Commit Graph

79 Commits

Author SHA1 Message Date
Vadim Kalinsky 59cad5f0bb Colored components (feature request #2507) (#2877)
* feat: add colored components inspection toggle

* feat: persist component colors and add cycling controls

* feat: assign component colors in creation order

* fix: update component color menu integration and translations

* fix: proper description for pending format change.

* fix: deleted duplicated format change description from docs/pending.

* Compare the component colour counter in the features-only check

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Vadim Kalinsky <vadim@kalinsky.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:11:03 +00:00
raykholo 0344a41dc4 Open and insert a DXF outside a sketch (#2052) (#4635) 2026-10-25 21:03:31 +00:00
Frank a402c5e502 Snap points: the centre, middle and ends an edge or face offers, in the engine (#5881) (#5882)
* claim: #5881

* Snap points: the centre, middle and ends an edge or face offers (#5881)

Phase 1 of #5881. `solidcraft_engine::snap::snap_points` gives the points
a picked item offers as picks, from Measure's exact shapes: a round edge
its centre (an arc also its ends and exact middle, joined across pieces
the kernel split it into), a straight or other edge its ends and middle,
a flat face the centre of its area, a cylinder or cone the centres of its
ends, a sphere or torus its centre, a vertex itself. Nothing uses them yet.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:48:29 +00:00
NOWN-DEV c0640cb95e inspect.parameter_sweep: check a design across a parameter's range (#2273) (#2276)
* inspect.parameter_sweep: check a design across a parameter's range

Rebuilds a copy of the design at each value of a parameter and reports what
no longer holds compared with the design as it is: features that fail or
warn, joint origins that are lost or turn over on their own part, sketch
planes that turn over, and sketch solves that fail or fold. The design is
not changed; each value's rebuild time is reported too.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* inspect.parameter_sweep: params doc matches what it takes and returns

`steps` takes at most 199 (200 values), as the check says; failed and
warned entries carry the feature's name; a lost origin says which one; a
value the parameter refuses gives {value, ms, ok: false, error}. The
refusal test covers steps 200.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* inspect.parameter_sweep: Japanese and Chinese labels

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Aac7mP9rthK3WsPpPRvCsF

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-25 01:19:00 +00:00
n0tfr3shm1lk 4e6939b5cf Extend: extend a free arc in place and add the line the preview draws (#4615) (#4618)
* Slightly fix the extend tool

* Extend: add the line the preview draws, and stop an arc on another curve

sketch.extend reported "nothing to extend to" whenever nothing stood in the
line's way, even though the viewport previewed a line past its end; with
nothing in the way the extension now runs as far as the preview shows, on the
same measurement, so the click adds what was drawn.

An arc extension that ran into another circle or arc refused the target when
its crossing already belonged to another curve's end (a shared crossing point
of two circles): that point is now joined instead, so the extension closes onto
the geometry that is there.

---------

Co-authored-by: SolidCraft Dev <dev@solidcraft.local>
Co-authored-by: n0tfr3shm1lk <n0tfr3shm1lk@ukr.net>
2026-10-24 20:46:44 +00:00
Sandmann 8cbde001ef Front … Isometric View commands, Ctrl+1…7 by default (#5057) (#5058)
* Ctrl+1…7 turn the view to the standard views (#5057)

Front, back, left, right, top, bottom and isometric, handled with the
other view keys beside Ctrl+8: animated like the view cube, reserved so
no command can take them, and ignored on the flat pattern page.

* Front … Isometric View are commands, Ctrl+1…7 their default keys (#5057)

The standard views become seven commands (view.front, view.back,
view.left, view.right, view.top, view.bottom, view.isometric) whose
default shortcuts are Ctrl+1…7, instead of keys the window handles
itself. They show in Keyboard Shortcuts, can be moved to other keys or
cleared, and the digits can be given to other commands. In the app they
turn the view as the view cube does; headless they set the session
camera, keeping target, distance and projection.
2026-10-24 20:46:18 +00:00
Karl Von Richter 27d2fe6ec0 Frames: profile library, members along frame sketch lines, and the Frame Member dialog (#4003) (#4004)
* claim: #4003

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Frames: the profile library (#4003)

The first slice of frames and weldments: the cross-sections structural members
will be made of, each SolidCraft's own parametric definition built in code
(no vendor or standard size tables are shipped).

- solidcraft_doc::frame: bar, round bar, rectangular and round tube, angle,
  channel, I-beam and a generic T-slot extrusion as exact line/arc regions,
  with defaults worked out from the profile's size, refusals that name the
  dimension that does not fit, anchors and placement, and exact section
  properties (area, centroid, Ixx/Iyy/Ixy by Green's theorem).
- frame.profile.list, frame.profile.properties (with mass per metre for a
  density) and frame.profile.insert (draws a profile into a sketch, locked by
  default, at a point, anchor and angle).
- Tests against hand-computed values (rectangles, circles, composite
  rectangles by the parallel-axis theorem, fillet spandrels), hostile input,
  extrusion volume, undo; catalog entries in every locale; docs/frames.md;
  ROADMAP M15.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Frames: drop the built-in T-slot profile (#4003)

Aluminium extrusions and other vendor sections come from the user's own
sketch (drawn or inserted from the vendor's DXF), so the library keeps the
plain steel shapes only.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Frames: members along frame sketch lines (#4003)

frame.member lays one body per straight line of a frame sketch (2D lines or
3D sketch lines), its cross-section square to the line from end to end:

- profile: a built-in profile, or profile_sketch, a sketch whose material
  (nested loops alternating, so two circles make a tube) is the section in
  its own x and y around its origin; profiles picks override it.
- anchor (origin, centre, centroid or a bounding-box corner or edge middle),
  angle (an angle expression, so a parameter), mirror.
- Orientation: the profile's y as near world up as the line allows, x
  square to both; a vertical member's x is world X (frame::member_axes).
- Members follow sketch and parameter edits, undo as one step, save and
  reopen (format: pending/frame-members.rs), and are named after the profile
  (Rect Tube 40x40x3, (2)…), numbering on past names already taken.

Tests against hand-computed volumes and bounding boxes (rectangle, 3D
tower lines, parameter edit, sketch tube profile and picks, anchor/angle/
mirror), refusals, undo/redo and reopen; walk fixtures and goldens; docs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Frames: fixes from the adversarial review (#4003)

- Default member lines are what was drawn: projected and other linked curves
  and 3D wires (a face sketch's edges) and lines of no length are left out.
- A profile sketch's material starts from its drawn profiles, as
  solid.extrude's "all" does, so a section sketched on a face works; the
  even-odd test uses outlines and boxes worked out once, capped at 256.
- Member names are pinned to their lines (`names`, by line id; `body_name`
  is the base): deleting or adding a line, or deleting another feature, no
  longer renames other members, and frame.member stores every name it gives.
  body.rename renames a member on its line (also for later member features);
  a copy whose body_names were set still names its members by position.
- Built-in profile dimensions are expressions (ProfileSpec): they follow
  parameters, bare numbers take the design's units, and they are feature
  inputs. frame.profile.properties/insert read them the same way.
- Default root/toe radii shrink to the room a thick section leaves; radii
  given are checked by name; a radius must be 0 or at least 0.01 mm; error
  messages report the wall or flange value given, not twice it.
- A line within 1e-6 rad of vertical orients as vertical, so rounding never
  turns a post a quarter turn.
- A 2D frame sketch in a differently placed component is mapped into the
  member's frame, and member features recompute when placements change.
- Caps before lookups for a design's `lines`; a line listed twice is
  refused; a 3D wire that runs back on itself is not a line.

Regression tests for each, from the review's scenarios.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Frames: the Frame Member dialog on the ribbon (#4003)

- Frame Member (MODEL > Create) opens a dialog: the frame sketch's lines
  picked in the view (or All Lines), a built-in profile and its dimensions or
  a section picked in another sketch, anchor, angle, mirror and name, with a
  live preview. Edit Feature reopens it filled in.
- Lines picked in the view keep their sketch (a SKETCH_LINES input picks
  ExternalSketchCurve): line ids are each sketch's own, so two 3D sketches
  both have a `w2`, and the members went on the newer sketch's lines.
- timeline.redefine takes frame.member. Members keep their names through an
  edit unless it gives them a new body_name; frame.member takes `names`.
- A member whose section is a whole profile sketch keeps it when edited
  (the dialog shows the sketch instead of picking every region, which would
  fill a tube's hole).
- An original frame_member icon, open for review, on the ribbon, timeline
  and browser.
- The angle profile is listed as L-Angle, and web and flange as Web/Flange
  thickness, so they translate apart from the existing Angle, Web and Flange;
  the dialog's labels are in en, ja and zh. en-GB no longer repeats the frame
  command labels it spells the same.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 14:22:41 +00:00
Colin Faulkingham 3b982ca371 Prevent deleted item IDs from being reused (#1016) (#3641)
* claim: #1016

* Prevent deleted design item IDs from being reused
2026-10-22 18:31:39 +00:00
raykholo ba4f7864ff Export Current View as DXF includes shown sketches (#3708) (#3780)
* claim: #3708

* Export Current View as DXF includes shown sketches (#3708)

The view export refused a design with only a sketch and left shown
sketches out when bodies were present. It now draws the sketches the
viewport shows (profile curves only: no construction geometry, points,
dimensions or constraints) on a SKETCH layer, one entity per curve.
Finished sketches are hidden behind bodies through the body-edge
occlusion; the active sketch is drawn on top, as in the viewport.
Sketch points use the same projection, budgets and cancellation.

The export is refused only when there is neither a visible body nor a
shown sketch curve; the dialog and the command share that check
(cmd::view_dxf_exportable).

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 23:09:57 +00:00
Matthew Knutson 453c6bcb14 Split schema contracts per command file and add shared field types (#2829) (#3558)
* Split the schema contracts into one module per command file

`schema/commands.rs` becomes `schema/features.rs` (solid.box, solid.extrude,
FeatureResult) and `schema/inspect.rs` (engine.describe), each with its own
tests file holding its `schemas_and_the_key_check_agree` key lists and its
`strict_keeps_todays_errors` cases, so conversions of different command files
touch different files. The shared loops become helpers in `schema/tests.rs`;
the assertions are unchanged. `engine.describe` gains a key-list test, and
`schema_defaults_are_valid` now covers every command with a contract.

No behaviour change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Add shared schema field types for the next conversions

For the feature commands to be converted next, each deciding acceptance with
the reader the handlers already use:

- `FaceRef` and `FaceRefs` (`face::face_ref`, `features::face_points`)
- `EdgeRef` and `EdgeRefs` (`features::edge_points`)
- `SketchRef` (`features::sketch_id`)
- `FeatureCommon`: `name`, `body_name`, `body_names` and `participants`,
  which `add_feature` reads for every feature, flattened into a contract
  with `deserialize_with = "feature_common"`, which keeps the key in the
  message and the issue's path.

The shape checks of `face_ref`, `edge_points` and `sketch_id` (and
`feature_sketch`) move into pure helpers (`face_ref_form`, `edge_ref_form`,
`sketch_key`) that the handlers and the types share; the handlers behave as
before. Tests check that each type and its schema accept what the reader
accepts (apart from a face name's byte cap and an index written `1.0`),
that the contract's messages match the handlers' errors, and that the
handlers still look picks up one at a time.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:54:13 +00:00
Matthew Knutson 953fd7d5f8 Typed parameter contracts and JSON Schemas for solid.box and solid.extrude (#2829) (#2611)
* Spike: typed parameter contracts and JSON Schemas for solid.box and solid.extrude

The schema RFC's spike (plan/schema-spike.md). solid.box and solid.extrude get
typed contracts with generated JSON Schemas (2020-12), checked in front of the
unchanged handlers by a per-session level: off (the default, which changes
nothing), warn (the call runs and gains param_warnings) or strict (the call is
refused and the design left alone). Also engine.describe and the MCP tool
describe_command, `solidcraft-cli mcp --param-check off|warn|strict`, a
FeatureResult type for feature replies, and an env-var audit recorder
(SOLIDCRAFT_PARAM_AUDIT) used to check the contracts against every test.

Local spike branch; not for upstream as is (see the results report).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Parameter contracts: put the audit recorder behind a feature; drop two ignored test keys

The audit recorder is now on only in a build with the engine's `param-audit` feature
and `SOLIDCRAFT_PARAM_AUDIT` set. Its code is still compiled, linted and tested without
the feature. `scripts/param_audit.py` summarises a test run's audit logs, and the schema
module's docs give the steps for converting a further command.

Two tests passed keys their command ignores, which the audit found: `position` on
`solid.box` (`hole_face_tests.rs`) and `symmetric` on `solid.extrude` (`face_tests.rs`).
Both are removed, so the tests build what they always did. Comments no longer call
the contracts a spike.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 10:45:08 +00:00
phanoob a9f621837f Sketch Trim: the hover shows the piece that will go, not the whole curve (#3052) (#3113)
* claim: #3052

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch Trim: the hover shows the piece a click takes away (#3052)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch Trim: the piece is shown in the error colour, thicker

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Trim hover: preview keeps its doc line; the piece is worked out once a frame

The new function had gone between preview's doc line and preview. The
cursor's Trim piece is now kept by design revision, sketch, curve and
cursor, so the viewport's hover and the preview no longer both intersect
the curve with every other curve each frame.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-19 17:59:39 -04:00
NOWN-DEV 02c77df5f7 inspect.clearance: mesh each body once per check instead of once per pair (#2867)
* inspect.clearance: pairs whose bodies did not change are not measured again

Each clearance check measured every close pair again, though between two
checks usually only a few bodies change or move. Results are now kept per pair,
keyed by both bodies' geometry and placement and the check's settings; a pair
whose two bodies are unchanged is taken from that cache. With 40 overlapping
parts, a check after moving one of them took 0.8 s instead of 23 s (741 of 780
pairs reused). Pairs that could not be worked out are tried again each time.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* inspect.clearance: boxes and placed keys exactly as before the reuse

The pair boxes are taken over the mesh's triangles with finite corners, as a
distance shape's are, so pruning is unchanged. A placed body's identity now
includes its model body's own frame, so two placements are never mistaken for
one another.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* inspect.clearance: a large body is meshed once for all its pairs

Each pair that touches cuts the larger body down to the pair's region with a
kernel boolean, and that boolean meshed the whole body twice: once for its
checks and once inside the intersection. A sheet with 600 faces paid about
2.5 s per pair for meshes that were the same every time.

A body can now keep its meshes for reuse (Body::keeping_meshes); its booleans
take the meshes from there, and the intersection takes its shell meshes
from there too (truck-shapeops: and_with_history_meshed). Clearance uses such
copies for one check. Results are unchanged to the bit. On a 3 x 2 m sheet
with bends and 300 holes, the clip took 0.23 s per pair instead of 2.6 s, and
24 rivets took 5.6 s instead of 16.5 s.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:14:24 -04:00
NOWN-DEV 99d8d382b9 Bill of materials: part properties on components and assembly.bom (#1888) (#1899)
* Bill of materials: part properties on components and assembly.bom

A component definition now carries part properties (part number,
description, revision, other tools' keys) and free text properties,
saved with the component and shared by its occurrences.
component.metadata and component.metadata.set read and change them in
one undo step; Paste New copies them; parts.insert numbers standard
parts from their standard and size, and parts.resize renumbers them.

assembly.bom counts the placed components (flat: parts at any depth
through their subassemblies; top: direct children), grouped by part
number or by definition, sorted by part number, and writes CSV (fixed,
quoted columns) or JSON. The app gets a Bill of Materials window on the
INSPECT panel that lists, edits and exports the rows.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Bill of materials: name a merged row's equal definitions once

Two standard parts with the same size are separate definitions with the
same name; their row now reads "SHCS M6x20" instead of repeating it.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Window widths test: close the Bill of Materials window between commands

The test closes the floating windows a command opens before starting
the next one; the Bill of Materials window was left open and measured
against the next dialogs' limits.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Bill of materials: sub-parts in their part's row, and part properties without re-evaluating

assembly.bom takes group_children: true. A part with a part number keeps
what is placed inside it (a bolt's washer and nut) in its own row, listed
under it as children (items 1.1, 1.2, with each and count) instead of rows
of their own; bolts with different contents stay different rows, and
total_occurrences is the same either way. The window has a switch for it
and shows the children under their part; the CSV lists them after their row.

Changing part properties re-evaluated the model, re-seated every joint and
rebuilt the placed model: 361 ms per change with 30 jointed bolts. A change
that only touches components' metadata and properties now takes the same
path as a render-only change (proved on the whole Document), also for its
undo and redo: 0.6 ms.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Bill of materials: look the structure up once, not per subassembly

Deciding whether a subassembly is a part (it has bodies of its own) scanned
every body of the model for each subassembly, and each body looked up its
feature by a linear search of the timeline: subassemblies × bodies × features.
assembly.bom now indexes the placements, the body owners
(Document::body_owners: one pass over the bodies with the timeline in a map,
the same rule as model_body_component) and the numbered components once per
call. 600 bodies and features with 60 subassemblies: 8.1 ms → 1.3 ms; the
old cost grows with the cube of the design's size.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:04:39 -04:00
SS-EN 771f62be71 Interference: clear apart pairs from their meshes, intersect the rest in parallel, time budget (#2895)
Thanks @SS-EN.
2026-10-19 09:14:52 -04:00
H. Conrad 4e0601611c Fix id overflow (#1589)
Thanks @Ian-cmd-ops.
2026-10-18 06:53:57 -04:00
JIJINBEI 2acc344aa4 Sketch: show open and untied profile ends (#2000) (#2001)
Thanks @jijinbei.
2026-10-17 18:52:12 -04:00
franco michetti b7eac9220b inspect.silhouette: the outline of bodies seen from a view, as a mask (#1743)
Thanks @onembyte.
2026-10-17 06:56:25 -04:00
NOWN-DEV 186555dbe9 Clearance report: overlaps, near pairs and nearest bodies (#1900)
Thanks @NOWN-DEV.
2026-10-17 04:54:39 -04:00
bherbruck 2c020dbcbc Revert #1682 (three-axis milling) (#1715)
Thanks @bherbruck.
2026-10-16 09:02:19 -04:00
CypherNaugh_0x 737c9358d0 Add three-axis milling with independent CAM and Fusion validation (#1682)
Thanks @CypherNaught-0x.
2026-10-16 08:26:28 -04:00
midasdf 8207f29fc0 Register surface.boundary, which the 2/3 squash left unregistered (#1701)
Thanks @midasdf.
2026-10-16 07:26:12 -04:00
DuBearte 4d58d3bbca Extrude: to an object through the body, the automatic operation is Cut (#1633) (#1636)
Thanks @DuBearte.
2026-10-16 06:26:35 -04:00
midasdf 07da7f8065 Class-A surfacing 2/3: surface match, boundary patch and CV fairing (#1487)
Thanks @midasdf.
2026-10-16 03:26:20 -04:00
Karl Von Richter 9422853cf9 Feature mirrors and patterns: preserve replay and add Flip/Center placement (#1619)
Thanks @Karl-VonRichter.
2026-10-16 03:01:00 -04:00
cronos c361630954 Export the current 3D view as 2D DXF with optional hidden lines (#1449)
Adds File > Export > Current View as DXF: the visible bodies projected from the current camera onto 2D LINE/LWPOLYLINE entities, with hidden edges omitted or dashed.

Co-authored-by: cronos <19868002+crono2250@users.noreply.github.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-15 20:04:25 -04:00
bherbruck 843c548589 Copy, cut and paste sketch geometry (Ctrl+C/X/V, context menu) (#1500)
* Copy, cut and paste sketch geometry (Ctrl+C/X/V, context menu)

Sketch geometry had no copy or paste: Ctrl+C / Ctrl+X / Ctrl+V arrive as
clipboard events that nothing handled, and the sketch context menu had no
Copy, Cut or Paste.

- sketch.copy / sketch.cut / sketch.paste: lines, arcs, circles, ellipses,
  splines, conics, points and text. Constraints and dimensions wholly among
  the copied entities come along (each dimension gets its own parameter
  with the same expression); ones that reach outside, fixes and pattern or
  offset relations are dropped. Paste goes centred at `at`, by
  `translate`, or offset from the original (same sketch) / at the same
  coordinates (another sketch, on its plane). One undo step; the pasted
  geometry is selected.
- Ctrl+C / Ctrl+X / Ctrl+V in a sketch (paste at the cursor), and Cut,
  Copy and Paste in the sketch context menu. Outside a sketch Ctrl+C /
  Ctrl+V copy and paste the selected timeline features. A copy also puts a
  line of text on the system clipboard so the next Ctrl+V is delivered.

Fixes #1480

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Keep a pasted text's height and angle expressions, drop its place's

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-15 15:55:10 -04:00
NOWN-DEV d0a4443939 inspect.compare: where two versions of a part differ, without a boolean of the two (#1423)
New command inspect.compare {a, b, tolerance?}: measures of both and their differences, two-way surface deviation from a bounding-volume tree, regions beyond the tolerance clustered by side (only_in_a / only_in_b) with integrated volumes and faces, a verdict, optional face colouring as one undo step, and warnings for open meshes. Geometry in solidcraft-geom (compare.rs), command in the engine. Closes #1363.
2026-10-15 12:45:43 -04:00
bherbruck 1744fbb262 Measure: centre-to-centre for holes, diameters for circles and arcs, slot sizes (#1392) (#1419)
Measure now reads the picked item's exact shape (cylindrical faces, circular and arc edges,
sketch circles, arcs and lines, profiles, planes, points):

- A circle, hole or arc shows Ø, R and its length (circumference, or arc length and angle).
- A slot (a sketch profile, or a half-cylinder end of a slot in a solid) shows its width,
  centre-to-centre length and overall length.
- Two items where one is round measure from the centre or axis by default (axis to axis,
  axis to plane, edge or point), with the closest and farthest distances listed too; the
  panel switches between centre, min and max, and the canvas line follows.
- inspect.measure and MCP `measure` (new `items` argument) add diameter, radius,
  center_distance, min and max; existing fields are unchanged.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-15 10:27:13 -04:00
Mateusz Sych 96356dc544 CLI snapshot takes --in; an unknown command suggests close ids (#1301)
snapshot starts from --in (a design or STEP file) with the script on top, as run does, and refuses options it doesn't take; an unknown command id names the closest registered ids.
2026-10-15 02:13:14 -04:00
Lasse Lian a4a8b48567 Design properties: project, author and licence in the design, its exports and inspect_design (#1015) (#1189)
A design carries metadata (format 21): project, part number, revision, author, organization, description and license, plus other tools' data under reverse-DNS keys, kept as written. Edited in the Design Properties window (Document Settings), set by document.metadata.set, reported by inspect_design, and written into STEP, IGES and 3MF where the format has a place for them. Translated, with tests.
2026-10-14 18:25:35 -04:00
selune d399effbf7 Local appearance and material libraries (#863)
Adds local scalar appearance and material libraries: a catalog in the io crate with safe writes, engine commands to list and apply library entries, and a library dialog in the UI, with docs.
2026-10-14 12:21:35 -04:00
Lasse Lian ec8e739aad Export a design's timeline as a replayable command script (#1045)
timeline.export_script (and solidcraft-cli script) writes a design's history as a command script that solidcraft-cli eval replays into the same design, so a bug that only shows on one design becomes a one-file repro. timeline.add restores one stored feature with its id, names and references, through the same checks a design file gets when it opens.

Closes #886. SychPL's #1078 approached the same issue independently; thanks to both.

Co-authored-by: SychPL <SychPL@users.noreply.github.com>
2026-10-14 09:06:24 -04:00
selune 01f2c78cd1 Validate sourced physical material property cards and elastic stability (#934)
Adds the read-only material.properties.validate command: schema_version 1 engineering material cards in SI units are checked for numerical consistency and elastic stability, with derived isotropic moduli, missing conditions and sources needing review. Nothing is assigned or saved.

Thanks @0xlillith.
2026-10-14 05:28:18 -04:00
Irakli Kourtis c8d668108a Surface toolset: icons and planned commands (#808)
Icons for the surface toolset, and its planned commands registered and disabled with the issue that tracks each one.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 14:28:38 -04:00
William Dunn ff609bc320 Make SolveApp::start honour a command's enabled flag, and disable solid.move inside a sketch (#740)
`SolveApp::start` now honours a command's enabled flag, so shortcuts, the command palette and the control channel can't start a disabled command, and Move is disabled while a sketch is open.
2026-10-13 11:43:45 -04:00
selune 0e500cacd3 Render: add backend capability discovery and strict request resolution (#650)
Adds render.backends, a metadata-only command that lists the render backends, their executors and profiles, with strict request resolution in the render crate (docs/render-backends.md).
2026-10-13 10:17:41 -04:00
Karl Von Richter 7b34d57b25 feat(ui): offer a cube navigator alongside signed axes (#664)
Adds a View navigator preference (Navigation page) with an optional cube navigator alongside the signed axes, which stay the default (#165).
2026-10-13 09:28:52 -04:00
Jonas Wrede 46e21127dd feat: insert another design as a linked component (#596)
component.insert_design adds a component holding another design's solid bodies, linked to its file (stored relative to the assembly once saved). component.update_links reads the linked designs again, component.break_link keeps the bodies and forgets the file, and component.links lists them. Links are saved under format 16; an older build keeps the bodies and drops the link.

Fixes #533
2026-10-13 06:40:58 -04:00
Jonas Wrede 14635e5d3a feat: user-defined physical materials stored in the design (#532) (#606)
A design can define its own physical materials (material.create, material.edit, material.delete): name, density and an optional look. They work everywhere built-in materials do: assignment, mass properties, colours and configuration cells. Stored in user_materials, an additive field under format 16. Un-ignores the #554 regression test. Fixes #532.

Co-authored-by: jonaswre <jonas.wrede@beyondit.gmbh>
2026-10-13 04:47:23 -04:00
bherbruck 296683229d Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)
* WIP deep rename (not for push)

* WIP2

* WIP3

* WIP4 wxs fix

* rustfmt

* Rename the remaining identifiers in merged crash-report code

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 17:17:01 -04:00
froglemonade2 27415e4dd7 Crash reports: replayable, bounded, local, reachable by agents (#384)
Every panic (in a command, in the kernel, anywhere else) and every unclean
exit (abort, stack overflow, kill) leaves a report in a local crash folder:
message, file:line, a trimmed backtrace, version, commit, system and renderer,
the command and recent commands, and when possible the design and replay.json
that reproduce it (solvecraft-cli crashes replay <id>).

- Cost: nothing until the app installs the hook (tests, CLI and web never
  do); then one small journal line per top-level command of the design on
  screen, taken back with a truncate when the command changed nothing.
- Unclean exits: each run holds a lock on its journal; a journal nobody holds
  at the next start belongs to an app that died. Autosaves restart the
  journal from the autosaved design.
- Bounded: a crash's signature (place + message, numbers ignored) is counted,
  not rewritten; at most 5 new reports per run, 20 reports, 50 MB, 90 days;
  recovered kernel panics are pruned first.
- Agents: diagnostics.crash_reports / crash_report / crash_reports.clear
  commands, the MCP crash_reports tool, solvecraft-cli crashes, solvecraft
  --crash-log; diagnostics.crash_test (with SOLVECRAFT_CRASH_TEST) checks it.
- People: the Crash Reports window opens after a crash (Help > Crash
  Reports…) with a reviewed issue draft per report; nothing is sent.
- Release builds keep line tables for file:line in backtraces.

Tests: child processes that really panic in a command, in the kernel, on a
thread, and abort; dedup counts, limits, hostile folders, journal parsing,
the UI window and draft, the MCP tool. docs/crash-reports.md.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-12 16:50:49 -04:00
Iraklis Kourtis fe4d171e22 feat(sketch): live drag that keeps its solution, ended by sketch.drag_end (#341)
* feat(sketch): constructive solving ahead of the numeric solver

Part 1 of splitting #251: the sketch crate only. A graph-constructive front
end (Owen 1991; Fudos & Hoffmann 1997) places what it can by ruler-and-compass
loci and cluster decomposition, Levenberg-Marquardt finishes and verifies the
rest, and the rank analysis stays authoritative for degrees of freedom. Solves
can follow a reference (the previous solution), so edits and drags keep their
branch instead of flipping.

New API: solve_with (hold, reference, analysis, budget) and
solve_after_value_edit; solve and solve_holding keep their signatures as
wrappers, so no caller changes here.

When the seed moves an arc's centre, the arc's unconstructed ends start carried
along (the arc translates) instead of left behind for LM to turn; found by the
reference test 20-slot-constrained.

Refs #203

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TWc1smHYwTSVrVc8SNvS44

* feat(doc): keep a sketch's solved state across value edits

Part 2 of splitting #251 (builds on part 1, the sketch crate):
- Sketch edits solve for the document's values continuing from the stored
  solved state (Document::solve_sketch), so a dimension edit keeps the
  sketch's branch instead of re-solving from scratch.
- A value edit (parameters, a configuration, the units) that would make a
  sketch that solved before fail or turn over is refused with the
  conflicting constraints named; otherwise the solved sketches are written
  back into the document (Model::adopt_solved_sketches), which changes what
  saved designs store.
- Later features are keyed by a sketch's solved geometry (to a 1e-6 mm
  quantum), so setting a value back reuses their earlier results.
- Solved sketches in a model state are shared (Arc) between states.

Refs #203

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TWc1smHYwTSVrVc8SNvS44

* feat(sketch): live drag that keeps its solution, ended by sketch.drag_end

Part 3 of splitting #251 (builds on part 2):
- sketch.drag follows a long move in short held steps, so the geometry keeps
  its branch, and reports how far it got (reached, at).
- live: true runs one frame of an interactive drag: the sketch is solved
  once and shown, later features keep their last result (marked stale)
  until sketch.drag_end or any command that reads the model evaluates it
  (CommandSpec::live, reads_model, doc_only).
- sketch.drag_end adds the constraint the drag let go on and evaluates the
  model once.
- Undo and redo evaluate a new document once (execute does) instead of
  twice.
- The viewport drives drags through live frames and drag_end; dimension
  text drags start only off sketch geometry.

Refs #203

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TWc1smHYwTSVrVc8SNvS44

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 13:45:48 -04:00
bherbruck 3b8028a040 Retire legacy reference data and the external command catalog (#302)
- Remove xtask/data/fusion-catalog.tsv and xtask/data/fusion-ids.tsv.
- Remove the legacy command-id table (crates/engine/src/legacy_ids.rs) and its use in
  find_command and in the shortcut, recents and pinned-command loaders. Only SolidCraft's
  dotted ids name commands; any other id is an unknown command.
- Boundary Fill's id becomes solid.boundary_fill.
- Replace the parity report with SolidCraft's own feature checklist: `cargo xtask features`
  writes docs/features.md from the command registry.
- docs/oracle.md, docs/step-import.md (corpus section) and docs/iges-import.md: reference
  results are being rebuilt on analytic and open-source (FreeCAD) values; see #292.
  `cargo xtask oracle` and `cargo xtask step-corpus [--iges]` write these placeholders.
- AGENTS.md, CLAUDE.md, CONTRIBUTING.md, README.md, ROADMAP.md and the book describe
  SolidCraft as independent, with reference tests on analytic values and open-source tools,
  and agents do not drive or extract data from commercial CAD products.


Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 11:19:15 -04:00
lillith df4c8a2994 Reconstruct constant-section meshes as parametric solids 2026-10-12 10:06:42 -04:00
CypherNaugh_0x 4667c3a600 Fix sketch re-export ordering for rustfmt 2026-10-11 13:57:06 +02:00
CypherNaugh_0x b93d4905ac Merge remote-tracking branch 'origin/main' into feat/sketch-tools-return-ids
# Conflicts:
#	crates/engine/src/cmd/mod.rs
#	crates/engine/src/cmd/sketch.rs
#	crates/engine/src/cmd/sketch_create.rs
#	crates/engine/src/cmd/sketch_modify.rs
#	crates/engine/src/lib.rs
#	docs/book/src/guide/sketching.md
2026-10-11 13:07:50 +02:00
CypherNaugh_0x cc22672041 Sketch commands return the ids of the points, curves, constraints and dimensions they create as created: {points, curves, constraints, dimensions}, worked out in Session::execute from the sketch before and after, so a script can dimension and constrain new geometry right away; ids stay stable and are not reused after a delete (undo rewinds the counters with the design). The MCP execute tool describes the field 2026-10-11 12:23:57 +02:00
bherbruck a6bb8fc924 feat: stabilize face attachments and closed spline workflows 2026-10-11 05:32:46 -04:00
bherbruck 0398a813c8 feat: strengthen sketches, feature editing, and independent assemblies 2026-10-11 02:44:31 -04:00