Commit Graph

11 Commits

Author SHA1 Message Date
CamWight 866029aaa2 Engine: one sketch store for the sketch commands (W38.0, #5425) (#6336)
* Engine: one sketch store for the sketch commands (W38.0, #5425, no behaviour change)

The sketch commands found and kept the sketch they work on in about forty places, each its own
way. They now go through one module, cmd::sketch_store, so a drawing session (W38a/b) can put
sheet and view sketches behind the same calls without the commands changing again.

- target: the command's `sketch` param or the sketch being edited (target_sketch, moved).
- active: the sketch being edited, if any. The thirteen commands that need one keep their own
  refusal text; unifying the three texts is a separate, visible change.
- read and write: the only calls from the sketch commands to Document::sketch and sketch_mut.
- update: change a sketch on a copy of the document and keep both, the edit the text and link
  commands made by hand (sketch.text, sketch.edit_text, the projection, intersection and
  include links, sketch.fit_curves_to_section, sketch.break_link). As before, those paths
  neither solve the sketch nor run its checks.
- checked: the checks an edited sketch passes (the periodic splines), shared by edit_solved and
  sketch.offset.break.

edit and edit_solved stay in sketch.rs and load and keep their sketch through read and write.
Imported text, snap points and the face projections keep their own shape (a text that can't be
linked is skipped, snap points copy the document only when one is needed) through read and
write. The reads and writes that are about the design's own sketches stay as they are, each on
a line marked `// design-only:` (Redefine Sketch Plane, a joint's curve, a motion trace's wire,
and the session's live drag, parameter edits and `created` diff).

A source scan, each_sketch_command_goes_through_the_store, fails when a command reads or writes
a sketch, or asks for the active one, anywhere but the store or a marked design-only line in the
files that work on the design's sketches. Every existing sketch test is unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Engine: the sketch store's scan also catches the active sketch taken as a value (#5425, review of #6336)

The scan only caught `active_sketch.ok_or`, so main's `let Some(id) = s.active_sketch else …`
could have come back unseen (0xlillith's review). It now also flags the value-read forms:
`) = s.active_sketch` (let-else and if let), `=> s.active_sketch` (a match arm),
`s.active_sketch.and_then(` and `s.active_sketch.map(`. State checks (`is_some`, `is_none`,
`== Some(`), assignments and snapshot copies stay allowed.

The wider scan found five commands that hand-rolled the store's `target` rule (a `sketch` param or
the sketch being edited). They now call `sketch_store::target`: sketch.inspect, sketch.glyphs,
sketch.export_dxf, inspect.curvature_comb and inspect.minimum_radius (their `curves` form).
Their refusals become target's:
- no `sketch` and none being edited: "no sketch is being edited" (was "no such sketch (and none
  is active)", or "no such sketch" for sketch.glyphs);
- an unknown name or id: "no sketch `X`" (an unknown id used to reach "that sketch is not
  evaluated");
- a feature that is not a sketch: "`X` is not a sketch";
- a `sketch` that is neither an id nor a name (true, a list, an object): refused,
  where it used to fall back to the sketch being edited. A null `sketch` still means none given
  (the scenario harness sends one): target now reads it that way for every sketch command
  (target_reads_a_null_sketch_as_none_given).
No test, doc or schema text named the old wording; the params docs ("sketch?: id|name (default
active)") still hold.

The two remaining value reads, the default sketch for a feature (features.rs) and the sketch a
measurement prefers (measure_sel.rs), go through `sketch_store::active`, with no change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Engine: a number in `sketch` is an exact sketch id, never a name (#5425, review of #6336)

`sketch_store::target` turned a JSON number into text and looked it up with
`Document::find_feature`, which falls back to a name when no feature has that id. So
`{"sketch": 999999}` could pick a sketch named "999999" whose id is something else, and export
or inspect it. sketch.export_dxf, sketch.glyphs and the two curvature inspects read an exact id
before they moved onto the store; the other sketch commands (the old `target_sketch`) and
sketch.inspect read a number as text.

One rule now, for every command that takes `sketch`: a number is an exact id (`as_u64`, then
the feature with that id); text is an id written out or a name, as before. A number that isn't
a whole number of 0 or more (negative, fractional) is refused with "`sketch` must be an id or a
name"; an id no feature has gives "no sketch `N`", as before. Nothing in the tests, docs,
scenarios or examples names a sketch with digits, so nothing relied on the old fallback.

Test (sketch_store): a sketch named "999999" with another id. sketch.export_dxf, sketch.glyphs
(with another sketch being edited, for its enabled check), inspect.curvature_comb and
inspect.minimum_radius (with a real curve id) refuse `{"sketch": 999999}`, find the sketch as
`"999999"` and by its own id, and refuse -1 and 1.5.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Engine: MidPoint finds its sketch through the store too (#5425, after #5011)

#5011 added a caller of the old `target_sketch` (MidPoint's `line_stays`, which swaps a point
picked after its line) after this branch's base. It now reads the sketch through
`sketch_store::target` and `sketch_store::read`, as the other sketch commands do, so a number
there is an exact id too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Engine: standard parts fix their sketch's entities through the store (#5425, after #6376)

#6376 (a standard part's sketches are fully defined) reads the sketch being drawn straight from
the document's features, after this branch's base. `fix_all` now takes it from
`sketch_store::active` and `sketch_store::read`, as the store's scan requires, with the same
result.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Engine: Toggle Diameter and Delete on a profile find their sketch through the store (#5425)

Two sketch commands landed on main after the store: sketch.toggle_diameter (#7729) still
called the removed sketch::target_sketch, and Delete on a picked profile (#7107) read the
sketch straight from the document. Both now go through sketch_store (target and read), and
the store's source scan passes again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch dimensioned: use the sketch store's target after the rebase

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch dimensioned: read the sketch through the store

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-28 20:56:05 +00:00
Homero Thompson f103468dba Params: a list parameter refuses a wrong type instead of losing entries (#6651) (#6683)
* claim: #6651

* test(#6651): a list parameter of the wrong type is refused

A list parameter such as a cut's `targets` or an export's `bodies` loses entries without an error: a value of the wrong type reads as an empty list, which most commands take to mean "every body". The regression test drives the engine the way a user does: two bodies, a box cut that crosses both and is meant for one of them, and a `targets` of the wrong type. The command must refuse it and leave the design as it was.

* fix(#6651): a list parameter refuses a wrong type instead of losing entries

A list parameter of the wrong type was read as an empty list, and an empty
list means "every body" to most commands: a cut meant for one body cut every
body it touched and the command reported success.

A wrong type is now an error that names the parameter, the offending entry
index and the value it got. A list longer than 10000 entries is an error
instead of being cut short. `null` stays absent, as the schema contract says,
and a plain string is still a list of one. The 80 call sites now propagate the
error instead of losing entries; the commands that take feature keys, which
may be named or numbered, read them with their own reader.
2026-10-28 16:25:53 +00:00
dudedagger42 531fc04db8 Inspect: center of mass measures the world state, as Measure does (#5246) (#5268)
* Inspect: center of mass measures the world state, as Measure does (#5246)

inspect.center_of_mass read the model state, so in an assembly a moved
occurrence was measured where its bodies were made, a second placement
was left out, and a placed copy's world name was "no such bodies". It
now reads the world state, as inspect.measure does, and agrees with
component.properties' mass centre at uniform density.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Center of mass test: unground the placed part before moving it

Upstream now grounds a design's first part when it is made.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 12:04:53 +00:00
JIJINBEI fe3b14e798 refactor: Aabb2 and point-built Aabb3 for every hand-rolled box (#2428)
* Iterate instead of indexing in nine loops

Replace index loops that look up neighbours by position with enumerate,
zip(cycle().skip(1)) for wrap-around pairs and zip(skip(1)) for
consecutive pairs. No behaviour change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: ring_edges for the edges of a closed ring

Every walk over a polygon's edges, the last back to the first, spelled
x.iter().zip(x.iter().cycle().skip(1)); eighteen of them now call
geom::ring_edges. Three redundant take(len) calls go with them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Ring, a closed ring that knows it is closed

A Ring holds items in order around a closed polygon, loop or fan; edges()
walks each with the next and the last with the first, corners() each
with both neighbours. Ring<Vec2> has signed_area and even-odd contains.

Loop2::polyline returns a Ring, as do doc's face_loops and
boundary_loops, kernel's coplanar wire samples, CapLoop's segments,
tess pieces' rings, the gizmo's plane quads and the navigation cube's
facets. Their walks take edges() or corners() instead of wrapping an
index; sketch's text-hole test and doc's poly_area become contains and
signed_area. Loop2::joints pairs each segment with the next.

Replaces the ring_edges free function.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Chain, Ring and Path; bounds for a chain of points

Ring becomes Chain<T, Closed> beside Path = Chain<T, Open>: edges()
closes a ring and stops at a path's end, Path::close makes the ring,
and bounds() (the empty box for no points) serves both. Eight
hand-rolled min/max folds over a loop's polyline call bounds(); doc's
flat_polyline returns a Ring.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: area and inside on Ring for any planar point

Ring's signed_area and contains take any Planar point (Vec2 or
[f64; 2]). The cam profile in joints_cam is a Ring: its own even-odd
test goes, and its edge walks, gap and area take edges(). face_params'
loop area, the text path's winding, tess pieces' ring area and the
copies in three tests call signed_area or contains; the formulas are
the same term for term.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: sheet's closed outlines go through Ring

dedup takes and returns a Ring (dropping a last point back on the first
is what makes it a ring's), near_outline walks a Ring's edges, and the
copy of it beside fold checks calls it. point_in goes: its callers ask
the Ring. Its formula anchored each crossing on the other end of the
edge, so the two can differ only for a point on an edge to the last
digit; one caller sets such points aside first, the others test a
region's interior point, a cut's midpoint or another outline's corners.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: cam tests build their outlines with Ring::from

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: area_vector on Ring<Vec3>; three Newell sums use it

Ring<Vec3>::area_vector is half the sum of a × b round the ring. heal's
loop_area, lip's outer-loop turning and the revolve's loop orientation
summed it by hand with a wrapped index; they take it from the Ring
(the half is exact, and two of them only read its sign).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb3 from points; boxes built and asked through it

Aabb3 collects from points (skipping non-finite ones, as add does) and
gains inflated, contains and meets. Fifteen hand-rolled min/max folds
over points or boxes in kernel, doc and engine become collect or union,
and their "within tol of the box" tests become inflated(tol).contains.
blend's refused-edge boxes and naming's face index hold an Aabb3.

A NaN point is now outside every box, where the old negated
comparisons let it in; an infinite point no longer stretches a box.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb2, the plane's box; 2D folds and box tuples use it

Aabb2 mirrors Aabb3 (collect, add, union, inflated, contains, meets)
and adds relative, a point's place in the box. sketch's link and
link_loops each had that formula; link_loops' boundaries, prism's
segment and loop boxes, profiles' shape boxes and grid, and ends'
segment box hold an Aabb2 instead of a (low, high) pair. Folds in the
cam, sketch bounds, sheet's perforation grid and the sketch clipboard
collect one.

Boxes are built from the same terms (a round's box keeps c - r - tol).
As with Aabb3, a NaN point is outside every box and an infinite point
no longer stretches one.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* kernel: prism's segment boxes are plain Aabb2s

The SegBox alias named a (low, high) pair; Aabb2 says it itself.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Chain::bounds is an Aabb2; the boxes #2382 left as pairs follow

Chain::bounds returns an Aabb2. Its callers keep it: sheet's hole and
cut boxes (loop_box), letter boxes, island outlines and line-near-cut
test use meets, contains and inflated; profile's outline overlap and
max_clearance, profiles' box tests and the cam test read its corners.
flat_size and the flat pattern's JSON size are the union of the loops'
boxes (0 × 0 for no loop, where the pair fold gave -∞).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb3::intersection; hand-grown and hand-met boxes use the box

Aabb3::intersection is the box both hold. ops' four overlap boxes of a
boolean's operands take it, and seven boxes grown by hand (ops' body
boxes, the distance set's bounds, coplanar's face box, eval_more's
padded mesh box, compare's group and region boxes) call inflated with
the same amount on every side.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 03:44:49 +00:00
Irakli Kourtis 0a66697da8 Continuity Analysis tool, legend and theme colours on #1642's inspect.continuity; curvature combs on faces (#770) (#1247)
Thanks @jyviko.
2026-10-17 08:38:55 -04:00
bherbruck 296683229d Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)
* WIP deep rename (not for push)

* WIP2

* WIP3

* WIP4 wxs fix

* rustfmt

* Rename the remaining identifiers in merged crash-report code

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 17:17:01 -04:00
bherbruck d10312b7fd Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs
The old ids live only in crates/engine/src/legacy_ids.rs (the legacy migration table): find_command maps them, so old scripts, recipes and control calls keep working, and saved shortcuts, recent and pinned commands are migrated on load (designs store no command ids). Parity maps the observed catalog ids to ours through xtask/data/fusion-ids.tsv. The agent rule now reads: our own dotted id, never another product's. Cargo.toml's repository points at github.com/bherbruck/solvecraft.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-09 12:17:23 +00:00
bherbruck 4126ae5a75 Clippy: assign operators in the path sweep, isocurve grid and centre of mass
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:42:34 +00:00
bherbruck 319386760f Isocurve Analysis (FusionIsoCurveAnalysisCommand): a grid of isoparametric curves each way across picked faces (the face cut by evenly spaced planes of each family), drawn while the tool is active
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:42:34 +00:00
bherbruck 561df89b1d Minimum Radius Analysis (sketch curves exactly, edges, faces from the mesh normals; every face when nothing is picked) and Center of Mass (all bodies or picked ones, uniform density) in the sketch INSPECT panel, with markers and labels in the viewport and their own icons
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:42:34 +00:00
bherbruck 4c64ceed5c Curvature Comb Analysis (FusionCurvatureCombAnalysisCommand): combs on sketch curves (exact, from their Bézier/conic pieces) and model edges, with minimum radius; interactive tool draws teeth and envelope; ignored large-sketch timing test (sketch_perf)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 04:40:33 +00:00