Wave 273/509: Continuity in words: surface dialogs and Continuity Analysis show no G codes (and 3 more)

4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 28e3b8a19 jyviko: Continuity in words: surface dialogs and Continuity Analysis show no G codes
- 81ecc872f jyviko: Guide: the Fillet dialog's Type and Corners in their new words
- d1a8f0417 jyviko: Thread: a boss thread keeps clear of the plate below
- a30a85698 jyviko: Thread: the chamfered tip reaches ISO 724's external minor diameter

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
This commit is contained in:
jyviko
2026-10-27 01:58:51 -04:00
parent cf8ad08ec3
commit d1b64fb2ff
12 changed files with 389 additions and 48 deletions
+9 -1
View File
@@ -146,7 +146,7 @@ Fillets and chamfers handle straight edges between planar faces, whole smooth lo
neighbouring edges with mitred or spherical corners, and closed chains of curved edges (a rolling
ball). See the roadmap's known limitations for the rest.
**Curvature (G2)** in the Fillet dialog's **Radius Type** blends straight edges between two
**Curvature continuous** (G2) in the Fillet dialog's **Type** blends straight edges between two
planar faces with an exact quintic section. The tangent plane and curvature match each side
face: curvature goes to zero at both contact rails, unlike a circular G1 fillet. Each end
must meet one planar face; perpendicular and sloped planar ends are supported. Curved
@@ -162,6 +162,14 @@ Scripts and MCP use the same command, for example on a 20 mm box:
```
`type: "g2"` is an alias. Existing fillets still default to circular, constant-radius G1 blends.
Where three or more rounded edges meet at a corner, the Fillet dialog shows **Corners**: **Ball**
(the default, a piece of the rolling ball's sphere, tangent (G1) to each round) or **Smooth
patch** (`corner: "g2"`: the corner is set back along each edge and filled with a
curvature-continuous (G2) patch, so reflections run through it without a kink). A smooth patch
takes **Constant radius** and **Exact** fit. Its **Setback** is how far along each edge from the
corner the patch starts, one distance for every corner (`setbacks`); left empty, it is 1.5 × the
radius.
Feature references to faces and edges are stored by name, so an upstream edit that moves geometry
keeps them on the right face (see [Persistent naming](../dev/naming.md)). When a reference can't
be found, the feature warns instead of silently picking another face.
+13 -4
View File
@@ -83,9 +83,13 @@ radially.
**Tip** (`tip: chamfer`, ISO 4753's chamfered end): at each free end of a modelled external
thread, after the groove, the material outside a cone `chamfer_angle` to the axis (45°) reaching
d_f = d − 2 `chamfer_depth` at the end (default the external minor diameter, the largest the
standard allows) is cut, the last teeth tapering into it. An internal thread takes the hole's
countersink instead.
d_f = d − 2 `chamfer_depth` at the end is cut, the last teeth tapering into it. ISO 4753 bounds
d_f by the minor diameter; the default is that bound, the external minor diameter d3 = d −
1.226869 P of ISO 724 (8.160 for M10), which lies below the modelled basic root d1. The cone
therefore crosses the root and leaves the end a whole disk of d3 inside a whole conical ring; a
cone ending on the root itself would pinch to nothing wherever the groove reaches the end. ISO
4753 is for ISO metric threads, so the other forms give `chamfer_depth`. An internal thread takes
the hole's countersink instead.
## Sources
@@ -104,4 +108,9 @@ countersink instead.
- ASME B1.9 (buttress inch): 7°/45°, basic height of engagement 0.6 P; the flat follows from the
fundamental triangle H = P / (tan 7° + tan 45°) = 0.89064 P truncated equally at crest and root.
- ISO 3508 (thread runouts) and ISO 4753 (ends of parts with external threads) for the runout and
the chamfered tip.
the chamfered tip. ISO 4753:2011, figure 1 b) (chamfered end CH; the public preview at
<https://cdn.standards.iteh.ai/samples/55928/38ddde12863b4c2db35dc929fd502a4d/ISO-4753-2011.pdf>):
the end's diameter "Maximum diameter at the minor thread diameter", the angle ≤ 50°, the
incomplete thread u ≤ 2 P.
- ISO 724 (external minor diameter d3 = d1 − H/6 = d − 1.226869 P, M10x1.5: 8.16), as given at
<https://www.valvias.com/miscellanea-metric-thread-din-13.php>.