A held solve applying a constraint, or the edit's own solve, could find a far
solution of the constraints and move points millions of millimetres while
the sketch said solved. Such a result now counts as a failed one: the next
held solve is tried, or the edit is refused.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7828
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: hold horizontal/vertical and line up with other points at once while drawing (#7828)
While drawing, the pointer lines up horizontally with the nearest sketch
point level with it and vertically with the nearest one plumb with it, at
the same time, as a dragged point already does; holding H/V with the
previous point still lines up across with another point. Dotted guides run
from the points lined up with (H, V or H+V), and the click adds a
Horizontal or Vertical constraint with each, in the shape's undo step,
unless the sketch already has it.
A click takes the tool out of the app while it runs, so refine_snap
treated every tool as the Line tool then: a rectangle's click could take a
line-extension inference its hover never showed. The tool's points and
kind are kept from the last hover, as the previous point was.
Preferences > Sketch > "Line up with other sketch points while drawing"
(sketch_align_points) turns it off for the old behaviour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: lining up with other points is off unless turned on
Review on #8474: sketch_align_points defaults to off, so nothing changes for anyone who
doesn't turn it on. With it off, a click also treats the tool as before (the Line tool's
inferences), instead of keeping the tool's kind from the hover.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8570
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert Design: pick one of the other open designs, or browse for a file (#8570)
With other designs open in tabs, Insert Design first lists them under the
button: one click inserts a saved one as a linked component; one with
unsaved changes inserts its saved file and the status line says so; one
never saved is greyed out, as there is no file to link. Browse... opens
the file picker, as the button did before, and it still goes straight
there with no other design open.
Preferences > Design > Linked designs > "Insert Design lists the designs
open in other tabs first" (insert_lists_open_designs) turns the list off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert Design list: sit with the other menus' items, so run_item keeps its doc comment
Review on #8571: insert_design_items had landed between run_item and its comment. The
rebased menu-walk list keeps main's Target::HistoryControls beside Target::InsertDesign.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8100
* History: say why an edited feature behind the marker changes nothing (#8100)
Editing a feature that sits after the history marker (double-clicking its
greyed-out item) rolls back to it, previews the change, and on OK puts the
marker back where it was: the feature stays rolled back, so nothing in the
view changes and nothing says why. That is the silent "pattern of a cut
does nothing" in #8100 (the reporter's design has its pattern behind the
marker; on main the pattern itself builds fine once rolled forward).
- timeline.redefine replies `rolled_back` and, when true, a `note`; it also
carries the feature's `warning` (for a rolled-back feature, the one its
constructor met building it at its place).
- The window shows that note in the status line after such an edit.
- A rolled-back item's tooltip in both History layouts says it is after
the history marker and not built.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pending locale: Arabic, Hebrew, Japanese, Vietnamese and Chinese for the rolled-back notes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #8639
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch profiles: close the joints near-coincident curves leave open (#8639)
Two free-form curves that lie on each other along a stretch (a DXF that
carries an outline twice, with the same straight sides and different
corners) are cut into sampled pieces whose ends the graph joins into one
node within 1e-4 mm, but the pieces keep their own ends, a few millionths
apart. Only analytic edges were closed at those joints, so the sliver
loops between the two curves stayed open by up to 1e-5 mm, more than the
1e-6 a solid needs. The region around them took those loops as holes:
extruding it failed with "profile loop is not closed" and it drew no
fill when picked, so it looked unselectable.
Close a line's joint in each finished loop: line to line at their middle,
a line onto any other segment's end. On the reporter's DXF the band
between the outer two rings now extrudes (110.5 mm2 by 2 mm = 220.9 mm3),
and the zero-area slivers no longer form profiles (221 -> 216).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8863
* Sketch: the status line after a dimension is in the interface language (#8863)
The Dimension tool built its "Dimension applied" status sentences (new
parameter, renamed parameter, plain value) and the driven-dimension note
with English format! strings, so they stayed English under a translated UI.
They now come from the catalog (one pending locale file: en, ar, de, he,
ja, ko, pl, vi, zh), with the typed parameter name passed in as is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8861
* History: Delete on a selected feature deletes the selection in both timelines (#8861)
With several features selected, Delete in a selected feature's menu deleted
the whole selection in the bottom timeline and only that feature in the
history beside the browser, which offered the selection as a separate
Delete Selected Features… entry.
Both menus now use one Delete entry: the selected features when the
right-clicked one is among them, labelled "Delete N Selected Features",
else that feature alone. The history beside the browser no longer adds its
own Delete Selected Features… to a selected feature's menu, since the entry
above covers it; folder menus keep it. The single-feature delete helper had
no callers left and is removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* History: a feature's menu leaves out Delete Selected Features… by a flag (#8861)
A right-click on a feature outside the selection selects that feature
first, so in a feature's menu the clicked feature is always selected. A
flag that says the menu is a feature's says the same without the lookup.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8006
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Parts library: button head cap screws, ISO 7380-1 (#8006)
Insert Part offered the socket head cap screw but no button head, so a
design using button heads had to stand in a cap screw and accept the
wrong head. A button_head_cap_screw family now sits beside it, taking
the same parameters from the ISO 7380-1 table over M3 to M16.
The head is a new Head::Dome: the shank and the head revolve as one
outline, with the rim at dk, a short cylindrical flank, the arc of the
crown, and a flat top around the socket, so the hex socket stays a plain
cut on a plane. The standard draws the flank and the flat but dimensions
neither; they are 0.15 k and 0.7 s, and the comment on those constants
records what that costs against the standard's crown radius r1 and why
neither other fractions nor r1 taken as given does better. dk, k, s and
t are exact, each checked against three reproductions of the table.
Insert Part, Change Part Size and the bill of materials need no change:
they read the families and their table rows from parts.library.
The wider fastener request is issue 7692; this is only the one family
from it, and leaves the rest of that list open.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Parts: format after the rebase
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pending locale: the Button head cap screw family name
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Components: copy and paste bodies and components between designs and components (#3390)
Squashed for the rebase onto main.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3511
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Paste New: copy from a design other than the one pasted into
`component_clone::paste` read the design it copies from through the session it pastes into.
`build` now takes the source (document, evaluated model, unapplied moves) apart from the
target session; Paste New within one design passes the session as both, as before. Names are
numbered against the target's names.
From another design (`Source::copied`, a `ForeignCopy` snapshot taken at copy time):
- names are kept where the target doesn't have them, else numbered;
- the user parameters the copy uses come along, `w_2` where the target has a `w`, with the
copied expressions following;
- a copy whose features use what isn't in it (bodies, sketches, faces, parameters outside it)
is refused with a list of what; `FeatureKind::input_bodies` lists the bodies a feature uses;
- configurations stay with their design, and the target's timeline marker must be at the end;
- a body moved in from outside comes as an imported base named `BodyImport1`.
Body transfers are pointed at the copy's components before they are added: `add_feature`
checks that the components they name exist, which another design's don't.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Engine: paste bodies and components copied in another design
`component.paste_from_design` pastes what `Session::foreign_copy` holds, at the same world
coordinates as in its design, into the active component or `component` (placed by
`component_path`; a component placed more than once gets it in every instance), as one step
to undo:
- bodies as imported bodies, without their history, in one Import feature (named as any
import is, "Import1"); a body seen in another placement ("Cube (B:2)") pastes as "Cube";
names the target has are numbered;
- components as independent copies (Paste New from the snapshot): with their history,
appearances, materials, joints and motion inside them; joints to the outside stay behind.
Tests: bodies (position, naming, target component, undo; a body of another placement) and
components (history, appearances, a part placed twice, editing independently, save and reopen,
undo; user parameters renamed; refused when using a body outside it; bodies moved in).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Clipboard: copy in one design, paste in another
Copying or cutting bodies or components also keeps a snapshot of them (`ForeignCopy`); another
tab pastes it with `component.paste_from_design`: bodies as imported bodies, components as
independent copies (Paste and Paste New alike), folded and selected. Cut pastes as a copy
there, the original staying; Esc on the cut leaves nothing to paste anywhere.
The last copy in any design is what pastes: each copy or cut is numbered, and a tab whose own
copy is older empties its clipboard when it is switched to (`drop_stale`). A failed copy
anywhere leaves nothing to paste in any tab.
Tests: bodies and components pasted in another tab, the last copy winning across tabs, cut
as a copy. `copied_bodies_stay_with_their_design` gave way to the cross-design test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Clipboard: what is selected wins over a design row picked earlier
Copy copied the whole design as a linked component whenever the design's
browser row was still picked, even after a component, body or feature had
been selected in the view or another tab, and failed in an unsaved design.
The design row now gives way to anything selected, and switching tabs
drops the picked components of the design left.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Put the Paste from Another Design label in the pending locale file
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: unground the placement before moving it (a design's first part is grounded)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drop locale keys main already folded into en.json
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pending locale: Paste from Another Design in the complete catalogs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #7409
* Keyboard Shortcuts: the read-only list says so and leads to the editable page (#7409)
Home › Keyboard shortcuts and Help › Keyboard Shortcuts open the
Shortcuts page read-only, in the Preferences window with its sidebar and
Cancel/Apply/OK, so it looked exactly like Settings › Shortcuts with
Import…, Reset All and recording missing. The read-only page now says
"Read-only list: shortcuts can't be changed here." and has an "Edit
shortcuts" button that turns the same page into the editable one.
Strings in assets/locales/pending/shortcuts-read-only-note.json (en, ja,
zh). Harness test opens it both ways, checks the note, clicks Edit
shortcuts, and finds Import…, Reset All and a recordable binding.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pending locale: Arabic, Hebrew and Vietnamese for the read-only shortcuts note
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #8864
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport: with Orbit, Pan or Zoom lit, a press held still keeps the highlight under it (#8864)
A mode lit in the navigation bar, or a held Space, owns drags, not a still
press (#8438), but the hover pick counted any left press under such a mode
as navigation and dropped the highlight, so the line under a Select Other
hold went dark until the list opened. Only a preset's left-button binding
or Ctrl+left orbit navigates from the press on now; a lit mode's drag
still drops the highlight once it starts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Sketch Intersect: add Faces/Bodies and Projection Link options (#1110)
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Sketch Project: add Geometry/Bodies and Projection Link options (#1110)
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Sketch Project/Intersect: keep exact lines and arcs of whole bodies, no noisy rebuild warning (#1110)
Whole-body silhouettes and sections fit lines and arcs tightly and snap arcs
tangent to their neighbours. A rebuilt projection warns only when it removed
the user's own constraints or curves. Pending locales cover ar, he and vi, and
the preselection tests use the direct-pick workflow.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Select Other: label curves from Intersect as intersected (#1110)
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
---------
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* claim: #8692
* Browser: remember the folded card across runs, optional reveal on hover (#8692)
The browser card's fold (the chevron in its header) is now a preference,
saved with the other layout state, so the next run starts the way the user
left it. Preferences > Interface > Layout adds Shown / Reveal on hover: the
browser then stays out of sight until the pointer comes over its place or
the thin tab at its left edge, fading in like the navigation bar's Hide
until hovered, and stays while the pointer is inside or a menu, drag or text
edit started from it is open. It never folds in that mode.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: move the reveal-on-hover messages to a pending locale file (#8692)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8306
* Timeline: joints in feature folders (#8306)
timeline.group and timeline.move_to_group take joints as well as features, so
hundreds of joints fold into one folder tile. A closed folder shows one tile
whatever it holds; opening it shows its features and joints in both the bottom
and left History. Suppress, delete and ungroup on a folder reach its joints too
(one undo step), deleting a joint removes it from its folder, and an unknown
joint id or name is an error. Saved with the design; designs without joint
folders read and write as before.
* claim: #8862
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Expressions: Enter after `pi mm` keeps the unit, not a longer name (#8862)
A unit after a name or constant multiplies it, as after a number (`pi mm`
is pi millimetres), so it is a complete word there: the longer names are
listed unarmed and Enter submits what was typed. A unit at the start, or
after an operator or bracket, stays a prefix as #3664 chose.
Whether Enter completes is now worked out again every frame, unless a key
armed the list. It was kept from when the list first appeared for a word
and caret position, so it went stale when the text before the word was
replaced, or when the box took the focus before the names were gathered.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #7023
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Status bar: switch the mouse mapping from a menu (#7023)
The status bar gets a mouse-mapping button beside the units. It shows the
current mapping, and a click opens a menu of the mappings above the bar.
Picking one sets what Preferences > Navigation sets for it (bindings, wheel
direction, middle double-click, right drag orbits) through
choose_nav_preset. Nothing changes while the status bar is off (the
default).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4176
* Preferences: mouse-wheel zoom speed (#4176)
A 0.25x to 4x multiplier for each wheel zoom step, applied in
navigation::handle so every canvas uses it. The 3D mouse keeps its own
speed. Values outside the range are refused when set and reset to 1x when
loaded.
* Control protocol: wheel_zoom_speed in the sorted ui.prefs list (#4176)
* Wheel zoom speed: its label in the complete catalogs (#4176)
* claim: #8040
* wip: 3D line/spline/point tools (#8040)
* Take sketch.move3d off the toolbar help backlog now that it is agent-only (#8040)
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: #8794
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* Control token: a closing window removes only its own token and discovery files (#8794)
Under Flatpak each instance has its own loopback, so a second window
binds the same port number as the first and writes the same
<port>.token, <port>.pid and current.port in the shared data folder.
At exit the first window deleted them all, unconditionally, leaving the
second window running with no token file a client could read.
remove_token_file now takes this launch's token and removes the token
and process files only while the file still holds it; the process id
can't tell instances apart, as every Flatpak instance has the same one.
remove_current_port also takes the token and keeps the discovery file
while another launch's token file holds that port, and removes
current.pid with current.port (it was left behind).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #8835
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a selected text moves when dragged from anywhere inside its frame (#8835)
A drag had to start on one of the text's letters to move it. From the
space between letters, or inside a letter's outline, it found no geometry
and drew a selection box instead.
Off the sketch's own geometry, a drag from inside the selected text's
frame now grabs the text, as one from a letter does. Handles, dimensions
and geometry under the pointer still come first, and outside the frame a
drag from empty space still draws a selection box.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Trackpad: zoom with two-finger scroll while holding a key, chosen in Preferences (#8322)
Holding the zoom key turns a vertical two-finger scroll (or a wheel) into zoom at
the pointer, with the wheel zoom's speed, direction and anchor, so a laptop user
zooms without pinching. Preferences > Navigation > "Zoom with two-finger scroll
while holding": Cmd on macOS and Ctrl elsewhere (default), Option/Alt, Ctrl, or
Off. That key with the scroll did nothing before, so no default changes; Off
keeps it that way. Shift keeps its orbit.
* Trackpad zoom modifier: off by default (#8322)
Scroll keeps its usual meaning until a key is chosen in Navigation.
* Trackpad zoom modifier tests: Off is the default; tests that zoom choose Cmd (#8322)
* Trackpad zoom modifier: zoom once alongside the Ctrl+wheel pinch from #8539 (#8322)
A wheel the chosen key claims is no longer also read as a pinch, and a key that is not
chosen keeps main's pinch handling unchanged.
Align gets an Object Type row (Bodies | Components). In Components mode it runs the new
occurrence.align command, which moves only the chosen occurrence placements (their
transforms) instead of adding an Align feature to the shared component, so other instances
stay where they are.
- occurrence.align: from/to points, snaps, planar faces and planes in world coordinates,
flip, capture/pending, grounded and rigid-group refusals as occurrence.move.
- A viewport or browser-body pick takes the placement directly under the active component.
- A placement inside a subassembly placed more than once still moves (as occurrence.move
does) but the dialog warns, and the reply lists it under shared.
corner_free looked only in a fixed column at the view's right edge and took
the largest free rect there by area. Next to a tall dialog docked at the
right edge, or the Assistant in the Floating layout, the narrow strip beside
the pane won: the toasts were squeezed into it, their text broke inside
words, and with a wider pane they were not shown at all.
It now tries that column first and then columns ending at each obstacle's
left edge, nearest the corner first, and takes the first free rect that is
TOAST_WIDTH wide and tall enough for a toast, as the frame-rate readout
moves beside a right pane (#6755); failing that, a rect tall enough beats a
wider one too short to show any toast. Without a pane the stack stays
exactly where it was.
* claim: #7688
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Graphics: a background colour of your choice for the 3D view (#7688)
Preferences › Interface › Theme gets a Background row: the theme's
gradient (the default, unchanged) or one colour for the whole application,
filling the view in either theme. The window keeps its own colours, a
picture of the view (`ui.render`) takes the colour too, and `ui.prefs`
sets it as `viewport_background` ([r, g, b] or null).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* feat: add joint-aware assembly Move handles and live motion readouts
* test: improve render job failure diagnostics
* fix: preserve assembly Move compatibility and viewport theme colors
* ci: skip default label sync for fork PRs
* fix: keep Windows CI checks portable after main rebase
* test: cover RTL assembly strings and stable refraction job
* i18n: cover assembly Move in Vietnamese
* i18n: cover assembly Move in French
* fix: complete CGA palette for assembly motion handles
* fix: complete Assembly Move palettes and Turkish strings
* fix: retain assembly move cache answers and toolbar help
* style: format merged assembly Move navigation guard
* fix: align Assembly Move preferences and tests with main
* Fix offline update fixture synchronization and clipped prism intersections
Wait for all v5 manifest requests before deploying v6. Intersect hole-free prism sections over their common height, retaining the established B-rep path for newly clipped perforated sections. Preserve the failing property seed and add closed-form and cap-boundary regressions.
* claim: #8592
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* History: error and warning marks in the browser and on folded folders (#8592)
In the History "In browser" layout, a feature whose build failed gets the
error icon at the end of its row, one that built with a warning the
warning icon, with the message in the tooltip: the marks and text of the
History on the left. A folded History or Features folder carries the
worst mark of what it holds, and so does a folded folder in the History
on the left. Suppressed and rolled-back features are not built and get
none.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- active_body: take every body's owner in one pass (model_body_components) instead of searching the timeline body by body
- Timeline strip: find each chip's result in a table built once per frame (result_index) instead of a linear search per chip
- 4,880-body design: UI frame 31-32 ms -> 7 ms of CPU; tests pin the active body and the result lookup
Co-authored-by: P'tite Tête <asso@ptitetete.com>
* claim: #8095
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Properties: moment of inertia, principal axes and first moments of a part or assembly (#8095)
component.properties and occurrence.properties report each closed body's
inertia tensor about its centre of mass, and in total the tensor about the
total centre of mass (world axes, g·mm²), its principal moments and axes,
the first moments, and with `about: [x, y, z]` the tensor about any point.
The tensor comes from each body's welded export mesh, tessellated once per
body, scaled to the measured mass and turned by each placement; bodies add
by parallel axes. The maths is a new crates/geom inertia module.
The Properties window shows the first moments, the tensor, the principal
moments and axes, and the view marks the centre of mass with the principal
axes while it is open. Inspect → Measure → Properties now opens that window
(it ran the command and showed nothing).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Properties: Copy matrix, and the whole design's card titled just Properties (#8095)
Copy matrix, under the tensor, puts it on the clipboard as three lines of
tab-separated values at full precision, in the units shown. The card for
the whole design is titled Properties; one opened on a component,
placement or bodies keeps its name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Properties: measure beside the window, so a large assembly doesn't freeze it (#8095)
Properties ran on the window thread: 18 s on a 144-body design, with the
window answering nothing meanwhile (#5203). In the desktop app the card now
measures on a copy of the session on a worker, the way #4614 made agents'
measures work, says "Measuring…" until the reply is in, and Close drops it.
A quick measure still shows at once; headless, tests and the web measure in
place.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4127
* Render preview: geometry budget from the device, readable refusals (#4127)
The Render preview refused every scene over a fixed 128 MiB of geometry. On
desktop the budget now follows the device's buffer limit (eight of its
largest buffers, at most 2 GiB; 2 GiB with the usual 256 MiB buffers). The
web keeps 128 MiB.
The product upload runs under its own GPU error scopes: an allocation the
device refuses is reported in the preview instead of reaching the device's
uncaptured-error handler, and the half-uploaded batches are dropped. Buffer
uploads map the buffer themselves so a refused buffer fails the upload
rather than panicking in create_buffer_init.
Refusals name the geometry size and the limit and say how to get under it,
on a theme panel card that stays readable on any preview background.
* Render preview: keep the previous geometry budget behind a preference (#4127)
* Render preview: adapt the device budget to main's GPU upload errors (#4127)
* claim: #5717
* ui(feat): let users choose visible toolbar tabs
Keep Sheet Metal and Weldments visible by default while adding persisted tab visibility controls and restoring specialty tabs for designs that use them.
Signed-off-by: Karl Von Richter<karl@embeint.com>
* ui(fix): respect hidden toolbar tabs in every design
Remove feature-based visibility overrides for Sheet Metal and Weldments. Keep all tabs visible by default and preserve the user choice across feature creation, opening designs, selection and undo.
Signed-off-by: Karl Von Richter<karl@embeint.com>
---------
Signed-off-by: Karl Von Richter<karl@embeint.com>
* claim: #7724
* Update now installs the newest release, checked when pressed (#7724)
* Update: close the unmanaged-install test after the rebase (#7724)
* Update: the refresh messages in Arabic, Hebrew and Vietnamese too (#7724)
* claim: #8533
Co-authored-by: Cursor <cursoragent@cursor.com>
* Parameters: show full names in the table and formula popup.
Hover tips carry the full identifier when Name cells or completion rows clip, and the completion list widens for long suggestions (#8533).
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
* claim: #8183
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Navigation bar: can sit at the top of the view (#8183)
Preferences > Navigation bar gets an Edge choice, Bottom (default) or Top.
On top the bar sits under the ribbon, its menus open downwards and its
tooltips show below it; the OK/Cancel pair and the axis view move down
below it when they would overlap.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Navigation bar: the edge's labels in the complete catalogs (#8183)
ar, he, ja, vi and zh carry every English message; the Edge row's three
labels were missing from them, so `xtask i18n --check` and
`every_complete_catalog_carries_every_english_message` failed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
body_appearance_key hashed only the name of a body's assigned material, so
after material.edit changed that material's colour (or an undo or redo
changed it back) the key stayed the same and the viewport kept the cached
old look. The key now also hashes the material's resolved look; with an
unchanged material the cache is reused as before.
* Keyboard shortcuts: a command can have several keys
Click a key on the Keyboard Shortcuts page to replace it, or the + after it
to add another; every key runs the command and menus show the first. One
key is still saved as a string, several as a list. Taking a key over from
another command leaves that command its other keys. ui.shortcut takes a
slot and reports every key.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keyboard shortcuts: follow main's search layout; fix prefs test for key lists
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Chamfer at a corner of two lines lying on each other cut both back and
added a line of no length between their ends; lines in line with each
other have no corner either. chamfer now refuses a corner angle of 0 or
180 degrees with Fillet's message, "the lines are parallel" (found by a
local trim fuzzer).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Resize Part: say what it works on instead of a parameter error; Parts opens the library (#8735)
Resize Part (parts.resize) started with no standard part selected, as the
ribbon starts it, ran the command with no parameters and showed
"`component` must be an id or a name". It now says to select an inserted
standard part, and that Scale resizes a body. Parts (parts.library) only
listed the library, so its button did nothing: it opens the Insert Part
dialog. The German and Dutch button labels said "scale" ("Teil skalieren",
"Onderdeel schalen"), like the Scale command: they now say change size.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Resize Part: the German label matches the command, and the test checks that nothing ran (#8735)
The German ribbon label reads "Bauteilgröße ändern", the name the command,
its dialog and its messages already use. The hint for a missing standard
part is now one function shared by the ribbon start and the Browser's
Change Part Size. The regression test also checks that the design and its
history stay as they were and no message carries the command's own error,
that a scripted parts.library still only lists the library, and that with a
standard part picked Change Part Size opens on it.
---------
Co-authored-by: semmelrinde <124386289+semmelrinde@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A placement row's menu starts from its component's menu, which takes
Turn Up Axis's enabled state from the component's first placement.
Move/Copy was already set again for the placement right-clicked; Turn Up
Axis and its two turns now are too, so a free second placement can turn
while the first is grounded, and a grounded one can't.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A trimmed circle ended on a line exactly where an arc started on that
line, held there by a point-on-curve tie. Trimming the line away dropped
the tie and left the two ends on one spot, untied. remove_curves now ties
each point held on a removed curve at one of its ends to that end before
the curve goes (found by a local trim fuzzer, 15 -> 12 cases in 2000
seeds).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8480
* Pinch to zoom on touchpad: native Ctrl+wheel pinch zooms the view (#8480)
The viewport's pinch path read only `egui::Event::Zoom`; `immediate_wheel` leaves
wheel events carrying the zoom modifier to egui. Native Linux and Windows
touchpads report a pinch as Ctrl+wheel in points, so the gesture reached neither
path and the view did not move. `pinch_factor` now reads those wheels too, in
every wheel unit and scaled as egui scales them, and `ui.scroll` can send the
same gesture (`ctrl: true`) so scripts and scenarios can replay a pinch.
* fix: finish Ctrl+wheel pinch handling and replay validation (#8480)
* claim: #8561
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dialogs: disable Apply until something changed (#8561)
The dialog footer gets a disabled state for Apply (Footer::nothing_to_apply,
Window::apply_enabled): drawn with the theme's dim ink, not clickable, not
reached by Tab and reported disabled to accessibility. Preferences enables
Apply only while something differs from its snapshot (what Cancel would put
back), so it is disabled when the dialog opens and again after Apply.
ui.prefs replies with apply_enabled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8746
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move/Copy: changing Move Type keeps the move made so far, and picks follow the moved body (#8746)
Switching the Move Type reset the values, so the move made under the
earlier type was lost. The dialog now keeps it (`chain`) and the new type
moves the bodies on from there; params() composes the two into one
solid.move (one turn about the origin and a translation, as before).
While the new type's picks are missing, the kept move alone is made.
The new type measures from where the bodies now stand (Free Move's pivot,
Rotate's ring, round-edge centres and axes on a moved body). The picker,
the edge/face highlights, the centre marker and Rotate's axis line follow
the moving body, mid-drag too; a pick on it is taken back by the current
type's own move so it doesn't move with the move it sets. While the
triad is dragged the moved bodies' highlights are hidden and rebuilt once
on release.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8382
* Browser: Show/Hide context menu on origin axis rows (#8382)
Right-clicking an origin axis row (X, Y, Z) now opens its own menu with
Show/Hide (V), through ui.originPart and browser.visibility like the
origin planes' entry. An axis takes no sketch, so Create Sketch is not
offered.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>