Commit Graph

1161 Commits

Author SHA1 Message Date
Colin Faulkingham 9c5a636987 Parameters: accept mixed-case text units (#8960) (#8985)
* claim: #8960

* fix: accept mixed-case text parameter units (#8960)
2026-10-29 21:11:16 +00:00
semmelrinde 18dc05c83d Sketch Trim and Extend: a crossing at a curve's own end is that end, leaving no curve of no length (#9012)
* Sketch Trim: a cut at a curve's own end leaves no piece of no length

A curve that ends where another one ends crosses it there only within the
intersection's tolerance (1e-6), but bracket dropped cuts at the curve's
ends only within 1e-9 of its parameter range. A line ending on an arc's end,
trimmed from its other end, was cut a hair inside its own end and kept a
piece about 1e-7 mm long (found by a local trim fuzzer: 78 such trims in
4000 sketches, and 8 breaks). bracket now also drops a cut within that
tolerance of the curve's ends, as add_cut merges cuts that close together.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch Extend: a touch at an arc's growing end is that end, not a stop

An arc whose end is where a line ends that touches the arc's circle there
found the touch a hair beyond the end (within the intersection's tolerance),
stopped on it, and added an arc from that point to itself. A hit within that
tolerance of the growing end (1e-6, as for the far end) is now the end.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 20:48:18 +00:00
semmelrinde 5cf18ba8c3 Sketch: a constraint that would shrink a curve to a point is refused (#8988)
A constraint whose only solution squeezes curves to a point (a rectangle's
corner made the midpoint of its opposite side, or two opposite corners made
coincident) collapsed the whole rectangle while the sketch said solved. A
solve that shrinks a line or circle from over 1e-3 to under 1e-6 now counts
as one that fails, as one that throws points far away does: a strict edit is
refused, another keeps the sketch from before its solve, and the free solve
after the held ones in apply_in_order refuses the constraint.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 20:21:51 +00:00
MATHEUS PINHEIRO RAPOSO 70d39bb4f3 Three tests pass on Windows with an 8.3 TEMP path (#8968)
On a Windows account whose %TEMP% is a short (8.3) path, such as
C:\Users\MATHEU~1\AppData\Local\Temp, three tests failed because they built
their folders from std::env::temp_dir(), and the agent file scope refuses short
names ("not allowed for this agent: short (8.3) names such as `PROGRA~1`"):

- engine: cmd::render::settings_tests::embedded_hdr_capture_rejects_parameters_scope_and_cpu_primaries_without_mutation
- ui-egui: agent_chat::tests::file_actions_wait_for_the_user
- ui-egui: agent_chat::tests::permission_modes_decide_what_asks

They now use vfs::temp_dir(), which spells the folder with long names, as
libraries_tests and motion_tests already do (#1385, #1211).

Checked on Windows 11 x64 with the 8.3 TEMP: the agent_chat and
render::settings tests (113) pass, and clippy -D warnings is clean for both
crates.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 19:13:36 +00:00
Homero Thompson 184d4720be Sketch: a dimension can measure a model edge (#7912) (#8010)
* claim: #7912

* Sketch: dimension a sketch entity against a model edge

A dimension took sketch entities only, so measuring a sheet-metal body's edge
was refused with "cannot dimension that combination of entities". The
entities now take a model reference too, an {edge: [x,y,z], body?} or a
{vertex: [x,y,z], body?}, which is projected into the sketch first, as the
constraint commands' operands are since #6348, and measured there.

The Dimension tool picks a body's edge or vertex when the sketch has nothing
under the cursor, and reads the pick back into the reference the command
takes.

* style: rustfmt the sketch dimension command

* Cap the entities one call may project

A dimension projects the model references among its entities into the
sketch, one link and one resolve each, and the loop had no cap: a single
request could make the engine resolve thousands of model edges before
the dimension refused the list. The count is now refused before anything
is projected, and the projection loop stops at the same limit the
Project command uses.

* Sketch dimension on a model edge: use the sketch store after the store refactor

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 18:54:42 +00:00
semmelrinde 31218b1451 Sketch drag: an end the cursor can't reach stays where it is (#8944) (#8967)
The cursor correction tries the constraints' free directions a whole step at
a time and took a step as soon as the cursor's distance fell, by any amount.
Along freedom that can't reach the cursor (the far end of a line held only
by its direction), retracting onto the constraints still moves the cursor by
rounding, so such steps were taken: the end walked away a step at a time, and
a line measured by an angle could shrink to nothing, as in #7635. A step now
has to move the cursor itself by more than the solve's tolerance.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 18:54:27 +00:00
tr1pp4 cb34eef6aa Settings profiles: save, switch, export and import input and interface settings (#6237) (#6254)
* claim: #6237

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Settings profiles: save, switch, export and import input and interface settings (#6237)

A profile keeps the Interface, Navigation and Sketch preferences (mouse mode,
radial menu and gestures with every studio's lists, theme, scale, font, ...),
the language, the keyboard shortcuts, the toolbar, the S box favourites and
the imported theme it uses under a name. Machine-specific settings stay out
(3D mouse, graphics, units, AI, recent files).

- Preferences > General > Settings profiles: choose the active profile to
  apply it, Save, Rename, Delete, Export... and Import...; a note shows when
  the settings differ from the saved profile; Cancel takes a switch back.
- settings.profile.{list,save,apply,rename,delete,export,import} commands for
  the control channel, palette and scripts; the engine checks the parameters,
  the app does the rest.
- One `solidcraft-profile/1` file; import checks the format and name, drops
  unknown keys and unreadable values, caps sizes, never switches, and never
  panics. Each preference is applied through prefs::set, so a value this
  computer refuses keeps its current one and is reported.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Glossary: settings profile, and "profile" among the words with more than one meaning (#6237)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Settings profiles: new strings in a pending locale file, not the catalogs (#6237)

New UI strings now go to assets/locales/pending/ (CONTRIBUTING.md), so
this pull request no longer edits the shared catalogs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Preferences snapshot: compare the toolbar, favourites and profile too

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Settings profiles: keep a command's several keys (#6237)

Since a command can have several keys (#6288), the keymap saves a list where it has more than
one. A profile's checks only took a single key, so saving or importing a profile dropped such a
command's shortcuts. They now read the keys as the keymap does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Settings profiles: Arabic, Hebrew and Vietnamese strings (complete catalogs) (#6237)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Tripper <tripper@localhost>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-29 18:42:36 +00:00
HiroKenEz c857f2fe70 parameters.add: a parameter with no unit takes the design's units (#8865) (#8880)
* claim: #8865

* parameters.add: a parameter with no unit takes the design's units (#8865)

A new parameter given no unit took "mm" for any length or bare number, so
in an inch design `parameters.add {name: v, expression: "40/2"}` made a
20 mm parameter where the Parameters dialog makes 20 in. The unit a new
parameter infers is now a length in the design's units (mm designs are
unchanged); parameters.change on a new name and parameters.import share
the same inference. Angles and unit-less values keep their units.

A definition typed into a value of no fixed kind (a coupling's pitch,
a joint's value) still reads its bare number as millimetres, as that
field does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 18:18:04 +00:00
kaltenbrunnermarkus 5f11d92458 Opening a design pins its body names, so the first undo evaluates nothing (#8939)
Problem: a design saved before body names were pinned (#6403) is pinned by its first command
that changes it, as part of that command. Undoing that command went back to the unpinned design,
whose fingerprints no evaluated result matched any more, so the first undo after opening
evaluated the whole timeline again: 63-72 s in the SELENE rover (5,484 features) when opened
from the command line or headless (`Session::opened_at`), 0.08 s with this change. `doc.open`
pinned at the end of the command instead, which kept undo fast but left the design with unsaved
changes on opening.

Solution: `Session::opened_at` pins the names as it opens the design, with the names the file's
bodies have (no result changes, so nothing is evaluated), and takes the pinned design as the
saved one: opening is no change.

Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
2026-10-29 18:15:47 +00:00
Ahmad Khan a7048f41ab Sketch: equation-driven curve, a curve from x(t) and y(t) formulas (#8352) (#8353)
* claim: #8352

* Sketch: equation-driven curve, a fit point spline from x(t) and y(t) formulas (#8352)

sketch.equation_curve draws a curve from formulas in the expression
language and the design's parameters: x(t) and y(t) over a range of t, or
y = f(x) over a range of x. The curve is a cubic fit spline through fixed
points sampled from the formulas, as many as keep it within a tolerance
(0.01 mm by default, at most 500 points); a curve that ends where it starts
closes smoothly. The sketch keeps the formulas (one new design-format
file), places the points again before every solve so they follow the
parameters, and sketch.equation_curve.edit changes them, keeping the joined
end points. Both commands have input and output schemas.

* Sketch: Equation Curve window, its Edit menu item, labels and guide (#8352)

The ribbon's Equation Curve opens a window for the form (parametric or
explicit), the formulas, the range and the tolerance; OK runs
sketch.equation_curve. Right-clicking an equation curve offers Edit
Equation Curve, which reopens the window on its formulas and runs
sketch.equation_curve.edit. New labels and help in a pending locale file
(with ar, de, he, ja, ko, vi and zh), the icon, the glossary term and the
sketching guide.

* Equation curve: one if for closing the sampled points (clippy collapsible_if)
2026-10-29 17:42:59 +00:00
semmelrinde 8b1ee94296 Sketch: an edit whose solve throws points far away is not taken (#8931)
A held solve applying a constraint, or the edit's own solve, could find a far
solution of the constraints and move points millions of millimetres while
the sketch said solved. Such a result now counts as a failed one: the next
held solve is tried, or the edit is refused.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 17:24:02 +00:00
Nathan Dane 6255a10e80 Viewport status item: engine list of what is on (#8545) (#8554)
* claim: #8545

* Declare ordered viewport status items (#8545)

* Keep legacy surface analysis coexistence behind a preference (#8545)
2026-10-29 17:11:34 +00:00
PaddleStroke 6ebfe91661 History: say why an edited feature behind the marker changes nothing (#8100) (#8727)
* claim: #8100

* History: say why an edited feature behind the marker changes nothing (#8100)

Editing a feature that sits after the history marker (double-clicking its
greyed-out item) rolls back to it, previews the change, and on OK puts the
marker back where it was: the feature stays rolled back, so nothing in the
view changes and nothing says why. That is the silent "pattern of a cut
does nothing" in #8100 (the reporter's design has its pattern behind the
marker; on main the pattern itself builds fine once rolled forward).

- timeline.redefine replies `rolled_back` and, when true, a `note`; it also
  carries the feature's `warning` (for a rolled-back feature, the one its
  constructor met building it at its place).
- The window shows that note in the status line after such an edit.
- A rolled-back item's tooltip in both History layouts says it is after
  the history marker and not built.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Pending locale: Arabic, Hebrew, Japanese, Vietnamese and Chinese for the rolled-back notes

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-29 17:11:10 +00:00
N3MI-DG 699d730151 Button head cap screws, ISO 7380-1, in the standard parts library (#8006) (#8017)
* claim: #8006

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* Parts library: button head cap screws, ISO 7380-1 (#8006)

Insert Part offered the socket head cap screw but no button head, so a
design using button heads had to stand in a cap screw and accept the
wrong head. A button_head_cap_screw family now sits beside it, taking
the same parameters from the ISO 7380-1 table over M3 to M16.

The head is a new Head::Dome: the shank and the head revolve as one
outline, with the rim at dk, a short cylindrical flank, the arc of the
crown, and a flat top around the socket, so the hex socket stays a plain
cut on a plane. The standard draws the flank and the flat but dimensions
neither; they are 0.15 k and 0.7 s, and the comment on those constants
records what that costs against the standard's crown radius r1 and why
neither other fractions nor r1 taken as given does better. dk, k, s and
t are exact, each checked against three reproductions of the table.

Insert Part, Change Part Size and the bill of materials need no change:
they read the families and their table rows from parts.library.

The wider fastener request is issue 7692; this is only the one family
from it, and leaves the rest of that list open.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* Parts: format after the rebase

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Pending locale: the Button head cap screw family name

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-29 16:43:36 +00:00
N3MI-DG d6d6c7d9ee Copy and paste bodies and components between designs (#3511) (#3512)
* Components: copy and paste bodies and components between designs and components (#3390)

Squashed for the rebase onto main.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* claim: #3511

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Paste New: copy from a design other than the one pasted into

`component_clone::paste` read the design it copies from through the session it pastes into.
`build` now takes the source (document, evaluated model, unapplied moves) apart from the
target session; Paste New within one design passes the session as both, as before. Names are
numbered against the target's names.

From another design (`Source::copied`, a `ForeignCopy` snapshot taken at copy time):
- names are kept where the target doesn't have them, else numbered;
- the user parameters the copy uses come along, `w_2` where the target has a `w`, with the
  copied expressions following;
- a copy whose features use what isn't in it (bodies, sketches, faces, parameters outside it)
  is refused with a list of what; `FeatureKind::input_bodies` lists the bodies a feature uses;
- configurations stay with their design, and the target's timeline marker must be at the end;
- a body moved in from outside comes as an imported base named `BodyImport1`.

Body transfers are pointed at the copy's components before they are added: `add_feature`
checks that the components they name exist, which another design's don't.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Engine: paste bodies and components copied in another design

`component.paste_from_design` pastes what `Session::foreign_copy` holds, at the same world
coordinates as in its design, into the active component or `component` (placed by
`component_path`; a component placed more than once gets it in every instance), as one step
to undo:
- bodies as imported bodies, without their history, in one Import feature (named as any
  import is, "Import1"); a body seen in another placement ("Cube (B:2)") pastes as "Cube";
  names the target has are numbered;
- components as independent copies (Paste New from the snapshot): with their history,
  appearances, materials, joints and motion inside them; joints to the outside stay behind.

Tests: bodies (position, naming, target component, undo; a body of another placement) and
components (history, appearances, a part placed twice, editing independently, save and reopen,
undo; user parameters renamed; refused when using a body outside it; bodies moved in).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Clipboard: copy in one design, paste in another

Copying or cutting bodies or components also keeps a snapshot of them (`ForeignCopy`); another
tab pastes it with `component.paste_from_design`: bodies as imported bodies, components as
independent copies (Paste and Paste New alike), folded and selected. Cut pastes as a copy
there, the original staying; Esc on the cut leaves nothing to paste anywhere.

The last copy in any design is what pastes: each copy or cut is numbered, and a tab whose own
copy is older empties its clipboard when it is switched to (`drop_stale`). A failed copy
anywhere leaves nothing to paste in any tab.

Tests: bodies and components pasted in another tab, the last copy winning across tabs, cut
as a copy. `copied_bodies_stay_with_their_design` gave way to the cross-design test.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Clipboard: what is selected wins over a design row picked earlier

Copy copied the whole design as a linked component whenever the design's
browser row was still picked, even after a component, body or feature had
been selected in the view or another tab, and failed in an unsaved design.
The design row now gives way to anything selected, and switching tabs
drops the picked components of the design left.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Put the Paste from Another Design label in the pending locale file

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Tests: unground the placement before moving it (a design's first part is grounded)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drop locale keys main already folded into en.json

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Pending locale: Paste from Another Design in the complete catalogs

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-29 16:31:09 +00:00
Frank 162b3cd4ed Sketch Intersect: add Faces/Bodies and Projection Link options (#1110) (#7989)
* Sketch Intersect: add Faces/Bodies and Projection Link options (#1110)

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

* Sketch Project: add Geometry/Bodies and Projection Link options (#1110)

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

* Sketch Project/Intersect: keep exact lines and arcs of whole bodies, no noisy rebuild warning (#1110)

Whole-body silhouettes and sections fit lines and arcs tightly and snap arcs
tangent to their neighbours. A rebuilt projection warns only when it removed
the user's own constraints or curves. Pending locales cover ar, he and vi, and
the preselection tests use the direct-pick workflow.

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

* Select Other: label curves from Intersect as intersected (#1110)

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

---------

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
2026-10-29 16:09:18 +00:00
raykholo 3cdfec798f Timeline: joints in feature folders (#8306) (#8316)
* claim: #8306

* Timeline: joints in feature folders (#8306)

timeline.group and timeline.move_to_group take joints as well as features, so
hundreds of joints fold into one folder tile. A closed folder shows one tile
whatever it holds; opening it shows its features and joints in both the bottom
and left History. Suppress, delete and ungroup on a folder reach its joints too
(one undo step), deleting a joint removes it from its folder, and an unknown
joint id or name is an error. Saved with the design; designs without joint
folders read and write as before.
2026-10-29 15:59:18 +00:00
Colin Faulkingham 4e78acc7a2 Sketch: the same constraint twice is one constraint (#5224) (#8850)
* claim: #5224

* Sketch: the same constraint twice is one constraint (#5224)
2026-10-29 15:31:18 +00:00
Dahak Builds 35601da3f0 3D sketch: 3D Line, Spline and Point buttons start tools (#8040) (#8041)
* claim: #8040

* wip: 3D line/spline/point tools (#8040)

* Take sketch.move3d off the toolbar help backlog now that it is agent-only (#8040)

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-29 15:10:41 +00:00
austin62jake 3e01081ff9 Control token: a closing window removes only its own token and discovery files (#8794) (#8837)
* claim: #8794

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

* Control token: a closing window removes only its own token and discovery files (#8794)

Under Flatpak each instance has its own loopback, so a second window
binds the same port number as the first and writes the same
<port>.token, <port>.pid and current.port in the shared data folder.
At exit the first window deleted them all, unconditionally, leaving the
second window running with no token file a client could read.

remove_token_file now takes this launch's token and removes the token
and process files only while the file still holds it; the process id
can't tell instances apart, as every Flatpak instance has the same one.
remove_current_port also takes the token and keeps the discovery file
while another launch's token file holds that port, and removes
current.pid with current.port (it was left behind).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-29 15:01:45 +00:00
Colin Faulkingham 443e5cd59d Feature editor: allow visibility changes while editing (#8810) (#8827)
* claim: #8810

* fix(engine): preserve feature editors across visibility changes (#8810)
2026-10-29 14:26:24 +00:00
Charlie 5a0abb8710 feat(align): add Components mode to Align for occurrence placement (#7224)
Align gets an Object Type row (Bodies | Components). In Components mode it runs the new
occurrence.align command, which moves only the chosen occurrence placements (their
transforms) instead of adding an Align feature to the shared component, so other instances
stay where they are.

- occurrence.align: from/to points, snaps, planar faces and planes in world coordinates,
  flip, capture/pending, grounded and rigid-group refusals as occurrence.move.
- A viewport or browser-body pick takes the placement directly under the active component.
- A placement inside a subassembly placed more than once still moves (as occurrence.move
  does) but the dialog warns, and the reply lists it under shared.
2026-10-29 14:19:05 +00:00
cronos 28e26209f3 Assembly Move: drag allowed joint freedoms (#6679) (#6904)
* feat: add joint-aware assembly Move handles and live motion readouts

* test: improve render job failure diagnostics

* fix: preserve assembly Move compatibility and viewport theme colors

* ci: skip default label sync for fork PRs

* fix: keep Windows CI checks portable after main rebase

* test: cover RTL assembly strings and stable refraction job

* i18n: cover assembly Move in Vietnamese

* i18n: cover assembly Move in French

* fix: complete CGA palette for assembly motion handles

* fix: complete Assembly Move palettes and Turkish strings

* fix: retain assembly move cache answers and toolbar help

* style: format merged assembly Move navigation guard

* fix: align Assembly Move preferences and tests with main

* Fix offline update fixture synchronization and clipped prism intersections

Wait for all v5 manifest requests before deploying v6. Intersect hole-free prism sections over their common height, retaining the established B-rep path for newly clipped perforated sections. Preserve the failing property seed and add closed-form and cap-boundary regressions.
2026-10-29 13:57:31 +00:00
Ryan 5e0e168ae9 Properties: moment of inertia, principal axes and first moments of a part or assembly (#8095) (#8103)
* claim: #8095

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Properties: moment of inertia, principal axes and first moments of a part or assembly (#8095)

component.properties and occurrence.properties report each closed body's
inertia tensor about its centre of mass, and in total the tensor about the
total centre of mass (world axes, g·mm²), its principal moments and axes,
the first moments, and with `about: [x, y, z]` the tensor about any point.
The tensor comes from each body's welded export mesh, tessellated once per
body, scaled to the measured mass and turned by each placement; bodies add
by parallel axes. The maths is a new crates/geom inertia module.

The Properties window shows the first moments, the tensor, the principal
moments and axes, and the view marks the centre of mass with the principal
axes while it is open. Inspect → Measure → Properties now opens that window
(it ran the command and showed nothing).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Properties: Copy matrix, and the whole design's card titled just Properties (#8095)

Copy matrix, under the tensor, puts it on the clipboard as three lines of
tab-separated values at full precision, in the units shown. The card for
the whole design is titled Properties; one opened on a component,
placement or bodies keeps its name.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Properties: measure beside the window, so a large assembly doesn't freeze it (#8095)

Properties ran on the window thread: 18 s on a 144-body design, with the
window answering nothing meanwhile (#5203). In the desktop app the card now
measures on a copy of the session on a worker, the way #4614 made agents'
measures work, says "Measuring…" until the reply is in, and Close drops it.
A quick measure still shows at once; headless, tests and the web measure in
place.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 13:47:44 +00:00
semmelrinde 6a183cce02 Sketch corners: a corner cut is refused where two lines lie in line, as rounding is (#8802)
Chamfer at a corner of two lines lying on each other cut both back and
added a line of no length between their ends; lines in line with each
other have no corner either. chamfer now refuses a corner angle of 0 or
180 degrees with Fillet's message, "the lines are parallel" (found by a
local trim fuzzer).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 11:49:31 +00:00
semmelrinde cf86f18c11 Sketch: an end held on a removed curve where another curve ends stays tied (#8779)
A trimmed circle ended on a line exactly where an arc started on that
line, held there by a point-on-curve tie. Trimming the line away dropped
the tie and left the two ends on one spot, untied. remove_curves now ties
each point held on a removed curve at one of its ends to that end before
the curve goes (found by a local trim fuzzer, 15 -> 12 cases in 2000
seeds).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 11:07:28 +00:00
Nathan Dane 3cc10acafa Render lights: uniform light list, solo and mute, and the Light editor (#6281) (#7265)
* Render lights: uniform light list, solo and mute, and the Light editor

* Render lights: Lighting and Light editors to the approved design

* Render lights: the scale-test frame carries the product light list

* Restore the stable Render light mute target on the shared eye control

* fix: validate the viewport BRDF probe with current shader dependencies

* fix: compile legacy lighting controls only for tests

* fix: scope the legacy lighting preset import to tests

* fix: reuse the merged Add Light label and translations

* test: enable the implemented Add Light radial action

* fix: restrict the legacy CPU vector editor to tests

* test: reveal Output before checking Lights browser focus

* test: use the published Browser card rectangle for Output scrolling

* test: reveal Output children before exercising editor navigation
2026-10-29 08:40:51 +00:00
semmelrinde 2d56f5d599 Construction: a vertex where another body's edge runs past stays its corner (#8650) (#8722)
A vertex pick found its named edges and then picked each again by a point
on it, among the edges of every body. At a corner where another body's
edge runs past (a wall against a side wall), all three became that edge,
and the vertex its end 3 mm away. Take each named edge's ends from the
body that has it.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 08:03:31 +00:00
raykholo aee57875f5 Sketch Fillet: 3D sketch lines are not offered and say they can't be filleted yet (#4160) (#4177)
* claim: #4160

* Sketch Fillet: 3D sketch lines are not offered, and say they can't be filleted (#4160)

The Fillet tool offered 3D sketch lines as picks, and sketch.fillet then
refused them with "`a` must be a line". The tool no longer offers them, and
the command refuses them with "not supported yet: filleting 3D sketch lines".

* Sketch Fillet and Chamfer: refuse all spatial sketch curves (#4160)

* Sketch corner test: give the picked curve its point (#4160)

main added a point to sketch-curve hits after this branch was written.
2026-10-29 07:22:53 +00:00
Nathan Dane d2fcab8432 Render shot editor: camera and frame controls, aspect presets, guides and frame overlay (#6281) (#7232)
* Render shot editor: camera and frame controls, aspect presets, guides and the frame overlay

* Render shot: Shot editor and Scene overview to the approved design

* Distinguish Render stage variants from native window frames

* fix: restore library inspection after clearing shot selection

* test: follow the merged Output Check navigation

* test: inspect Check without requiring a preflight result

* test: cancel Shot removal through its shared dialog action

* fix: remove obsolete Inspector stage form after editor integration

* fix: preserve Appearance Advanced when clearing Wear focus

* test: expect the dedicated Check editor from Scene overview
2026-10-29 07:03:24 +00:00
raykholo afe7dcd4e1 Allow sketch Mirror to use origin axes (#4193) (#4207)
* claim: #4193

* Sketch Mirror: an origin axis can be the mirror line (#4193)

Mirror accepted only a straight curve of the sketch. It now also takes an
origin axis that lies in the sketch plane ({axis: X|Y|Z}), projected into
the sketch as a fixed linked line, so the copies stay symmetric to it and
follow the source when it moves.

* Sketch Mirror: use current sketch store (#4193)
2026-10-29 05:08:00 +00:00
Nathan Dane bd8cb4e6d6 Render output: Effects and Check sections, Size presets panel and the Check chip (#6281) (#7233)
* Render output: Effects and Check sections, Size presets panel and the Check tool chip

* Render output: Sampling, Effects and Check editors as child rows under Output

* fix: restrict legacy Output controls to test builds

* fix: cover status controls and reveal Effects test targets

* fix: include shared quality reviews in copied check reports

* fix: remove the obsolete Effects GPU guard after Wear integration
2026-10-29 04:39:34 +00:00
Nathan Dane c1925bb219 Render appearance: click, drag and paint to assign, Pick Up, copy and paste (#6281) (#6431)
* Render appearance: click, drag and paint to assign, Pick Up, copy and paste, and Remove

* Exclude the workspace Shots strip from dialog width checks

* Exclude the collapsed Shots control from dialog width checks

* Retain assembly cache listings and measure actual dialog bounds

* fix: handle toast button rectangles in assignment status

* fix: restrict gallery note measurement helper to tests

* test: measure assignment help at the catalogue footer

* fix: share the command revision snapshot after restacking
2026-10-29 04:33:31 +00:00
semmelrinde f4e52c4d3e Sketch: points tied only through a removed curve's end stay tied (#8640)
* Sketch: points tied only through a removed curve's end stay tied

Removing a curve removed its orphaned end points with their constraints, so
two points made coincident with such an end lost their tie although they
still met: two rectangles' corners on one arc end came apart when the arc
was trimmed. They are now tied to each other before the point goes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: keep the tie test with the other trim tests

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 04:14:22 +00:00
Colin Faulkingham 99664a4d35 fix: keep expression move distances on world axes (#7234) (#8508) 2026-10-29 03:39:39 +00:00
austin62jake d8d22cd52a 3MF export: a component's bodies as one object with parts (#8139) (#8187)
* claim: #8139

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

* 3MF export: a component's bodies as one object with parts (#8139)

file.export and file.save_mesh wrote every body as its own 3MF object and
build item, so a slicer loaded a multi-body part as separate objects and
could arrange them apart on the bed. With objects: "component", each placed
component that holds two or more bodies is written as one object whose
<components> are its bodies' meshes, built once, so PrusaSlicer, OrcaSlicer,
Bambu Studio and Cura load it as one object with a part per body, each of
which can take its own filament. The design's own bodies, and a component
with a single body, stay objects of their own. The default (objects: "body")
writes the same file as before.

- io: model_xml_parts and write_3mf_parts write the parts; export_with_parts
  maps body names to them. model_xml_with and export_with_quality give the
  same output as before.
- engine: mesh_parts reads `objects` (component is refused for formats
  other than 3MF); component_parts groups the placed bodies by placement,
  each part named after its occurrence (Bracket:1, Bracket:2).
- file.save_mesh passes the parts on when it also sends the file to a slicer;
  file.send_to_slicer's own folder export is unchanged.

Fixes #8139.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-29 03:35:38 +00:00
Nathan Dane 40ff251e5f Render wear: a Wear row and editor for the aging layers (#6281) (#7459)
* Render wear: a Wear row and editor for the aging layers

* test: read Wear header text from accessibility label values

* test: restore body picks for Wear header recovery assertions
2026-10-29 03:29:10 +00:00
Nathan Dane 09bf603588 Render environment editor: rotation, intensity, backdrop colour and ground (#6281) (#7231)
* Render environment editor: rotation, intensity, backdrop colour and ground through render.environment.set

* Render environment editor: rotation ring in the view with one undo step per drag

* Render environment: Source, orientation, backdrop, ground and atmosphere sections

* Keep segmented controls inside their allocated rows

* fix: compile legacy environment controls only for tests
2026-10-29 02:49:16 +00:00
semmelrinde f071f00155 Sketch Trim: an end at a place several curves cut is tied to the one with an end there (#8612) (#8628)
Where several curves cut at one place, trim pinned the new end onto the
first of them. At the touch point of two circles that was a rectangle side
passing through, and once a later trim removed the side the arc ends were
loose: a trimmed dog bone kept two untied ends.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 02:45:35 +00:00
semmelrinde e4cfbbd0c3 Sketch Coincident: refuse a line's two ends, as MidPoint refuses its own end (#8611)
* Sketch Coincident: refuse a line's two ends

Making a line's two ends coincident shrinks it to a point; a Parallel or
Perpendicular on it afterwards has no direction to hold and a later solve
could throw points far away while reporting solved, as with a line's own end
as its midpoint (#8562).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch Coincident: keep the own-ends test with the other Coincident tests

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 02:21:05 +00:00
The Nomad 674ef84b53 Add History playback to the Inspect ribbon (#3693) (#7853)
* claim: #3693

* Fix timeline playback to show each rebuilt feature

* Move History playback into the Inspect ribbon

* Refuse Play History up front when playback couldn't run

Starting Play and the per-frame check that stops it were looking at
different app state, so Play could be accepted during an apply, a delete
check or queued history work and then stop silently on the next frame.
Both now use one playback_blocked check.

The UI also reads the engine's PlaybackAction as the typed enum instead of
matching strings, so a bad reply is an error rather than a quiet toggle.

* Put Play History in the History controls

History now shows five controls in transport order: start, previous,
play, next, end. Play runs timeline.play, so it turns into Stop while
playback runs, same as the ribbon button and the shortcut.

It's on by default (#3688, #3740, #4216). Anyone who wants the old four
controls back can right-click them and pick Hide Play Button, or clear
history_play_button under Preferences > Interface. In a named vertical
History too narrow for five buttons beside its grip, Play is left to the
ribbon rather than overlapping the grip.

* Draw the History Play button as a plain play/pause glyph

The Play button in the History controls now uses the same drawn glyphs as
its neighbours: a filled triangle, and two bars while History plays. The
triangle is bigger than the step arrows so it doesn't read as Forward.
The ribbon command keeps its timeline_play and timeline_stop icons.

* Keep the playback changes clear of PRs queued ahead

Several PRs in the merge queue touch the same lines, so this moves ours
aside without changing behaviour:

- history_play_button and its reset-test row sit with the other History
  preferences, not beside view_confirm_corner (#7248 adds status_bar there).
- History keeps main's history_transport_width() for four controls (#6430
  and #7459 call it); the Play button's count uses history_controls_width.
- A new or opened document stops playback after dim_view::cancel(), clear
  of the line #7819 adds after reset_chat.
- The Play/Stop label swap moves from interactive_command_info, which #7906
  rewrites, into the ribbon's command_info.

* Stop playback after the command completes, clear of #6433

#6433 rewrites the session.execute line in execute_command, and our playback check sat right under it, so the queue couldn't merge the two. Checking the revision after command_completed does the same job a couple of lines later.

---------

Co-authored-by: cfaulkingham <colin.faulkingham@gmail.com>
2026-10-29 02:14:53 +00:00
phanoob ba52632985 Tabs: Ctrl+Tab shows the next design tab, Ctrl+Shift+Tab the previous one (#8565) (#8597)
Two new commands, view.next_tab and view.previous_tab, with Ctrl+Tab and
Ctrl+Shift+Tab as their default keys: they appear on the Keyboard Shortcuts
page and can be rebound or cleared like any other. The window steps along the
tab strip and goes round at either end; one design alone stays as it is, and
a "save changes?" prompt keeps its tab shown. The engine only echoes the
step (no design edit, no undo step); engine.batch refuses them like the
other steps that go to another design.

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 01:25:12 +00:00
raykholo 0e01dc9bad Pattern counts: say when a parameter has a length unit, and refuse fractional counts (#5066) (#5337)
* claim: #5066

* Pattern counts: name a length-unit parameter, refuse fractional counts (#5066)

A count parameter created with a length or angle unit now gets an error
that names it and says to set its Unit to none. A count that evaluates to
a fraction is refused instead of being rounded silently.
2026-10-29 01:00:10 +00:00
semmelrinde 1937dea04b Sketch constraints: refuse one curve picked twice for a two-curve constraint (#8577)
Parallel, collinear, equal or concentric of a curve with itself was added
as a constraint that always holds; perpendicular or tangent to itself was
refused as geometry that can't move. These six now refuse one curve
picked twice, as Coincident already does for a point, and leave the
sketch as it was. Constraints already in a design are untouched.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 23:52:44 +00:00
semmelrinde 17807ab6dc Sketch MidPoint: refuse a line's own end as its midpoint (#8562)
A line's own end held at its middle shrinks the line to a point. The
solve accepted that, and a later angle, tangent or parallel on the line
had no direction to hold: its points went millions of millimetres away
while the sketch still reported solved. MidPoint now refuses the pick,
saying why, and leaves the sketch as it was. Constraints already in a
design are untouched (only the command refuses).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 23:11:05 +00:00
momysnow 1445b5a4f0 Extend: pick two curves to extend both to where they meet (#4750) (#8392)
* claim: #4750

Co-Authored-By: Claude <noreply@anthropic.com>

* Extend: pick two curves to extend both to where they meet (#4750)

`sketch.extend` gains a second form: `curves: [a, b]` names two lines or
arcs, with an optional `at: [[x,y],[x,y]]` naming the end of each to grow
(default: the end nearest the meeting point). Both grow along their own
line or circle to where they cross and the two ends are joined with one
Coincident, in one undo step. `moved` is the joined end's id.

- Where two crossings are possible (line and arc, two arcs) the one with
  the least total growth is used; a tie is refused.
- A curve that already reaches the point does not grow. An end held by
  other geometry or a constraint stays and gets a new line or arc.
- Parallel or collinear lines, curves that never meet, a point behind the
  chosen end, the same curve twice, splines, ellipses, infinite lines,
  offset geometry and malformed `curves`/`at` are refused with no change.
- The single-curve form is unchanged; its code is shared through
  `grow_line` / `grow_arc`.

Canvas: in the Extend tool, Shift-click two curves. Shift goes through
the tool modifier registry as the new `extend_pair` action, and Extend
turns off Shift's midpoint snap. Escape drops a pending first pick. The
sketching guide describes the gesture.

Co-Authored-By: Claude <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-28 23:10:24 +00:00
Colin Faulkingham 5221103369 Components: a component named like the design is reachable by name (#8358) (#8423)
* claim: #8358

* Components: a component named like the design is reachable by name (#8358)

Document::find_component resolved the design's own name to the root component (id 0) before
searching the component list, so a component that shares the design's name was unreachable by
name: appearance.assign reported `no component `CurtainRailPlug`` (the same lookup serves every
command that takes a component by name).

An exact component name (or component id) match now wins over the design-name fallback; "0" and
"root" still always mean the design.

Regression test: a_component_named_like_the_design_takes_its_appearance_by_name (fails on main
with the reported error, passes with the fix).
2026-10-28 22:07:58 +00:00
NOWN-DEV eb29c4b2d8 Sheet metal feature commands: typed parameter contracts (#6581) (#6582)
* claim: sheet.* typed parameter schemas

* Sheet metal feature commands: typed parameter contracts

sheet.flange, sheet.perforate, sheet.hem, sheet.fold, sheet.unfold, sheet.refold and
sheet.convert read their parameters by hand, so a misspelt key or a value of the wrong
shape was ignored or failed late, and describe_command had only prose for them.

Each now has a contract in schema/sheet.rs, checked in front of the unchanged handler,
and returns FeatureResult. The values no shared type fits (sheet-edge points, an edge
flange's edges, a fold's line and fixed point, the flange type, the positions, the
relief shape and the perforation pattern) get types that call the handlers' own
readers, split out of cmd/sheet.rs, and give their messages. The rule's values
(thickness, K-factor, bend radius, reliefs) stay out of the contracts: the handlers
refuse them, and strict refuses them as unknown keys.

A test passed a nested `base` object whose `sketch` the flange never reads; it now
names the sketch at the top level.

Part of #2829 (#6581).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sheet metal contracts: a further bend's angle stays as lenient as before

The flange handler reads a `then` bend's `angle` that is no expression
(`true`, a list) as left out and bends it 90 degrees. The rebased
contract had moved that check into the shared reader, so the handler
refused such a call even with the check off.

The reader is back to the handler's behaviour, and `ThenSteps` is the
stricter one, as the schema guide asks: warn reports such an angle and
strict refuses it. Tests cover the reader's leniency, the type's
refusal and the three check levels on one flange.

Part of #2829 (#6581).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 22:01:35 +00:00
tr1pp4 7adbe00377 History in the browser: a History layout that lists each component's history in the browser (#7709) (#7710)
* Browser: the history in the browser, as a History layout (compact mode)

Settings > Interface > History gains "In browser" (view.history_layout dock: browser):
neither timeline is shown, and each component's History folder lists its sketches and
features in history order with the marker. Dragging the marker rolls the history back
through timeline.roll_to; Find in Timeline reveals the feature in the browser.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Browser history: sketches listed under their feature as in the vertical History

With Sketches: Under their feature, the history in the browser (compact mode) lists each
sketch under the first feature built from it, through the shared history_rows (#6494)
without reference rows: same rule, same fold key, so switching the History layout keeps
what is open. A drop above a row rolls back its listed sketches with it. Selecting a feature
lights the rows of its sketches, and selecting a sketch lights the features built from it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Browser: with the history in the browser, the Sketches folder starts closed

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Browser history: sketch rows have the eye of their Sketches folder row

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* History in the browser: Arabic, Hebrew and Vietnamese for the layout's name

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 21:49:21 +00:00
raykholo 8e6a107f6e Lists many PRs add to: no written lengths, one file per theme (#7747) (#7898)
* Lists many PRs add to: no written lengths, one file per theme (#7747)

* xtask lists: the fixed-table allowlist in order, each with its own reason

* Lists: the wide-character blocks and the drawing scale presets as slices too (#7747)

* Lists: the drawing units test reads UNITS as a slice (#7747)
2026-10-28 21:33:34 +00:00