* Ribbon: Finish Sketch follows the last sketch panel
The Sketch tab's exit group sat alone at the far right of the ribbon,
about 600 px from the sketch tools on a 1600 px window. It now comes right
after the last panel, as before the redesign. Its room is still kept at
every width, and when panels go into the » menu it moves to the right end
after it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* ui_layout test: Finish follows the last sketch panel, right end only with the » menu
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* ui: spacing, radius and type tokens, per-tab accents, agent and on-accent tokens
* ui: per-tab accent behaviour and a larger application bar with a Start page button
* icons: silhouette master and flat assistant and agent link icons (open for review)
* icons: apply review notes (sparkle assistant, refined plug, silhouette halo)
* icons: wire the silhouette master to inspect.silhouette; record the accepted icons
* ui: application bar to the design: separators, Save, house, assistant icon, readable hovers
* ui: ribbon structure: Model to View tabs, contextual Sketch and Sheet Metal, migrated pins
* ui: ribbon painting to the compact design
* ui: smaller icon button highlight and assistant mark on the bubble corner
* ui: short ribbon labels that wrap at spaces
* ui: ribbon buttons fit their labels and Finish Sketch shows its full name
* ui: constraint gallery, workspace menu, section list headings and richer tooltips
* ui: lighter selected tab label, ribbon surface and dimmer bar separators match the dark design
* ui: document tabs as rounded chips with a dimmer inactive label
* ui: document tabs fit their names and show close only when active or hovered
* icons: close and plus masters for the document tabs (open for review)
* ui: centre the new-tab plus and overflow button on the bar
* ui: a quiet rule under the ribbon tabs on non-contextual tabs
* ui: the application bar mark separates its faces with the bar colour, not white
* ui: open ribbon section label uses the selected tint and a chevron
* ui: dim the tab close and plus icons until hovered
* ui: every ribbon dropdown uses the chevron, the workspace card included
* ui: the active document tab uses the design's surface colour
* ui: the bug button's right padding mirrors its icon side
* ui: square constraint cells and a rule before the grid
* ui: constraint cells back to their earlier size, keeping the rule
* ui: smaller constraint cells and icons, centred in the section
* ui: constraint cells fit the height of the large buttons' icon and label
* ui: sketch Create titles share the other labels' line
* ui: format the application bar and ribbon changes
* ui: active tab surface token and the colour and hover tests that follow the redesign
* tests: the merged parameter and narrow toolbar tests follow the compact ribbon
* i18n: the Malay Gap label has an English source and its Japanese and Chinese translations
* apply_off_thread tests: the evaluation lingers in tests, so still computing never depends on machine speed
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
A line and a circle or arc can now be dimensioned to the circle's edge
(ConstraintKind::LineCircleDistance, saved as line_circle_distance): the gap
while the line misses the circle (0 is tangency), or how far the edge reaches
past the line when it cuts through (stored as `inside`).
Rebased onto main as one commit (the branch's own changes; its merges of main
dropped). Conflicts resolved: the test mod lines in cmd/sketch.rs (both kept,
sorted), and README.md, whose feature list main moved to docs/capabilities.md;
the line-to-circle dimension is listed there now.
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
Co-authored-by: jyviko <jyviko@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #2535
* claim: #2535
* Sketch: preview all slot sides and caps while choosing width
Fix missing temporary slot geometry for all five tools and paint every preview curve with a shared sampling budget. Preserve the arc slot construction guide. Add geometry, painting, invalid-input and interactive typed-width regression coverage.
* Sketch: honor typed slot widths below the pointer minimum
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Bill of materials: part properties on components and assembly.bom
A component definition now carries part properties (part number,
description, revision, other tools' keys) and free text properties,
saved with the component and shared by its occurrences.
component.metadata and component.metadata.set read and change them in
one undo step; Paste New copies them; parts.insert numbers standard
parts from their standard and size, and parts.resize renumbers them.
assembly.bom counts the placed components (flat: parts at any depth
through their subassemblies; top: direct children), grouped by part
number or by definition, sorted by part number, and writes CSV (fixed,
quoted columns) or JSON. The app gets a Bill of Materials window on the
INSPECT panel that lists, edits and exports the rows.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Bill of materials: name a merged row's equal definitions once
Two standard parts with the same size are separate definitions with the
same name; their row now reads "SHCS M6x20" instead of repeating it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Window widths test: close the Bill of Materials window between commands
The test closes the floating windows a command opens before starting
the next one; the Bill of Materials window was left open and measured
against the next dialogs' limits.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Bill of materials: sub-parts in their part's row, and part properties without re-evaluating
assembly.bom takes group_children: true. A part with a part number keeps
what is placed inside it (a bolt's washer and nut) in its own row, listed
under it as children (items 1.1, 1.2, with each and count) instead of rows
of their own; bolts with different contents stay different rows, and
total_occurrences is the same either way. The window has a switch for it
and shows the children under their part; the CSV lists them after their row.
Changing part properties re-evaluated the model, re-seated every joint and
rebuilt the placed model: 361 ms per change with 30 jointed bolts. A change
that only touches components' metadata and properties now takes the same
path as a render-only change (proved on the whole Document), also for its
undo and redo: 0.6 ms.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Bill of materials: look the structure up once, not per subassembly
Deciding whether a subassembly is a part (it has bodies of its own) scanned
every body of the model for each subassembly, and each body looked up its
feature by a linear search of the timeline: subassemblies × bodies × features.
assembly.bom now indexes the placements, the body owners
(Document::body_owners: one pass over the bodies with the timeline in a map,
the same rule as model_body_component) and the numbered components once per
call. 600 bodies and features with 60 subassemblies: 8.1 ms → 1.3 ms; the
old cost grows with the cube of the design's size.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #2424
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27
* Sketch Offset: constrain to the ends of an offset spline (#2424)
An associated offset spline hid all of its generated fit nodes, its two
end points included, so nothing snapped to them, and a curve drawn from
one shared the node and was refused ("invalid offset output point roles").
- An open offset's end points are shown and snapped to again; its
interior fit nodes stay private.
- After every sketch edit, a curve that took an offset node gets its own
point there, coincident with the node: the offset keeps sole ownership
and the curve follows the offset when its source moves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27
* Scenario: lines snap to and close onto an offset spline's ends (#2424)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The toolbar gives up room in small steps (labels shorten, then icons only, then panels hand buttons to their drop-down one at a time, then trailing panels go to the » menu) instead of collapsing whole panels, so medium-width windows no longer lose icons or leave a blank gap.
Preferences > Graphics grew a row (Grid follows the view, #2035), so the Colour vision
control now sits below the fold of the fixed-size page; the scenario scrolls to it.
The page itself already scrolls for real users.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: the first dimension scales a sketch drawn by eye (#1365)
Lines drawn by eye have no size of their own until a dimension gives them one, but the first
dimension kept every other drawn length and distorted the sketch to fit (a free construction
line through the origin turned instead of the shape moving). The dimension tool now scales
the whole sketch about its origin to the first length dimension, as long as nothing in the
sketch fixes a size yet: no other driving length dimension, nothing fixed, projected or
patterned. Every geometric constraint and angle holds on the scaled sketch. Later
dimensions size what they measure as before; sketch.dimension does this only with
scale_sketch: true, so scripts are unchanged.
Fixes#1365
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Scenario s01: dimension the box's height too, now that the first dimension scales the sketch
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
New frame::add_outlined adds a button that draws its own outline with the theme's outline width set to the same width in every state, so its padding no longer drops a pixel on hover. Used by the dialogs' Select chip, Sketch Text's Path chip and the bug report's Open GitHub draft button. New dialog_chip_hover test. Fixes the second point of #1335.
Preferences ▸ Navigation ▸ Orbit around now offers View centre (the default, as before), Origin and Point under the cursor. A saved orbit_cursor preference migrates to the cursor option, and the control channel still accepts the old key.
Thanks to @kuraneko1 for this.
Co-authored-by: kuraneko1 <98832587+kuraneko1@users.noreply.github.com>
A new face-based Extrude Join (and outward Press Pull) joins the picked face's body by default and stores that scope, so an edge-touching neighbour is no longer tried first or absorbed. Explicit targets and participants still win. Related to #226.
Fixes#1187. New parameters.move {name, before|after} reorders user parameters (the design's own params order, so it is saved with no format change, and undoable); the Parameters dialog's user rows get up/down buttons. Label in every catalog. I merged main in. Checked on main + this branch: cargo check --workspace, the engine parameters tests, the UI parameter_order test, and docs/features.md regenerates unchanged.
One docked Save as mesh dialog replaces Export STL / 3MF / 3MF with face tags, with an optional Send to slicer that lists the slicers installed on this machine. Engine: file.save_mesh and file.slicers; the Convert Mesh dialog goes (mesh.convert and the MeshConvert feature stay, so existing designs open). Strings in all catalogs; screenshots in the PR. Checked on main + this branch: cargo check --workspace, the engine slicer/mesh/file tests, the UI catalog and menu tests and scenario s14 (the one local colour-token failure is epaint's TexturesDelta panic, which main shows on this machine too).
* Smart Extrude: direction from the picked side, Cut into a body stays a Cut (#1257)
- A sketch profile (or a thin extrude's curve) extrudes toward the side it was
picked from: from the bottom view it goes down. Body faces still go outward.
- The automatic operation is latched per side of the profile: a drag that starts
into a body is a Cut and stays one past the far side; a Join does not become a
Cut when it reaches another body. Passing through zero decides afresh for the
new side.
- An explicit operation, Direction or Reverse ends the automatic choices.
- auto_operation also looks just past the profile, so a long cut through a body
reads as a Cut from the start (the engine's operation: "auto" too).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Scenario s07: the XZ profile seen from behind now extrudes toward the camera
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A design carries metadata (format 21): project, part number, revision, author, organization, description and license, plus other tools' data under reverse-DNS keys, kept as written. Edited in the Design Properties window (Document Settings), set by document.metadata.set, reported by inspect_design, and written into STEP, IGES and 3MF where the format has a place for them. Translated, with tests.
Colour vision modes (Protan, Deutan, Tritan) in Preferences > Graphics, with palettes, shader and icon colours adapted per mode, translations and tests.
The dialog_docked scenario check and the ui_layout width test looked up
the dialog window by the id "sc_dialog", but dialogs are now registered
under ("sc_dialog", <title>). Every lookup failed with "no command
dialog", so the test had to stay ignored and could no longer catch an
oversized dialog.
Read the rect the dialog publishes each frame instead (viewport
dialog_rect in the check, "dialog:outer" in the test), and re-enable
every_dialog_opens_docked_within_its_width_limits. The exploded view
dialog it was ignored for now opens 365 px wide, inside its limits.
Claude-Session: https://claude.ai/code/session_01VbBYY5zfMXgq939AF9Vren
Co-authored-by: PhilippBischoff0 <PhilippBischoff0@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Fixes#971. At the node limit the offset certificate splits the fitted curve where it meets the exact offset midpoint, so curves with different parameter speeds certify within the same 0.002 mm tolerance. Associated offset fit nodes are hidden from display, picking, box selection and snapping until Break Association.
Thanks @Karl-VonRichter.
Sketch Mirror, rectangular and circular Pattern, and Offset now show a green live preview that follows the selection and settings; OK commits, Cancel leaves the sketch unchanged. The shared dialogs show the current selection step and source counts, sources can be toggled with Ctrl/Cmd-click, cleared and reselected.
Offsets keep editable driving distance dimensions (One Side, Two Sides, Symmetric) that update the derived curves without moving the source, with undo/redo and save/reopen. Format 19: older files keep their fixed offsets.
New dialog labels in en, zh, ja, de and ko.
Fixes#696. Fixes#517.
* Rounded Rectangle sketch tool (#891)
A new SKETCH > CREATE command, sketch.rectangle.rounded, in the Rectangle
family: two opposite corners and a corner radius make a 2-point rectangle
whose four corners are filleted alike, as one undo step. The radius is one
parameter (one radius dimension, the other arcs equal to it), so changing it
changes all four corners. While drawing, Width, Height and Radius boxes take
typed values; typed width and height dimension the overall size between
opposite sides. Without a typed radius the corners get a fifth of the shorter
side.
Fixes#891
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rounded Rectangle in the Simplified Chinese catalog
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A Sketch Palette toggle (sketch.options show_construction) that hides construction geometry from drawing and picking; saved with the sketch's view options under format 17.
Co-authored-by: William Dunn <william.dunn@quasarke.com>