Commit Graph

77 Commits

Author SHA1 Message Date
jyviko 3099117942 Wave 288/509: UI: one continuity control for every continuity choice (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- fd34314d5 jyviko: UI: one continuity control for every continuity choice
- fab8948b3 jyviko: Clippy: assign operators and is_multiple_of in the continuity code
- 1260353f4 jyviko: Fillet Corners: the shared continuity control says what each corner builds
- bf16a76a4 jyviko: SMLib: the prebuilt with eased setbacks

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-27 21:11:56 -04:00
jyviko 7c14ae2ce2 Wave 287/509: Continuity Analysis measures G3 and G4; the dialogs offer what each construction builds
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 2fed39c85 jyviko: Continuity Analysis measures G3 and G4; the dialogs offer what each construction builds

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-27 20:14:44 -04:00
jyviko 01be42ef41 Wave 278/509: Tapped holes: the tap maker's drill for every form, and a drill of the user's within 5% (and 1 more)
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 05f1c6b9a jyviko: Tapped holes: the tap maker's drill for every form, and a drill of the user's within 5%
- 87e7fe472 jyviko: Tapped holes: a preference keeps metric's major-less-pitch drill

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-27 12:27:35 -04:00
jyviko e98cd0a0e2 Wave 277/509: Tapped holes: Rc and NPT take the tap maker's tabulated drill
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- e7994d48c jyviko: Tapped holes: Rc and NPT take the tap maker's tabulated drill

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-27 11:15:38 -04:00
jyviko cc2de29abb Wave 276/509: Tapped holes: Rc and NPT, and a modelled thread with the thread's End (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 9717fab2f jyviko: Tapped holes: Rc and NPT, and a modelled thread with the thread's End
- 72e0e0094 jyviko: Ladder 06/017: the golden entry from a run of the case
- 376a91ad7 jyviko: Hole presets: a modelled tapped thread and its End, and every catalogued size
- b6c3b32a9 jyviko: Tapped holes: an Rc or NPT hole takes the stocked drill under its standard minor

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-27 10:56:34 -04:00
jyviko 4531ab6182 Wave 275/509: Thread: the pipe forms in the dialog, ISO 7-1's Rp, a chamfered tip on a taper thread (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 361b35afe jyviko: Thread: a shoulder thinner than the overrun's reach is still a shoulder
- 5fe141c0f jyviko: Thread: the start never fades; ease_in is gone
- 386598282 jyviko: Thread dialog: the Ends section is Start (None, Chamfer) and End (Square, Fade)
- 80e47130b jyviko: Thread: the pipe forms in the dialog, ISO 7-1's Rp, a chamfered tip on a taper thread

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-27 07:57:20 -04:00
jyviko d1b64fb2ff Wave 273/509: Continuity in words: surface dialogs and Continuity Analysis show no G codes (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 28e3b8a19 jyviko: Continuity in words: surface dialogs and Continuity Analysis show no G codes
- 81ecc872f jyviko: Guide: the Fillet dialog's Type and Corners in their new words
- d1a8f0417 jyviko: Thread: a boss thread keeps clear of the plate below
- a30a85698 jyviko: Thread: the chamfered tip reaches ISO 724's external minor diameter

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-27 01:58:51 -04:00
jyviko cf8ad08ec3 Wave 272/509: Fillet dialog: plain words for continuity, Corners with Setback out of Advanced (and 2 more)
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 4f6f254d0 jyviko: smlib: a setback left open is a profiler span like every other SMLib call
- 676919d4d jyviko: tess: a face no method plans is filled leniently in (u, v), and named in the stats
- 1acbe2806 jyviko: Fillet dialog: plain words for continuity, Corners with Setback out of Advanced

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-27 11:12:59 -04:00
jyviko 335278e3c7 Wave 266/509: Profiler: commands, feature evaluation, io; diagnostics.profile; CLI --profile (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 10ea00e74 jyviko: Profiler: every SMLib C API call is a span, timed by the C API itself
- 319c0bc9f jyviko: Profiler: kernel operations and STEP/IGES import stages are spans
- 9cd655259 jyviko: Profiler: commands, feature evaluation, io; diagnostics.profile; CLI --profile
- fafd977b0 jyviko: Profiler: the Profile operations preference switches recording at run time

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-27 08:22:36 -04:00
jyviko e7aadf8f40 Wave 262/509: CI: develop runs like main; SMLib is fetched after the Rust cache is restored (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- d13300b0a jyviko: cargo fmt: the format-40 change and the rebase's export list
- 873124c49 jyviko: CI: develop runs like main; SMLib is fetched after the Rust cache is restored
- 6517d1ee6 jyviko: Arabic and Hebrew catalogs: #4414's thread direction labels out, as in every other catalog
- fddb57c0d jyviko: Thread dialog: its labels in the catalogs; Arabic and Hebrew pending messages compare in display order

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-27 03:05:23 -04:00
github-actions[bot] 0c16cfefbb Regenerate generated files and fold pending files [skip ci] 2026-10-27 04:40:23 +00:00
github-actions[bot] b2189e3f4d Regenerate generated files and fold pending files [skip ci] 2026-10-27 04:31:59 +00:00
Victor Santos Oliveira 6e12f5954f Navigation: snap free orbit direction and roll with Shift (#6943) (#6949)
* claim: #6943 free orbit Shift snapping

* fix(ui): snap free orbit direction and roll with Shift

* test(ui): align free orbit coverage and complete snap help translations
2026-10-27 04:11:16 +00:00
Nathalie Schönwetter 6848c78424 Sketch Transform: one box with handles to scale, move and turn what is picked (#6004)
* Sketch Transform: scale, turn and move sketch entities in one command and one undo

sketch.transform scales about a centre, turns about it, then moves; the window and its
handles for existing sketch geometry build on it.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Sketch Transform window: one box with handles to scale, move and turn what is picked

Select curves and points in a sketch and press G (or Transform in the Modify panel or the
context menu): the picks get a box with a handle at each corner to scale (the opposite corner
stays), the box to move and a knob above it to turn (Shift snaps to 15 degrees). Position,
Width, Height, Scale and Angle in the window are the same values, to type exactly; OK applies
it as one step.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Move the new message to a pending locale file

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch Transform: follow the sketch field of Sel::SketchCurve

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Nathalie Schönwetter <nathalie@cfw-ag.ch>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-27 03:34:07 +00:00
DuBearte b47f82d406 Reopen the designs open at the last quit (#5542) (#6006)
* claim: #5542

* Reopen the designs that were open at the last quit (#5542)

A launch with no file to open reopens the saved designs that were open
when SolidCraft was last closed, in tab order. Designs never saved and
files that are gone are skipped. Preferences > General > Reopen designs
turns it off; a launch driven over --control or with --sample starts fresh.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Move the new messages to a pending locale file

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-27 03:34:04 +00:00
github-actions[bot] 78d80e0144 Regenerate generated files and fold pending files [skip ci] 2026-10-27 03:52:42 +00:00
Lars Jansen 2d629069c6 Dialogs: OK and Cancel at the top (#6708) (#6713)
* claim: #6708

* feat(dialogs): OK and Cancel at the top (#6708)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:42:23 +00:00
github-actions[bot] 237341423c Regenerate generated files and fold pending files [skip ci] 2026-10-27 02:49:11 +00:00
HotThrower71 af1d15b5ea Canvas to Sketch: trace a canvas image into a sketch on it (#3931) (#4263)
* Canvas to Sketch: trace a canvas image into a sketch on it (#3931)

New command canvas.to_sketch, offered as Canvas to Sketch in the canvas
context menu. It traces the canvas image (automatic Otsu threshold, light
drawings on dark backgrounds inverted) with interpolated marching squares
and Douglas-Peucker, and adds lines and cubic Bezier splines through Insert
SVG's add_geometry to a new sketch on the canvas plane, with the canvas'
width, centre, rotation and flip. Holes stay holes; one undo step.

The image's declared width x height is checked before decoding (at most
40 megapixels) and the decoder runs under image::Limits, since canvases
are capped by file size, not pixel count.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Move the new message to a pending locale file

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-27 01:39:18 +00:00
github-actions[bot] 84a3a0c478 Regenerate generated files and fold pending files [skip ci] 2026-10-27 01:57:22 +00:00
github-actions[bot] 1551c0acef Regenerate generated files and fold pending files [skip ci] 2026-10-27 01:51:03 +00:00
Lars Jansen f1cc49bcdb History: list a sketch under the feature built from it (#6489) (#6494)
* claim: #6489

* feat(history): list a sketch under the feature built from it (#6489)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 00:59:57 +00:00
phanoob 5622963b91 Insert SVG / DXF: place, size and turn the drawing before it is added (#2605, #3443) (#3542)
* claim: #2605

* Insert SVG / DXF: place and scale the drawing before it is added (#2605, #3443)

After the file is picked, an Insert SVG (or DXF) window sets the
drawing's X, Y offset and scale, with a live preview; OK adds it in one
step and Cancel adds nothing. The insert commands already took `at`
and `scale`; the window is what was missing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Insert scenario: the picked drawing goes through the placement window (#2605)

`sketch_toolbar_imports_use_file_picker` expected the SVG added as soon as
it was picked; it now checks the placement window first and adds it with
OK.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Insert SVG / DXF: a size in millimetres, an angle, and placement by the drawing's centre

sketch.insert_svg and sketch.insert_dxf take width or height (mm, aspect kept, winning over
scale), angle (degrees) and align (origin or center). The new sketch.drawing_bounds reads a
file's own size without inserting it.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Insert SVG / DXF window: Width, Height and Angle, placed by the drawing's middle

Width and Height in millimetres follow the scale (aspect kept); Angle turns the drawing
about its middle, where X and Y now put it. Uses sketch.drawing_bounds for its own size.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Insert SVG / DXF: handles in the viewport to scale, move and turn the drawing

The preview gets its box with a handle at each corner (scales about the opposite corner,
aspect kept), the box itself (moves) and a knob above it (turns, Shift snaps to 15 degrees).
They edit the same X, Y, Scale and Angle the window shows.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Insert handles: the move that comes with the release counts

A quick drag could stop short of the pointer's last position because the final move arrives
in the same frame as the release.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Insert SVG / DXF: the Drawing Size command's label in the catalogs

`sketch.drawing_bounds` came without a catalog entry, which the i18n
test requires (and the complete ja and zh catalogs with it).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Move the new messages to a pending locale file

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Nathalie Schönwetter <nathalie@cfw-ag.ch>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-27 00:50:35 +00:00
github-actions[bot] 3bea744823 Regenerate generated files and fold pending files [skip ci] 2026-10-27 01:25:12 +00:00
N3MI-DG e8eb7ee11a Components: copy and paste bodies and components between designs and components (#3390) (#3390)
Squashed for the rebase onto main.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 00:33:57 +00:00
github-actions[bot] 924724dc89 Regenerate generated files and fold pending files [skip ci] 2026-10-27 00:34:00 +00:00
HiroKenEz 56bcd872cb Cone primitive: solid.cone with base and top radius (#5641) (#6250)
* claim: #5641

* Cone primitive: solid.cone with base and top radius (#5641)

A cone or truncated cone placed like the cylinder: base centre, axis,
base radius (or diameter), top radius (0, the default, is a full cone)
and height, with the new body / join / cut / intersect choice. It is
built from what the kernel already exposes, a revolve of its half
section about +Z through the origin, moved into place. Toolbar entry
after Torus, a Cone dialog that also places it on a picked face, Edit
Feature, a timeline icon, pending UI strings and attribution, and one
pending design-format change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 23:57:43 +00:00
github-actions[bot] 96e43bb4ef Regenerate generated files and fold pending files [skip ci] 2026-10-26 23:04:43 +00:00
github-actions[bot] 955f5aea43 Regenerate generated files and fold pending files [skip ci] 2026-10-26 22:56:34 +00:00
bherbruck 739e442824 Links: ask before following a design's network paths (#7372)
A path a design names (a linked design, a sketch text's font file) now
goes through one rule before any file call: a network location is
reached only once its server is allowed, a device path never. Update
Links and Open Linked Design ask first (Allow once / Always allow this
server / Cancel); Preferences > Design lists the allowed servers and
can allow every network location. component.links reports such a
link's found as unknown with a reason, without looking for it.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 18:52:43 -04:00
MAKAO 30f951ecf9 Navigation bridge: a device's own app moves the view (#6094)
A homemade 3D input device's driver app (MAKMOUSE) listens on a loopback
port; with Preferences > Navigation > "Navigate with a device app on this
computer" on (off by default), the desktop app connects, says hello and
reads JSON lines: axis motion (orbit, pan or zoom by mode), zoom steps and
standard views. The motion goes through navigation::device like a 3D
mouse's, only in the focused window; a HID device the app names is left
to it. Documented in docs/3d-mouse.md.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 22:14:52 +00:00
github-actions[bot] 02458892d9 Regenerate generated files and fold pending files [skip ci] 2026-10-26 22:30:02 +00:00
amolinari-autotex 1d02a5f2d4 Personal Hole parameter presets (#4480)
* feat: add personal Hole parameter presets

* feat(hole): prompt for preset names and recall changed selections

Ask for a name only on Save new or Rename in the kit confirmation. Keep Enter and Escape inside the prompt, preserve cancelled drafts, recall only changed selections, and retain independent recessed-hole bottom choices.

* feat(hole): preserve thread direction and partial depth in presets

Carry Left/Partial, explicit source units and Custom draft guards through personal preset capture and recall. Preserve legacy Right/Full/flat defaults and reject unknown options before changing the form. This production bridge depends on the handedness and graphical-depth changes inherited below it.

* docs(hole): describe supported preset thread options

* feat(ui): save modified hole presets in place

* fix(presets): retain reference placement and current locale contracts

* test(ui): borrow restored preset library during serialization

* test(presets): preserve modal focus with viewport focus restoration

* Use UI kit controls for hole preset selection
2026-10-26 22:00:56 +00:00
github-actions[bot] 610f2e479c Regenerate generated files and fold pending files [skip ci] 2026-10-26 21:16:46 +00:00
Colin Faulkingham 4c7087ec16 Disable Perspective while editing a sketch (#2144) (#4291)
* claim: #2144

* Disable perspective toggle while editing a sketch (#2144)
2026-10-26 20:48:21 +00:00
github-actions[bot] b28decfaf6 Regenerate generated files and fold pending files [skip ci] 2026-10-26 20:30:44 +00:00
Jesper We 436ee95095 Preference: return to the previous view when a sketch ends (#7038) (#7043)
* claim: #7038

* Preference: where the view goes when a sketch ends (#7038)
2026-10-26 19:31:55 +00:00
github-actions[bot] 1ee2532678 Regenerate generated files and fold pending files [skip ci] 2026-10-26 20:00:04 +00:00
Nathan Dane fbcd4852c1 Navigation bar: the view commands (#6585) (#6586)
* claim: #6585

* Navigation bar: the view commands (#6585)
2026-10-26 17:46:15 +00:00
HiroKenEz 97cce94a1c Agent chat: tool calls read as summaries, raw JSON behind Details (#1457) (#6245)
* claim: #1457

* Agent chat: tool calls read as summaries, raw JSON behind Details (#1457)

Each tool-call card now says what the call did, built from the command's
translated label, its main parameters (lengths in the design's units) and the
bodies the result names: "Extrude Sketch1 by 10 mm", "Box 40 x 30 x 20 mm,
then Fillet 4 edges (r 4 mm)", "Measured Block: ...", "Saved block.solidcraft".
Calls it can't put in words keep the agent's title. The raw arguments (now
kept from the in-app client and ACP's rawInput) and the result sit under a
folded "Details".

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Agent chat cards: show file names, never paths; temp files not named

ui.screenshot reads "Screenshot"; save/export/open and other tools' titles
show only the file name. The full text stays under Details and in the tooltip.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-26 17:22:17 +00:00
github-actions[bot] a2ccbd0684 Regenerate generated files and fold pending files [skip ci] 2026-10-26 19:21:19 +00:00
Daniel 2e566e2c58 Placement handles for Rest, Boss and Snap Fit (#4384) (#5362)
* claim: #4384

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Placement handles: shared module, with Rest as the first tool

The Rest handles spike becomes a shared module, place_gizmo, so other features placed on a face can
use the same marker and knob. The mechanics (crosshair with its three states, the grab offset, the
footprint while dragging, the turn knob) live in place_gizmo.rs. The handles own the pointer through
canvas::owns_pointer, as the move triad does, so navigation and Select Other's press-and-hold leave
them alone. Each tool is one file under place_gizmo/ that gives a Spec: which dialogs it serves,
which commands' Position input also takes sketch points, where the place is, how the pointer
re-places it, its footprint and its turn, if any. The module lists the tools one per line, so tools
added on separate branches each add one `mod` line and one list line. Rest is the first.

The handles are always on; the preference the Rest spike had is gone. The POINTS accept flag on a
Position input is granted from the tools' Specs instead of a Rest-only arm in the plastic dialog's
start. Handles are published as `rest:position` and `rest:rotate` as before.

Seen straight down, the dialog's height arrow collapses onto the place and its value box sits just
right of it, where it took the press meant for a knob pointing that way. The knob now slides out
along its ray until it is clear of the box.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Placement handles: Boss

The marker moves a boss across the model, also from Edit Feature, and its Position input takes
sketch points while the handles are on, so a screw boss can be dragged onto the centre of a
circle drawn for it. A boss is round, so it gets no knob; the footprint while dragging is its
outer circle. Published as `boss:position`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Placement handles: Snap Fit

The marker moves a snap fit across the model and its Position input takes sketch points while
the handles are on, so the arm can be put where a sketch says (#3423). The knob points the
catch: it turns between the four directions the Catch Direction combo offers for the face, so
the knob and the combo always agree; the command keeps only those four, so there is no free
turn. The footprint while dragging is the arm's foot, its thickness behind the place and its
width across. Published as `snap_fit:position` and `snap_fit:rotate`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Placement handles: the look in one file

Everything that draws the handles (the crosshair and its three eased states, the knob's ball, the
cased lines, the angle label, the colours) moves from place_gizmo.rs into place_gizmo/look.rs, so a
restyle touches one file and the mechanics (hit radius, drags, knob geometry) stay where they are.
No change in behaviour.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Placement handles: behind a Design preference, off by default

The handles sit behind Preferences > Design > Placement > Placement handles (`placement_handles`,
also through `ui.prefs`), off by default as the hole placement work in #2912 is: a Rest, Boss or
Snap Fit is then placed by its click alone, its Position input takes faces only, and no handle is
drawn or published. The tests switch the preference on; one checks the default.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Placement handles: the tests hide the origin through set_origin_shown, as main does since #1849

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Placement handles: the move marker as designed in the prototype, drawn with theme tokens

The marker is a dot with four arms to the screen cardinals: short and dotted at rest, longer with open arrowheads when pointed at, solid while dragging, each state growing out of the previous one (360 ms). Sizes are the prototype's. Its core is the icon highlight and its casing the marker halo, the tokens main's hole handle uses, so the literal allowance goes. The tip shows while pointing, not during a drag.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Placement handles: the dialog's drag arrow stands above the move marker

With the handles on, the Height arrow started at the marker's centre and ran through its upper arm, head on arm tip. The arrow now keeps the marker's full reach and a gap free at the base, its shortest length grows by as much, and the base dot is left to the marker. Other dialogs are unchanged (clearance zero).

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Placement handles: a turn ring on the face replaces the knob

The ring lies on the face about the move marker's centre, drawn in perspective, a fixed 65 px on screen like the move triad's arrows (it is a control of something on the screen, not a measure of the model). At rest it is a short dotted arc with an open chevron grip just outside; pointed at, the dotted circle opens from the grip both ways round and the grip slides in and fills; while turning, a solid arc around the grip. Dragging the grip turns the feature as the knob did, through the same handle name, so the harness tests stand.

The floating value box yields: with a handle's centre under it, it moves to the other side of the arrow's tip or above it, since seen straight down the box sat exactly where the grip is. A handle the arrow's stem crosses keeps the pointer.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Placement handles: a compass while turning, and the turn pulled onto the face's compass points

Four ticks just outside the ring at the face's in-face world directions (the ones the Snap Fit combo names, +X, −Y, …) appear while turning and stay put, so you can see how far you have gone. A Rest's turn is pulled onto one of them within 8°, otherwise it steps by 5° as before; Alt or Ctrl frees it. The readout beside the grip names the point it sits on ("90° · +X") and keeps clear of the ring.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Placement handles: the footprint in the preview's blue, the idle handle steps back

The footprint drawn while the marker drags is a filled shape in the preview's own blue with a thin darker edge, not a white outline, so white stays reserved for what can be grabbed. While one handle is dragged the other fades to a quarter and comes back when the drag ends.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Placement handles: the ring in the preference text, the docs and the tests' wording

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Placement handles: the look as tuned in the app

Marker: drawn to the redrawn design (dot r 3.9 pt, two dashes per arm, a filled head 8.7 × 7.1 pt whose base is where the outer dash began); pointed at, the outer dash becomes the head (its far end narrows to a point, its near end widens); dragging runs the inner dash on into the head as a shaft. Every casing is 0.4 pt outside the edge, for lines, heads and the dot alike.

Ring: the grip and the compass lie in the ring's plane like the circle, so the grip is never skewed against it; the grip is a thick chevron with a hole that flattens into the base as the grip slides onto the ring, and fills; the dotted circle stays while turning, with the solid arc laid over it; opening eases in and takes 0.3 s, leaving is a 0.15 s fade over the resting ring, not the sweep backwards; a drag keeps the angular gap of the press, so the grip does not jump onto the pointer; the compass ticks and the readout's point name are in their axis colours, and the grip takes the axis colour (eased) while aligned with one, with that point's tick left out; free turning keeps a hair of pull (0.5°) so an axis can still be hit; the readout wraps to a half turn.

Value box: with a ring it keeps out of the circle the ring, grip, compass and readout sweep, one place per view, nothing moves when a turn starts; also when the value does not evaluate and there is no arrow.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Placement handles: the readout shows a half turn as 180°, not −180°

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Placement handles: the motions in one place

The animations the handles grew (a factor eased in and out each way on its own time and easing, a handle stepping back while the other works, a colour that comes and goes from the last one it was on, the gap a press keeps for its drag, an offset that slides instead of jumping) move out of place_gizmo into motion.rs, so the next manipulator reuses them. The look's timings become Transitions in look.rs. No change in behaviour: the contact sheet before and after is identical, the harness tests stand.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Placement handles: the axis colours as main names them since #4430

The compass and the aligned grip take the one set of X, Y and Z colours (axis_x, axis_y, axis_z); the Move gizmo's own array is gone.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

---------

Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
2026-10-26 15:35:10 +00:00
github-actions[bot] 2016ba71f4 Regenerate generated files and fold pending files [skip ci] 2026-10-26 18:07:03 +00:00
Colin Faulkingham b55f30959d AI Preferences: reflect agent authentication results (#2578) (#4253)
* claim: #2578

* fix: reflect agent authentication in login badges (#2578)
2026-10-26 11:57:00 +00:00
github-actions[bot] a078d4e7e9 Regenerate generated files and fold pending files [skip ci] 2026-10-26 17:30:10 +00:00
Dahak Builds 6f5f64f2d9 Viewport: perspective while orbiting, orthographic on face-on views (#2682) (#6700)
* claim: #2682

* WIP: perspective-while-orbiting with auto-ortho on face views

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-26 11:14:14 +00:00
github-actions[bot] b20f522f5d Regenerate generated files and fold pending files [skip ci] 2026-10-26 16:34:07 +00:00
Mateusz Sych d895fef354 Control channel: a pushed design.changed event for clients that subscribe (#6985) (#6986)
* claim: #6646

* Control channel: document.revision, a design revision and a document id (#6646)

A program that follows the open design asks document.revision and exports
only when the answer moves: document_id names the open design (kept through
edits, saves and renames, another for each design started or opened, never
shared between two tabs or two runs) and revision moves whenever the design,
what is hidden or an uncaptured component position changes. It stays put on
reads, selections and view changes, unlike the session's view revision.

The revision is read lazily: the session remembers the design it last
reported (held weakly, so Arc::make_mut can never change it in place and its
address can't be reused) and takes a new number from one counter for the
whole run when the design is another one. The control method answers at once,
also while a slow command computes; engine.execute reaches the same command
for scripts and MCP.

* document.revision: hash the run's id prefix with the process's random keys

A clock set before 1970 gave every run the prefix 0, so a restarted app could
answer a new design with the id and revision of the old one. The docs no
longer promise an answer at once: a screenshot waiting for an opened design to
be meshed still holds the requests behind it.

* document.revision: its label in the complete catalogs (ja, zh)

* claim: #6985

* Control channel: control.subscribe and design.changed events (#6985)

A connection that sends control.subscribe gets the active design's id and
revision in the reply (as document.revision answers), then a
{"event":"design.changed","params":{document_id, revision}} line whenever
either changes, so a live link need not poll.

The window publishes the design at the end of each frame's logic and
drawing while a connection is subscribed (one atomic load otherwise). Each
subscribed connection waits on that from a thread of its own and writes
the latest after a 100 ms gap, so a burst of changes is one line. Replies
and events share one lock per connection, each written whole (#6390).

* control.subscribe: the reply before any event, a second one refused

The events thread started before the subscribe reply was written, so a
change right after the window's answer could reach the client before the
reply that named the older revision. The subscription now starts holding
the connection's line lock and writes the reply under it.

A second control.subscribe on a subscribed connection is refused on the
connection itself: its answer could arrive behind a newer event. When no
thread or socket is left for the events, the reply says it did not
subscribe instead of ok.

* control.subscribe: a second one does not lose a finished late reply

The already-subscribed answer came before the busy check, so a request that timed out and had finished since lost its reply: control.pending then said the app ended it without one. It now comes after the busy check and drops a finished late reply as every other request does.

* control_server: declare the subscribe guard at the top of the loop

Clear of the lines #6643 changes (its token check moves to where the declaration was).

* control_server: the subscription's items beside serve

Away from the lines next to send, where #6643 adds token_of.

* control test: New on a blank design reuses its tab, so redo the box first

---------

Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
2026-10-26 11:10:03 +00:00
github-actions[bot] 7014b62388 Regenerate generated files and fold pending files [skip ci] 2026-10-26 14:22:28 +00:00
Colin Faulkingham b1bbca97ef Translate the remaining history tooltip text (#4370) (#6905)
* claim: #4370

* fix(ui): translate history tooltips and feature status
2026-10-26 10:41:50 +00:00