1cfe77bb85a65ea252b25c484efc667328bf08e1
6 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
e12afd11cc |
Ellipse and spline extrudes make one wall; coplanar faces never lose their names to a budget (#11687)
* Planar sources: decide coplanar faces by support group, no budgets that drop sources map_planar_sources kept two budgets, `metadata` (2 MB) and `identity_bytes` (16 MB), charged by each face's source descriptor and by every extra candidate on its plane. When one ran out, faces silently lost their source and with it their persistent name: a 300-hole plate whose top a comb of grooves cuts into 62 strips lost the cap source from strip ~47 on. The budgets bounded the real cost: each result face looked at every candidate on its plane, faces x candidates when many faces are coplanar. The candidates are now grouped by support once (`same_support` against each group's first plane, through the existing PlaneIndex), each group's chosen source, ambiguity and inner flag decided once, and the faces without a role together with the competing tool faces grouped the same way. Each result face then looks up its plane's few groups. The decision is the old one: blocked by an unknown or competing support, else the first candidate on the plane unless another candidate there has a different plane, source or role. Work: grouping looks at each candidate's index window once per group (each candidate is assigned on its group's first look), and each face looks at the group representatives near its plane, so the planes looked at grow with faces + candidates. A counter (`looked`) checks it: n pieces of one cap and n faces on its plane take exactly 2n looks (n*n before), 3n with n blocking supports. Tests: the holed plate keeps the cap source on all 62 strips and the bottom (fails on the old code: face 352 lost its source); the existing planar source tests pass. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Extrude: an ellipse or a spline sketch curve sweeps one wall An extruded ellipse had four side faces (`F2:side:e1#1` to `#4`), one per conic quarter, and a spline one per span: the profile holds such a curve as several exact segments and SMLib got each as its own curve. The Extrude feature's builder (`extrude_whole_sides`) now takes a `one_curve` test from the caller. Each run of free-form segments of one degree that it says are one curve goes to SMLib as one B-spline: the Béziers' control points in a row, knots repeated the degree times at each joint, each span as long as keeps the speed through the joint the same (so the curve is C1 there and SMLib makes one face over it, as it would not over a C0 parametrisation), weights scaled to meet. Exact: the same curve, reparametrised. A loop starts at a run's start, so no run wraps round it. The wall's history lists every piece, and its construction source is its first piece's (as joined collinear lines). The document says which segments are one curve: ExactSketchCurves now also holds each free-form sketch curve's exact segments (`find_free_form`: a segment that is one of them, either way round), and the profile roles use it, so the wall is named `side:<curve>` from its history rather than by the curve nearest its mesh centre. Saved designs rebuild with these walls renamed (`F2:side:e1#k` -> `F2:side:e1`); accepted, no alias kept. Tests: kernel `pieces_of_one_curve_extrude_into_one_wall` (an ellipse in four conics is 3 faces, its volume pi a b h to 1e-6, the wall generated by all four pieces; a 3-span spline closed by lines is one wall; the same solid as a face per piece); doc `an_extruded_ellipse_or_spline_is_one_wall_named_by_its_curve` (one `F2:side:e1`, no piece names, the same names on a second build and after reopening). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Tests: a tray's far rim name is checked on the exact B-rep face The tray test took the point `sheet:...:rim.far` finds as right when it lay within 1e-3 mm of the strip z = 30, 199 <= y <= 200: a slack sized to the mesh. It now asserts on the face the name finds, on exact geometry: the point's distance to that face's surface (FaceSurface::nearest) is within rounding at the part's scale (1e-12 x its size), and the point is inside the face's boundary, counted by crossings of its record edges (each asserted to be a line, the rim being planar). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Tests: delete tests/naming/, the records no test reads since the naming corpus stopped comparing against them Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Viewport test: smooth wall joins drawn from eight G2 spline walls The PR extrudes each spline or ellipse sketch curve as one wall, so the offset-ellipse ring the test built has no joins between faces any more. The test now extrudes a circle drawn as eight cubic splines: eight walls meeting with one curvature along eight upright edges (24 edges in all). It still checks that those joins are left out of the shaded view, drawn in the wireframe and selectable as edges. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel ladder: 009 and 012 record the one-wall extrude (an extruded spline or ellipse sweeps one wall) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
dc38349cbf |
Layer split stage 1: the B-rep record, native body file and Vec/Plane come from solidcore-record (#11496)
* Kernel: the B-rep record and the native body file come from solidcore-record SolidCraft's portable B-rep record (`solidcraft_geom::brep`: brep.rs, topology, history, envelope, part, curve2) and the native body file (`solidcraft_kernel::native`: the tagged binary codec and the container) move to solidcore's `solidcore-record` crate: geometry as data, with structural validation and no maths (solidcore's docs/layers.md, stage 1). Every caller uses `solidcore_record::brep` and `solidcore_record::native`; the old copies are deleted. What computes from coordinates stays with the kernel, in geom's `brep`: - `brep::check`: the record's geometric checks (orthonormal frames, non-degenerate planes, unit revolution axes, non-singular placements). `check::validate` and `check::validate_built` are the record's validation and these together, and every caller of `Brep::validate` uses them, so what is accepted is unchanged; - `brep::label`: a surface's natural ranges (a cone's apex), `curve_interval`, `edge_curve_interval` and `form_turns`; - `brep::pcurve::eval`: a pcurve's point; - `geometry::check`, `placement::moved` and `split_edges` become functions on the record. The kernel's native module keeps the conversion between a body and its saved record (metadata.rs) and checks the decoded record's geometry. `native/analytic.rs`, which no module declared, is deleted. solidcore-record is pinned to its rev on solidcore's `layer-record` branch. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NvoxKMbMFSQU8tzRtoJhtT * Geometry: Vec2, Vec3, Plane and the profile types come from solidcore-record The plain data of vectors and points, sketch planes and planar profiles (`Seg2`, `Loop2`, `Region2`) moves to `solidcore-record`, with its constants and component-wise operators only (owner decision, solidcore layer split). Their geometry stays in geom as traits: `Vec2Geom`, `Vec3Geom`, `PlaneGeom`, `Seg2Geom`, `Loop2Geom`, `Region2Geom`, `Seg2ArcFit`, `Loop2ArcFit` and `Region2ArcFit`, in scope with `use solidcraft_geom::prelude::*`. Every caller names the types from `solidcore_record`; geom no longer defines or re-exports them. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NvoxKMbMFSQU8tzRtoJhtT * Kernel: pin solidcore-record to solidcore main f5e8e9a29 solidcore-record is merged on solidcore main (tangency-labs/solidcore#2519); its crate there is identical to the rev pinned before but for its clippy configuration. The lock is regenerated against the merged rev. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NvoxKMbMFSQU8tzRtoJhtT --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
2f43ad5c5b |
Loft: a circle lofted to a non-star-shaped profile is split once round (#2570) (#3670)
* claim: #2570 * Loft: a circle lofted to a non-star-shaped profile is split once round (#2570) A circle section was split at the lead section's vertex directions, kept in the lead's order and forced to increase by whole turns. A non-star-shaped lead (a C, a comb) turns back on itself, so the circle wound round many times and closed with a negative arc: self-crossing walls and a huge mesh (which froze the web build while meshing it). The circle is now split exactly once round: at the lead's directions when they go round once in order (clockwise on a plane facing the other way), otherwise at the lead's perimeter fractions, evenly as the fallback. Every arc is finite and positive and they total one turn; the unbounded loop is gone. Section preparation is split out as loft_section_loops so the resampled sections can be checked. |
||
|
|
91de39d3fe |
fix(kernel): revolving adjacent profiles on the axis makes no zero-area faces (#490)
Profiles revolved together merge into one region that keeps a vertex where each shared edge met the axis. With the axis edge in several pieces the loop skipped the builders for a profile with an edge on the axis, and the generic sweep turned each piece into a degenerate face that booleans failed on. Runs of collinear axis lines are merged into one first. Fixes #487 Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
296683229d |
Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)
* WIP deep rename (not for push) * WIP2 * WIP3 * WIP4 wxs fix * rustfmt * Rename the remaining identifiers in merged crash-report code Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
d69ebbee1b |
refactor(kernel): number profile loops once and record face history as faces are built
One numbered loop type (crate::numbered) carries each segment's profile numbers through orientation, snapping, circle re-seaming, re-sampling and rotation; every builder orients its regions through it once. Builders that make their own side faces pair each face with its provenance as it is made (ruled walls by the wire edges each face holds, smooth lofts, coils and path sweeps by segment), and cap_and_close appends the caps itself. Column following is kept only for faces truck sweeps internally (rsweep, tsweep along paths, cones, where an apex vertex stays put). Extrude derives face sources and history in one topology pass. One attach entry point takes operands with their edges already indexed. Geometry, face order, face sources and recorded origins are unchanged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8 |