Commit Graph

72 Commits

Author SHA1 Message Date
TaeHeon Kim 6c9afc6f7e Start the window on OCLP Macs with SYSTEM_VERSION_COMPAT=1 (#3080) (#8930)
On Macs patched with OpenCore Legacy Patcher the OS reports a newer
macOS version than the GPU's Metal compiler supports, so wgpu picks a
shader standard the compiler refuses (`invalid value 'metal3.2'`) and
the window never draws.

The variable has to be set before the process starts, and Rust 2024
makes `set_var` unsafe (this crate denies unsafe code), so main()
now re-launches the binary with SYSTEM_VERSION_COMPAT=1 when the OCLP
NVRAM key (OCLP-Version) is present, and exits with the child's status.
A process that already has the variable set never re-launches, so
there is no loop and a user's own value is respected. If the check or
the spawn fails, startup continues normally.

Tested on an OCLP Mac: one re-launch message, graphics render
correctly; with SYSTEM_VERSION_COMPAT=1 set beforehand it does not
re-launch.

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-30 13:48:19 +00:00
PaddleStroke 6e39efd4ac Theme: System follows the desktop's dark/light setting on Linux GNOME (#7944) (#8123)
* claim: #7944

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Theme: System follows the desktop's dark/light setting on Linux (#7944)

On GNOME (Wayland, or X11 through XWayland) the window toolkit never reports
the desktop's dark or light preference, nor its changes, so Theme: System kept
its colours. The Linux app now reads org.freedesktop.appearance color-scheme
through the XDG Desktop Portal's Settings interface (then GNOME's color-scheme
and gtk-theme when it has no preference) on a thread of its own, follows the
portal's SettingChanged signal, and falls back to gsettings or a slow poll.
The window reads the answer through Services::desktop_dark; the decision from
the raw values is prefs::desktop_prefers_dark. Windows and macOS keep the
window toolkit's theme.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 13:25:23 +00:00
N3MI-DG 63923da2ca Viewport: an opened design is framed at the home view, in the middle of the view (#9195) (#9204)
* claim: #9195

* Viewport: an opened design is framed at the home view, in the middle of the view (#9195)

A fit the viewport cannot frame yet is kept and asked again on the next frame instead
of being consumed and lost, so a design opened from the Home screen or by launching on
a file no longer comes up at the default camera, wherever its own coordinates put it.

Framing then centres the model on the view rather than on the free rectangle between
the floating controls: `Layout` carries `middle`, the view without the panels, computed
before the compass, the navigation bar and the OK/Cancel corner join the obstacles. The
model is still sized to `drawable`, so it stays clear of every control, but only a panel
moves it.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* Viewport: keep the centred fit clear of the controls, and frame --sample (#9195)

The fit framed the model into a rectangle the size of `drawable` centred on `middle`, which is
not inside `drawable`, so the model could sit under the compass, the navigation bar or the
render product frame. The model is now sized to `drawable` as before, and only the room left
over in it moves the model towards the middle of the view.

`s27_move_triad` turns the Z ring on its far side: the model now sits further right, and the
Move dialog that docks on the right afterwards covered the ring's old grab point.

A launch with `--sample` builds the design straight into the session and never asked for a
fit; it now comes up at the home view, framed, like an opened design.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Viewport tests: the cursor orbit's pivot keeps the pixel it was picked on (#9195)

With the model now centred on the view, one of the test's perspective drag points lands within
the pick tolerance of the box's top edge, and the pick snaps the pivot onto that edge, a few
pixels from the cursor. The orbit keeps that point still, as it should; the test compared it
with the cursor instead of with where it started.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
2026-10-30 09:14:18 +00:00
MarkusRe 0baf49b25f Windows: never load a dxcompiler.dll found on PATH; FXC unless DXC ships beside the app (#6756) (#7923)
* claim: #6756

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Windows: never load a dxcompiler.dll found on PATH; FXC unless DXC ships beside the app (#6756)

wgpu's Dx12Compiler::Auto loads dxcompiler.dll by name, so Windows takes the
first one on PATH. SolidCraft ships none, and DXC 1.8.2505 from other programs'
folders (Obsidian, NVIDIA SDK Manager) crashed every start with
EXCEPTION_ILLEGAL_INSTRUCTION during the viewport shader compile.

solidcraft_gpu::dx12_compiler() now chooses: WGPU_DX12_COMPILER as wgpu reads
it when it names a compiler; otherwise DXC from the dxcompiler.dll beside the
program, by its full path, else FXC. The window, the headless/CLI instance and
the test helpers start with it, and dx12_compiles_with_fxc follows it.
WGPU_DX12_COMPILER=dxc keeps the old lookup.

Fixes #6756

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 04:14:57 +00:00
raykholo dd2e44bb12 Raise the largest file SolidCraft opens with a setting or launch flag (#4086) (#7565)
* claim: #4086

* Raise the largest file SolidCraft opens with a setting or launch flag (#4086)

* Translate the file size limit strings

* Size limits: design files are .sc now, .solidcraft still read
2026-10-28 16:52:29 +00:00
froglemonade2 dba3a226f6 Closing from the background brings the window forward to ask about unsaved changes (#7783) (#7784)
* Closing from the background: the window comes forward to ask about unsaved changes

Right-click › Close on the taskbar while another app had the focus showed the
"save changes?" prompt in a window that stayed behind, so the close seemed to do
nothing. When the close stops at the prompt, the window now asks for the focus
(unminimizing it first) and for the user's attention, which is what native
Wayland offers (xdg-activation) and marks the taskbar entry where the system
refuses the focus. A window already in focus is left alone.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* X11: ask the window manager to raise the window as a user action

winit's Focus asks as an application, which KWin's focus-stealing prevention
refuses for a window last used before the switch away: it raised nothing and,
since the attention request was then skipped, did not even mark the taskbar.
On X11 send _NET_ACTIVE_WINDOW with source 2 (a direct user action) through
x11rb, which restores a minimized window too; native Wayland keeps the
attention request. Moves the logic into come_forward.rs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Come forward once the taskbar menu is gone, without flicker

KWin raised the window, then the taskbar's closing context menu handed the
focus back to the previous app 2 to 11 ms later, so the window only came
forward some of the time; asking again made it flicker. Ask 120 ms after the
close instead, and again only when the focus is taken back within 50 ms of a
request (a slow menu) or never came. A later switch away is the user's own and
the window stays behind.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 16:09:25 +00:00
bherbruck 03b8f4138b New designs save as .sc; .solidcraft files still open (#7325)
* claim: new designs save as .sc

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* New designs save as .sc; .solidcraft files still open and keep their name on Save

DESIGN_EXT is now "sc"; DESIGN_EXTS lists sc, solidcraft and solvecraft and
every open path (dialogs, drag-drop, recent files, CLI, MCP, links, the web
picker) accepts all three. Save of an opened .solidcraft file writes that
file; Save As, autosave, recovery and crash reports use .sc. Windows, macOS
and Linux register .sc alongside the older extensions.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Update UI tests for the .sc default extension

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 22:41:40 +00:00
bherbruck 7a6c884418 Change the app id to io.tangencylabs.solidcraft, with aliases for existing installs (#7681)
The app id moves from ai.storyteller.solidcraft to io.tangencylabs.solidcraft: macOS bundle id
(the CLI signs as io.tangencylabs.solidcraft.cli), Linux desktop/metainfo/MIME file names, icon
name, Wayland app_id / X11 class, Flatpak, Snap common-id, nfpm/FreeBSD/Nix/AppImage staging,
the web app's icon paths and the docs.

Existing installs keep working: the Flatpak repository marks both old ids
(ai.storyteller.solidcraft and ai.storyteller.solvecraft) end-of-life with a rebase straight to
the new id, re-marking the solvecraft ref that pointed at the 0.8 id; the manifest grants
read-only access to both old ~/.var/app folders and the first launch copies settings and
autosaves from the newest one; AppStream <replaces>/<provides> and X-Flatpak-RenamedFrom list
both; the AppImage removes menu entries it wrote under either old id. The data and settings
folders (solidcraft / SolidCraft) are unchanged. The MSI UpgradeCode and ProgIDs are unchanged.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 17:16:40 -04:00
raykholo d2f0627421 Follow a theme file and reload it when it changes (#7573) (#7574)
* claim: #7573

* Follow a theme file and reload it when it changes (#7573)

* Translate the follow-a-theme-file strings
2026-10-27 20:08:12 +00:00
semmelrinde 0d18757ed7 File dialogs open in the folder used last (#7756) (#7807)
* claim: #7756

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* File dialogs open in the folder used last (#7756)

The desktop dialogs never said where to open, and the Linux ones then
start in the home folder every time. Open, Insert, attach, Save As and
Export now open in the folder of the file last chosen in a dialog, or of
the open design when another design becomes the open one, whichever came
last. Also fixes #7735.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 19:19:10 +00:00
Mateusz Sych 9a7b657fdc Assistant: connect the last-used agent on startup (#7009) (#7124)
* claim: #7009

* Assistant: connect the last-used agent and open the panel at start (#7009)

Two Settings > AI options, off by default: when SolidCraft starts, connect
the agent started last (once the installed agents are known; a missing one
is not swapped for another) and open the Assistant panel. Not for runs
started with --control.

A connection that never gets ready (no agent, start error, the agent ends
while starting) is a new Failed state: the header reads Connection failed
and Connect reads Retry. The control channel reports it as "failed" and
takes connect_at_start / open_at_start.

* Assistant: keep the start-up agent when a design replaces the blank one (#7009)

Opening a design over the blank design SolidCraft starts with reset its
chat and stopped the agent connected at start. A chat not asked anything
yet now starts over in place and keeps its agent. Turning AI features
off also drops a start-up connection still waiting for discovery.

* i18n: Arabic, Hebrew and Vietnamese for the start-up options (#7009)

ar, he and vi are complete catalogs on main now, so every new English
message needs them.

---------

Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
2026-10-27 16:38:26 +00:00
DuBearte b47f82d406 Reopen the designs open at the last quit (#5542) (#6006)
* claim: #5542

* Reopen the designs that were open at the last quit (#5542)

A launch with no file to open reopens the saved designs that were open
when SolidCraft was last closed, in tab order. Designs never saved and
files that are gone are skipped. Preferences > General > Reopen designs
turns it off; a launch driven over --control or with --sample starts fresh.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Move the new messages to a pending locale file

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-27 03:34:04 +00:00
yhamil04 ebb6cc53ab Crash reports: capture native crashes on macOS (#2113) (#6593)
* claim: #2113

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Crash reports: capture native crashes on macOS (#2113)

A signal handler for SIGSEGV, SIGBUS, SIGILL, SIGFPE, SIGTRAP and SIGABRT
writes the same <journal>.native.json as the Windows exception filter: the
signal, the faulting module and offset, the thread and a frame-pointer walk.
The next start reports it instead of "an unclean exit". The signal then goes
on to the previous handler or the default action, so macOS still writes its
own crash report.

native_crash_macos.rs joins the crash-safety skill's list of files that may
use unsafe (no safe API can catch these signals).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 00:14:00 +00:00
The Nomad afd6a5c584 Send to Slicer: send the selected bodies to a slicer (#2595) (#3600)
* Add Open in Slicer for the selected bodies (#2595)

One command saves the selected bodies as a 3MF in millimetres (an STL if the 3MF can not be written) and opens it in the last slicer used. It is on the File menu, the Mesh tab and the body right-click menu. The first time, or when that slicer is gone, it asks which one with the same list Save as mesh uses. The Save as mesh dialog is unchanged.

* Send slicer files to a private per-user folder (#2595)

Files sent to a slicer used to go to a shared folder in the temp directory. They now go to the user cache folder (mode 0700 on Unix), under a name that stays the same for the same design and bodies, so sending again replaces the file and the slicer can reload it. The file is written to a temporary name and renamed into place. If the name can not be replaced, as on Windows while the slicer holds the file open, the copy gets a number and the status line says so. Files older than seven days are deleted at startup. The first send tells the user that sending again replaces the open file, and so does the tooltip of Open in Slicer. Send to slicer in Save as mesh uses the same path.

* Open files in a running slicer (#2595)

PrusaSlicer, SuperSlicer, Bambu Studio and Cura are started with --single-instance, so a slicer that is already open loads the file instead of opening a second window. OrcaSlicer has no such flag and is left alone, and macOS bundles are single-instance already. PrusaSlicer 3.0 ships a launcher entry that already carries --single-instance-on-url; it keeps that one and never gets a second flag. It is a preference, on by default, and scripts can pass single_instance. Preferences also gets a button to forget the slicer Open in Slicer remembers.

* List slicers the desktop entries say open 3MF or STL (#2595)

On Linux the scan of desktop entries now also lists a program that claims 3MF or STL in MimeType, even when it is not in our table of known slicers. The table still supplies names, ids, icons and flags for the ones it knows. Entries marked NoDisplay or Hidden are skipped, and so are terminal programs and SolidCraft itself. The existing size and count limits stay. The Windows scan now looks inside a Prusa3D folder, where PrusaSlicer installs itself.

* Only start slicers the user can see or chose (#2595)

file.save_mesh took a slicer parameter that could be any executable path, so a script or an MCP client could run any program. The slicer now has to be one of the detected slicers (by id or name) or a program the user already added under Custom, which the app hands to the engine from its settings. The same rule holds for file.open_in_slicer. The agent chat already asked before any file command; its question now also names the slicer.

* Review fixes for Open in Slicer (#2595)

The file name hash keeps all 64 bits instead of 32. When Open in Slicer has to fall back to an STL, the status line now says so. The engine test that sets the chosen programs clears them again. The unused "could not make the folder" message is gone from the catalogs, and the docs say plainly that finding slicers by file type is Linux only.

* Keep unsaved designs apart and hide Open in Slicer in the browser (#2595)

Two unsaved designs with the same name and body names got the same file in the slicer folder. Every document now has a uid that is new for each New, Open and Recover and stays the same for the life of the document, and the file name uses it (with the process id) until the design has a path. At the first Save As the name changes to the path-based one, so the slicer gets one new file; the old one goes with the seven-day sweep.

The browser can not start a program, so Open in Slicer is now disabled there: the engine command reports why, the File menu item and the body and component right-click items are greyed, and starting it anyway says so on the status line instead of opening a dialog. The Save as mesh dialog keeps its browser guard for the open flow too.

* Put the Session doc comment back on Session (#2595)

The new NEXT_UID static had landed between the doc comment and the struct it describes.

* List every install of a slicer, and test the first Save As (#2595)

Detection kept one entry per known slicer, so a system PrusaSlicer 2.9 and a Flatpak 3.0 beta showed up as one. Every distinct install is listed now. The same program found twice, through a desktop entry and through PATH, is still one. When a slicer has several installs, each gets an id made from where it was found (prusa#comprusa3dprusaslicer) that stays the same on every run, and a name worked out from its command and location without running anything: PrusaSlicer (system), PrusaSlicer (Flatpak, beta), PrusaSlicer (AppImage). A lone install keeps its plain id and name. The plain id or name still picks the first install, so a remembered "prusa" keeps working. Single-instance flags and the other per-slicer behaviour go by the id without the install part.

Also a test that the first Save As changes the file name once and later sends keep the name that comes from the saved path.

* Start PrusaSlicer 3.0 first and send the file once it is ready (#2595)

PrusaSlicer 3.0 starts through slic3r-app-launcher, which ignores a file given at a cold start whatever the flag, and loads it over D-Bus when an instance is already running. A small table in slicers.rs names such slicers by their command; today it holds that launcher, so PrusaSlicer 2.9 and OrcaSlicer are untouched. Ready means a name starting with com.prusa3d.prusaslicer.BroadcastListener. is on the session bus, read from busctl --user list with no new dependency. If busctl is missing or fails, nobody waits and the file is sent as before.

When the slicer is not ready, Open in Slicer starts it without the file and looks every 200 ms for up to 10 seconds. The wait runs on another thread, so the window stays live, and the status line says Starting PrusaSlicer. Once the name appears the file is sent with the same arguments as before. If the limit passes, the status line says the slicer did not respond, that the file is already saved, and to send again. A second click during the wait only repeats the Starting line, so there is one launch and one send. Scripts calling file.open_in_slicer wait inside the command by default, or pass wait: return or no.

* Always show the slicer picker for Open in Slicer (#2595)

File > Open in Slicer, the Mesh tab entry and the right-click entry now always open the picker, with the slicer used last time pre-selected, so the usual case is one click or Enter. Scripts and file.open_in_slicer with a slicer still send without a dialog. The preference button that forgot the remembered slicer is gone: it could no longer make anything ask again, and it did not clear the pre-selection either. The guide says how it works now.

* Leave Bambu Studio out of the single-instance list (#2595)

Open files in a running slicer now adds --single-instance for PrusaSlicer, SuperSlicer and Cura only. Bambu Studio is started as it is, so it may open a second window. A test pins that, for the detected slicer and for one the user picked as a custom program. The guide and the preference tooltip no longer name Bambu Studio as getting the flag.

* Sort the English catalog and leave features.md to the generator (#2595)

cargo xtask lists wanted one message moved in en.json after the rebase. docs/features.md is written by the Generated files workflow on main, so the row I had added by hand is gone from this branch; the workflow adds Open in Slicer when it lands.

* Drop the unused folder message from the Vietnamese catalog (#2595)

Vietnamese arrived on main after I removed ui.save_mesh_temp_failed from the other catalogs, so the check that every translated id exists in English failed on it. Nothing uses the message any more.

* Say so when a started slicer can not be found again (#2595)

After Open in Slicer had started a slicer on its own, a failure to look it up again to send the file just returned, so the status line stayed on Starting and then nothing. It now says the slicer was started, that it can not be found to send the file, and where the file is saved. A test covers it.

* Say why a failed busctl ends the wait (#2595)

If busctl fails partway through a wait, the wait stops and the file is sent, the same as when busctl can not be run at all. That is on purpose: a file sent too early is dropped quietly and costs one more send. A comment in wait_for_ready says so.

* Keep the readiness wait inside its limit (#2595)

wait_until asked the probe before checking the deadline, including right after a sleep, so a yes could be accepted after the limit, and busctl ran with no timeout, so one look could outlast the whole wait. The deadline is checked first now, the probe is told how much time is left, and busctl is given at most two seconds (less near the end of a wait) and is killed after that. A hung busctl counts as not telling, which sends the file as before. This covers the first look on the UI thread too. Tests cover a slow probe, the shrinking time left, and a fake busctl that hangs, answers and fails.

* Send the file that was already written once the slicer is ready (#2595)

When the wait for a started slicer ended, the UI ran file.open_in_slicer a second time. That exported the design again on the UI thread, from whatever the session looked like by then, and could write a numbered copy while the timeout message still named the first file. The wait now keeps the slicer it found and the answer of the first call, and opens the file that was written. A test changes the design during the wait and shows the same file is sent, is not written again, no command runs, and no second file appears.

* Send with the single-instance flag after starting a slicer (#2595)

After Open in Slicer has started a launcher that needs a start first, the file has to reach the instance that is now running, so the send that follows a start carries --single-instance whatever the preference says. A normal send, to a slicer that was already up, still follows the preference. A comment in both places says why. The test uses a plain launcher command with the preference off: the normal send has no flag and the send after a start has it.

* Find the remembered slicer again after an uninstall (#2595)

With two installs the remembered key is prusa#prusaslicer. Remove the other install and the lone one is plain prusa, which matched neither the exact key nor the plain-key fallback, so the picker fell back to the first slicer in the list, maybe a different one. The key is now also matched by the part before the #, so the same slicer is pre-selected. A test covers the lone install, a plain key with two installs, an exact key, and that another slicer is never picked.

* Say a second click did not send anything while a slicer starts (#2595)

While a started slicer is being waited for, another click showed Starting <the first slicer> even when it had picked another slicer or other bodies. It now says it is still waiting for that slicer and that nothing else was sent. The test checks the wording and that it names the slicer being waited for.

* Label macOS installs by their application (#2595)

An open -a command resolved its program to /usr/bin/open, so every application on a Mac was labelled system. Labels for open commands now come from the .app path: /Applications is system and a folder under home is shown as ~/Applications. A test with two PrusaSlicer.app bundles and a made-up home checks both labels and that the ids differ.

* Pick the same place for a program found twice every time (#2595)

When two desktop files, or a desktop file and PATH, pointed at one program, the first one read was kept and its file name went into the id, so the ids could change with the order the folders were read in even though nothing was installed or removed. The place that sorts first now speaks for the program. A test with two aliases and a second install lists them with the folders in both orders and gets the same ids and commands.

* Treat flatpak run spelled two ways as one install (#2595)

flatpak run ... and /path/to/flatpak run ... with the same arguments had different install keys, so one invocation could be listed twice. The launcher is now compared by its file name and the arguments are kept, so both give the same key, while a different branch is still its own install. The test uses a real launcher file so the full-path entry is not skipped as stale.

* Say plainly that a late yes is accepted on purpose (#2595)

The comment on wait_until said a slow probe could not accept a yes that came too late. That was not what the code does: no probe is started after the limit, but one already running may finish and its yes is taken, because the file should still go. The comment now says so, with the bound: the limit plus that last probe, which in production is given the time left and so ends by the limit. A test has a probe that runs past the limit and says yes, and checks it is accepted and the wait stays within limit plus the probe time, and that a probe that says no is not followed by another.

* Give reading busctl the same deadline as running it (#2595)

After busctl exited, the output was read with a join that could wait forever if a process it left behind kept the pipe open. The reader now hands the text back over a channel and the wait uses the time that is left of the same limit, and gives up with nothing otherwise. The polling sleep no longer overshoots the time left either. A test uses a fake busctl that backgrounds a sleep with its output inherited and exits at once: the call returns within its limit.

* Tell two different flatpak launchers apart (#2595)

Comparing only the file name of the launcher made /opt/tool-a/flatpak run ... and /usr/bin/flatpak run ... with the same arguments one install even when they are different programs. The launcher is now found the way any program is, through PATH and with links followed, and its name stands in only where it can not be found. The test has flatpak on PATH and the same file by its path as one install, a different executable of the same name as a second, a different branch as a third, and the fallback when there is no PATH.

* Keep waiting when busctl is slow, send only when it is missing or fails (#2595)

Since the busctl timeout, a slow busctl came back as "can not tell", and that was read as send now. One slow look, likely just when a cold PrusaSlicer 3.0 is starting under load, ended the wait and sent the file early, which gets dropped. The look now says why it has nothing: slow means not up yet, so the wait goes on to its limit and then reports that the slicer did not respond; a missing or failing busctl still means it can not be told and the file is sent. The comments name only those two cases. Tests use fake busctl programs: one that hangs keeps the wait going to the limit and times out, a missing one sends at once, one that says not up and then fails sends, and one that names the slicer is ready.

* Do not open an empty path when the answer had no file (#2595)

If the answer kept for a started slicer had no path, the send ran open with an empty string. The tick now says there is no file to send and starts nothing. The test gives a wait with no path, checks the error line, and that the fake slicer was never run.

* Drop the unused folder message from the Danish catalog (#2595)

Danish arrived on main with ui.save_mesh_temp_failed, which this branch removed from English because nothing uses it any more, so the check that every translated id exists in English failed. The entry is gone from the Danish catalog too.

* Always start the 3.0 launcher with the single-instance flag (#2595)

A hand run showed that starting the PrusaSlicer 3.0 launcher with no file while a 3.0 is already running forwards to it and exits when the flag is there, but opens a second full window when it is not. A slow first look at the bus can start the launcher twice, and with the preference off the flag was stripped. A slicer that has to be started first now keeps the flag on that start whatever the preference says, the same reasoning as the send after a start; when nothing runs the flag does no harm. A normal send with the preference off still has none. The test covers the launcher entry, a bare launcher command, a normal send and a slicer that is not on the table.

* Swap --single-instance-on-url where it does not hand the file over (#2595)

A hand run on the PrusaSlicer 2.9.6 Flatpak showed that its entry's --single-instance-on-url does not forward a file to the running instance: every send opened a new one, three after a cold start and two sends. With plain --single-instance the second process finds the first, forwards, and exits. So when a command carries --single-instance-on-url and the slicer is not on the wait table, that is, not the 3.0 launcher, it is replaced by --single-instance, with the file markers handled as before, when the preference is on, and stripped when it is off. On the 3.0 launcher the flag does forward and stays. The comment on the rule says why. A test uses the real 2.9.6 and 3.0 Flatpak command lines.

* Cut long slicer names to fit the picker (#2595)

With installs listed on their own, a name like PrusaSlicer (Flatpak, master) is wider than its row. The list painted it with no limit, so it ran out of the popup, and the closed selector wrapped it onto a second line. The list now lays the name out on one line that ends in an ellipsis when it does not fit, the selector truncates, and the full name is in the tooltip when it was cut (for a program the user added, ahead of the delete hint). A test checks that a long name is cut to one line within the width and a short one is left alone.

* Keep the 3.0 launcher's flag on a send whatever the preference says (#2595)

A hand run with the single-instance preference off showed the 3.0 launcher needs its flag on a send too, not only on a start: a cold start with a file and no flag loaded nothing, and a send to a running 3.0 left a launcher process that never forwarded. A slicer on the wait table now gets the flag on every launch, as it already did when started alone. The doc comment says why. The preference text, in English, Japanese and Chinese, and the guide now say that PrusaSlicer 3.0 is the exception to turning this off. The tests that took the flag away with the preference off now expect it, for the launcher entry, a bare launcher command and the 3.0 Flatpak line; the test of the send in the UI checks the first send carries it.

* Keep the install-flag swap to PrusaSlicer, found by what it is (#2595)

The swap of --single-instance-on-url for --single-instance ran for any program whose command had the flag, so another program with that flag would have been rewritten. It is now a PrusaSlicer rule: it applies to a slicer recognised as PrusaSlicer by its identity, its id or, for a program the user picked, the name it goes by, never by a version number. The single-instance table uses the same identity check. A test keeps the flag of a program that is not PrusaSlicer, strips it when the preference is off, and swaps it for a picked program named PrusaSlicer.

* Do not promise a hard bound in the wait comment (#2595)

The comment on wait_until said the production probe ends by the limit. Its clock starts after the process is spawned, and killing and reaping the process and scheduling are not bounded by it, so it is a polling and read budget with process overhead on top. The comment says that. Comment only.

* Tell PrusaSlicer 2 from 3 by the installed version (#2595)

PrusaSlicer 2 and 3 need different handling, and the rules had to guess from the command line. Each install of PrusaSlicer now carries its major version, read when it is detected from the release at the top of its appstream metadata and never by running the program: a Flatpak's own files (the branch the command names, else the current one), or the metainfo file beside a desktop entry. PrusaSlicer older than 3 is sent the file with --single-instance in place of --single-instance-on-url, which does not hand a file over there, and is not waited for. PrusaSlicer 3 and newer keeps the launcher's flag, is started on its own, waited for, and sent the file. When the version can not be read, the command decides as before: the slic3r-app-launcher launcher counts as 3, and any other entry is left as it is. A program that is not PrusaSlicer is untouched whatever its flags. Tests use metadata fixtures, no Flatpak: 2.9.6, 3.0.0-alpha10, a branch that is not installed, a system package, an unreadable version with and without the launcher, and a non-PrusaSlicer program with the same flag.

* Make the busctl wait tests steady under load (#2595)

One of them failed once in a full run at its first assertion and passed alone. A script that has only just been written can fail to start (text file busy) while another test forks, and that reads as a busctl that is missing. The fake programs are now started once, patiently, with a flag they answer at once, before a test relies on them; a hanging one uses exec so it is killed cleanly. The time bounds that could trip on a busy machine are several seconds now, and the checks are on outcomes: not ready and keeps waiting, send now, and the number of looks. Thirty runs alone, thirty of the whole slicers filter and thirty of the busctl tests under eight busy loops all pass.

* Say what the busctl reader thread leaves behind (#2595)

The thread that reads busctl output is left to end when the pipe closes. A busctl that answered but left a process holding its stdout reads as slow, and every poll of such a bus can leave one blocked reader behind until that process lets go. A comment next to the thread says so. Comment only.

* Make Save as mesh a plain export (#2595)

Save as mesh asked for the bodies and the format, and could also send the file to a slicer with a checkbox and a slicer list. Sending now has its own command, so the checkbox, the list and the Send label are gone from this dialog: bodies, format, a file dialog, Save. The two settings that only the checkbox used, save_mesh_send and save_mesh_slicer, are no longer kept; a settings file that still has them loads, and they are ignored. The strings only they used are gone from the catalogs. The slicer list stays in the dialog of Open in Slicer. file.save_mesh keeps its slicer parameter for scripts. The guide describes the two as separate.

* Rename Open in Slicer to Send to Slicer (#2595)

The command sends a file to a slicer rather than opening one, and a later Send to App can share the name. File menu, Mesh tab, right-click menus, the dialog button, status lines, the guide and the English, Japanese and Chinese strings now say Send to Slicer, and the command id file.open_in_slicer is file.send_to_slicer. It is new in this change, so there is no alias. The remembered slicer is stored as send_slicer, and the question the agent chat asks says send to. Module and type names stay as they are.

* Put the send targets in one table and one send pipeline (#2595)

The known slicers, the list of slicers with a single-instance flag and the rule for slicers that must be started and waited for were three separate things. They are one table of targets now: id, label, kind, names and program files, accepted formats and the default, how the file is handed over, the single-instance flag, the version from which PrusaSlicer's on-url flag hands a file over, and the wait-for-ready rule. Programs that are not in the table are slicers with the same defaults. The kind is slicer, the only one so far; its comment says it is where a later Send to App would plug in. The send itself is one function: write the bodies, find the target, start it and wait if its rule says so, hand the file over, report. Detection and resolution take a kind. Nothing changes for what already worked.

file.save_mesh keeps its slicer parameter, now through the same function, with its export arguments and result unchanged: a cold PrusaSlicer 3 is started and waited for before the file goes, and it accepts the program path of a detected slicer as file.slicers lists it (file.slicers gives it as program). A path is accepted only when it is the program of exactly one detected target, and that target's own command and arguments run; a launcher several entries share, such as /usr/bin/flatpak, is refused as ambiguous, and any path nobody listed or chose is refused. The parameter and the code say it may be deprecated later in favour of file.send_to_slicer or a Send to App workflow, which is a possibility and not a plan.

Tests go through file.save_mesh itself for the two reported failures, a listed AppImage path and a cold PrusaSlicer 3 that is waited for, with the slicers and the busctl made up; and they check that the result and the file are what an export without a slicer gives, and that a path that is not listed, or is shared by two entries, writes nothing. The pipeline has its own tests: a cold launcher waited for, one already up, wait return, and one that never comes up. A test of save_mesh that shared a file name with another is given its own.

* Keep an AppImage's id through an upgrade (#2595)

When a slicer has several installs, each gets an id made from where it was found. For an AppImage that was its file name, which carries the version, so upgrading it changed the id and the remembered choice missed. The id is now made of the slicer's id, the fact that it is an AppImage and a short hash of its folder, so a new version that replaces the old one in the same folder keeps the id, and the same AppImage in another folder is its own install. Two versions kept side by side in one folder are two installs: while both are there, their file names are added to their ids to tell them apart.

A remembered id is found again only when it names exactly one install. An id that was one AppImage and is now two versions, or a plain id that is now several installs, is treated as not remembered, so the picker starts from the first entry as on a first run and does not quietly pick another install; a single install left of the same slicer is still found, as before. Installs that are not AppImages are told apart as before. An id from before this change no longer matches. Tests cover an upgrade, two versions side by side, a second folder, and the picker's side of each case.

* Add Open with EasyPrint to Send to Slicer

EasyPrint is Printables' slicer in the browser. It's a plain text row in
the Send to Slicer dialog, backed by a new file.open_in_easyprint
command. The command exports the bodies as a 3MF (or STL), hands them to
the host to upload to slicer.printables.com/import, and the app opens the
link that comes back. The desktop app uploads with ureq and the browser
build with fetch, so this is the one send target that works on the web.

The model leaves the machine, so the command refuses without
consent: true, the dialog asks once and remembers, and an AI agent's
request asks first. A model over 100 MB is refused before anything is
sent, and a failed upload shows as an error with the reason.

The chat's privacy note said SolidCraft sends nothing anywhere, which
isn't true any more, so it now says that about the chat. New strings are
in every catalog.

* Place Send to Slicer on the Insert Files panel
2026-10-26 19:59:35 -04:00
MAKAO 30f951ecf9 Navigation bridge: a device's own app moves the view (#6094)
A homemade 3D input device's driver app (MAKMOUSE) listens on a loopback
port; with Preferences > Navigation > "Navigate with a device app on this
computer" on (off by default), the desktop app connects, says hello and
reads JSON lines: axis motion (orbit, pan or zoom by mode), zoom steps and
standard views. The motion goes through navigation::device like a 3D
mouse's, only in the focused window; a HID device the app names is left
to it. Documented in docs/3d-mouse.md.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 22:14:52 +00:00
raykholo c264c7a42a Startup falls back from a Direct3D 12 that can't build the UI pipeline (#6648) (#6682) 2026-10-26 10:44:13 +00:00
Jesper We 0c4eb458df macOS 3D mouse: unregister from the driver when the app ends, so the next launch gets the mouse (#6114) (#6115)
* claim: #6114

* macOS 3D mouse: unregister from the driver when the app ends, so the next launch gets the mouse (#6114)
2026-10-26 10:42:25 +00:00
raykholo 36a60a70d9 Graphics: 1x anti-aliasing where the multisampled view draws nothing (#5819, #5870) (#5832) 2026-10-25 22:10:04 +00:00
raykholo 0344a41dc4 Open and insert a DXF outside a sketch (#2052) (#4635) 2026-10-25 21:03:31 +00:00
raykholo b1da434458 Graphics: choose the graphics card, honour WGPU_ADAPTER_NAME (#5986) (#6010) 2026-10-25 16:49:57 +00:00
bherbruck 093571cfe4 Connect AI apps at start-up, with a preference to turn it off (#6388)
At launch the app adds the solidcraft entry to each installed AI client off the window thread,
names newly connected clients once, and refreshes a stale path. Settings > Assistant has
"Make SolidCraft available to AI apps on this computer" (on by default); off removes the entries it
added. Entries the user changed are left alone; automation runs never touch the files.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 13:51:55 +00:00
Colin Faulkingham 16a5254e97 Fix macOS fullscreen application-bar interaction (#3643) (#3690)
* claim: #3643

* fix: keep macOS fullscreen application bar clickable (#3643)

* test: load bundled fonts for fullscreen regression
2026-10-25 12:49:02 +00:00
raykholo cc1e654690 Warn when a design is open elsewhere or changed on disk (#5467) (#5468)
* claim: #5467

* Warn when a design is open elsewhere or changed on disk (#5467)

The desktop app keeps a lock file next to each open design
(.~<file>.lock: computer, user, version, opened and refreshed times),
refreshes it every minute and removes it on close; a lock not
refreshed for three minutes is stale and ignored. Opening a design
that another SolidCraft has open asks: Open Read-Only, Open Anyway or
Cancel. A read-only design saves only to another file.

A design remembers its file's size and modification time when it is
opened or saved. Save over a file another program or computer changed
since asks: Save a Copy (the default), Overwrite or Cancel.

Programmatic calls never ask: doc.open reports open_elsewhere and takes
read_only, and file.save over a changed file returns an error until it
is given overwrite: true. ui.documents answers both questions.
2026-10-25 03:34:20 +00:00
raykholo 138bb0261c Windows OpenGL: use the system title bar so the picture lines up with clicks (#2063) (#4403)
* claim: #2063

* Windows OpenGL: use the system title bar so the picture lines up with clicks (#2063)

On Windows with only OpenGL to start, the window opens with the system
title bar instead of using the application bar as its title bar. The
window without OS decorations keeps its caption style while having no
frame, and some OpenGL drivers (older Intel HD/UHD) show the picture a
caption's height lower than the window, so clicks land above what they
point at. Direct3D 12 and Vulkan keep the custom title bar.

The choice is made before the window opens, from the backends wgpu
starts, so the window never changes its frame while OpenGL draws into it.
2026-10-25 03:19:34 +00:00
bherbruck a150822d9b Put solidcraft-cli on PATH from the AppImage and the macOS app (#6347)
The AppImage writes a ~/.local/bin/solidcraft-cli launcher from its desktop-integration step
(same opt-outs, never over a file it did not write). The macOS app links the CLI into
/opt/homebrew/bin or /usr/local/bin at launch when one is writable, and Help > Install
solidcraft-cli command does it with an administrator prompt otherwise. Snap and Flatpak are documented.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:45:45 +00:00
ivisaf 765c5fd143 Pictures drawn off the window thread finish before the process exits (#6062) (#6063)
A Home picture still being drawn by the detached saved-thumbnail thread
could be on the GPU as the process exited, and the process died with
SIGSEGV inside the graphics driver. capture::close stops new pictures
and waits for those in flight (the app calls it in on_exit), and
dropping SolveApp waits for the Home picture threads it started.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:29:40 +00:00
Matthew Knutson 05d43d3542 Windows: the taskbar button shows the mark when the first frames are slow (#6391)
The taskbar asks a window for its icon once, when the window appears. eframe
sets the icon while the window is still hidden and shows it after the first
frame; when that frame is slow (safe mode's software renderer) or startup kept
the UI thread busy long enough for Windows to mark the window as not
responding (building the viewport pipelines), the request isn't answered in
time, the taskbar falls back to the window class's icon, and winit's class has
none: the button showed Windows' generic icon for as long as the window was
open.

Give the class the exe's embedded icon (resource 1) before the window is shown.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:24:26 +00:00
raykholo 4cd1a51f48 Assistant: a request timeout per endpoint for slow models (#5009) (#5010)
* claim: #5009

* Assistant: a request timeout per endpoint for slow models (#5009)

An OpenAI-compatible endpoint now stores how long one model request may
take (request_timeout_s, 300 s by default, clamped to 30 s ..= 1 h). It
is set in the Add agent dialog and in the endpoint's entry under Agents
(a running conversation uses a change from its next request), through
ui.agent_chat add_agent, and reported in the chat's state. A request
that runs out of time says the limit and where to raise it instead of
"timeout: global". The desktop HTTP cap goes from 900 s to an hour.

The tool-call timeout stays 330 s: it covers SolidCraft's own tool work
and the user's Allow, never the model.

* Assistant settings: line up an endpoint's Request timeout with Permissions

The label column of an agent's entry is wide enough for "Request timeout",
so the label isn't cut and both rows share one column.
2026-10-24 22:24:42 +00:00
Nathalie Schönwetter b702ce8c7d fix: start the window on Intel Macs without wgpu's indirect-call validation (#3024) (#4808)
Co-authored-by: Nathalie Schönwetter <nathalie@cfw-ag.ch>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-24 21:52:55 +00:00
selune 9e6e0b8df1 Render workspace: complete experimental ribbon, resources and effects integration (#5493) (#5494)
* wip(render): reconcile completed material and image pipeline source with 0.20 (#5493)

Source-only integration reference for staged review, not a merge-ready aggregate.
Donor: 0xlillith/solidcraft@aea20b0115.
Upstream: 858e5995d6.

Retain original CPU/material contracts and explicit GPU donor provenance in
docs/render-materials-lab.md (#2067, #2191, #2780, #3306). Preserve released
format migrations and current navigation/startup/shell behavior. New saved
records use pending descriptors. The physical-card descriptor follows the
maintainer's material-engineering-cards naming request, with a legacy-lab
format-29 regression. Replace raw new panel hosts with shared containers.

Repository checks, complete workspace/all-target Clippy, and the independent
physical/resource authoring checks pass for this source. The fresh full local
CI invocation has reached test compilation and is not yet complete. Do not
transfer donor native output or prior test totals to this integration.

Generated review screenshots, video, package ZIP and machine logs remain at
the immutable personal evidence pin. Uncommitted geometric displacement is
backed up separately, not silently included. No kernel/vendor change, direct
main write, release or independent contributor-branch rewrite.

Co-authored-by: Christian Svensson <blue@cmd.nu>

* test(cli): pin the Compact camera-sample admission diagnostic (#5493)

The bounded request still refuses 1024x1024x64 samples before host initialization and writes no output. Update only the stale expected diagnostic to the existing Compact budget wording; production limits and code are unchanged. Exact-tree CLI regression suite: 14 passed, 0 failed. The full repository gate has been invoked separately and is not yet complete.

* Normalize UI container violation paths across platforms

Report repository-relative paths with forward slashes so diagnostics and the existing nested-package regression assertions agree on Windows and Unix. Keep the container detection rules unchanged.

Validation: official ui-containers gate and all seven focused xtask tests passed; rustfmt and diff checks passed. Only xtask/dependencies were compiled; no application build or heavy tests.
(cherry picked from commit 44b58d8e103a5fbc816ebf7c22b8de768ddf592b)

* fix(render): preserve camera contracts and correct acceptance regressions (#5493)

Preserve Design view.apply semantics with a separate strict Render camera command. Retain existing translations when English-only aliases collide; add material-axis entries and camera-specific pitch labels. Compare complete validated engineering cards and retain job handles before cancellation.

Focused and native acceptance is pinned to tree f8a423b21febd80ba88aaf1a67d5edbe2306314a. Full CI has been invoked separately and is not claimed green. Landing follows the render integration policy in #5493.

* fix(render): resolve showcase licence and upstream resource hygiene (#5493)

Record SychPL's explicit MIT OR Apache-2.0 grant, retaining source/model bytes and the Ubuntu lettering notice. Remove 80 absent attribution rows, personal fork records, dead delivery attributes and three fork/resource-only workflows. Existing xtask assets now performs bounded offline hash checks and rejects orphan render attribution; no parallel draft CI or package installation. Original authoring reproduction remains explicit. Scoped xtask tests, assets, Clippy, formatting and prepared SELENE validation pass; no application or renderer-wide result is inferred.

* fix(render): align saved bounds and progressive sample resolution (#5493)

Address review r4364211669/r4364211677/r4364211681/r4364211691/r4364211695. Persisted light/frame domains respect the existing 1e9 document bound; related LED/rectangle/direction cases use the same bound. Workstation primary resolve shares the 4096 admission cap and film counters use checked conversions. Exact candidate: 485 CPU render tests, 21 render document tests and strict scoped Clippy pass, including positive boundary round trips and 2048/4096 end-to-end checkpoints. No released format/migration edits, relaxed test limits or full-stack acceptance claim.

* wip(render): isolate optional resources and harden sample handling (#5493)

Review work in progress: opt-in encoded render library with reproducible runtime catalog exports; native-only robust dependency through the workspace; checked bloom slices; per-sample point-light diagnostics; independent area-light spatial/film keys. Resource-module binaries in both configurations, generation, Cargo production feature graphs and attribution checks pass. Full engine/render regression and combined acceptance are pending: do not merge this donor as a constituent or treat scoped resource proof as runtime acceptance.

* fix(gpu): preserve donor allocations through the scope-safety repair (#5722)

Port the native-validated #5723 scope-cleanup correction into the experimental donor, retaining its adaptive, volume, aging, photographic and bloom allocations. Same reverse-drain helper and regression cases; the donor combination still needs its own compile/test gate and is not covered retroactively by render-base results.

* claim: #1369

* Reject unknown pending concepts after format folding (#1369)

* test(render): close bounded sampling and bloom review regressions (#5493)

Validate the optional-resource/lighting/dependency donor at its exact tree. Required Vulkan GPU 127/0/3; CPU renderer 487/0; engine Render 72/0; document render 21/0; lean library 7/0; strict scoped Clippy, assets/layers/lists/containers and lean-engine WASM pass. Preserve original failed controller/typing attempts. This is the draft donor/disposition source, not a replacement for constituent render PRs or final main acceptance.

* wip(render): preserve stable aging target validation candidate

Exact staged source from prior review work on donor 3b892eab5e10f4508fa50f15b202630d5adfa594. This is a recovery/review checkpoint, NOT accepted delivery. An actual command-path regression currently fails because the selected executor refuses ordered surface aging. No assertion, capability or admission limit is weakened. Native/UI/full combination acceptance remains pending. Saved/runtime split adds one pending descriptor and retains original file scope; no main/render branch is changed.

* test(render): preserve numeric setup intent at the admitted coordinate bound

Follow up jyviko review on #5494 without weakening the corrected saved-coordinate contract. The positive clicked fixture uses 1e9 instead of inadmissible 2e9; explicit out-of-range cases still refuse, and the full saved setup round-trips through JSON and the native container. Exact-source Render workspace 95/0 and strict all-target UI Clippy pass. This does not incorporate the separately failing stable-aging candidate or claim full current-render acceptance.

* test(render): use the real GPU executor for saved aging

Move successful native cold-reopen Check/Start coverage from the CPU-backed protocol fixture into the production GPU executor tests. Verify capture-index changes preserve the stable target and that enabling aging changes both PNG and raw EXR output. Retain explicit, allocation-free refusal coverage for executors without aging support. Production capabilities and admission checks are unchanged.

* fix(render): persist stable identities for targeted aging (#5493)

Separate saved RenderBodyTarget identities from captured mesh ordinals. Reject legacy ambiguous targets, resolve Check/Start after visibility changes and preserve native reopening, copies and undo. Unsupported executors still refuse; real AMD Vulkan regression completes saved aging after reordered capture.

Source tree 6b84c8ad passes document 23, engine Render 75, GPU effects 5 and Render UI 95 with no failures; scoped strict Clippy, WASM and repository gates pass. Fresh CLI/native reopen and clean/aged GPU exports pass with identical physical totals and inspected actual images. Whole current-render integration is separate.

* fix(render): reconcile combined CPU/GPU contracts on current upstream

Unify captured resources/status and CPU-vs-GPU request schemas after the real two-parent integration; remove obsolete duplicate Vulkan selector and retain combined platform-filter regression. Deduplicate only identical or superseded test definitions, retaining the stronger card metadata and reserved-executor assertions. No assertions, admission limits or feature refusals are weakened.

All targets of render dependencies, GPU, engine, UI, CLI and native app pass cargo check with raytrace-cpu and bundled-render-library at tree c70d00d1. Native executable tests and full current-source acceptance remain pending. This is a private integration rehearsal for subsequent constituent PRs, not an aggregate official render/main merge.

* test(render): retain one complete host lifetime regression set

Deduplicate byte-identical DropProbe/task-lifetime tests and retain the adapted environment/texture ownership regressions with every assertion and complete memory estimate. Keep the registered-geometry admission regression once; only struct field order differed. Replace a one-element diagnostic loop with its equivalent block, preserving all wrap/width assertions.

Test-only integration repair. Formatting and diff checks pass; refreshed executable validation is required. No production behavior, limits, assertions or ignores changed.

* fix(doc): recognize the proven format-29 card descriptor alias

Normalize only the historical format-29 physical-material-cards spelling, and only when material-engineering-cards is registered. Admission and migration de-duplication use the same identity. Unknown concepts, wrong versions and incapable readers still refuse before mutation. Six controlled-history Rust regressions and actual CLI migration/no-clobber acceptance pass. No version, released migration or CI changes. Refs #5793, #1369, #5493.

* test(render): preserve grounding refusal before explicit instance moves

Update the two Render binding fixtures for upstream first-occurrence grounding. Verify grounded movement refuses without changing document/history, then explicitly unground through the public command before the intended move. Retain every target, resource, copy and persistence assertion. Refs #5493.

---------

Co-authored-by: Christian Svensson <blue@cmd.nu>
Co-authored-by: Victor Santos Oliveira <56417388+Vittuu@users.noreply.github.com>
Co-authored-by: cfaulkingham <colin.faulkingham@gmail.com>
2026-10-24 14:21:59 +00:00
fugazister a633a67e63 Preferences: choose the window system on Linux (Wayland or X11) (#3083) (#3084)
* claim: #3083

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* WIP: choose the window system on Linux in Preferences (#3083)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Preferences: a window system set over the control channel is saved for the next start again

The merge kept main's check in ui.prefs, which only looked at the anti-aliasing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Preferences: the window system section drops the restart badge its note already states

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-24 12:12:38 +00:00
The Nomad 1f6a2d4daf 3D mouse: driver choice, guided calibration, button mapping and a picture of the device (#1463) (#3825)
* Add a small test boat to steer around with the 3D mouse

A little hull in its own camera, drawn by the UI itself and not the CAD
viewport, so a 3D mouse can be tried out without opening a design. It
brings the model (generated by assets/models/make_test_boat.py) and the
tests for how the camera moves it.

Nothing uses it yet; Preferences picks it up with the rest of the 3D mouse
work.

* UI kit: keep a choice row from flipping with the scrollbar

A choice row picks segments or a dropdown by whether its labels fit. A page
scrollbar that comes and goes narrows the row by its own width, so the row
could flip back and forth between the two on a page that sits right at the
edge. It is now judged on the whole row and through a small helper,
fits_steadily, that only changes its answer once the miss is wider than the
scrollbar.

Also tests for that, for typed numbers in a slider's value box, and a
test hook to put up the issue-report input barrier by hand.

* 3D mouse: device model, guided calibration, buttons and a picture

The 3D mouse becomes a device we know something about instead of six raw
numbers.

The reader picks between spacenavd and the direct hidraw driver, falls back
from one to the other, and says so when it can't open the device. Guided
calibration asks whether the device is a spring cap or a trackball, adds a
touch step, and uses a settle filter so a ball let go of stops reading as
motion. Buttons get jobs (keys, held modifiers, commands), saved per
device, with defaults for the SpaceMouse Pro.

Preferences gets a picture of the device that moves as it does, next to the
test boat, and the same picture can sit in the 3D view at Left Viewport,
Right Viewport or Left Window, above the floating History card like the
legend and readouts.

These ride together because the crate's calibration types, the Preferences
page, the Linux reader and the button hook all use each other.

* 3D mouse: offer to calibrate an uncalibrated device

When a 3D mouse shows up that has not been calibrated, a card in the 3D
view offers to calibrate it, to swap drivers when the other one would work
better, to close, or to never ask again. It is made once per device, goes
away after 30 seconds in view, and gives way to a status or computing
toast instead of stacking on it.

The card is the shared toast, which now takes buttons: they group by
purpose, wrap inside the card at narrow widths, and do nothing while an
issue report holds CAD input. The picture of the device in the 3D view
keeps clear of the card.

* 3D mouse: translations and attribution

The 3D mouse strings (ui.3d_mouse_*, the calibration steps and the offer
card) in every shipped language, the Japanese catalog note, and the credit
for the test boat model in ATTRIBUTION.md.

This is last because the code before it only looks keys up: it builds and
runs without these, falling back to English until they land.

* 3D mouse: draw its preferences with the settings kit like the rest of Navigation

The 3D mouse section was a folded header with its own layout. It now
uses the same kit as the sections above it: a settings_section card,
settings_form rows with the shared label column, dividers between the
device, axes, picture and buttons groups, Text::Hint for the helper
lines, and settings_control_width for the dropdowns.

The section is open like every other one (the header still folds it),
so the device badge on the folded header is gone; the calibration row
already names the device. Every setting, string and key is unchanged.
Tests that unfolded the section no longer click it, and the hint lines
are looked up as hints instead of notes.

* 3D mouse: show each axis's live tilt in Preferences, like main's axis rows

Each view axis row is main's axis row again: a meter that follows the tilt of the motion driving it, with the dead zone marked, next to Invert, Speed and the "driven by" menu. The meter reads the calibrated travel when the device has a calibration and the raw reading over full scale when it does not, and asks for a frame whenever the reading changes. The helpers are back as they are on main, and the calibration state is a badge by the enable toggle.

* 3D mouse: line its preferences up with the rest of Navigation

- The two checkboxes sit side by side in the same two-column grid as Wheel and trackpad.
- Row labels stop repeating "3D mouse" and use sentence case: Calibration, Driver, Restore defaults, Reset view, Left viewport, Right viewport, Left window.
- Hints line up under the control column instead of the left edge.
- The six view axes are named Pan X, Pan Y, Zoom, Orbit X, Orbit Y and Roll so they fit the name column.
- Buttons are a divider and rows in a form like the other groups, without the bold sub-heading.
- The driver, dead zone, axes, picture and buttons sit behind a collapsed Advanced section, since most people never touch them.

* 3D mouse: tidy the Advanced test for clippy
2026-10-24 03:34:21 +00:00
bherbruck 98c4f335e8 Control channel and MCP on by default, with a setting to turn it off (#5561)
The app opens its localhost control channel on port 27878 (or the next free
one) unless Preferences > Assistant turns it off; --control and
SOLIDCRAFT_CONTROL_PORT still win. A current.port discovery file lets
solidcraft-cli mcp find the running app with no arguments.

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-23 16:00:35 +00:00
Peppe Bergqvist fdde3f9da9 Add macOS native menu bar (#2361) (#4531)
* claim: #2361

Co-Authored-By: GitHub Copilot <noreply@github.com>

* feat: add native macOS menu bar (#2361)

Reuse document actions and unsaved quit handling in native application, File, Edit, Window and Help menus. Replace duplicate header controls only when native installation succeeds, preserving other platforms and the fallback UI.

Co-Authored-By: GitHub Copilot <noreply@github.com>

---------

Co-authored-by: GitHub Copilot <noreply@github.com>
2026-10-23 13:45:31 +00:00
bherbruck b31fddb98e OpenGL: the viewport scene renders 1x again, like the window (#5605)
#5187 gave the scene its own offscreen target with the app's sample count,
which skipped the OpenGL clamp to 1x from 6dd202d. The scene's count now
goes through effective_msaa_samples as well.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 13:37:27 -04:00
Jackson Oursland 5962f56f87 Viewport: reuse still pictures and draw scenes into a 1x window pass (#4820) (#5187)
* Viewport: show the picture it drew last when nothing changed (#4820)

A frame redrew the whole scene whenever egui asked for a frame, even when
the camera, scene, highlight and overlays were identical: pointer moves over
empty space and UI animations over a still view paid for the full scene.

The renderer now hashes everything the picture depends on (scene keys,
camera, size, section, images, analysis, accessibility map, occlusion) and
blits the last offscreen picture when the hash matches. The first still
frame filters a supersampled picture down once and later frames copy it as
it is. A frame with the same content costs a blit instead of a scene draw.

Co-Authored-By: Claude Code <noreply@anthropic.com>

* Viewport: draw the scene offscreen, into a 1x window pass (#4820)

The scene keeps the app's depth, stencil and MSAA, but egui's window pass now
has one sample and no depth. Whenever the two targets differ, the scene
(product previews too) is drawn offscreen and blitted, so the UI pass no
longer clears and resolves a multisampled window.

Over 8 s of pointer moves on the 450E rotor head, the app's GPU intervals fell
from 1325 ms to 1006 ms and egui_render from 892 ms to 509 ms; idle stays at
0%. A GPU test checks the split path's picture matches the direct one.

Co-Authored-By: Claude Code <noreply@anthropic.com>

* 3D mouse: a repeated report at rest asks for no frame (#4820)

A device may repeat its latest report while the cap rests. Publishing it
again asked egui for a frame although nothing changed. Only a report that
changes the reading now asks for one; while the cap moves, the view asks for
the next frame itself.

Co-Authored-By: Claude Code <noreply@anthropic.com>

---------

Co-authored-by: Claude Code <noreply@anthropic.com>
2026-10-23 13:42:47 +00:00
William Dunn 17f0d6bc68 Format registry: one table of formats, extensions and options (#5215) (#5217)
* Add the format registry: one table of formats, extensions and options in crates/io.

The hosts' Open-dialog filters and the web accept list derive from it, and
registry tests pin it to the path predicates and the command docs.

* Fix format-registry tests that compared FormatSpec without Eq.

assert_eq on Option<&FormatSpec> does not compile; the none cases
only need is_none, matching the other rows that compare ids.
2026-10-23 13:42:40 +00:00
raykholo 92d3a2fde5 GPU: a lost device stops drawing instead of crashing (#4172) (#4229)
* claim: #4172

* GPU: a lost device stops drawing instead of crashing (#4172)

After the driver resets the GPU (Windows TDR), the first queue write to meet the
lost device panicked inside wgpu-core (PendingWrites::activate unwrapping
DeviceError::Lost). Nothing watched the device for its loss.

- egui-wgpu: RenderState::device_lost (DeviceLost) is set by the device's lost
  callback. The painter draws nothing on a lost device, and before a frame's
  uploads it submits nothing (DeviceLost::probe), so a loss the driver reports
  is found by that submission instead of the first write.
- Pictures (thumbnails of saves, ui.render) watch the same flag: on a lost
  device the capturer refuses with GpuError::DeviceLost without touching it,
  and the picture comes from the CPU rasterizer. Headless capturers watch
  their own devices.
- The app, seeing the loss, closes keeping unsaved changes for recovery (as a
  forced quit does) and starts again; the new start says what happened. A
  second loss within ten minutes starts on the software renderer. The loss is
  noted in the crash journal.
2026-10-23 02:19:35 +00:00
bherbruck e570c0b4eb Windows: a restored window that is out of reach is fitted to the monitor's work area (#4299)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 09:36:36 -04:00
bherbruck 463cea0615 Windows: ask for the foreground once, when the first frame is on screen (#4284)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 09:17:10 -04:00
bherbruck 0225e4d2a5 Startup: the first frame no longer waits for the system CJK/Hangul/Thai font search; SOLIDCRAFT_PROFILE_STARTUP prints startup steps (#4283)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 09:17:02 -04:00
bherbruck 6e22e3709d Web: reopen designs saved on the computer from the recent list after a reload; forget stale remembered files (#104) (#3834) 2026-10-20 17:32:36 -04:00
bherbruck b2168435ba Web: save to and open from files on your computer (#104) (#3681)
Save As and Open use the browser's file dialogs where the File System Access API exists; Save writes back to the same file, its handle kept in IndexedDB across reloads. File > Download design added. Other browsers keep storing designs in OPFS.
2026-10-20 13:39:55 -04:00
bherbruck 9e7a7b260b perf: Save and Save As write on a worker thread (#3044) (#3146)
Save ran on the window's thread: about 130 ms on the Prusa Core One design,
and more than a second once saves keep the evaluated model. The toolbar's
Save and Save As now run the command on a scratch copy of the session on a
worker; the design waits for it as it waits for a file picker (commands are
refused meanwhile), and the outcome is taken up as running the command here
would have left it: the name and links the save gave the design, its file,
its saved state (`Session::adopt_save`), the echo, the error status, the
recent files and the home thumbnail. A tab closing or the app quitting after
Save waits for the write, as does the app's exit. Scripts, the control
channel and the browser build still save in place.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 00:19:29 +00:00
bherbruck dc27988bc2 Agent chat: PDFs as documents, any other file by reference (#2812) (#2858)
A PDF goes whole to agents that take embedded documents; to the others, or past 12 MB, the message names it with its type, size and place. Any file that is not a picture, text or CAD file is attached by reference instead of refused. Chips show the type's extension; the file dialog offers All files.
2026-10-19 00:02:29 -04:00
franco michetti a4edea9ad2 Agent chat: attach files and pictures to a message (#1744)
Thanks @onembyte.
2026-10-18 08:18:29 -04:00
Mikalai Kukhta 180e62c981 Macos space mouse support (#1815)
Thanks @NecroKote.
2026-10-17 18:15:15 -04:00
Mateusz Sych c599238653 Insert SVG: the file picker opens on SVG files (#1801) (#1827)
* claim: #1801

* Insert SVG: the file picker opens on SVG files (#1801)

Every Open went through one host picker whose filters start with designs, CAD
files and meshes, so Insert SVG (and Insert DXF) in a sketch opened on STEP,
IGES and meshes, and the SVG file had to be found under another filter.

The host's pick_open now takes the extensions the command reads and offers
them as the picker's first, default filter. Insert SVG and Insert DXF pass
their type; every other Open passes none and keeps the list it had. The
browser host ignores them (it shows its own file panel).

---------

Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
2026-10-17 00:27:11 +00:00
CamWight c5f3515073 Viewport: hidden edges no longer show through faces, and thin or coplanar faces stop z-fighting (#1434, #1739) (#1768)
Thanks @CamWight.
2026-10-16 16:26:19 -04:00
bherbruck 201e055259 Windows relaunches after an update (#1748)
After the MSI installer finishes, wait for msiexec and start the installed exe; relaunch is detached on Windows.
2026-10-16 10:40:58 -04:00