Wave 273/509: Continuity in words: surface dialogs and Continuity Analysis show no G codes (and 3 more)

4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 28e3b8a19 jyviko: Continuity in words: surface dialogs and Continuity Analysis show no G codes
- 81ecc872f jyviko: Guide: the Fillet dialog's Type and Corners in their new words
- d1a8f0417 jyviko: Thread: a boss thread keeps clear of the plate below
- a30a85698 jyviko: Thread: the chamfered tip reaches ISO 724's external minor diameter

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
This commit is contained in:
jyviko
2026-10-27 01:58:51 -04:00
parent cf8ad08ec3
commit d1b64fb2ff
12 changed files with 389 additions and 48 deletions
+13 -4
View File
@@ -83,9 +83,13 @@ radially.
**Tip** (`tip: chamfer`, ISO 4753's chamfered end): at each free end of a modelled external
thread, after the groove, the material outside a cone `chamfer_angle` to the axis (45°) reaching
d_f = d − 2 `chamfer_depth` at the end (default the external minor diameter, the largest the
standard allows) is cut, the last teeth tapering into it. An internal thread takes the hole's
countersink instead.
d_f = d − 2 `chamfer_depth` at the end is cut, the last teeth tapering into it. ISO 4753 bounds
d_f by the minor diameter; the default is that bound, the external minor diameter d3 = d −
1.226869 P of ISO 724 (8.160 for M10), which lies below the modelled basic root d1. The cone
therefore crosses the root and leaves the end a whole disk of d3 inside a whole conical ring; a
cone ending on the root itself would pinch to nothing wherever the groove reaches the end. ISO
4753 is for ISO metric threads, so the other forms give `chamfer_depth`. An internal thread takes
the hole's countersink instead.
## Sources
@@ -104,4 +108,9 @@ countersink instead.
- ASME B1.9 (buttress inch): 7°/45°, basic height of engagement 0.6 P; the flat follows from the
fundamental triangle H = P / (tan 7° + tan 45°) = 0.89064 P truncated equally at crest and root.
- ISO 3508 (thread runouts) and ISO 4753 (ends of parts with external threads) for the runout and
the chamfered tip.
the chamfered tip. ISO 4753:2011, figure 1 b) (chamfered end CH; the public preview at
<https://cdn.standards.iteh.ai/samples/55928/38ddde12863b4c2db35dc929fd502a4d/ISO-4753-2011.pdf>):
the end's diameter "Maximum diameter at the minor thread diameter", the angle ≤ 50°, the
incomplete thread u ≤ 2 P.
- ISO 724 (external minor diameter d3 = d1 − H/6 = d − 1.226869 P, M10x1.5: 8.16), as given at
<https://www.valvias.com/miscellanea-metric-thread-din-13.php>.