Wave 273/509: Continuity in words: surface dialogs and Continuity Analysis show no G codes (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop. - 28e3b8a19 jyviko: Continuity in words: surface dialogs and Continuity Analysis show no G codes - 81ecc872f jyviko: Guide: the Fillet dialog's Type and Corners in their new words - d1a8f0417 jyviko: Thread: a boss thread keeps clear of the plate below - a30a85698 jyviko: Thread: the chamfered tip reaches ISO 724's external minor diameter Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
This commit is contained in:
@@ -93,7 +93,7 @@ pub static COMMANDS: &[CommandSpec] = &[
|
||||
CommandSpec::new("solid.thread", "Thread", thread)
|
||||
.at("SOLID", "CREATE")
|
||||
.icon("thread")
|
||||
.params("face: [x,y,z] on a cylindrical face; form?: metric|trapezoidal|acme|buttress|buttress_asme (default: the one `designation` names, else metric; square is refused: no current standard defines it); designation?: the size, as its standard writes it: metric \"M8\", \"M8x1\", \"M16xPh3P1.5\" (ISO 68-1, ISO 261, ISO 965-1); trapezoidal \"Tr20x4\", \"Tr40x14(P7)\" (ISO 2904, ISO 2903); buttress \"S20x4\", \"S40x14(P7)\" (DIN 513, 3°/30°); acme \"1/2-10 ACME\" (ASME B1.5); buttress_asme \"2.5-8 BUTT\" (ASME B1.9, 7°/45°, basic profile; no size table) (default: the standard size that fits the face, a shaft its major diameter, a hole its drill); hand?: right|left|both (default right; both: a right- and a left-handed groove crossing); steep_flank?: start|end (buttress only, default end: the steep flank of the screw's teeth faces the thread's end, the way its axis points); starts?: 1..8 (lead = starts x pitch: that many grooves, each a turn's starts-th further round; a designation that gives the lead gives the starts); ease_in?, ease_out?: expr|standard|short (modelled threads: the groove fades out over this length, its section moving out of the material as it turns; standard 2.5 P, short 1.25 P per ISO 3508; ease_in at the end the thread starts from (`from`, or the start of its extent), ease_out at the other; it lies past the full-form length, up to a shoulder's clearance; at a free end, inside the face); tip?: none|chamfer (modelled external threads: each free end the thread reaches is chamfered after the groove is cut, ISO 4753's chamfered end, the last teeth tapering into the cone; chamfer_angle?: angle expr to the axis, default 45 deg; chamfer_depth?: expr, radial from the major diameter, default down to the external minor diameter, the largest ISO 4753 allows); extent?: full|length|up_to (default: length when `length` is given, up_to when `up_to` is, else full: the whole face); length?: expr (from the end the thread starts at); up_to?: [x,y,z] (a point, such as on a shoulder face: the thread runs to its place along the axis) | plane name or {origin, normal} (to where the plane crosses the axis); from?: [x,y,z] near the end of the face the thread starts at (default: the face's only free end, the one with no material past it; else the end the `face` point lies within a third of the face of; a pick in the middle of a face whose ends are alike is refused); modeled?: bool (default false). Cosmetic: the model is unchanged, model.threads lists it. Modeled: cuts the thread profile into the body: past a free end the groove runs out a pitch into the air (or through a chamfer); at a shoulder, a head or a blind hole's bottom it stops with its section clear of it, never cutting into it; a shaft thicker than the thread is refused with the size to make it, never turned down"),
|
||||
.params("face: [x,y,z] on a cylindrical face; form?: metric|trapezoidal|acme|buttress|buttress_asme (default: the one `designation` names, else metric; square is refused: no current standard defines it); designation?: the size, as its standard writes it: metric \"M8\", \"M8x1\", \"M16xPh3P1.5\" (ISO 68-1, ISO 261, ISO 965-1); trapezoidal \"Tr20x4\", \"Tr40x14(P7)\" (ISO 2904, ISO 2903); buttress \"S20x4\", \"S40x14(P7)\" (DIN 513, 3°/30°); acme \"1/2-10 ACME\" (ASME B1.5); buttress_asme \"2.5-8 BUTT\" (ASME B1.9, 7°/45°, basic profile; no size table) (default: the standard size that fits the face, a shaft its major diameter, a hole its drill); hand?: right|left|both (default right; both: a right- and a left-handed groove crossing); steep_flank?: start|end (buttress only, default end: the steep flank of the screw's teeth faces the thread's end, the way its axis points); starts?: 1..8 (lead = starts x pitch: that many grooves, each a turn's starts-th further round; a designation that gives the lead gives the starts); ease_in?, ease_out?: expr|standard|short (modelled threads: the groove fades out over this length, its section moving out of the material as it turns; standard 2.5 P, short 1.25 P per ISO 3508; ease_in at the end the thread starts from (`from`, or the start of its extent), ease_out at the other; it lies past the full-form length, up to a shoulder's clearance; at a free end, inside the face); tip?: none|chamfer (modelled external threads: each free end the thread reaches is chamfered after the groove is cut, ISO 4753's chamfered end, the last teeth tapering into the cone; chamfer_angle?: angle expr to the axis, default 45 deg; chamfer_depth?: expr, radial from the major diameter, default for a metric thread down to the external minor diameter d3 = d - 1.226869 P (ISO 724), the largest ISO 4753 allows; other forms give it); extent?: full|length|up_to (default: length when `length` is given, up_to when `up_to` is, else full: the whole face); length?: expr (from the end the thread starts at); up_to?: [x,y,z] (a point, such as on a shoulder face: the thread runs to its place along the axis) | plane name or {origin, normal} (to where the plane crosses the axis); from?: [x,y,z] near the end of the face the thread starts at (default: the face's only free end, the one with no material past it; else the end the `face` point lies within a third of the face of; a pick in the middle of a face whose ends are alike is refused); modeled?: bool (default false). Cosmetic: the model is unchanged, model.threads lists it. Modeled: cuts the thread profile into the body: past a free end the groove runs out a pitch into the air (or through a chamfer); at a shoulder, a head or a blind hole's bottom it stops with its section clear of it, never cutting into it; a shaft thicker than the thread is refused with the size to make it, never turned down"),
|
||||
CommandSpec::new("solid.shell", "Shell", shell)
|
||||
.at("SOLID", "MODIFY")
|
||||
.icon("shell")
|
||||
|
||||
Reference in New Issue
Block a user