From 09308fceb1c8299ee43693760b810eacda88b764 Mon Sep 17 00:00:00 2001 From: semmelrinde <124386289+semmelrinde@users.noreply.github.com> Date: Wed, 28 Oct 2026 12:14:41 +0000 Subject: [PATCH] Dialogs: 96 hints and refusals that read English in every language get messages (#8083) The Surface, Sheet Metal, Plastic, Frame, Move, Align, Assembly, Cam, Coupling, Sweep, Part Size and sketch editing dialogs refuse their inputs with English sentences ("select bodies first", "pick faces of one body"). The dialog translates a refusal through the catalogs as it shows it, but no catalog carried these 96, so they showed English in every language. They are added in one pending file with the eleven usual translations. Co-authored-by: Claude Opus 5.5 --- assets/locales/pending/dialog-hints.json | 1178 ++++++++++++++++++++++ crates/ui-egui/src/dialogs.rs | 21 + 2 files changed, 1199 insertions(+) create mode 100644 assets/locales/pending/dialog-hints.json diff --git a/assets/locales/pending/dialog-hints.json b/assets/locales/pending/dialog-hints.json new file mode 100644 index 000000000..4c5338542 --- /dev/null +++ b/assets/locales/pending/dialog-hints.json @@ -0,0 +1,1178 @@ +{ + "en": { + "Factor must be a positive number": "Factor must be a positive number", + "Library response is missing": "Library response is missing", + "Part length must be greater than zero and at most 2000 mm": "Part length must be greater than zero and at most 2000 mm", + "Pick a part size": "Pick a part size", + "Quantity must be at least 2": "Quantity must be at least 2", + "Select points of the sketch being edited": "Select points of the sketch being edited", + "Select the centre the pattern turns around first": "Select the centre the pattern turns around first", + "Select the curves to offset first": "Select the curves to offset first", + "Select the mirror line": "Select the mirror line", + "Select the sketch curves or points to mirror first": "Select the sketch curves or points to mirror first", + "Select the sketch curves or points to move first": "Select the sketch curves or points to move first", + "Select the sketch curves or points to pattern first": "Select the sketch curves or points to pattern first", + "Select the sketch curves or points to scale first": "Select the sketch curves or points to scale first", + "Select the sketch curves or points to transform first": "Select the sketch curves or points to transform first", + "Spacing 2 must be a non-zero number": "Spacing 2 must be a non-zero number", + "Spacing must be a non-zero number": "Spacing must be a non-zero number", + "The design changed. Reopen Change Part Size for the component.": "The design changed. Reopen Change Part Size for the component.", + "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "The direction must be an axis or a straight sketch curve that lies in the sketch plane", + "The mirror line cannot also be mirrored": "The mirror line cannot also be mirrored", + "The mirror line must be a straight curve of this sketch, not an origin axis": "The mirror line must be a straight curve of this sketch, not an origin axis", + "Type a distance or an angle to move by": "Type a distance or an angle to move by", + "`joint` must be an id or a name": "`joint` must be an id or a name", + "`params` must be an object": "`params` must be an object", + "`values` must be a list": "`values` must be a list", + "a chamfer needs a corner of exactly two lines": "a chamfer needs a corner of exactly two lines", + "a file operation is in progress": "a file operation is in progress", + "a picked curve is no longer in a sketch": "a picked curve is no longer in a sketch", + "a picked curve's sketch has not been solved": "a picked curve's sketch has not been solved", + "a picked edge has no points": "a picked edge has no points", + "a picked edge is gone": "a picked edge is gone", + "a picked edge's body is gone": "a picked edge's body is gone", + "choose a profile": "choose a profile", + "choose the cam's and the follower's joints": "choose the cam's and the follower's joints", + "choose the joints to couple": "choose the joints to couple", + "each rail's curves must be in one sketch": "each rail's curves must be in one sketch", + "feature computation ended without a result": "feature computation ended without a result", + "not a move": "not a move", + "not a number": "not a number", + "open a sketch first": "open a sketch first", + "pick a body or some of its faces": "pick a body or some of its faces", + "pick a planar face": "pick a planar face", + "pick a plane or a face as the tool": "pick a plane or a face as the tool", + "pick a size": "pick a size", + "pick edges of a body": "pick edges of a body", + "pick edges of one body": "pick edges of one body", + "pick edges of the holes to remove": "pick edges of the holes to remove", + "pick faces of one body": "pick faces of one body", + "pick faces to offset": "pick faces to offset", + "pick lines of one sketch": "pick lines of one sketch", + "pick one plane or face as the tool, or sketch curves": "pick one plane or face as the tool, or sketch curves", + "pick sections in two or more sketches": "pick sections in two or more sketches", + "pick sketch curves or edges": "pick sketch curves or edges", + "pick the face to untrim": "pick the face to untrim", + "pick what to keep": "pick what to keep", + "pick what to keep of the other surface": "pick what to keep of the other surface", + "select a direction (an axis, a sketch line or a straight edge) first": "select a direction (an axis, a sketch line or a straight edge) first", + "select a direction (an axis, a sketch line or a straight edge) for the profile to follow": "select a direction (an axis, a sketch line or a straight edge) for the profile to follow", + "select a profile, edges or sketch lines first": "select a profile, edges or sketch lines first", + "select an axis": "select an axis", + "select an axis, a straight or circular edge, or a cylinder, cone or torus face first": "select an axis, a straight or circular edge, or a cylinder, cone or torus face first", + "select bodies first": "select bodies first", + "select corner points, or the two lines of one corner": "select corner points, or the two lines of one corner", + "select one corner point, or the two lines of one corner": "select one corner point, or the two lines of one corner", + "select sheet edges first": "select sheet edges first", + "select the bend line (a sketch line) first": "select the bend line (a sketch line) first", + "select the cam's profile (a sketch profile or the cam's edges)": "select the cam's profile (a sketch profile or the cam's edges)", + "select the corner to cut first": "select the corner to cut first", + "select the corners to round first": "select the corners to round first", + "select the fixed face first (a plate's large face)": "select the fixed face first (a plate's large face)", + "select the frame sketch's lines first": "select the frame sketch's lines first", + "select the path (sketch lines across the edge)": "select the path (sketch lines across the edge)", + "select the rim face first": "select the rim face first", + "select the sheet edge first": "select the sheet edge first", + "select two components": "select two components", + "sketch is missing": "sketch is missing", + "the angle must be a number": "the angle must be a number", + "the curves must be in one sketch": "the curves must be in one sketch", + "the direction must be an axis, a sketch line or a straight edge": "the direction must be an axis, a sketch line or a straight edge", + "the duration must be a number of seconds, 0.001 or more": "the duration must be a number of seconds, 0.001 or more", + "the line's sketch is gone": "the line's sketch is gone", + "the lines must be in one sketch": "the lines must be in one sketch", + "the lines must be in one sketch, not the section's": "the lines must be in one sketch, not the section's", + "the parts library is empty": "the parts library is empty", + "the path curves must be in one other sketch": "the path curves must be in one other sketch", + "the path's sketch is gone": "the path's sketch is gone", + "the position must be a number": "the position must be a number", + "the preview failed": "the preview failed", + "the profiles and curves must be in one sketch": "the profiles and curves must be in one sketch", + "the reference face must be on the edges' body": "the reference face must be on the edges' body", + "the scale must be above 0": "the scale must be above 0", + "the section's profiles must be in one sketch": "the section's profiles must be in one sketch", + "the two origins are on the same component": "the two origins are on the same component", + "trim by sketch curves, or by one plane or face": "trim by sketch curves, or by one plane or face", + "use a positive nominal diameter and a pitch smaller than it": "use a positive nominal diameter and a pitch smaller than it", + "values must be finite numbers": "values must be finite numbers", + "values must be numbers or expressions": "values must be numbers or expressions" + }, + "ar": { + "Factor must be a positive number": "يجب أن يكون المعامل عددًا موجبًا", + "Library response is missing": "استجابة المكتبة مفقودة", + "Part length must be greater than zero and at most 2000 mm": "يجب أن يكون طول القطعة أكبر من صفر وألا يزيد على 2000 mm", + "Pick a part size": "اختر مقاسًا للقطعة", + "Quantity must be at least 2": "يجب ألا تقل الكمية عن 2", + "Select points of the sketch being edited": "حدد نقاطًا من الرسم الجاري تعديله", + "Select the centre the pattern turns around first": "حدد أولًا المركز الذي يدور النمط حوله", + "Select the curves to offset first": "حدد أولًا المنحنيات المراد إزاحتها", + "Select the mirror line": "حدد خط المرآة", + "Select the sketch curves or points to mirror first": "حدد أولًا منحنيات الرسم أو النقاط المراد عكسها", + "Select the sketch curves or points to move first": "حدد أولًا منحنيات الرسم أو النقاط المراد تحريكها", + "Select the sketch curves or points to pattern first": "حدد أولًا منحنيات الرسم أو النقاط المراد تكرارها في نمط", + "Select the sketch curves or points to scale first": "حدد أولًا منحنيات الرسم أو النقاط المراد تحجيمها", + "Select the sketch curves or points to transform first": "حدد أولًا منحنيات الرسم أو النقاط المراد تحويلها", + "Spacing 2 must be a non-zero number": "يجب أن يكون التباعد 2 عددًا غير صفري", + "Spacing must be a non-zero number": "يجب أن يكون التباعد عددًا غير صفري", + "The design changed. Reopen Change Part Size for the component.": "تغيّر التصميم. أعد فتح تغيير مقاس القطعة للمكوّن.", + "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "يجب أن يكون الاتجاه محورًا أو منحنى رسم مستقيمًا يقع في مستوى الرسم", + "The mirror line cannot also be mirrored": "لا يمكن عكس خط المرآة نفسه", + "The mirror line must be a straight curve of this sketch, not an origin axis": "يجب أن يكون خط المرآة منحنى مستقيمًا من هذا الرسم، وليس أحد محاور نقطة الأصل", + "Type a distance or an angle to move by": "اكتب مسافة أو زاوية للتحريك بها", + "`joint` must be an id or a name": "يجب أن يكون `joint` معرّفًا أو اسمًا", + "`params` must be an object": "يجب أن يكون `params` كائنًا", + "`values` must be a list": "يجب أن يكون `values` قائمة", + "a chamfer needs a corner of exactly two lines": "يحتاج الشطف إلى زاوية من خطين اثنين بالضبط", + "a file operation is in progress": "عملية ملف قيد التنفيذ", + "a picked curve is no longer in a sketch": "لم يعد المنحنى المحدد ضمن أي رسم", + "a picked curve's sketch has not been solved": "لم يُحَل رسم المنحنى المحدد بعد", + "a picked edge has no points": "لا تحتوي الحافة المحددة على نقاط", + "a picked edge is gone": "الحافة المحددة لم تعد موجودة", + "a picked edge's body is gone": "جسم الحافة المحددة لم يعد موجودًا", + "choose a profile": "اختر مقطعًا", + "choose the cam's and the follower's joints": "اختر مفصلَي الكامة والتابع", + "choose the joints to couple": "اختر المفاصل المراد ربطها", + "each rail's curves must be in one sketch": "يجب أن تكون منحنيات كل دليل في رسم واحد", + "feature computation ended without a result": "انتهى حساب الميزة دون نتيجة", + "not a move": "ليس تحريكًا", + "not a number": "ليس عددًا", + "open a sketch first": "افتح رسمًا أولًا", + "pick a body or some of its faces": "حدد جسمًا أو بعض أوجهه", + "pick a planar face": "حدد وجهًا مستويًا", + "pick a plane or a face as the tool": "حدد مستوى أو وجهًا ليكون الأداة", + "pick a size": "اختر مقاسًا", + "pick edges of a body": "حدد حوافّ جسم", + "pick edges of one body": "حدد حوافّ جسم واحد", + "pick edges of the holes to remove": "حدد حواف الثقوب المراد إزالتها", + "pick faces of one body": "حدد أوجه جسم واحد", + "pick faces to offset": "حدد الأوجه المراد إزاحتها", + "pick lines of one sketch": "حدد خطوطًا من رسم واحد", + "pick one plane or face as the tool, or sketch curves": "حدد مستوى واحدًا أو وجهًا واحدًا ليكون الأداة، أو منحنيات رسم", + "pick sections in two or more sketches": "حدد مقاطع في رسمين أو أكثر", + "pick sketch curves or edges": "حدد منحنيات رسم أو حوافّ", + "pick the face to untrim": "حدد الوجه المراد إلغاء قصه", + "pick what to keep": "حدد ما تريد الإبقاء عليه", + "pick what to keep of the other surface": "حدد ما تريد الإبقاء عليه من السطح الآخر", + "select a direction (an axis, a sketch line or a straight edge) first": "حدد أولًا اتجاهًا (محورًا أو خط رسم أو حافة مستقيمة)", + "select a direction (an axis, a sketch line or a straight edge) for the profile to follow": "حدد اتجاهًا (محورًا أو خط رسم أو حافة مستقيمة) ليتبعه المقطع", + "select a profile, edges or sketch lines first": "حدد أولًا مقطعًا أو حوافّ أو خطوط رسم", + "select an axis": "حدد محورًا", + "select an axis, a straight or circular edge, or a cylinder, cone or torus face first": "حدد أولًا محورًا أو حافة مستقيمة أو دائرية أو وجه أسطوانة أو مخروط أو طارة", + "select bodies first": "حدد الأجسام أولًا", + "select corner points, or the two lines of one corner": "حدد نقاط الزوايا، أو الخطين اللذين يكوّنان زاوية واحدة", + "select one corner point, or the two lines of one corner": "حدد نقطة زاوية واحدة، أو الخطين اللذين يكوّنان زاوية واحدة", + "select sheet edges first": "حدد حواف الصفيحة أولًا", + "select the bend line (a sketch line) first": "حدد خط الثني (خط رسم) أولًا", + "select the cam's profile (a sketch profile or the cam's edges)": "حدد مقطع الكامة (مقطع رسم أو حواف الكامة)", + "select the corner to cut first": "حدد أولًا الزاوية المراد قطعها", + "select the corners to round first": "حدد أولًا الزوايا المراد تدويرها", + "select the fixed face first (a plate's large face)": "حدد أولًا الوجه الثابت (الوجه الكبير للوح)", + "select the frame sketch's lines first": "حدد أولًا خطوط رسم الهيكل", + "select the path (sketch lines across the edge)": "حدد المسار (خطوط رسم عبر الحافة)", + "select the rim face first": "حدد وجه الإطار أولًا", + "select the sheet edge first": "حدد حافة الصفيحة أولًا", + "select two components": "حدد مكوّنين اثنين", + "sketch is missing": "الرسم مفقود", + "the angle must be a number": "يجب أن تكون الزاوية عددًا", + "the curves must be in one sketch": "يجب أن تكون المنحنيات في رسم واحد", + "the direction must be an axis, a sketch line or a straight edge": "يجب أن يكون الاتجاه محورًا أو خط رسم أو حافة مستقيمة", + "the duration must be a number of seconds, 0.001 or more": "يجب أن تكون المدة عددًا من الثواني، 0.001 أو أكثر", + "the line's sketch is gone": "رسم الخط لم يعد موجودًا", + "the lines must be in one sketch": "يجب أن تكون الخطوط في رسم واحد", + "the lines must be in one sketch, not the section's": "يجب أن تكون الخطوط في رسم واحد، غير رسم المقطع العرضي", + "the parts library is empty": "مكتبة القطع فارغة", + "the path curves must be in one other sketch": "يجب أن تكون منحنيات المسار في رسم آخر واحد", + "the path's sketch is gone": "رسم المسار لم يعد موجودًا", + "the position must be a number": "يجب أن يكون الموضع عددًا", + "the preview failed": "فشلت المعاينة", + "the profiles and curves must be in one sketch": "يجب أن تكون المقاطع والمنحنيات في رسم واحد", + "the reference face must be on the edges' body": "يجب أن يكون وجه المرجع على جسم الحواف", + "the scale must be above 0": "يجب أن يكون المقياس أكبر من 0", + "the section's profiles must be in one sketch": "يجب أن تكون مقاطع المقطع العرضي في رسم واحد", + "the two origins are on the same component": "يقع الأصلان على المكوّن نفسه", + "trim by sketch curves, or by one plane or face": "اقصّ بمنحنيات رسم، أو بمستوى واحد أو وجه واحد", + "use a positive nominal diameter and a pitch smaller than it": "استخدم قطرًا اسميًا موجبًا وخطوة أصغر منه", + "values must be finite numbers": "يجب أن تكون القيم أعدادًا منتهية", + "values must be numbers or expressions": "يجب أن تكون القيم أعدادًا أو تعابير" + }, + "de": { + "Factor must be a positive number": "Der Faktor muss eine positive Zahl sein", + "Library response is missing": "Die Antwort der Bibliothek fehlt", + "Part length must be greater than zero and at most 2000 mm": "Die Bauteillänge muss größer als null und höchstens 2000 mm sein", + "Pick a part size": "Eine Bauteilgröße wählen", + "Quantity must be at least 2": "Die Anzahl muss mindestens 2 sein", + "Select points of the sketch being edited": "Punkte der bearbeiteten Skizze auswählen", + "Select the centre the pattern turns around first": "Zuerst den Mittelpunkt auswählen, um den sich das Muster dreht", + "Select the curves to offset first": "Zuerst die zu versetzenden Kurven auswählen", + "Select the mirror line": "Die Spiegellinie auswählen", + "Select the sketch curves or points to mirror first": "Zuerst die zu spiegelnden Skizzenkurven oder -punkte auswählen", + "Select the sketch curves or points to move first": "Zuerst die zu verschiebenden Skizzenkurven oder -punkte auswählen", + "Select the sketch curves or points to pattern first": "Zuerst die Skizzenkurven oder -punkte für das Muster auswählen", + "Select the sketch curves or points to scale first": "Zuerst die zu skalierenden Skizzenkurven oder -punkte auswählen", + "Select the sketch curves or points to transform first": "Zuerst die zu transformierenden Skizzenkurven oder -punkte auswählen", + "Spacing 2 must be a non-zero number": "Abstand 2 muss eine Zahl ungleich null sein", + "Spacing must be a non-zero number": "Der Abstand muss eine Zahl ungleich null sein", + "The design changed. Reopen Change Part Size for the component.": "Das Design hat sich geändert. Bauteilgröße ändern für die Komponente erneut öffnen.", + "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "Die Richtung muss eine Achse oder eine gerade Skizzenkurve in der Skizzenebene sein", + "The mirror line cannot also be mirrored": "Die Spiegellinie kann nicht gleichzeitig gespiegelt werden", + "The mirror line must be a straight curve of this sketch, not an origin axis": "Die Spiegellinie muss eine gerade Kurve dieser Skizze sein, keine Ursprungsachse", + "Type a distance or an angle to move by": "Einen Abstand oder einen Winkel zum Verschieben eingeben", + "`joint` must be an id or a name": "`joint` muss eine ID oder ein Name sein", + "`params` must be an object": "`params` muss ein Objekt sein", + "`values` must be a list": "`values` muss eine Liste sein", + "a chamfer needs a corner of exactly two lines": "eine Abschrägung braucht eine Ecke aus genau zwei Linien", + "a file operation is in progress": "ein Dateivorgang läuft gerade", + "a picked curve is no longer in a sketch": "eine gewählte Kurve liegt in keiner Skizze mehr", + "a picked curve's sketch has not been solved": "die Skizze einer gewählten Kurve wurde nicht gelöst", + "a picked edge has no points": "eine gewählte Kante hat keine Punkte", + "a picked edge is gone": "eine gewählte Kante existiert nicht mehr", + "a picked edge's body is gone": "der Körper einer gewählten Kante existiert nicht mehr", + "choose a profile": "ein Profil wählen", + "choose the cam's and the follower's joints": "die Gelenke von Nocken und Stößel wählen", + "choose the joints to couple": "die zu koppelnden Gelenke wählen", + "each rail's curves must be in one sketch": "die Kurven jeder Führungskurve müssen in derselben Skizze liegen", + "feature computation ended without a result": "die Berechnung des Merkmals wurde ohne Ergebnis beendet", + "not a move": "keine Verschiebung", + "not a number": "keine Zahl", + "open a sketch first": "zuerst eine Skizze öffnen", + "pick a body or some of its faces": "einen Körper oder einige seiner Flächen wählen", + "pick a planar face": "eine ebene Fläche wählen", + "pick a plane or a face as the tool": "eine Ebene oder eine Fläche als Werkzeug wählen", + "pick a size": "eine Größe wählen", + "pick edges of a body": "Kanten eines Körpers wählen", + "pick edges of one body": "Kanten eines einzigen Körpers wählen", + "pick edges of the holes to remove": "die Kanten der zu entfernenden Bohrungen wählen", + "pick faces of one body": "Flächen eines einzigen Körpers wählen", + "pick faces to offset": "zu versetzende Flächen wählen", + "pick lines of one sketch": "Linien einer einzigen Skizze wählen", + "pick one plane or face as the tool, or sketch curves": "eine Ebene oder Fläche als Werkzeug wählen, oder Skizzenkurven", + "pick sections in two or more sketches": "Querschnitte in zwei oder mehr Skizzen wählen", + "pick sketch curves or edges": "Skizzenkurven oder Kanten wählen", + "pick the face to untrim": "die Fläche wählen, deren Trimmung aufgehoben werden soll", + "pick what to keep": "wählen, was behalten werden soll", + "pick what to keep of the other surface": "wählen, was vom anderen Flächenkörper behalten werden soll", + "select a direction (an axis, a sketch line or a straight edge) first": "zuerst eine Richtung auswählen (eine Achse, eine Skizzenlinie oder eine gerade Kante)", + "select a direction (an axis, a sketch line or a straight edge) for the profile to follow": "eine Richtung auswählen (eine Achse, eine Skizzenlinie oder eine gerade Kante), der das Profil folgen soll", + "select a profile, edges or sketch lines first": "zuerst ein Profil, Kanten oder Skizzenlinien auswählen", + "select an axis": "eine Achse auswählen", + "select an axis, a straight or circular edge, or a cylinder, cone or torus face first": "zuerst eine Achse, eine gerade oder kreisförmige Kante oder eine Zylinder-, Kegel- oder Torusfläche auswählen", + "select bodies first": "zuerst Körper auswählen", + "select corner points, or the two lines of one corner": "Eckpunkte oder die zwei Linien einer Ecke auswählen", + "select one corner point, or the two lines of one corner": "einen Eckpunkt oder die zwei Linien einer Ecke auswählen", + "select sheet edges first": "zuerst Blechkanten auswählen", + "select the bend line (a sketch line) first": "zuerst die Biegelinie (eine Skizzenlinie) auswählen", + "select the cam's profile (a sketch profile or the cam's edges)": "das Profil des Nockens auswählen (ein Skizzenprofil oder die Kanten des Nockens)", + "select the corner to cut first": "zuerst die abzuschrägende Ecke auswählen", + "select the corners to round first": "zuerst die zu verrundenden Ecken auswählen", + "select the fixed face first (a plate's large face)": "zuerst die feste Fläche auswählen (die große Fläche einer Platte)", + "select the frame sketch's lines first": "zuerst die Linien der Rahmenskizze auswählen", + "select the path (sketch lines across the edge)": "den Pfad auswählen (Skizzenlinien, die die Kante überqueren)", + "select the rim face first": "zuerst die Randfläche auswählen", + "select the sheet edge first": "zuerst die Blechkante auswählen", + "select two components": "zwei Komponenten auswählen", + "sketch is missing": "die Skizze fehlt", + "the angle must be a number": "der Winkel muss eine Zahl sein", + "the curves must be in one sketch": "die Kurven müssen in einer Skizze liegen", + "the direction must be an axis, a sketch line or a straight edge": "die Richtung muss eine Achse, eine Skizzenlinie oder eine gerade Kante sein", + "the duration must be a number of seconds, 0.001 or more": "die Dauer muss eine Zahl in Sekunden sein, mindestens 0.001", + "the line's sketch is gone": "die Skizze der Linie existiert nicht mehr", + "the lines must be in one sketch": "die Linien müssen in einer Skizze liegen", + "the lines must be in one sketch, not the section's": "die Linien müssen in einer Skizze liegen, nicht in der des Querschnitts", + "the parts library is empty": "die Bauteilbibliothek ist leer", + "the path curves must be in one other sketch": "die Pfadkurven müssen in einer einzigen anderen Skizze liegen", + "the path's sketch is gone": "die Skizze des Pfads existiert nicht mehr", + "the position must be a number": "die Position muss eine Zahl sein", + "the preview failed": "die Vorschau ist fehlgeschlagen", + "the profiles and curves must be in one sketch": "die Profile und Kurven müssen in einer Skizze liegen", + "the reference face must be on the edges' body": "die Referenzfläche muss auf dem Körper der Kanten liegen", + "the scale must be above 0": "der Maßstab muss größer als 0 sein", + "the section's profiles must be in one sketch": "die Profile des Querschnitts müssen in einer Skizze liegen", + "the two origins are on the same component": "die beiden Ursprünge liegen auf derselben Komponente", + "trim by sketch curves, or by one plane or face": "mit Skizzenkurven oder mit einer Ebene oder Fläche trimmen", + "use a positive nominal diameter and a pitch smaller than it": "einen positiven Nenndurchmesser und eine kleinere Steigung verwenden", + "values must be finite numbers": "Werte müssen endliche Zahlen sein", + "values must be numbers or expressions": "Werte müssen Zahlen oder Ausdrücke sein" + }, + "es": { + "Factor must be a positive number": "El factor debe ser un número positivo", + "Library response is missing": "Falta la respuesta de la biblioteca", + "Part length must be greater than zero and at most 2000 mm": "La longitud de la pieza debe ser mayor que cero y como máximo 2000 mm", + "Pick a part size": "Elige un tamaño de pieza", + "Quantity must be at least 2": "La cantidad debe ser al menos 2", + "Select points of the sketch being edited": "Selecciona puntos del boceto que se está editando", + "Select the centre the pattern turns around first": "Selecciona primero el centro alrededor del cual gira el patrón", + "Select the curves to offset first": "Selecciona primero las curvas que se van a desfasar", + "Select the mirror line": "Selecciona la línea de simetría", + "Select the sketch curves or points to mirror first": "Selecciona primero las curvas o puntos del boceto que se van a reflejar", + "Select the sketch curves or points to move first": "Selecciona primero las curvas o puntos del boceto que se van a mover", + "Select the sketch curves or points to pattern first": "Selecciona primero las curvas o puntos del boceto para el patrón", + "Select the sketch curves or points to scale first": "Selecciona primero las curvas o puntos del boceto que se van a escalar", + "Select the sketch curves or points to transform first": "Selecciona primero las curvas o puntos del boceto que se van a transformar", + "Spacing 2 must be a non-zero number": "El espaciado 2 debe ser un número distinto de cero", + "Spacing must be a non-zero number": "El espaciado debe ser un número distinto de cero", + "The design changed. Reopen Change Part Size for the component.": "El diseño ha cambiado. Vuelve a abrir Cambiar tamaño de pieza para el componente.", + "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "La dirección debe ser un eje o una curva recta del boceto que esté en el plano del boceto", + "The mirror line cannot also be mirrored": "La línea de simetría no puede reflejarse también", + "The mirror line must be a straight curve of this sketch, not an origin axis": "La línea de simetría debe ser una curva recta de este boceto, no un eje del origen", + "Type a distance or an angle to move by": "Escribe una distancia o un ángulo para mover", + "`joint` must be an id or a name": "`joint` debe ser un id o un nombre", + "`params` must be an object": "`params` debe ser un objeto", + "`values` must be a list": "`values` debe ser una lista", + "a chamfer needs a corner of exactly two lines": "un chaflán necesita una esquina de exactamente dos líneas", + "a file operation is in progress": "hay una operación de archivo en curso", + "a picked curve is no longer in a sketch": "una curva elegida ya no está en un boceto", + "a picked curve's sketch has not been solved": "el boceto de una curva elegida no se ha resuelto", + "a picked edge has no points": "una arista elegida no tiene puntos", + "a picked edge is gone": "una arista elegida ya no existe", + "a picked edge's body is gone": "el cuerpo de una arista elegida ya no existe", + "choose a profile": "elige un perfil", + "choose the cam's and the follower's joints": "elige las uniones de la leva y del seguidor", + "choose the joints to couple": "elige las uniones que acoplar", + "each rail's curves must be in one sketch": "las curvas de cada guía deben estar en un solo boceto", + "feature computation ended without a result": "el cálculo de la operación terminó sin resultado", + "not a move": "no es un movimiento", + "not a number": "no es un número", + "open a sketch first": "abre primero un boceto", + "pick a body or some of its faces": "elige un cuerpo o algunas de sus caras", + "pick a planar face": "elige una cara plana", + "pick a plane or a face as the tool": "elige un plano o una cara como herramienta", + "pick a size": "elige un tamaño", + "pick edges of a body": "elige aristas de un cuerpo", + "pick edges of one body": "elige aristas de un solo cuerpo", + "pick edges of the holes to remove": "elige las aristas de los agujeros que quitar", + "pick faces of one body": "elige caras de un solo cuerpo", + "pick faces to offset": "elige las caras que desfasar", + "pick lines of one sketch": "elige líneas de un solo boceto", + "pick one plane or face as the tool, or sketch curves": "elige un plano o una cara como herramienta, o curvas de boceto", + "pick sections in two or more sketches": "elige secciones en dos o más bocetos", + "pick sketch curves or edges": "elige curvas de boceto o aristas", + "pick the face to untrim": "elige la cara a la que quitar el recorte", + "pick what to keep": "elige qué conservar", + "pick what to keep of the other surface": "elige qué conservar de la otra superficie", + "select a direction (an axis, a sketch line or a straight edge) first": "selecciona primero una dirección (un eje, una línea de boceto o una arista recta)", + "select a direction (an axis, a sketch line or a straight edge) for the profile to follow": "selecciona una dirección (un eje, una línea de boceto o una arista recta) que seguirá el perfil", + "select a profile, edges or sketch lines first": "selecciona primero un perfil, aristas o líneas de boceto", + "select an axis": "selecciona un eje", + "select an axis, a straight or circular edge, or a cylinder, cone or torus face first": "selecciona primero un eje, una arista recta o circular, o una cara cilíndrica, cónica o toroidal", + "select bodies first": "selecciona primero cuerpos", + "select corner points, or the two lines of one corner": "selecciona puntos de esquina, o las dos líneas de una esquina", + "select one corner point, or the two lines of one corner": "selecciona un punto de esquina, o las dos líneas de una esquina", + "select sheet edges first": "selecciona primero aristas de chapa", + "select the bend line (a sketch line) first": "selecciona primero la línea de plegado (una línea de boceto)", + "select the cam's profile (a sketch profile or the cam's edges)": "selecciona el perfil de la leva (un perfil de boceto o las aristas de la leva)", + "select the corner to cut first": "selecciona primero la esquina que cortar", + "select the corners to round first": "selecciona primero las esquinas que redondear", + "select the fixed face first (a plate's large face)": "selecciona primero la cara fija (la cara grande de una placa)", + "select the frame sketch's lines first": "selecciona primero las líneas del boceto del marco", + "select the path (sketch lines across the edge)": "selecciona la trayectoria (líneas de boceto a lo largo de la arista)", + "select the rim face first": "selecciona primero la cara del borde", + "select the sheet edge first": "selecciona primero la arista de la chapa", + "select two components": "selecciona dos componentes", + "sketch is missing": "falta el boceto", + "the angle must be a number": "el ángulo debe ser un número", + "the curves must be in one sketch": "las curvas deben estar en un solo boceto", + "the direction must be an axis, a sketch line or a straight edge": "la dirección debe ser un eje, una línea de boceto o una arista recta", + "the duration must be a number of seconds, 0.001 or more": "la duración debe ser un número de segundos, 0.001 o más", + "the line's sketch is gone": "el boceto de la línea ya no existe", + "the lines must be in one sketch": "las líneas deben estar en un solo boceto", + "the lines must be in one sketch, not the section's": "las líneas deben estar en un solo boceto, no en el de la sección", + "the parts library is empty": "la biblioteca de piezas está vacía", + "the path curves must be in one other sketch": "las curvas de la trayectoria deben estar en un solo boceto distinto", + "the path's sketch is gone": "el boceto de la trayectoria ya no existe", + "the position must be a number": "la posición debe ser un número", + "the preview failed": "falló la vista previa", + "the profiles and curves must be in one sketch": "los perfiles y las curvas deben estar en un solo boceto", + "the reference face must be on the edges' body": "la cara de referencia debe estar en el cuerpo de las aristas", + "the scale must be above 0": "la escala debe ser mayor que 0", + "the section's profiles must be in one sketch": "los perfiles de la sección deben estar en un solo boceto", + "the two origins are on the same component": "los dos orígenes están en el mismo componente", + "trim by sketch curves, or by one plane or face": "recorta con curvas de boceto, o con un plano o una cara", + "use a positive nominal diameter and a pitch smaller than it": "usa un diámetro nominal positivo y un paso menor que él", + "values must be finite numbers": "los valores deben ser números finitos", + "values must be numbers or expressions": "los valores deben ser números o expresiones" + }, + "fr": { + "Factor must be a positive number": "Le facteur doit être un nombre strictement positif", + "Library response is missing": "La réponse de la bibliothèque est manquante", + "Part length must be greater than zero and at most 2000 mm": "La longueur de la pièce doit être supérieure à zéro et d'au plus 2000 mm", + "Pick a part size": "Choisir une taille de pièce", + "Quantity must be at least 2": "La quantité doit être d'au moins 2", + "Select points of the sketch being edited": "Sélectionner des points de l'esquisse en cours de modification", + "Select the centre the pattern turns around first": "Sélectionner d'abord le centre autour duquel la répétition pivote", + "Select the curves to offset first": "Sélectionner d'abord les courbes à décaler", + "Select the mirror line": "Sélectionner la ligne de symétrie", + "Select the sketch curves or points to mirror first": "Sélectionner d'abord les courbes ou points d'esquisse à symétriser", + "Select the sketch curves or points to move first": "Sélectionner d'abord les courbes ou points d'esquisse à déplacer", + "Select the sketch curves or points to pattern first": "Sélectionner d'abord les courbes ou points d'esquisse à répéter", + "Select the sketch curves or points to scale first": "Sélectionner d'abord les courbes ou points d'esquisse à mettre à l'échelle", + "Select the sketch curves or points to transform first": "Sélectionner d'abord les courbes ou points d'esquisse à transformer", + "Spacing 2 must be a non-zero number": "L'espacement 2 doit être un nombre non nul", + "Spacing must be a non-zero number": "L'espacement doit être un nombre non nul", + "The design changed. Reopen Change Part Size for the component.": "La conception a changé. Rouvrir Changer la taille de la pièce pour le composant.", + "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "La direction doit être un axe ou une courbe d'esquisse droite située dans le plan de l'esquisse", + "The mirror line cannot also be mirrored": "La ligne de symétrie ne peut pas être elle-même symétrisée", + "The mirror line must be a straight curve of this sketch, not an origin axis": "La ligne de symétrie doit être une courbe droite de cette esquisse, et non un axe de l'origine", + "Type a distance or an angle to move by": "Saisir une distance ou un angle de déplacement", + "`joint` must be an id or a name": "`joint` doit être un identifiant ou un nom", + "`params` must be an object": "`params` doit être un objet", + "`values` must be a list": "`values` doit être une liste", + "a chamfer needs a corner of exactly two lines": "un chanfrein nécessite un coin formé d'exactement deux lignes", + "a file operation is in progress": "une opération sur un fichier est en cours", + "a picked curve is no longer in a sketch": "une courbe sélectionnée ne se trouve plus dans une esquisse", + "a picked curve's sketch has not been solved": "l'esquisse d'une courbe sélectionnée n'a pas été résolue", + "a picked edge has no points": "une arête sélectionnée n'a aucun point", + "a picked edge is gone": "une arête sélectionnée n'existe plus", + "a picked edge's body is gone": "le corps d'une arête sélectionnée n'existe plus", + "choose a profile": "choisir un profilé", + "choose the cam's and the follower's joints": "choisir les liaisons de la came et du suiveur", + "choose the joints to couple": "choisir les liaisons à coupler", + "each rail's curves must be in one sketch": "les courbes de chaque rail de guidage doivent être dans une seule esquisse", + "feature computation ended without a result": "le calcul de la fonction s'est terminé sans résultat", + "not a move": "pas un déplacement", + "not a number": "pas un nombre", + "open a sketch first": "ouvrir d'abord une esquisse", + "pick a body or some of its faces": "choisir un corps ou certaines de ses faces", + "pick a planar face": "choisir une face plane", + "pick a plane or a face as the tool": "choisir un plan ou une face comme outil", + "pick a size": "choisir une taille", + "pick edges of a body": "choisir des arêtes d'un corps", + "pick edges of one body": "choisir des arêtes d'un seul corps", + "pick edges of the holes to remove": "choisir les arêtes des perçages à supprimer", + "pick faces of one body": "choisir des faces d'un seul corps", + "pick faces to offset": "choisir les faces à décaler", + "pick lines of one sketch": "choisir des lignes d'une seule esquisse", + "pick one plane or face as the tool, or sketch curves": "choisir un plan ou une face comme outil, ou des courbes d'esquisse", + "pick sections in two or more sketches": "choisir des sections dans au moins deux esquisses", + "pick sketch curves or edges": "choisir des courbes d'esquisse ou des arêtes", + "pick the face to untrim": "choisir la face dont l'ajustement doit être annulé", + "pick what to keep": "choisir ce qu'il faut conserver", + "pick what to keep of the other surface": "choisir ce qu'il faut conserver de l'autre surface", + "select a direction (an axis, a sketch line or a straight edge) first": "sélectionner d'abord une direction (un axe, une ligne d'esquisse ou une arête droite)", + "select a direction (an axis, a sketch line or a straight edge) for the profile to follow": "sélectionner une direction (un axe, une ligne d'esquisse ou une arête droite) que le profil doit suivre", + "select a profile, edges or sketch lines first": "sélectionner d'abord un profil, des arêtes ou des lignes d'esquisse", + "select an axis": "sélectionner un axe", + "select an axis, a straight or circular edge, or a cylinder, cone or torus face first": "sélectionner d'abord un axe, une arête droite ou circulaire, ou une face cylindrique, conique ou torique", + "select bodies first": "sélectionner d'abord des corps", + "select corner points, or the two lines of one corner": "sélectionner des points de coin, ou les deux lignes d'un coin", + "select one corner point, or the two lines of one corner": "sélectionner un point de coin, ou les deux lignes d'un coin", + "select sheet edges first": "sélectionner d'abord des arêtes de tôle", + "select the bend line (a sketch line) first": "sélectionner d'abord la ligne de pli (une ligne d'esquisse)", + "select the cam's profile (a sketch profile or the cam's edges)": "sélectionner le profil de la came (un profil d'esquisse ou les arêtes de la came)", + "select the corner to cut first": "sélectionner d'abord le coin à chanfreiner", + "select the corners to round first": "sélectionner d'abord les coins à arrondir", + "select the fixed face first (a plate's large face)": "sélectionner d'abord la face fixe (la grande face d'une plaque)", + "select the frame sketch's lines first": "sélectionner d'abord les lignes de l'esquisse de la structure", + "select the path (sketch lines across the edge)": "sélectionner la trajectoire (lignes d'esquisse qui traversent l'arête)", + "select the rim face first": "sélectionner d'abord la face du bord", + "select the sheet edge first": "sélectionner d'abord l'arête de la tôle", + "select two components": "sélectionner deux composants", + "sketch is missing": "l'esquisse est manquante", + "the angle must be a number": "l'angle doit être un nombre", + "the curves must be in one sketch": "les courbes doivent être dans une seule esquisse", + "the direction must be an axis, a sketch line or a straight edge": "la direction doit être un axe, une ligne d'esquisse ou une arête droite", + "the duration must be a number of seconds, 0.001 or more": "la durée doit être un nombre de secondes, d'au moins 0.001", + "the line's sketch is gone": "l'esquisse de la ligne n'existe plus", + "the lines must be in one sketch": "les lignes doivent être dans une seule esquisse", + "the lines must be in one sketch, not the section's": "les lignes doivent être dans une seule esquisse, pas celle de la section", + "the parts library is empty": "la bibliothèque de pièces est vide", + "the path curves must be in one other sketch": "les courbes de la trajectoire doivent être dans une seule autre esquisse", + "the path's sketch is gone": "l'esquisse de la trajectoire n'existe plus", + "the position must be a number": "la position doit être un nombre", + "the preview failed": "l'aperçu a échoué", + "the profiles and curves must be in one sketch": "les profils et les courbes doivent être dans une seule esquisse", + "the reference face must be on the edges' body": "la face de référence doit appartenir au corps des arêtes", + "the scale must be above 0": "l'échelle doit être supérieure à 0", + "the section's profiles must be in one sketch": "les profils de la section doivent être dans une seule esquisse", + "the two origins are on the same component": "les deux origines se trouvent sur le même composant", + "trim by sketch curves, or by one plane or face": "ajuster avec des courbes d'esquisse, ou avec un plan ou une face", + "use a positive nominal diameter and a pitch smaller than it": "utiliser un diamètre nominal positif et un pas inférieur à ce diamètre", + "values must be finite numbers": "les valeurs doivent être des nombres finis", + "values must be numbers or expressions": "les valeurs doivent être des nombres ou des expressions" + }, + "he": { + "Factor must be a positive number": "המקדם חייב להיות מספר חיובי", + "Library response is missing": "תגובת הספרייה חסרה", + "Part length must be greater than zero and at most 2000 mm": "אורך החלק חייב להיות גדול מאפס ולא יותר מ־2000 mm", + "Pick a part size": "יש לבחור גודל לחלק", + "Quantity must be at least 2": "הכמות חייבת להיות 2 לפחות", + "Select points of the sketch being edited": "יש לבחור נקודות של הסקיצה הנערכת", + "Select the centre the pattern turns around first": "יש לבחור תחילה את המרכז שסביבו המערך מסתובב", + "Select the curves to offset first": "יש לבחור תחילה את העקומות להיסט", + "Select the mirror line": "יש לבחור את קו השיקוף", + "Select the sketch curves or points to mirror first": "יש לבחור תחילה את עקומות הסקיצה או הנקודות לשיקוף", + "Select the sketch curves or points to move first": "יש לבחור תחילה את עקומות הסקיצה או הנקודות להזזה", + "Select the sketch curves or points to pattern first": "יש לבחור תחילה את עקומות הסקיצה או הנקודות למערך", + "Select the sketch curves or points to scale first": "יש לבחור תחילה את עקומות הסקיצה או הנקודות לשינוי קנה מידה", + "Select the sketch curves or points to transform first": "יש לבחור תחילה את עקומות הסקיצה או הנקודות להתמרה", + "Spacing 2 must be a non-zero number": "מרווח 2 חייב להיות מספר שונה מאפס", + "Spacing must be a non-zero number": "המרווח חייב להיות מספר שונה מאפס", + "The design changed. Reopen Change Part Size for the component.": "התכן השתנה. יש לפתוח מחדש את שינוי גודל חלק עבור הרכיב.", + "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "הכיוון חייב להיות ציר או עקומת סקיצה ישרה הנמצאת במישור הסקיצה", + "The mirror line cannot also be mirrored": "אי אפשר לשקף גם את קו השיקוף עצמו", + "The mirror line must be a straight curve of this sketch, not an origin axis": "קו השיקוף חייב להיות עקומה ישרה של הסקיצה הזו, ולא אחד מצירי הראשית", + "Type a distance or an angle to move by": "יש להקליד מרחק או זווית להזזה", + "`joint` must be an id or a name": "`joint` חייב להיות מזהה או שם", + "`params` must be an object": "`params` חייב להיות אובייקט", + "`values` must be a list": "`values` חייב להיות רשימה", + "a chamfer needs a corner of exactly two lines": "פאזה דורשת פינה של שני קווים בדיוק", + "a file operation is in progress": "פעולת קובץ מתבצעת כעת", + "a picked curve is no longer in a sketch": "העקומה שנבחרה כבר אינה בסקיצה", + "a picked curve's sketch has not been solved": "הסקיצה של העקומה שנבחרה טרם נפתרה", + "a picked edge has no points": "למקצוע שנבחר אין נקודות", + "a picked edge is gone": "המקצוע שנבחר כבר לא קיים", + "a picked edge's body is gone": "הגוף של המקצוע שנבחר כבר לא קיים", + "choose a profile": "יש לבחור פרופיל", + "choose the cam's and the follower's joints": "יש לבחור את מפרק הפיקה ואת מפרק העוקב", + "choose the joints to couple": "יש לבחור את המפרקים לצימוד", + "each rail's curves must be in one sketch": "עקומות כל מסילה חייבות להיות בסקיצה אחת", + "feature computation ended without a result": "חישוב הפיצ'ר הסתיים ללא תוצאה", + "not a move": "זו אינה הזזה", + "not a number": "לא מספר", + "open a sketch first": "יש לפתוח סקיצה תחילה", + "pick a body or some of its faces": "יש לבחור גוף או כמה מפאותיו", + "pick a planar face": "יש לבחור פאה מישורית", + "pick a plane or a face as the tool": "יש לבחור מישור או פאה ככלי", + "pick a size": "יש לבחור גודל", + "pick edges of a body": "יש לבחור מקצועות של גוף", + "pick edges of one body": "יש לבחור מקצועות של גוף אחד", + "pick edges of the holes to remove": "יש לבחור מקצועות של החורים להסרה", + "pick faces of one body": "יש לבחור פאות של גוף אחד", + "pick faces to offset": "יש לבחור פאות להיסט", + "pick lines of one sketch": "יש לבחור קווים מסקיצה אחת", + "pick one plane or face as the tool, or sketch curves": "יש לבחור מישור אחד או פאה אחת ככלי, או עקומות סקיצה", + "pick sections in two or more sketches": "יש לבחור חתכים בשתי סקיצות או יותר", + "pick sketch curves or edges": "יש לבחור עקומות סקיצה או מקצועות", + "pick the face to untrim": "יש לבחור את הפאה לביטול גיזום", + "pick what to keep": "יש לבחור מה לשמור", + "pick what to keep of the other surface": "יש לבחור מה לשמור מהמשטח השני", + "select a direction (an axis, a sketch line or a straight edge) first": "יש לבחור תחילה כיוון (ציר, קו סקיצה או מקצוע ישר)", + "select a direction (an axis, a sketch line or a straight edge) for the profile to follow": "יש לבחור כיוון (ציר, קו סקיצה או מקצוע ישר) שהפרופיל ילך לאורכו", + "select a profile, edges or sketch lines first": "יש לבחור תחילה פרופיל, מקצועות או קווי סקיצה", + "select an axis": "יש לבחור ציר", + "select an axis, a straight or circular edge, or a cylinder, cone or torus face first": "יש לבחור תחילה ציר, מקצוע ישר או מעגלי, או פאה של גליל, חרוט או טורוס", + "select bodies first": "יש לבחור גופים תחילה", + "select corner points, or the two lines of one corner": "יש לבחור נקודות פינה, או את שני הקווים של פינה אחת", + "select one corner point, or the two lines of one corner": "יש לבחור נקודת פינה אחת, או את שני הקווים של פינה אחת", + "select sheet edges first": "יש לבחור תחילה מקצועות של הפח", + "select the bend line (a sketch line) first": "יש לבחור תחילה את קו הכיפוף (קו סקיצה)", + "select the cam's profile (a sketch profile or the cam's edges)": "יש לבחור את הפרופיל של הפיקה (פרופיל סקיצה או מקצועות הפיקה)", + "select the corner to cut first": "יש לבחור תחילה את הפינה לחיתוך", + "select the corners to round first": "יש לבחור תחילה את הפינות לעיגול", + "select the fixed face first (a plate's large face)": "יש לבחור תחילה את הפאה הקבועה (הפאה הגדולה של לוח)", + "select the frame sketch's lines first": "יש לבחור תחילה את קווי סקיצת המסגרת", + "select the path (sketch lines across the edge)": "יש לבחור את המסלול (קווי סקיצה על פני המקצוע)", + "select the rim face first": "יש לבחור תחילה את פאת השפה", + "select the sheet edge first": "יש לבחור תחילה את מקצוע הפח", + "select two components": "יש לבחור שני רכיבים", + "sketch is missing": "הסקיצה חסרה", + "the angle must be a number": "הזווית חייבת להיות מספר", + "the curves must be in one sketch": "העקומות חייבות להיות בסקיצה אחת", + "the direction must be an axis, a sketch line or a straight edge": "הכיוון חייב להיות ציר, קו סקיצה או מקצוע ישר", + "the duration must be a number of seconds, 0.001 or more": "משך הזמן חייב להיות מספר שניות, 0.001 או יותר", + "the line's sketch is gone": "הסקיצה של הקו כבר לא קיימת", + "the lines must be in one sketch": "הקווים חייבים להיות בסקיצה אחת", + "the lines must be in one sketch, not the section's": "הקווים חייבים להיות בסקיצה אחת, ולא בסקיצת החתך", + "the parts library is empty": "ספריית החלקים ריקה", + "the path curves must be in one other sketch": "עקומות המסלול חייבות להיות בסקיצה אחרת אחת", + "the path's sketch is gone": "הסקיצה של המסלול כבר לא קיימת", + "the position must be a number": "המיקום חייב להיות מספר", + "the preview failed": "התצוגה המקדימה נכשלה", + "the profiles and curves must be in one sketch": "הפרופילים והעקומות חייבים להיות בסקיצה אחת", + "the reference face must be on the edges' body": "פאת הייחוס חייבת להיות על הגוף של המקצועות", + "the scale must be above 0": "קנה המידה חייב להיות גדול מ־0", + "the section's profiles must be in one sketch": "הפרופילים של החתך חייבים להיות בסקיצה אחת", + "the two origins are on the same component": "שתי הראשיות נמצאות על אותו רכיב", + "trim by sketch curves, or by one plane or face": "יש לגזום באמצעות עקומות סקיצה, או באמצעות מישור אחד או פאה אחת", + "use a positive nominal diameter and a pitch smaller than it": "יש להשתמש בקוטר נומינלי חיובי ובפסיעה קטנה ממנו", + "values must be finite numbers": "הערכים חייבים להיות מספרים סופיים", + "values must be numbers or expressions": "הערכים חייבים להיות מספרים או ביטויים" + }, + "it": { + "Factor must be a positive number": "Il fattore deve essere un numero positivo", + "Library response is missing": "Manca la risposta della libreria", + "Part length must be greater than zero and at most 2000 mm": "La lunghezza del pezzo deve essere maggiore di zero e al massimo 2000 mm", + "Pick a part size": "Scegli una dimensione del pezzo", + "Quantity must be at least 2": "La quantità deve essere almeno 2", + "Select points of the sketch being edited": "Seleziona punti dello schizzo in modifica", + "Select the centre the pattern turns around first": "Seleziona prima il centro attorno a cui ruota la serie", + "Select the curves to offset first": "Seleziona prima le curve per l'offset", + "Select the mirror line": "Seleziona la linea di simmetria", + "Select the sketch curves or points to mirror first": "Seleziona prima le curve o i punti dello schizzo da specchiare", + "Select the sketch curves or points to move first": "Seleziona prima le curve o i punti dello schizzo da spostare", + "Select the sketch curves or points to pattern first": "Seleziona prima le curve o i punti dello schizzo per la serie", + "Select the sketch curves or points to scale first": "Seleziona prima le curve o i punti dello schizzo da scalare", + "Select the sketch curves or points to transform first": "Seleziona prima le curve o i punti dello schizzo da trasformare", + "Spacing 2 must be a non-zero number": "La spaziatura 2 deve essere un numero diverso da zero", + "Spacing must be a non-zero number": "La spaziatura deve essere un numero diverso da zero", + "The design changed. Reopen Change Part Size for the component.": "Il progetto è cambiato. Riapri Cambia dimensione del pezzo per il componente.", + "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "La direzione deve essere un asse o una curva retta dello schizzo che giace sul piano dello schizzo", + "The mirror line cannot also be mirrored": "La linea di simmetria non può essere specchiata a sua volta", + "The mirror line must be a straight curve of this sketch, not an origin axis": "La linea di simmetria deve essere una curva retta di questo schizzo, non un asse dell'origine", + "Type a distance or an angle to move by": "Scrivi una distanza o un angolo di spostamento", + "`joint` must be an id or a name": "`joint` deve essere un id o un nome", + "`params` must be an object": "`params` deve essere un oggetto", + "`values` must be a list": "`values` deve essere un elenco", + "a chamfer needs a corner of exactly two lines": "uno smusso richiede un angolo di esattamente due linee", + "a file operation is in progress": "è in corso un'operazione sul file", + "a picked curve is no longer in a sketch": "una curva scelta non è più in uno schizzo", + "a picked curve's sketch has not been solved": "lo schizzo di una curva scelta non è stato risolto", + "a picked edge has no points": "uno spigolo scelto non ha punti", + "a picked edge is gone": "uno spigolo scelto non esiste più", + "a picked edge's body is gone": "il corpo di uno spigolo scelto non esiste più", + "choose a profile": "scegli un profilo", + "choose the cam's and the follower's joints": "scegli i giunti della camma e del seguace", + "choose the joints to couple": "scegli i giunti da accoppiare", + "each rail's curves must be in one sketch": "le curve di ogni guida devono stare in un solo schizzo", + "feature computation ended without a result": "il calcolo dell'operazione si è concluso senza risultato", + "not a move": "non è uno spostamento", + "not a number": "non è un numero", + "open a sketch first": "apri prima uno schizzo", + "pick a body or some of its faces": "scegli un corpo o alcune delle sue facce", + "pick a planar face": "scegli una faccia piana", + "pick a plane or a face as the tool": "scegli un piano o una faccia come strumento", + "pick a size": "scegli una dimensione", + "pick edges of a body": "scegli spigoli di un corpo", + "pick edges of one body": "scegli spigoli di un solo corpo", + "pick edges of the holes to remove": "scegli gli spigoli dei fori da rimuovere", + "pick faces of one body": "scegli facce di un solo corpo", + "pick faces to offset": "scegli le facce di cui creare l'offset", + "pick lines of one sketch": "scegli linee di un solo schizzo", + "pick one plane or face as the tool, or sketch curves": "scegli un piano o una faccia come strumento, oppure curve dello schizzo", + "pick sections in two or more sketches": "scegli sezioni in due o più schizzi", + "pick sketch curves or edges": "scegli curve dello schizzo o spigoli", + "pick the face to untrim": "scegli la faccia di cui annullare il ritaglio", + "pick what to keep": "scegli cosa tenere", + "pick what to keep of the other surface": "scegli cosa tenere dell'altra superficie", + "select a direction (an axis, a sketch line or a straight edge) first": "seleziona prima una direzione (un asse, una linea dello schizzo o uno spigolo retto)", + "select a direction (an axis, a sketch line or a straight edge) for the profile to follow": "seleziona una direzione (un asse, una linea dello schizzo o uno spigolo retto) che il profilo deve seguire", + "select a profile, edges or sketch lines first": "seleziona prima un profilo, spigoli o linee dello schizzo", + "select an axis": "seleziona un asse", + "select an axis, a straight or circular edge, or a cylinder, cone or torus face first": "seleziona prima un asse, uno spigolo retto o circolare, oppure una faccia cilindrica, conica o toroidale", + "select bodies first": "seleziona prima dei corpi", + "select corner points, or the two lines of one corner": "seleziona punti d'angolo, oppure le due linee di un angolo", + "select one corner point, or the two lines of one corner": "seleziona un punto d'angolo, oppure le due linee di un angolo", + "select sheet edges first": "seleziona prima gli spigoli della lamiera", + "select the bend line (a sketch line) first": "seleziona prima la linea di piegatura (una linea dello schizzo)", + "select the cam's profile (a sketch profile or the cam's edges)": "seleziona il profilo della camma (un profilo dello schizzo o gli spigoli della camma)", + "select the corner to cut first": "seleziona prima l'angolo da tagliare", + "select the corners to round first": "seleziona prima gli angoli da arrotondare", + "select the fixed face first (a plate's large face)": "seleziona prima la faccia fissa (la faccia grande di una piastra)", + "select the frame sketch's lines first": "seleziona prima le linee dello schizzo del telaio", + "select the path (sketch lines across the edge)": "seleziona il percorso (linee dello schizzo lungo lo spigolo)", + "select the rim face first": "seleziona prima la faccia del bordo", + "select the sheet edge first": "seleziona prima lo spigolo della lamiera", + "select two components": "seleziona due componenti", + "sketch is missing": "manca lo schizzo", + "the angle must be a number": "l'angolo deve essere un numero", + "the curves must be in one sketch": "le curve devono stare in un solo schizzo", + "the direction must be an axis, a sketch line or a straight edge": "la direzione deve essere un asse, una linea dello schizzo o uno spigolo retto", + "the duration must be a number of seconds, 0.001 or more": "la durata deve essere un numero di secondi, 0.001 o più", + "the line's sketch is gone": "lo schizzo della linea non esiste più", + "the lines must be in one sketch": "le linee devono stare in un solo schizzo", + "the lines must be in one sketch, not the section's": "le linee devono stare in un solo schizzo, non in quello della sezione", + "the parts library is empty": "la libreria dei pezzi è vuota", + "the path curves must be in one other sketch": "le curve del percorso devono stare in un unico altro schizzo", + "the path's sketch is gone": "lo schizzo del percorso non esiste più", + "the position must be a number": "la posizione deve essere un numero", + "the preview failed": "l'anteprima non è riuscita", + "the profiles and curves must be in one sketch": "i profili e le curve devono stare in un solo schizzo", + "the reference face must be on the edges' body": "la faccia di riferimento deve appartenere al corpo degli spigoli", + "the scale must be above 0": "la scala deve essere maggiore di 0", + "the section's profiles must be in one sketch": "i profili della sezione devono stare in un solo schizzo", + "the two origins are on the same component": "le due origini sono sullo stesso componente", + "trim by sketch curves, or by one plane or face": "ritaglia con curve dello schizzo, oppure con un piano o una faccia", + "use a positive nominal diameter and a pitch smaller than it": "usa un diametro nominale positivo e un passo minore di esso", + "values must be finite numbers": "i valori devono essere numeri finiti", + "values must be numbers or expressions": "i valori devono essere numeri o espressioni" + }, + "ja": { + "Factor must be a positive number": "係数は正の数にしてください", + "Library response is missing": "ライブラリからの応答がありません", + "Part length must be greater than zero and at most 2000 mm": "パーツの長さは0より大きく、2000 mm以下にしてください", + "Pick a part size": "パーツのサイズを選択してください", + "Quantity must be at least 2": "数量は2以上にしてください", + "Select points of the sketch being edited": "編集中のスケッチの点を選択してください", + "Select the centre the pattern turns around first": "パターンの回転中心を先に選択してください", + "Select the curves to offset first": "オフセットする曲線を先に選択してください", + "Select the mirror line": "ミラー線を選択してください", + "Select the sketch curves or points to mirror first": "ミラーするスケッチの曲線または点を先に選択してください", + "Select the sketch curves or points to move first": "移動するスケッチの曲線または点を先に選択してください", + "Select the sketch curves or points to pattern first": "パターンにするスケッチの曲線または点を先に選択してください", + "Select the sketch curves or points to scale first": "尺度を変更するスケッチの曲線または点を先に選択してください", + "Select the sketch curves or points to transform first": "変換するスケッチの曲線または点を先に選択してください", + "Spacing 2 must be a non-zero number": "間隔 2は0以外の数値にしてください", + "Spacing must be a non-zero number": "間隔は0以外の数値にしてください", + "The design changed. Reopen Change Part Size for the component.": "デザインが変更されました。コンポーネントの「パーツ サイズを変更」を開き直してください。", + "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "方向は、軸、またはスケッチ平面上にある直線のスケッチ曲線にしてください", + "The mirror line cannot also be mirrored": "ミラー線自体をミラーすることはできません", + "The mirror line must be a straight curve of this sketch, not an origin axis": "ミラー線は、原点の軸ではなく、このスケッチの直線にしてください", + "Type a distance or an angle to move by": "移動する距離または角度を入力してください", + "`joint` must be an id or a name": "`joint` にはIDまたは名前を指定してください", + "`params` must be an object": "`params` はオブジェクトにしてください", + "`values` must be a list": "`values` はリストにしてください", + "a chamfer needs a corner of exactly two lines": "面取りには、ちょうど2本の線からなるコーナーが必要です", + "a file operation is in progress": "ファイル操作の実行中です", + "a picked curve is no longer in a sketch": "選択した曲線がスケッチ内にありません", + "a picked curve's sketch has not been solved": "選択した曲線のスケッチがまだ解かれていません", + "a picked edge has no points": "選択したエッジに点がありません", + "a picked edge is gone": "選択したエッジが存在しなくなりました", + "a picked edge's body is gone": "選択したエッジのボディが存在しなくなりました", + "choose a profile": "プロファイルを選択してください", + "choose the cam's and the follower's joints": "カムと従動節のジョイントを選択してください", + "choose the joints to couple": "連結するジョイントを選択してください", + "each rail's curves must be in one sketch": "各レールの曲線は1つのスケッチ内にある必要があります", + "feature computation ended without a result": "フィーチャーの計算が結果なしで終了しました", + "not a move": "移動ではありません", + "not a number": "数値ではありません", + "open a sketch first": "先にスケッチを開いてください", + "pick a body or some of its faces": "ボディ、またはそのボディの面を選択してください", + "pick a planar face": "平面状の面を選択してください", + "pick a plane or a face as the tool": "ツールとして平面または面を選択してください", + "pick a size": "サイズを選択してください", + "pick edges of a body": "ボディのエッジを選択してください", + "pick edges of one body": "1つのボディのエッジを選択してください", + "pick edges of the holes to remove": "削除する穴のエッジを選択してください", + "pick faces of one body": "1つのボディの面を選択してください", + "pick faces to offset": "オフセットする面を選択してください", + "pick lines of one sketch": "1つのスケッチの線を選択してください", + "pick one plane or face as the tool, or sketch curves": "ツールとして平面または面を1つ、またはスケッチ曲線を選択してください", + "pick sections in two or more sketches": "2つ以上のスケッチにあるセクションを選択してください", + "pick sketch curves or edges": "スケッチ曲線またはエッジを選択してください", + "pick the face to untrim": "トリム解除する面を選択してください", + "pick what to keep": "残す部分を選択してください", + "pick what to keep of the other surface": "相手のサーフェスで残す部分を選択してください", + "select a direction (an axis, a sketch line or a straight edge) first": "方向(軸、スケッチ線、または直線のエッジ)を先に選択してください", + "select a direction (an axis, a sketch line or a straight edge) for the profile to follow": "プロファイルが沿う方向(軸、スケッチ線、または直線のエッジ)を選択してください", + "select a profile, edges or sketch lines first": "プロファイル、エッジ、またはスケッチ線を先に選択してください", + "select an axis": "軸を選択してください", + "select an axis, a straight or circular edge, or a cylinder, cone or torus face first": "軸、直線または円のエッジ、あるいは円柱・円錐・トーラスの面を先に選択してください", + "select bodies first": "ボディを先に選択してください", + "select corner points, or the two lines of one corner": "コーナーの点、または1つのコーナーの2本の線を選択してください", + "select one corner point, or the two lines of one corner": "コーナーの点を1つ、または1つのコーナーの2本の線を選択してください", + "select sheet edges first": "板金のエッジを先に選択してください", + "select the bend line (a sketch line) first": "曲げ線(スケッチ線)を先に選択してください", + "select the cam's profile (a sketch profile or the cam's edges)": "カムのプロファイル(スケッチのプロファイル、またはカムのエッジ)を選択してください", + "select the corner to cut first": "切り落とすコーナーを先に選択してください", + "select the corners to round first": "丸めるコーナーを先に選択してください", + "select the fixed face first (a plate's large face)": "固定面(プレートの大きな面)を先に選択してください", + "select the frame sketch's lines first": "フレームスケッチの線を先に選択してください", + "select the path (sketch lines across the edge)": "パス(エッジをまたぐスケッチ線)を選択してください", + "select the rim face first": "リム面を先に選択してください", + "select the sheet edge first": "板金のエッジを先に選択してください", + "select two components": "2つのコンポーネントを選択してください", + "sketch is missing": "スケッチが見つかりません", + "the angle must be a number": "角度は数値にしてください", + "the curves must be in one sketch": "曲線は1つのスケッチ内にある必要があります", + "the direction must be an axis, a sketch line or a straight edge": "方向は、軸、スケッチ線、または直線のエッジにしてください", + "the duration must be a number of seconds, 0.001 or more": "時間は0.001秒以上の秒数で指定してください", + "the line's sketch is gone": "線のスケッチが存在しなくなりました", + "the lines must be in one sketch": "線は1つのスケッチ内にある必要があります", + "the lines must be in one sketch, not the section's": "線は、セクションのスケッチではなく、1つのスケッチ内にある必要があります", + "the parts library is empty": "パーツライブラリが空です", + "the path curves must be in one other sketch": "パスの曲線は、別の1つのスケッチ内にある必要があります", + "the path's sketch is gone": "パスのスケッチが存在しなくなりました", + "the position must be a number": "位置は数値にしてください", + "the preview failed": "プレビューに失敗しました", + "the profiles and curves must be in one sketch": "プロファイルと曲線は1つのスケッチ内にある必要があります", + "the reference face must be on the edges' body": "参照面はエッジのボディ上にある必要があります", + "the scale must be above 0": "尺度は0より大きくしてください", + "the section's profiles must be in one sketch": "セクションのプロファイルは1つのスケッチ内にある必要があります", + "the two origins are on the same component": "2つの原点が同じコンポーネント上にあります", + "trim by sketch curves, or by one plane or face": "スケッチ曲線、または1つの平面か面でトリムしてください", + "use a positive nominal diameter and a pitch smaller than it": "正の呼び径と、それより小さいピッチを使用してください", + "values must be finite numbers": "値は有限の数値にしてください", + "values must be numbers or expressions": "値は数値または式にしてください" + }, + "ko": { + "Factor must be a positive number": "계수는 양수여야 합니다", + "Library response is missing": "라이브러리 응답이 없습니다", + "Part length must be greater than zero and at most 2000 mm": "부품 길이는 0보다 크고 2000 mm 이하여야 합니다", + "Pick a part size": "부품 크기를 선택하세요", + "Quantity must be at least 2": "수량은 2 이상이어야 합니다", + "Select points of the sketch being edited": "편집 중인 스케치의 점을 선택하세요", + "Select the centre the pattern turns around first": "패턴이 회전할 중심을 먼저 선택하세요", + "Select the curves to offset first": "오프셋할 곡선을 먼저 선택하세요", + "Select the mirror line": "대칭선을 선택하세요", + "Select the sketch curves or points to mirror first": "대칭 복사할 스케치 곡선 또는 점을 먼저 선택하세요", + "Select the sketch curves or points to move first": "이동할 스케치 곡선 또는 점을 먼저 선택하세요", + "Select the sketch curves or points to pattern first": "패턴으로 만들 스케치 곡선 또는 점을 먼저 선택하세요", + "Select the sketch curves or points to scale first": "축척을 바꿀 스케치 곡선 또는 점을 먼저 선택하세요", + "Select the sketch curves or points to transform first": "변환할 스케치 곡선 또는 점을 먼저 선택하세요", + "Spacing 2 must be a non-zero number": "간격 2는 0이 아닌 숫자여야 합니다", + "Spacing must be a non-zero number": "간격은 0이 아닌 숫자여야 합니다", + "The design changed. Reopen Change Part Size for the component.": "설계가 변경되었습니다. 구성요소의 '부품 크기 변경'을 다시 여세요.", + "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "방향은 축이거나 스케치 평면 위에 있는 직선 스케치 곡선이어야 합니다", + "The mirror line cannot also be mirrored": "대칭선 자체를 대칭 복사할 수 없습니다", + "The mirror line must be a straight curve of this sketch, not an origin axis": "대칭선은 원점 축이 아니라 이 스케치의 직선이어야 합니다", + "Type a distance or an angle to move by": "이동할 거리 또는 각도를 입력하세요", + "`joint` must be an id or a name": "`joint`는 ID 또는 이름이어야 합니다", + "`params` must be an object": "`params`는 객체여야 합니다", + "`values` must be a list": "`values`는 목록이어야 합니다", + "a chamfer needs a corner of exactly two lines": "모따기에는 정확히 두 선으로 이루어진 코너가 필요합니다", + "a file operation is in progress": "파일 작업이 진행 중입니다", + "a picked curve is no longer in a sketch": "선택한 곡선이 더 이상 스케치에 없습니다", + "a picked curve's sketch has not been solved": "선택한 곡선의 스케치가 아직 풀리지 않았습니다", + "a picked edge has no points": "선택한 모서리에 점이 없습니다", + "a picked edge is gone": "선택한 모서리가 더 이상 없습니다", + "a picked edge's body is gone": "선택한 모서리의 바디가 더 이상 없습니다", + "choose a profile": "프로파일을 선택하세요", + "choose the cam's and the follower's joints": "캠과 종동절의 관절을 선택하세요", + "choose the joints to couple": "연결할 관절을 선택하세요", + "each rail's curves must be in one sketch": "각 레일의 곡선은 하나의 스케치 안에 있어야 합니다", + "feature computation ended without a result": "특성 계산이 결과 없이 끝났습니다", + "not a move": "이동이 아닙니다", + "not a number": "숫자가 아닙니다", + "open a sketch first": "먼저 스케치를 여세요", + "pick a body or some of its faces": "바디 또는 바디의 면을 선택하세요", + "pick a planar face": "평평한 면을 선택하세요", + "pick a plane or a face as the tool": "도구로 사용할 평면 또는 면을 선택하세요", + "pick a size": "크기를 선택하세요", + "pick edges of a body": "바디의 모서리를 선택하세요", + "pick edges of one body": "하나의 바디의 모서리를 선택하세요", + "pick edges of the holes to remove": "제거할 구멍의 모서리를 선택하세요", + "pick faces of one body": "하나의 바디의 면을 선택하세요", + "pick faces to offset": "오프셋할 면을 선택하세요", + "pick lines of one sketch": "하나의 스케치의 선을 선택하세요", + "pick one plane or face as the tool, or sketch curves": "도구로 사용할 평면 또는 면 하나, 또는 스케치 곡선을 선택하세요", + "pick sections in two or more sketches": "둘 이상의 스케치에 있는 단면을 선택하세요", + "pick sketch curves or edges": "스케치 곡선 또는 모서리를 선택하세요", + "pick the face to untrim": "트림을 해제할 면을 선택하세요", + "pick what to keep": "남길 부분을 선택하세요", + "pick what to keep of the other surface": "다른 곡면에서 남길 부분을 선택하세요", + "select a direction (an axis, a sketch line or a straight edge) first": "방향(축, 스케치 선 또는 직선 모서리)을 먼저 선택하세요", + "select a direction (an axis, a sketch line or a straight edge) for the profile to follow": "프로파일이 따라갈 방향(축, 스케치 선 또는 직선 모서리)을 선택하세요", + "select a profile, edges or sketch lines first": "프로파일, 모서리 또는 스케치 선을 먼저 선택하세요", + "select an axis": "축을 선택하세요", + "select an axis, a straight or circular edge, or a cylinder, cone or torus face first": "축, 직선 또는 원형 모서리, 또는 원기둥·원뿔·토러스 면을 먼저 선택하세요", + "select bodies first": "바디를 먼저 선택하세요", + "select corner points, or the two lines of one corner": "코너 점, 또는 하나의 코너를 이루는 두 선을 선택하세요", + "select one corner point, or the two lines of one corner": "코너 점 하나, 또는 하나의 코너를 이루는 두 선을 선택하세요", + "select sheet edges first": "판금 모서리를 먼저 선택하세요", + "select the bend line (a sketch line) first": "벤딩 선(스케치 선)을 먼저 선택하세요", + "select the cam's profile (a sketch profile or the cam's edges)": "캠의 프로파일(스케치 프로파일 또는 캠의 모서리)을 선택하세요", + "select the corner to cut first": "잘라낼 코너를 먼저 선택하세요", + "select the corners to round first": "둥글게 만들 코너를 먼저 선택하세요", + "select the fixed face first (a plate's large face)": "고정 면(플레이트의 큰 면)을 먼저 선택하세요", + "select the frame sketch's lines first": "프레임 스케치의 선을 먼저 선택하세요", + "select the path (sketch lines across the edge)": "경로(모서리를 가로지르는 스케치 선)를 선택하세요", + "select the rim face first": "테두리 면을 먼저 선택하세요", + "select the sheet edge first": "판금 모서리를 먼저 선택하세요", + "select two components": "구성요소 두 개를 선택하세요", + "sketch is missing": "스케치가 없습니다", + "the angle must be a number": "각도는 숫자여야 합니다", + "the curves must be in one sketch": "곡선은 하나의 스케치 안에 있어야 합니다", + "the direction must be an axis, a sketch line or a straight edge": "방향은 축, 스케치 선 또는 직선 모서리여야 합니다", + "the duration must be a number of seconds, 0.001 or more": "지속 시간은 0.001초 이상의 초 단위 숫자여야 합니다", + "the line's sketch is gone": "선이 속한 스케치가 더 이상 없습니다", + "the lines must be in one sketch": "선은 하나의 스케치 안에 있어야 합니다", + "the lines must be in one sketch, not the section's": "선은 단면의 스케치가 아닌 하나의 스케치 안에 있어야 합니다", + "the parts library is empty": "부품 라이브러리가 비어 있습니다", + "the path curves must be in one other sketch": "경로 곡선은 다른 하나의 스케치 안에 있어야 합니다", + "the path's sketch is gone": "경로의 스케치가 더 이상 없습니다", + "the position must be a number": "위치는 숫자여야 합니다", + "the preview failed": "미리보기에 실패했습니다", + "the profiles and curves must be in one sketch": "프로파일과 곡선은 하나의 스케치 안에 있어야 합니다", + "the reference face must be on the edges' body": "참조 면은 모서리가 속한 바디에 있어야 합니다", + "the scale must be above 0": "축척은 0보다 커야 합니다", + "the section's profiles must be in one sketch": "단면의 프로파일은 하나의 스케치 안에 있어야 합니다", + "the two origins are on the same component": "두 원점이 같은 구성요소에 있습니다", + "trim by sketch curves, or by one plane or face": "스케치 곡선 또는 평면이나 면 하나로 트림하세요", + "use a positive nominal diameter and a pitch smaller than it": "양수인 호칭 지름과 그보다 작은 피치를 사용하세요", + "values must be finite numbers": "값은 유한한 숫자여야 합니다", + "values must be numbers or expressions": "값은 숫자 또는 식이어야 합니다" + }, + "vi": { + "Factor must be a positive number": "Hệ số phải là một số dương", + "Library response is missing": "Thiếu phản hồi từ thư viện", + "Part length must be greater than zero and at most 2000 mm": "Chiều dài chi tiết phải lớn hơn 0 và tối đa 2000 mm", + "Pick a part size": "Chọn một kích thước chi tiết", + "Quantity must be at least 2": "Số lượng phải từ 2 trở lên", + "Select points of the sketch being edited": "Chọn các điểm của phác thảo đang chỉnh sửa", + "Select the centre the pattern turns around first": "Hãy chọn tâm mà mảng xoay quanh trước", + "Select the curves to offset first": "Hãy chọn các đường cong cần offset trước", + "Select the mirror line": "Chọn đường đối xứng", + "Select the sketch curves or points to mirror first": "Hãy chọn các đường cong hoặc điểm phác thảo cần đối xứng trước", + "Select the sketch curves or points to move first": "Hãy chọn các đường cong hoặc điểm phác thảo cần di chuyển trước", + "Select the sketch curves or points to pattern first": "Hãy chọn các đường cong hoặc điểm phác thảo cần tạo mảng trước", + "Select the sketch curves or points to scale first": "Hãy chọn các đường cong hoặc điểm phác thảo cần thay đổi tỷ lệ trước", + "Select the sketch curves or points to transform first": "Hãy chọn các đường cong hoặc điểm phác thảo cần biến đổi trước", + "Spacing 2 must be a non-zero number": "Khoảng cách 2 phải là một số khác 0", + "Spacing must be a non-zero number": "Khoảng cách phải là một số khác 0", + "The design changed. Reopen Change Part Size for the component.": "Thiết kế đã thay đổi. Hãy mở lại Change Part Size cho thành phần này.", + "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "Hướng phải là một trục hoặc một đường cong phác thảo thẳng nằm trong mặt phẳng phác thảo", + "The mirror line cannot also be mirrored": "Đường đối xứng không thể đồng thời được lấy đối xứng", + "The mirror line must be a straight curve of this sketch, not an origin axis": "Đường đối xứng phải là một đường cong thẳng của phác thảo này, không phải trục gốc", + "Type a distance or an angle to move by": "Nhập khoảng cách hoặc góc để di chuyển", + "`joint` must be an id or a name": "`joint` phải là một id hoặc một tên", + "`params` must be an object": "`params` phải là một đối tượng", + "`values` must be a list": "`values` phải là một danh sách", + "a chamfer needs a corner of exactly two lines": "vát cạnh cần một góc gồm đúng hai đường thẳng", + "a file operation is in progress": "một thao tác tệp đang được thực hiện", + "a picked curve is no longer in a sketch": "một đường cong đã chọn không còn nằm trong phác thảo nào", + "a picked curve's sketch has not been solved": "phác thảo của một đường cong đã chọn chưa được giải", + "a picked edge has no points": "một cạnh đã chọn không có điểm nào", + "a picked edge is gone": "một cạnh đã chọn không còn nữa", + "a picked edge's body is gone": "thân của một cạnh đã chọn không còn nữa", + "choose a profile": "chọn một biên dạng", + "choose the cam's and the follower's joints": "chọn khớp của cam và khớp của cần đẩy", + "choose the joints to couple": "chọn các khớp cần ghép nối", + "each rail's curves must be in one sketch": "các đường cong của mỗi đường dẫn hướng phải nằm trong cùng một phác thảo", + "feature computation ended without a result": "việc tính toán đặc trưng kết thúc mà không có kết quả", + "not a move": "không phải một phép di chuyển", + "not a number": "không phải là số", + "open a sketch first": "hãy mở một phác thảo trước", + "pick a body or some of its faces": "chọn một thân hoặc một số mặt của thân", + "pick a planar face": "chọn một mặt phẳng", + "pick a plane or a face as the tool": "chọn một mặt phẳng hoặc một mặt làm dụng cụ", + "pick a size": "chọn một kích thước", + "pick edges of a body": "chọn các cạnh của một thân", + "pick edges of one body": "chọn các cạnh của cùng một thân", + "pick edges of the holes to remove": "chọn các cạnh của những lỗ cần loại bỏ", + "pick faces of one body": "chọn các mặt của cùng một thân", + "pick faces to offset": "chọn các mặt cần offset", + "pick lines of one sketch": "chọn các đường thẳng của cùng một phác thảo", + "pick one plane or face as the tool, or sketch curves": "chọn một mặt phẳng hoặc một mặt làm dụng cụ, hoặc chọn các đường cong phác thảo", + "pick sections in two or more sketches": "chọn các mặt cắt trong hai phác thảo trở lên", + "pick sketch curves or edges": "chọn các đường cong phác thảo hoặc các cạnh", + "pick the face to untrim": "chọn mặt cần hủy cắt tỉa", + "pick what to keep": "chọn phần cần giữ lại", + "pick what to keep of the other surface": "chọn phần cần giữ lại của bề mặt còn lại", + "select a direction (an axis, a sketch line or a straight edge) first": "hãy chọn một hướng (một trục, một đường thẳng phác thảo hoặc một cạnh thẳng) trước", + "select a direction (an axis, a sketch line or a straight edge) for the profile to follow": "chọn một hướng (một trục, một đường thẳng phác thảo hoặc một cạnh thẳng) để biên dạng đi theo", + "select a profile, edges or sketch lines first": "hãy chọn một biên dạng, các cạnh hoặc các đường thẳng phác thảo trước", + "select an axis": "chọn một trục", + "select an axis, a straight or circular edge, or a cylinder, cone or torus face first": "hãy chọn một trục, một cạnh thẳng hoặc cạnh tròn, hoặc một mặt trụ, mặt nón hay mặt xuyến trước", + "select bodies first": "hãy chọn các thân trước", + "select corner points, or the two lines of one corner": "chọn các điểm góc, hoặc hai đường thẳng của một góc", + "select one corner point, or the two lines of one corner": "chọn một điểm góc, hoặc hai đường thẳng của một góc", + "select sheet edges first": "hãy chọn các cạnh của tấm trước", + "select the bend line (a sketch line) first": "hãy chọn đường gập (một đường thẳng phác thảo) trước", + "select the cam's profile (a sketch profile or the cam's edges)": "chọn biên dạng của cam (một biên dạng phác thảo hoặc các cạnh của cam)", + "select the corner to cut first": "hãy chọn góc cần cắt trước", + "select the corners to round first": "hãy chọn các góc cần bo tròn trước", + "select the fixed face first (a plate's large face)": "hãy chọn mặt cố định trước (mặt lớn của một tấm)", + "select the frame sketch's lines first": "hãy chọn các đường thẳng của phác thảo khung trước", + "select the path (sketch lines across the edge)": "chọn đường dẫn (các đường thẳng phác thảo dọc qua cạnh)", + "select the rim face first": "hãy chọn mặt viền trước", + "select the sheet edge first": "hãy chọn cạnh của tấm trước", + "select two components": "chọn hai thành phần", + "sketch is missing": "thiếu phác thảo", + "the angle must be a number": "góc phải là một số", + "the curves must be in one sketch": "các đường cong phải nằm trong cùng một phác thảo", + "the direction must be an axis, a sketch line or a straight edge": "hướng phải là một trục, một đường thẳng phác thảo hoặc một cạnh thẳng", + "the duration must be a number of seconds, 0.001 or more": "thời lượng phải là một số giây, từ 0,001 trở lên", + "the line's sketch is gone": "phác thảo của đường thẳng không còn nữa", + "the lines must be in one sketch": "các đường thẳng phải nằm trong cùng một phác thảo", + "the lines must be in one sketch, not the section's": "các đường thẳng phải nằm trong cùng một phác thảo, không phải phác thảo của mặt cắt", + "the parts library is empty": "thư viện chi tiết đang trống", + "the path curves must be in one other sketch": "các đường cong của đường dẫn phải nằm trong cùng một phác thảo khác", + "the path's sketch is gone": "phác thảo của đường dẫn không còn nữa", + "the position must be a number": "vị trí phải là một số", + "the preview failed": "xem trước không thành công", + "the profiles and curves must be in one sketch": "các biên dạng và đường cong phải nằm trong cùng một phác thảo", + "the reference face must be on the edges' body": "mặt tham chiếu phải thuộc thân của các cạnh", + "the scale must be above 0": "tỷ lệ phải lớn hơn 0", + "the section's profiles must be in one sketch": "các biên dạng của mặt cắt phải nằm trong cùng một phác thảo", + "the two origins are on the same component": "hai gốc tọa độ nằm trên cùng một thành phần", + "trim by sketch curves, or by one plane or face": "cắt tỉa bằng các đường cong phác thảo, hoặc bằng một mặt phẳng hay một mặt", + "use a positive nominal diameter and a pitch smaller than it": "dùng đường kính danh nghĩa dương và bước ren nhỏ hơn đường kính đó", + "values must be finite numbers": "các giá trị phải là số hữu hạn", + "values must be numbers or expressions": "các giá trị phải là số hoặc biểu thức" + }, + "zh": { + "Factor must be a positive number": "系数必须是正数", + "Library response is missing": "缺少零件库的响应", + "Part length must be greater than zero and at most 2000 mm": "零件长度必须大于零且不超过 2000 mm", + "Pick a part size": "请选择零件尺寸", + "Quantity must be at least 2": "数量至少为 2", + "Select points of the sketch being edited": "请选择正在编辑的草图中的点", + "Select the centre the pattern turns around first": "请先选择阵列旋转所绕的中心", + "Select the curves to offset first": "请先选择要偏移的曲线", + "Select the mirror line": "请选择镜像线", + "Select the sketch curves or points to mirror first": "请先选择要镜像的草图曲线或点", + "Select the sketch curves or points to move first": "请先选择要移动的草图曲线或点", + "Select the sketch curves or points to pattern first": "请先选择要阵列的草图曲线或点", + "Select the sketch curves or points to scale first": "请先选择要缩放的草图曲线或点", + "Select the sketch curves or points to transform first": "请先选择要变换的草图曲线或点", + "Spacing 2 must be a non-zero number": "间距 2 必须是非零数字", + "Spacing must be a non-zero number": "间距必须是非零数字", + "The design changed. Reopen Change Part Size for the component.": "设计已更改。请为该组件重新打开“更改零件尺寸”。", + "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "方向必须是轴,或位于草图平面内的直线草图曲线", + "The mirror line cannot also be mirrored": "镜像线本身不能再被镜像", + "The mirror line must be a straight curve of this sketch, not an origin axis": "镜像线必须是此草图中的直线曲线,不能是原点轴", + "Type a distance or an angle to move by": "请输入要移动的距离或角度", + "`joint` must be an id or a name": "“joint”必须是编号或名称", + "`params` must be an object": "“params”必须是对象", + "`values` must be a list": "“values”必须是列表", + "a chamfer needs a corner of exactly two lines": "倒角需要恰好由两条直线构成的角", + "a file operation is in progress": "正在进行文件操作", + "a picked curve is no longer in a sketch": "所选曲线已不在任何草图中", + "a picked curve's sketch has not been solved": "所选曲线所在的草图尚未求解", + "a picked edge has no points": "所选边没有点", + "a picked edge is gone": "所选边已不存在", + "a picked edge's body is gone": "所选边所属的实体已不存在", + "choose a profile": "请选择轮廓", + "choose the cam's and the follower's joints": "请选择凸轮和从动件的接头", + "choose the joints to couple": "请选择要耦合的接头", + "each rail's curves must be in one sketch": "每条导轨的曲线必须位于同一个草图中", + "feature computation ended without a result": "特征计算结束时没有返回结果", + "not a move": "不是移动", + "not a number": "不是数字", + "open a sketch first": "请先打开一个草图", + "pick a body or some of its faces": "请选择一个实体或它的若干个面", + "pick a planar face": "请选择一个平面", + "pick a plane or a face as the tool": "请选择一个平面或一个面作为工具", + "pick a size": "请选择尺寸", + "pick edges of a body": "请选择实体的边", + "pick edges of one body": "请选择同一个实体的边", + "pick edges of the holes to remove": "请选择要移除的孔的边", + "pick faces of one body": "请选择同一个实体的面", + "pick faces to offset": "请选择要偏移的面", + "pick lines of one sketch": "请选择同一个草图的直线", + "pick one plane or face as the tool, or sketch curves": "请选择一个平面或一个面作为工具,或选择草图曲线", + "pick sections in two or more sketches": "请选择位于两个或更多草图中的截面", + "pick sketch curves or edges": "请选择草图曲线或边", + "pick the face to untrim": "请选择要取消修剪的面", + "pick what to keep": "请选择要保留的部分", + "pick what to keep of the other surface": "请选择另一个曲面上要保留的部分", + "select a direction (an axis, a sketch line or a straight edge) first": "请先选择方向(轴、草图直线或直边)", + "select a direction (an axis, a sketch line or a straight edge) for the profile to follow": "请选择轮廓所沿的方向(轴、草图直线或直边)", + "select a profile, edges or sketch lines first": "请先选择轮廓、边或草图直线", + "select an axis": "请选择一个轴", + "select an axis, a straight or circular edge, or a cylinder, cone or torus face first": "请先选择轴、直边或圆边,或圆柱面、圆锥面或圆环面", + "select bodies first": "请先选择实体", + "select corner points, or the two lines of one corner": "请选择角点,或同一个角的两条直线", + "select one corner point, or the two lines of one corner": "请选择一个角点,或同一个角的两条直线", + "select sheet edges first": "请先选择钣金边", + "select the bend line (a sketch line) first": "请先选择折弯线(草图直线)", + "select the cam's profile (a sketch profile or the cam's edges)": "请选择凸轮的轮廓(草图轮廓或凸轮的边)", + "select the corner to cut first": "请先选择要切除的角", + "select the corners to round first": "请先选择要倒圆的角", + "select the fixed face first (a plate's large face)": "请先选择固定面(板的大面)", + "select the frame sketch's lines first": "请先选择框架草图的直线", + "select the path (sketch lines across the edge)": "请选择路径(横跨边的草图直线)", + "select the rim face first": "请先选择边缘面", + "select the sheet edge first": "请先选择钣金边", + "select two components": "请选择两个组件", + "sketch is missing": "草图不存在", + "the angle must be a number": "角度必须是数字", + "the curves must be in one sketch": "曲线必须位于同一个草图中", + "the direction must be an axis, a sketch line or a straight edge": "方向必须是轴、草图直线或直边", + "the duration must be a number of seconds, 0.001 or more": "时长必须是不小于 0.001 的秒数", + "the line's sketch is gone": "该直线所在的草图已不存在", + "the lines must be in one sketch": "直线必须位于同一个草图中", + "the lines must be in one sketch, not the section's": "直线必须位于同一个草图中,且不能是截面所在的草图", + "the parts library is empty": "零件库是空的", + "the path curves must be in one other sketch": "路径曲线必须位于同一个另外的草图中", + "the path's sketch is gone": "路径所在的草图已不存在", + "the position must be a number": "位置必须是数字", + "the preview failed": "预览失败", + "the profiles and curves must be in one sketch": "轮廓和曲线必须位于同一个草图中", + "the reference face must be on the edges' body": "参考面必须位于这些边所属的实体上", + "the scale must be above 0": "缩放比例必须大于 0", + "the section's profiles must be in one sketch": "截面的轮廓必须位于同一个草图中", + "the two origins are on the same component": "这两个原点位于同一个组件上", + "trim by sketch curves, or by one plane or face": "请用草图曲线修剪,或用一个平面或面修剪", + "use a positive nominal diameter and a pitch smaller than it": "请使用正的公称直径,且螺距小于公称直径", + "values must be finite numbers": "值必须是有限数字", + "values must be numbers or expressions": "值必须是数字或表达式" + }, + "zh-TW": { + "Factor must be a positive number": "係數必須是正數", + "Library response is missing": "缺少零件庫的回應", + "Part length must be greater than zero and at most 2000 mm": "零件長度必須大於零且不超過 2000 mm", + "Pick a part size": "請選取零件尺寸", + "Quantity must be at least 2": "數量至少為 2", + "Select points of the sketch being edited": "請選取正在編輯的草圖中的點", + "Select the centre the pattern turns around first": "請先選取陣列旋轉所繞的中心", + "Select the curves to offset first": "請先選取要偏移的曲線", + "Select the mirror line": "請選取鏡射線", + "Select the sketch curves or points to mirror first": "請先選取要鏡射的草圖曲線或點", + "Select the sketch curves or points to move first": "請先選取要移動的草圖曲線或點", + "Select the sketch curves or points to pattern first": "請先選取要陣列的草圖曲線或點", + "Select the sketch curves or points to scale first": "請先選取要縮放的草圖曲線或點", + "Select the sketch curves or points to transform first": "請先選取要變換的草圖曲線或點", + "Spacing 2 must be a non-zero number": "間距 2 必須是非零數字", + "Spacing must be a non-zero number": "間距必須是非零數字", + "The design changed. Reopen Change Part Size for the component.": "設計已變更。請為該元件重新開啟「變更零件尺寸」。", + "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "方向必須是軸,或位於草圖平面內的直線草圖曲線", + "The mirror line cannot also be mirrored": "鏡射線本身不能再被鏡射", + "The mirror line must be a straight curve of this sketch, not an origin axis": "鏡射線必須是此草圖中的直線曲線,不能是原點軸", + "Type a distance or an angle to move by": "請輸入要移動的距離或角度", + "`joint` must be an id or a name": "「joint」必須是編號或名稱", + "`params` must be an object": "「params」必須是物件", + "`values` must be a list": "「values」必須是清單", + "a chamfer needs a corner of exactly two lines": "倒角需要恰好由兩條直線構成的角", + "a file operation is in progress": "正在進行檔案操作", + "a picked curve is no longer in a sketch": "所選曲線已不在任何草圖中", + "a picked curve's sketch has not been solved": "所選曲線所在的草圖尚未求解", + "a picked edge has no points": "所選邊沒有點", + "a picked edge is gone": "所選邊已不存在", + "a picked edge's body is gone": "所選邊所屬的實體已不存在", + "choose a profile": "請選取輪廓", + "choose the cam's and the follower's joints": "請選取凸輪和從動件的接頭", + "choose the joints to couple": "請選取要耦合的接頭", + "each rail's curves must be in one sketch": "每條導軌的曲線必須位於同一個草圖中", + "feature computation ended without a result": "特徵計算結束時沒有傳回結果", + "not a move": "不是移動", + "not a number": "不是數字", + "open a sketch first": "請先開啟一個草圖", + "pick a body or some of its faces": "請選取一個實體或它的若干個面", + "pick a planar face": "請選取一個平面", + "pick a plane or a face as the tool": "請選取一個平面或一個面作為工具", + "pick a size": "請選取尺寸", + "pick edges of a body": "請選取實體的邊", + "pick edges of one body": "請選取同一個實體的邊", + "pick edges of the holes to remove": "請選取要移除的孔的邊", + "pick faces of one body": "請選取同一個實體的面", + "pick faces to offset": "請選取要偏移的面", + "pick lines of one sketch": "請選取同一個草圖的直線", + "pick one plane or face as the tool, or sketch curves": "請選取一個平面或一個面作為工具,或選取草圖曲線", + "pick sections in two or more sketches": "請選取位於兩個或更多草圖中的截面", + "pick sketch curves or edges": "請選取草圖曲線或邊", + "pick the face to untrim": "請選取要取消修剪的面", + "pick what to keep": "請選取要保留的部分", + "pick what to keep of the other surface": "請選取另一個曲面上要保留的部分", + "select a direction (an axis, a sketch line or a straight edge) first": "請先選取方向(軸、草圖直線或直邊)", + "select a direction (an axis, a sketch line or a straight edge) for the profile to follow": "請選取輪廓所沿的方向(軸、草圖直線或直邊)", + "select a profile, edges or sketch lines first": "請先選取輪廓、邊或草圖直線", + "select an axis": "請選取一個軸", + "select an axis, a straight or circular edge, or a cylinder, cone or torus face first": "請先選取軸、直邊或圓邊,或圓柱面、圓錐面或圓環面", + "select bodies first": "請先選取實體", + "select corner points, or the two lines of one corner": "請選取角點,或同一個角的兩條直線", + "select one corner point, or the two lines of one corner": "請選取一個角點,或同一個角的兩條直線", + "select sheet edges first": "請先選取鈑金邊", + "select the bend line (a sketch line) first": "請先選取折彎線(草圖直線)", + "select the cam's profile (a sketch profile or the cam's edges)": "請選取凸輪的輪廓(草圖輪廓或凸輪的邊)", + "select the corner to cut first": "請先選取要切除的角", + "select the corners to round first": "請先選取要倒圓的角", + "select the fixed face first (a plate's large face)": "請先選取固定面(板的大面)", + "select the frame sketch's lines first": "請先選取框架草圖的直線", + "select the path (sketch lines across the edge)": "請選取路徑(橫跨邊的草圖直線)", + "select the rim face first": "請先選取邊緣面", + "select the sheet edge first": "請先選取鈑金邊", + "select two components": "請選取兩個元件", + "sketch is missing": "草圖不存在", + "the angle must be a number": "角度必須是數字", + "the curves must be in one sketch": "曲線必須位於同一個草圖中", + "the direction must be an axis, a sketch line or a straight edge": "方向必須是軸、草圖直線或直邊", + "the duration must be a number of seconds, 0.001 or more": "時長必須是不小於 0.001 的秒數", + "the line's sketch is gone": "該直線所在的草圖已不存在", + "the lines must be in one sketch": "直線必須位於同一個草圖中", + "the lines must be in one sketch, not the section's": "直線必須位於同一個草圖中,且不能是截面所在的草圖", + "the parts library is empty": "零件庫是空的", + "the path curves must be in one other sketch": "路徑曲線必須位於同一個另外的草圖中", + "the path's sketch is gone": "路徑所在的草圖已不存在", + "the position must be a number": "位置必須是數字", + "the preview failed": "預覽失敗", + "the profiles and curves must be in one sketch": "輪廓和曲線必須位於同一個草圖中", + "the reference face must be on the edges' body": "參考面必須位於這些邊所屬的實體上", + "the scale must be above 0": "縮放比例必須大於 0", + "the section's profiles must be in one sketch": "截面的輪廓必須位於同一個草圖中", + "the two origins are on the same component": "這兩個原點位於同一個元件上", + "trim by sketch curves, or by one plane or face": "請用草圖曲線修剪,或用一個平面或面修剪", + "use a positive nominal diameter and a pitch smaller than it": "請使用正的公稱直徑,且螺距小於公稱直徑", + "values must be finite numbers": "值必須是有限數字", + "values must be numbers or expressions": "值必須是數字或運算式" + } +} diff --git a/crates/ui-egui/src/dialogs.rs b/crates/ui-egui/src/dialogs.rs index b8931299f..6b1865bb4 100644 --- a/crates/ui-egui/src/dialogs.rs +++ b/crates/ui-egui/src/dialogs.rs @@ -6384,6 +6384,27 @@ mod awaiting_selection_tests { assert_eq!(d.error.as_deref(), Some("select a plane first")); assert!(crate::scenario::handle_at("dialog:create_issue").is_none(), "no Create Issue for a missing pick"); } + + /// A missing-pick hint reads in the user's language: the dialogs return it as English text, + /// and the dialog translates it as it shows it. + #[test] + fn missing_pick_hints_read_in_the_users_language() { + for (command, english) in [ + ("solid.move", "select bodies first"), + ("sheet.flange", "select a profile, edges or sketch lines first"), + ("plastic.lip", "select the rim face first"), + ] { + let mut h = crate::scenario::Harness::new(); + h.step(&serde_json::json!({"start":command})).unwrap(); + h.frames(2); + h.step(&serde_json::json!({"key":"Enter"})).unwrap(); + h.frames(2); + assert_eq!(h.app.dialog.as_ref().and_then(|d| d.error.as_deref()), Some(english), "{command}"); + let _japanese = crate::i18n::scope("ja"); + let shown = super::shown_error(english); + assert!(shown != english && !shown.is_ascii(), "{command} shows {shown:?}"); + } + } } #[cfg(test)]