Wave 273/509: Continuity in words: surface dialogs and Continuity Analysis show no G codes (and 3 more)

4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 28e3b8a19 jyviko: Continuity in words: surface dialogs and Continuity Analysis show no G codes
- 81ecc872f jyviko: Guide: the Fillet dialog's Type and Corners in their new words
- d1a8f0417 jyviko: Thread: a boss thread keeps clear of the plate below
- a30a85698 jyviko: Thread: the chamfered tip reaches ISO 724's external minor diameter

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
This commit is contained in:
jyviko
2026-10-27 01:58:51 -04:00
parent cf8ad08ec3
commit d1b64fb2ff
12 changed files with 389 additions and 48 deletions
+9 -1
View File
@@ -146,7 +146,7 @@ Fillets and chamfers handle straight edges between planar faces, whole smooth lo
neighbouring edges with mitred or spherical corners, and closed chains of curved edges (a rolling
ball). See the roadmap's known limitations for the rest.
**Curvature (G2)** in the Fillet dialog's **Radius Type** blends straight edges between two
**Curvature continuous** (G2) in the Fillet dialog's **Type** blends straight edges between two
planar faces with an exact quintic section. The tangent plane and curvature match each side
face: curvature goes to zero at both contact rails, unlike a circular G1 fillet. Each end
must meet one planar face; perpendicular and sloped planar ends are supported. Curved
@@ -162,6 +162,14 @@ Scripts and MCP use the same command, for example on a 20 mm box:
```
`type: "g2"` is an alias. Existing fillets still default to circular, constant-radius G1 blends.
Where three or more rounded edges meet at a corner, the Fillet dialog shows **Corners**: **Ball**
(the default, a piece of the rolling ball's sphere, tangent (G1) to each round) or **Smooth
patch** (`corner: "g2"`: the corner is set back along each edge and filled with a
curvature-continuous (G2) patch, so reflections run through it without a kink). A smooth patch
takes **Constant radius** and **Exact** fit. Its **Setback** is how far along each edge from the
corner the patch starts, one distance for every corner (`setbacks`); left empty, it is 1.5 × the
radius.
Feature references to faces and edges are stored by name, so an upstream edit that moves geometry
keeps them on the right face (see [Persistent naming](../dev/naming.md)). When a reference can't
be found, the feature warns instead of silently picking another face.