must be a number of seconds, 0.001 or more": "the duration must be a number of seconds, 0.001 or more", + "the line's sketch is gone": "the line's sketch is gone", + "the lines must be in one sketch": "the lines must be in one sketch", + "the lines must be in one sketch, not the section's": "the lines must be in one sketch, not the section's", + "the parts library is empty": "the parts library is empty", + "the path curves must be in one other sketch": "the path curves must be in one other sketch", + "the path's sketch is gone": "the path's sketch is gone", + "the position must be a number": "the position must be a number", + "the preview failed": "the preview failed", + "the profiles and curves must be in one sketch": "the profiles and curves must be in one sketch", + "the reference face must be on the edges' body": "the reference face must be on the edges' body", + "the scale must be above 0": "the scale must be above 0", + "the section's profiles must be in one sketch": "the section's profiles must be in one sketch", + "the two origins are on the same component": "the two origins are on the same component", + "trim by sketch curves, or by one plane or face": "trim by sketch curves, or by one plane or face", + "use a positive nominal diameter and a pitch smaller than it": "use a positive nominal diameter and a pitch smaller than it", + "values must be finite numbers": "values must be finite numbers", + "values must be numbers or expressions": "values must be numbers or expressions" + }, + "ar": { + "Factor must be a positive number": "يجب أن يكون المعامل عددًا موجبًا", + "Library response is missing": "استجابة المكتبة مفقودة", + "Part length must be greater than zero and at most 2000 mm": "يجب أن يكون طول القطعة أكبر من صفر وألا يزيد على 2000 mm", + "Pick a part size": "اختر مقاسًا للقطعة", + "Quantity must be at least 2": "يجب ألا تقل الكمية عن 2", + "Select points of the sketch being edited": "حدد نقاطًا من الرسم الجاري تعديله", + "Select the centre the pattern turns around first": "حدد أولًا المركز الذي يدور النمط حوله", + "Select the curves to offset first": "حدد أولًا المنحنيات المراد إزاحتها", + "Select the mirror line": "حدد خط المرآة", + "Select the sketch curves or points to mirror first": "حدد أولًا منحنيات الرسم أو النقاط المراد عكسها", + "Select the sketch curves or points to move first": "حدد أولًا منحنيات الرسم أو النقاط المراد تحريكها", + "Select the sketch curves or points to pattern first": "حدد أولًا منحنيات الرسم أو النقاط المراد تكرارها في نمط", + "Select the sketch curves or points to scale first": "حدد أولًا منحنيات الرسم أو النقاط المراد تحجيمها", + "Select the sketch curves or points to transform first": "حدد أولًا منحنيات الرسم أو النقاط المراد تحويلها", + "Spacing 2 must be a non-zero number": "يجب أن يكون التباعد 2 عددًا غير صفري", + "Spacing must be a non-zero number": "يجب أن يكون التباعد عددًا غير صفري", + "The design changed. Reopen Change Part Size for the component.": "تغيّر التصميم. أعد فتح تغيير مقاس القطعة للمكوّن.", + "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "يجب أن يكون الاتجاه محورًا أو منحنى رسم مستقيمًا يقع في مستوى الرسم", + "The mirror line cannot also be mirrored": "لا يمكن عكس خط المرآة نفسه", + "The mirror line must be a straight curve of this sketch, not an origin axis": "يجب أن يكون خط المرآة منحنى مستقيمًا من هذا الرسم، وليس أحد محاور نقطة الأصل", + "Type a distance or an angle to move by": "اكتب مسافة أو زاوية للتحريك بها", + "`joint` must be an id or a name": "يجب أن يكون `joint` معرّفًا أو اسمًا", + "`params` must be an object": "يجب أن يكون `params` كائنًا", + "`values` must be a list": "يجب أن يكون `values` قائمة", + "a chamfer needs a corner of exactly two lines": "يحتاج الشطف إلى زاوية من خطين اثنين بالضبط", + "a file operation is in progress": "عملية ملف قيد التنفيذ", + "a picked curve is no longer in a sketch": "لم يعد المنحنى المحدد ضمن أي رسم", + "a picked curve's sketch has not been solved": "لم يُحَل رسم المنحنى المحدد بعد", + "a picked edge has no points": "لا تحتوي الحافة المحددة على نقاط", + "a picked edge is gone": "الحافة المحددة لم تعد موجودة", + "a picked edge's body is gone": "جسم الحافة المحددة لم يعد موجودًا", + "choose a profile": "اختر مقطعًا", + "choose the cam's and the follower's joints": "اختر مفصلَي الكامة والتابع", + "choose the joints to couple": "اختر المفاصل المراد ربطها", + "each rail's curves must be in one sketch": "يجب أن تكون منحنيات كل دليل في رسم واحد", + "feature computation ended without a result": "انتهى حساب الميزة دون نتيجة", + "not a move": "ليس تحريكًا", + "not a number": "ليس عددًا", + "open a sketch first": "افتح رسمًا أولًا", + "pick a body or some of its faces": "حدد جسمًا أو بعض أوجهه", + "pick a planar face": "حدد وجهًا مستويًا", + "pick a plane or a face as the tool": "حدد مستوى أو وجهًا ليكون الأداة", + "pick a size": "اختر مقاسًا", + "pick edges of a body": "حدد حوافّ جسم", + "pick edges of one body": "حدد حوافّ جسم واحد", + "pick edges of the holes to remove": "حدد حواف الثقوب المراد إزالتها", + "pick faces of one body": "حدد أوجه جسم واحد", + "pick faces to offset": "حدد الأوجه المراد إزاحتها", + "pick lines of one sketch": "حدد خطوطًا من رسم واحد", + "pick one plane or face as the tool, or sketch curves": "حدد مستوى واحدًا أو وجهًا واحدًا ليكون الأداة، أو منحنيات رسم", + "pick sections in two or more sketches": "حدد مقاطع في رسمين أو أكثر", + "pick sketch curves or edges": "حدد منحنيات رسم أو حوافّ", + "pick the face to untrim": "حدد الوجه المراد إلغاء قصه", + "pick what to keep": "حدد ما تريد الإبقاء عليه", + "pick what to keep of the other surface": "حدد ما تريد الإبقاء عليه من السطح الآخر", + "select a direction (an axis, a sketch line or a straight edge) first": "حدد أولًا اتجاهًا (محورًا أو خط رسم أو حافة مستقيمة)", + "select a direction (an axis, a sketch line or a straight edge) for the profile to follow": "حدد اتجاهًا (محورًا أو خط رسم أو حافة مستقيمة) ليتبعه المقطع", + "select a profile, edges or sketch lines first": "حدد أولًا مقطعًا أو حوافّ أو خطوط رسم", + "select an axis": "حدد محورًا", + "select an axis, a straight or circular edge, or a cylinder, cone or torus face first": "حدد أولًا محورًا أو حافة مستقيمة أو دائرية أو وجه أسطوانة أو مخروط أو طارة", + "select bodies first": "حدد الأجسام أولًا", + "select corner points, or the two lines of one corner": "حدد نقاط الزوايا، أو الخطين اللذين يكوّنان زاوية واحدة", + "select one corner point, or the two lines of one corner": "حدد نقطة زاوية واحدة، أو الخطين اللذين يكوّنان زاوية واحدة", + "select sheet edges first": "حدد حواف الصفيحة أولًا", + "select the bend line (a sketch line) first": "حدد خط الثني (خط رسم) أولًا", + "select the cam's profile (a sketch profile or the cam's edges)": "حدد مقطع الكامة (مقطع رسم أو حواف الكامة)", + "select the corner to cut first": "حدد أولًا الزاوية المراد قطعها", + "select the corners to round first": "حدد أولًا الزوايا المراد تدويرها", + "select the fixed face first (a plate's large face)": "حدد أولًا الوجه الثابت (الوجه الكبير للوح)", + "select the frame sketch's lines first": "حدد أولًا خطوط رسم الهيكل", + "select the path (sketch lines across the edge)": "حدد المسار (خطوط رسم عبر الحافة)", + "select the rim face first": "حدد وجه الإطار أولًا", + "select the sheet edge first": "حدد حافة الصفيحة أولًا", + "select two components": "حدد مكوّنين اثنين", + "sketch is missing": "الرسم مفقود", + "the angle must be a number": "يجب أن تكون الزاوية عددًا", + "the curves must be in one sketch": "يجب أن تكون المنحنيات في رسم واحد", + "the direction must be an axis, a sketch line or a straight edge": "يجب أن يكون الاتجاه محورًا أو خط رسم أو حافة مستقيمة", + "the duration must be a number of seconds, 0.001 or more": "يجب أن تكون المدة عددًا من الثواني، 0.001 أو أكثر", + "the line's sketch is gone": "رسم الخط لم يعد موجودًا", + "the lines must be in one sketch": "يجب أن تكون الخطوط في رسم واحد", + "the lines must be in one sketch, not the section's": "يجب أن تكون الخطوط في رسم واحد، غير رسم المقطع العرضي", + "the parts library is empty": "مكتبة القطع فارغة", + "the path curves must be in one other sketch": "يجب أن تكون منحنيات المسار في رسم آخر واحد", + "the path's sketch is gone": "رسم المسار لم يعد موجودًا", + "the position must be a number": "يجب أن يكون الموضع عددًا", + "the preview failed": "فشلت المعاينة", + "the profiles and curves must be in one sketch": "يجب أن تكون المقاطع والمنحنيات في رسم واحد", + "the reference face must be on the edges' body": "يجب أن يكون وجه المرجع على جسم الحواف", + "the scale must be above 0": "يجب أن يكون المقياس أكبر من 0", + "the section's profiles must be in one sketch": "يجب أن تكون مقاطع المقطع العرضي في رسم واحد", + "the two origins are on the same component": "يقع الأصلان على المكوّن نفسه", + "trim by sketch curves, or by one plane or face": "اقصّ بمنحنيات رسم، أو بمستوى واحد أو وجه واحد", + "use a positive nominal diameter and a pitch smaller than it": "استخدم قطرًا اسميًا موجبًا وخطوة أصغر منه", + "values must be finite numbers": "يجب أن تكون القيم أعدادًا منتهية", + "values must be numbers or expressions": "يجب أن تكون القيم أعدادًا أو تعابير" + }, + "de": { + "Factor must be a positive number": "Der Faktor muss eine positive Zahl sein", + "Library response is missing": "Die Antwort der Bibliothek fehlt", + "Part length must be greater than zero and at most 2000 mm": "Die Bauteillänge muss größer als null und höchstens 2000 mm sein", + "Pick a part size": "Eine Bauteilgröße wählen", + "Quantity must be at least 2": "Die Anzahl muss mindestens 2 sein", + "Select points of the sketch being edited": "Punkte der bearbeiteten Skizze auswählen", + "Select the centre the pattern turns around first": "Zuerst den Mittelpunkt auswählen, um den sich das Muster dreht", + "Select the curves to offset first": "Zuerst die zu versetzenden Kurven auswählen", + "Select the mirror line": "Die Spiegellinie auswählen", + "Select the sketch curves or points to mirror first": "Zuerst die zu spiegelnden Skizzenkurven oder -punkte auswählen", + "Select the sketch curves or points to move first": "Zuerst die zu verschiebenden Skizzenkurven oder -punkte auswählen", + "Select the sketch curves or points to pattern first": "Zuerst die Skizzenkurven oder -punkte für das Muster auswählen", + "Select the sketch curves or points to scale first": "Zuerst die zu skalierenden Skizzenkurven oder -punkte auswählen", + "Select the sketch curves or points to transform first": "Zuerst die zu transformierenden Skizzenkurven oder -punkte auswählen", + "Spacing 2 must be a non-zero number": "Abstand 2 muss eine Zahl ungleich null sein", + "Spacing must be a non-zero number": "Der Abstand muss eine Zahl ungleich null sein", + "The design changed. Reopen Change Part Size for the component.": "Das Design hat sich geändert. Bauteilgröße ändern für die Komponente erneut öffnen.", + "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "Die Richtung muss eine Achse oder eine gerade Skizzenkurve in der Skizzenebene sein", + "The mirror line cannot also be mirrored": "Die Spiegellinie kann nicht gleichzeitig gespiegelt werden", + "The mirror line must be a straight curve of this sketch, not an origin axis": "Die Spiegellinie muss eine gerade Kurve dieser Skizze sein, keine Ursprungsachse", + "Type a distance or an angle to move by": "Einen Abstand oder einen Winkel zum Verschieben eingeben", + "`joint` must be an id or a name": "`joint` muss eine ID oder ein Name sein", + "`params` must be an object": "`params` muss ein Objekt sein", + "`values` must be a list": "`values` muss eine Liste sein", + "a chamfer needs a corner of exactly two lines": "eine Abschrägung braucht eine Ecke aus genau zwei Linien", + "a file operation is in progress": "ein Dateivorgang läuft gerade", + "a picked curve is no longer in a sketch": "eine gewählte Kurve liegt in keiner Skizze mehr", + "a picked curve's sketch has not been solved": "die Skizze einer gewählten Kurve wurde nicht gelöst", + "a picked edge has no points": "eine gewählte Kante hat keine Punkte", + "a picked edge is gone": "eine gewählte Kante existiert nicht mehr", + "a picked edge's body is gone": "der Körper einer gewählten Kante existiert nicht mehr", + "choose a profile": "ein Profil wählen", + "choose the cam's and the follower's joints": "die Gelenke von Nocken und Stößel wählen", + "choose the joints to couple": "die zu koppelnden Gelenke wählen", + "each rail's curves must be in one sketch": "die Kurven jeder Führungskurve müssen in derselben Skizze liegen", + "feature computation ended without a result": "die Berechnung des Merkmals wurde ohne Ergebnis beendet", + "not a move": "keine Verschiebung", + "not a number": "keine Zahl", + "open a sketch first": "zuerst eine Skizze öffnen", + "pick a body or some of its faces": "einen Körper oder einige seiner Flächen wählen", + "pick a planar face": "eine ebene Fläche wählen", + "pick a plane or a face as the tool": "eine Ebene oder eine Fläche als Werkzeug wählen", + "pick a size": "eine Größe wählen", + "pick edges of a body": "Kanten eines Körpers wählen", + "pick edges of one body": "Kanten eines einzigen Körpers wählen", + "pick edges of the holes to remove": "die Kanten der zu entfernenden Bohrungen wählen", + "pick faces of one body": "Flächen eines einzigen Körpers wählen", + "pick faces to offset": "zu versetzende Flächen wählen", + "pick lines of one sketch": "Linien einer einzigen Skizze wählen", + "pick one plane or face as the tool, or sketch curves": "eine Ebene oder Fläche als Werkzeug wählen, oder Skizzenkurven", + "pick sections in two or more sketches": "Querschnitte in zwei oder mehr Skizzen wählen", + "pick sketch curves or edges": "Skizzenkurven oder Kanten wählen", + "pick the face to untrim": "die Fläche wählen, deren Trimmung aufgehoben werden soll", + "pick what to keep": "wählen, was behalten werden soll", + "pick what to keep of the other surface": "wählen, was vom anderen Flächenkörper behalten werden soll", + "select a direction (an axis, a sketch line or a straight edge) first": "zuerst eine Richtung auswählen (eine Achse, eine Skizzenlinie oder eine gerade Kante)", + "select a direction (an axis, a sketch line or a straight edge) for the profile to follow": "eine Richtung auswählen (eine Achse, eine Skizzenlinie oder eine gerade Kante), der das Profil folgen soll", + "select a profile, edges or sketch lines first": "zuerst ein Profil, Kanten oder Skizzenlinien auswählen", + "select an axis": "eine Achse auswählen", + "select an axis, a straight or circular edge, or a cylinder, cone or torus face first": "zuerst eine Achse, eine gerade oder kreisförmige Kante oder eine Zylinder-, Kegel- oder Torusfläche auswählen", + "select bodies first": "zuerst Körper auswählen", + "select corner points, or the two lines of one corner": "Eckpunkte oder die zwei Linien einer Ecke auswählen", + "select one corner point, or the two lines of one corner": "einen Eckpunkt oder die zwei Linien einer Ecke auswählen", + "select sheet edges first": "zuerst Blechkanten auswählen", + "select the bend line (a sketch line) first": "zuerst die Biegelinie (eine Skizzenlinie) auswählen", + "select the cam's profile (a sketch profile or the cam's edges)": "das Profil des Nockens auswählen (ein Skizzenprofil oder die Kanten des Nockens)", + "select the corner to cut first": "zuerst die abzuschrägende Ecke auswählen", + "select the corners to round first": "zuerst die zu verrundenden Ecken auswählen", + "select the fixed face first (a plate's large face)": "zuerst die feste Fläche auswählen (die große Fläche einer Platte)", + "select the frame sketch's lines first": "zuerst die Linien der Rahmenskizze auswählen", + "select the path (sketch lines across the edge)": "den Pfad auswählen (Skizzenlinien, die die Kante überqueren)", + "select the rim face first": "zuerst die Randfläche auswählen", + "select the sheet edge first": "zuerst die Blechkante auswählen", + "select two components": "zwei Komponenten auswählen", + "sketch is missing": "die Skizze fehlt", + "the angle must be a number": "der Winkel muss eine Zahl sein", + "the curves must be in one sketch": "die Kurven müssen in einer Skizze liegen", + "the direction must be an axis, a sketch line or a straight edge": "die Richtung muss eine Achse, eine Skizzenlinie oder eine gerade Kante sein", + "the duration must be a number of seconds, 0.001 or more": "die Dauer muss eine Zahl in Sekunden sein, mindestens 0.001", + "the line's sketch is gone": "die Skizze der Linie existiert nicht mehr", + "the lines must be in one sketch": "die Linien müssen in einer Skizze liegen", + "the lines must be in one sketch, not the section's": "die Linien müssen in einer Skizze liegen, nicht in der des Querschnitts", + "the parts library is empty": "die Bauteilbibliothek ist leer", + "the path curves must be in one other sketch": "die Pfadkurven müssen in einer einzigen anderen Skizze liegen", + "the path's sketch is gone": "die Skizze des Pfads existiert nicht mehr", + "the position must be a number": "die Position muss eine Zahl sein", + "the preview failed": "die Vorschau ist fehlgeschlagen", + "the profiles and curves must be in one sketch": "die Profile und Kurven müssen in einer Skizze liegen", + "the reference face must be on the edges' body": "die Referenzfläche muss auf dem Körper der Kanten liegen", + "the scale must be above 0": "der Maßstab muss größer als 0 sein", + "the section's profiles must be in one sketch": "die Profile des Querschnitts müssen in einer Skizze liegen", + "the two origins are on the same component": "die beiden Ursprünge liegen auf derselben Komponente", + "trim by sketch curves, or by one plane or face": "mit Skizzenkurven oder mit einer Ebene oder Fläche trimmen", + "use a positive nominal diameter and a pitch smaller than it": "einen positiven Nenndurchmesser und eine kleinere Steigung verwenden", + "values must be finite numbers": "Werte müssen endliche Zahlen sein", + "values must be numbers or expressions": "Werte müssen Zahlen oder Ausdrücke sein" + }, + "es": { + "Factor must be a positive number": "El factor debe ser un número positivo", + "Library response is missing": "Falta la respuesta de la biblioteca", + "Part length must be greater than zero and at most 2000 mm": "La longitud de la pieza debe ser mayor que cero y como máximo 2000 mm", + "Pick a part size": "Elige un tamaño de pieza", + "Quantity must be at least 2": "La cantidad debe ser al menos 2", + "Select points of the sketch being edited": "Selecciona puntos del boceto que se está editando", + "Select the centre the pattern turns around first": "Selecciona primero el centro alrededor del cual gira el patrón", + "Select the curves to offset first": "Selecciona primero las curvas que se van a desfasar", + "Select the mirror line": "Selecciona la línea de simetría", + "Select the sketch curves or points to mirror first": "Selecciona primero las curvas o puntos del boceto que se van a reflejar", + "Select the sketch curves or points to move first": "Selecciona primero las curvas o puntos del boceto que se van a mover", + "Select the sketch curves or points to pattern first": "Selecciona primero las curvas o puntos del boceto para el patrón", + "Select the sketch curves or points to scale first": "Selecciona primero las curvas o puntos del boceto que se van a escalar", + "Select the sketch curves or points to transform first": "Selecciona primero las curvas o puntos del boceto que se van a transformar", + "Spacing 2 must be a non-zero number": "El espaciado 2 debe ser un número distinto de cero", + "Spacing must be a non-zero number": "El espaciado debe ser un número distinto de cero", + "The design changed. Reopen Change Part Size for the component.": "El diseño ha cambiado. Vuelve a abrir Cambiar tamaño de pieza para el componente.", + "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "La dirección debe ser un eje o una curva recta del boceto que esté en el plano del boceto", + "The mirror line cannot also be mirrored": "La línea de simetría no puede reflejarse también", + "The mirror line must be a straight curve of this sketch, not an origin axis": "La línea de simetría debe ser una curva recta de este boceto, no un eje del origen", + "Type a distance or an angle to move by": "Escribe una distancia o un ángulo para mover", + "`joint` must be an id or a name": "`joint` debe ser un id o un nombre", + "`params` must be an object": "`params` debe ser un objeto", + "`values` must be a list": "`values` debe ser una lista", + "a chamfer needs a corner of exactly two lines": "un chaflán necesita una esquina de exactamente dos líneas", + "a file operation is in progress": "hay una operación de archivo en curso", + "a picked curve is no longer in a sketch": "una curva elegida ya no está en un boceto", + "a picked curve's sketch has not been solved": "el boceto de una curva elegida no se ha resuelto", + "a picked edge has no points": "una arista elegida no tiene puntos", + "a picked edge is gone": "una arista elegida ya no existe", + "a picked edge's body is gone": "el cuerpo de una arista elegida ya no existe", + "choose a profile": "elige un perfil", + "choose the cam's and the follower's joints": "elige las uniones de la leva y del seguidor", + "choose the joints to couple": "elige las uniones que acoplar", + "each rail's curves must be in one sketch": "las curvas de cada guía deben estar en un solo boceto", + "feature computation ended without a result": "el cálculo de la operación terminó sin resultado", + "not a move": "no es un movimiento", + "not a number": "no es un número", + "open a sketch first": "abre primero un boceto", + "pick a body or some of its faces": "elige un cuerpo o algunas de sus caras", + "pick a planar face": "elige una cara plana", + "pick a plane or a face as the tool": "elige un plano o una cara como herramienta", + "pick a size": "elige un tamaño", + "pick edges of a body": "elige aristas de un cuerpo", + "pick edges of one body": "elige aristas de un solo cuerpo", + "pick edges of the holes to remove": "elige las aristas de los agujeros que quitar", + "pick faces of one body": "elige caras de un solo cuerpo", + "pick faces to offset": "elige las caras que desfasar", + "pick lines of one sketch": "elige líneas de un solo boceto", + "pick one plane or face as the tool, or sketch curves": "elige un plano o una cara como herramienta, o curvas de boceto", + "pick sections in two or more sketches": "elige secciones en dos o más bocetos", + "pick sketch curves or edges": "elige curvas de boceto o aristas", + "pick the face to untrim": "elige la cara a la que quitar el recorte", + "pick what to keep": "elige qué conservar", + "pick what to keep of the other surface": "elige qué conservar de la otra superficie", + "select a direction (an axis, a sketch line or a straight edge) first": "selecciona primero una dirección (un eje, una línea de boceto o una arista recta)", + "select a direction (an axis, a sketch line or a straight edge) for the profile to follow": "selecciona una dirección (un eje, una línea de boceto o una arista recta) que seguirá el perfil", + "select a profile, edges or sketch lines first": "selecciona primero un perfil, aristas o líneas de boceto", + "select an axis": "selecciona un eje", + "select an axis, a straight or circular edge, or a cylinder, cone or torus face first": "selecciona primero un eje, una arista recta o circular, o una cara cilíndrica, cónica o toroidal", + "select bodies first": "selecciona primero cuerpos", + "select corner points, or the two lines of one corner": "selecciona puntos de esquina, o las dos líneas de una esquina", + "select one corner point, or the two lines of one corner": "selecciona un punto de esquina, o las dos líneas de una esquina", + "select sheet edges first": "selecciona primero aristas de chapa", + "select the bend line (a sketch line) first": "selecciona primero la línea de plegado (una línea de boceto)", + "select the cam's profile (a sketch profile or the cam's edges)": "selecciona el perfil de la leva (un perfil de boceto o las aristas de la leva)", + "select the corner to cut first": "selecciona primero la esquina que cortar", + "select the corners to round first": "selecciona primero las esquinas que redondear", + "select the fixed face first (a plate's large face)": "selecciona primero la cara fija (la cara grande de una placa)", + "select the frame sketch's lines first": "selecciona primero las líneas del boceto del marco", + "select the path (sketch lines across the edge)": "selecciona la trayectoria (líneas de boceto a lo largo de la arista)", + "select the rim face first": "selecciona primero la cara del borde", + "select the sheet edge first": "selecciona primero la arista de la chapa", + "select two components": "selecciona dos componentes", + "sketch is missing": "falta el boceto", + "the angle must be a number": "el ángulo debe ser un número", + "the curves must be in one sketch": "las curvas deben estar en un solo boceto", + "the direction must be an axis, a sketch line or a straight edge": "la dirección debe ser un eje, una línea de boceto o una arista recta", + "the duration must be a number of seconds, 0.001 or more": "la duración debe ser un número de segundos, 0.001 o más", + "the line's sketch is gone": "el boceto de la línea ya no existe", + "the lines must be in one sketch": "las líneas deben estar en un solo boceto", + "the lines must be in one sketch, not the section's": "las líneas deben estar en un solo boceto, no en el de la sección", + "the parts library is empty": "la biblioteca de piezas está vacía", + "the path curves must be in one other sketch": "las curvas de la trayectoria deben estar en un solo boceto distinto", + "the path's sketch is gone": "el boceto de la trayectoria ya no existe", + "the position must be a number": "la posición debe ser un número", + "the preview failed": "falló la vista previa", + "the profiles and curves must be in one sketch": "los perfiles y las curvas deben estar en un solo boceto", + "the reference face must be on the edges' body": "la cara de referencia debe estar en el cuerpo de las aristas", + "the scale must be above 0": "la escala debe ser mayor que 0", + "the section's profiles must be in one sketch": "los perfiles de la sección deben estar en un solo boceto", + "the two origins are on the same component": "los dos orígenes están en el mismo componente", + "trim by sketch curves, or by one plane or face": "recorta con curvas de boceto, o con un plano o una cara", + "use a positive nominal diameter and a pitch smaller than it": "usa un diámetro nominal positivo y un paso menor que él", + "values must be finite numbers": "los valores deben ser números finitos", + "values must be numbers or expressions": "los valores deben ser números o expresiones" + }, + "fr": { + "Factor must be a positive number": "Le facteur doit être un nombre strictement positif", + "Library response is missing": "La réponse de la bibliothèque est manquante", + "Part length must be greater than zero and at most 2000 mm": "La longueur de la pièce doit être supérieure à zéro et d'au plus 2000 mm", + "Pick a part size": "Choisir une taille de pièce", + "Quantity must be at least 2": "La quantité doit être d'au moins 2", + "Select points of the sketch being edited": "Sélectionner des points de l'esquisse en cours de modification", + "Select the centre the pattern turns around first": "Sélectionner d'abord le centre autour duquel la répétition pivote", + "Select the curves to offset first": "Sélectionner d'abord les courbes à décaler", + "Select the mirror line": "Sélectionner la ligne de symétrie", + "Select the sketch curves or points to mirror first": "Sélectionner d'abord les courbes ou points d'esquisse à symétriser", + "Select the sketch curves or points to move first": "Sélectionner d'abord les courbes ou points d'esquisse à déplacer", + "Select the sketch curves or points to pattern first": "Sélectionner d'abord les courbes ou points d'esquisse à répéter", + "Select the sketch curves or points to scale first": "Sélectionner d'abord les courbes ou points d'esquisse à mettre à l'échelle", + "Select the sketch curves or points to transform first": "Sélectionner d'abord les courbes ou points d'esquisse à transformer", + "Spacing 2 must be a non-zero number": "L'espacement 2 doit être un nombre non nul", + "Spacing must be a non-zero number": "L'espacement doit être un nombre non nul", + "The design changed. Reopen Change Part Size for the component.": "La conception a changé. Rouvrir Changer la taille de la pièce pour le composant.", + "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "La direction doit être un axe ou une courbe d'esquisse droite située dans le plan de l'esquisse", + "The mirror line cannot also be mirrored": "La ligne de symétrie ne peut pas être elle-même symétrisée", + "The mirror line must be a straight curve of this sketch, not an origin axis": "La ligne de symétrie doit être une courbe droite de cette esquisse, et non un axe de l'origine", + "Type a distance or an angle to move by": "Saisir une distance ou un angle de déplacement", + "`joint` must be an id or a name": "`joint` doit être un identifiant ou un nom", + "`params` must be an object": "`params` doit être un objet", + "`values` must be a list": "`values` doit être une liste", + "a chamfer needs a corner of exactly two lines": "un chanfrein nécessite un coin formé d'exactement deux lignes", + "a file operation is in progress": "une opération sur un fichier est en cours", + "a picked curve is no longer in a sketch": "une courbe sélectionnée ne se trouve plus dans une esquisse", + "a picked curve's sketch has not been solved": "l'esquisse d'une courbe sélectionnée n'a pas été résolue", + "a picked edge has no points": "une arête sélectionnée n'a aucun point", + "a picked edge is gone": "une arête sélectionnée n'existe plus", + "a picked edge's body is gone": "le corps d'une arête sélectionnée n'existe plus", + "choose a profile": "choisir un profilé", + "choose the cam's and the follower's joints": "choisir les liaisons de la came et du suiveur", + "choose the joints to couple": "choisir les liaisons à coupler", + "each rail's curves must be in one sketch": "les courbes de chaque rail de guidage doivent être dans une seule esquisse", + "feature computation ended without a result": "le calcul de la fonction s'est terminé sans résultat", + "not a move": "pas un déplacement", + "not a number": "pas un nombre", + "open a sketch first": "ouvrir d'abord une esquisse", + "pick a body or some of its faces": "choisir un corps ou certaines de ses faces", + "pick a planar face": "choisir une face plane", + "pick a plane or a face as the tool": "choisir un plan ou une face comme outil", + "pick a size": "choisir une taille", + "pick edges of a body": "choisir des arêtes d'un corps", + "pick edges of one body": "choisir des arêtes d'un seul corps", + "pick edges of the holes to remove": "choisir les arêtes des perçages à supprimer", + "pick faces of one body": "choisir des faces d'un seul corps", + "pick faces to offset": "choisir les faces à décaler", + "pick lines of one sketch": "choisir des lignes d'une seule esquisse", + "pick one plane or face as the tool, or sketch curves": "choisir un plan ou une face comme outil, ou des courbes d'esquisse", + "pick sections in two or more sketches": "choisir des sections dans au moins deux esquisses", + "pick sketch curves or edges": "choisir des courbes d'esquisse ou des arêtes", + "pick the face to untrim": "choisir la face dont l'ajustement doit être annulé", + "pick what to keep": "choisir ce qu'il faut conserver", + "pick what to keep of the other surface": "choisir ce qu'il faut conserver de l'autre surface", + "select a direction (an axis, a sketch line or a straight edge) first": "sélectionner d'abord une direction (un axe, une ligne d'esquisse ou une arête droite)", + "select a direction (an axis, a sketch line or a straight edge) for the profile to follow": "sélectionner une direction (un axe, une ligne d'esquisse ou une arête droite) que le profil doit suivre", + "select a profile, edges or sketch lines first": "sélectionner d'abord un profil, des arêtes ou des lignes d'esquisse", + "select an axis": "sélectionner un axe", + "select an axis, a straight or circular edge, or a cylinder, cone or torus face first": "sélectionner d'abord un axe, une arête droite ou circulaire, ou une face cylindrique, conique ou torique", + "select bodies first": "sélectionner d'abord des corps", + "select corner points, or the two lines of one corner": "sélectionner des points de coin, ou les deux lignes d'un coin", + "select one corner point, or the two lines of one corner": "sélectionner un point de coin, ou les deux lignes d'un coin", + "select sheet edges first": "sélectionner d'abord des arêtes de tôle", + "select the bend line (a sketch line) first": "sélectionner d'abord la ligne de pli (une ligne d'esquisse)", + "select the cam's profile (a sketch profile or the cam's edges)": "sélectionner le profil de la came (un profil d'esquisse ou les arêtes de la came)", + "select the corner to cut first": "sélectionner d'abord le coin à chanfreiner", + "select the corners to round first": "sélectionner d'abord les coins à arrondir", + "select the fixed face first (a plate's large face)": "sélectionner d'abord la face fixe (la grande face d'une plaque)", + "select the frame sketch's lines first": "sélectionner d'abord les lignes de l'esquisse de la structure", + "select the path (sketch lines across the edge)": "sélectionner la trajectoire (lignes d'esquisse qui traversent l'arête)", + "select the rim face first": "sélectionner d'abord la face du bord", + "select the sheet edge first": "sélectionner d'abord l'arête de la tôle", + "select two components": "sélectionner deux composants", + "sketch is missing": "l'esquisse est manquante", + "the angle must be a number": "l'angle doit être un nombre", + "the curves must be in one sketch": "les courbes doivent être dans une seule esquisse", + "the direction must be an axis, a sketch line or a straight edge": "la direction doit être un axe, une ligne d'esquisse ou une arête droite", + "the duration must be a number of seconds, 0.001 or more": "la durée doit être un nombre de secondes, d'au moins 0.001", + "the line's sketch is gone": "l'esquisse de la ligne n'existe plus", + "the lines must be in one sketch": "les lignes doivent être dans une seule esquisse", + "the lines must be in one sketch, not the section's": "les lignes doivent être dans une seule esquisse, pas celle de la section", + "the parts library is empty": "la bibliothèque de pièces est vide", + "the path curves must be in one other sketch": "les courbes de la trajectoire doivent être dans une seule autre esquisse", + "the path's sketch is gone": "l'esquisse de la trajectoire n'existe plus", + "the position must be a number": "la position doit être un nombre", + "the preview failed": "l'aperçu a échoué", + "the profiles and curves must be in one sketch": "les profils et les courbes doivent être dans une seule esquisse", + "the reference face must be on the edges' body": "la face de référence doit appartenir au corps des arêtes", + "the scale must be above 0": "l'échelle doit être supérieure à 0", + "the section's profiles must be in one sketch": "les profils de la section doivent être dans une seule esquisse", + "the two origins are on the same component": "les deux origines se trouvent sur le même composant", + "trim by sketch curves, or by one plane or face": "ajuster avec des courbes d'esquisse, ou avec un plan ou une face", + "use a positive nominal diameter and a pitch smaller than it": "utiliser un diamètre nominal positif et un pas inférieur à ce diamètre", + "values must be finite numbers": "les valeurs doivent être des nombres finis", + "values must be numbers or expressions": "les valeurs doivent être des nombres ou des expressions" + }, + "he": { + "Factor must be a positive number": "המקדם חייב להיות מספר חיובי", + "Library response is missing": "תגובת הספרייה חסרה", + "Part length must be greater than zero and at most 2000 mm": "אורך החלק חייב להיות גדול מאפס ולא יותר מ־2000 mm", + "Pick a part size": "יש לבחור גודל לחלק", + "Quantity must be at least 2": "הכמות חייבת להיות 2 לפחות", + "Select points of the sketch being edited": "יש לבחור נקודות של הסקיצה הנערכת", + "Select the centre the pattern turns around first": "יש לבחור תחילה את המרכז שסביבו המערך מסתובב", + "Select the curves to offset first": "יש לבחור תחילה את העקומות להיסט", + "Select the mirror line": "יש לבחור את קו השיקוף", + "Select the sketch curves or points to mirror first": "יש לבחור תחילה את עקומות הסקיצה או הנקודות לשיקוף", + "Select the sketch curves or points to move first": "יש לבחור תחילה את עקומות הסקיצה או הנקודות להזזה", + "Select the sketch curves or points to pattern first": "יש לבחור תחילה את עקומות הסקיצה או הנקודות למערך", + "Select the sketch curves or points to scale first": "יש לבחור תחילה את עקומות הסקיצה או הנקודות לשינוי קנה מידה", + "Select the sketch curves or points to transform first": "יש לבחור תחילה את עקומות הסקיצה או הנקודות להתמרה", + "Spacing 2 must be a non-zero number": "מרווח 2 חייב להיות מספר שונה מאפס", + "Spacing must be a non-zero number": "המרווח חייב להיות מספר שונה מאפס", + "The design changed. Reopen Change Part Size for the component.": "התכן השתנה. יש לפתוח מחדש את שינוי גודל חלק עבור הרכיב.", + "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "הכיוון חייב להיות ציר או עקומת סקיצה ישרה הנמצאת במישור הסקיצה", + "The mirror line cannot also be mirrored": "אי אפשר לשקף גם את קו השיקוף עצמו", + "The mirror line must be a straight curve of this sketch, not an origin axis": "קו השיקוף חייב להיות עקומה ישרה של הסקיצה הזו, ולא אחד מצירי הראשית", + "Type a distance or an angle to move by": "יש להקליד מרחק או זווית להזזה", + "`joint` must be an id or a name": "`joint` חייב להיות מזהה או שם", + "`params` must be an object": "`params` חייב להיות אובייקט", + "`values` must be a list": "`values` חייב להיות רשימה", + "a chamfer needs a corner of exactly two lines": "פאזה דורשת פינה של שני קווים בדיוק", + "a file operation is in progress": "פעולת קובץ מתבצעת כעת", + "a picked curve is no longer in a sketch": "העקומה שנבחרה כבר אינה בסקיצה", + "a picked curve's sketch has not been solved": "הסקיצה של העקומה שנבחרה טרם נפתרה", + "a picked edge has no points": "למקצוע שנבחר אין נקודות", + "a picked edge is gone": "המקצוע שנבחר כבר לא קיים", + "a picked edge's body is gone": "הגוף של המקצוע שנבחר כבר לא קיים", + "choose a profile": "יש לבחור פרופיל", + "choose the cam's and the follower's joints": "יש לבחור את מפרק הפיקה ואת מפרק העוקב", + "choose the joints to couple": "יש לבחור את המפרקים לצימוד", + "each rail's curves must be in one sketch": "עקומות כל מסילה חייבות להיות בסקיצה אחת", + "feature computation ended without a result": "חישוב הפיצ'ר הסתיים ללא תוצאה", + "not a move": "זו אינה הזזה", + "not a number": "לא מספר", + "open a sketch first": "יש לפתוח סקיצה תחילה", + "pick a body or some of its faces": "יש לבחור גוף או כמה מפאותיו", + "pick a planar face": "יש לבחור פאה מישורית", + "pick a plane or a face as the tool": "יש לבחור מישור או פאה ככלי", + "pick a size": "יש לבחור גודל", + "pick edges of a body": "יש לבחור מקצועות של גוף", + "pick edges of one body": "יש לבחור מקצועות של גוף אחד", + "pick edges of the holes to remove": "יש לבחור מקצועות של החורים להסרה", + "pick faces of one body": "יש לבחור פאות של גוף אחד", + "pick faces to offset": "יש לבחור פאות להיסט", + "pick lines of one sketch": "יש לבחור קווים מסקיצה אחת", + "pick one plane or face as the tool, or sketch curves": "יש לבחור מישור אחד או פאה אחת ככלי, או עקומות סקיצה", + "pick sections in two or more sketches": "יש לבחור חתכים בשתי סקיצות או יותר", + "pick sketch curves or edges": "יש לבחור עקומות סקיצה או מקצועות", + "pick the face to untrim": "יש לבחור את הפאה לביטול גיזום", + "pick what to keep": "יש לבחור מה לשמור", + "pick what to keep of the other surface": "יש לבחור מה לשמור מהמשטח השני", + "select a direction (an axis, a sketch line or a straight edge) first": "יש לבחור תחילה כיוון (ציר, קו סקיצה או מקצוע ישר)", + "select a direction (an axis, a sketch line or a straight edge) for the profile to follow": "יש לבחור כיוון (ציר, קו סקיצה או מקצוע ישר) שהפרופיל ילך לאורכו", + "select a profile, edges or sketch lines first": "יש לבחור תחילה פרופיל, מקצועות או קווי סקיצה", + "select an axis": "יש לבחור ציר", + "select an axis, a straight or circular edge, or a cylinder, cone or torus face first": "יש לבחור תחילה ציר, מקצוע ישר או מעגלי, או פאה של גליל, חרוט או טורוס", + "select bodies first": "יש לבחור גופים תחילה", + "select corner points, or the two lines of one corner": "יש לבחור נקודות פינה, או את שני הקווים של פינה אחת", + "select one corner point, or the two lines of one corner": "יש לבחור נקודת פינה אחת, או את שני הקווים של פינה אחת", + "select sheet edges first": "יש לבחור תחילה מקצועות של הפח", + "select the bend line (a sketch line) first": "יש לבחור תחילה את קו הכיפוף (קו סקיצה)", + "select the cam's profile (a sketch profile or the cam's edges)": "יש לבחור את הפרופיל של הפיקה (פרופיל סקיצה או מקצועות הפיקה)", + "select the corner to cut first": "יש לבחור תחילה את הפינה לחיתוך", + "select the corners to round first": "יש לבחור תחילה את הפינות לעיגול", + "select the fixed face first (a plate's large face)": "יש לבחור תחילה את הפאה הקבועה (הפאה הגדולה של לוח)", + "select the frame sketch's lines first": "יש לבחור תחילה את קווי סקיצת המסגרת", + "select the path (sketch lines across the edge)": "יש לבחור את המסלול (קווי סקיצה על פני המקצוע)", + "select the rim face first": "יש לבחור תחילה את פאת השפה", + "select the sheet edge first": "יש לבחור תחילה את מקצוע הפח", + "select two components": "יש לבחור שני רכיבים", + "sketch is missing": "הסקיצה חסרה", + "the angle must be a number": "הזווית חייבת להיות מספר", + "the curves must be in one sketch": "העקומות חייבות להיות בסקיצה אחת", + "the direction must be an axis, a sketch line or a straight edge": "הכיוון חייב להיות ציר, קו סקיצה או מקצוע ישר", + "the duration must be a number of seconds, 0.001 or more": "משך הזמן חייב להיות מספר שניות, 0.001 או יותר", + "the line's sketch is gone": "הסקיצה של הקו כבר לא קיימת", + "the lines must be in one sketch": "הקווים חייבים להיות בסקיצה אחת", + "the lines must be in one sketch, not the section's": "הקווים חייבים להיות בסקיצה אחת, ולא בסקיצת החתך", + "the parts library is empty": "ספריית החלקים ריקה", + "the path curves must be in one other sketch": "עקומות המסלול חייבות להיות בסקיצה אחרת אחת", + "the path's sketch is gone": "הסקיצה של המסלול כבר לא קיימת", + "the position must be a number": "המיקום חייב להיות מספר", + "the preview failed": "התצוגה המקדימה נכשלה", + "the profiles and curves must be in one sketch": "הפרופילים והעקומות חייבים להיות בסקיצה אחת", + "the reference face must be on the edges' body": "פאת הייחוס חייבת להיות על הגוף של המקצועות", + "the scale must be above 0": "קנה המידה חייב להיות גדול מ־0", + "the section's profiles must be in one sketch": "הפרופילים של החתך חייבים להיות בסקיצה אחת", + "the two origins are on the same component": "שתי הראשיות נמצאות על אותו רכיב", + "trim by sketch curves, or by one plane or face": "יש לגזום באמצעות עקומות סקיצה, או באמצעות מישור אחד או פאה אחת", + "use a positive nominal diameter and a pitch smaller than it": "יש להשתמש בקוטר נומינלי חיובי ובפסיעה קטנה ממנו", + "values must be finite numbers": "הערכים חייבים להיות מספרים סופיים", + "values must be numbers or expressions": "הערכים חייבים להיות מספרים או ביטויים" + }, + "it": { + "Factor must be a positive number": "Il fattore deve essere un numero positivo", + "Library response is missing": "Manca la risposta della libreria", + "Part length must be greater than zero and at most 2000 mm": "La lunghezza del pezzo deve essere maggiore di zero e al massimo 2000 mm", + "Pick a part size": "Scegli una dimensione del pezzo", + "Quantity must be at least 2": "La quantità deve essere almeno 2", + "Select points of the sketch being edited": "Seleziona punti dello schizzo in modifica", + "Select the centre the pattern turns around first": "Seleziona prima il centro attorno a cui ruota la serie", + "Select the curves to offset first": "Seleziona prima le curve per l'offset", + "Select the mirror line": "Seleziona la linea di simmetria", + "Select the sketch curves or points to mirror first": "Seleziona prima le curve o i punti dello schizzo da specchiare", + "Select the sketch curves or points to move first": "Seleziona prima le curve o i punti dello schizzo da spostare", + "Select the sketch curves or points to pattern first": "Seleziona prima le curve o i punti dello schizzo per la serie", + "Select the sketch curves or points to scale first": "Seleziona prima le curve o i punti dello schizzo da scalare", + "Select the sketch curves or points to transform first": "Seleziona prima le curve o i punti dello schizzo da trasformare", + "Spacing 2 must be a non-zero number": "La spaziatura 2 deve essere un numero diverso da zero", + "Spacing must be a non-zero number": "La spaziatura deve essere un numero diverso da zero", + "The design changed. Reopen Change Part Size for the component.": "Il progetto è cambiato. Riapri Cambia dimensione del pezzo per il componente.", + "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "La direzione deve essere un asse o una curva retta dello schizzo che giace sul piano dello schizzo", + "The mirror line cannot also be mirrored": "La linea di simmetria non può essere specchiata a sua volta", + "The mirror line must be a straight curve of this sketch, not an origin axis": "La linea di simmetria deve essere una curva retta di questo schizzo, non un asse dell'origine", + "Type a distance or an angle to move by": "Scrivi una distanza o un angolo di spostamento", + "`joint` must be an id or a name": "`joint` deve essere un id o un nome", + "`params` must be an object": "`params` deve essere un oggetto", + "`values` must be a list": "`values` deve essere un elenco", + "a chamfer needs a corner of exactly two lines": "uno smusso richiede un angolo di esattamente due linee", + "a file operation is in progress": "è in corso un'operazione sul file", + "a picked curve is no longer in a sketch": "una curva scelta non è più in uno schizzo", + "a picked curve's sketch has not been solved": "lo schizzo di una curva scelta non è stato risolto", + "a picked edge has no points": "uno spigolo scelto non ha punti", + "a picked edge is gone": "uno spigolo scelto non esiste più", + "a picked edge's body is gone": "il corpo di uno spigolo scelto non esiste più", + "choose a profile": "scegli un profilo", + "choose the cam's and the follower's joints": "scegli i giunti della camma e del seguace", + "choose the joints to couple": "scegli i giunti da accoppiare", + "each rail's curves must be in one sketch": "le curve di ogni guida devono stare in un solo schizzo", + "feature computation ended without a result": "il calcolo dell'operazione si è concluso senza risultato", + "not a move": "non è uno spostamento", + "not a number": "non è un numero", + "open a sketch first": "apri prima uno schizzo", + "pick a body or some of its faces": "scegli un corpo o alcune delle sue facce", + "pick a planar face": "scegli una faccia piana", + "pick a plane or a face as the tool": "scegli un piano o una faccia come strumento", + "pick a size": "scegli una dimensione", + "pick edges of a body": "scegli spigoli di un corpo", + "pick edges of one body": "scegli spigoli di un solo corpo", + "pick edges of the holes to remove": "scegli gli spigoli dei fori da rimuovere", + "pick faces of one body": "scegli facce di un solo corpo", + "pick faces to offset": "scegli le facce di cui creare l'offset", + "pick lines of one sketch": "scegli linee di un solo schizzo", + "pick one plane or face as the tool, or sketch curves": "scegli un piano o una faccia come strumento, oppure curve dello schizzo", + "pick sections in two or more sketches": "scegli sezioni in due o più schizzi", + "pick sketch curves or edges": "scegli curve dello schizzo o spigoli", + "pick the face to untrim": "scegli la faccia di cui annullare il ritaglio", + "pick what to keep": "scegli cosa tenere", + "pick what to keep of the other surface": "scegli cosa tenere dell'altra superficie", + "select a direction (an axis, a sketch line or a straight edge) first": "seleziona prima una direzione (un asse, una linea dello schizzo o uno spigolo retto)", + "select a direction (an axis, a sketch line or a straight edge) for the profile to follow": "seleziona una direzione (un asse, una linea dello schizzo o uno spigolo retto) che il profilo deve seguire", + "select a profile, edges or sketch lines first": "seleziona prima un profilo, spigoli o linee dello schizzo", + "select an axis": "seleziona un asse", + "select an axis, a straight or circular edge, or a cylinder, cone or torus face first": "seleziona prima un asse, uno spigolo retto o circolare, oppure una faccia cilindrica, conica o toroidale", + "select bodies first": "seleziona prima dei corpi", + "select corner points, or the two lines of one corner": "seleziona punti d'angolo, oppure le due linee di un angolo", + "select one corner point, or the two lines of one corner": "seleziona un punto d'angolo, oppure le due linee di un angolo", + "select sheet edges first": "seleziona prima gli spigoli della lamiera", + "select the bend line (a sketch line) first": "seleziona prima la linea di piegatura (una linea dello schizzo)", + "select the cam's profile (a sketch profile or the cam's edges)": "seleziona il profilo della camma (un profilo dello schizzo o gli spigoli della camma)", + "select the corner to cut first": "seleziona prima l'angolo da tagliare", + "select the corners to round first": "seleziona prima gli angoli da arrotondare", + "select the fixed face first (a plate's large face)": "seleziona prima la faccia fissa (la faccia grande di una piastra)", + "select the frame sketch's lines first": "seleziona prima le linee dello schizzo del telaio", + "select the path (sketch lines across the edge)": "seleziona il percorso (linee dello schizzo lungo lo spigolo)", + "select the rim face first": "seleziona prima la faccia del bordo", + "select the sheet edge first": "seleziona prima lo spigolo della lamiera", + "select two components": "seleziona due componenti", + "sketch is missing": "manca lo schizzo", + "the angle must be a number": "l'angolo deve essere un numero", + "the curves must be in one sketch": "le curve devono stare in un solo schizzo", + "the direction must be an axis, a sketch line or a straight edge": "la direzione deve essere un asse, una linea dello schizzo o uno spigolo retto", + "the duration must be a number of seconds, 0.001 or more": "la durata deve essere un numero di secondi, 0.001 o più", + "the line's sketch is gone": "lo schizzo della linea non esiste più", + "the lines must be in one sketch": "le linee devono stare in un solo schizzo", + "the lines must be in one sketch, not the section's": "le linee devono stare in un solo schizzo, non in quello della sezione", + "the parts library is empty": "la libreria dei pezzi è vuota", + "the path curves must be in one other sketch": "le curve del percorso devono stare in un unico altro schizzo", + "the path's sketch is gone": "lo schizzo del percorso non esiste più", + "the position must be a number": "la posizione deve essere un numero", + "the preview failed": "l'anteprima non è riuscita", + "the profiles and curves must be in one sketch": "i profili e le curve devono stare in un solo schizzo", + "the reference face must be on the edges' body": "la faccia di riferimento deve appartenere al corpo degli spigoli", + "the scale must be above 0": "la scala deve essere maggiore di 0", + "the section's profiles must be in one sketch": "i profili della sezione devono stare in un solo schizzo", + "the two origins are on the same component": "le due origini sono sullo stesso componente", + "trim by sketch curves, or by one plane or face": "ritaglia con curve dello schizzo, oppure con un piano o una faccia", + "use a positive nominal diameter and a pitch smaller than it": "usa un diametro nominale positivo e un passo minore di esso", + "values must be finite numbers": "i valori devono essere numeri finiti", + "values must be numbers or expressions": "i valori devono essere numeri o espressioni" + }, + "ja": { + "Factor must be a positive number": "係数は正の数にしてください", + "Library response is missing": "ライブラリからの応答がありません", + "Part length must be greater than zero and at most 2000 mm": "パーツの長さは0より大きく、2000 mm以下にしてください", + "Pick a part size": "パーツのサイズを選択してください", + "Quantity must be at least 2": "数量は2以上にしてください", + "Select points of the sketch being edited": "編集中のスケッチの点を選択してください", + "Select the centre the pattern turns around first": "パターンの回転中心を先に選択してください", + "Select the curves to offset first": "オフセットする曲線を先に選択してください", + "Select the mirror line": "ミラー線を選択してください", + "Select the sketch curves or points to mirror first": "ミラーするスケッチの曲線または点を先に選択してください", + "Select the sketch curves or points to move first": "移動するスケッチの曲線または点を先に選択してください", + "Select the sketch curves or points to pattern first": "パターンにするスケッチの曲線または点を先に選択してください", + "Select the sketch curves or points to scale first": "尺度を変更するスケッチの曲線または点を先に選択してください", + "Select the sketch curves or points to transform first": "変換するスケッチの曲線または点を先に選択してください", + "Spacing 2 must be a non-zero number": "間隔 2は0以外の数値にしてください", + "Spacing must be a non-zero number": "間隔は0以外の数値にしてください", + "The design changed. Reopen Change Part Size for the component.": "デザインが変更されました。コンポーネントの「パーツ サイズを変更」を開き直してください。", + "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "方向は、軸、またはスケッチ平面上にある直線のスケッチ曲線にしてください", + "The mirror line cannot also be mirrored": "ミラー線自体をミラーすることはできません", + "The mirror line must be a straight curve of this sketch, not an origin axis": "ミラー線は、原点の軸ではなく、このスケッチの直線にしてください", + "Type a distance or an angle to move by": "移動する距離または角度を入力してください", + "`joint` must be an id or a name": "`joint` にはIDまたは名前を指定してください", + "`params` must be an object": "`params` はオブジェクトにしてください", + "`values` must be a list": "`values` はリストにしてください", + "a chamfer needs a corner of exactly two lines": "面取りには、ちょうど2本の線からなるコーナーが必要です", + "a file operation is in progress": "ファイル操作の実行中です", + "a picked curve is no longer in a sketch": "選択した曲線がスケッチ内にありません", + "a picked curve's sketch has not been solved": "選択した曲線のスケッチがまだ解かれていません", + "a picked edge has no points": "選択したエッジに点がありません", + "a picked edge is gone": "選択したエッジが存在しなくなりました", + "a picked edge's body is gone": "選択したエッジのボディが存在しなくなりました", + "choose a profile": "プロファイルを選択してください", + "choose the cam's and the follower's joints": "カムと従動節のジョイントを選択してください", + "choose the joints to couple": "連結するジョイントを選択してください", + "each rail's curves must be in one sketch": "各レールの曲線は1つのスケッチ内にある必要があります", + "feature computation ended without a result": "フィーチャーの計算が結果なしで終了しました", + "not a move": "移動ではありません", + "not a number": "数値ではありません", + "open a sketch first": "先にスケッチを開いてください", + "pick a body or some of its faces": "ボディ、またはそのボディの面を選択してください", + "pick a planar face": "平面状の面を選択してください", + "pick a plane or a face as the tool": "ツールとして平面または面を選択してください", + "pick a size": "サイズを選択してください", + "pick edges of a body": "ボディのエッジを選択してください", + "pick edges of one body": "1つのボディのエッジを選択してください", + "pick edges of the holes to remove": "削除する穴のエッジを選択してください", + "pick faces of one body": "1つのボディの面を選択してください", + "pick faces to offset": "オフセットする面を選択してください", + "pick lines of one sketch": "1つのスケッチの線を選択してください", + "pick one plane or face as the tool, or sketch curves": "ツールとして平面または面を1つ、またはスケッチ曲線を選択してください", + "pick sections in two or more sketches": "2つ以上のスケッチにあるセクションを選択してください", + "pick sketch curves or edges": "スケッチ曲線またはエッジを選択してください", + "pick the face to untrim": "トリム解除する面を選択してください", + "pick what to keep": "残す部分を選択してください", + "pick what to keep of the other surface": "相手のサーフェスで残す部分を選択してください", + "select a direction (an axis, a sketch line or a straight edge) first": "方向(軸、スケッチ線、または直線のエッジ)を先に選択してください", + "select a direction (an axis, a sketch line or a straight edge) for the profile to follow": "プロファイルが沿う方向(軸、スケッチ線、または直線のエッジ)を選択してください", + "select a profile, edges or sketch lines first": "プロファイル、エッジ、またはスケッチ線を先に選択してください", + "select an axis": "軸を選択してください", + "select an axis, a straight or circular edge, or a cylinder, cone or torus face first": "軸、直線または円のエッジ、あるいは円柱・円錐・トーラスの面を先に選択してください", + "select bodies first": "ボディを先に選択してください", + "select corner points, or the two lines of one corner": "コーナーの点、または1つのコーナーの2本の線を選択してください", + "select one corner point, or the two lines of one corner": "コーナーの点を1つ、または1つのコーナーの2本の線を選択してください", + "select sheet edges first": "板金のエッジを先に選択してください", + "select the bend line (a sketch line) first": "曲げ線(スケッチ線)を先に選択してください", + "select the cam's profile (a sketch profile or the cam's edges)": "カムのプロファイル(スケッチのプロファイル、またはカムのエッジ)を選択してください", + "select the corner to cut first": "切り落とすコーナーを先に選択してください", + "select the corners to round first": "丸めるコーナーを先に選択してください", + "select the fixed face first (a plate's large face)": "固定面(プレートの大きな面)を先に選択してください", + "select the frame sketch's lines first": "フレームスケッチの線を先に選択してください", + "select the path (sketch lines across the edge)": "パス(エッジをまたぐスケッチ線)を選択してください", + "select the rim face first": "リム面を先に選択してください", + "select the sheet edge first": "板金のエッジを先に選択してください", + "select two components": "2つのコンポーネントを選択してください", + "sketch is missing": "スケッチが見つかりません", + "the angle must be a number": "角度は数値にしてください", + "the curves must be in one sketch": "曲線は1つのスケッチ内にある必要があります", + "the direction must be an axis, a sketch line or a straight edge": "方向は、軸、スケッチ線、または直線のエッジにしてください", + "the duration must be a number of seconds, 0.001 or more": "時間は0.001秒以上の秒数で指定してください", + "the line's sketch is gone": "線のスケッチが存在しなくなりました", + "the lines must be in one sketch": "線は1つのスケッチ内にある必要があります", + "the lines must be in one sketch, not the section's": "線は、セクションのスケッチではなく、1つのスケッチ内にある必要があります", + "the parts library is empty": "パーツライブラリが空です", + "the path curves must be in one other sketch": "パスの曲線は、別の1つのスケッチ内にある必要があります", + "the path's sketch is gone": "パスのスケッチが存在しなくなりました", + "the position must be a number": "位置は数値にしてください", + "the preview failed": "プレビューに失敗しました", + "the profiles and curves must be in one sketch": "プロファイルと曲線は1つのスケッチ内にある必要があります", + "the reference face must be on the edges' body": "参照面はエッジのボディ上にある必要があります", + "the scale must be above 0": "尺度は0より大きくしてください", + "the section's profiles must be in one sketch": "セクションのプロファイルは1つのスケッチ内にある必要があります", + "the two origins are on the same component": "2つの原点が同じコンポーネント上にあります", + "trim by sketch curves, or by one plane or face": "スケッチ曲線、または1つの平面か面でトリムしてください", + "use a positive nominal diameter and a pitch smaller than it": "正の呼び径と、それより小さいピッチを使用してください", + "values must be finite numbers": "値は有限の数値にしてください", + "values must be numbers or expressions": "値は数値または式にしてください" + }, + "ko": { + "Factor must be a positive number": "계수는 양수여야 합니다", + "Library response is missing": "라이브러리 응답이 없습니다", + "Part length must be greater than zero and at most 2000 mm": "부품 길이는 0보다 크고 2000 mm 이하여야 합니다", + "Pick a part size": "부품 크기를 선택하세요", + "Quantity must be at least 2": "수량은 2 이상이어야 합니다", + "Select points of the sketch being edited": "편집 중인 스케치의 점을 선택하세요", + "Select the centre the pattern turns around first": "패턴이 회전할 중심을 먼저 선택하세요", + "Select the curves to offset first": "오프셋할 곡선을 먼저 선택하세요", + "Select the mirror line": "대칭선을 선택하세요", + "Select the sketch curves or points to mirror first": "대칭 복사할 스케치 곡선 또는 점을 먼저 선택하세요", + "Select the sketch curves or points to move first": "이동할 스케치 곡선 또는 점을 먼저 선택하세요", + "Select the sketch curves or points to pattern first": "패턴으로 만들 스케치 곡선 또는 점을 먼저 선택하세요", + "Select the sketch curves or points to scale first": "축척을 바꿀 스케치 곡선 또는 점을 먼저 선택하세요", + "Select the sketch curves or points to transform first": "변환할 스케치 곡선 또는 점을 먼저 선택하세요", + "Spacing 2 must be a non-zero number": "간격 2는 0이 아닌 숫자여야 합니다", + "Spacing must be a non-zero number": "간격은 0이 아닌 숫자여야 합니다", + "The design changed. Reopen Change Part Size for the component.": "설계가 변경되었습니다. 구성요소의 '부품 크기 변경'을 다시 여세요.", + "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "방향은 축이거나 스케치 평면 위에 있는 직선 스케치 곡선이어야 합니다", + "The mirror line cannot also be mirrored": "대칭선 자체를 대칭 복사할 수 없습니다", + "The mirror line must be a straight curve of this sketch, not an origin axis": "대칭선은 원점 축이 아니라 이 스케치의 직선이어야 합니다", + "Type a distance or an angle to move by": "이동할 거리 또는 각도를 입력하세요", + "`joint` must be an id or a name": "`joint`는 ID 또는 이름이어야 합니다", + "`params` must be an object": "`params`는 객체여야 합니다", + "`values` must be a list": "`values`는 목록이어야 합니다", + "a chamfer needs a corner of exactly two lines": "모따기에는 정확히 두 선으로 이루어진 코너가 필요합니다", + "a file operation is in progress": "파일 작업이 진행 중입니다", + "a picked curve is no longer in a sketch": "선택한 곡선이 더 이상 스케치에 없습니다", + "a picked curve's sketch has not been solved": "선택한 곡선의 스케치가 아직 풀리지 않았습니다", + "a picked edge has no points": "선택한 모서리에 점이 없습니다", + "a picked edge is gone": "선택한 모서리가 더 이상 없습니다", + "a picked edge's body is gone": "선택한 모서리의 바디가 더 이상 없습니다", + "choose a profile": "프로파일을 선택하세요", + "choose the cam's and the follower's joints": "캠과 종동절의 관절을 선택하세요", + "choose the joints to couple": "연결할 관절을 선택하세요", + "each rail's curves must be in one sketch": "각 레일의 곡선은 하나의 스케치 안에 있어야 합니다", + "feature computation ended without a result": "특성 계산이 결과 없이 끝났습니다", + "not a move": "이동이 아닙니다", + "not a number": "숫자가 아닙니다", + "open a sketch first": "먼저 스케치를 여세요", + "pick a body or some of its faces": "바디 또는 바디의 면을 선택하세요", + "pick a planar face": "평평한 면을 선택하세요", + "pick a plane or a face as the tool": "도구로 사용할 평면 또는 면을 선택하세요", + "pick a size": "크기를 선택하세요", + "pick edges of a body": "바디의 모서리를 선택하세요", + "pick edges of one body": "하나의 바디의 모서리를 선택하세요", + "pick edges of the holes to remove": "제거할 구멍의 모서리를 선택하세요", + "pick faces of one body": "하나의 바디의 면을 선택하세요", + "pick faces to offset": "오프셋할 면을 선택하세요", + "pick lines of one sketch": "하나의 스케치의 선을 선택하세요", + "pick one plane or face as the tool, or sketch curves": "도구로 사용할 평면 또는 면 하나, 또는 스케치 곡선을 선택하세요", + "pick sections in two or more sketches": "둘 이상의 스케치에 있는 단면을 선택하세요", + "pick sketch curves or edges": "스케치 곡선 또는 모서리를 선택하세요", + "pick the face to untrim": "트림을 해제할 면을 선택하세요", + "pick what to keep": "남길 부분을 선택하세요", + "pick what to keep of the other surface": "다른 곡면에서 남길 부분을 선택하세요", + "select a direction (an axis, a sketch line or a straight edge) first": "방향(축, 스케치 선 또는 직선 모서리)을 먼저 선택하세요", + "select a direction (an axis, a sketch line or a straight edge) for the profile to follow": "프로파일이 따라갈 방향(축, 스케치 선 또는 직선 모서리)을 선택하세요", + "select a profile, edges or sketch lines first": "프로파일, 모서리 또는 스케치 선을 먼저 선택하세요", + "select an axis": "축을 선택하세요", + "select an axis, a straight or circular edge, or a cylinder, cone or torus face first": "축, 직선 또는 원형 모서리, 또는 원기둥·원뿔·토러스 면을 먼저 선택하세요", + "select bodies first": "바디를 먼저 선택하세요", + "select corner points, or the two lines of one corner": "코너 점, 또는 하나의 코너를 이루는 두 선을 선택하세요", + "select one corner point, or the two lines of one corner": "코너 점 하나, 또는 하나의 코너를 이루는 두 선을 선택하세요", + "select sheet edges first": "판금 모서리를 먼저 선택하세요", + "select the bend line (a sketch line) first": "벤딩 선(스케치 선)을 먼저 선택하세요", + "select the cam's profile (a sketch profile or the cam's edges)": "캠의 프로파일(스케치 프로파일 또는 캠의 모서리)을 선택하세요", + "select the corner to cut first": "잘라낼 코너를 먼저 선택하세요", + "select the corners to round first": "둥글게 만들 코너를 먼저 선택하세요", + "select the fixed face first (a plate's large face)": "고정 면(플레이트의 큰 면)을 먼저 선택하세요", + "select the frame sketch's lines first": "프레임 스케치의 선을 먼저 선택하세요", + "select the path (sketch lines across the edge)": "경로(모서리를 가로지르는 스케치 선)를 선택하세요", + "select the rim face first": "테두리 면을 먼저 선택하세요", + "select the sheet edge first": "판금 모서리를 먼저 선택하세요", + "select two components": "구성요소 두 개를 선택하세요", + "sketch is missing": "스케치가 없습니다", + "the angle must be a number": "각도는 숫자여야 합니다", + "the curves must be in one sketch": "곡선은 하나의 스케치 안에 있어야 합니다", + "the direction must be an axis, a sketch line or a straight edge": "방향은 축, 스케치 선 또는 직선 모서리여야 합니다", + "the duration must be a number of seconds, 0.001 or more": "지속 시간은 0.001초 이상의 초 단위 숫자여야 합니다", + "the line's sketch is gone": "선이 속한 스케치가 더 이상 없습니다", + "the lines must be in one sketch": "선은 하나의 스케치 안에 있어야 합니다", + "the lines must be in one sketch, not the section's": "선은 단면의 스케치가 아닌 하나의 스케치 안에 있어야 합니다", + "the parts library is empty": "부품 라이브러리가 비어 있습니다", + "the path curves must be in one other sketch": "경로 곡선은 다른 하나의 스케치 안에 있어야 합니다", + "the path's sketch is gone": "경로의 스케치가 더 이상 없습니다", + "the position must be a number": "위치는 숫자여야 합니다", + "the preview failed": "미리보기에 실패했습니다", + "the profiles and curves must be in one sketch": "프로파일과 곡선은 하나의 스케치 안에 있어야 합니다", + "the reference face must be on the edges' body": "참조 면은 모서리가 속한 바디에 있어야 합니다", + "the scale must be above 0": "축척은 0보다 커야 합니다", + "the section's profiles must be in one sketch": "단면의 프로파일은 하나의 스케치 안에 있어야 합니다", + "the two origins are on the same component": "두 원점이 같은 구성요소에 있습니다", + "trim by sketch curves, or by one plane or face": "스케치 곡선 또는 평면이나 면 하나로 트림하세요", + "use a positive nominal diameter and a pitch smaller than it": "양수인 호칭 지름과 그보다 작은 피치를 사용하세요", + "values must be finite numbers": "값은 유한한 숫자여야 합니다", + "values must be numbers or expressions": "값은 숫자 또는 식이어야 합니다" + }, + "vi": { + "Factor must be a positive number": "Hệ số phải là một số dương", + "Library response is missing": "Thiếu phản hồi từ thư viện", + "Part length must be greater than zero and at most 2000 mm": "Chiều dài chi tiết phải lớn hơn 0 và tối đa 2000 mm", + "Pick a part size": "Chọn một kích thước chi tiết", + "Quantity must be at least 2": "Số lượng phải từ 2 trở lên", + "Select points of the sketch being edited": "Chọn các điểm của phác thảo đang chỉnh sửa", + "Select the centre the pattern turns around first": "Hãy chọn tâm mà mảng xoay quanh trước", + "Select the curves to offset first": "Hãy chọn các đường cong cần offset trước", + "Select the mirror line": "Chọn đường đối xứng", + "Select the sketch curves or points to mirror first": "Hãy chọn các đường cong hoặc điểm phác thảo cần đối xứng trước", + "Select the sketch curves or points to move first": "Hãy chọn các đường cong hoặc điểm phác thảo cần di chuyển trước", + "Select the sketch curves or points to pattern first": "Hãy chọn các đường cong hoặc điểm phác thảo cần tạo mảng trước", + "Select the sketch curves or points to scale first": "Hãy chọn các đường cong hoặc điểm phác thảo cần thay đổi tỷ lệ trước", + "Select the sketch curves or points to transform first": "Hãy chọn các đường cong hoặc điểm phác thảo cần biến đổi trước", + "Spacing 2 must be a non-zero number": "Khoảng cách 2 phải là một số khác 0", + "Spacing must be a non-zero number": "Khoảng cách phải là một số khác 0", + "The design changed. Reopen Change Part Size for the component.": "Thiết kế đã thay đổi. Hãy mở lại Change Part Size cho thành phần này.", + "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "Hướng phải là một trục hoặc một đường cong phác thảo thẳng nằm trong mặt phẳng phác thảo", + "The mirror line cannot also be mirrored": "Đường đối xứng không thể đồng thời được lấy đối xứng", + "The mirror line must be a straight curve of this sketch, not an origin axis": "Đường đối xứng phải là một đường cong thẳng của phác thảo này, không phải trục gốc", + "Type a distance or an angle to move by": "Nhập khoảng cách hoặc góc để di chuyển", + "`joint` must be an id or a name": "`joint` phải là một id hoặc một tên", + "`params` must be an object": "`params` phải là một đối tượng", + "`values` must be a list": "`values` phải là một danh sách", + "a chamfer needs a corner of exactly two lines": "vát cạnh cần một góc gồm đúng hai đường thẳng", + "a file operation is in progress": "một thao tác tệp đang được thực hiện", + "a picked curve is no longer in a sketch": "một đường cong đã chọn không còn nằm trong phác thảo nào", + "a picked curve's sketch has not been solved": "phác thảo của một đường cong đã chọn chưa được giải", + "a picked edge has no points": "một cạnh đã chọn không có điểm nào", + "a picked edge is gone": "một cạnh đã chọn không còn nữa", + "a picked edge's body is gone": "thân của một cạnh đã chọn không còn nữa", + "choose a profile": "chọn một biên dạng", + "choose the cam's and the follower's joints": "chọn khớp của cam và khớp của cần đẩy", + "choose the joints to couple": "chọn các khớp cần ghép nối", + "each rail's curves must be in one sketch": "các đường cong của mỗi đường dẫn hướng phải nằm trong cùng một phác thảo", + "feature computation ended without a result": "việc tính toán đặc trưng kết thúc mà không có kết quả", + "not a move": "không phải một phép di chuyển", + "not a number": "không phải là số", + "open a sketch first": "hãy mở một phác thảo trước", + "pick a body or some of its faces": "chọn một thân hoặc một số mặt của thân", + "pick a planar face": "chọn một mặt phẳng", + "pick a plane or a face as the tool": "chọn một mặt phẳng hoặc một mặt làm dụng cụ", + "pick a size": "chọn một kích thước", + "pick edges of a body": "chọn các cạnh của một thân", + "pick edges of one body": "chọn các cạnh của cùng một thân", + "pick edges of the holes to remove": "chọn các cạnh của những lỗ cần loại bỏ", + "pick faces of one body": "chọn các mặt của cùng một thân", + "pick faces to offset": "chọn các mặt cần offset", + "pick lines of one sketch": "chọn các đường thẳng của cùng một phác thảo", + "pick one plane or face as the tool, or sketch curves": "chọn một mặt phẳng hoặc một mặt làm dụng cụ, hoặc chọn các đường cong phác thảo", + "pick sections in two or more sketches": "chọn các mặt cắt trong hai phác thảo trở lên", + "pick sketch curves or edges": "chọn các đường cong phác thảo hoặc các cạnh", + "pick the face to untrim": "chọn mặt cần hủy cắt tỉa", + "pick what to keep": "chọn phần cần giữ lại", + "pick what to keep of the other surface": "chọn phần cần giữ lại của bề mặt còn lại", + "select a direction (an axis, a sketch line or a straight edge) first": "hãy chọn một hướng (một trục, một đường thẳng phác thảo hoặc một cạnh thẳng) trước", + "select a direction (an axis, a sketch line or a straight edge) for the profile to follow": "chọn một hướng (một trục, một đường thẳng phác thảo hoặc một cạnh thẳng) để biên dạng đi theo", + "select a profile, edges or sketch lines first": "hãy chọn một biên dạng, các cạnh hoặc các đường thẳng phác thảo trước", + "select an axis": "chọn một trục", + "select an axis, a straight or circular edge, or a cylinder, cone or torus face first": "hãy chọn một trục, một cạnh thẳng hoặc cạnh tròn, hoặc một mặt trụ, mặt nón hay mặt xuyến trước", + "select bodies first": "hãy chọn các thân trước", + "select corner points, or the two lines of one corner": "chọn các điểm góc, hoặc hai đường thẳng của một góc", + "select one corner point, or the two lines of one corner": "chọn một điểm góc, hoặc hai đường thẳng của một góc", + "select sheet edges first": "hãy chọn các cạnh của tấm trước", + "select the bend line (a sketch line) first": "hãy chọn đường gập (một đường thẳng phác thảo) trước", + "select the cam's profile (a sketch profile or the cam's edges)": "chọn biên dạng của cam (một biên dạng phác thảo hoặc các cạnh của cam)", + "select the corner to cut first": "hãy chọn góc cần cắt trước", + "select the corners to round first": "hãy chọn các góc cần bo tròn trước", + "select the fixed face first (a plate's large face)": "hãy chọn mặt cố định trước (mặt lớn của một tấm)", + "select the frame sketch's lines first": "hãy chọn các đường thẳng của phác thảo khung trước", + "select the path (sketch lines across the edge)": "chọn đường dẫn (các đường thẳng phác thảo dọc qua cạnh)", + "select the rim face first": "hãy chọn mặt viền trước", + "select the sheet edge first": "hãy chọn cạnh của tấm trước", + "select two components": "chọn hai thành phần", + "sketch is missing": "thiếu phác thảo", + "the angle must be a number": "góc phải là một số", + "the curves must be in one sketch": "các đường cong phải nằm trong cùng một phác thảo", + "the direction must be an axis, a sketch line or a straight edge": "hướng phải là một trục, một đường thẳng phác thảo hoặc một cạnh thẳng", + "the duration must be a number of seconds, 0.001 or more": "thời lượng phải là một số giây, từ 0,001 trở lên", + "the line's sketch is gone": "phác thảo của đường thẳng không còn nữa", + "the lines must be in one sketch": "các đường thẳng phải nằm trong cùng một phác thảo", + "the lines must be in one sketch, not the section's": "các đường thẳng phải nằm trong cùng một phác thảo, không phải phác thảo của mặt cắt", + "the parts library is empty": "thư viện chi tiết đang trống", + "the path curves must be in one other sketch": "các đường cong của đường dẫn phải nằm trong cùng một phác thảo khác", + "the path's sketch is gone": "phác thảo của đường dẫn không còn nữa", + "the position must be a number": "vị trí phải là một số", + "the preview failed": "xem trước không thành công", + "the profiles and curves must be in one sketch": "các biên dạng và đường cong phải nằm trong cùng một phác thảo", + "the reference face must be on the edges' body": "mặt tham chiếu phải thuộc thân của các cạnh", + "the scale must be above 0": "tỷ lệ phải lớn hơn 0", + "the section's profiles must be in one sketch": "các biên dạng của mặt cắt phải nằm trong cùng một phác thảo", + "the two origins are on the same component": "hai gốc tọa độ nằm trên cùng một thành phần", + "trim by sketch curves, or by one plane or face": "cắt tỉa bằng các đường cong phác thảo, hoặc bằng một mặt phẳng hay một mặt", + "use a positive nominal diameter and a pitch smaller than it": "dùng đường kính danh nghĩa dương và bước ren nhỏ hơn đường kính đó", + "values must be finite numbers": "các giá trị phải là số hữu hạn", + "values must be numbers or expressions": "các giá trị phải là số hoặc biểu thức" + }, + "zh": { + "Factor must be a positive number": "系数必须是正数", + "Library response is missing": "缺少零件库的响应", + "Part length must be greater than zero and at most 2000 mm": "零件长度必须大于零且不超过 2000 mm", + "Pick a part size": "请选择零件尺寸", + "Quantity must be at least 2": "数量至少为 2", + "Select points of the sketch being edited": "请选择正在编辑的草图中的点", + "Select the centre the pattern turns around first": "请先选择阵列旋转所绕的中心", + "Select the curves to offset first": "请先选择要偏移的曲线", + "Select the mirror line": "请选择镜像线", + "Select the sketch curves or points to mirror first": "请先选择要镜像的草图曲线或点", + "Select the sketch curves or points to move first": "请先选择要移动的草图曲线或点", + "Select the sketch curves or points to pattern first": "请先选择要阵列的草图曲线或点", + "Select the sketch curves or points to scale first": "请先选择要缩放的草图曲线或点", + "Select the sketch curves or points to transform first": "请先选择要变换的草图曲线或点", + "Spacing 2 must be a non-zero number": "间距 2 必须是非零数字", + "Spacing must be a non-zero number": "间距必须是非零数字", + "The design changed. Reopen Change Part Size for the component.": "设计已更改。请为该组件重新打开“更改零件尺寸”。", + "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "方向必须是轴,或位于草图平面内的直线草图曲线", + "The mirror line cannot also be mirrored": "镜像线本身不能再被镜像", + "The mirror line must be a straight curve of this sketch, not an origin axis": "镜像线必须是此草图中的直线曲线,不能是原点轴", + "Type a distance or an angle to move by": "请输入要移动的距离或角度", + "`joint` must be an id or a name": "“joint”必须是编号或名称", + "`params` must be an object": "“params”必须是对象", + "`values` must be a list": "“values”必须是列表", + "a chamfer needs a corner of exactly two lines": "倒角需要恰好由两条直线构成的角", + "a file operation is in progress": "正在进行文件操作", + "a picked curve is no longer in a sketch": "所选曲线已不在任何草图中", + "a picked curve's sketch has not been solved": "所选曲线所在的草图尚未求解", + "a picked edge has no points": "所选边没有点", + "a picked edge is gone": "所选边已不存在", + "a picked edge's body is gone": "所选边所属的实体已不存在", + "choose a profile": "请选择轮廓", + "choose the cam's and the follower's joints": "请选择凸轮和从动件的接头", + "choose the joints to couple": "请选择要耦合的接头", + "each rail's curves must be in one sketch": "每条导轨的曲线必须位于同一个草图中", + "feature computation ended without a result": "特征计算结束时没有返回结果", + "not a move": "不是移动", + "not a number": "不是数字", + "open a sketch first": "请先打开一个草图", + "pick a body or some of its faces": "请选择一个实体或它的若干个面", + "pick a planar face": "请选择一个平面", + "pick a plane or a face as the tool": "请选择一个平面或一个面作为工具", + "pick a size": "请选择尺寸", + "pick edges of a body": "请选择实体的边", + "pick edges of one body": "请选择同一个实体的边", + "pick edges of the holes to remove": "请选择要移除的孔的边", + "pick faces of one body": "请选择同一个实体的面", + "pick faces to offset": "请选择要偏移的面", + "pick lines of one sketch": "请选择同一个草图的直线", + "pick one plane or face as the tool, or sketch curves": "请选择一个平面或一个面作为工具,或选择草图曲线", + "pick sections in two or more sketches": "请选择位于两个或更多草图中的截面", + "pick sketch curves or edges": "请选择草图曲线或边", + "pick the face to untrim": "请选择要取消修剪的面", + "pick what to keep": "请选择要保留的部分", + "pick what to keep of the other surface": "请选择另一个曲面上要保留的部分", + "select a direction (an axis, a sketch line or a straight edge) first": "请先选择方向(轴、草图直线或直边)", + "select a direction (an axis, a sketch line or a straight edge) for the profile to follow": "请选择轮廓所沿的方向(轴、草图直线或直边)", + "select a profile, edges or sketch lines first": "请先选择轮廓、边或草图直线", + "select an axis": "请选择一个轴", + "select an axis, a straight or circular edge, or a cylinder, cone or torus face first": "请先选择轴、直边或圆边,或圆柱面、圆锥面或圆环面", + "select bodies first": "请先选择实体", + "select corner points, or the two lines of one corner": "请选择角点,或同一个角的两条直线", + "select one corner point, or the two lines of one corner": "请选择一个角点,或同一个角的两条直线", + "select sheet edges first": "请先选择钣金边", + "select the bend line (a sketch line) first": "请先选择折弯线(草图直线)", + "select the cam's profile (a sketch profile or the cam's edges)": "请选择凸轮的轮廓(草图轮廓或凸轮的边)", + "select the corner to cut first": "请先选择要切除的角", + "select the corners to round first": "请先选择要倒圆的角", + "select the fixed face first (a plate's large face)": "请先选择固定面(板的大面)", + "select the frame sketch's lines first": "请先选择框架草图的直线", + "select the path (sketch lines across the edge)": "请选择路径(横跨边的草图直线)", + "select the rim face first": "请先选择边缘面", + "select the sheet edge first": "请先选择钣金边", + "select two components": "请选择两个组件", + "sketch is missing": "草图不存在", + "the angle must be a number": "角度必须是数字", + "the curves must be in one sketch": "曲线必须位于同一个草图中", + "the direction must be an axis, a sketch line or a straight edge": "方向必须是轴、草图直线或直边", + "the duration must be a number of seconds, 0.001 or more": "时长必须是不小于 0.001 的秒数", + "the line's sketch is gone": "该直线所在的草图已不存在", + "the lines must be in one sketch": "直线必须位于同一个草图中", + "the lines must be in one sketch, not the section's": "直线必须位于同一个草图中,且不能是截面所在的草图", + "the parts library is empty": "零件库是空的", + "the path curves must be in one other sketch": "路径曲线必须位于同一个另外的草图中", + "the path's sketch is gone": "路径所在的草图已不存在", + "the position must be a number": "位置必须是数字", + "the preview failed": "预览失败", + "the profiles and curves must be in one sketch": "轮廓和曲线必须位于同一个草图中", + "the reference face must be on the edges' body": "参考面必须位于这些边所属的实体上", + "the scale must be above 0": "缩放比例必须大于 0", + "the section's profiles must be in one sketch": "截面的轮廓必须位于同一个草图中", + "the two origins are on the same component": "这两个原点位于同一个组件上", + "trim by sketch curves, or by one plane or face": "请用草图曲线修剪,或用一个平面或面修剪", + "use a positive nominal diameter and a pitch smaller than it": "请使用正的公称直径,且螺距小于公称直径", + "values must be finite numbers": "值必须是有限数字", + "values must be numbers or expressions": "值必须是数字或表达式" + }, + "zh-TW": { + "Factor must be a positive number": "係數必須是正數", + "Library response is missing": "缺少零件庫的回應", + "Part length must be greater than zero and at most 2000 mm": "零件長度必須大於零且不超過 2000 mm", + "Pick a part size": "請選取零件尺寸", + "Quantity must be at least 2": "數量至少為 2", + "Select points of the sketch being edited": "請選取正在編輯的草圖中的點", + "Select the centre the pattern turns around first": "請先選取陣列旋轉所繞的中心", + "Select the curves to offset first": "請先選取要偏移的曲線", + "Select the mirror line": "請選取鏡射線", + "Select the sketch curves or points to mirror first": "請先選取要鏡射的草圖曲線或點", + "Select the sketch curves or points to move first": "請先選取要移動的草圖曲線或點", + "Select the sketch curves or points to pattern first": "請先選取要陣列的草圖曲線或點", + "Select the sketch curves or points to scale first": "請先選取要縮放的草圖曲線或點", + "Select the sketch curves or points to transform first": "請先選取要變換的草圖曲線或點", + "Spacing 2 must be a non-zero number": "間距 2 必須是非零數字", + "Spacing must be a non-zero number": "間距必須是非零數字", + "The design changed. Reopen Change Part Size for the component.": "設計已變更。請為該元件重新開啟「變更零件尺寸」。", + "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "方向必須是軸,或位於草圖平面內的直線草圖曲線", + "The mirror line cannot also be mirrored": "鏡射線本身不能再被鏡射", + "The mirror line must be a straight curve of this sketch, not an origin axis": "鏡射線必須是此草圖中的直線曲線,不能是原點軸", + "Type a distance or an angle to move by": "請輸入要移動的距離或角度", + "`joint` must be an id or a name": "「joint」必須是編號或名稱", + "`params` must be an object": "「params」必須是物件", + "`values` must be a list": "「values」必須是清單", + "a chamfer needs a corner of exactly two lines": "倒角需要恰好由兩條直線構成的角", + "a file operation is in progress": "正在進行檔案操作", + "a picked curve is no longer in a sketch": "所選曲線已不在任何草圖中", + "a picked curve's sketch has not been solved": "所選曲線所在的草圖尚未求解", + "a picked edge has no points": "所選邊沒有點", + "a picked edge is gone": "所選邊已不存在", + "a picked edge's body is gone": "所選邊所屬的實體已不存在", + "choose a profile": "請選取輪廓", + "choose the cam's and the follower's joints": "請選取凸輪和從動件的接頭", + "choose the joints to couple": "請選取要耦合的接頭", + "each rail's curves must be in one sketch": "每條導軌的曲線必須位於同一個草圖中", + "feature computation ended without a result": "特徵計算結束時沒有傳回結果", + "not a move": "不是移動", + "not a number": "不是數字", + "open a sketch first": "請先開啟一個草圖", + "pick a body or some of its faces": "請選取一個實體或它的若干個面", + "pick a planar face": "請選取一個平面", + "pick a plane or a face as the tool": "請選取一個平面或一個面作為工具", + "pick a size": "請選取尺寸", + "pick edges of a body": "請選取實體的邊", + "pick edges of one body": "請選取同一個實體的邊", + "pick edges of the holes to remove": "請選取要移除的孔的邊", + "pick faces of one body": "請選取同一個實體的面", + "pick faces to offset": "請選取要偏移的面", + "pick lines of one sketch": "請選取同一個草圖的直線", + "pick one plane or face as the tool, or sketch curves": "請選取一個平面或一個面作為工具,或選取草圖曲線", + "pick sections in two or more sketches": "請選取位於兩個或更多草圖中的截面", + "pick sketch curves or edges": "請選取草圖曲線或邊", + "pick the face to untrim": "請選取要取消修剪的面", + "pick what to keep": "請選取要保留的部分", + "pick what to keep of the other surface": "請選取另一個曲面上要保留的部分", + "select a direction (an axis, a sketch line or a straight edge) first": "請先選取方向(軸、草圖直線或直邊)", + "select a direction (an axis, a sketch line or a straight edge) for the profile to follow": "請選取輪廓所沿的方向(軸、草圖直線或直邊)", + "select a profile, edges or sketch lines first": "請先選取輪廓、邊或草圖直線", + "select an axis": "請選取一個軸", + "select an axis, a straight or circular edge, or a cylinder, cone or torus face first": "請先選取軸、直邊或圓邊,或圓柱面、圓錐面或圓環面", + "select bodies first": "請先選取實體", + "select corner points, or the two lines of one corner": "請選取角點,或同一個角的兩條直線", + "select one corner point, or the two lines of one corner": "請選取一個角點,或同一個角的兩條直線", + "select sheet edges first": "請先選取鈑金邊", + "select the bend line (a sketch line) first": "請先選取折彎線(草圖直線)", + "select the cam's profile (a sketch profile or the cam's edges)": "請選取凸輪的輪廓(草圖輪廓或凸輪的邊)", + "select the corner to cut first": "請先選取要切除的角", + "select the corners to round first": "請先選取要倒圓的角", + "select the fixed face first (a plate's large face)": "請先選取固定面(板的大面)", + "select the frame sketch's lines first": "請先選取框架草圖的直線", + "select the path (sketch lines across the edge)": "請選取路徑(橫跨邊的草圖直線)", + "select the rim face first": "請先選取邊緣面", + "select the sheet edge first": "請先選取鈑金邊", + "select two components": "請選取兩個元件", + "sketch is missing": "草圖不存在", + "the angle must be a number": "角度必須是數字", + "the curves must be in one sketch": "曲線必須位於同一個草圖中", + "the direction must be an axis, a sketch line or a straight edge": "方向必須是軸、草圖直線或直邊", + "the duration must be a number of seconds, 0.001 or more": "時長必須是不小於 0.001 的秒數", + "the line's sketch is gone": "該直線所在的草圖已不存在", + "the lines must be in one sketch": "直線必須位於同一個草圖中", + "the lines must be in one sketch, not the section's": "直線必須位於同一個草圖中,且不能是截面所在的草圖", + "the parts library is empty": "零件庫是空的", + "the path curves must be in one other sketch": "路徑曲線必須位於同一個另外的草圖中", + "the path's sketch is gone": "路徑所在的草圖已不存在", + "the position must be a number": "位置必須是數字", + "the preview failed": "預覽失敗", + "the profiles and curves must be in one sketch": "輪廓和曲線必須位於同一個草圖中", + "the reference face must be on the edges' body": "參考面必須位於這些邊所屬的實體上", + "the scale must be above 0": "縮放比例必須大於 0", + "the section's profiles must be in one sketch": "截面的輪廓必須位於同一個草圖中", + "the two origins are on the same component": "這兩個原點位於同一個元件上", + "trim by sketch curves, or by one plane or face": "請用草圖曲線修剪,或用一個平面或面修剪", + "use a positive nominal diameter and a pitch smaller than it": "請使用正的公稱直徑,且螺距小於公稱直徑", + "values must be finite numbers": "值必須是有限數字", + "values must be numbers or expressions": "值必須是數字或運算式" + } +} diff --git a/crates/ui-egui/src/dialogs.rs b/crates/ui-egui/src/dialogs.rs index b8931299f..6b1865bb4 100644 --- a/crates/ui-egui/src/dialogs.rs +++ b/crates/ui-egui/src/dialogs.rs @@ -6384,6 +6384,27 @@ mod awaiting_selection_tests { assert_eq!(d.error.as_deref(), Some("select a plane first")); assert!(crate::scenario::handle_at("dialog:create_issue").is_none(), "no Create Issue for a missing pick"); } + + /// A missing-pick hint reads in the user's language: the dialogs return it as English text, + /// and the dialog translates it as it shows it. + #[test] + fn missing_pick_hints_read_in_the_users_language() { + for (command, english) in [ + ("solid.move", "select bodies first"), + ("sheet.flange", "select a profile, edges or sketch lines first"), + ("plastic.lip", "select the rim face first"), + ] { + let mut h = crate::scenario::Harness::new(); + h.step(&serde_json::json!({"start":command})).unwrap(); + h.frames(2); + h.step(&serde_json::json!({"key":"Enter"})).unwrap(); + h.frames(2); + assert_eq!(h.app.dialog.as_ref().and_then(|d| d.error.as_deref()), Some(english), "{command}"); + let _japanese = crate::i18n::scope("ja"); + let shown = super::shown_error(english); + assert!(shown != english && !shown.is_ascii(), "{command} shows {shown:?}"); + } + } } #[cfg(test)]