* claim: #3133
* Apply complete feature transactions off the window thread
Evaluate dependent history and prepare reference and GPU display caches before accepting a guarded result. Preserve the evaluated original model for safe editor cancellation and journal only accepted commands.
* fix(ui): preserve original marker across sketch-to-feature edits
* test(ui): verify edit-sketch cleanup and guard Unix link fixture
* test(ui): fix texture disposal and unreachable assertion in feature tests
* fix(build): compile CLI link inspection only on Unix
While an agent's batch computes off the window thread (#1989), the chip reads
N/M · <command>. It is centred on the navigation bar, just above it, and moves up
past any toast or panel it would cover.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Axes and points from circular edges and round faces
In 3D, a round edge or face stands for its circle wherever a command
takes an axis or a point.
Revolve, Surface Revolve, both Circular Pattern dialogs, Plane at Angle
and Move -> Rotate take a circular edge (through its centre, along its
normal) or a cylinder, cone or torus face (its axis). The features keep
the pick as a model reference, so they follow the model when a parameter
moves it. Straight edges work as before; flat faces are refused.
Every 3D point input takes a circle's centre: construction points (which
follow the circle), To Object, patch points, hole placement, and Move's
pivot and points. Hovering shows the axis as a dashed construction line
or the centre as a star, and the dialog's chip names what the pick
stands for ("centre of edge 10", "axis of face 3").
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Format the round-pick hover check
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Selection chips: name a round pick as a circle centre or axis
The chip has room for little more than the body and a word or two:
"Shaft · circle centre", "Shaft · circle axis", "Shaft · face 2 axis",
and "Shaft · point" for a point of the model.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move: a circle's centre in a placed component is where the component shows it
Move's pivot and points read a picked circle from the model in its
component's own frame, while the pick is in the world. They now read it
from the world state (and, editing a Move, from the state before it,
placed the same way), as the viewport and the other round picks do.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Plane at Angle on a planar face about a model edge: test that it follows both
Upstream #1956 made a planar face a base for Plane at Angle; this branch makes a model edge an
axis. The rebase keeps both in one PlaneRef::AtAngle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The blue, green, red scale's lightness rose and then fell (L* 44 up to
72 and back to 50), so a flat face and a tight radius looked alike with
hue lost, and its upper part merged for a red-green loss. The stops are
now dark blue, a middle grey-gold and light yellow in one straight
blend, as measured in the issue: L* rises the whole way and every
quarter step stays clear for normal, protan, deutan and tritan vision.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: a Weldments ribbon tab (#4003)
- WELDMENTS joins the ribbon after SHEET METAL and is built the same way:
Sketch (New Sketch), Create (Frame Member) and Configure (Parameters,
Configurations). Frame Member's home moves there from MODEL > Create.
- Always shown, as a frame starts from a sketch of its lines. It selects
itself and takes the contextual style when the selected body (or the last
body of the active component) is a frame member; sheet metal comes first.
- It uses the default accent until the palette has a colour for it.
- The tab label is in every catalog; docs/ribbon-layout.md, docs/frames.md
and the tab list in docs/control-protocol.md follow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: Weldments keeps the ordinary tab look (#4003)
Weldments still selects itself when a frame member is the active body, but
no longer takes the solid contextual fill or the 2 px accent line under the
tab row: selected, it looks like a selected Model tab. Only Sketch and Sheet
Metal (on a sheet body) are contextual.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Expressions: a number and its unit are one value (10 mm / 2 mm is 5)
A unit written after a number was multiplied in at the precedence of `*` and
`/`, so `10 mm / 2 mm` was (10 mm / 2) mm = 5 mm² and `90 deg / 1 rad` a value
in angle², reported as a unit error. The number now takes the unit after it
before `*` and `/` apply; a fraction of numbers before a unit stays one value
(`1/2 in` is half an inch), and an exponent stays a plain number (`2^3 mm`).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Expressions: after a division, a fraction before a unit only when closed up
`width / 10 / 2 mm` read the `10 / 2 mm` as the fraction 5 mm and gave
width / (5 mm) = 8 instead of (width / 10) / 2 mm = 2. After a `/` the
fraction rule now needs the fraction written without spaces (`1 in / 1/2 in`
is still 2); elsewhere `1/2 in` and `10 / 2 mm` are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Patterns: one before the feature it copies follows that feature's parameters (#6726)
A pattern or mirror of features made with the timeline rolled back comes
before its sources and replays them from their definitions. Its
fingerprint chained only the features before it and its own inputs, so a
change of a source's parameter left its result in place: the box grew,
its copy kept the old length, also after rolling forward.
The chain fingerprint of a pattern or mirror of features now also takes
the fingerprint of each feature it replays (and of their sources, for a
pattern of a pattern), wherever they are in the timeline.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Patterns: a test for a later feature taking a deleted source's name (#6726)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Patterns: fingerprint the replayed sources with the document, as fingerprint now takes it (#6726)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3538
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Updated AppImage takes the release's file name (#3538)
A versioned AppImage name (solidcraft-<version>-linux-<arch>.AppImage) is
replaced by the new release's name, so zsync-based tools keep finding the
update data. Other names are kept.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
A sketch dimension read Ø40.00, with nothing to tell millimetres from
inches, while the value inputs and the pointer's coordinates show the
unit. Length labels now end with the design's unit (Ø40.00 mm, 1.000 in,
(25.00 mm) for a driven one); angles keep their degree sign.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
With a section shown, the marking pass decided where the cap shows (the stencil) and wrote the
depth everything after it tests against. #1768 gave it the faces' FACE_BIAS for the second job,
so edges draw over their own faces (#1434). For the first job its slope part is unfair: next to an
edge where a back face seen through the cut meets a front face, the front face won a band about a
pixel wide although the back face is nearer. The cap skipped that band, and the edge line showed
through the cut.
#6363 marked those samples again from the back faces, pulled toward the eye as far as FACE_BIAS
pushes. That closes the gaps beside the edges, but the pull also lets back faces win wherever they
lie within the push of a front face, along every body's far silhouettes, and the cap hatches that
band. On bherbruck's block, the band away from the cut went from 58 px orthographic and 534 px
perspective before #6363 to 618 and 780 with it. In the app, his filleted hub showed it in every
frame of a 36-step orbit in both projections.
This replaces that pass. While a section is shown the opaque model now draws in four steps (`Cut`):
1. mark: the faces by their true depth (no push): colour, the stencil and depth;
2. a triangle over the viewport sets the depth back to the far plane, colour and stencil kept;
3. push: the faces again with FACE_BIAS, depth only, so the depth is what unsectioned frames have
and edges draw over their faces as before;
4. cap: depth only, as #6728 made it; the mark pass has drawn the cap's colour and hatch, as fs_solid
draws a back face seen through the cut.
The window pass's depth reset and this one are one helper, `depth_reset_pipeline`, for either
depth direction, and its passes are built by #6728's `solid_writes`. Unsectioned frames are unchanged. The CPU rasterizer already chose the cap by
true depth.
Tests (crates/gpu/tests/depth.rs), with the device's float depth and the 24-bit fallback:
- a_cut_hides_the_edges_behind_it (new): bherbruck's block cut at y = -16, home view, orthographic
and perspective. No edge shows through the cap, and away from the cut the picture is a box of
just the kept part's: 0 px orthographic and 1 perspective (main: 618 and 780).
- bherbruck's pocket and hub tests from #6363 are kept and pass (pocket 0 px; hub 1 and 2 px over
its twelve views, as with #6363's pass).
- an_edge_on_a_face_draws_whole_at_any_angle and
an_edge_just_behind_a_face_stays_hidden_on_a_large_design also run with a section shown.
In the app (safe mode, WARP), with 625 patterned cylinders cut by a section, the frame time is
that of main (#6363): 33.5 against 34.3 ms at the home view, 34.1 against 35.2 ms with the model
filling the view.
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6720
* Face pick by point: linear work budget, so bodies with many faces take a sketch (#6720)
A face picked by its point alone charged the whole mesh once per face, and
face_contains scanned every triangle for each candidate. A block with a
modelled thread (about 5 000 faces) went past the 2 000 000 limit. The
triangles are grouped by face once, each face's test reads only its own,
and the budget charges triangles + faces.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3812
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27
* Sketch Dimension: value box in the design's units (#3812)
A dimension added without a value restated what it measured as
"<value> mm", whatever the design's units. In an inch design the
Dimension tool's value box therefore opened at "25.4 mm" next to a
dimension whose text read 1.000 (inches).
Document::design_length writes a measured length in the design's units
("1 in"), with enough decimals to keep it to the micrometre, so a
dimension that restates the geometry still moves nothing. The Dimension
tool, AutoConstrain's dimensions and Toggle Driven (making a driven
dimension driving) use it. Millimetre designs are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27
* Move the design-units dimension tests into sketch_ux_tests (review)
The #3812 tests go in the existing sketch dimension test file rather than
a new file of their own (AGENTS.md, #3226).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The evaluation cache's 64 MB budget charged every cached feature result the whole model, though a
state shares every body it did not change with the state before it. A design whose model is a few
MB kept only its last few dozen results, so setting a parameter back recomputed what had dropped
out. Each result is now charged for the bodies and sketches it does not share with the state it
started from.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6550
* Crash reports: keep journaling through file.new and doc.open (#6550)
`Session::replace_design` swapped in the fresh session without its
`crash_journal` flag, and the app turns it back on only at its next frame.
So `file.new`/`doc.open` never recorded how they ended, the commands sent
after them in the same frame (a control-channel or MCP batch) were not
journaled, and a crash report then named `file.new` as the command in
flight. `replace_design` now keeps the flag, like the other session-wide
fields it keeps; only the design on screen has it set.
Test: `commands_right_after_a_new_design_are_journaled` (crash_tests.rs).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6917
* Tests: the six timing assertions do not depend on the wall clock (#6917)
Six tests asserted on the wall clock. Their result depended on how loaded
the machine was and not only on the code under test: they passed on an idle
machine and failed when the test binaries ran beside each other, which is how
the suite runs (`cargo xtask test` starts every test binary at once).
CONTRIBUTING.md:196 says it: "Tests run beside each other on a busy machine,
so a test must not depend on wall-clock timing."
The change is confined to the six test files the issue names:
- geom: the tangent chain of a helix is a ratio (750 pieces against 3 000)
instead of a limit of 200 ms.
- io: the placement budget is spent inside the reader, so the clock is gone.
- ui-egui: the classification of many faces is a ratio (900 against 3 600)
instead of a limit of 10 s.
- engine: the clearance measurement drops its 30 s limit; the boolean that
gives up reports itself.
- engine: the fillet beside a modelled thread is a ratio (a 1 mm thread
against an 8 mm one) instead of a limit of 30 s.
- ui-egui: the window frame budget goes from 250 ms to 20 s, the limit #6072
gave its own probe.
The helper is the one #649 wrote, copied into the crates that need it, with
the noise of a run as a parameter.
* claim: #6558
* Shortcuts: Ctrl+Shift+S opens Save As in the workspace (#6558)
The Home page already opened Save As with Ctrl+Shift+S, but the design workspace matched Ctrl+S, so the chord saved over the current file instead of offering another one. The workspace now routes the chord to Save As, and the File menu shows that shortcut next to Save As, taken from the command registry.
* claim: #6600
Co-authored-by: Cursor <cursoragent@cursor.com>
* Save an imported mesh that only fits after compression (#6600)
The design file limit was applied to the mesh before Deflate, so a mesh
that had already loaded could not be saved or autosaved.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix: validate and version large mesh saves (#6600)
---------
Co-authored-by: Colin Faulkingham <colinfaulkingham@Colins-Mac-mini.local>
Co-authored-by: Cursor <cursoragent@cursor.com>
* claim: #5679
* Top-level cut and join reach bodies in sub-components (#5679)
An extrude, revolve or press-pull from a sketch on a face of a body in a
component inside the active one now cuts or joins that body, moved or
turned, in its own component, so every placement shows the change. The
automatic operation probes that body where it is shown. A linked part, or
a face on a further placement of a part placed more than once, is refused
with the reason instead of a silent no-op (#5678).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6423
* test: a copied body must keep the look of the body it came from
solid.move with copy: true leaves the copy without the appearance, the
material or the face looks of the source body, so it renders with the
default look. The tests fail for that reason: the copy has no entry in
appearances.bodies, in materials or in appearances.faces.
* fix: a copied body keeps the look of the body it came from (#6423)
A move with `copy: true` pushed a new body but left it with the default look, so the copy came out a different colour than the part it came from. The copy now carries the body's appearance and its material, as the component copy already did.
* test: keep the copy regression to the body look and the material (#6423)
* test: each copied body keeps the look and the material of its own source (#6423)
Two bodies with different appearances and different materials, copied in one solid.move: each copy must keep the look and the material of the body it came from.
Scope of the fix: the look of the BODY and its material are carried over to the copy. The per-face looks are NOT carried over: a face look is keyed by the point on the face, so the copy's faces would have to be matched and their points translated, which is a separate feature.
A drag that isn't live walks to the cursor in steps, each a held solve
on its own budget seeded on the last solved state. Past a failed step
the walk keeps trying every step (a stretch the geometry can't follow
can be followed by one it can), and each failing solve runs the
numerical solver to its limit: one drag in a 65-command sketch took
7.7-9 s, most of it in failing solves.
A failed step leaves the sketch as it was, so the steps after it all
start from the same state and none changes what the next one sees.
They are now solved eight at once on all cores; those that fail in a
row are taken as tried and the walk goes on at the first that doesn't,
as it would one by one. The drag above takes 3.7-4.3 s and every
command's reply is unchanged. Live frames, whose steps share one
frame's budget, are left as they are.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6569
* Sketch: an offset slot can still be moved by the dimension that places it (#6569)
An offset arc is drawn round its source's own centre, and its ends are
held while the sketch solves (the offset is rebuilt from its source
afterwards). Its arc condition, both ends as far from the centre, then
only tied that shared centre, and the source arc with it, to the middle
of the held ends: a slot offset by 1 mm lost a degree of freedom, and
the length that places it was refused as conflicting.
The solver and the constructive reading now leave out the arc condition
of an offset arc round its source's centre (Sketch::offset_arc_follows_source),
as #4466 did for the Parallel between an offset line and its source. The
source's own arc keeps the centre; nothing changes without an offset.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a test for a rounded rectangle with an offset round it (#6569)
kaievns's case from the review: the offset's corner arcs tied each corner
centre to a 45 degree line, so the height followed the width and every
width change was refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6841
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
* Sheet metal: a pattern of a cut made in the flat is kept like the cut (#6841)
A rectangular, circular or path pattern of an extrude cut through sheet metal was refused
("this sheet machining cannot be preserved in its flat material"), though the cut itself is
kept as a cut-out of the flat pattern. The pattern replayed its copies through the generic
boolean, whose sheet check refuses any change the sheet model can't keep; the cut goes through
the sheet's flat machining first.
Each copy of an untapered extrude cut is now machined into the sheets the same way, in its
moved sketch plane (a moved copy keeps the extrude's prism certificate), and then cut from the
other targets. A copy that meets a folded bend is refused as the cut is there. Mirrored copies
(the sketch plane turns over) and patterns of an intersect (which cut with the union of their
copies) keep the generic path.
Fixes#6841.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5098
* Sketch: deleting part of a link breaks off the rest instead of rebuilding it (#5098)
Deleting some of a link's curves left the rest linked. The next refresh saw a
different layout and rebuilt the whole link as normal geometry: the deleted
curve came back and the others lost their construction flag (a projected arc
returning as a solid arc, a projected face's lines turning solid).
sketch.delete now breaks the link for what remains, as Break Link does: those
curves stay where they are and keep their flags. Deleting a whole link, and
text links, are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq
* Move the #5098 tests up in sketch_project_tests.rs
They sat at the end of the file, where main has since added other
tests; moving them next to the break-link test avoids the merge conflict.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5853
* Batch: refuse a step that would fail at its turn before the first step runs (#5853)
engine.batch and the MCP batch tool checked only a batch's shape up
front. A misspelled command id in a late step was found at its turn,
after every earlier step had run, and then all of it was rolled back: a
160-step batch with a typo as its last step ran for a minute and
changed nothing.
solidcraft_engine::batch_preflight::check finds, before anything runs,
the first step the batch would certainly refuse at its turn: a step
without a command, an unknown command id (the error names the closest
ids, as at the step's turn) or, with strict parameter checking, a call
that breaks its command's typed contract. Anything that depends on the
design is left to the step's turn.
- engine.batch (control channel) checks against the app's registry and
its session's level; view.pick, which the app answers itself, passes.
- The MCP batch tool checks when the commands run in its own process
(headless, with --param-check from the backend). A running app may be
another version with other commands and checks the batch itself; its
reply's not_run is passed on.
- The refusal is the failing step's reply with completed 0, undone 0,
not_run listing every step and a note.
Tests that used an unknown command only to make a late step fail now
use a step that fails at its turn (a bad extrude distance), so they
still test rollback, timings and file.new as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq
---------
Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6211
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Joints: a loop whose axes are a hair out of parallel still moves (#6211)
Holes picked on parts are rarely exactly in line. A closed loop through
axes a few hundredths of a microradian apart (a lever, link and a rod on
a cylindrical axle) can't close exactly: it closes to nanometres, and the
gap grows as it turns. The loop solver wanted 1e-7 mm, so it threw such a
closure away (the loop stayed open, its parts at 0 dof) or stopped a drive
or drag after a fraction of a degree.
The conflict check is now 1e-4 mm / 1e-6 rad (it was below what its
message can show), and joint.drive / motion and joint.reach close the
loop at each step as at the start: to the tight tolerance where they get
there, otherwise within the conflict check.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #2175
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Body rename: an imported assembly's other bodies keep their names and components (#2175)
An Import keeps its body names by the file's body index, and builds no body for the
file's later instances of a repeated part (`skip`). Renaming a body stored the names by
the body's place in the model instead, so every name after the first skipped instance
landed one slot early (and the new name could land on a skipped slot). The rename looked
right until the design was rebuilt; then those bodies took other names, dropped out of
their components and showed up loose in the import's top component.
`Feature::body_name_slots` maps the bodies a feature builds to their stored slots, and
`Feature::pin_body_names` stores current names through it. The rename, the pinning of
later features' names (rename and suppress) and `Document::body_rename_from` use them.
Fixes#2175
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6348
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: constrain to an edge of any body, a mirrored copy too (#6348)
A constraint tool ignored a click on a body edge, so only edges already in
the sketch (the face it sits on) could be constrained to; a mirrored copy's
edges never were. Constraint commands now take a model edge or vertex
({edge|vertex: [x,y,z], body?}) for an operand and project it first, in the
same undo step, and the pick tools pass a clicked edge or vertex that way.
The link keeps the edge's persistent name, so the constraint follows rebuilds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6646
* Control channel: document.revision, a design revision and a document id (#6646)
A program that follows the open design asks document.revision and exports
only when the answer moves: document_id names the open design (kept through
edits, saves and renames, another for each design started or opened, never
shared between two tabs or two runs) and revision moves whenever the design,
what is hidden or an uncaptured component position changes. It stays put on
reads, selections and view changes, unlike the session's view revision.
The revision is read lazily: the session remembers the design it last
reported (held weakly, so Arc::make_mut can never change it in place and its
address can't be reused) and takes a new number from one counter for the
whole run when the design is another one. The control method answers at once,
also while a slow command computes; engine.execute reaches the same command
for scripts and MCP.
* document.revision: hash the run's id prefix with the process's random keys
A clock set before 1970 gave every run the prefix 0, so a restarted app could
answer a new design with the id and revision of the old one. The docs no
longer promise an answer at once: a screenshot waiting for an opened design to
be meshed still holds the requests behind it.
* document.revision: its label in the complete catalogs (ja, zh)
* claim: #6985
* Control channel: control.subscribe and design.changed events (#6985)
A connection that sends control.subscribe gets the active design's id and
revision in the reply (as document.revision answers), then a
{"event":"design.changed","params":{document_id, revision}} line whenever
either changes, so a live link need not poll.
The window publishes the design at the end of each frame's logic and
drawing while a connection is subscribed (one atomic load otherwise). Each
subscribed connection waits on that from a thread of its own and writes
the latest after a 100 ms gap, so a burst of changes is one line. Replies
and events share one lock per connection, each written whole (#6390).
* control.subscribe: the reply before any event, a second one refused
The events thread started before the subscribe reply was written, so a
change right after the window's answer could reach the client before the
reply that named the older revision. The subscription now starts holding
the connection's line lock and writes the reply under it.
A second control.subscribe on a subscribed connection is refused on the
connection itself: its answer could arrive behind a newer event. When no
thread or socket is left for the events, the reply says it did not
subscribe instead of ok.
* control.subscribe: a second one does not lose a finished late reply
The already-subscribed answer came before the busy check, so a request that timed out and had finished since lost its reply: control.pending then said the app ended it without one. It now comes after the busy check and drops a finished late reply as every other request does.
* control_server: declare the subscribe guard at the top of the loop
Clear of the lines #6643 changes (its token check moves to where the declaration was).
* control_server: the subscription's items beside serve
Away from the lines next to send, where #6643 adds token_of.
* control test: New on a blank design reuses its tab, so redo the box first
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
* claim: #617
* fix(sketch): manual Horizontal/Vertical between a circle centre and an edge (#617)
The manual H/V tool silently did nothing when a point and a straight line
were picked or selected together (only two points or a lone line worked),
while auto-constrain inference applied the alignment. A point picked or
selected with a straight line now aligns the point with the line's
midpoint, in the mode the line's dominant axis suggests, through the
existing midpoint alignment in sketch.constraint.horizontal_vertical.
- tools: constraint_preselection consumes [point, line] selections; the
interactive tool applies the alignment on the second pick (a line).
- context menu: Horizontal/Vertical Constraint items for point + line.
- engine + ui regression tests pin centre-edge alignment and the
edge-to-centre dimension from #617.
Written by Qwen.
* style: formatting cleanup for #617 files
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* Extend: join a stop that is already another curve's end
sketch.extend refused a target that coincided with another curve's end
("the extension target coincides with existing geometry") instead of
extending onto that point. The stop is now joined: a new line ends on the
existing point, and a free end grows onto it held by a Coincident. The
preview shows that stop too, so the line it draws is the line the click adds.
A stop at the end of a spline or conic joins that end the same way, and
extending an infinite line now refuses instead of moving one of its two
points.
🤖 Generated with Codebuff
Co-Authored-By: Codebuff <noreply@codebuff.com>
* Extend: close an arc, take an equal stop, preview with the command's search
An arc with nothing on its path now grows all the way to its own far end and
closes into a whole circle instead of reporting that there is nothing to
extend to.
Two curves stopping the extension equally far are both on the way, so the first
stop is taken instead of refusing to choose between them.
The line preview and the command now share one stop search (`line_aim`), so the
preview can no longer draw a line the click refuses.
---------
Co-authored-by: n0tfr3shm1lk <n0tfr3shm1lk@ukr.net>
Co-authored-by: Codebuff <noreply@codebuff.com>
* claim: #1994
* plastic.snap_fit: base_height and new_body options (#1994)
Base Height extends the snap fit's base below the picked face; New Body
makes the snap fit its own body so it can be patterned or moved. Both
optional, serde-defaulted, old designs replay identically.
* ui: snap_fit length-field defaults list gains the optional base height
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* Browser: a feature row edits its profile sketch, suppresses and rolls back
A sketch button on feature rows with a profile sketch, and the feature menu gains
Edit Profile Sketch, Suppress/Unsuppress and Roll Back Here. Features behind the
history marker or suppressed are drawn faint, as in the timeline.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: the sketch button sits right after the feature's name
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6545
* cli_link: the Unix-only link code and its test build on Unix only, so the UI crate builds on Windows (#6545)
slot() is used only by link_in's Unix version, and links_only_where_it_may
makes its own link with std::os::unix::fs::symlink; gate both like link_in.
On Windows the test failed to compile (E0433) and clippy -D warnings flagged
slot as dead code.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>