Commit Graph

2611 Commits

Author SHA1 Message Date
austin62jake ea9ea7bba8 Sketch: a driven dimension nothing fixes any more takes a value again (#10018) (#10023)
* Sketch: a driven dimension nothing fixes any more takes a value again (#10018)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: a driven dimension nothing fixes any more takes a value again (#10018)

A dimension placed while a constraint fixed what it measures goes in
driven, and stayed driven once that constraint was deleted: a
double-click only said it has no value to edit. The double-click now
tries making it driving on a scratch copy; when nothing else fixes it,
the value box opens at the measured value, and Enter makes it driving
(sketch.toggle_driven) at the typed value (parameters.change) in one
undo step. A refused value goes back to a checkpoint, so it stays
driven. While something still fixes it, it stays read-only as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-31 11:53:42 +00:00
sascha2101 07fa5e4f1f Sketch: Project gives its new curves the selected line type (#9945) (#10009)
* claim: #9945

* Sketch: Project gives its new curves the selected line type (#9945)

The sketch palette gives the drawing line type (construction, centerline, infinite) to the
curves a SKETCH › CREATE command reports under `curves`. Project reports what it made per link,
`links[].curves`, so its curves were never found and stayed normal lines whatever the palette
said. `apply_mode` now also reads the links' curves, so a projected line becomes construction,
centerline or infinite and a projected circle construction, in the projection's own undo step.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EMbqRqYimvY26QzcvrojSC

---------

Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 11:40:14 +00:00
HiroKenEz 8f259d5b83 Sketch: the Line tool can switch to a tangent arc and back without changing tool (#9489) (#9553)
* claim: #9489

* Sketch: the Line tool can switch to a tangent arc and back without changing tool (#9489)

With Preferences > Sketch > "Rest on a line's last point to switch to a
tangent arc" on (off by default), leaving the chain's last point and resting
back on it for 0.35 s makes the next click a tangent arc, by the existing
sketch.arc.tangent command, and the same gesture goes back to lines. A label
at the cursor says which. sketch.arc.tangent's end can now name an existing
point, so an outline drawn this way closes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: the cursor label names the command in words (#9489)

The label asked the catalog for a message id that doesn't exist, so it showed
the id. It now takes the command's translated label, and the test checks the
words it paints. Moved clear of the pointer's own badge.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 11:21:59 +00:00
semmelrinde a6b9d5a5b2 Browser: a sketch shown before an Extrude still hides once it is used (#9954) (#9971)
Show/Hide put every sketch it showed in `shown_sketches`, the list of
finished sketches kept shown although a feature uses them. Hiding and
showing a sketch nothing used yet put it on that list, so once an
Extrude used it, it stayed shown instead of hiding itself as a sketch
never hidden does. Show now marks only a sketch a feature already uses;
one nothing uses is shown anyway and leaves the list alone.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 11:19:34 +00:00
Frank 8e53d5050e View corner Cancel: cancel an unfinished tool before the sketch (#6709) (#9584)
* claim: view corner Cancel cancels an unfinished tool first (#6709)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* View corner Cancel: cancel an unfinished tool before the sketch (#6709)

With OK and Cancel in the view's corner on, the cross took the whole sketch
even with a line half drawn. It now takes the steps one Esc takes first (a
drag, Select Other, the tool's points, then the tool) and cancels the sketch
only when nothing is unfinished. Esc and the cross share cancel_unfinished.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 11:12:36 +00:00
Colin Faulkingham 3eb76a8b3b Agent chat: continue after creating or opening a design (#7526) (#9980)
* claim: #7526

* Agent chat: continue across agent-initiated design changes
2026-10-31 11:12:00 +00:00
HiroKenEz 5bb3b6717f Equation curves: the variable can carry its range's unit (#9333) (#9549)
* claim: #9333

* Equation curves: the variable can carry its range's unit (#9333)

A curve can set variable_unit "range" (or tick the new box in its window): the
variable is then a length, so a ^ 2 / (4 * t) is a length when a is one. Start
and end must both be lengths, or one a length and the other a plain number in
the design's unit; anything else is refused. Saved only when set, as one pending
format change; without it curves behave as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 10:54:06 +00:00
kaltenbrunnermarkus 5b6e5815a3 Engine: lower the per-command cost of evaluating large designs (#9615)
* claim: Engine: lower the per-command cost of evaluating large designs

* Engine: lower the per-command cost of evaluating large designs

- The fingerprint texts of features are kept in one store shared by every
  worker, not per worker: a command evaluated ahead runs on a new worker each
  time, where the per-worker store was always empty and every feature was
  written out again. Same texts, same hashes.
- Pinning body names after a command keeps, per feature, the names of the
  bodies it made with the state they were read from, so it no longer searches
  every result's bodies (features x bodies per command), and finds results by
  their index before searching.
- Pinning fingerprints the timeline again only from the first renamed feature
  (or a pattern or mirror of features replaying one) when the model proves its
  fingerprints are the design's; the fingerprints are those of the full pass.
- The evaluation cache's byte count looks bodies and sketches up instead of
  searching them per body (bodies squared per feature). Same counts.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 10:51:16 +00:00
Colin Faulkingham ab665ee3b3 Edit Sketch: open an existing sketch from the ribbon (#9705) (#9829)
* claim: #9705

* Fix Edit Sketch ribbon selection and chooser (#9705)
2026-10-31 10:13:35 +00:00
sascha2101 f0d47e1d26 Preferences: turn the view to isometric when Extrude opens, and back afterwards (#9176) (#9948)
* claim: #9176

* Preferences: turn the view to isometric when Extrude opens, and back afterwards (#9176)

Two new preferences on the Design page, next to "Extrude to a picked target", both off by
default:

- `extrude_view_isometric`: each time Extrude opens, the view turns to the isometric view, so
  the depth can be seen right after a sketch seen face-on.
- `extrude_view_return` (only with the first): when Extrude closes, by OK, Cancel or Esc, the
  view goes back to where it was before it turned, keeping the projection as the end of a sketch
  does (#7038). The check is per frame, so every way the dialog closes is covered.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EMbqRqYimvY26QzcvrojSC

---------

Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 10:13:08 +00:00
Dahak Builds a2365228ab eval_more: one FaceSlice value for the face helpers (#2684) (#9960)
* claim: #2684

* eval_more: one FaceSlice value for the face helpers (#2684)

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-31 09:52:29 +00:00
froglemonade2 e2a7a45c44 MCP: batch and execute take expect {volume, bodies, bbox} and flag a mismatch (refs #3380) (#9904)
* MCP: batch and execute take expect {volume, bodies, bbox} and flag a mismatch (refs #3380)

An optional `expect` argument on the `batch` and `execute` tools: the volume
(with a relative `tol`, default 0.002), body count and bounding box (0.05 mm)
the agent computed before building. Once the call has gone through the server
measures the design as the `measure` tool does and the reply gains
`expectation: {ok, measured, expected, mismatch}`. A mismatch flags the tool
result `isError` with the mismatch text first; the design is kept as built.
A malformed `expect` is refused before anything runs. Without `expect`
nothing changes, and a batch step carrying one is a step with a stray key.

In 29 logged agent sessions every agent computed these numbers beforehand
and then spent a `measure` call plus a comparison by hand after every stage;
one missed a 0.25 mm skin until it compared. Volume and body count are
kernel-independent checks.

Refs #3380

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* MCP expect: filter then map for the bbox coordinates that are off (clippy)

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* MCP: expect's coordinate text helper no longer shares a name with the JSON reader

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
Co-authored-by: bherbruck <tenbee91@gmail.com>
2026-10-31 09:48:08 +00:00
kaltenbrunnermarkus fa21db7df8 Save: hard-link the backup copy and check for unsaved changes once per revision (#9617)
* claim: Save: hard-link the backup copy and check for unsaved changes once per revision

* Save: keep the backup as a hard link and check for unsaved changes once per revision

The backup of a save is the old file under a second name (a hard link renamed over the
old .bak) instead of a copy written out again; where links are refused (FAT, shares,
cloud folders) or the old file cannot be flushed, it is copied as before. Every point a
save can stop at leaves the design file whole and the backup the version before it.

Session::is_dirty compared the whole document with the saved one each time it was asked,
which the window does every frame for every tab. The answer is kept per revision and pair
of documents; the cache holds both, so neither can change in place while it stands, and
doc_mut lets it go first so edits stay in place.

On the rover in two unsaved tabs an idle frame takes 15.0 ms instead of 19.3 ms; a save
with its backup of the 11.8 MB file writes in 9.6 ms instead of 18.9 ms.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:29:20 +00:00
MarkusRe 776dfc9c18 Agent chat: the system note reaches agents beyond the Claude adapter (#9811) (#9818)
* claim: #9811

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Agent chat: the system note reaches agents beyond the Claude adapter

The note only went out as `_meta.systemPrompt.append`, an extension of the
Claude adapter, so Codex and Antigravity never saw it. It now also goes in
the standard ACP `systemPrompt` field for agents that offer it, and in
`_meta.antigravity.systemPrompt.append` for Antigravity.

Fixes #9811

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:16:41 +00:00
N3MI-DG 6b24775413 Extrude: with every body hidden, a new extrude stays New Body instead of turning to Cut (#9919) (#9920)
* claim: #9919

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Extrude: with every body hidden, a new extrude stays New Body instead of turning to Cut (#9919)

Smart Extrude passed the shown bodies as `participants` to keep hidden
ones out (#6901), but with none shown that list was empty, and the
engine reads an empty list as the whole scope: a profile on a hidden
body chose Cut, which has no shown body to change, so nothing was
previewed and OK did nothing. With no body shown it now chooses New
Body.

The operation it latches for a side is also decided again when a body
is shown or hidden while the window is open, as a new start already
does (#467): showing the body an extrude goes into turns it to Cut,
hiding it again back to New Body.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:16:30 +00:00
austin62jake c4f9269409 Report a bug: the window can be dragged by its title (#9916) (#9934)
* Claim #9916

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Report a bug: the window can be dragged by its title (#9916)

The window was pinned at the top middle of the screen (ui_kit::Window
anchor), over the model, in a sketch or not. It now starts there and can
be moved (`placed`), as the file-load card can.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-31 09:16:04 +00:00
froglemonade2 9b31d29443 MCP: server instructions that say how to plan, build and verify (refs #3380) (#9903)
The `initialize` instructions were one paragraph of command shapes. Replace
them with version-neutral guidance: read `skill_reference solidcraft-modeling`
first, plan the numbers, build in a few `batch` calls, the primitive routes
and the fillet-shell-inside-holes order, what follows a parameter, `measure`
after each stage with a coalesced parameter check, and `timeline.edit` /
`parameters.change` / `edit.checkpoint` to fix instead of rebuilding. The
Assistant's system note gets the same pointer; docs/mcp.md says so.

`instructions_name_only_real_tools` now checks the command ids as well as the
tools, and `instructions_recipe_builds_a_parametric_shelled_box` builds a part
the way the instructions describe and checks its volume, axes and parameters.

Refs #3380

Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
2026-10-31 09:09:53 +00:00
froglemonade2 e16647a63f MCP: measure summary and body_topology faces: cylinders for small verification replies (refs #3380) (#9853)
* MCP: measure summary and body_topology faces: cylinders for small verification replies (refs #3380)

`measure {"summary": true}` replies one short object per body (name,
volume_mm3, bbox, faces, closed) with body_count and total.volume_mm3,
as a tool and as a batch step. `body_topology {"faces": "cylinders"}`
replies only the cylindrical faces, the kernel's split halves merged
by radius and axis line into {radius, origin, axis, extent, names},
and no edges. Both defaults are unchanged. The merge uses only what
model.faces and model.edges already reply.

Measured on a 13-feature enclosure, body_topology is 74 KB and measure
1.1 KB per body; agents filter them with scripts, and seven of 29
benchmark runs asked for exactly a cylinders-only listing.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* MCP: keep body_topology's cylinder merge next to check_parameters' without a name clash

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
Co-authored-by: bherbruck <tenbee91@gmail.com>
2026-10-31 08:56:37 +00:00
Wenyao Ma 5281734a22 UI: add theme-aware button hover and press feedback (#4984) (#5331)
* fix(ui): add theme-aware button interaction feedback (#4984)

* fix(ui): preserve footer button identity in overlapping dialogs

* fix(ui): preserve native button widths in toast actions
2026-10-31 08:32:45 +00:00
austin62jake b5fe8776b5 Assembly: default names skip names in use (part of #9738) (#9898)
* Claim part of #9738

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Assembly: default names skip names in use (part of #9738)

Contact sets, motion studies and exploded views were named by how many
there were, and a component's placements by how many it had, so after a
delete the next default name repeated one still in use, and commands
given that name acted on the first. They now take the first number no
item has, as joints' and the app's dialogs' default names already do; a
placement keeps the next number when it is free.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-31 08:28:50 +00:00
Dahak Builds 8986a670e5 3-Point Circle keeps snapped clicks as coincident constraints (#9858) (#9922)
* claim: #9858

* 3-Point Circle keeps snapped clicks as coincident constraints (#9858)

The tool sent only the three clicked positions, so a click snapped to a
point or curve left no constraint and the circle was free once drawn.
Each click now goes as its snap, as the 3-Point Arc's do, and the engine
adds a PointOnCurve for each referenced point, as the centre circle's
through click does (#3099).

* Fix #9858 test: assert the clicked midpoint point, not the line end

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-31 08:27:13 +00:00
froglemonade2 c528964363 MCP: check_parameters tries parameter values and puts the design back (refs #3380) (#9910)
A new tool that checkpoints the design, sets every value in one
parameters.change, reports measure, errors and cylinder axes, and
restores the checkpoint, so the loop set_parameter / measure /
body_topology / set back costs one call and one rebuild.

Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
2026-10-31 08:24:41 +00:00
austin62jake 3c0d4e120e Linked designs: one changed while the assembly was closed is read again when it opens (#9739) (#9872)
* Claim #9739

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Linked designs: one changed while the assembly was closed is read when it opens (#9739)

A link now keeps the SHA-256 of its design file's bytes as the assembly
last read them (DesignLink::file_sha256, a pending format change), set by
Insert Design, Relink, Extract to File and Update Links. component.links
reports `changed` from it, hashing a file again only when its time or
size changed (vfs::design_path_stamp, behind the design-path rule). The
app treats a link it meets for the first time whose file changed as not
read yet, so opening an assembly, in its own tab or in place of the blank
design, reads those parts again as a tab coming back does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Linked designs: read what changed last when a design opens in place of the blank one (#9739)

A read is taken up only by the design revision it started from, and
adopt bumped the revision after starting it, so the read was dropped.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-31 07:28:24 +00:00
momysnow da23eb1377 Sketch dialog follows "Dialog buttons at top" (#9860) (#9884)
* claim: #9860

Co-Authored-By: Claude <noreply@anthropic.com>

* Sketch panel follows Dialog buttons at top (#9860)

The Sketch panel drew Finish Sketch, Look at and Slice in a footer under
its options even with Preferences > Interface > Dialog buttons set to
Top. Panel::palette now reads the same published preference as the
feature cards and draws its footer row under the header, above the
options, when it is Top. With the preference off nothing changes.

Changes a default: no

Co-Authored-By: Claude <noreply@anthropic.com>

* Docs: Dialog buttons at top also moves the Sketch panel's Finish row (#9860)

Co-Authored-By: Claude <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-31 06:23:41 +00:00
austin62jake 5d9e4d5f95 joint.drive: a suppressed joint stores nothing, and the reply says what was asked and why a value differs (#9742) (#9862)
* claim: #9742

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

* joint.drive: a suppressed joint stores nothing; the reply says what was asked and why a value differs (#9742)

Driving a suppressed joint answered moved: false with "H is suppressed"
but wrote the values into the joint, with an undo step, so the part
jumped when the joint was unsuppressed. A suppressed joint outside any
motion link now stores nothing.

The reply gains `requested` (the values asked for, before limits and
links) and `held`: each driven value that ended up elsewhere, with why
(a motion link sets it, as a screw's travel follows its turn; a limit;
contact; a closed loop). A drive that moves nothing gives the first held
value's why as `reason`, so driving a screw's distance alone no longer
answers moved: false without one.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-31 05:57:24 +00:00
Dahak Builds 75b3fb678c Sketch: conflict messages no longer name a nonexistent id or claim full constraint wrongly (#9735) (#9859)
* claim: #9735

* Sketch: conflict messages name real constraints, not the refused one's id or a false 'fully constrained' (#9735)

* fmt + clippy: contains over iter().any (#9735)

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-31 05:56:42 +00:00
austin62jake affe37bcc3 Body names: inspect.interference refuses an unknown body; appearance.chain and appearance.list take a placed copy's name (#9740) (#9856)
* claim: #9740

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

* Body names: inspect.interference refuses an unknown body; appearance reads take a placed copy's name (#9740)

inspect.interference dropped a name that is no body, so a misspelled or
wrongly cased name left that body unchecked and two overlapping cubes
answered count 0. It now refuses the name, as inspect.clearance does,
naming the closest body when one is near enough to be a typo or another
case (cmd::no_body, on the existing edit_distance).

appearance.chain, appearance.list and appearance.replace's scope take a
placed copy's name (KB (K:2)) and a placement's (K:2) for the body and
component they show, as appearance.assign already does, through two
Session helpers: own_body_name (on body_frames) and component_or_placement,
which appearance.assign now uses too. A name that is neither is still
refused. select.set already refuses an unknown body on main (#9737).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-31 05:07:04 +00:00
PeppaWutz 9d8ab72da7 Ribbon tooltips: help for every remaining toolbar command (#9060) (#9868)
The last 106 commands on the backlog get the two-sentence help under
their tooltip, in English, German, Japanese, Chinese, Arabic, Hebrew and
Vietnamese: Surface, Sheet Metal, Plastic, Inspect, Construct,
Configure, Parameters, Library, View and the few single ones (Bill of
Materials, Frame Member, Pattern on Path, Convert Mesh, checkpoints).

With that the backlog is empty, so it goes: the test is now
every_toolbar_command_has_help, and the docs that mentioned the backlog
say so. The help tests use sketch.drag, which is not on the ribbon, as
the command without help.
2026-10-31 05:04:31 +00:00
Nathan Dane 160662ffec Tab colours: per-tab surfaces and fade (#8876) (#9808)
* claim: #8876

* Resolve theme tab surfaces with cached Oklab transitions

* Apply tab surfaces to unauthored Render preview backgrounds

* Allow quantized endpoint colours late in cubic Render fades

* Keep tab surface publication from restyling ordinary widgets
2026-10-31 04:39:12 +00:00
PaddleStroke fd5d0e6738 Assemblies: mass, centre of mass and inertia per occurrence and rigid group (#9715) (#9717)
* claim: #9715

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Assemblies: mass, centre of mass and inertia per occurrence and rigid group (#9715)

assembly.mass_properties (and Session::mass_properties) gives, for every
occurrence and every rigidly-joined group, mass (kg), centre of mass (mm) and
the inertia tensor about it in world and frame axes (kg mm2), the input
the multibody dynamics work needs. Bodies are measured as Properties
measures them (kernel volume and centre, mesh gyration), once per body,
then moved by each placement and combined by the parallel-axis theorem.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 04:35:29 +00:00
PaddleStroke 0067dcab28 Settings: edit an added AI agent (#9619) (#9653)
* claim: #9619

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Settings: edit an added AI agent (#9619)

Agents you added in Preferences > AI get an Edit button between Test and
Remove. It reopens the Add agent dialog filled with the agent's name and
command, or its protocol, preset, endpoint, model and request timeout, and
Save changes the entry in place: same id, permission override and
always-allowed tools. The stored key is never read back into the dialog;
an empty key field keeps it (still only sent to HTTPS or this computer),
a new key replaces it. The control channel gets `edit_dialog`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 04:33:18 +00:00
PaddleStroke c2f66107cf Sketch: paste copied sketch geometry into another design (#9258) (#9675)
* claim: #9258

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: paste sketch geometry copied in another design (#9258)

Sketch geometry copied or cut in a sketch (sketch.copy / sketch.cut) now pastes into a sketch of another open design with Ctrl+V or the context menu, at the cursor or at the copied coordinates, with the constraints and dimensions among it. A dimension whose expression names the copied design's parameters keeps its value, in its unit; a text keeps its numbers. SketchClip::for_another_design prepares the clipboard; the app keeps the last sketch copy beside the cross-design body/component copy.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 04:11:57 +00:00
Dahak Builds 91aefd5abc Refuse sketch values that collapse a curve in settle_value_edit (#9729) (#9837)
* claim: #9729

* Refuse value edits that collapse a sketch curve: settle_value_edit runs settle's shrunk/flung checks (#9729)

* rustfmt

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-31 04:08:20 +00:00
PaddleStroke f1c2fc8804 Assistant: a new tab keeps the agent's sign-in (#9293) (#9669)
* claim: #9293

* Assistant: a sign-in confirmed in one tab holds in every tab (#9293)

The latest sign-in evidence per agent is window state: keep it across
tab switches, new tabs and replaced designs instead of resetting it with
the tab's conversation, so a new tab no longer marks the agent as signed
out when discovery's login probe is older than the chat's proof.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 04:01:52 +00:00
Nathan Dane d7cba9e96d Preferences: theme options list and the opacity option (#8876) (#9807)
* claim: #8876

* claim: #8876

* Theme options: persist per-theme values and expose preferences contracts

* Restore selected theme mode after stopping a followed theme

* claim: #8876

* Preferences: render theme options and apply readable panel opacity

* Use floating-point scale expectation in theme preferences scenario

* Keep panel opacity colour construction inside theme tokens

* Complete theme options translations in Arabic Hebrew and Vietnamese

* Let standalone theme sliders fill their option cells
2026-10-31 04:01:29 +00:00
PeppaWutz 849bb392d2 Ribbon tooltips: help for the Sketch tools (#9060) (#9847)
* claim: #9060

* Ribbon tooltips: help for the Sketch tools (#9060)

84 sketch commands get the two-sentence help under their tooltip, in
English, German, Japanese, Chinese, Arabic, Hebrew and Vietnamese, and
leave the backlog: every Create tool (lines, rectangles, circles, arcs,
slots, polygons, splines, conic, ellipse, text, points, the 3D sketch
tools, Project, Intersect and the other reference tools), every Modify
tool (Trim, Extend, Break, Offset, Fillet, the chamfers, Move, Scale,
Transform, Blend Curve), the patterns and Mirror, every constraint,
AutoConstrain, Sketch Dimension, Create/Edit/Finish/Cancel Sketch and
copy, cut and paste. The help tests use inspect.zebra as the
undocumented example, since sketch.trim has help now.
2026-10-31 04:01:09 +00:00
thocsmith 3b77567932 Docs: joint flip needs x for point origins; checkpoints are single use, 16 kept (#9746) (#9844)
joint.create's flip text and the assemblies guide said two origins at one
point with the same z stay as they are; a point origin without x takes its
x from z, so a part turned about z turns back. Say so, and point to giving
x on both origins or joint.as_built.

edit.checkpoint and edit.restore_checkpoint now say that restoring or
forgetting uses the checkpoint (and later ones) up and that only the last
16 are kept, and the "no checkpoint N" error says why. The editing and
mechanisms skills no longer read as if a checkpoint can be restored twice.

Co-authored-by: thocsmith <193096300+thocsmith@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 03:48:13 +00:00
Homero Thompson 810a9558bd perf(#3892): index the hidden joints and folders of the view (#9823)
The browser asks about every joint of the design on every frame, and
the answer walked the list of hidden joints: a nested STEP assembly
hides thousands of them, so a frame cost grew with the size of the
design.

Session keeps the hidden joints and folders as sets and answers from
them. The sets are built when the view changes and kept until it
changes again: the revision says the design changed, and the lists
say the view changed under it (the view is replaced outside the
engine too, without a revision of its own).

The behaviour is unchanged: the hidden joint stays hidden, the shown
one stays shown, and undo and redo keep the hiding right.
2026-10-31 03:01:33 +00:00
PaddleStroke d7ae568790 Insert SVG: say why a drawing has nothing to import (#9641) (#9652)
* claim: #9641

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Insert SVG: say why a drawing has nothing to import, and read UTF-16 files (#9641)

An SVG with nothing SolidCraft draws (only an embedded picture, shapes
pulled from another file with <use>, or not an SVG at all) was refused with
"invalid parameters for sketch.insert_svg: the drawing has no geometry
SolidCraft reads". It now names the file and says why, pointing pictures at
Insert Canvas and Canvas to Sketch. SVG files with a byte-order mark or in
UTF-16 now read, and a gzip-compressed (.svgz) file is refused clearly.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Insert SVG: decode UTF-16 with as_chunks (clippy)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 03:00:32 +00:00
PaddleStroke 43a549d967 Render: start the GPU path tracer setup only when the GPU image method is chosen (#9041) (#9668)
* claim: #9041

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Render: start the GPU path tracer setup only when the GPU image method is chosen (#9041)

Entering the Render workspace started the GPU path tracer setup even with
the default Raster image method. The setup compiles the path shader, which
some Vulkan drivers (Mesa RADV/ANV, NVIDIA) take gigabytes over: the memory
climb reported while orbiting in Render. The setup now starts only while
Render is open with the GPU path method.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 02:59:05 +00:00
Dahak Builds 7228e218bf Preferences: unapplied changes no longer reach the settings file (#9730) (#9831)
* claim: #9730

* Preferences: unapplied changes no longer reach the settings file while the dialog is open (#9730)

* Preferences: hold unapplied changes out of the settings file while the dialog is open

While prefs_window.snapshot is set, SolveApp::prefs() writes the snapshot's
values - the ones Cancel restores - so the periodic autosave, quit, window
close, web save and control channel can no longer persist a change that was
never applied. Apply re-baselines the snapshot; settings the dialog cannot
change keep saving live. Adds regression tests and updates the tests that
pinned the old behavior.

Fixes #9730

* prefs: bind the snapshot's shadow outside json! so the ui-containers guard reads it

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-31 02:58:02 +00:00
momysnow 60b9e9d188 Edit Joint: show the two sides and pick them again (#9686) (#9692)
* claim: #9686

Co-Authored-By: Claude <noreply@anthropic.com>

* Edit Joint: joint.edit takes the two sides

joint.edit accepts a and b in the form joint.create takes them (read by the same origin_param), so a joint can move its attachment without being deleted. A side left out keeps its place. The two sides must stay on different occurrences, checked as joint.create does. Limits, values, expressions and the name are kept; a relation's values start again where its parts are.

joint.edit gets an input contract and reply type (schema/joints.rs), and leaves schema/unconverted.txt.

Co-Authored-By: Claude <noreply@anthropic.com>

* Edit Joint shows both sides and picks them again

The Edit Joint dialog now shows the two sides in the same selection inputs as Joint, each pre-filled with the face or edge of its own component under the origin. OK sends joint.edit a or b only for a side picked again, so an untouched side keeps its origin exactly.

Co-Authored-By: Claude <noreply@anthropic.com>

* Edit Joint: a moved side turns the part as joint.create would

joint.edit kept the joint's old angle when a side changed, so the part could turn by a half turn about its axis when the new origin's x lay the other way. When a side moves and no angle is given, the angle is worked out again as joint.create does (the least turn from where the part is now); a relation's angle is its tilt and stays.

The mechanisms reference says joint.edit takes a and b.

Co-Authored-By: Claude <noreply@anthropic.com>

* Edit Joint: pre-fill sides by name, send the angle only when changed

A side shows the face or edge its snap names, the piece nearest its stored pick when the name has several, else the one nearest that pick; it no longer searches outward from the frame origin, which could show the plate beside a hole for the hole's wall. A point or frame side shows nothing. OK sends the angle only when the user changed it, so a side moved without it turns the part as joint.create would.

Co-Authored-By: Claude <noreply@anthropic.com>

* Edit Joint: a moved side leaves an angle expression alone (#9686)

Co-Authored-By: Claude <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-31 02:27:54 +00:00
Nathan Dane ca005237a1 Theme files: options, overlays and requires (#8876) (#9805)
* claim: #8876

* Theme files: add options, overlays and requirements
2026-10-31 02:25:34 +00:00
Colin Faulkingham 213e05da5f Shortcuts: normalize and validate text bindings (#9733) (#9800)
* claim: #9733

* Fix text shortcut normalization and current bindings (#9733)
2026-10-31 02:25:15 +00:00
PaddleStroke 72a265e4fc Nightly action matrix: a sketch on the sensor enclosure lid's top keeps its attachment (#9465) (#9670)
* claim: #9465

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Face attachments: a piece of a face its certificate finds the other pieces of keeps that certificate (#9465)

The nightly action matrix has refused a sketch and an offset plane on the
sensor enclosure lid's underside (`examples/sensor_enclosure :: Lid/F2:top`)
since #8278. The lid's lip, joined below it, parts the underside into a ring
and a panel; the ring rests on the case and is named after the case's top,
so the lid's cap certificate (via certified_pieces) finds only the panel.
#8278 then refused the certificate because it doesn't find the picked face,
and the history-name fallback can't take a name made by another body's
feature.

A face that is no pattern or mirror copy and lies on the same oriented plane
as the pieces the certificate finds is another piece of that face: the
certificate stands for it, as before #8278. Copies (the #8278 case) still
fall back to their own history name.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 02:02:24 +00:00
PaddleStroke 3877ef08b9 Measure: drag the labels away from the part (#8510) (#9395)
* claim: #8510

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Measure: drag the labels away from the part (#8510)

The distance and X/Y/Z labels in the view follow a drag of the pointer and keep
a leader to what they measure; a double-click or a new measurement puts them
back. A press on a label picks nothing, starts no box selection and opens no
Select Other.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 02:00:23 +00:00
PaddleStroke cce337f83f Sketch: alignment guides from any hovered point while drawing (#9105) (#9673)
* claim: #9105

* Sketch: alignment guides from any hovered point while drawing (#9105)

While a drawing tool waits for a point, hovering a line or arc end, a
rectangle corner or a free point wakes the same temporary horizontal/
vertical tracking guide as a circle centre or line midpoint. Idle
hovering keeps centres and midpoints only. Preference
sketch_tracking_points (on) turns it off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 02:00:07 +00:00
PaddleStroke 5304294107 Browser: a Joints folder under each component lists the joints that attach it (#9130) (#9404)
* claim: #9130

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Browser: a Joints folder under each placement lists the joints that attach it (#9130)

Each component placement in the Browser gets a Joints folder (closed at
first) listing the joints whose Component 1 or Component 2 is that
placement, each beside the placement it joins it to. The rows are the
root folder's joints: click picks, the eye hides the glyph, double-click
edits and the menu is the joint's menu. The root Joints folder is
unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 01:59:53 +00:00
PaddleStroke 9d18034e13 Sketch drag: a line is never shrunk to a point to follow the cursor (#9062) (#9728)
* claim: #9062

* Sketch drag: a line is never shrunk to a point to follow the cursor (#9062)

A line's end on a horizontal construction line through the origin, dragged
up off it, made the construction line vanish. A horizontal row is
b.y - a.y, which a line a hair long meets at any tilt, so the drag's held
solves met the point-on-line by shrinking the construction line: to 1e-5 mm
on the first frame, 1e-7 mm by the tenth, and the end went up.

A drag step (held solve, the tangent-ends-held solve, and each cursor
correction pose) that shrinks a line or circle from over 1e-3 to under
1e-4 now counts as failed, as a step that wraps an arc does. The end then
stays on the construction line, which keeps its length.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 01:54:19 +00:00
PaddleStroke d61ec60480 Assistant: say when an installed agent can't start, and how to reinstall it (#9034) (#9655)
* claim: #9034

* Assistant: say when an installed agent can't start, and how to reinstall it (#9034)

An agent whose program is found but fails its `--version` check without
printing a version (npm's opencode.exe left as a placeholder when the
package's setup script did not run, which Windows refuses with "not
compatible with the version of Windows you're running") was listed like
a working one, and connecting only said "The agent stopped." with the
system's message.

Discovery now keeps why the program did not start: the spawn error
(Windows' `%1` replaced with the program) or, through a `.cmd` shim, the
first stderr line or the exit status. A probe that times out still says
nothing. The picker shows "Installed, but it does not start: ...", and
connecting first explains it with the agent's install command and Refresh.
The control channel status carries `problem`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 01:52:59 +00:00