#5187 fixed the frozen Render preview: product frames now set ss_ready
themselves instead of keeping the flag from the last Design frame, so
paint() no longer blits that stale offscreen picture. Nothing tested it.
The new test draws a see-through Design frame (offscreen, for
order-independent transparency) and then an opaque product frame on the
same renderer, and checks the middle pixel shows the product. With the
product branch's ss_ready update removed it fails with the stale red
Design colour, [255, 129, 129, 255].
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The cap pass redraws every back face behind a marked pixel with depth test
Always to put the section plane's depth there, and it also wrote colour.
The last back face drawn painted the cut, so a body behind the cut (one
inside another's hollow, an assembly's inner parts) showed through it in
its own colour and outline, like an X-ray. The pass now writes depth only;
the marking passes have already drawn the nearest back face's colour (the
same split as #4622).
Test: a_body_behind_the_cut_does_not_colour_the_cap in
crates/gpu/tests/capture.rs (a red body in a green box's hollow, 4 mm
behind the cut: the picture is the same with and without it, hatched and
plain, orthographic and perspective). On main 472 pixels differ.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport: lift selected and hovered edge highlights toward the eye
A selected edge's highlight (3 px core, 6 px halo) is a screen-space band that
was depth-tested at the edge's own depth. A face next to the edge seen at a
grazing angle is pushed back by only about a pixel of its slope, so it buried
part of the band, unevenly along the edge: the highlight showed as a thin
wedge instead of a line.
The band is now drawn like a thin cylinder around the edge: its depth is
pulled toward the eye by half its width plus a pixel, measured on screen so
it holds at every zoom. Plain model edges keep their depth (#1434 still
holds); the part of a highlighted edge the model really hides stays dimmed
through hidden_line.
Not yet compiled or tested.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport: lift an edge highlight by how steeply its faces are seen
The first lift (half the band's width plus a pixel, the same on every edge)
was not tied to the faces beside the edge. Each highlight segment now carries
the normals of the two faces it borders (octahedral, packed with its width in
the line's width slot, read as u32 by vs_line): the band is pulled toward the
eye by its half width times how steeply those faces are seen, so a grazing
face no longer buries it, and an edge seen square to its faces is not lifted
at all.
Test: a_selected_edge_on_a_grazing_face_draws_whole (tilts 60 to 88 degrees,
small and large designs, orthographic and perspective; the band 5 mm behind
a face stays hidden). Capturer::rgba_highlighted draws a highlight scene as
the viewport does, for that test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5802
* fix: repaint on a theme change and key the frame cache on the theme tints (#5802)
theme::apply asks for a repaint, so the new visuals are painted on the next pass instead of waiting for another event to schedule one. The gpu frame cache key now includes the theme's hover and selection tints, so a picture cached under the previous theme's colours is not reused.
* test(ui): settle egui's startup repaints before asserting the theme's repaint (#5802)
* test(ui): name the call site that asks for the theme's repaint (#5802)
* test(ui): apply the theme outside a pass so its repaint request stands alone (#5802)
Since #1768 the section's stencil marking draws every face with FACE_BIAS.
Where a back face seen through the cut meets a front face along an edge (a
pocket's wall and its side wall or floor, a fillet and the face it runs
into), the slope push decided which was nearer beside that edge; a front
face winning left those samples unmarked, the cap skipped them, and the
edge, drawn at its own depth, showed through the hatch. In perspective, and
while orbiting in orthographic too, edges popped in and out from frame to
frame.
A second marking pass draws the back faces only (front faces culled, depth
test <=, no depth write), pulled toward the eye as far as FACE_BIAS pushes
faces back, before the cap. The depth buffer keeps FACE_BIAS, so edges on
visible faces still draw whole (#1434).
Tests in crates/gpu/tests/depth.rs: a pocket 2 mm behind the cut, and a
filleted hub with a bore and a cross hole seen from twelve directions, both
depths, orthographic and perspective. On main the pocket shows 45 px of
edges through the cap in perspective and the hub 25 px over the views; with
this change 0 and at most 2.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Performance overlay: frame-time graph and histogram, triangles, draw calls (#2548)
Net change of the perf-overlay branch, rebased onto main as one commit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Document frame_rate_details in ui.prefs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
#5109 added Frame::hover_tint and selection_tint; two test frames that landed alongside it didn't set them, so solidcraft-gpu's tests stopped compiling on main.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Hovering or selecting whole bodies -- a browser row, a History group, a body
under the pointer in body-pick mode -- built a CPU copy of every body's
triangles into the highlight scene. On a 40-body 4.3 MB STEP assembly that was
147 bodies, 70 MB of triangle copies and a 519 ms frame.
The model already has the same geometry on the GPU. The highlight now names it
and the renderer draws it again in the highlight colour:
- bodies drawn from a display plan: the model's evaluated plan chunks, with a
hover/selection tint uniform (the chunks stay resident in the model scene);
- bodies drawn as placements of shared triangles: the same placements of the
model's shared triangles, coloured per instance;
- bodies the model builds on the CPU: their vertex range in the model scene's
block.
See-through and faded bodies keep the CPU feedback, which colours them; faces
and edges highlighted on their own are unchanged. The highlight looks the same
(verified side by side).
On the assembly the highlight build drops from 519 ms to 9 ms and no longer
copies any triangles; selecting the whole assembly takes 9-20 ms.
Co-authored-by: Claude Code <noreply@anthropic.com>
* claim: #4563
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Section Analysis: a Hatch option, off for a plain cut in the body's colour (#4563)
The Section Analysis dialog gets a Hatch check box beside Flip, and
inspect.section a hatch?: bool (default true), so scripts, the CLI and the
control channel reach it too. Hatched, a cut is its body's colour tinted
toward the cap colour with 45 degree stripes, as before; off, it is the
body's own solid colour. The viewport (cap alpha in the uniform), the CPU
rasterizer and ui.render follow it, and the section keeps it when hidden
and shown again or edited.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport: show the picture it drew last when nothing changed (#4820)
A frame redrew the whole scene whenever egui asked for a frame, even when
the camera, scene, highlight and overlays were identical: pointer moves over
empty space and UI animations over a still view paid for the full scene.
The renderer now hashes everything the picture depends on (scene keys,
camera, size, section, images, analysis, accessibility map, occlusion) and
blits the last offscreen picture when the hash matches. The first still
frame filters a supersampled picture down once and later frames copy it as
it is. A frame with the same content costs a blit instead of a scene draw.
Co-Authored-By: Claude Code <noreply@anthropic.com>
* Viewport: draw the scene offscreen, into a 1x window pass (#4820)
The scene keeps the app's depth, stencil and MSAA, but egui's window pass now
has one sample and no depth. Whenever the two targets differ, the scene
(product previews too) is drawn offscreen and blitted, so the UI pass no
longer clears and resolves a multisampled window.
Over 8 s of pointer moves on the 450E rotor head, the app's GPU intervals fell
from 1325 ms to 1006 ms and egui_render from 892 ms to 509 ms; idle stays at
0%. A GPU test checks the split path's picture matches the direct one.
Co-Authored-By: Claude Code <noreply@anthropic.com>
* 3D mouse: a repeated report at rest asks for no frame (#4820)
A device may repeat its latest report while the cap rests. Publishing it
again asked egui for a frame although nothing changed. Only a report that
changes the reading now asks for one; while the cap moves, the view asks for
the next frame itself.
Co-Authored-By: Claude Code <noreply@anthropic.com>
---------
Co-authored-by: Claude Code <noreply@anthropic.com>
* claim: #5230
* Viewport: draw the ground shadow on the direct path (#5230)
The ground shadow went into the model's translucent triangles, so every
frame with a body counted as see-through and took the order-independent
transparency path. Give it its own batch, drawn alpha-blended after the
opaque geometry as before, so only truly see-through bodies use that path.
* Viewport: levels of detail for large meshes (#4724)
A large instanced mesh (20 k triangles or more) gets coarser copies, made
once on a worker (`mesh_lod`): a quarter, a sixteenth and a sixty-fourth of
its triangles, by quadric edge collapse (`geom::simplify`, after Garland and
Heckbert 1997; no fold-overs, no sheets joined, open boundaries kept), each
with its measured deviation from the full mesh. Each frame, as placements
are culled, each is drawn from the coarsest copy whose deviation stays
under 0.75 px where it stands (`placement_scale`, `level_for`). Until the
copies are made the mesh is drawn in full; the scene is built again when
they are. Display only: picking, measuring and exports keep the reference
mesh. Outside the kernel.
25 placements of a 2 M-triangle STL, 3600 x 2190 px, 4x MSAA, M2 Max
(`instanced_scene_gpu_benchmark`): 20.2 -> 1.2 ms a frame with all in
view, 21.9 -> 2.9 ms close up. The copies take 10 s to make, on a worker.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Viewport: see-through and faded parts drawn as instances (#4888)
See-through (an appearance's opacity) and faded (context around an active
component) bodies in one colour are drawn as instances like opaque ones,
their alpha in each placement's colour: one copy of the triangles, levels
of detail and culling, no per-placement copies built on the window thread.
Their placements are ordered back to front each frame (not their
triangles one by one) for devices that sort see-through surfaces.
The GPU benchmark gains `SOLIDCRAFT_BENCH_OPACITY` and the CPU share of
each frame, and its pictures each placement's own triangles too.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Viewport: order-independent transparency for see-through surfaces (#4734)
The model's see-through surfaces (glass, faded context; instanced or not)
were sorted back to front triangle by triangle on the window thread
whenever the view turned. They are now drawn with weighted blended order-
independent transparency (McGuire and Bavoil 2013): when there are any,
the frame is drawn into the renderer's own textures (as supersampling
does), the see-through surfaces gathered into a weighted colour and a
revealage target against the frame's depth, laid over the frame in one
full-screen pass, then the overlays drawn over them. Nothing is sorted.
A device that cannot blend into float targets keeps the sorted way.
25 placements of a 2 M-triangle STL at opacity 0.5, M2 Max, 3600 x 2190 px:
about 10 s a frame sorted, 21.6 ms (17.2 ms instanced, 2.8 ms with levels
of detail).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
`SharedTris::new` used the standard SipHash hasher and collected each
triangle's corners into a Vec: 451 ms for a 2 M-triangle STL on the window
thread. A quick hasher for the coordinates' bits and a fixed array make it
278 ms, and the background mesher that meshes an opened or inserted
file's bodies now welds their large meshes too (`warm_shared_tris`), so the
first scene that shows them takes the shared vertices ready-made.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* claim: #4616
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Viewport: draw a part placed many times from one copy of its triangles (#4616)
A part placed by many occurrences was drawn, framed and picked from a moved
copy of its mesh per placement: on the CPU (the moved mesh and its scene
bytes) and on the GPU (its vertices uploaded once per placement).
- The model scene draws bodies that share a mesh as GPU instances: the
shared triangles once, a rigid move and colour per placement
(`InstancedMesh`, `vs_tri_inst`), in the solid, section and AO passes.
`GpuScene::merged` expands them, so scene tests see world triangles.
- `ModelBody::mesh_in_place`, `plan_mesh_in_place_at`, `mesh_bounds` and
`display_identity` give the shared mesh, its placement, the exact box and
an identity without making the moved copy.
- Display refinement's body ids, Fit/Home bounds, the viewport's body boxes,
the background mesher and picking use them (picking moves the ray into
the part's frame and shares one pick index).
25 placements of a 2 M-triangle STL on an M2 Max: orbit 45 -> 37 ms a
frame, footprint 41 -> 16 GB, 24 copies 39 -> 18 s.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Viewport: draw large meshes from shared, indexed vertices (#4637)
An instanced mesh's vertices are shared between its triangles and drawn
indexed (`SharedTris`). A flat-faceted mesh (an STL's facets) shares them by
position alone and lights each fragment with its triangle's own plane
(`vs_tri_inst_flat`, `fs_*_flat`), taken from the fragment's position
relative to the eye so it stays exact at any zoom; its vertex outputs are
kept few, since a tiled GPU stores every vertex's outputs. A body alone is
drawn this way from 50 k triangles. A mesh too large for one buffer falls
back to unshared vertices.
`instanced_scene_gpu_benchmark` (manual, ignored): 25 placements of a 2 M-
triangle STL at 3600 x 2190 px, 4x MSAA, M2 Max: 21.3 ms a frame for the
placements' own triangles, 16.1 ms shared and indexed.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Viewport: leave out placements of an instanced mesh that are out of view (#4646)
Each frame `Batches::cull` keeps the placements whose box may be seen
(`placed_box_in_view`: all eight corners past one side of the view in clip
space, so it holds behind the eye too) and writes them again only when
that set changes. The manual benchmark gains `SOLIDCRAFT_BENCH_CLOSE=1`:
close up on the middle of 25 placements of a 2 M-triangle STL (13 in
view), 3600 x 2190 px, 4x MSAA, M2 Max: 28.2 ms a frame for the
placements' own triangles, 17.2 ms instanced and culled.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Centralise tool modifiers with classic defaults and preview-safe Ctrl.
Route sketch/selection chords through a shared resolver. Keep Alt snap
suppress and dual toggle as defaults; optional Shift add-only and Ctrl
snap mapping. Skip preview rollback while a manipulator drag is active.
* Address #1616 review: classic snap suppress, single viewport owner, docs.
Default suppress to Ctrl/Cmd or Alt; drop navigation set_suppressed; remove unused label_key; add preview rollback gate test; document sketch modifiers.
* fix(#1616): correct Modifiers primary in tests; simplify rollback fixture.
* Treat Ctrl as primary off macOS, and rustfmt the modifier files.