Commit Graph

15 Commits

Author SHA1 Message Date
Homero Thompson 7e8f87dc57 Extrude: a face shared by two bodies is resolved in the active occurrence (#419) (#6469)
* claim: #419

* fix(#419): a face shared by two bodies is resolved in the active occurrence
2026-10-28 14:13:45 +00:00
dudedagger42 262f5c61c0 Move, Align and previews on placed components (#4455)
* Move and Align on placed components: picks and vectors where they are shown

A body in a component placed away from its own frame (an imported part
set upright) moved the wrong way: Move's vector, axis and pivot were
taken in the root's frame, so moving the upright plate up moved it along
its own frame's z. They now turn with the frame of the bodies moved.

Align mapped each pick into the frame of the body under it, so aligning
two separately placed parts mixed two frames (the plate landed at right
angles), and its snap points were never mapped at all. Align now finds
its picks, face normals and snaps where the view shows them and takes
both ends into the moved bodies' frame.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Preview: a feature's tool is drawn where its component is shown

Extrude, revolve and the primitives preview their tool on its own. That
preview was built in the model's frame, so on a component placed away
from it (an imported part set upright, edited with its component
active) the tool showed at right angles to the picked face, though the
feature itself came out right.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Follow main's lazy body frames and first-part grounding in the placed-component work

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-26 03:28:14 +00:00
raykholo 44bd29acc3 Hole: refuse a position that isn't on the face (#5024) (#5029)
* claim: #5024

* Hole: refuse a position that isn't on a face (#5024)

`solid.hole` took any `position` and drilled from the nearest face, so a
point 1 mm past a box's side was accepted and cut a hole across the edge.

A position given as a point (numbers or length expressions) must now lie on
a face of a body, within the same tolerance the plastic features use for
their placement (the check is shared with them). Holes at sketch points are
unchanged.

* Hole: a position over the mouth of a bore or opening of a planar face is on that face (#5024)

A counterbore is centred on an existing bore, in the plane of the face round it.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-25 17:42:15 +00:00
Matthew Knutson 453c6bcb14 Split schema contracts per command file and add shared field types (#2829) (#3558)
* Split the schema contracts into one module per command file

`schema/commands.rs` becomes `schema/features.rs` (solid.box, solid.extrude,
FeatureResult) and `schema/inspect.rs` (engine.describe), each with its own
tests file holding its `schemas_and_the_key_check_agree` key lists and its
`strict_keeps_todays_errors` cases, so conversions of different command files
touch different files. The shared loops become helpers in `schema/tests.rs`;
the assertions are unchanged. `engine.describe` gains a key-list test, and
`schema_defaults_are_valid` now covers every command with a contract.

No behaviour change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Add shared schema field types for the next conversions

For the feature commands to be converted next, each deciding acceptance with
the reader the handlers already use:

- `FaceRef` and `FaceRefs` (`face::face_ref`, `features::face_points`)
- `EdgeRef` and `EdgeRefs` (`features::edge_points`)
- `SketchRef` (`features::sketch_id`)
- `FeatureCommon`: `name`, `body_name`, `body_names` and `participants`,
  which `add_feature` reads for every feature, flattened into a contract
  with `deserialize_with = "feature_common"`, which keeps the key in the
  message and the issue's path.

The shape checks of `face_ref`, `edge_points` and `sketch_id` (and
`feature_sketch`) move into pure helpers (`face_ref_form`, `edge_ref_form`,
`sketch_key`) that the handlers and the types share; the handlers behave as
before. Tests check that each type and its schema accept what the reader
accepts (apart from a face name's byte cap and an index written `1.0`),
that the contract's messages match the handlers' errors, and that the
handlers still look picks up one at a time.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:54:13 +00:00
Koschtetnix 487aa64e10 Multi profile extrusion performance (#2064)
Thanks @Koschtetnix.
2026-10-17 18:30:52 -04:00
Karl Von Richter 8a6332be83 Fix face Extrude Join targets in assemblies (#1375)
A new face-based Extrude Join (and outward Press Pull) joins the picked face's body by default and stores that scope, so an edge-touching neighbour is no longer tried first or absorbed. Explicit targets and participants still win. Related to #226.
2026-10-15 08:33:48 -04:00
NOWN-DEV 5c6f70cc00 Faces by name in the face commands; model.faces gives a point on each face (#1243) 2026-10-14 20:18:13 -04:00
Mqrius a513304917 fix(engine): pick the face of a named body where bodies meet flush (face_body) (#710)
Extrude and Revolve from a body face take `face_body` to say whose face is meant where faces of several bodies meet flush at the picked point. Without it, an ambiguous pick now names the bodies that meet there instead of saying there is no face. Fixes #703.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 10:51:57 -04:00
bherbruck 296683229d Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)
* WIP deep rename (not for push)

* WIP2

* WIP3

* WIP4 wxs fix

* rustfmt

* Rename the remaining identifiers in merged crash-report code

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 17:17:01 -04:00
bherbruck a6bb8fc924 feat: stabilize face attachments and closed spline workflows 2026-10-11 05:32:46 -04:00
bherbruck d10312b7fd Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs
The old ids live only in crates/engine/src/legacy_ids.rs (the legacy migration table): find_command maps them, so old scripts, recipes and control calls keep working, and saved shortcuts, recent and pinned commands are migrated on load (designs store no command ids). Parity maps the observed catalog ids to ours through xtask/data/fusion-ids.tsv. The agent rule now reads: our own dotted id, never another product's. Cargo.toml's repository points at github.com/bherbruck/solvecraft.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-09 12:17:23 +00:00
bherbruck 06186be555 Press Pull on a fillet's or chamfer's face edits that feature's size by the distance (found through the face's persistent name); on another curved face it offsets the face, with the rest of its surface (both halves of a hole's wall)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 13:39:34 +00:00
bherbruck 2ec34c6e78 Sketches on body faces follow their face: the plane is a face reference found again on each evaluation (same normal, nearest the picked point), and face extrudes (Extrude on a face, Press Pull) use the linked projection of the face's edges instead of a frozen copy, so they follow when earlier features change
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 07:42:31 +00:00
bherbruck b2b9331415 Drag manipulators and automatic operation: extrude (two arrows when symmetric), fillet/chamfer, shell and move arrows drag their value with round-step snapping (Alt/Ctrl: free) and the dialog follows; Extrude operation "auto" (engine) and the dialog follow the geometry: into a body cuts (red), out of one joins, free space makes a new body; a manual choice sticks
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-07 21:58:43 +00:00
bherbruck 7ef3426cb3 Keyboard-first commands: E/F/H open with the on-canvas value box focused as soon as the geometry is picked (typing replaces the value, Enter applies, Tab moves on, Esc cancels), extrude direction arrow; Extrude takes planar body faces (face: [x,y,z] copies the face boundary into a sketch), so select-face-then-E press-pulls; join/cut previews show the tool body (cut see-through red)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-07 21:23:47 +00:00