Commit Graph

54 Commits

Author SHA1 Message Date
raykholo e1bf784014 Deleting an inserted file removes its components, placements and joints (#4100) (#4113)
* claim: #4100

* Deleting an inserted file removes its components, placements and joints (#4100)

A STEP or mesh file inserted into a design makes a component tree. Deleting
its feature left that tree behind: the components, their occurrences, the
rigid joints that hold them and the bodies' component assignments. A later
body that took an imported body's name was then placed in the stale component.

Document::remove_component_tree removes a component subtree and everything
that refers to it: the features made inside it, its occurrences, the joints
on them with their motion links, joint origins, contact set members, motion
study keys and exploded moves, body component and offset entries, standard
part and link records, and configuration columns. Deleting an inserted
file's feature and component.delete both use it; component.delete now also
removes joints left pointing at a deleted occurrence. The body transfer
refusal moves with it, unchanged.

* Only an inserted file's feature takes its component tree when deleted

Mark the feature a STEP, IGES or mesh insert makes (`inserted`), and remove
the component tree on delete only for those and for a linked design's
feature. Deleting a copied component's independent base deletes just that
feature, as before. Older designs get the mark as they open (pending format
change), except copied components' independent bases.
2026-10-23 14:31:08 +00:00
Karl Von Richter 27d2fe6ec0 Frames: profile library, members along frame sketch lines, and the Frame Member dialog (#4003) (#4004)
* claim: #4003

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Frames: the profile library (#4003)

The first slice of frames and weldments: the cross-sections structural members
will be made of, each SolidCraft's own parametric definition built in code
(no vendor or standard size tables are shipped).

- solidcraft_doc::frame: bar, round bar, rectangular and round tube, angle,
  channel, I-beam and a generic T-slot extrusion as exact line/arc regions,
  with defaults worked out from the profile's size, refusals that name the
  dimension that does not fit, anchors and placement, and exact section
  properties (area, centroid, Ixx/Iyy/Ixy by Green's theorem).
- frame.profile.list, frame.profile.properties (with mass per metre for a
  density) and frame.profile.insert (draws a profile into a sketch, locked by
  default, at a point, anchor and angle).
- Tests against hand-computed values (rectangles, circles, composite
  rectangles by the parallel-axis theorem, fillet spandrels), hostile input,
  extrusion volume, undo; catalog entries in every locale; docs/frames.md;
  ROADMAP M15.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Frames: drop the built-in T-slot profile (#4003)

Aluminium extrusions and other vendor sections come from the user's own
sketch (drawn or inserted from the vendor's DXF), so the library keeps the
plain steel shapes only.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Frames: members along frame sketch lines (#4003)

frame.member lays one body per straight line of a frame sketch (2D lines or
3D sketch lines), its cross-section square to the line from end to end:

- profile: a built-in profile, or profile_sketch, a sketch whose material
  (nested loops alternating, so two circles make a tube) is the section in
  its own x and y around its origin; profiles picks override it.
- anchor (origin, centre, centroid or a bounding-box corner or edge middle),
  angle (an angle expression, so a parameter), mirror.
- Orientation: the profile's y as near world up as the line allows, x
  square to both; a vertical member's x is world X (frame::member_axes).
- Members follow sketch and parameter edits, undo as one step, save and
  reopen (format: pending/frame-members.rs), and are named after the profile
  (Rect Tube 40x40x3, (2)…), numbering on past names already taken.

Tests against hand-computed volumes and bounding boxes (rectangle, 3D
tower lines, parameter edit, sketch tube profile and picks, anchor/angle/
mirror), refusals, undo/redo and reopen; walk fixtures and goldens; docs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Frames: fixes from the adversarial review (#4003)

- Default member lines are what was drawn: projected and other linked curves
  and 3D wires (a face sketch's edges) and lines of no length are left out.
- A profile sketch's material starts from its drawn profiles, as
  solid.extrude's "all" does, so a section sketched on a face works; the
  even-odd test uses outlines and boxes worked out once, capped at 256.
- Member names are pinned to their lines (`names`, by line id; `body_name`
  is the base): deleting or adding a line, or deleting another feature, no
  longer renames other members, and frame.member stores every name it gives.
  body.rename renames a member on its line (also for later member features);
  a copy whose body_names were set still names its members by position.
- Built-in profile dimensions are expressions (ProfileSpec): they follow
  parameters, bare numbers take the design's units, and they are feature
  inputs. frame.profile.properties/insert read them the same way.
- Default root/toe radii shrink to the room a thick section leaves; radii
  given are checked by name; a radius must be 0 or at least 0.01 mm; error
  messages report the wall or flange value given, not twice it.
- A line within 1e-6 rad of vertical orients as vertical, so rounding never
  turns a post a quarter turn.
- A 2D frame sketch in a differently placed component is mapped into the
  member's frame, and member features recompute when placements change.
- Caps before lookups for a design's `lines`; a line listed twice is
  refused; a 3D wire that runs back on itself is not a line.

Regression tests for each, from the review's scenarios.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Frames: the Frame Member dialog on the ribbon (#4003)

- Frame Member (MODEL > Create) opens a dialog: the frame sketch's lines
  picked in the view (or All Lines), a built-in profile and its dimensions or
  a section picked in another sketch, anchor, angle, mirror and name, with a
  live preview. Edit Feature reopens it filled in.
- Lines picked in the view keep their sketch (a SKETCH_LINES input picks
  ExternalSketchCurve): line ids are each sketch's own, so two 3D sketches
  both have a `w2`, and the members went on the newer sketch's lines.
- timeline.redefine takes frame.member. Members keep their names through an
  edit unless it gives them a new body_name; frame.member takes `names`.
- A member whose section is a whole profile sketch keeps it when edited
  (the dialog shows the sketch instead of picking every region, which would
  fill a tube's hole).
- An original frame_member icon, open for review, on the ribbon, timeline
  and browser.
- The angle profile is listed as L-Angle, and web and flange as Web/Flange
  thickness, so they translate apart from the existing Angle, Web and Flange;
  the dialog's labels are in en, ja and zh. en-GB no longer repeats the frame
  command labels it spells the same.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 14:22:41 +00:00
bherbruck a51dfc9e1f Release 0.21.0-rc.2 (#5691)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 17:14:35 -04:00
Reefwalker 3ed1829cc7 fix: retain circular sketch pattern Quantity expressions (#4435) (#4607) 2026-10-23 13:45:15 +00:00
bherbruck f120285c96 Fix design format 33 for 0.21.0-rc.1 (#5610)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 13:47:48 -04:00
bherbruck 2bf3d4e11f Release 0.21.0-rc.1 (#5566)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 12:09:47 -04:00
vdirienzo 92d1331978 A renamed body keeps its number: the next body does not take the freed name (#4957) (#5053)
* A renamed body keeps its number (#4957)

The design's body counter starts over at every evaluation, so a body
renamed after a join (the join changed it, so the rename cannot be
followed without evaluating the design again) gave its number back: the
next body took the name the rename freed, and a script that names a body
found another one.

The design now saves the names a rename freed, and the counter skips
them.

* A renamed body keeps its number (#4957)

The design's body counter starts over at every evaluation, so a body
renamed after a join (the join changed it, so the rename cannot be
followed without evaluating the design again) gave its number back: the
next body took the name the rename freed, and a script that names a body
found another one.

The design now saves the names a rename freed, and the counter skips
them.

* Format
2026-10-23 13:43:28 +00:00
takuto-NA 63d81cc096 Motion Trace: regenerate kept curves only when inputs change (#5248) (#5270)
* claim: #5248

* feat(motion): regenerate kept traces when source inputs change

* feat(motion): add a parametric Chebyshev trace demo

* perf(joints): reuse face measurements across motion samples

Face-centred joint origins called Body::faces on every solve, bypassing the
reference-mesh reuse used for rigid placements. Share face measurements with
unchanged model geometry at the existing tolerance, while guarding replaced
bodies and applying offsets after the cached measurements.

Cover repeated named/nearest-face solves, shape edits, retained snapshots and
direct replacement with deterministic work counts. The 145-point Chebyshev
dimension and range updates retain identical sampled and interpolated curves.

* perf(naming): skip preparation for cached face names

Both face lookup paths spawned fresh workers over every body even when their name cells were ready. Prepare only cold cells, with direct handling of zero or one cold body. Preserve the existing parallel naming path and all face selection semantics.

Deterministic regressions cover repeated picked and unique-name lookups, misses, partial warmup, renames, snapshots and moved copies. Release Chebyshev medians fall from 859 to 50 ms for a dimension edit and 871 to 34 ms for a sweep edit; all 145 samples and interpolated points remain identical. Full cargo xtask ci passes with RUST_TEST_THREADS=4 and the existing local Windows validation overlays.
2026-10-23 13:42:36 +00:00
bherbruck 030187452a Release 0.20.0 (#5118)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 17:40:01 -04:00
raykholo 26ca82735b Circular Pattern and Revolve: a construction axis can be the axis (#2885, #4506) (#3796)
* claim: #2885

* Circular Pattern and Revolve: a construction axis can be the axis (#2885)

The dialogs send a picked axis by its name, but solid.pattern.circular
only knew X, Y and Z, and solid.revolve / surface.revolve read any other
name as a sketch line id. Picking a construction axis therefore failed.

- solid.pattern.circular takes a construction axis name, saves it as
  `axis_feature` and turns about the axis as evaluated, so the copies
  follow it when it is edited.
- AxisRef::Construction { name } for revolve and surface revolve,
  resolved at evaluation and checked to lie in the sketch plane.
- construct.plane.at_angle accepts a construction axis name (its fixed
  axis line is taken from the axis as it is now).
- Reopening these features shows the construction axis as the pick.
- Design format: pending/construction-axis-refs.rs.

* Construction axis references follow the axis in the feature's component frame (#4506)

- Revolve, Surface Revolve and Circular Pattern resolve a construction axis
  where it is evaluated, mapped into the feature's component frame.
- A line of the revolved sketch with the same id as a construction axis
  still wins, so existing scripts keep their meaning.
- Tests: the revolve keeps the reference through save and reopen and
  follows an edited axis (60π to 80π mm³); perpendicular, offset and
  profile-crossing axes are refused without changing the design.
2026-10-22 18:21:11 +00:00
bherbruck 5899e5b6c5 Release 0.19.0 (#4603)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 21:13:21 -04:00
NOWN-DEV 50313d147f solid.mirror: copies join their source's component; follow the saved placement (#1938)
* solid.mirror: copies join their source's component; follow the saved placement

Three follow-ups to mirroring bodies of placed components:

- A copy joins the component of the body it mirrors (or, when that
  component is placed more than once and a copy there would show at
  every placement, the innermost component around it placed once), so
  checks that group bodies by component see it beside its source.
- The saved placement path, not the body's name, says which component
  a mirrored body is in: inserting the same file again reuses the body
  names, and the copies of the first insert vanished.
- The mirror is evaluated again only when its own placements or its
  component's frame change, not on every occurrence move: each later
  command paid for one more mirror evaluation.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* solid.mirror: a saved placement must still lead to the body's component

A stale or edited placement path that leads to another component's
occurrence mirrored the body silently where that other component is
placed. The mirror now reports that the placement no longer exists.

The body's component comes from the evaluated body where a transfer
recorded it, else from the component its name is recorded in or its
feature's. When a later insert of the same file has taken over the name
(the recorded component lies outside the components the body's own
feature made), the placement has to lie inside those components instead,
so mirrors of the first insert keep working.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* solid.mirror: the copies' component change is a pending format change

v26 shipped in 0.15.0, so its mirror-placements note stays as released;
the change of where a Mirror with placements puts its copies is noted in
a new pending file instead.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 18:56:36 +00:00
bherbruck 034aa60d47 Release 0.18.3 (#4270)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 08:46:14 -04:00
bherbruck 8c861f9f46 Face names: pieces of a split face keep their numbers across evaluations (#3902) (#3991)
* Face names: pieces of a split face keep their numbers across evaluations (#3902)

Pieces sharing a name were numbered in the kernel's order, or by the index of the operand face
they came from. A boolean can list its result's faces in another order on the next evaluation,
and an operand made by one (a closed sweep tool) carries that order into the indices, so the
#1/#2 of a split face could swap between two evaluations of the same design. Pieces that
nothing else tells apart are now numbered along the spread of their centres (as edge pieces
already were), and pieces from different faces of one operand by kind, then by place.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Face names: older designs keep the piece numbers they were saved with

Numbering pieces by place renumbers split faces in many existing designs, and a stored name
matched exactly would then land on the other piece. Features of a design saved before this
change are marked `kernel_piece_order` by a pending format step and number their pieces as
before; features added afterwards number by place.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 08:08:08 -04:00
bherbruck e04a016e7c Align takes planes and the origin (#4248)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 08:06:32 -04:00
raykholo d9d6af51c6 Sheet metal: mirrored and copied sheet bodies stay sheet metal (#3353) (#3354)
* claim: #3353

* Sheet metal: mirrored and copied sheet bodies stay sheet metal

Mirroring a sheet metal body into a new body gave a plain solid: the
opposite-hand bracket had no flat pattern, DXF or bend table
("`Body1 (2)` is not a sheet metal body"). Copies from a body pattern or
Move with copy lost their sheet model the same way.

A copy now takes the sheet model with it (SheetBody::copied). A rigid
copy moves the flat frame. A mirror moves the frame with its x axis
turned round, so the thickness side stays, and mirrors everything in
flat coordinates (x -> -x): base, flange bend lines (run from their far
end, with their end extensions, slopes and tears swapped), panel shapes,
cut-outs, pockets, bores, letters and base sketch lines. Arcs stay exact
and loops keep their sense. A perforation field of a mirrored copy runs
its grid from the right, so its holes are the mirror image too. The flat
length, bends and K-factor are unchanged, and the copy takes further
sheet metal features of its own.

Mirror with combine is unchanged: the joined body has no single sheet
model yet. Mirroring or patterning flange features is still refused.
Sheet models are derived from the timeline, so no design format change.

* Format: note the saved from_right of a mirrored sheet's perforation field

The new `from_right` flag is saved in the design, so it gets a pending
format note. No migration: a field without it runs from the left as
before.
2026-10-21 00:54:07 +00:00
bherbruck c5129a45d7 Release 0.17.0 (#3629)
Version 0.17.0; design format 28 fixed (13 pending changes folded).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 11:41:10 -04:00
Irakli Kourtis 37a8402cae surface.blend: seam alignment, chain-topology refusal and a dialog (#764) (#2488)
* kernel: a blend runs along chains of several faces and lines closed rims up (#764)

A blend's chain may run along the boundaries of several faces (a tube's rim
along the halves of its wall): each edge continues from its own best-facing
face, read station by station. Before, a chain had to be the edges of one face,
so every rim of a revolved or cylindrical surface was refused.

Two closed chains blend from matching seams: the second chain's start (searched
by arclength, then narrowed) and direction are the ones that put each station
closest to its partner, so rims whose seams sit apart no longer twist. A
picked `seam` point on each chain fixes the start instead. A closed chain
against an open one is refused. Closed chains leave towards each other's
centroid, not a point on the rim.

Stations are read on the edges' own curves, not on the chords of the length
table (they sat up to the chord's sagitta inside a curved edge), and the
reported gap is measured to the curves.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* kernel: closed blend chains run round the same way; Hermite strip and seam tests (#764)

The second of two closed chains runs round the same way as the first (by
their area vectors), so a picked seam turns the blend by just the angle
between the seams instead of folding it over. The nearer pairing decides only
when the loops stand almost at right angles.

Tests for the issue's gates: the blend between two offset box rims is the
analytic cubic Hermite strip (control points from the chord) and keeps the
top faces' normal along both seams; picked seams a quarter apart turn the
blend a quarter round.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* surface.blend: `seam` picks where each chain's stations start (#764)

A point on each chain, saved with the feature (one pending format change),
moved with the design like `align`, and refused when it is not two points.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* surface.blend: a test between two tube rims, their seams picked and saved (#764)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* Blend dialog: edges at each end, continuity and bulge per end, stitch (#764)

SURFACE › CREATE › Blend Surface opens a dialog: the edges the blend leaves
and the ones it arrives at, each end's continuity (G0–G3) and bulge, and
Stitch to both bodies. Edit Feature brings it back and keeps what the dialog
does not show (align and seam points). Labels in every locale catalog.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* ROADMAP: M8 Blend runs along several faces, pairs closed rims and has a dialog (#764)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* kernel: a blend station on the vertex between two support faces is read on the neighbour (#764)

A station where a tube wall's two halves meet sits at a corner of one half's
parameters; with a leave direction that turns round the wall (tubes off each
other's axis) the shape could not be read there and the blend was refused. The
neighbouring chain edge's face holds the same point and reads it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* blend: review clean-ups (#764)

- ChainLine keeps one list of samples instead of four parallel lists.
- frames_on and boundary_gap take the chain's ChainLine instead of rebuilding it.
- A station is read on the neighbouring face only when it sits on the vertex the two edges
  share, each face once, and each face keeps its own walk.
- The seam rule (a closed chain starts at it, an open one runs from the nearer end) lives in
  ChainLine::start_at_seam; pair_with reuses the start of its both-ways search.
- support_faces projects with curveblend::project; loop_area sits with plane_through.
- surface.blend parses `align` and `seam` through one point_pair; the Blend and Ruled dialogs
  share body_and_edges.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 04:26:12 +00:00
leValdemar19 e27d43553c Sketch Dimension: line to circle/arc edge (#1803) (#1863)
A line and a circle or arc can now be dimensioned to the circle's edge
(ConstraintKind::LineCircleDistance, saved as line_circle_distance): the gap
while the line misses the circle (0 is tangency), or how far the edge reaches
past the line when it cuts through (stored as `inside`).

Rebased onto main as one commit (the branch's own changes; its merges of main
dropped). Conflicts resolved: the test mod lines in cmd/sketch.rs (both kept,
sorted), and README.md, whose feature list main moved to docs/capabilities.md;
the line-to-circle dimension is listed there now.



Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT

Co-authored-by: jyviko <jyviko@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 03:44:16 +00:00
Irakli Kourtis 14b7529465 Loft guide rails (#201) (#3371)
* kernel: loft guide rails (#201)

A loft follows one or two guide rails between its sections: stations are added between each two
sections, each the plain loft there moved so that the point a rail guides lands where the rail
crosses the station's plane — turned about the loft's direction and scaled (or stretched across
to the rail) with one rail, carried, turned and sized between two. The sections and caps stay
exact; the smooth loft runs through sections and stations. Solid and sheet lofts.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* doc, engine: solid.loft and surface.loft take guide rails (#201)

`rails` (one or two {sketch, curves}) and `rail_fit` (scale | stretch), stored on Loft and
SurfaceLoft (one pending format note), parsed by the sweep's rail parser (now shared) and built
through the kernel's railed loft. Rails on a loft to a point, or on a surface loft with edge
sections or end continuity, are refused as not supported yet. The rails' sketches are walked as
the feature's references and their components placed like a sweep's.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* ui: Rail, Second Rail and Rail Fit in the Loft and Surface Loft dialogs (#201)

The rail inputs and fit row the sweep dialogs have, shared through dialogs_sweep; Edit Feature
brings the rails back.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* docs(roadmap): loft guide rails (#201)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* loft rails: review clean-ups (#201)

- Sweep and loft rails share one turn-and-size map (`sweep_path::rail_frame`).
- A station's middle and the loft's direction come from one curve through the sections'
  middles (exact derivative) instead of two more plain-loft evaluations per station; at most
  33 wires, so railed faces stay light.
- Nearest points on a section use `param_on` (kept only where the search comes nearer); the
  size uses `Aabb3`; one B-spline builder; anchors keep their nudge.
- The railed and plain lofts share one path in `loft_with_rails` and `loft_sheet_with_rails`.
- The engine leaves the not-yet-supported refusals to the design's evaluation; both lofts start
  their rails from the first section's first point.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* loft rails: refuse rails on sections with holes, with a test (#201)

Main's lofts now take sections with holes (#2447); rails shape only the
outlines, so a railed loft of rings is refused until the rails carry the
holes too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 03:22:30 +00:00
NOWN-DEV af436493a2 Joints: a point origin keeps the x it is given (#2597) (#2598)
* Joints: a point origin keeps the x it is given

`joint.origin` and `joint.create` take `x` for a point origin (a
direction, laid square to z) and the point snap saves it. Two origins
given at one point with the same z and x now meet as they are: a part
turned a quarter turn about z no longer turns back (and moves) when
rigid-joined there. A point origin without x takes its x from z alone,
as before. An x along z, or of no length, is refused.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Joint relations test: a point origin has an x too

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Aac7mP9rthK3WsPpPRvCsF

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 23:56:32 +00:00
rlartot 31b41978fc Construction geometry on model vertices follows them when a parameter moves them (#568) (#2409)
Thanks @rlartot.
2026-10-19 16:11:38 -04:00
NOWN-DEV b0b59480eb Joints: relations that tie part of a placement (#2497)
Joints can tie part of a placement: parallel, angle, point on plane and more (#2496).
2026-10-19 16:08:23 -04:00
CamWight d306d6e658 Two-sided extrudes: through all (or To Object) on either side, a distance on the other (#2700) (#2728)
* claim: #2700

* Two-sided extrudes: the second distance goes the other way from the first side, either way round (#2700)

extent_sides ignored `direction` when an extrude had `distance2`, so through all with
`direction: negative` and a second distance went the positive way. The second distance now goes
opposite the first side wherever that went (direction: negative, a negative distance, a To
Object below the sketch). A pending format step makes older designs' reversed two-sided
extrudes positive, which keeps their shape.

The Extrude dialog's Two Sides shows Distance 2 for every extent type (it was hidden for All and
To Object but still sent as 10 mm) and offers Reverse; the second arrow points the other way
from the first.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* The two-sided arrows test checks each tip against the sketch, not just their order

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-19 16:05:45 -04:00
NOWN-DEV 99d8d382b9 Bill of materials: part properties on components and assembly.bom (#1888) (#1899)
* Bill of materials: part properties on components and assembly.bom

A component definition now carries part properties (part number,
description, revision, other tools' keys) and free text properties,
saved with the component and shared by its occurrences.
component.metadata and component.metadata.set read and change them in
one undo step; Paste New copies them; parts.insert numbers standard
parts from their standard and size, and parts.resize renumbers them.

assembly.bom counts the placed components (flat: parts at any depth
through their subassemblies; top: direct children), grouped by part
number or by definition, sorted by part number, and writes CSV (fixed,
quoted columns) or JSON. The app gets a Bill of Materials window on the
INSPECT panel that lists, edits and exports the rows.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Bill of materials: name a merged row's equal definitions once

Two standard parts with the same size are separate definitions with the
same name; their row now reads "SHCS M6x20" instead of repeating it.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Window widths test: close the Bill of Materials window between commands

The test closes the floating windows a command opens before starting
the next one; the Bill of Materials window was left open and measured
against the next dialogs' limits.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Bill of materials: sub-parts in their part's row, and part properties without re-evaluating

assembly.bom takes group_children: true. A part with a part number keeps
what is placed inside it (a bolt's washer and nut) in its own row, listed
under it as children (items 1.1, 1.2, with each and count) instead of rows
of their own; bolts with different contents stay different rows, and
total_occurrences is the same either way. The window has a switch for it
and shows the children under their part; the CSV lists them after their row.

Changing part properties re-evaluated the model, re-seated every joint and
rebuilt the placed model: 361 ms per change with 30 jointed bolts. A change
that only touches components' metadata and properties now takes the same
path as a render-only change (proved on the whole Document), also for its
undo and redo: 0.6 ms.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Bill of materials: look the structure up once, not per subassembly

Deciding whether a subassembly is a part (it has bodies of its own) scanned
every body of the model for each subassembly, and each body looked up its
feature by a linear search of the timeline: subassemblies × bodies × features.
assembly.bom now indexes the placements, the body owners
(Document::body_owners: one pass over the bodies with the timeline in a map,
the same rule as model_body_component) and the numbered components once per
call. 600 bodies and features with 60 subassemblies: 8.1 ms → 1.3 ms; the
old cost grows with the cube of the design's size.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:04:39 -04:00
Irakli Kourtis 1cd9983c8f Surface trim: projected curves, several kept regions, mutual trim (#767) (#1466)
* kernel: trim keeps picked regions, mutual trim, curves swept along a direction (#767)

Trim moves to surface_trim.rs: TrimKeep::Side (the old behaviour) or
Regions (the connected pieces the points pick, parted where the tool runs
along an edge). mutual_trim cuts two one-face surfaces by each other's
surface, extending one that stops short when asked. SplitTool::Curves takes
a sweep direction; a closed curve's field is signed by inside/outside
instead of extending its end segments.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* kernel: classify display edges of a face with a closed-edge hole without a panic

A hole cut by a closed curve is a loop of one edge that starts and ends at
one vertex; mapping the face rebuilt that edge through a check that
panics on it (the guard caught it and dropped every smooth flag of the
body). Such faces are now left out of the ruled-surface test.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* surface.trim: keep several regions, trim by projected sketch curves, mutual trim (#767)

keep takes a list of points (the regions they pick); curves: {sketch,
curves?, direction?} sweeps sketch curves onto the surface (along the
surface's normal: not supported yet); with + keep_with trims two
surfaces by each other, extend? meets a short one, stitch? sews the
kept pieces. Trimmed faces carry their lineage, so they are named
after the faces they are pieces of. New fields noted in a pending format file.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* Trim dialog: sketch curves as the tool, several keep points, mutual trim (#767)

The tool input takes sketch curves too; keep points are places (several
on one face add up); another surface with its keep points makes a mutual
trim with Extend to meet and Stitch toggles. Edit Feature brings it all
back. Labels in every locale catalog.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* ROADMAP: M8 trim by projected curves, several regions and mutual trim (#767)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:04:02 -04:00
NOWN-DEV e4d9015f68 sketch: points placed by expressions (#2864)
* Sketch points placed by expressions over the design's parameters

A point typed as an expression ("W", "H / 2") in sketch.point, sketch.line and
the other point arguments is fixed where its expressions come to, and moves
there again before each solve when the parameters change: an outline that
follows its parameters needs no dimensions and no solve per change. The
expressions are saved with the point (one pending design-format change), listed
with the sketch's other expressions, and renamed with their parameters; one
that cannot be worked out is refused.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Sketch point expressions: accurate params doc, out-of-range regression test

The sketch.line params said every point argument takes expressions; only those that
also take a point id do (the rectangle corners, an arc's through point and the like
are plain [x, y]). PointExprs' comment called its expressions mm. A test covers a
parameter that puts a placed point out of range and a design file whose point
expression overflows: both are errors, not crashes, and the sketch recovers.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 13:05:28 -04:00
NOWN-DEV c66e33284b Joints: offsets, angles and values typed as expressions follow their parameters (#2385) (#2386)
Thanks @NOWN-DEV.
2026-10-18 22:13:13 -04:00
NOWN-DEV 6d410c342c Joints: origins on an edge of a face, at its middle or a corner (#2403) (#2404)
* Joints: a face or circle origin keeps its turn as the face tilts

A face- or circle-centre joint origin worked out its frame's x from the normal alone
(`Vec3::any_perp`), which switches axis where the normal crosses 0.9 along X: a part on a face
tilted past about 64° by a parameter spun a right angle about the face. New origins keep the x
they have when picked (`x`, component coordinates) and each solve lays it onto the face as it is
now, so the part tilts with the face without spinning. Origins saved without it are placed as
before.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Joints: origins on an edge of a face, at its middle or a corner

`joint.origin` and `joint.create` take `edge: [x,y,z]` (a point on an edge of a planar face),
with `on` (which face; default the larger planar face beside it) and `corner` (the end near that
point). The origin sits at the edge's middle (z out of the face, y into it) or at the corner (x
and y along its two edges into the face, right-handed whichever way the edges run). The edge, the
face and the corner's other edge are kept by name and found again on every solve, so a part set
40 mm in from a panel's corner stays there when the panel changes size; a name that finds nothing
leaves the joint out with the reason.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-18 18:10:28 -04:00
bherbruck a228a5830e Release 0.16.0
Version 0.16.0; the pending design-format changes are folded into format 27.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 18:10:44 +00:00
Artem Sushchev f5a868efda Fix red main after #2247: record its robustness seeds, and keep older designs' joins of split pieces working (#2540)
#2247 changed 16 robustness seeds (bodies N -> 1, and some seeds then build
different steps; seed 54's new shell fails on #2247's parent too). Recorded
on Linux.

Designs saved before #2247 that combined a split-off piece by name (tools
Posts, Posts (1)) failed on the missing piece and left both posts off the
case. A combine now skips a missing `X (n)` when `X` is a tool too or the
join's target, with a warning. Format note for the meaning change.
2026-10-18 13:10:09 -04:00
NOWN-DEV 8313c3468a Joint origins: resolve by the named face, keep a hole's end and the turn (#2186) (#2187)
Thanks @NOWN-DEV.
2026-10-18 13:08:23 -04:00
Loohi 9c7afb6076 Single hole follows its sketch point (#2110) (#2336)
Thanks @Loohi.
2026-10-18 11:35:15 -04:00
N3MI-DG 3eeb20d2bd Browser: hidden items grey out, and folders keep their own visibility (#2308)
Thanks @N3MI-DG.
2026-10-18 11:34:55 -04:00
Irakli Kourtis 83c31d77c4 surface.boundary: surfaces through boundary curves and curve networks (#763) (#2129)
* feat(geom): surfaces through curve networks, and spline spaces to build them

Adds spline_space (clamped B-spline spaces, Hermite interpolation, exact
embedding by Bézier degree elevation and knot insertion, a monotone cubic
for reparameterising) and network (loft, Coons and Gordon surfaces through
curves in one or two directions, with G1/G2 cross-boundary conditions
against a neighbouring face). Part of #763.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* feat(kernel): boundary surfaces from sketch curves, 3D curves and edges

kernel::boundary_network turns sketch chains, 3D sketch polylines and edge chains
into network curves, gives G1 frames of the faces along open edges
(EdgeFaces), builds the B-spline face (sides split at chain vertices so a
join shares the body's edges) and joins it into a surface body by stitching.
G2 is refused for now (not supported yet). Part of #763.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(kernel): second derivatives of B-spline surfaces in the vendored truck-geometry

BSplineSurface::uuder and vvder multiplied the second differences by p
instead of p·(p − 1), as BSplineCurve::der2 does, so every surface of
degree p ≥ 3 (NURBS too, through its homogeneous surface) reported
1/(p − 1) of its second derivative: a cubic surface's curvature read as
half. This is why a G2 boundary surface on a cylinder measured half the
curvature it carries (#763). New tests hold both to finite differences
for degrees 2 to 5.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(kernel): G2 boundary surfaces against a body's face

The network always carried the face's curvature across a G2 edge; the
refusal came from measuring it with truck's halved surface second
derivatives (fixed in the previous commit). EdgeFaces now reads the
face's second fundamental form from the exact second derivatives
instead of differencing the normal. A new test holds the curvature
across a cylinder's edge to the cylinder's within 0.1%, also with a
sheared far curve; G3 is refused (a network holds up to G2).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* test(kernel): a boundary patch with straight corners measures its own area

A stadium's arcs meet its lines at 180°, so the Coons patch is singular
at its corners. From such a corner the reference mesher's boundary walk
ran onto the B-spline's extrapolation past its domain (a planar spline
passes through every point of its plane there), and the face measured
289 mm² for its 158.5 (#763). The vendored mesher's bounded projection
(nearest_projection, #2043) keeps the walk on the domain; this holds it
there, by the faces, the measuring mesh and the display mesh. The
display path (#1653) was never affected.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(geom,kernel): three-sided boundary surfaces (one side collapsed to a point)

A network curve may be a PointCurve: the apex where the two sides beside
it meet. The curves through it cross it at the point itself, its row of
the net collapses there, and the kernel's face leaves that side out of
its loop (three edges, one vertex at the apex). One point per patch, as
a side; refused elsewhere, when it moves, or with a continuity
condition. Tests: a triangle and a quarter disc filled flat with their
analytic areas (40 mm², 25π), by geom and by the kernel's faces and
meshes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(doc): boundary surfaces through curve networks and loops of three or four

FeatureKind::SurfaceNetwork saves a network as `u` and `v` curves, each
a sketch chain (planar or 3D), a chain of a body's edges with an
optional G1/G2 continuity, or a point (the apex of a three-sided
patch), and an `operation` that can join the surface into the body of
its edges. A SurfaceBoundary of three or four sketch curves, refused
until now, builds as the flat Coons patch of its loop (three collapse
the side opposite the first curve). The format change is one pending
file; feature-walk goldens record the new variant's sketches, bodies
and points.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(engine): surface.boundary through loops of three or four and curve networks

The command keeps its loop form (two to four curves of one sketch; three
and four now build the flat patch of the loop, crown refused there) and
gains a network form: `u` and `v`, each curve a sketch curve id, a
{sketch?, curves} chain (planar or 3D), a {body, edges, continuity?}
edge chain (g1/g2 with the face beside it) or a {point} for a
three-sided patch, with `operation` new or join. Edits may move between
the two forms (timeline.redefine accepts the command now that it has a
dialog).

Tests: analytic areas of loop patches and of a hyperbolic paraboloid
bounded by four 3D lines (every mesh vertex on z = xy/10), a loft
across two sketches, G1 and G2 measured across a cylinder's edge with
inspect.continuity (angle < 0.1°; curvature jump 1e-16 with G2 against
0.027 with G1), 26 hostile networks refused without panicking, and u/v
added to hostile_params_never_panic.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(ui): Boundary Surface dialog

Curves and Cross curves take sketch curves and edges (picks that meet
end to end in one sketch or body are one chain); Continuity and
Operation (New Body or Join). Two to four sketch curves of one sketch
with nothing across are the loop patch; anything else is a network.
Edit Feature brings either back (per-side orders, crown and stations
the dialog does not show are kept). Strings in en, ja and zh.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* docs: ROADMAP M8 and the bridge patch's notes for boundary networks (#763)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* test(oracle): a boundary surface through a loop, thickened (#763)

Case 83: four sketch curves (a square's three sides and a half circle
for its top) make one boundary surface, thickened 2 mm; analytic values
from tools/oracle-analytic/cases_surfaces.py (V = 2A, area 2A + 2P,
centroid by moments). Recipes gain boundary_surface, thicken and remove.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* refactor: boundary surfaces, review cleanups

Project onto the face once per derivative evaluation (the frame is
passed to natural() and reused by scale()), keep each track's
finite-difference step instead of rescanning its table, export the
kernel's edge-pick and chain caps and the default station count for
the engine, doc and dialog to share, map TooLarge spline errors to
KernelError::TooLarge, reuse the engine's operation parser, and skip
the dialog's sketch lookup when the picks are no loop.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-17 21:47:38 -04:00
Pablo López cb857f1fa7 Rib/Web: grow along the sketch normal (#2056) (#2057)
Thanks @pablopeza.
2026-10-17 14:15:03 -04:00
bherbruck 979614e60f Release 0.15.0 (#2039)
Version 0.15.0; pending design-format changes folded into format 26.
2026-10-17 11:55:05 -04:00
NOWN-DEV 2831426c51 solid.mirror: mirror bodies of placed components where they are shown (#1896)
Thanks @NOWN-DEV.
2026-10-17 04:08:22 -04:00
Irakli Kourtis 98ce6a4ee8 Sweep guide rails and two-rail sweep (#771) (#1806)
Thanks @jyviko.
2026-10-17 04:07:46 -04:00
Mateusz Sych 6232fa33c2 Joints: cam and follower coupling (joint.cam) (#1734)
Thanks @SychPL.
2026-10-16 10:26:35 -04:00
bherbruck 2c020dbcbc Revert #1682 (three-axis milling) (#1715)
Thanks @bherbruck.
2026-10-16 09:02:19 -04:00
CypherNaugh_0x 737c9358d0 Add three-axis milling with independent CAM and Fusion validation (#1682)
Thanks @CypherNaught-0x.
2026-10-16 08:26:28 -04:00
DuBearte dd5278a402 solid.hole: position takes length expressions and follows them (#1678) (#1683)
Thanks @DuBearte.
2026-10-16 08:26:23 -04:00
midasdf bbd4f29ebb Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)
Thanks @midasdf.
2026-10-16 06:26:27 -04:00
bherbruck 9b2a40781c Release 0.14.0 (#1671)
Version 0.14.0; pending design-format changes folded into format 25.
2026-10-16 06:22:21 -04:00
midasdf 07da7f8065 Class-A surfacing 2/3: surface match, boundary patch and CV fairing (#1487)
Thanks @midasdf.
2026-10-16 03:26:20 -04:00
Karl Von Richter 9422853cf9 Feature mirrors and patterns: preserve replay and add Flip/Center placement (#1619)
Thanks @Karl-VonRichter.
2026-10-16 03:01:00 -04:00
bherbruck 26bf1af93b Sketch on an origin plane faces the side you clicked (#1587)
Fixes #1586.
2026-10-16 03:00:24 -04:00
DuBearte 6f270f6259 Split Body: a sketch line as the splitting tool (#1552) (#1592)
Thanks @DuBearte.
2026-10-16 01:35:15 -04:00
Karl Von Richter 371578a06f Feat/Sketch: associative pattern tools with independent directions and Flip/Center controls (#1601)
Thanks @Karl-VonRichter.
2026-10-16 00:32:32 -04:00