5e4c52a7cba8fc024a9ab1c1923e003da2c5ad3d
48 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
ea772a0438 |
Merge develop into main: SolidCraft on the SMLib kernel (v1.1.0-alpha) (#11351)
* UI: rim and wall picking tests for a circle of arcs that is one wall A circle drawn as two half arcs now extrudes to one full-turn wall with its seam edge, and each rim is one closed edge (tangency-labs/smlib#67). The tests keep their intent on that body: a rim clicked once is one item, measured and highlighted whole and picked from either side; a wall picked either side of its seam is the same surface, lit whole, and toggles off from the other side; every face is its own patch. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Fillets: a later round at a corner where earlier rounds meet blends them again with it The owner's ruling of 2026-10-30: a later fillet on an edge at a vertex where earlier rounds already meet in a mitre makes the corner rounding all of them at once makes, one smooth patch, the mitre gone. A body made by constant-radius rounds keeps what they were made on and which edges they rounded at which radius; a later round reaching such a corner blends the earlier rounds' edges (from the earliest of those meeting there on) with the new edges in one SMLib blend of the body before them. The result's history is put over the body the later round was given: an earlier round's face is that face trimmed anew (its name kept), the corner patch and the new rounds are the later fillet's. A picked mitre seam has no round of its own: it is refused unless a new edge of its radius meets it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tests: a later r3 round at an r2 mitre, through the Fillet feature, makes the all-at-once corner Two box edges rounded r2 in one fillet, then the upright edge at their mitre r3 in a second fillet (tangent chain on, so the seam comes with it): 10 faces, 7928.743041 mm³ as fillet_radii of the box gives, the r2 rounds' names kept, the r3 round and the corner patch the second fillet's. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel: a body's record of rounds goes with its history, and can be read back The rounds that made a body are over the body its history is over: a new history (an operation carrying a step's result back to its own operands) leaves the record out, so a later round never reads one history against another body. Body::rounds gives the record and Body::with_rounds_of takes one back, checked (edges of the body before them, a fillet's radii, the body's history over that body), for a saved model to keep it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Model cache: a body made by rounds keeps them, so a later round blends them the same after opening A design gave another body when opened from its model cache: the rounds a body was made of lived only in memory, so a later round at their mitre was built sequentially (or refused, as too large) after opening and blended with them when evaluated anew. The saved model now records, per kernel body made by rounds, the body they were made on (a place in the bodies, stored once though no state holds it) and the edges with their radii; reading it attaches them back down each chain, and a thinned model keeps those bodies with the bodies made from them. Model cache format 7. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tests: a corner patch of rounds 2/3/4 takes no more than the strips leave in its block three_rounds_at_a_corner bounded the patch's extra cut at 3 mm³ beyond the strips, a figure with no derivation; SMLib's all-at-once body at radii 2, 3, 4 takes 3.099 (V 7878.579574 against strips 7881.678). That body is the strips' outside the block its patch lies in: its rounds are the strips' cylinders ending at a's section y = rc, b's x = 20 − rc and c's rails where they meet a's and b's (the patch's four corners, now asserted), so the patch takes at most what the strips leave in that block (11.86 at 2/2/3, 32.69 at 2/3/4). The lower bound is that block; the upper one, at most the strips' volume, stays. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tests: the io crate's hand-built saved models list their rounds, as format 7 records do Model cache format 7 (f3cf0c4f3) records a `rounds` list in every saved model, and reading one without it is refused ("saved model: rounds"), as is a model without any of its other lists: the states, the preview and the thinned model all came back empty. The io tests' saved_model and timeline_model wrote format-6 records, so six tests (the round trip, the repeated part stored once, and the four too-big-for-the-file cases) read nothing. Their bodies are none made by rounds: the list is empty, and every expectation stays as it was. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * SMLib: pin eaa998a (tangency-labs/smlib#68, #69, #70) Batch 4: drafts and loops, mitre corners, rim chamfers, rulings, tight box, stitch, point classification, eased corners. Batch 5: a face's tight box divides its cells at the surface's knots (thread boxes exact); a cylinder, cone, sphere or torus is extended along its own circles. Batch 6: a revolution's extension closes its turn; a dropped point's foot is the converged one. The C API is ABI 5 (smlib_blend_dropping and smlib_brep_classify_point are new; nothing existing changed), so the binding expects 5. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tests: a strip's tangent and curvature run-offs are the distance long across the surface SMLib measures an extension's distance across the surface (smlib_extend_sheet corrects CreateExtendedSurface until the parameter line through the side's middle is that long), so each run-off of the cylinder strip, swept 20 along z, adds 5 x 20: 10 pi/2 20 + 100 = 414.159 for both. The parabola-length formula (418.18) was truck's. Ruling d2 (2026-10-30). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * kernel: one smooth angle, and a round too small to change the part is refused The blend's tangent angle is the shaded view's half degree (smooth_edges::ANGLE), one value for smooth. A constant round lies r (sec(d/2) - 1) inside the crease it replaces (about r d^2/8); below the edge's tolerance it changes nothing and is refused before SMLib (which answered SM_ERR_INVALID_INPUT), naming the smallest radius that rounds, tolerance / (sec(d/2) - 1). d is the least turn along the edge (tangent_edge::least_angle_along, at tangent_all_along's stations). Ruling d3 (2026-10-30). The block's tolerance is 2e-5 mm, not 0.1 um: at 1 deg the smallest radius is 0.526 mm, so R2 and R20 reach SMLib, which still calls an edge within 2 deg smooth (SmEdge::GetBlendEdgeuse); that test is ignored until SMLib uses 0.5 deg. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Fillet rig: the knife-edge chamfers name SMLib's cause, a cusp's ball radius of 0 smlib_chamfer turns the distance into a ball radius d sqrt((1 - c)/(1 + c)), c the faces' binormals' dot (capi chamfer_radius); at #851's cusp the binormals agree, the radius is 0 and the call is SM_ERR_INVALID_INPUT before the fillet executive runs (gdb: chamfer_edges sees radius 0; the dump's why is empty). SolidCraft hands every chamfer to SMLib, so the ball-contact chord (the ball of radius d: 3.822 wide at d = 2, 159.2365 removed) is SMLib's to build. Ruling d4 (2026-10-30). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * kernel tests: a corner round wider than its faces overflows and takes the corner's other edges R21 on a 20 mm cube's edge builds (6107.529370, closed form, to 2e-12). With R5 on the corner's other edges the R21 takes the faces they lie on, so the body is R21's alone; SMLib fails that blend (status 1001, fillet error 4, Unable to Trim Rail Curve) and the test is ignored until it builds. It replaces the refusal test that expected TooLarge. Ruling d8 (2026-10-30). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tests: a 1 degree crease rounds, and the knife edge's chamfers build, on SMLib smlib-batch-4-rulings With SMLib's smooth limit at half a degree (422e6f1) the 1 degree crease rounds R2 and R20 (the test is no longer ignored), and with a cusp's chamfer the ball of radius d (d231547) the The 0.5 one stays, for its own cause (the chamfer face left apart from the body). Two corner cases the same SMLib (replay/1.0.1 and those commits) builds come off too. Needs SMLIB_REV at that SMLib once it is pushed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * kernel, doc: an overflowing round goes first; an edge it removes is gone, and the fillet says so SMLib (smlib-batch-4-rulings 0e83cca, SMLIB_ABI_VERSION 5) rounds the edges whose rounds overflow their faces first and then what is left of the others; smlib_blend_dropping says which picks' edges the overflow removed whole. The smlib crate binds it (Brep::blend_dropping), the kernel returns those picks (fillet_removing), and a fillet notes them as its warning: "the edge at (0, 0, 10) was removed by the larger round, so it is not rounded" (a 50 x 50 x 20 block, R21 on its bottom front edge with the front left upright: the block is R21's alone, in closed form). Ruling d8: [21, 5, 5] on a 20 cube builds as R21 alone (6107.529370); the test is no longer ignored. R25 with R2 at a corner (blend_corner) builds the same way, R25's alone in closed form, where it was refused. The rig's 1080 notched block outline at R8 builds now and comes off the known-failing list. Needs SMLIB_REV at that SMLib once it is pushed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Fillet rig: the knife edge's 0.5 chamfer builds SMLib's trim took a fillet meeting its face at more than 78 degrees for one with no side (smlib-batch-4-rulings 971e567); the chord of the knife edge's 0.5 chamfer meets the flat face at 81 degrees. The case comes off the known-failing list. Needs SMLIB_REV at that SMLib once it is pushed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tests: a 15° tapered text builds, every letter grown, exact where its outline gives it Owner ruling d6: the letter t of "tres long" was drafted inward by SMLib (its loop's normal, summed from the cross products of its chords, pointed down; fixed in SMLib). With the fix every letter grows, and the join builds at 3° and 15° by the Round rule and by the default rule (tangent for spline outlines), where before 15° was expected to be refused. Exact where the outline derives it: a letter's section at height z is its outline offset by e = z tan a, by the Round rule of area A + P e + C e² while the offset trims nothing (Steiner; C half each loop's turning less tan(t/2) - t/2 at each reflex corner), so the letter is A h + P k h²/2 + C k² h³/3. Each extruded alone, the t at 3° and s, l and o at 3° and 15° are checked to 1e-6 (SMLib measures them within 1.3e-9; its mass properties integrate to 1e-8). The concave joins of r, n, g and e are tighter than e already at 3° (their swallowtails trimmed: r 1.1e-3 under the formula), the t's by 15° (9.9e-5 over), and on the block the letters grow into each other, so the whole word is checked for what holds exactly: one closed body with the block, and half-way up every point of each straight letter's outline inside the solid (the t drafted inward failed that). With SMLib's fix (smlib-batch-4-text-loops 82133b2). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: a sloped basin's mitred rim rounds are checked tangent along their contact lines 1080-fillet-sloped-basin-1-mm-rim-r0-5-4-edges asked G1 at every blend seam. Its front wall leans 19 over 20 and the others 10 over 20, so at each rim corner the two mitred rounds meet the sloped corner edge at different heights (0.155625 and 0.276393 below the top): the deeper round runs on past the corner edge and is cut by the plane of the other's wall, a crease by construction, the gap below the shallower round filled on that plane. The check now measures the rounds' contact seams, on the top and on each wall, where the rounds are tangent. The volume is unchanged. With SMLib smlib-batch-4-mitre (1c15364): the case passes (V 144530.427946 against 144530.427909, 15 faces, sound); before it, only the four corner creases failed the check. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * smlib: Brep::classify_point says exactly where a point lies against a body Binds the fork's smlib_brep_classify_point (SmBrep::Point3DClassify at the body's own zone tolerance): inside, outside, or on the boundary within that tolerance of a face, an edge or a vertex. A box and a cylinder just off its curved wall in measure's tests. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs * kernel: Body::classify_point decides inside, outside or on the boundary exactly SMLib's point classification at the body's own tolerance, on the exact faces and edges, in place of a mesh at a chord of 2e-3 of the body's size (about 0.4 mm on a 200 mm part). A point within the tolerance of a face, edge or vertex is OnBoundary, never decided by a ray. A mesh body's triangles are its exact shape: on them within the record's tolerance, else by ray crossings. The kernel's own probes move to it; Body::contains goes once its last callers have. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs * doc: a hole decides whether it exits at its drill point's shoulder exactly Material past the depth needs a body with the point inside, air before it needs every body to have it outside; a point within a body's tolerance of the exit face is neither. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs * engine tests: probes ask for the exact point class Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs * ui, cli tests: probes ask for the exact point class Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs * kernel: Body::contains, the mesh test, is gone Every caller asks Body::classify_point now. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs * kernel tests: the rim chamfers running off their rims build, on SMLib 737c392 chamfer_wider_than_sloped_basin_rim_builds and a_rim_loop_chamfer_running_off_its_rim_builds waited for SMLib to build the cliff overflow (CloseRemovalRegion refused it, SM_FILERR_NO_ROOM). The pinned SMLib builds it (eddf0ede4, bba9914b6): both pass on aarch64 Linux and are no longer ignored. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Fillet rig: the cases SMLib 737c392 builds come off the known-failing list The gate on aarch64 Linux reports 16 fillet cases FIXED with the pinned SMLib: the sloped and equal-slope basin rim chamfers and rounds past their rims (1080-*, 5835-*), the pocket rim chamfer past the floor, and the three pocket rim rounds now mitred at the pocket's corners (every-pocket-*). No other area's gate reports a case fixed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * kernel: the re-blend's removed picks formatted as rustfmt lays them out Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * kernel: blend_smlib laid out by the 2024 edition's rustfmt Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Skills: the tests skill's unit-test example stays under the 3600-character limit Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Fillet: the radius-too-large choice in plain nouns "If too large: Stop and say so / Largest that fits / Narrow where needed" becomes "Face limits: Exact radius / Largest radius / Narrowed radius", in every language of the catalog, with the error and the tip that name them. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * kernel: a round that would cut through its wall into a hollow is refused The owner's rule of 2026-10-30: a round running past a rim of its faces into open air builds; one whose section would remove material through to a hollow behind its edge (a slit into the hollow, a cut through the part) is refused as too large, so the fillet names the largest radius that fits. Decided exactly in the section of a straight convex edge between planar faces: the round's centre is at depth r below both planes, and it opens where its arc uncovers a boundary point strictly inside the wedge with no material beyond it toward the centre (the body's exact point classification). Looked at: straight edges parallel to the round's (a hollow's corner), cylinders about parallel axes (a rounded corner), and a picked concave parallel edge's own round, which fills the corner. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Fillet rig: 1668's R7 past the inside corner is refused at 4 + 2 sqrt2 The round's centre (32 - r, 42 - r) leaves the hollow's corner (30, 40) outside its circle, opening the wall, where sqrt2 (r - 2) = r: the case expects the refusal naming 6.828. 2852's R30, refused naming 25.24, now passes too: both come off the known-failing list. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * xtask: known-failing grades a nextest junit report against tests/KNOWN_FAILING_TESTS `cargo xtask known-failing --junit PATH` reads nextest's junit (a file, or every .xml under a directory, so all of a run's junit artifacts at once) and fails on a test that failed and the list does not name, and on a listed test that passed (FIXED: take its line off, as the kernel rig's gate does). A listed test that did not run is neither, since a pull request tests only the packages it touches. The list has the rig's KNOWN_FAILING format (`<test> <cause>`, sorted, the rig's own parser), with `<test>` nextest's `<binary id>::<test name>`; `cargo xtask lists` checks it is sorted. The list starts empty. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * CI: the test jobs grade their junit against tests/KNOWN_FAILING_TESTS Native Linux tests and the GPU path test shards no longer fail on any failed test: nextest's "tests failed" exit (100) goes to `cargo xtask known-failing --junit`, which fails on a failure the list does not name and on a listed test that passes. Any other nextest exit (a build error, a bad filter) still fails the step at once. The tests skill says to list a failing test with its cause, in place of ignoring it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tests: the known-failing list takes develop's 10 failing tests Develop 38fd4a4f6 (CI run 41157648345, after the SMLib eaa998a pin) fails 10 cargo tests; each is listed with the cause its failure message gives. Seven are SMLib refusals or results off their derived volumes (fillet, chamfer and shell), the cli action matrix and naming corpus among them; the two corner_g2 tests are the fitted G2 corner patch bulging past the box, which the explicit G2 corner fixes. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Reference tests: the eight cases that fail on SMLib eaa998a name their cause as known failures Develop 38fd4a4f6's Reference tests fail 34, 35, 77, 78 and 81 (STEP export finds fillet edges 4.6e-5 to 6.1e-5 off their surfaces against 2e-5), 37 (the apex blend 0.193 off), 80 (the taper-to-fit area) and 83 (thicken status 1001). Each expected.json names its cause in known_failure, which the oracle already reads: a known failure that passes fails the job. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Sweep path: a curve of several pieces is turned round whole The path chain oriented its first piece, not its first curve: a first curve of several exact pieces (a fit spline, an ellipse, a projected free-form edge) was never turned round, so a path whose next curve meets it at its start was refused as "not connected end to end". The chain now orients curve by curve: the first runs toward the second where they meet at one end only (else from the end nearest the profile), each next one starts where the previous ended, with one joint tolerance for both questions. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * SMLib: pin 2fc375f (tangency-labs/smlib#71, #72, #73) A sheet's side is extended exactly the distance asked, or the call says it cannot (#71); NVIDIA's -Werror build passes again (#72); a body splits by a sheet of several faces as it is, smlib_split_body_by_sheet (#73). The C API is ABI 6 (the new entry), so the binding expects 6. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * kernel: Extend grows a surface of several faces face by face A surface body of more than one face (a fit-point spline's spans extruded, #3830) was refused. Each face with a picked edge is now extended alone by SMLib's extension of its surface, and the faces are sewn back together, each the face it was. A side that lengthens onto a face meeting it tangent takes that face along, past its edge continuing the picked one; across a crease the neighbour grows only when its edge is picked too, otherwise the extension is refused. Faces whose lengthened sides no longer meet are refused. Up to a target keeps the pieces every grown face lies in. 3830's extensions now build; its split still fails (the tool point picks one span, and a face tool cuts with that face's surface alone), so it stays on the list with that reason. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * kernel: Split Body by a face of a smooth sheet cuts with the whole sheet A face tool cut with that face's surface alone, so a face of a surface body made of spans joined tangent (a fit-point spline extruded, #3830) cut nothing where its span ends inside the body. Split Body by a face of a surface body now takes the faces joined to it tangentially (the exact check Extend uses, within the one angle for smooth) and slices with them as they are, through SMLib's slice by a sheet (smlib_split_body_by_sheet, tangency-labs/smlib 7a01f1b), its sides those of the picked face. A sheet that only nicks the body cuts nothing, as before; a lone face, or a face of a solid, still cuts with its surface extended. 3830 comes off the booleans list. Its answer counted the two halves of the cup and not the surface that cut it, which stays as a body of its own (4879 removes its surface for that reason): three bodies, the volume unchanged. Needs SMLib 7a01f1b pinned (SMLIB_REV, prebuilt; its SMLIB_ABI_VERSION 6, which crates/smlib now expects) to link. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tests: a cylinder strip's run-offs are 100 pi + 100 to 1e-6, SMLib's exact area The tangent and curvature run-offs of the quarter cylinder r 10 strip, 5 across the surface, are its section swept 20 along z: exactly 10 pi/2 20 + 5 x 20 = 414.159265. measure is SMLib's integration on the exact surface (1e-8), not a mesh, so the run-off check is 1e-6 relative and the 'measured on meshes' notes go. Red until SMLib's extension is solved to its distance (smlib-extend-converges 590d8a1): eaa998a's curvature run-off is 4.986 long, area 413.882. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * kernel: an extension SMLib cannot make exact says so, naming the length asked Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Sketch: a control spline can carry its own knots and weights A sketch spline over control points was always the clamped uniform B-spline over them, so a free-form edge whose knots are not evenly spaced (or whose weights are not 1) could only come into a sketch as one curve per Bezier span. A control spline now may save `nurbs`: its clamped knots and its weights. Its points, polyline, exact pieces (one a knot span; conics for a rational quadratic), the solver's distance and curvature, links, parallel re-projection and inspect.sketch all read them; a loaded design's are checked. One pending format file (spline-knots). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Sketch projection: a free-form edge comes in as the one exact spline it is A projected spline edge of several Bezier spans came into the sketch as one curve per span (#1508), so a G2 round's bottom edge was 16 curves and a path naming the corner named one span of it (#3604). The kernel now reads such an edge (a spline, or an elliptical arc of several spans) as the one clamped B-spline it is over the edge's interval, its knots and weights its own, and the sketch takes it as one control spline whose ends sit on the edge's vertices. Planar regions still read edges span by span. The 3604 case builds with its original path and leaves KNOWN_FAILING. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Fillet rig: blends past an outer rim of their faces build, on SMLib smlib-blends-past-rims The owner's ruling: a round or chamfer that runs past an outer edge of its face into open air builds, tangent where it has room and cut by the face beyond where it runs out. SMLib's branch smlib-blends-past-rims builds them by the rig's analytic answers. Off the known-failing list: the disc's rim past its 2 mm wall (190), the hole's top rim R12 past the plate's bottom, the chamfer past the cylinder's bottom (2893), each closing on the wall continued as itself, and 926's chamfer ending on the boss's wall, which now builds to its answer too. The sloped basins' R4 rim rounds (1080, mitred rounds built together where one overflows) build to their analytic volumes (to 6e-9), and stay listed with that reason: their continuity check (g1 at every blend seam) takes in the mitres' creases, G0 by the mitre ruling. 2893-chamfer-two-distances-elliptical-rim is graded as a solid (the owner: it builds) and stays listed, waiting on the ruling on unequal chamfers along a rim whose angle varies. 5158-fillet-round-just-past-a-10mm-face stays listed with its cause found: the round passes 5e-6 under the box's top back edge, inside the body's tolerance. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Naming: test that a round of a round's end has no seam with that round's faces The r1 round of a block's top edge, chained onto the end curve of the r2 round of its arc at a cylinder (rig fillets/every-block-cylinder-crease- top-edge-after-arc-round-r1), ends where it runs into the cylinder. That edge is no seam of the r1 round: the cylinder is a face of the r2 round, not of the r1. blend_seams takes it for one today (the r2 round's name F3:blend:F1:+z|F2:side holds a | of its own), and the rig reads it as a contact seam at 60 degrees. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Naming: a blend's seams split its edge's name at the | between its two faces A blend face's name holds the edge it replaced, <face>|<face>, and a side of that edge can be a blend face whose own name holds a |. Whether a face is a contact of the blend was read as the edge's name starting or ending with the face's name next to a |, so the r2 round's own face F2:side read as a contact of the r1 round F4:blend:F1:+y|F3:blend:F1:+z|F2:side. The edge's name is now split into its two faces, a blend side read whole as the two faces of its own edge. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Fillet rig: five refused blends build, off the known-failing list 926 (the chamfer ending on the boss's wall), the oblique cut's r0.1 round, the every-block r1 round (its seam with the cylinder is no contact seam, after the blend_seams fix), the up-down squares' concave chamfers and the shelled box's lip chamfer build with SMLib branch smlib-blend-refusals (f8650b8 and later). 1207 r0.5 passes SMLib's check on its rails now and stays listed for the next cause: its end rib on the boss, which starts where the round and the boss are tangent. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the trough and the pocket whose floors fall to a drain build SMLib now offsets a vertex where four faces meet (two walls and two facets at the floor's corners, four facets at the drain) to two vertices joined by a new edge (tangency-labs/smlib branch smlib-shells). Both volumes match their closed forms. The pocket's lining, hanging from the top's rim round the pocket, stands apart from the slab's outer walls with the cavity rising between them to the open top: the case says two shells in the one body. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the plate with a hole through its arc side shells open at its far end SMLib's merge now intersects the offsets of an edge's faces where they could not be mated along it (the hole's offset poking out through the half-round side's; tangency-labs/solidcore#1795): one closed valid solid with the one face open, as the owner ruled. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the ring cut frame and the up-down join shell SMLib's inset now keeps only the regions that are cavity, not the one the offsets close where they overlap (between the two faces of #545's 0.5 floor, round the up-down join's two empty octants). The frame's core under the recess is hollowed to a sealed void, so the case says two shells and its closed form, 21044 mm³. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: #616's lid shells open at a rib's side, with the 0.15 lip SMLib keeps the skirt top's offset where its loops wind the other way under the opening, the cavity's floor (the owner's ruling of 2026-10-31: build it; a lip thinner than the wall is no break-through). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Known failing tests: the action matrix's shells and chamfers as they fail with SMLib batch 7 The ring cut frame's and the up-down join's shells build now, and so do the up-down join's and modern-plastic's chamfers (SMLib smlib-blend-refusals). #616's lid in the corpus still fails SMLib's loop check, the shelled box shelled again at an inner wall is unchanged, and the oblique cut of a cylinder's fillet still fails SmSurfOfRevolution's Test #7: 3 actions of 7. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * SMLib: pin 26cc451 (batch 7: rounds past a rim, blend refusals that build, shells) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Known failing tests: the shell after a cut whose end touches an arc side builds on SMLib batch 7 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Surface fair test: the energy falls strictly, the face moves, and the edges are read after the fair Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Sketch scaling test: the first dimension sets l1 to 40 and scales both joined rectangles about the origin Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Frames tests: a pick on a moved component or an instance removes the exact round and bore volumes Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Issue 1080 tests: the rib's rounds and the mitred corner chamfers and rounds have their exact volumes Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Engine tests: lip_after_boss checks each lip's and groove's exact band, hole_as_deep_as_the_plate each hole's exact bore Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Robustness tests: lip_after_boss and hole_as_deep_as_the_plate live once, in the engine's tests.rs with exact volumes Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Engine tests: loft_cut goes; loft_spacing's hollow elbow covers its section counts and more Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel loft test: the square-to-circle loft has the oracle's exact ruled volume, without printing Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tessellation lens test: the lens's triangles fill exactly the rhombus through its arcs' midpoints Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Pattern test: six chamfered holes take exactly five more holes' bore and chamfer rings Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel pocket floor fillet test: the corner rounds and the floor loop round add their exact volumes, by Pappus at the corners Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Shell regression: the saddle-corner shell opened on the top box's side has its exact volume Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * SMLib history test: every operand's order is the identity on its record's faces and edges Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Boolean history tests: the SMLib module's box-minus-sphere, box-minus-cylinder and box-union-box copies go; the top-level ones check more Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Modify history tests: shell, offset and thicken are one test each through the public API, with the volumes, refusals and history the SMLib copies checked Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Chamfer history test: the chamfer after each box cut is exactly one face on the painted block too Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Grid test: a pole side's face is the five triangles fanned from its one grid node, none degenerate Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel tests: the twelve ignored print-only debug tests and surveys go; coplanar_curved_booleans checks the flush-capped cylinder cuts and unions they printed Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel: the #883 board fixture generator is an example, not an ignored test Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * STEP import test: a seam sphere whose meridian stops short of the pole imports as the whole 2 mm ball Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Material tests: the nine copies in material_properties go; the persistence file checks the library copy's card and formats 20 and 21 in one loop Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Sample test: one loop checks every sample builds cleanly and without a panic; the robustness copy goes Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Known failing: the non-antipodal seam sphere import, refused for a loop of no (u, v) area Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tests: rustfmt the board fixture example and the coplanar asserts Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the two 3871 cone cases were byte-for-byte the 258 cases; the 258 cases carry their sources Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: a volume or area can be graded as a hand-derived range where analysis only bounds it Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: fillets keeps one case per regime; 17 replications of a case in the same regime go The sloped-basin chamfers and rounds at 0.5 mm rims repeat the 1 mm rim's regimes; two of the three knife-edge chamfer tips, the r1 and box r3 curvature corners, the r1 tangent corner, the 1 mm pocket-rim and hole-rim chamfers short of the floor and the r1 together-round each repeat a kept case's regime and grades. #854 moves to 851-chamfer-arc-top-edge-9-5, and the cases that cited a dropped one cite the kept one or state its formula. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: five cases outside fillets repeat a kept case's regime and go A square cut is the slanted plane's ordinary crossing; the cam's half turn is the quarter turn's contact at a symmetric angle; the r15 slab stands inside the same coincidence tolerance as the r10; the 90 degree unfold and the 40 degree flange repeat the 72 degree and 20 degree cases' formulas. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 3243 rim and tooth join graded on its volume (rim plus the trimmed tooth less their 0.01 mm overlap) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 3782 emboss on a cylinder graded on its volume, area, faces and box (the wrapped 4 x 5 badge raised 1 mm) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 3604 G2 swept-tool cut graded on a volume range (filleted box minus the swept corner section) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 4505 coil joined through a cylinder wall graded on its volume, area and box (cylinder plus the wire's screw-swept segment outside r 76) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 4879 window cut through a thickened spline revolve graded on a volume range and its faces Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 4623 join of crossing pleated loft skins graded on its volume and box (both skins less their overlap) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 831 tapered glyph extrude graded on a volume range and box (the font's S drafted in by 10 deg) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 2357 ring of 90 cylinder segments graded on its volume and box (the segments less their 90 joint overlaps) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 4542 fluted wall joined on a revolved base graded on its volume and box (the base by Pappus plus the fit-spline ring) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 1985 and 2243 STEP-export enclosures graded on their volume and box (the outline less the cavity, plus gusset and standoffs) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: both 4092 loft, ribs and pad unions graded on their volume and box Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 1525 graded on its volume (the convex body's exact 2 mm inward offset), faces and box Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 1494 graded on its volume (box and cylinder less the 1 mm-offset cavity, sharp to rounded concave edges) and box Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 4492 graded on its box and a volume range (the face's 19 mm sweep added, within the block's sides) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 745 graded on its volume (the end moved 1 mm plus the spline boss's exact area), faces and box Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 4567 graded on its volume (the revolved spline less its revolved 2 mm offset), faces and box Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the up-down squares shell graded on its volume (the columns less the 0.346 mm-offset cavity, sharp to rounded concave edges) and box Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 545 graded on its volume (the frame less its 0.5 mm-offset cavity, sharp to rounded concave edges), its sealed pillar void and box Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the shell-again case graded on its volume (the shelled box less the 0.5 mm-offset cavity in its walls) and box Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the arc-sided plate shell graded on its volume (sharp to rounded at the hole's bottom), faces and box Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 616 graded on its volume (the lid less its 0.5 mm-offset cavity, sharp to rounded concave edges) and box Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 391 graded on its volume (the shelled housing, sharp to rounded at the flange, less the letters' 0.6 mm deboss) and box Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: shell/3576 was the ladder's drafted box with rounds shelled, recipe for recipe; the ladder case grades it and carries #3576 and #3573 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the two 851 chamfers of 2 graded on their volume (the cone's sweep, and its union with the front edge's prism) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the chamfered corner of the lipped shell graded on its volume (the chamfer's triangle through the wall) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the concave round into the peg's cylinder graded on a volume range (the torus it must add, the band it can't leave) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the two folded 72 degree trays graded on their volume (flat area x thickness) and the walls' reach Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the flanged rhombus graded on its volume (flat area x thickness, all four reliefs cut) and its walls' ends Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the base with two adjacent flanges and a hole graded on its volume (base, bends and panels folded) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the flange beside the ledge graded on a volume range (the flange's two readings of its length) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the two G0 window patches graded on the box the part they close keeps Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the hub's six swept grooves graded on its volume (the revolved hub less each tube's part inside it) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the cut mirrored loft graded on the box its sections pin Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the three modelled-thread joins and the fine M48 graded on their volume (the basic profile's groove, Pappus) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the oblique-cut round graded by its seams (tangent, not curvature-continuous); the flanged rhombus says what it tests (its reliefs stay apart at 60 mm) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 3841 is 168's rim touching its coin along a circle, and 4092's reduced recipe is its report less a flange clear of the failing join; the kept cases carry their sources Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the oblique-cut round keeps its old grade until the new blend algorithm lands Its seams grade needs the continuity check to skip the body the round is not on. Fillet cases wait for the new algorithm. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: 1985's enclosure is 78 x 77 (74 and 73 inside, 2 mm walls); its volume 38063.827 by hand Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the three spline walls' face counts wait for the one-wall decision; their volumes grade them Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * STEP import: a face bounded by seams alone runs its loop the other way, never turns over A loop that uses each of its edges once each way (a whole torus within its tube and ring seams) is the same set of uses run backwards, so it says nothing of the face's side. One written clockwise in (u, v) turned the face over, against its same_sense: the torus came in inside out with a warning. Such a loop is now reversed and the face keeps its side. Test: seam_only_torus_imports_as_a_whole_ring, both orders of the two seams, volume 2π²Rr². Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * STEP import: a face bounded by a slit alone is the whole of its closed surface A loop that runs out along a chain of edges and straight back (a meridian from a sphere's pole stopping short of the other, out and back) encloses no (u, v) area, yet on a closed surface it bounds all of it less a cut of none. The reader only read such a face when the slit already ran pole to pole (and moved the sphere's frame onto it only then), so the 2 mm ball whose meridian stops at 2.5 rad was refused for its empty loop. The slit is now made the face's seams, so its loop bounds the surface's whole domain: on a sphere, a revolution whose profile ends on its axis, or a spline closed round u that collapses at both ends, the slit's meridian is run on to both poles, out and back (a sphere's frame put on the slit first, whichever two points it joins); on a torus, the circle the slit lies along is closed and the other circle through its start is the second seam. The seams on a sphere are its own meridians (angle 0 on the equator), so their pcurves are exact lines on its form. Tests: non_antipodal_seam_sphere_imports_as_a_whole_ball passes (its known-failing line goes); seam_only_torus_imports_as_a_whole_ring adds a torus bounded by a slit along its tube. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Rig: the test-peg's concave arc and front top edge rounded together stay within the body's box A new fillet case, report-fillet-concave-arc-and-front-top-edge-together-solver-residues: the reported part's bar (with the sketch solver's residues) whose sides run tangent into the cylinder, its concave arc and front top edge rounded r2 together. The plane of the front face bounds the whole body, so every blend lies within the unblended body's exact box (SMLib's tight box); graded to 4e-5, the corner patch's own tolerance. On SMLib 2fc375f the corner patch stands 0.0374 out of the front face (box y min 0.0205): listed in KNOWN_FAILING. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Rig: the test-peg corner at r5 and r7 Two more fillet cases, the reported part's concave arc and front top edge rounded together at r5 and r7, with the same exact-box containment check (graded to 4e-5, the corner patch's tolerance). On SMLib 2fc375f the corner patch stands 0.128 (r5) and 0.230 (r7) out of the bar's front face (box y min -0.0699 and -0.1723): listed in KNOWN_FAILING. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Rig: blends that end where their face runs tangent into another Fifteen fillet cases on the test-peg's shape with clean numbers: a bar 40 x 16 x 10 whose far end is a half disc R8, a disc R8 standing 10 on its top, joined, so the front face runs tangent into the cylinder along x = 40 and the front top edge (convex) meets the concave arc of the top tangentially there. Each blend ends on a face tangent to the one it rolls on. - Rounds: both edges together at r2 and r5; one after the other in either order at r2, and at r1.5 and r3; the front edge alone as a curvature round, whose end on the cylinder is a semicubical cusp. The containment invariant (the unblended body's exact box, to 4e-5) and G1 seams, or the analytic volume where the blend has a closed section. - Chamfers: the front edge alone and the concave arc alone (analytic volumes: the section along x up to the wall, the cone's spandrel ring clipped by the sides), both together, and one after the other (1 then 2). - STEP: the peg written to STEP and read back, its front edge rounded (analytic) and both edges rounded together. - A cone: the peg drafted 5 deg, whose front face runs tangent into a cone along a generator, its front edge alone and both edges together. The quadratures are tanh-sinh, converged to 1e-13; SMLib's own volumes of the passing analytic cases agree to 4e-9. A sphere is left out: a plane meets a sphere tangentially at a point, not along a seam, so it is not this ending. On SMLib 2fc375f eight fail, listed in KNOWN_FAILING: every chamfer that ends tangent (status 1001, SmFilletNx1Corner), the two rounds together (the corner patch 0.0374 at r2 and 0.128 at r5 out of the front face, and the rounds meeting with normals 180 degrees apart where their contact lines on the top cross), the same on the STEP-read peg (status 1001) and on the drafted peg (its corner refused as unsupported). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Rig: fillet corners graded curvature-continuous, the default to be Six fillet cases that pick their edges with no type, so they take the fillet's default, which the owner has ruled is to be curvature-continuous (G2) at every corner, with circular rounds kept as an option. Each grades every seam of the rounds and of the corner patch G2, on one valid body: - an oblique convex corner (a block drafted 15 deg); - a four-edge and a five-edge apex corner (pyramids lofted to a point); - a pocket's concave corner; - a mixed corner (a step: one concave edge, two convex); - a corner beside a cylinder (the top corner of a half cylinder). All six fail on SMLib 2fc375f, listed in KNOWN_FAILING: today's default is the circular round, whose seams jump in curvature by 1/r. On the five-edge apex the corner patch also meets two rounds at 8.45 degrees (G0). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Rig: the test-peg's front chamfer builds With the SMLib fork's smlib-tangent-ends (a rail's end on its side edge is the rail/edge crossing), report-peg-front-chamfer-d2 passes. Its line leaves KNOWN_FAILING, for the pin that carries that fix. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Rig: the curvature-continuous corner cases pick the curvature fillet The six corner cases added in 3a854104a took the fillet's default type, on the premise that the default would become curvature-continuous. The default stays the circular round, so each case now asks for the curvature fillet itself (type curvature: curvature-continuous sections and corner patches) and keeps its grading: every seam of the rounds and of the corner patch G2, one valid body. They are renamed from cov-fillet-g2-default-* to cov-fillet-g2-*. The oblique three-edge corner (a block drafted 15 deg) and the pocket corner pass. Four fail, as KNOWN_FAILING now says: - the corner beside a cylinder: the curvature fillet builds its sections only between planar faces; - the four- and five-edge apex corners: refused because the default setback is shorter than where the rounds' contact lines meet (3.90 and 3.51 mm from the apex); - the mixed corner: SMLib sets back a corner only where its edges are all convex or all concave. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Rig: the test-peg's concave chamfer, alone and after the front chamfer, builds With SMLib's tangent end as an event of the fillet's trace (blend-end-event 6d73e4f), the concave chamfer's rail on the cylinder ends where it crosses the seam along which the front face runs tangent into the cylinder, continued past the vertex, and its end rib on the front face is built from there. report-peg-concave-chamfer-d2 and report-peg-front-chamfer-d1-then-concave-chamfer-d2 pass and leave KNOWN_FAILING. The two chamfers together still fail, now at the mixed-convexity corner where they meet: its line says so. Rig against SMLib 0cc48bd: no area regresses (963/993 pass, 961 on a87c502), ladder 168/168, kernel lib only its listed failures. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: constant rounds of the exact classes, and a tee's round A plane cutting a cylinder or a cone at an angle, a sphere or a cone coaxial with the other face, a cone and a cylinder touching one ball, two pipes touching at a point: their rounds' centre lines are rational, so the rounds are rational surfaces of degrees fixed by the construction ((4, 2), (2, 2) revolved, (6, 2), (12, 2)). The tee's centre line is not rational; its round is graded on its volume. Volumes from the divergence theorem over the exact pieces, at rel 1e-6. The six that SMLib 0cc48bd traces are listed in KNOWN_FAILING with what they come out as. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the exact-class rounds pass on SMLib's classified exact rounds The rounds now come as the rational surfaces their classes give, closed ones as two faces split at their seams, the touching pipes' as four: one splines entry a face, each of the class's degrees. Their KNOWN_FAILING lines go. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * SMLib: pin 7ac037e (the new blend's tangent-end event, zero-speed G2 ends, and its exact-class rounds) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the fillets known-failing list is the 22 cases that fail on SMLib 7ac037e Twelve listed cases build on the new blend's end event and exact classes, or were already built on develop: they come off the list. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: #316's bottom rounds as large as the wall, or larger, shell with a step wall at the opening, not refused Where the round meets the open bottom the cavity's wall steps down along the bottom's normal, so the round meets it at 90 degrees and the opening is exactly the picked face. The cases are renamed and graded on the exact volumes, and come off the shell known-failing list. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Merge fixes: every crate and test target compiles on the merged tree, but for crates/geom's hlr world_state, view::bounds, home_camera and scene return Result on develop; new main code takes that with ? or session_world. New fixtures carry the spline's nurbs. ForeignCopy::of returns Result. occurrence_placement_with walks the path with its moves, since the placement index holds pending_moves only. The hlr port is separate and still to come: this commit does not compile as it stands in crates/geom/src/hlr. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk * Drawings hidden lines: read develop's B-rep records Edges come from the record's edge list, cut to their interval (C3::of_edge), and faces from its face list; a cylinder, cone, sphere or torus chart takes its bounds from where its NURBS form lies on its label (S3::of_face). A rigidly placed revolution has main's revolution chart; other placements stay refused. Moving a body to its centre goes through Brep::moved. Loops are read against the natural normal of the face's parameters where a chart wraps. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk * Hidden-line fixtures: build develop's records from the fixtures' data Fixtures keep their bounded curves and surfaces and their own edge numbers; a private builder makes the canonical record, and the local prepare puts the edges back in the fixture's numbering. Assertions are unchanged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk * Hidden lines: tests of the bounded edges, face charts and placed revolutions Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk * drawing-hlr doc: what is drawn and refused on develop's records Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk * hlr tests: a placed revolution is refused when its placement is not rigid The new model has one record for main's Revolution, which was drawn, and its PlacedRevolution, which was refused. An identity placement is now the former, so this test's fixture takes a non-rigid one. The refusal it asserts is unchanged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk * Hidden lines: a traced intersection is drawn only where its spline lies on both surfaces A leader off either surface is refused like a curve with no spline to follow. Tests: a traced rim drawn on the circle and plane within tolerance, the same leader 1 mm off refused, and kernel bodies with arcs through the production prepare against closed forms. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk * Hidden lines: kernel bodies through the production prepare against closed forms Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk * Tests from main: the world state is a Result here Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk * A blend's pick measures close edges on their curves, not their polylines A polyline can be a chord off its edge, more than two edges are apart near a tangent point. A pick exactly on a ball's rim took the straight edge the rim is tangent to, and solidcore built a chamfer of that edge with a clean check. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk (cherry picked from commit c786db6bf49804fb83a02f0eb7f83bd9f82fa643) * Merge fixes from the first SMLib test pass Model cache key covers the crates develop's kernel adds under doc (profile, smlib, step). A piece taking a name also takes the feature that made it: SMLib lists a cut's pieces in another order, and the swap left the name on a piece of the wrong feature. A replaced analysis keeps its status slot. A command with no world picks does not place the model first, so assembly.mass_properties answers for a flattening placement. FeatureCommon loses the touching key the merge added; only the contracts that read it take it. Two of main's tests listed as failing on SMLib, with why. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk * Merge fixes from the ui test pass and the gates Main's thread.direction keys go with develop's thread hand, which replaced them. Vietnamese for the messages develop added while main made vi a complete catalog. CGA and 1-bit themes set develop's comb and section hatch colours. A ribbon button with a persistent effect is pressed only while its tool runs, so persistent_ribbon_pressed alone decides how its effect is shown; other analyses stay pressed while on. Two of main's ui tests listed as failing on SMLib, with why. Gates: fixed thread tables become slices, one collapsed if, rustfmt. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk * A silhouette takes its facing from the surface's normals A flat triangle beside the outline can tip the other way from the surface it approximates, and its edges joined the outline. On SMLib's sphere that made 192 segments instead of the equator's 64, 100 curves and 95 profiles from the tight fit of #7989. Each corner's normal is used where it is close to the triangle's own; a mesh without such normals (none, zero, not numbers, or averaged across creases) keeps the triangle's normal, as before. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk * Clippy and rustfmt on the merged tree Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk * Stepwise open checks every feature under the session's mode OpenSteps::start evaluated under the default check mode, and finish kept those results under the session's mode: an each_step or off session opened in steps recomputed nothing. start now takes the mode (the app passes its session's), and a mode that changed before finish evaluates the design again under the new one. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz * Clippy without SMLib: the planar-sheet edge reader is built only with it Its one caller is in the smlib-only sheets module, so without the feature it was dead code and clippy -D warnings refused the kernel. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz * SMLib: pin d01d7b0 (the new blend's one Gⁿ section generator: the chord, circle and curvature sections, and the variable rounds as the union of their balls) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the section orders, chord, circle and curvature section, on planes and against a cylinder Eight fillet cases for the blend's cross-section by its order of contact with the faces, each graded on its analytic volume at rel 1e-7 and its exact continuity (the order, and not the next): - a box's top back edge chamfered 3 (G0), rounded r3 (G1) and curvature-rounded 3 (G2): the areas cut off the corner s^2/2, (1 - pi/4) s^2 and 113/756 s^2, the last by the default thumbweight's definition; - a pipe R10 dipping into a plate, its concave edge chamfered 2 (the chord between the contacts of the ball SMLib rolls for that setback, radius 1), rounded r2 and curvature-rounded 2, each section's added area by Green's theorem along the plate, the section and the pipe's arc; the order-2 section is built from the faces' feet of the point at distance d from both, which on the pipe are not linear in d; - a boss root curvature-rounded 2, the square corner's section revolved (Pappus); - a variable round r1 to r5 along a box edge (rel 1e-5): the balls' envelope is a circular cone, and the volume is the cone's sections integrated along the edge. Three fail today and are listed: the two curvature rounds whose faces are not a square corner of planes (SMLib's quintic blend curve, not the order-2 section: rel 6.5e-7 and 1.2e-5) and the variable round (great circles, not the envelope's: rel 4.8e-5). The other five pass on SMLib 7ac037e. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the curvature fillets' expected bodies from the order-2 section at thumbweight 0 SMLIB_BLEND_CURVATURE's section is now the order-2 G^n section at thumbweight 0. Between two planes square to each other it cuts A = 0.154192655384275 s^2 off the corner, its first moment about either face 0.0291753295725360 s^3 (Green's theorem on the section): the curvature cases built on that corner (862, 2708, every-box-edge, every-hole-top-rim, every-l-bracket, every-block-cylinder-crease, the three-edges-at-bar-corner reports, 3604's fillet) take their volumes from it by their own methods, the peg's front blend 23.3237146876 (its section along x up to the wall). Between planes the section's t^3 term vanishes (their feet are linear in the distance): the box edge case is exactly G3. The boss root is a certified fit, G3 to the plate and G2 to the wall at Continuity Analysis's tolerances: at least G2. The boss root and the pipe on the plate pass on SMLib's section and leave the known-failing list. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Curvature fillets: the section's default thumbweight is equal area, so the round's volumes are the circle's On the round's rails the order-2 section takes off what the ball's circle does: (1 - pi/4) s^2 at a square corner, first moment 0.0474559669443 s^3 (w = -0.5252123889). The kernel and engine tests and the curvature rig cases take their volumes from it by their own methods; the pipe on the plate from its own wedge (70.52878 degrees, w = -0.8544103493). The G2 corner patch's seam test is listed until the corner step. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: four G2 corners wait for the corner step: their patch meets the new section's rounds G1 at one face seam Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the turn at a corner of two rounds, Mitre (the default) and Swept, at a pocket's floor and a boss's base, by exact volumes A round's spandrel A = (1 - pi/4) r^2 and its first moment about its wall M = r^3 (5/6 - pi/4): Mitre adds L A -+ 2 M per edge (cut at, or run on to, the corners' bisector planes), Swept turns the section about a convex corner's edge, (pi/2) M a corner, and refuses a concave corner rounded less than the ball. The pocket's tangent chain round its R3 corners is a torus each. Graded to 1e-7, where Mitre and Swept differ by 6.6e-6. The Swept cases are listed until solid.fillet takes a turn. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: a junction family: oblique wedges 30 to 150 degrees rounded and chamfered (exact), bosses upright and tilted, pipe tees and a Y junction Four are listed with their causes: the equal-pipe tee (its exact conic-pair rounds meet at the ellipses' crossings in a corner the old corner code cannot join), the tilted bosses (1001, before the blend rework too) and the Y junction (refused for room at its triple points). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Variable rounds: graded by the union of their balls (their envelope), not the balls' great circles The smlib crate's laws and ladder 005, 006, 007 and 012 take the volumes the balls' envelope removes; the law with a corner is its own test, listed as failing until the corner step. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel tests: variable rounds graded by the union of their balls, the removed volume to 1e-4 of itself removed_by_balls integrates, in each plane square to a right-angled edge, the corner the union of the balls leaves (by rays from the edge, the least entry over the balls), cut to the body's section. The law with a corner through a middle point is its own test, listed as failing. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel tests: a spline radius whose balls fold over one another at its peak is refused Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: the variable round on its cone passes (the round is the balls' envelope) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tests: three rounds of different radii at a corner listed: the corner's transition kinks with the balls' touch circles Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Ladder: the variable rounds graded to 1e-6 by the union of their balls; 012 by its law going on past the edge At the default 1e-3 the great circles' volumes (4e-6 off) passed too. SMLib builds each within 1.6e-7. The golden takes the new volumes and areas; counts unchanged. The G2 corner test listed as failing passes on SMLib's step 3 and leaves the list. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Reference tests: the variable rounds 77, 78 and 81 pass on SMLib d01d7b0; their known-failure marks come off The new section builds their edges on the surfaces, so STEP export no longer finds them 4.6e-5 to 6.1e-5 off. develop's Reference tests (60393a718) report all three as passing while marked. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * STEP import: a ball's halves whose seams are off each other's quarter lines each form within one turn A sphere split into two halves along a circle about its axis, each half covering a pole with no seam, gets a seam per half from the first vertex of its loop to the pole. The circles between the halves group their frames so they turn together, and when the two seams are not a whole number of quarters apart no one turn fits both: the group kept its frames, a half's form ran past one turn, SMLib's trim (SMLib and solidcore alike) across the form's end crossed the face, and the mesh folded over the ball (a rotor's ball showed torn; its half had 196 times its area in triangles). When no one turn fits the group, each spilling face is now turned on its own to start on a quarter line. On the rotor file this also clears three other faces that were filled leniently and a 0.076 mm edge gap; regression test in step_in/tests.rs with the area and volume of each half. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz (cherry picked from commit b3188e005d427043b918267449c2336a1777e54f) * SMLib: pin 5e8c9c1 (the new blend's corners: Ball and End/Join; exact fold and room checks with fit sizes; overflow in place; the round as its definition) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel tests: a law's dip shows its corner ball's sphere, a peak's two rounds cross (the reasons had them swapped) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Reference tests: the variable rounds 77, 78, 80 and 81 expect the union of their balls A variable round is the envelope of the balls rolled along the edge, which takes less than a quarter round in each section. The expectations are now that union, the law continued past the edge's ends along its end slopes, integrated by Gauss-Legendre panels in x and t; 2, 4 and 8 panels agree to 1e-9 of the body's values, and 77's removed volume matches a brute-force union of balls to 2.5e-10. The nearest-ball search now scans the balls the ray meets around ball x (|x - s| < r(s) sqrt(sin 2t)) on their own, which near the faces and where 78's radius closes to 0 are narrower than the global scan's step. Regenerating keeps each case's known_failure. 79, a constant radius, is unchanged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Known failing: the law corners' kernel and crate tests and rig 1207 pass on SMLib 48ea616 SMLib builds a variable round's law corners as its balls' union (the corner ball's zone at a dip, the sides' crossing at a peak): the kernel's corner through a middle point (39.5410) and the crate's 4 -> 2 -> 4 law (39.5421) pass. Rig 1207 (the bar's top edge rounded after the boss's arc, r0.5) builds and grades on the same SMLib; it failed on c820346. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel rig: every fillet and chamfer case rounds its tangent chain The owner's ruling of 2026-11-01: the rig and the ladder round with tangent_chain true, how a user's default pick behaves. The 38 fillets-area recipes and the ladder's 07-fillets/016 and 018 that passed false now pass true. The shell recipes keep theirs: a shell's tangent_chain is its open-face chain, a different feature. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: the partial-selection cases kept as -partial-chain copies, tangent chain off Where a case's point is one edge of a tangent chain rounded alone, a copy keeps tangent_chain false as its own case (SMLib rounds exactly the picked edges, ending at the smooth vertex); their expectations stay as they were, to be re-derived: - fillets/1207-fillet-box-end-edge-into-unblended-round-partial-chain; - fillets/every-fillet-after-fillet-curvature-front-then-side-r3-partial-chain; - fillets/1207-fillet-bar-top-edge-after-boss-arc-round-partial-chain, renamed from ...-no-tangent-chain: with the chain on it is exactly 1207-fillet-bar-top-edge-after-boss-arc-round, which the rig already has; - ladder/07-fillets/020 and 021, the r5/r3/r7 and r5/r3/r2 corners (016 and 018) with the r3 on its edge alone: with the chain on, the r3 runs on along the r5 round's end arc and down the vertical edge the third round was to take. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: the concave arc between the block's tangent sides kept with tangent chain off fillets/every-block-cylinder-tangent-concave-arc-r2-partial-chain: the pick takes one piece of the concave half circle, which SMLib splits; with the chain off its other pieces are left out, and the blend is refused at the piece's end (the base gate's outcome). With the chain on the case rounds the whole half circle. The copy keeps its expectation, to be re-derived. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: two chains that now build graded by their exact volumes With the tangent chain on, two cases round more than the edge they pick, and their old expectations were the single edge's: - 1207-fillet-box-end-edge-into-unblended-round: the r1 chain is the end face's top edge, the r3 round's end arc and the back upright; 34 A + (pi/2) A (3 - c) by Pappus on the arc: V = 7953.139216 (it built 7953.139216, the old 7957.505 passed only inside 1e-3), 10 faces. - 851-fillet-top-front-then-front-left-upright: the upright's chain runs up the first round's end arc on x = 0 and along the left top edge, so the corner becomes the R2 ball's eighth: V0 less the first round's spandrel to the wall (35.344727) less 27 (4 - pi) + 2 pi/3: V = 9530.777979 (built 9530.777987), 10 faces. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: a curvature chain round a round's end refused for its size; the concave half circle builds - every-fillet-after-fillet-curvature-front-then-side-r3: the side edge's chain runs round the first curvature round's end curve, whose radius of curvature has a weighted mean of 3 (its setback) and is unbounded at the ends, so somewhere below 3: the size-3 blend's contact line folds back on itself. Refused, "larger than the faces beside its edges allow", as ladder 07-fillets/016's r7 on the r5 arc. (It was solid or refused for running on tangentially.) - every-block-cylinder-tangent-concave-arc-r2-no-tangent-chain: the chain takes every piece of the half circle and ends at the convex edges it runs on into; it builds the analytic 19091.9620, so the outcome is solid (the refusal alternative was the chain-off one's). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Known failing: two 851 chains whose corner piece is a ball of tube-centre radius 0 851-fillet-arc-then-top-front and 851-fillet-top-front-then-upright: with the tangent chain on, each R2 chain runs along the end curve of an R2 round on a curved face (the arc round's end on the front face; the first round's end on the wall), where the rolling ball sits on that round's own centre line, so the piece is the ball about (39.2538, -19, 8): the three-edge rolling-ball corner. SMLib fails with status 1001; the same piece on a plane end arc builds (front-left upright). Expectations unchanged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Ladder: 016 and 018 refused, their r3 chain takes the vertical edge; 020 and 021 recorded With the tangent chain on, 016's and 018's r3 runs on along the r5 round's end arc and down the vertical edge, so the third pick (60, 40, 8) is 3 from both of that round's contact lines and names no edge: refused, asking for a point along one edge. The corners they were made for are 020 and 021 (the r3 alone), whose golden entries are 016's and 018's (021 measured on f12a101). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel tests: three rounds at a box corner end on one rational patch on the ball's sphere, not an analytic sphere SMLib's Ball corner is always the rational patch exactly on the sphere (owner ruling, blend design §23), so the corner counts as an 'other' face beside the three cylinders and six planes. The removed volume still checks the corner against r³ − πr³/6. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: the curvature round on a pipe on a plate is listed: a seam grades G3 where exactly G2 is wanted Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel tests: the box-and-fillet wire fixture records the round's cylinder frame as SMLib now keeps it The round's cylinder keeps the frame it was made on when it is turned (SMLib's SwapUV no longer re-derives it): its origin sits at x = −20 on the same axis line, (x, 2, 8) along x, radius 2. Same cylinder; one number in the record moves. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Known failing: two kernel tests' reasons as they fail on SMLib 5e8c9c1 (a partial selection running into an unblended tangent edge) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: two curvature rounds get 600 s, past the 180 s default, while G2 certification is slow (tangency-labs/smlib#96) On the CI runners the boss root and the hole rim, both size-2/size-1 curvature rounds, build correctly but take more than 180 s: the order-2 section's span certificate and the round's definition are evaluated station by station. The per-case limit is the one the thread cases use. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Lid ring sketch test: find the ring under the pick, not by main's kernel's name On SMLib the lip join's exact history names the lid underside's ring a piece of the lid's own start (F14:start#[...]), as the naming rule says for a face that came from the feature's input; main's kernel named it after the case's top it rests on (F2:top). The test looked the ring up by that name and so stopped before the attachment it guards. It now takes the underside piece under the pick point, which the cap certificate attaches on either kernel. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz * Viewport culling test: each box's triangles from its mesh, not 12 SMLib meshes a 10 mm box in 108 triangles, so the hard-coded 12 a box stopped the test before it reached the culling. The expected counts are now each body's span in the scene. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz * Timeline chip test: a fillet that really reduces The R20 fillet with fit reduce on one top edge of a 10 mm box builds on SMLib without a reduced-radius warning, so the fixture had no warned feature. It now rounds the four vertical edges at R6, reduced to the full round (5), as the copy-warning test beside it does, and checks the warning says so. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz * Oracle: 34-chamfer-then-fillet and 35-fillet-curved-curved pass on SMLib 5e8c9c1 (their STEP edges are on their surfaces) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Known-failing: the shell of a fully rounded box opened at one face fails on SMLib 5e8c9c1 (tangency-labs/smlib#102) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Known-failing: the action matrix's oblique cylinder cut fillet passes on SMLib 5e8c9c1; two shells still fail Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: the boss root's curvature round gets the rig's 1800 s cap: on the CI runners, 8 cases at a time, its G2 certification passed 600 s (tangency-labs/smlib#96) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: a case's continuity can ask for an order per seam (seams: [{order, edges, exact}]) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: the pipe on a plate's curvature round meets the plate G2 and the pipe G3, 40307.8856312 (option B's order-2 jets, tangency-labs/solidcraft#10845) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Edge names: a seam names its one face once; the curve-id test reads every edge kernel-neutrally A seam's two sides are the same face, and edge names list each face an edge bounds once, so SMLib's extruded circle names its side's seam F2:side:c1, with no separator. The name grammar now says one face also means a seam. The #5858 test no longer counts one '|' an edge: every part of every edge name is a whole face name of the edge, one per face it bounds, two for the rims and one only for the side's seam (checked to run bottom to top on the circle). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz * rustfmt on the merged tree Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz * Known failing on SMLib: two of main's new tests assume truck's box mesh and fillet torus Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz * SMLib: pin f916a8d (a round on a definition face is its definition; the G1 setback fill certified convex, setbacks too short refused naming the least; the G2 certificate halves a span no level can certify at once) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Fillet: a setback too short for its corner is refused naming the least that builds (smlib_blend_fit_size) SMLib's setback corner takes a G1 fill only once certified convex, and refuses a setback too short for that as SMLIB_ERR_NO_ROOM with SMLIB_FIT_SETBACK_AT_LEAST, the smallest setback that builds. The kernel reads it (solidcraft-smlib binds smlib_blend_fit_size) and names it; the Fillet dialog says it in plain words. Other room refusals keep their words. The r5 box corner set back 5.5 is refused naming 5.962, which builds. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel tests: three rounds of different radii at a corner meet in SMLib's setback corner Each round runs whole to its section square to its edge at its setback (the owner's rule, at least 1.5 r, scaled to the least at which the G1 fill is certified convex), and the hole is the setback split: one patch per round and the triangle in three quadrilaterals, 15 faces, G1. Outside the box the sections span the body is the three strips', so its volume is theirs within that box's. A later r3 round at the mitred corner makes the body all three at once make (7928.142563938, 15 faces), as the engine and the model-cache tests have it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel tests: SMLib's own corner between curvature rounds is curvature continuous, as the G2 patch is Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: the boss root's and the hole rim's curvature rounds take the default timeout again (37 s and 34 s on the box under the rig's parallel load, tangency-labs/smlib#96) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Agents: model decisions use exact geometry; a mesh is for display, export, previews and mesh bodies Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * xtask: mesh-decisions, model decisions use exact geometry; today's 176 mesh decision sites are listed and the list only shrinks Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Sheet metal: cuts and holes pass over sheets and bends by their exact boxes, never a mesh's A primitive cut skips the sheets kernel::apart (exact bounds grown by the record tolerance) finds clear of its tool; the bend check leaves the clear case to kernel::boolean, which answers it from the same exact boxes with no intersection work. The mesh-box helpers are gone, and their four lines leave xtask/mesh-decisions.txt (172 sites left). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Agents: AGENTS.md loses a stray merge-conflict marker line at its end Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Locales: Vietnamese for the setback-too-short refusal, now that vi is a complete catalog Main made vi a complete catalog; develop's new message (ui.fillet_error_setback_short) had no vi entry, so every_complete_catalog_carries_every_english_message failed on the merged tree. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: exact volumes for 1213's bent-tube round and 4782's bar round, rel 1e-6 1213: the loft is a cubic skin through the five sections (ellipses between them), not a torus; its volume 131601.597487935 by quadrature less the exact rolling-ball removal 233.662461919 gives 131367.935026 (was a Pappus estimate on a torus, 131360.148, at rel 5e-4). 4782: the section's area in closed form, 25 pi/3 - 5 sqrt(75) + 25, so V = 630.2934873 (was a grid estimate, 630.293125). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz * Kernel rig: the boss root's and the hole rim's curvature rounds take 600 s again: under CI's parallel load they pass the 180 s default (develop 820b7b6) They take 37 s and 34 s alone on the box, but CI runs 8 cases at once on slower runners. Their G2 certificate cost is the open item (tangency-labs/smlib#106, moved to solidcore#2344). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * After the merge: clippy's auto-deref, and the mesh-decisions list for the merged tree Develop's list was taken on develop alone. Main's code (tap-marking reach, cut and hole box checks, join pieces, print faces, placed measuring, selection items, imported mesh payloads) and the branch's own exact_edges and named_vertex use meshes too; three listed functions were renamed by main (face_outline and plate_recesses into FaceSlice, paste into build). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz * After the merge: main's new tests on the SMLib kernel - Cut To the far side of a curved wall (#8634): the tool stops past the first crossing of the face ahead of the profile; SMLib's whole bore is one face that a line crosses twice, so the single-crossing rule found none and the cut took nothing. - Clearing view analyses goes through refresh_display, as main's #10687 made the others, so an open feature editor keeps OK and Cancel after Zebra. - vi, a complete catalog on main, gets the setback-too-short message. - fillets/KNOWN_FAILING: 4782's cause is now its continuity check (SMLib f916a8d builds the expected volume). - Known failing, as main's tests assume truck: the spline wall's spans as one mesh patch, a hole touching an edge at a point leaving one body, and a copy of a copy's triangles matching a fresh mesh. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz * Twisted sweep: circles about a straight path are exact cylinders (solidcore#2184) A twist about a straight path maps a profile circle centred on the path's line onto itself, so its swept wall is exactly the cylinder. The skin through the stations stayed within 3.9e-9 of it (6.6e-9 on the outer wall), and a boolean with another body on that cylinder failed with status 1001 (solidcore#2184; the kernel's handling of a B-spline face lying on a cylinder stays open there). sweep_controlled now builds those walls exactly when the path is lines along the profile's normal and there is no end scale or rails: a profile whose every loop is such a circle is swept untwisted, and such holes in another outer loop are cut as exact cylinders from the skinned sweep of the rest. Other loops, and an axis-centred arc inside a loop of other curves, are skinned as before; a failed cut falls back to skinning all. Regression test in smlib_sweeps_tests.rs: #2184's tubes joined at 10, 16, 18, 20 and 30 degrees give one closed body of 11.5625 pi with cylinder walls; a twisted hexagon with the bore keeps a cylinder bore. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SdcgEtwSrdwZxqTQp5MfnU * After the merge: a hole that misses is found by exact boxes; a face is a one-face patch; main's mesh-box helpers gone - `hole_misses` (main's #10701, through brett's branch) decided from the targets' mesh boxes. It now uses their exact boxes (`Body::exact_bounds`). An unknown box still leaves the hole not known to miss. - With #10303's two shortcuts and `hole_misses` off the mesh, `body_box`, `mesh_box` and `padded_box` have no caller left, and are deleted. - `project`'s intersection link passes its one face to `meeting_edges` as a one-element patch. This branch picks one face, not #9009's mesh patch. - xtask/mesh-decisions.txt drops the six sites that no longer use a mesh here: `apply_traced_with`, `cut_end_past_face`, `beyond_cylinder_reach`, `hole_misses`, `body_box`/`mesh_box`/`padded_box`. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * After the merge: split_move's Result reaches its callers; to_local's duplicated move check goes `frames::split_move` returns a Result on this branch: an unplaceable model is an error, not a silent no-split. - Move/Copy of a component (main's #9914) propagates it, as its other calls do. - `to_local` had the solid.move check twice after the merge (brett's Option one and ours). Ours stays, after the no-picks/not-placed return. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * After the merge: main's two new tests take world_state's Result, as the rest of their files do Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Native B-rep: a ball patch is its own surface kind, read from and written to SMLib's flat kind 6 SMLib's flat arrays now carry the corner of three equal rounds as `SURFACE_BALL_PATCH` (kind 6): its net as a NURBS face's block, with its sphere's centre and radius as its definition (ids 36 and 166). The record reads it as `ball_patch {center, radius}`, a label like the analytic kinds, with the net as its `nurbs`. A plain sphere with a form won't do: the net is not a piece of SMLib's sphere NURBS, so SMLib's `IsNurbSurfaceSphere` would refuse it. Written back, a ball patch is kind 6 with the same definition, which SMLib takes once its net is certified on that sphere. Elsewhere: - Offsets classify it as its sphere, so its offsets stay exact and collapse at the centre. - Face kinds count it as a sphere: fillet_three_edges_at_a_corner's corner is now `sphere`, no longer `other`. - STEP, which has no ball-patch entity, gets the net as the face's B-spline surface, pcurves included. - Iso curves and SSI of the label are refused; the face's form is what evaluates. Test: a_rounded_cubes_ball_patches_go_round_with_their_spheres. The cube's eight corners are ball patches about the corners pulled in by r. Points of each patch lie on its sphere to 1e-12. The patches are kind 6 again after import, with the same definitions bit for bit, and the closed-form volume holds. Format: pending/ball-patch-faces.rs. Docs: docs/native-brep.md and the rig README's `surface_types` (`ball_patch`). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * SMLib: pin v1.1.0-alpha (a18bbe5): the generic blend's step-4 corners, the Ball's sphere patch through the flat arrays, all-target CI Since f916a8d: - #120: every target again, plus the warnings fix; - #121: the Ball's patch as flat kind 6 with its sphere, read by the previous commit; - #122: tests gated on counts; - #123: the Mixed corner; - #124: the End at a smooth vertex; - #125: four or more rounds, and open setbacks; - #126: the equal-area thumbweight guard; - #127: the trunk merge. The SMLIB_PREBUILT checksums are from the release prebuilt-a18bbe5…, written by `scripts/fetch-smlib.sh --pin`. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * smlib export tests: rustfmt's line for the rounded cube's edge midpoints Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: the fillet and ladder results on SMLib v1.1.0-alpha, the new failures recorded with their reasons Fixed (off the known-failing list): the Mixed corner's peg cases and the concave arc with the front top edge (smlib #123), and the 40° boss junction (smlib #124). Eight cases in all. New failures, recorded as they are, each with its reason. They passed on f916a8d. - **Six cases grade a blend seam G0 where G1 (or G2) is wanted,** at the end of the round's contact seam, after smlib #124's End at a smooth vertex. Two of them also shift in volume. - **Four cases come back unsupported** after smlib #125, which leaves setbacks to the Setback's corners only. - **Ladder 07/012** makes 9 faces, 20 edges and 13 vertices, where its golden had 8, 18 and 12. Its golden entry is the new result, with the reason added. Whether each change is by design or a defect is being established. A defect is fixed in solidcore, where the End and the Setback are being brought over (#2364, #2365), not in the frozen SMLib. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel ladder: 07/021 and 06/018 recorded as they are on SMLib v1.1.0-alpha, each with its reason Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel ladder: a golden case marked unstable is gated on its status, and 06/018 is marked On SMLib v1.1.0-alpha, 06/018 makes 597 or 594 edges from the same input: the union's post-process keeps pointers to edges it has deleted. A golden entry's `unstable` reason makes the gate compare that case's status only and name it in its output; recording keeps the reason, and only an edit of the golden removes it. v1.1.0-alpha.1 fixes the cause and removes the mark. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * After the merge with main: its new code on develop's exact bounds, types and thread fields - The sheet cut's cull (#10301) and the tapped wall's (#10227) use each body's exact box (`exact_box`), not its display mesh. - model.threads replies with develop's thread fields: form, hand (right, left or both) and starts. - surface.boundary's schema checks a network curve's continuity as the handler does, and words a list entry's error as it does. - Main's new tests take develop's Hole fields and world_state's Result. - mesh-decisions: contact_sweep's triangle check is now `depth` (main split `hits`). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Known failing: the 14 cargo tests SMLib v1.1.0-alpha fails, with what each sees; two cases that pass now Develop's CI after the a18bbe5 pin (run 41522001173) fails 14 tests that passed on f916a8d, and passes two listed ones. Each new line says what the test sees on v1.1.0-alpha; v1.1.0-alpha.1 fixes the setback hole's cause. shell_tangent_chain_that_opens_every_face_explains_how_to_keep_walls and oracle 37-pyramid-apex-blend pass and leave their lists. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Cargo.lock: develop's profile, smlib and step crates at main's 0.30.1 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: main's six new sketch-only commands are exempt from a kernel case sketch.construction_line (and its horizontal and vertical forms) and sketch.spline.insert_point, remove_point and reverse change only the 2D sketch. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Cuts leave the bodies their tools can't reach, by exact boxes (#10225 on exact geometry) - The per-target cut loop skips a body whose exact box lies clear of every tool's, as main's version did with mesh boxes. The sheet culls (#10226, #10301) and this one now leave the far sheets and bodies alone: a_cut_leaves_bodies_it_cannot_reach_as_they_were passes and leaves the known-failing list. - a_cut_still_runs_where_its_tool_touches_grazes_or_meets_a_curved_face: a tool 0.5 µm clear of the block is now left out (exact boxes; 0.5 µm is far past the bodies' tolerances); touching and 0.1 mm in still cut. - Known failing, with reasons: main's edge lookup by a stored point (#11286, on the display mesh) is not taken; SMLib refuses the wrong-way chamfer for its tangent chain first. - EXEMPT: main's eight new sketch-only commands. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: main's new view, rendering, appearance and settings commands are exempt from a case 62 of the commands main added change no geometry: the view and render panes, rendering lights and results, appearance tools, settings profiles, point clouds (drawn as points, never a body), the selection, two sketch edits, component links and History bar visibility, edit.repeat, timeline.play, inspect.compare_picture (a picture against the outline), and component.paste_from_design, which pastes the app's cross-window clipboard that no command fills. Each joins EXEMPT's first section under its family's reason. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: construct.plane.axis_point gets construction cases The plane through a box edge and its far corner, graded against its closed-form normal (0,-2,3)/sqrt(13) through the origin, and the refusal of a point on the axis. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: assembly cases for mass properties, align, find limits and moving items between parts - assembly.mass_properties: two boxes (2 g/cm3) in a rigid group: mass 0.006 kg, centre (18.333,5,5), inertia diag(0.1, 1.0333, 1.0333) kg mm2 by the parallel-axis theorem. - occurrence.align: a block's end face onto a base's top face: a quarter turn about y, centre (70,20,20), box (65,15,10)-(75,25,30). - joint.find_limits: a slider between two stops: min -20, max 10 mm. - component.move_features, browser.reparent and component.move_sketches.to_parts: items moved into a turned and moved part keep their world place (volumes, centres and boxes by hand). The mass case assigns a material it creates, so material.create and material.assign leave EXEMPT. PATHS names the new command modules. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ * Kernel rig: export and print face cases in the import area - file.export_step, export_stl, export_3mf, export_obj: a 30x20x10 box written and read back (the meshes converted to a solid): V 6000, A 2200, 6 faces, box (5,-10,0)-(35,10,10). - file.export_urdf: a hinged arm on a grounded base: 3 links, 2 joints, and the base's mesh, written in metres, reads back as the 1 x 0.5 x 0.2 box (V 0.1, A 1.6). - body.print_face: a cylinder's flat end is accepted, its side refused. PATHS adds the URDF writer and the print face modules. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: brett19 <brett19@gmail.com> |
||
|
|
03b8f4138b |
New designs save as .sc; .solidcraft files still open (#7325)
* claim: new designs save as .sc Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * New designs save as .sc; .solidcraft files still open and keep their name on Save DESIGN_EXT is now "sc"; DESIGN_EXTS lists sc, solidcraft and solvecraft and every open path (dialogs, drag-drop, recent files, CLI, MCP, links, the web picker) accepts all three. Save of an opened .solidcraft file writes that file; Save As, autosave, recovery and crash reports use .sc. Windows, macOS and Linux register .sc alongside the older extensions. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Update UI tests for the .sc default extension Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
8071096a99 |
Docs: refresh every UI screenshot, GIF and video from the current UI (#6763)
CI / Dependency advisories (push) Has been cancelled
CI / Select checks (push) Has been cancelled
CI / Format and repository checks (push) Has been cancelled
CI / Quick compile (push) Has been cancelled
CI / Native Linux Clippy (push) Has been cancelled
CI / Build tests (push) Has been cancelled
CI / Native Linux tests (push) Has been cancelled
CI / Action matrix (1/16) (push) Has been cancelled
CI / Action matrix (10/16) (push) Has been cancelled
CI / Action matrix (11/16) (push) Has been cancelled
CI / Action matrix (12/16) (push) Has been cancelled
CI / Action matrix (13/16) (push) Has been cancelled
CI / Action matrix (14/16) (push) Has been cancelled
CI / Action matrix (15/16) (push) Has been cancelled
CI / Action matrix (16/16) (push) Has been cancelled
CI / Action matrix (2/16) (push) Has been cancelled
CI / Action matrix (3/16) (push) Has been cancelled
CI / Action matrix (4/16) (push) Has been cancelled
CI / Action matrix (5/16) (push) Has been cancelled
CI / Action matrix (6/16) (push) Has been cancelled
CI / Action matrix (7/16) (push) Has been cancelled
CI / Action matrix (8/16) (push) Has been cancelled
CI / Action matrix (9/16) (push) Has been cancelled
CI / Action matrix determinism (push) Has been cancelled
CI / Property tests (many cases) (push) Has been cancelled
CI / Doc tests (push) Has been cancelled
CI / Reference tests (push) Has been cancelled
CI / Windows D3D12 FXC shaders (push) Has been cancelled
CI / Windows app startup (push) Has been cancelled
CI / ci (push) Has been cancelled
CI / Compile WebAssembly (manual) (push) Has been cancelled
CI / Compile RISC-V (manual) (push) Has been cancelled
Docker / image (push) Has been cancelled
Pages / build (push) Has been cancelled
Pages / deploy (push) Has been cancelled
Lists / Design format changes merge cleanly (push) Has been cancelled
Lists / Lists are sorted one item per line (push) Has been cancelled
* Docs: refresh every UI screenshot, GIF and video from the current UI Re-record the README demo, the rover build, the sample plate and the class-A surface pictures with 0.22.1 in the default dark theme. The demo script is fixed for the current sketch dimension boxes and MCP file limits, and the rover replay and class-A pictures now have scripts. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Docs: cut the idle time out of the demo and rover recordings The README demo plays at 6x and the rover replay at 15x with a constant-rate camera orbit, with the stretches where nothing on screen changes cut out by the new trim_idle.py. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
9e6e0b8df1 |
Render workspace: complete experimental ribbon, resources and effects integration (#5493) (#5494)
* wip(render): reconcile completed material and image pipeline source with 0.20 (#5493)
Source-only integration reference for staged review, not a merge-ready aggregate.
Donor: 0xlillith/solidcraft@aea20b0115.
Upstream:
|
||
|
|
b7b25f9e2b |
Render workspace: first basic delivery to main (#6050)
* Normalize UI container violation paths across platforms (#5599)
Report repository-relative paths with forward slashes so diagnostics and the existing nested-package regression assertions agree on Windows and Unix. Keep the container detection rules unchanged.
Validation: official ui-containers gate and all seven focused xtask tests passed; rustfmt and diff checks passed. Only xtask/dependencies were compiled; no application build or heavy tests.
(cherry picked from commit 44b58d8e103a5fbc816ebf7c22b8de768ddf592b)
Scoped render-branch prerequisite from #4507, coordinated under #5493. No unrelated translation/kernel changes are included. Fresh Windows fmt, seven ui_containers regressions and the production container gate pass on render base
|
||
|
|
63d81cc096 |
Motion Trace: regenerate kept curves only when inputs change (#5248) (#5270)
* claim: #5248 * feat(motion): regenerate kept traces when source inputs change * feat(motion): add a parametric Chebyshev trace demo * perf(joints): reuse face measurements across motion samples Face-centred joint origins called Body::faces on every solve, bypassing the reference-mesh reuse used for rigid placements. Share face measurements with unchanged model geometry at the existing tolerance, while guarding replaced bodies and applying offsets after the cached measurements. Cover repeated named/nearest-face solves, shape edits, retained snapshots and direct replacement with deterministic work counts. The 145-point Chebyshev dimension and range updates retain identical sampled and interpolated curves. * perf(naming): skip preparation for cached face names Both face lookup paths spawned fresh workers over every body even when their name cells were ready. Prepare only cold cells, with direct handling of zero or one cold body. Preserve the existing parallel naming path and all face selection semantics. Deterministic regressions cover repeated picked and unique-name lookups, misses, partial warmup, renames, snapshots and moved copies. Release Chebyshev medians fall from 859 to 50 ms for a dimension edit and 871 to 34 ms for a sweep edit; all 145 samples and interpolated points remain identical. Full cargo xtask ci passes with RUST_TEST_THREADS=4 and the existing local Windows validation overlays. |
||
|
|
316b49cd84 |
Extrude from a whole face rounded by fillets: join, and cuts whose walls only touch (#2040) (#2041)
* Extrude: a join from a whole face rounded by fillets sweeps the face itself (#2040) A face's sketch fits an edge that is no line or arc (the quarter-ellipses where fillets meet a slanted face) as splines a hair off the body's edges, so a join from the face touched the body along a face it did not match and failed with "boolean Union: no result" after minutes. When the profile is a whole planar face of the one target, the join now sweeps the body's own face, which shares its edges and is sewn on along it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Extrude: a cut into a whole face keeps the walls that cut and moves the others off (#2040) A cut from a whole planar face sweeps walls from each of its edges. Where the face beside an edge turns away from the sweep (n_N . -n_P >= 0) the wall only touches the body along that edge, or lies in the face beside it, and the boolean failed on it with "no result". The cut now keeps the walls that go into the body, exactly (the body's own edges), runs the outline round the others well outside the body, and starts a little out from the face. A cut whose walls all only touch takes a slab beyond its depth plane. Not covered: a cutting wall tangent to the face beside a touching one (a round's wall meeting an end face, as in the issue's part); the boolean still fails there. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Extrude: leave a whole face outlined by lines and arcs to the profile's own tool Only a face whose outline the projection had to fit needs the body's own face as the tool. A square drawn over a box's top already meets the body exactly, and the swept face lost the names a sketch on the new top attaches to (stacked_face_tests, #489). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Run the whole cut tool from a face under the kernel guard (#2040) Review: `builder::vertex`, `builder::line`, `Face::try_new` and `builder::translated` ran outside `crate::guard`; only the sweep was guarded. `cut_tool` now runs all of it under one guard. Adds an end-to-end test of a cut into a face the body stands out past below it (the block's top strip between its rounds): it takes only what lies over the face. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * test: the slab cut of whole_face_tool, on a spline prism (#2040) A prism on a closed spline standing on a wider plate, cut 3 into its whole top face: the slab takes the face's area times the depth and leaves the plate alone. A test-only counter asserts the slab was the tool, so the test cannot pass through the profile's own tool. Shortens the name of the rounded block's top-face cut test. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Kernel: the face's outline as a Vec now that polyline returns a closed chain (#2040) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
9e15995a74 |
A cut ending in a face of its target no longer leaves the hole closed by a skin (#2827)
A cut whose tool ends exactly on a face of the target (a hole cut from a pocket's floor up to the plate's top face) could come out of the general boolean with the target's face whole over the hole and the tool's end face under it: a skin of no thickness that keeps the hole closed. No volume shows it and the sampled membership checks see the hole either way, so the result was kept. The result check now refuses a body with a planar face lying back to back on another of its own planar faces with nothing behind part of it (`coplanar::has_skin`), and the retries take the cut. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
926a7353a3 | Sheet metal: possible to create flange on a flange (#3274) | ||
|
|
759e22b582 |
Try exact local cuts after invalid empty numerical results (#1765) (#1858)
Two empty numerical cut attempts stopped the boolean retry sequence before the exact geometric strategies ran. When the result guard refuses that empty candidate, the exact strategies (sliced planar, pushed walls, local prism, sphere lens, seam halves) now try the cut first; if none recovers it, the original empty candidate and diagnostics are kept, before any displaced numerical retry. Rebased onto main as one commit (the branch's own changes, its merges of main dropped). The only conflict was the new engine regression test next to main's #1985 STEP export tests in boolean_regression_tests.rs; both are kept. |
||
|
|
3ffd8efffc |
Loft: preserve holes through matching sketch sections (#2435) (#2447)
Rebase the complete PR change onto current main, preserving changes previously stored in merge commits. |
||
|
|
ee67ed53af |
STEP export no longer hangs on a box with a screw hole (#1985) (#2243)
* claim: #1985 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01L15TLCjpXsQdp8ovC4ZacH * STEP export no longer hangs on a box with a screw hole (#1985) The export reads its own STEP text back, and meshing the read-back screw hole never finished. On a seam cylinder the boundary walk projected points to angles up to 5e7 rad apart and moved each by two turns at most, so the 11-point loop spanned millions of turns and the polyline closing it across the seam had 4.3 million points. Each projected parameter is now brought to within half a period of the point before it, whatever the gap. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01L15TLCjpXsQdp8ovC4ZacH * Second #1985 regression: the reporter's flanged enclosure The issue's reporter delta-debugged a second design whose STEP export hung on main: a flanged enclosure with two standoffs and no screw hole. It hangs without the get_mindiff change and reads back with 29 faces and the same volume with it. Both tests share the read-back checks. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01L15TLCjpXsQdp8ovC4ZacH --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: bherbruck <brennen.herbruck@gmail.com> |
||
|
|
54b00fa7b1 |
Chamfer straight lips at tangent wall junctions (#2408) (#2490)
Thanks @fkirill. |
||
|
|
28d67fb577 |
Regression tests: a cut short of a face keeps its skin, and the issue's pleats mirror and build at the far end (#1669) (#1730)
* Extrude: a profile edge short of a face is not grown through the skin beyond it (#1669) A cut or join profile edge that lies on a face of the target is grown off it by 0.5 % of the body, so that the tool's wall does not lie in the face. Whether it lies on a face was judged half a growth step either side of it: empty just outside, material just inside. An edge 0.25 mm short of a 3.75 mm wall's far face reads the same, and the growth cut through the skin it should leave (55 050 mm³ instead of 56 130 on the test's wall). Now the space just past the edge, 1e-4 of the body out, must already be as the operation wants too. In #1669, the pleat's window built directly at the far end of a case opened through the wall at 3.75 and 4 mm, while its mirror, built without the growth, rightly left the skin and then failed to join the loft through it. Built either way, the window now leaves the skin. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Regression tests: the issue's pleats mirror and build at the far end (#1669) The issue's battery case at 3.5 mm: the mirror of the window and the pleat builds (it needed #1670's meshing of twisted faces), and at 3 mm the same window and pleat built directly at the far end of the finished case join it (they needed #1667's end rounds). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Far-end pleat test: the direct build matches the mirror's volume Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Erikas <erkexzcx@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: bherbruck <brennen.herbruck@gmail.com> |
||
|
|
6f93e7a851 |
fix(examples): cut both mounting holes in the bracket (#1515)
Co-authored-by: bherbruck <brennen.herbruck@gmail.com> |
||
|
|
f480898158 |
Extrude: join extensions of ribs on curved bases (#2059) (#2082)
Thanks @fkirill. |
||
|
|
2c924fd385 |
Sweep: close circular tools before cutting a torus (#2005) (#2010)
Thanks @fkirill. |
||
|
|
40abcbc8cf |
Booleans: prism cuts whose walls only touch the target are exact (#1894)
Thanks @NOWN-DEV. |
||
|
|
f57a62deb7 |
Intersection edge nodes advance along the curve at fine display qualities (#1615)
Thanks @jyviko. |
||
|
|
762b6fe934 | Extrude Cut of a whole face beside round corners: grow the arcs too (#1275) (#1401) | ||
|
|
ad30a2350e |
Navigation: choose the orbit centre: view centre, origin or point under the cursor (#1377)
Preferences ▸ Navigation ▸ Orbit around now offers View centre (the default, as before), Origin and Point under the cursor. A saved orbit_cursor preference migrates to the cursor option, and the control channel still accepts the old key. Thanks to @kuraneko1 for this. Co-authored-by: kuraneko1 <98832587+kuraneko1@users.noreply.github.com> |
||
|
|
a261aaa841 |
Render: integrated workspace, preview image jobs and opaque PBR (#1046)
Lands the Render workspace (R3), bounded preview-image jobs with cancellation and atomic PNG export (R4a), and opaque PBR looks as one change. - Render workspace: an overlay-free product preview on the installed GPU device. Returning to Design restores its camera. render.scene and render.settings.apply are added. - Image jobs: render.preflight/start/status/cancel/export run bounded CPU preview jobs. Export captures the job, overwrite choice and document, and checks the caller's file scope before writing. - Opaque PBR: looks can carry metal fraction, roughness and dielectric IOR. The product viewport and preview PNG use them; geometry and mass are unchanged. The v1 catalog export refuses PBR rather than dropping it. - Render setups and PBR looks are saved under design format 21. Labels are in en/de/ja/ko/zh/ru. Supersedes #706 and #800. Refs #620, #673, #756, #1004. Contributed by @0xlillith. Co-authored-by: lillith <35337584+0xlillith@users.noreply.github.com> |
||
|
|
1cc65cbc91 |
fix: a lip swept flush around a rounded rim joins the body it sits on (#1164)
fix: a lip swept flush around a rounded rim joins the body it sits on. |
||
|
|
fe3717f2e4 |
fix: control port needs a per-launch token; MCP tool annotations tell the whole truth (#205) (#901)
solidcraft --control PORT writes a random per-launch token to a user-only file (<data>/control/PORT.token; 0700/0600 on Unix, icacls on Windows; SOLIDCRAFT_CONTROL_TOKEN overrides) and refuses any connection whose first request lacks it. mcp --connect, the demo and packaging smoke clients send it. MCP execute/batch/open/save/export/screenshot are annotated destructive and open-world, new_design destructive. Docs: control-protocol.md, mcp.md, AGENTS.md, pending release note in releasing.md. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
69050c81d9 |
Fillet and chamfer: refuse an edge pick far from every edge (#820)
Fixes #783. |
||
|
|
293d660d6c |
fix(kernel): preserve intentional Split Face lines in contact joins (#782)
Intentional Split Face lines survive a join with partial planar contact, so the far face stays in two pieces. Follow-up to #704 / #674. |
||
|
|
302dd7e343 |
README demo for 0.8: the Raspberry Pi 4 case again, with a rounded rim, engraved text and PETG (#671)
The `pi` story of examples/demo/enclosure_ui_mcp.py keeps the 0.6 flow and adds the rim rounded in one pick (a tangent chain), "Pi 4" engraved in the floor in DejaVu Sans Bold, and a PETG material defined in the design, with its mass in Properties, before the height change. The 0.6 story stays as `pi-0.6` (it built demo/pi-case). The center rectangle now comes from the Rectangle drop-down. The finished case is in the action matrix corpus as demo/pi-case-0.8. docs/screenshots/demo-0.8.gif (9.3 MB) and demo-0.8.mp4 (9.9 MB) replace the 0.6 files: 41 s at 9x playback. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
29258767ce |
fix: refuse Boolean retries that change the part away from the tool (#616) (#644)
Joining ribs flush with a lid's window left a zero-thickness slit far from the rib (the planar fallback glued back only one of the faces its pieces shared) and displaced the tool on the other joins. Gluing now joins every shared face pair, coincident-face separation checks there is material behind a pushed face for every join, and any join or cut that needed a retry must be closed, keep volume monotonic and leave the part unchanged outside the tool's box, or it is refused with an error. Feature command replies carry the feature's warning. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
1abd989a67 |
test: land the remaining ignored regression tests from #548-#573 (#582)
Ignored regression tests for #530, #531, #541, #542, #545, #547 and #570, from #548, #549, #550, #552, #555, #573 and #572. Co-authored-by: jonaswre <jonas.wrede@beyondit.gmbh> |
||
|
|
736d9277b8 |
Action matrix: every ordinary action on every face, edge, vertex and body of the design corpus (#553)
apps/solidcraft-cli/tests/action_matrix.rs tries sketch, offset/angle/mid planes, press pull, extrude from a face, hole, draft, shell, fillet, chamfer, axes, points, planes, projection, move, copy, mirror and pattern on the final bodies of 104 designs (the old design files, the examples, the 76 reference recipes, the enclosure demos, the Pi case built through the UI, eight typical parts), through the commands and picks the desktop sends, each design in its own process, with an edit round on a sample of passes. tests/action_matrix/baseline.json is a ratchet: an action that passed there and fails now fails the test; newly passing ones are reported for cargo xtask action-matrix --bless. Every CI run checks a fixed sample; the nightly Action matrix job runs the whole matrix in four parts. 30,567 of 35,576 actions pass (85.9%); results and causes in docs/action-matrix.md, one ignored reproduction per open cause (#556-#568). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
7a8754bef7 |
test: failing regression test for #544 (ignored until fixed): Blind Ø2 hole into a long D-profile bar is refused ("exact fallback … takes planar faces only") although it stays clear of the round face (#551)
Adds an ignored regression test for #544; it runs once #544 is fixed. |
||
|
|
1fd4a2f782 |
README demo for 0.6: a Raspberry Pi 4 case (#504)
Replace the 0.2.1 enclosure recording with a 40 s take of the current desktop UI building a Raspberry Pi 4 case: a sketch dimensioned with the board's parameters, extrude, fillets and shell, an M2.5 standoff patterned on the 58 x 49 mm hole rectangle, port cut-outs, floor vents, a colour, then height 24 -> 32 mm in Parameters. The demo script gains the pi story (now the default). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
006a23a767 |
Add design containers with deduplicated blobs and JSON compatibility (#327)
* Add fast design containers with lossless deduplicated payloads * Keep display caching opt-in to avoid default save overhead |
||
|
|
296683229d |
Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)
* WIP deep rename (not for push) * WIP2 * WIP3 * WIP4 wxs fix * rustfmt * Rename the remaining identifiers in merged crash-report code Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
f525704192 |
test: failing regression test for #268: Panic from truck-topology lib.rs:186 when joining struts that end on a bore wall (#283)
* test: reproduce #268 (Panic from truck-topology lib.rs:186 when joining struts that end on a bore wall) * Sew refuses edges whose ends weld to one vertex (#268) The sewer welds vertices on a 1e-6 grid but only rejected edges shorter than 1e-9, so a sliver edge between the two welded its ends into one vertex and truck-topology panicked ("Two same vertices cannot construct an edge") inside the guard. Such an edge is now a degenerate-edge error before any truck call, and the boolean takes its usual fallback. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: bherbruck <brennen.herbruck@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
6f872c7789 | docs: restore the original enclosure demo in the updated UI | ||
|
|
1a62c4513f | docs: restore the enclosure demo with the 0.2.0 UI | ||
|
|
a6bb8fc924 | feat: stabilize face attachments and closed spline workflows | ||
|
|
3086c32a9a |
A round hole elsewhere on a body no longer breaks a loft cut beside it: a loft cut from a pocket floor (556.68 x 99 down 4 mm to 80 x 80), with a 35 mm hole 66 mm away that it never touches, failed with a kernel panic in TroughFall, while the same cut without the hole, or with the hole made afterwards, worked
The loft's top lies in the pocket floor. truck's boolean cannot take coincident faces, and the exact polygon fallback (planar_boolean) only takes bodies whose faces are all planar, so the hole's cylinder ruled out the only path that handles this cut. planar_boolean now first tries a sliced form: when an axis-aligned slab holds the tool and none of the body's curved faces, the body is split on the slab's planes (planes clear of the body's own faces), the planar middle piece takes the exact boolean, and the pieces outside are glued back on along the cut faces (the middle piece is healed first so its edges match theirs). Pieces in several parts are refused rather than glued into one shell. split_by_plane's half-space code is now ops::half_space, which this uses. Tests: loft_cut_beside_a_round_hole replays examples/regressions/loft_cut_beside_round_hole.json and checks the exact volume (slab - pocket - prismatoid - hole; fails on main). With the hole made after the loft, the body is the same (volume, area, 19 faces, 42 edges). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
5249ae84ef |
Moving a body that a boolean made no longer hangs: a boolean between a cylinder and a tilted plane (an elliptical edge) froze the app at 100 % CPU, because its retries move both bodies and the result back
Moving a body transforms its intersection-curve edges, and truck-geometry 0.5.0 scales each curve's tolerance by the operator norm of the matrix. matext4cgmath 0.1.0 computes it from eigenvalues through a quartic whose Newton refinement loops while the residual is above a tolerance and never gives up. For a translation matrix all four eigenvalues are 1, and near that quadruple root the iteration can cycle forever (about one translation in eight of the boolean retries' shifts, by a scan of sizes 0.1-2000 mm). matext4cgmath is vendored with both Newton loops stopped after 100 steps (vendor/README.md, ATTRIBUTION.md). truck master no longer computes the norm in transform_by, so the vendored copy can go once a truck release after 0.5.0 is adopted. Tests: moving_a_body_with_an_intersection_curve_edge_ends (kernel) cuts a cylinder with a tilted box and moves the result by one of the shifts that hung (hangs on main). examples/regressions/oblique_cut_of_cylinder_hang.json is the variant of the oblique cut that hung the app; it hangs on main, and since the previous commit it passes without reaching the shifted retries, so it is replayed by the engine test as a scenario only. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
f3a689f284 |
A thin part trimmed by a long one is no longer refused as an implausible result: a 437 mm bar with a 3 mm concave arc in its profile, cut by a 920 mm prism with a top tilted 21 degrees, failed with "implausible result volume 3870" (it was 3694 before the cut)
The boolean checks its result by meshing both operands and the result, then sampling membership densely where the operands' boxes overlap. The mesh step came from the larger body's size (0.46 mm here), which facets the bar's 3 mm arc so coarsely that two meshes of the same arc disagree over a few percent of the thin overlap box, and a correct cut failed the 0.4 % mismatch limit. The step now also follows the smallest side of the overlap box (2e-3 of it), never finer than 1e-5 of the size, so it only changes where the bodies meet in a region much thinner than they are. truck's first result for the cut is then accepted, and it matches a split of the bar by the tilted plane. Tests: oblique_cut_through_a_small_arc_matches_a_split replays examples/regressions/oblique_cut_of_cylinder.json and compares with solid.split_body by the same plane (fails on main). The full suite runs no slower. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
f17ff913d6 |
A panic while healing a boolean result no longer ends the boolean: a shallow, wide loft cut from a top face (556.68 x 99 down 4 mm to 80 x 80 in a 900 x 480 x 160 slab) failed with "called Option::unwrap() on a None value"
heal_keep evaluated the result's intersection curves outside any guard. truck panics where such a curve no longer evaluates, and the panic escaped boolean_whole, so the retries and fallbacks that would have succeeded never ran. heal_keep now runs under guard and returns the solid unhealed when healing panics (as its doc already promised for failures), and the boolean builds its result body under guard too, so a result that cannot be built counts as a failed attempt. Tests: shallow_loft_cut_from_the_top_face replays examples/regressions/shallow_loft_cut_from_top_face.json and checks the exact prismatoid volume (fails on main with the panic). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
abb9d7460f |
Acceptance project (#27): examples/acceptance/sensor_enclosure.json, a sensor enclosure sized from user parameters (case with USB cut-out, patterned PCB standoffs and lid bosses, snap fit; lid with a lip from offsets of the case's rim and patterned screw holes). Scenario acceptance_sensor_enclosure edits it (USB moved, suppress and back, save and reopen, STEP out and back in); pending scenarios for what fails: #40 (lid lip after a resize), #41 (snap fit after a resize), #42 (pattern of a suppressed feature), #29 (Lip on the rounded rim). Harness: a script step runs a command script, $DIR in call parameters is the scenario's folder
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT |
||
|
|
8601611d0c |
MCP demo v3 (enclosure_ui_mcp.py --story v3, default): one standoff placed from the parameters (width/2 - inset, depth/2 - inset) and patterned 2 x 2 in the Rectangular Pattern dialog with spacings width - 2*inset and depth - 2*inset, then width 80 -> 100 and wall 2 -> 3 typed into the Parameters dialog; record_v2.sh is now record_ui.sh STORY. A pattern's Direction can be a straight model edge (an edge along an origin axis points the axis's way), scenario pattern_direction_edge. Dialog rows publish their widgets as dialog:<label> handles (combo items dialog:<label>:<item>, OK), the Parameters dialog its expressions (param:<name>), title and close button
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
1d11898a2c |
MCP demo v2: examples/demo/enclosure_ui_mcp.py builds the enclosure through the UI like a person (toolbar clicks, real dialogs, sketches on the model's faces, Look At and back out, orbits between features) with the parameters and their dimensions over MCP; record_v2.sh and overlay.py record it with captions (UI click / MCP call) and a drawn pointer with click ripples. Toolbar buttons, drop-down items and panel labels publish handles (toolbar:<id>, panel:<tab>:<panel>); control method ui.handles lists them
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
025380277a |
MCP demo: examples/demo/enclosure_mcp.py builds an electronics enclosure in the running app over MCP, one execute call per step of enclosure_steps.json (rounded box, shell, USB port cut, four screw bosses, then width 80 -> 100 mm rebuilt), ending on an orbit; record.sh and captions.py record it with ffmpeg and burn in captions
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
d10312b7fd |
Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs
The old ids live only in crates/engine/src/legacy_ids.rs (the legacy migration table): find_command maps them, so old scripts, recipes and control calls keep working, and saved shortcuts, recent and pinned commands are migrated on load (designs store no command ids). Parity maps the observed catalog ids to ours through xtask/data/fusion-ids.tsv. The agent rule now reads: our own dotted id, never another product's. Cargo.toml's repository points at github.com/bherbruck/solvecraft. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
0f3e7701a7 |
M0: docs (README, CLAUDE/AGENTS, ROADMAP, control protocol, NOTICE, attribution), example, parity and oracle reports
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |