diff --git a/tests/kernel-cases/surfaces/KNOWN_FAILING b/tests/kernel-cases/surfaces/KNOWN_FAILING index fe07e824c..a514c68f3 100644 --- a/tests/kernel-cases/surfaces/KNOWN_FAILING +++ b/tests/kernel-cases/surfaces/KNOWN_FAILING @@ -3,3 +3,4 @@ # that fails and is not listed fails it, and so does a listed case that passes: a fix removes its # line in the same pull request. # Baseline: rig-cases-surfaces 45f69c0e5 with SMLib 60b1c6a, aarch64 Linux. +cov-fair-single-span-face-has-nothing-free-to-move surface.fair refuses a face of degree 1 one way ("a fairness term does not fit the net's degrees"): kernel/src/fair.rs checks its second-derivative terms against the net's degrees instead of fairing only the direction that has them diff --git a/tests/kernel-cases/surfaces/cov-fair-flat-patch-stays-flat/expected.json b/tests/kernel-cases/surfaces/cov-fair-flat-patch-stays-flat/expected.json new file mode 100644 index 000000000..ec976528f --- /dev/null +++ b/tests/kernel-cases/surfaces/cov-fair-flat-patch-stays-flat/expected.json @@ -0,0 +1,23 @@ +{ + "sources": [], + "what": "fair on a flat boundary patch, with its edges free: a plane has no curvature to even out, so it stays the flat square", + "source": "analytic", + "method": "the Coons patch of the 20 x 20 square lies in z = 0; fairing moves control points to flatten curvature variation, of which a plane has none, and never past the tolerance: area 400, box z 0..0, 4 free edges", + "valid": false, + "body_count": 1, + "faces": 1, + "boundary_edges": 4, + "area_mm2": 400.0, + "bbox": { + "min": [ + 0, + 0, + 0 + ], + "max": [ + 20, + 20, + 0 + ] + } +} diff --git a/tests/kernel-cases/surfaces/cov-fair-flat-patch-stays-flat/recipe.json b/tests/kernel-cases/surfaces/cov-fair-flat-patch-stays-flat/recipe.json new file mode 100644 index 000000000..f65846329 --- /dev/null +++ b/tests/kernel-cases/surfaces/cov-fair-flat-patch-stays-flat/recipe.json @@ -0,0 +1,65 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + }, + "name": "Square" + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 0, + 0 + ], + "p1": [ + 20, + 20 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "surface.boundary", + "params": { + "sketch": "Square", + "curves": [ + "l1", + "l2", + "l3", + "l4" + ], + "body_name": "Patch" + } + }, + { + "command": "surface.fair", + "params": { + "body": "Patch", + "iterations": 20, + "keep_edges": false + } + } + ] +} diff --git a/tests/kernel-cases/surfaces/cov-fair-single-span-face-has-nothing-free-to-move/expected.json b/tests/kernel-cases/surfaces/cov-fair-single-span-face-has-nothing-free-to-move/expected.json new file mode 100644 index 000000000..212c47363 --- /dev/null +++ b/tests/kernel-cases/surfaces/cov-fair-single-span-face-has-nothing-free-to-move/expected.json @@ -0,0 +1,26 @@ +{ + "sources": [], + "what": "fair on a single-span cubic extrusion holding its edges: every control row is a boundary row or the one next to it, so nothing moves", + "source": "analytic", + "method": "the face: the Bezier (0,0), (13,8), (27,-8), (40,0) on XZ extruded 20 along -y or +y, B-spline degree (3, 1), one span each way. keep_edges holds the two boundary rows each side and the rows next to them: across the cubic that is all 4 rows, so the surface is unchanged: area = curve length 41.3983 (Gauss-Legendre 64) x 20 = 827.966", + "valid": false, + "body_count": 1, + "faces": 1, + "boundary_edges": 4, + "area_mm2": 827.9663653036151, + "surface_types": [ + "bspline" + ], + "splines": [ + { + "degree": [ + 3, + 1 + ], + "spans": [ + 1, + 1 + ] + } + ] +} diff --git a/tests/kernel-cases/surfaces/cov-fair-single-span-face-has-nothing-free-to-move/recipe.json b/tests/kernel-cases/surfaces/cov-fair-single-span-face-has-nothing-free-to-move/recipe.json new file mode 100644 index 000000000..24099e120 --- /dev/null +++ b/tests/kernel-cases/surfaces/cov-fair-single-span-face-has-nothing-free-to-move/recipe.json @@ -0,0 +1,72 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "Wave" + } + }, + { + "command": "sketch.spline.control_point", + "params": { + "points": [ + [ + 0, + 0 + ], + [ + 13, + 8 + ], + [ + 27, + -8 + ], + [ + 40, + 0 + ] + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "surface.extrude", + "params": { + "sketch": "Wave", + "curves": [ + "s1" + ], + "distance": 20, + "body_name": "Wave" + } + }, + { + "command": "surface.fair", + "params": { + "body": "Wave", + "iterations": 10 + } + } + ] +} diff --git a/tests/kernel-cases/surfaces/cov-fair-zero-strength-refused/expected.json b/tests/kernel-cases/surfaces/cov-fair-zero-strength-refused/expected.json new file mode 100644 index 000000000..7d910395c --- /dev/null +++ b/tests/kernel-cases/surfaces/cov-fair-zero-strength-refused/expected.json @@ -0,0 +1,8 @@ +{ + "sources": [], + "what": "fair with strength 0: refused, a step of nothing", + "source": "invariants", + "method": "strength is the fraction of the fairing step, greater than 0 and at most 1", + "outcome": "refused", + "refusal": "`strength` must be greater than 0 and at most 1" +} diff --git a/tests/kernel-cases/surfaces/cov-fair-zero-strength-refused/recipe.json b/tests/kernel-cases/surfaces/cov-fair-zero-strength-refused/recipe.json new file mode 100644 index 000000000..cb966d29d --- /dev/null +++ b/tests/kernel-cases/surfaces/cov-fair-zero-strength-refused/recipe.json @@ -0,0 +1,72 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "Wave" + } + }, + { + "command": "sketch.spline.control_point", + "params": { + "points": [ + [ + 0, + 0 + ], + [ + 13, + 8 + ], + [ + 27, + -8 + ], + [ + 40, + 0 + ] + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "surface.extrude", + "params": { + "sketch": "Wave", + "curves": [ + "s1" + ], + "distance": 20, + "body_name": "Wave" + } + }, + { + "command": "surface.fair", + "params": { + "body": "Wave", + "strength": 0 + } + } + ] +} diff --git a/tests/kernel-cases/surfaces/cov-match-a-solid-refused/expected.json b/tests/kernel-cases/surfaces/cov-match-a-solid-refused/expected.json new file mode 100644 index 000000000..cb90a12e9 --- /dev/null +++ b/tests/kernel-cases/surfaces/cov-match-a-solid-refused/expected.json @@ -0,0 +1,8 @@ +{ + "sources": [], + "what": "match on a closed solid: refused, a match rebuilds a surface", + "source": "invariants", + "method": "rebuilding one face of a solid would open it", + "outcome": "refused", + "refusal": "match rebuilds a surface body: this one is closed" +} diff --git a/tests/kernel-cases/surfaces/cov-match-a-solid-refused/recipe.json b/tests/kernel-cases/surfaces/cov-match-a-solid-refused/recipe.json new file mode 100644 index 000000000..8da4ee6c1 --- /dev/null +++ b/tests/kernel-cases/surfaces/cov-match-a-solid-refused/recipe.json @@ -0,0 +1,79 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + }, + "name": "Target sketch" + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 0, + 0 + ], + "p1": [ + 10, + 20 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "surface.patch", + "params": { + "sketch": "Target sketch", + "body_name": "Target" + } + }, + { + "command": "solid.box", + "params": { + "length": 8, + "width": 20, + "height": 5, + "corner": [ + 12, + 0, + 0 + ], + "body_name": "Block" + } + }, + { + "command": "surface.match", + "params": { + "body": "Block", + "target": "Target", + "edges": [ + [ + 10, + 10, + 0 + ] + ] + } + } + ] +} diff --git a/tests/kernel-cases/surfaces/cov-match-coplanar-sheet-onto-the-near-edge/expected.json b/tests/kernel-cases/surfaces/cov-match-coplanar-sheet-onto-the-near-edge/expected.json new file mode 100644 index 000000000..f102f07f4 --- /dev/null +++ b/tests/kernel-cases/surfaces/cov-match-coplanar-sheet-onto-the-near-edge/expected.json @@ -0,0 +1,39 @@ +{ + "sources": [], + "what": "a sheet 2 mm short of a coplanar sheet's edge, matched G2 onto it and stitched: flat, x 10..20", + "source": "analytic", + "method": "target x 0..10, skirt x 12..20, both in z = 0; the skirt's near boundary (x = 12) moves to the picked edge x = 10 repeating the plane's tangent and zero curvature, the far one (x = 20) stays with its plane: every condition is in z = 0, so the rebuilt face is the flat 10 x 20 strip; stitched: area 200 + 200 = 400, 4 to 6 free edges round the 20 x 20 outline, the seam at least G2", + "valid": false, + "body_count": 1, + "faces": [ + 1, + 2 + ], + "area_mm2": 400.0, + "boundary_edges": [ + 4, + 6 + ], + "bbox": { + "min": [ + 0, + 0, + 0 + ], + "max": [ + 20, + 20, + 0 + ] + }, + "continuity": { + "order": "g2", + "edges": [ + [ + 10, + 10, + 0 + ] + ] + } +} diff --git a/tests/kernel-cases/surfaces/cov-match-coplanar-sheet-onto-the-near-edge/recipe.json b/tests/kernel-cases/surfaces/cov-match-coplanar-sheet-onto-the-near-edge/recipe.json new file mode 100644 index 000000000..c40f2c2ec --- /dev/null +++ b/tests/kernel-cases/surfaces/cov-match-coplanar-sheet-onto-the-near-edge/recipe.json @@ -0,0 +1,122 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + }, + "name": "Target sketch" + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 0, + 0 + ], + "p1": [ + 10, + 20 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "surface.patch", + "params": { + "sketch": "Target sketch", + "body_name": "Target" + } + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + }, + "name": "Skirt sketch" + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 12, + 0 + ], + "p1": [ + 20, + 20 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "surface.patch", + "params": { + "sketch": "Skirt sketch", + "body_name": "Skirt" + } + }, + { + "command": "surface.match", + "params": { + "body": "Skirt", + "target": "Target", + "edges": [ + [ + 10, + 10, + 0 + ] + ], + "order": "g2" + } + }, + { + "command": "surface.stitch", + "params": { + "bodies": [ + "Target", + "Skirt" + ] + } + } + ] +} diff --git a/tests/kernel-cases/surfaces/cov-match-raised-sheet-down-onto-the-edge-g1/expected.json b/tests/kernel-cases/surfaces/cov-match-raised-sheet-down-onto-the-edge-g1/expected.json new file mode 100644 index 000000000..0401a02ea --- /dev/null +++ b/tests/kernel-cases/surfaces/cov-match-raised-sheet-down-onto-the-edge-g1/expected.json @@ -0,0 +1,19 @@ +{ + "sources": [], + "what": "a sheet 2 above and 2 short of a sheet's edge, matched G1 down onto it and stitched: the seam holds G1", + "source": "invariants", + "method": "target x 0..10 at z = 0, skirt x 12..20 at z = 2; the near boundary moves onto x = 10, z = 0 repeating the target's plane to G1, the far boundary stays at x = 20, z = 2. Graded: the seam's order as Continuity Analysis measures it, one body of 2 faces", + "valid": false, + "body_count": 1, + "faces": 2, + "continuity": { + "order": "g1", + "edges": [ + [ + 10, + 10, + 0 + ] + ] + } +} diff --git a/tests/kernel-cases/surfaces/cov-match-raised-sheet-down-onto-the-edge-g1/recipe.json b/tests/kernel-cases/surfaces/cov-match-raised-sheet-down-onto-the-edge-g1/recipe.json new file mode 100644 index 000000000..c9a5a8062 --- /dev/null +++ b/tests/kernel-cases/surfaces/cov-match-raised-sheet-down-onto-the-edge-g1/recipe.json @@ -0,0 +1,122 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + }, + "name": "Target sketch" + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 0, + 0 + ], + "p1": [ + 10, + 20 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "surface.patch", + "params": { + "sketch": "Target sketch", + "body_name": "Target" + } + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 2 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + }, + "name": "Raised" + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 12, + 0 + ], + "p1": [ + 20, + 20 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "surface.patch", + "params": { + "sketch": "Raised", + "body_name": "Skirt" + } + }, + { + "command": "surface.match", + "params": { + "body": "Skirt", + "target": "Target", + "edges": [ + [ + 10, + 10, + 0 + ] + ], + "order": "g1" + } + }, + { + "command": "surface.stitch", + "params": { + "bodies": [ + "Target", + "Skirt" + ] + } + } + ] +} diff --git a/tests/kernel-cases/surfaces/cov-match-raised-sheet-down-onto-the-edge-g3/expected.json b/tests/kernel-cases/surfaces/cov-match-raised-sheet-down-onto-the-edge-g3/expected.json new file mode 100644 index 000000000..470990699 --- /dev/null +++ b/tests/kernel-cases/surfaces/cov-match-raised-sheet-down-onto-the-edge-g3/expected.json @@ -0,0 +1,19 @@ +{ + "sources": [], + "what": "a sheet 2 above and 2 short of a sheet's edge, matched G3 down onto it and stitched: the seam holds G3", + "source": "invariants", + "method": "target x 0..10 at z = 0, skirt x 12..20 at z = 2; the near boundary moves onto x = 10, z = 0 repeating the target's plane to G3, the far boundary stays at x = 20, z = 2. Graded: the seam's order as Continuity Analysis measures it, one body of 2 faces", + "valid": false, + "body_count": 1, + "faces": 2, + "continuity": { + "order": "g3", + "edges": [ + [ + 10, + 10, + 0 + ] + ] + } +} diff --git a/tests/kernel-cases/surfaces/cov-match-raised-sheet-down-onto-the-edge-g3/recipe.json b/tests/kernel-cases/surfaces/cov-match-raised-sheet-down-onto-the-edge-g3/recipe.json new file mode 100644 index 000000000..57da8243d --- /dev/null +++ b/tests/kernel-cases/surfaces/cov-match-raised-sheet-down-onto-the-edge-g3/recipe.json @@ -0,0 +1,122 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + }, + "name": "Target sketch" + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 0, + 0 + ], + "p1": [ + 10, + 20 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "surface.patch", + "params": { + "sketch": "Target sketch", + "body_name": "Target" + } + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 2 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + }, + "name": "Raised" + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 12, + 0 + ], + "p1": [ + 20, + 20 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "surface.patch", + "params": { + "sketch": "Raised", + "body_name": "Skirt" + } + }, + { + "command": "surface.match", + "params": { + "body": "Skirt", + "target": "Target", + "edges": [ + [ + 10, + 10, + 0 + ] + ], + "order": "g3" + } + }, + { + "command": "surface.stitch", + "params": { + "bodies": [ + "Target", + "Skirt" + ] + } + } + ] +}