Commit Graph

312 Commits

Author SHA1 Message Date
jyviko 2425f8b453 Wave 238/509: geom: a face's box reaches its boundary's extremes, not its samples' (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 903e371fa jyviko: geom: a face's box reaches its boundary's extremes, not its samples'
- cfe1b8b92 jyviko: step: a loop through its surface's pole has its seam
- 0bea4631b jyviko: kernel: IGES trim pieces that miss their meeting point are closed onto it
- 0e6681a2d jyviko: kernel: the largest fitting fillet shrinks only on a refusal as too large

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-25 21:27:27 -04:00
jyviko a68a6ca981 Wave 231/509: doc: a join groups pieces that touch nothing; only edge and point contacts are kept apart (and 1 more)
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 810f0d66d jyviko: doc: a join groups pieces that touch nothing; only edge and point contacts are kept apart
- 1d98d5111 jyviko: smlib: solids touching round a pocket each export as one closed shell

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-25 08:48:02 -04:00
jyviko 8554b2a0e4 Wave 229/509: doc: a join keeps solids that only touch as separate bodies (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 94ee28d5c jyviko: doc: a join keeps solids that only touch as separate bodies
- 3e2b109cc jyviko: engine: feature commands take touching; a join's result notice
- ec6fa9706 jyviko: kernel: a seam with one face on both of its sides is a seam, and no pick takes it
- 19cf11ef3 jyviko: kernel-cases: ladder 07-fillets/016's second fillet rounds only its picked edge

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-24 22:49:17 -04:00
jyviko 8b3eedd0aa Wave 211/509: doc, engine, ui: placing the model returns its error; placements are checked where they are set
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 9a7958857 jyviko: doc, engine, ui: placing the model returns its error; placements are checked where they are set

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-22 13:38:41 -04:00
jyviko 9aedc5faed Wave 210/509: doc, engine, kernel: solid.fillet and solid.chamfer round each picked edge's tangent chain by default (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 84bd2daad jyviko: doc, engine, kernel: solid.fillet and solid.chamfer round each picked edge's tangent chain by default
- d0ff1dcfa jyviko: doc: an extrude's taper without a corner rule picks one per profile
- 5e7aba8df jyviko: loft sections matched to their neighbours
- 2752eee61 jyviko: kernel: merged topology counts no seam edge (a face on both sides of it)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-22 14:24:15 -04:00
jyviko 3557e3c563 Wave 205/509: kernel: union_all, one SMLib union of many bodies checked once, history over every operand (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 2ffbbc74d jyviko: step: a cone within the file's uncertainty of its limit plane over the face is read as that plane
- 0185ccc1e jyviko: solidcraft-smlib: Brep::union_all, the union of many bodies in one SMLib call
- 0213c3dfa jyviko: kernel: union_all, one SMLib union of many bodies checked once, history over every operand
- 83d965f30 jyviko: doc: a join into one target and an intersection's tools are one union_all call

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-22 08:46:55 -04:00
jyviko 0a014857ab Wave 204/509: doc: an extrude's taper saves how it closes the profile's corners (and 1 more)
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 045961445 jyviko: doc: an extrude's taper saves how it closes the profile's corners
- 1b5ca02b8 jyviko: solidcraft-smlib: SMLib's tangent draft corner meets lines at an edge (fork ccc56fd and docs)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-22 13:14:40 -04:00
jyviko 542715de62 Wave 203/509: kernel: a tapered extrusion closes its corners by a rule, preserving curvature by default
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 384c5866f jyviko: kernel: a tapered extrusion closes its corners by a rule, preserving curvature by default

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-22 09:11:24 -04:00
jyviko 50ca3c5a61 Wave 192/509: kernel: corner rules for direction, rails and closed paths; no feature gate on SMLib sweeps (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- af4e97b64 jyviko: cli: the rig and the oracle reach MeshTolerance through the engine
- f7daf6124 jyviko: doc, engine: the unused revolve targets and the formatting of the exact tools
- caa5ed0e6 jyviko: kernel: twisted and scaled sweeps round corners by the plain sweep's corner model
- dead22ba7 jyviko: kernel: corner rules for direction, rails and closed paths; no feature gate on SMLib sweeps

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-22 07:49:18 -04:00
jyviko 816e43c5d0 Wave 191/509: engine: no boolean retries to report; overlaps are SMLib's exact intersection (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 712caf8bf jyviko: engine: no boolean retries to report; overlaps are SMLib's exact intersection
- 431c3f6d0 jyviko: doc: plastic features' tools stand on the face as drawn
- 4ca7793a3 jyviko: doc: a hole in sheet metal is a cut-out or a bore by its drill's direction
- 8d91c19f1 jyviko: brep: an intersection curve's point is a function of t alone

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-22 07:48:53 -04:00
jyviko 540aa0da1b Wave 185/509: engine: feature replies carry no boolean diagnostics (and 1 more)
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 88b1ba507 jyviko: doc: a feature result has no boolean diagnostics any more
- 1ecf00b5a jyviko: engine: feature replies carry no boolean diagnostics

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-22 07:36:40 -04:00
jyviko 18618bb72c Wave 172/509: doc: extrude and revolve tools go into the boolean as drawn
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- b90cdc521 jyviko: doc: extrude and revolve tools go into the boolean as drawn

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-22 07:29:39 -04:00
jyviko 13df957b01 Wave 171/509: kernel: surface match on the record, through bridge's record API (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 7c0d9b5e8 jyviko: kernel: the general fill on loops of five or more edges, its patches about a centre
- 87907628e jyviko: kernel: surface match on the record, through bridge's record API
- 22fde06a3 jyviko: kernel: loft blend on the record, through bridge's record API
- 7e7193b33 jyviko: doc: the faceted thread groove is gone; the groove is SMLib's exact screw sweep

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-22 07:25:17 -04:00
jyviko 966af74030 Wave 168/509: The truck crates leave the workspace; the rig and threads run on SMLib alone
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 166ebe2ee jyviko: The truck crates leave the workspace; the rig and threads run on SMLib alone

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-22 07:23:52 -04:00
jyviko 4a589aca8c Wave 147/509: doc: sweeps along linked and planar curves follow the exact curves (and 1 more)
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 7952516eb jyviko: doc: sweeps along linked and planar curves follow the exact curves
- 43e8b0349 jyviko: kernel: a point path's polyline is swept as the lines it is, however smooth

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-22 01:01:49 -04:00
jyviko ec7077e326 Wave 116/509: doc: a sweep round a closed path starts where the profile is (#3345) (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- ba99405e2 jyviko: doc: a pattern or mirror of a pattern or mirror copies what that one made
- 386b1d123 jyviko: doc: a sweep round a closed path starts where the profile is (#3345)
- 5df8a5565 jyviko: engine: an extrude Join, Cut or Intersect leaves hidden bodies alone (#2464)
- f10dfd8d0 jyviko: kernel-cases: crossing equal holes leave each wall in two faces

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-21 23:55:26 -04:00
jyviko ce8c6063bd Wave 113/509: kernel: SMLib sweeps along drawn 3D sketch splines, exactly (and 1 more)
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- d1eb8b20a jyviko: kernel: SMLib sweeps along drawn 3D sketch splines, exactly
- f73b3be1a jyviko: kernel: a 3D sketch spline path takes the SMLib sweep only

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-22 00:22:49 -04:00
jyviko 4eff79e57e Wave 112/509: solidcraft-smlib: pcurves on B-spline faces are SMLib's own UV trims (and 2 more)
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 667cd3356 jyviko: solidcraft-smlib: pcurves on B-spline faces are SMLib's own UV trims
- e57f2f2a5 jyviko: brep: a face's points search one grid of its surface, made once
- 1bc0df6d0 jyviko: doc: a join of many tools into one target unions them in a balanced tree

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-21 23:39:37 -04:00
jyviko 0bd4531c7c Wave 110/509: WIP kernel: Body::mesh(&MeshTolerance) as the one mesher (does not build yet)
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 42997a62e jyviko: WIP kernel: Body::mesh(&MeshTolerance) as the one mesher (does not build yet)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-22 00:18:36 -04:00
jyviko d62301ad01 Wave 108/509: kernel: SMLib sweeps round corners and along free-form paths, lofts with holes or to a point, drafts on a foot
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 69a7a85cb jyviko: kernel: SMLib sweeps round corners and along free-form paths, lofts with holes or to a point, drafts on a foot

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-21 22:55:56 -04:00
jyviko cf2b37d9c9 Wave 100/509: solidcraft-smlib: a solid touching itself along an edge comes back with every edge bounding two faces (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 02bfd6e10 bherbruck: kernel: draft through SMLib
- d20e91f8c jyviko: doc: re-anchor a stored face pick strictly inside its named face
- 36b7aa267 jyviko: solidcraft-smlib: a build without SMLib keeps the sweeps' curve lists without a dead-code error
- d22e89bcc jyviko: solidcraft-smlib: a solid touching itself along an edge comes back with every edge bounding two faces

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-21 13:26:19 -04:00
jyviko 723b84a044 Wave 90/509: kernel: solids an SMLib boolean leaves touching come back as separate solids (and 2 more)
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 29d307bdc jyviko: doc: a modelled thread through SMLib cuts the exact groove
- 5dd3acdec Brennen Herbruck: kernel-cases: on the kernel branch a thread off its hole or shaft size is refused
- b900d6d46 jyviko: kernel: solids an SMLib boolean leaves touching come back as separate solids

Co-authored-by: Brennen Herbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-21 10:13:34 -04:00
jyviko b96d239c16 Wave 6/509: brep: docs for schema 4, and a pcurve lift test (and 1 more)
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 02abecd52 jyviko: brep: docs for schema 4, and a pcurve lift test
- 7f1e85f71 jyviko: naming: make the reference lookups a rebuild uses public

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-20 23:05:44 -04:00
Jackson Oursland 4e07b6c4b7 Assembly: name placed bodies without rescanning the design (#7380)
Naming a placed body scanned every occurrence and body of the design, so the
world state and every caller naming all placed bodies grew with bodies times
design size. WorldNames indexes the design once and names each body in time
proportional to its occurrence path; one naming routine serves both it and the
single-body scan. Names are unchanged (a test compares them with the scanning
implementation).

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-27 03:30:33 +00:00
Homero Thompson 622a392a83 Extrude to Object: a Join extrude also joins the target body (#6424) (#6471)
* claim: #6424

* fix: a join extrude also joins the body it targets (#6424)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 00:53:25 +00:00
HiroKenEz 56bcd872cb Cone primitive: solid.cone with base and top radius (#5641) (#6250)
* claim: #5641

* Cone primitive: solid.cone with base and top radius (#5641)

A cone or truncated cone placed like the cylinder: base centre, axis,
base radius (or diameter), top radius (0, the default, is a full cone)
and height, with the new body / join / cut / intersect choice. It is
built from what the kernel already exposes, a revolve of its half
section about +Z through the origin, moved into place. Toolbar entry
after Torus, a Cone dialog that also places it on a picked face, Edit
Feature, a timeline icon, pending UI strings and attribution, and one
pending design-format change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 23:57:43 +00:00
DuBearte f077f48318 Sketch: a changed length dimension keeps its start point, so a side grows from its first corner (#6070) (#6139)
* claim: #6070

* Sketch: a changed length dimension keeps its start point, so a side grows from its first corner (#6070)

Changing a dimension's value re-solved its sketch as the smallest move from
the stored positions, which splits the change between both ends: a
rectangle side set from 40 to 60 mm grew 10 mm each way. parameters.change
now first solves a sketch whose length dimension (distance, horizontal or
vertical distance, line length) the parameter drives with that
dimension's first point held, and stores the result, so evaluation has
nothing left to move. Where holding it can't solve (a symmetry moves both
ends), evaluation solves as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 23:03:31 +00:00
Dahak Builds bd44f6f496 Reference features by id everywhere: Pattern/Mirror seeds and construction planes (#1134) (#6858)
* claim: #1134

* doc: key pattern/mirror seeds and construction planes by feature id (#1134)

* engine: resolve seed names the way evaluation did; keep timeline.edit name input (#1134)

* fmt/clippy cleanups (#1134)

* ui: resolve construction-plane names by feature id in plane_description (#1134)

* fmt: sketch_attachment_ui after rebase adaptation

* engine: timeline.add resolves legacy name-keyed seeds and plane names (#1134)

* chore: re-trigger CI (GPU runner timeout flake)

* doc: replayed_sources walks id-keyed pattern seeds (rebase adaptation)

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-26 22:56:06 +00:00
Dahak Builds 2863b80574 Sketch: 3D arc command (#5681) (#5682)
* claim: #5681

* sketch: exact circular arcs on drawn 3D wires (#5681)

Add WireArc (centre, unit normal, radius, start/end) as an optional analytic
form on drawn 3D sketch wires, with arc_from_3_points, arc_sweep and
sagitta-bounded arc_polyline; add_drawn_arc_in stores the arc, its three
defining fit points and its samples; move_drawn_point re-derives the arc
atomically and refuses collinear points; validate_wires checks saved arcs.

* engine,ui: sketch.arc3d exact 3D arc command (#5681)

sketch.arc3d draws an exact circular arc through three world points in a 3D
sketch, stored analytically beside its fit points and samples; sketch.move3d
rebuilds it, sketch.inspect reports centre/radius/sweep; placement mapping
(map_wire, now shared with the engine's world state) transforms the arc.
One pending design-format file records the new field. The viewport's 3-Point
Arc tool draws a 3D arc when clicked off the sketch plane, with a live arc
preview; the SKETCH panel offers sketch.arc3d.

* ui,engine: 3D Arc button starts an interactive tool (#5681)

sketch.arc3d now maps to a Draw(3) tool handled by sketch3d: three world clicks (start, end, through - same order as the 2D arc tool) run the command, with the live arc preview and snapping. The command is only enabled while a 3D sketch is open, so the toolbar never offers a tool that could only fail. Locale labels for the command.

* ui: cargo fmt

---------

Co-authored-by: RayGalt <RayGalt@pm.me>
2026-10-26 16:29:39 +00:00
amolinari-autotex 47285ccb88 Thread: right- and left-handed direction (#4414) (#4415)
* claim: #4414

* feat: persist right and left thread handedness (#4414)

* fix(thread): verify handedness with referenced holes and complete locales

* test: verify handedness with merged tapped thread catalogues

* test: retain tapped thread depth when changing handedness (#4414)

* test: restrict Unix symlink coverage to Unix targets

* test: inspect hole thread depth inside edit command parameters (#4414)

* test(doc): initialize cylinder radius in handedness fixture
2026-10-26 13:57:08 +00:00
amolinari-autotex 13cd45d1f1 Apply complete feature transactions off the window thread (#3133) (#3135)
* claim: #3133

* Apply complete feature transactions off the window thread

Evaluate dependent history and prepare reference and GPU display caches before accepting a guarded result. Preserve the evaluated original model for safe editor cancellation and journal only accepted commands.

* fix(ui): preserve original marker across sketch-to-feature edits

* test(ui): verify edit-sketch cleanup and guard Unix link fixture

* test(ui): fix texture disposal and unreachable assertion in feature tests

* fix(build): compile CLI link inspection only on Unix
2026-10-26 13:27:04 +00:00
Steven Waters 2755c9ccfb Pin auto-generated body names (#6402) (#6403)
* Pin auto-generated body names

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Fixed body counter

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Fixed formatting

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Altered test behaviour to reflect new pinned body names

Co-authored-by: Claude <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-26 12:33:58 +00:00
froglemonade2 e063a7778e Axes and points from circular edges and round faces (#3128) (#4610)
* Axes and points from circular edges and round faces

In 3D, a round edge or face stands for its circle wherever a command
takes an axis or a point.

Revolve, Surface Revolve, both Circular Pattern dialogs, Plane at Angle
and Move -> Rotate take a circular edge (through its centre, along its
normal) or a cylinder, cone or torus face (its axis). The features keep
the pick as a model reference, so they follow the model when a parameter
moves it. Straight edges work as before; flat faces are refused.

Every 3D point input takes a circle's centre: construction points (which
follow the circle), To Object, patch points, hole placement, and Move's
pivot and points. Hovering shows the axis as a dashed construction line
or the centre as a star, and the dialog's chip names what the pick
stands for ("centre of edge 10", "axis of face 3").

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Format the round-pick hover check

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Selection chips: name a round pick as a circle centre or axis

The chip has room for little more than the body and a word or two:
"Shaft · circle centre", "Shaft · circle axis", "Shaft · face 2 axis",
and "Shaft · point" for a point of the model.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Move: a circle's centre in a placed component is where the component shows it

Move's pivot and points read a picked circle from the model in its
component's own frame, while the pick is in the world. They now read it
from the world state (and, editing a Move, from the state before it,
placed the same way), as the viewport and the other round picks do.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Plane at Angle on a planar face about a model edge: test that it follows both

Upstream #1956 made a planar face a base for Plane at Angle; this branch makes a model edge an
axis. The rebase keeps both in one PlaneRef::AtAngle.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 12:27:32 +00:00
semmelrinde 4d06daf87b Patterns: one before the feature it copies follows that feature's parameters (#6726) (#6727)
* Patterns: one before the feature it copies follows that feature's parameters (#6726)

A pattern or mirror of features made with the timeline rolled back comes
before its sources and replays them from their definitions. Its
fingerprint chained only the features before it and its own inputs, so a
change of a source's parameter left its result in place: the box grew,
its copy kept the old length, also after rolling forward.

The chain fingerprint of a pattern or mirror of features now also takes
the fingerprint of each feature it replays (and of their sources, for a
pattern of a pattern), wherever they are in the timeline.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Patterns: a test for a later feature taking a deleted source's name (#6726)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Patterns: fingerprint the replayed sources with the document, as fingerprint now takes it (#6726)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 12:01:58 +00:00
SS-EN daecea6edf Evaluation cache: charge each state only for the bodies it made, so setting a parameter back restores (#6897)
The evaluation cache's 64 MB budget charged every cached feature result the whole model, though a
state shares every body it did not change with the state before it. A design whose model is a few
MB kept only its last few dozen results, so setting a parameter back recomputed what had dropped
out. Each result is now charged for the bodies and sketches it does not share with the state it
started from.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 11:14:57 +00:00
NOWN-DEV fa961eaa31 Sheet metal: a pattern of a cut made in the flat is kept like the cut (#6841) (#6853)
* claim: #6841

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Sheet metal: a pattern of a cut made in the flat is kept like the cut (#6841)

A rectangular, circular or path pattern of an extrude cut through sheet metal was refused
("this sheet machining cannot be preserved in its flat material"), though the cut itself is
kept as a cut-out of the flat pattern. The pattern replayed its copies through the generic
boolean, whose sheet check refuses any change the sheet model can't keep; the cut goes through
the sheet's flat machining first.

Each copy of an untapered extrude cut is now machined into the sheets the same way, in its
moved sketch plane (a moved copy keeps the extrude's prism certificate), and then cut from the
other targets. A copy that meets a folded bend is refused as the cut is there. Mirrored copies
(the sketch plane turns over) and patterns of an intersect (which cut with the union of their
copies) keep the generic path.

Fixes #6841.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 11:12:12 +00:00
Colin Faulkingham 12b0d9dbff Preserve unchanged results when rolling the timeline (#6008) (#6067)
* claim: #6008

* Reuse rolled-back timeline results after cache eviction
2026-10-26 10:42:32 +00:00
semmelrinde 613903229e Patterns: copies of a To Object extrude follow the face it reaches (#2121) (#6093)
A feature's face points are moved onto their named faces before it is
evaluated, so a To Object extrude follows its target face when an earlier
feature moves it. A pattern's or mirror's copies were built from the
feature as stored, with the face where it was picked: after a gear's disc
was made thicker, the tooth reached the new top but its pattern copies
kept the old height. The copies now use the same moved points; the move
is one helper used in both places.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 10:42:28 +00:00
raykholo 878339cac8 Sketch patterns: count, spacing, and angle follow parameters (#5231) (#5332) 2026-10-26 04:31:55 +00:00
Frank b5bab3f663 Browser: surface bodies get the surface icon in the Bodies folder (#4165) (#4168)
* Browser: surface bodies get the surface icon in the Bodies folder (#4165)

Every row in the Bodies folder had the solid body icon, so a surface (an
open shell, such as a Surface Revolve of an open curve) looked like a
solid. A body whose shell does not close now shows the existing surface
icon; solids keep the body icon.

Body::is_surface walks every shell's edges, so ModelBody caches it once per
body (shared by clones, like outline_bounds) instead of the browser
checking it every frame.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Add the surface icon to the requested-icons manifest

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 21:51:02 +00:00
NOWN-DEV 826244bb28 Text parameters: a sketch text's words built from them follow every change (#727) (#6364)
* Test: a text's words follow its text parameters, and so does its cut

A sketch text whose words are an expression of text parameters (`Label + '-L'`): a parameter edit
and a configuration row that sets the parameter relabel the text, the text's cut follows, and the
expression is saved with the design.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Text parameters: a sketch text's words built from them follow every change

A design's parameters are numbers; a text's words (a part label, a size code) could only be typed.
Text parameters hold words: `parameters.add` or `parameters.change` with `unit: "text"` (the
expression is the text, quotes optional), and `sketch.text` and `sketch.edit_text` take
`text_expression` (quoted texts and text parameters joined by `+`, `Label + '-L'`) instead of
`text`. The text is laid out anew from its expression on every evaluation, so a parameter edit,
a configuration row or a script relabels it and the features built on it (a cut, an emboss)
follow in the same rebuild. The design file keeps the text parameters and each text's expression
(one pending format change); a configuration table's parameter column can be a text parameter;
the Parameters dialog lists them under the unit `text`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Text parameters: the joints' same-but-features check compares the text parameters

The joints are solved once per change unless the design differs only in its features
(same_but_features, #6372), which names every Document field. The text parameters are a
field of their own and change what a text's words evaluate to, so two designs that differ
in them are not the same but for their features.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 20:24:23 +00:00
raykholo 87c9a37663 Cut and Intersect say which component holds the body they missed (#4639) (#4641) 2026-10-25 18:42:50 +00:00
amolinari-autotex 52e5bc114e Display cosmetic internal and external threads (#2367) (#2868)
* claim: #2367

* feat: distinguish cosmetic threads in shaded views

* test: keep cosmetic thread coverage compatible with current sections and assemblies
2026-10-25 14:53:24 +00:00
semmelrinde e5613ebfdf Placing and meshing: no threads started for bodies that are done already (#6406)
Every command in a design with placed components places their bodies
again on up to 16 threads, though nearly all of them are taken as they
were placed before (the same body by the same matrix). Those are now
taken on the calling thread and only the rest are placed on threads.
Warming the meshes (and display plans) of a state likewise starts
threads only for the bodies that have none yet.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 12:48:00 +00:00
Ahmad Khan 5a5a98ee80 Sheet metal: Path Flange, a chain of bends on an existing sheet edge (#4094) (#4096)
* claim: #4094

* Sheet metal: Path Flange, a chain of bends on an existing sheet edge (#4094)

Path Flange (`sheet.path_flange`): sketch an open chain of lines across a sheet edge, pick the
edge and one line; each line becomes a flange as long as the line and each corner a bend, one
feature and one body. The edge flange takes further bends (`then`), each on the far edge of the
one before, and the Flange dialog shows them as rows with a bin each.
2026-10-25 11:33:42 +00:00
Jesper We bbc3aa4301 Offset Plane: through a point (#3765)
* claim: Offset Plane through a point

* Offset Plane: through a point instead of at a distance
2026-10-25 06:02:14 +00:00
amolinari-autotex face5e2d31 Hole: independent tapping depth and recessed drill points (#4486)
* feat(hole): checkpoint independent tapped thread depth

* test(hole): cover independent tapped thread depth boundaries

* fix(doc): bind tapped depth to the useful cylindrical wall

* feat(hole): dimension independent thread depth in the section editor

* fix(hole): preserve custom tapping controls after main integration

* feat: add recessed-hole drill points and order depth dimensions

* fix(hole): match the current preferences and UI kit

* fix(hole): verify reference placement with independent tapping depth
2026-10-25 02:31:24 +00:00
NOWN-DEV 74004841b4 Sketch text: a text on a path follows the path in the same evaluation (#6215)
* Test: a text on a path follows the path when a parameter moves it

A construction line placed by a dimension that reads a parameter, and a text laid along it: after
the parameter changes the line has moved and the text has not. It follows one evaluation late.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Sketch text: a text on a path follows the path in the same evaluation

Problem: texts are laid out with the sketch's links, before the sketch is solved. A solve that
moves the curve a text runs along (a path placed by a parameter) left the text where the path had
been before the change, so it followed one evaluation late.

Solution: after a solve that keeps the sketch's orientation, every text that runs along a curve
of its sketch is laid out again along that curve as the solve left it; a text that no longer lays
out adds its warning.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:29:31 +00:00
NOWN-DEV be08517de2 Construction: a plane on a sheet's flat face follows the face (#6217)
* Test: an offset plane on a sheet flange's face follows the flange

An offset plane on the inner face of an edge flange, picked by body and index as model.faces
lists it. When the base gets wider the flange moves along x and the plane stays where the face
was picked; a sketch on the same face follows it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Construction: a plane on a sheet's flat face follows the face

Problem: a construction plane on a flat face of a sheet body resolved the stored plane, which is
only where the face was when it was picked. When the sheet changed the plane stayed behind, while
a sketch on the same face follows it by its sheet face name.

Solution: a construction plane on a sheet's flat face resolves that face's plane as it is now, as a
sketch on the face does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:29:28 +00:00
NOWN-DEV c242c484a8 Construction: the root's constructions are found once the design has a component (#6219)
* Test: a plane through a construction axis follows it in a design with a component

Two offset planes, the axis where they meet and a plane through that axis. Once the design has a
component, a parameter change fails the last plane with "unknown construction `Ax`".

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Construction: the root's constructions are found once the design has a component

Problem: once a design has a component, the root's construction features are built in the model
placed in the world. That state carried each component's bodies, sketches and threads, but not
its construction planes, axes and points, so a construction built on another one failed on every
evaluation with "unknown construction".

Solution: the world state carries each component's constructions where the component is placed
(moved by its occurrence's placement, as the bodies are).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:55:56 +00:00