* Render appearance: click, drag and paint to assign, Pick Up, copy and paste, and Remove
* Exclude the workspace Shots strip from dialog width checks
* Exclude the collapsed Shots control from dialog width checks
* Retain assembly cache listings and measure actual dialog bounds
* fix: handle toast button rectangles in assignment status
* fix: restrict gallery note measurement helper to tests
* test: measure assignment help at the catalogue footer
* fix: share the command revision snapshot after restacking
* claim: #7445
* Color picker: add shared Hex input mode (#7445)
Accept strict RGB/RGBA Hex input while preserving exact opacity,
opaque/PBR restrictions, invalid drafts and existing U8/F behavior.
Keep explicit English fallback entries for the three new Hex messages
in Arabic and Hebrew, which final integration main now requires as
complete catalogs. No Arabic or Hebrew translations are claimed.
The user authorized this feature-only commit after full cargo xtask ci
stopped at the pre-existing geometry nonminimal_bool lint. The same
failure was reproduced without this patch at the published claim and
main. No unrelated lint fix or suppression is included.
* i18n: cover complete catalogs for Hex picker (#7445)
Add the three Hex message keys to Vietnamese in the feature's pending
locale file. Keep the unchanged English source values as explicit
fallbacks; no Vietnamese translations are claimed.
Audit the complete-catalog set (ar, he, ja, vi, zh) rather than only
the first catalog reported by CI. Preserve the existing completeness
test and all picker/Appearance code.
The completeness regression changes from red to green. Full local CI
and wasm checks remain blocked by failures independently reproduced
in clean upstream main; no unrelated fixes or suppressions are added.
* Appearance: use the shared opacity-aware color picker in Render (#7445)
Route the merged Render Appearance editor through the UI-kit picker,
passing exact opacity only for non-PBR looks. Keep a non-editable mixed
label and treat explicitly accepting the first color as a mixed edit.
Remove the external Hex field and duplicate parser, replace its gallery
entry with the shared mixed-aware picker, and update the control contract.
Preserve existing regression assertions and add actual Render UI tests
for alpha edits, precision, invalid drafts, PBR rejection and mixed edits.
Full local CI and wasm were run before this commit and remain blocked
by the separately reproduced unchanged upstream geometry lints and
prefs.bytes wasm error. No unrelated fixes or suppressions are included.
---------
Co-authored-by: mynoc <298906611+mynoc-96@users.noreply.github.com>
* claim: #8086
* Configuration table: a filter in the Add Column menu (#8086)
The + menu listed every parameter, feature suppression and body
material/appearance with no way to narrow it. A filter field now sits at
the top, takes focus when the menu opens, narrows the entries and the Face
Appearance submenu as typed, picks a lone match on Enter and clears when
the menu closes. A click into the field keeps the menu open (plus_header
closes on outside clicks; entries close it themselves), and the list keeps
its full height after the filter has emptied it once.
New kit element ui_kit::menu_filter (glyph, frameless editor, rule) so the
field does not read as an entry; gallery, i18n guard and docs/ui-kit.md
updated. Regression test in manage_dialogs_tests.
* claim: #6756
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Windows: never load a dxcompiler.dll found on PATH; FXC unless DXC ships beside the app (#6756)
wgpu's Dx12Compiler::Auto loads dxcompiler.dll by name, so Windows takes the
first one on PATH. SolidCraft ships none, and DXC 1.8.2505 from other programs'
folders (Obsidian, NVIDIA SDK Manager) crashed every start with
EXCEPTION_ILLEGAL_INSTRUCTION during the viewport shader compile.
solidcraft_gpu::dx12_compiler() now chooses: WGPU_DX12_COMPILER as wgpu reads
it when it names a compiler; otherwise DXC from the dxcompiler.dll beside the
program, by its full path, else FXC. The window, the headless/CLI instance and
the test helpers start with it, and dx12_compiles_with_fxc follows it.
WGPU_DX12_COMPILER=dxc keeps the old lookup.
Fixes#6756
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Spanish (es-ES): catch up with en.json
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Navigation preferences: name the Shift key through the catalog
Spanish now translates the key name, so the page painted it in English.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7356
* Orbit about the cursor: on an edge or sketch line, turn about the point under the cursor (#7356)
With Orbit around: point under the cursor, a drag that starts on a body
edge turned about the edge's middle, which on a long edge is far from
the cursor, and one that starts on a sketch curve turned about the
centre of the bodies in view. Edge and sketch curve hits now carry the
point under the cursor, which the pick already measured, and
pivot_under uses it. An edge hit's `mid` is unchanged, so selections
still record the edge's middle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Render wear: a Wear row and editor for the aging layers
* test: read Wear header text from accessibility label values
* test: restore body picks for Wear header recovery assertions
* Render environment editor: rotation, intensity, backdrop colour and ground through render.environment.set
* Render environment editor: rotation ring in the view with one undo step per drag
* Render environment: Source, orientation, backdrop, ground and atmosphere sections
* Keep segmented controls inside their allocated rows
* fix: compile legacy environment controls only for tests
* claim: #3693
* Fix timeline playback to show each rebuilt feature
* Move History playback into the Inspect ribbon
* Refuse Play History up front when playback couldn't run
Starting Play and the per-frame check that stops it were looking at
different app state, so Play could be accepted during an apply, a delete
check or queued history work and then stop silently on the next frame.
Both now use one playback_blocked check.
The UI also reads the engine's PlaybackAction as the typed enum instead of
matching strings, so a bad reply is an error rather than a quiet toggle.
* Put Play History in the History controls
History now shows five controls in transport order: start, previous,
play, next, end. Play runs timeline.play, so it turns into Stop while
playback runs, same as the ribbon button and the shortcut.
It's on by default (#3688, #3740, #4216). Anyone who wants the old four
controls back can right-click them and pick Hide Play Button, or clear
history_play_button under Preferences > Interface. In a named vertical
History too narrow for five buttons beside its grip, Play is left to the
ribbon rather than overlapping the grip.
* Draw the History Play button as a plain play/pause glyph
The Play button in the History controls now uses the same drawn glyphs as
its neighbours: a filled triangle, and two bars while History plays. The
triangle is bigger than the step arrows so it doesn't read as Forward.
The ribbon command keeps its timeline_play and timeline_stop icons.
* Keep the playback changes clear of PRs queued ahead
Several PRs in the merge queue touch the same lines, so this moves ours
aside without changing behaviour:
- history_play_button and its reset-test row sit with the other History
preferences, not beside view_confirm_corner (#7248 adds status_bar there).
- History keeps main's history_transport_width() for four controls (#6430
and #7459 call it); the Play button's count uses history_controls_width.
- A new or opened document stops playback after dim_view::cancel(), clear
of the line #7819 adds after reset_chat.
- The Play/Stop label swap moves from interactive_command_info, which #7906
rewrites, into the ribbon's command_info.
* Stop playback after the command completes, clear of #6433#6433 rewrites the session.execute line in execute_command, and our playback check sat right under it, so the queue couldn't merge the two. Checking the revision after command_completed does the same job a couple of lines later.
---------
Co-authored-by: cfaulkingham <colin.faulkingham@gmail.com>
* claim: #7834
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport: vertex markers where edges are drawn (#7834)
Each body's vertices (the ends of its pickable edges, once each) show as
small screen-space squares in the edge colour in the styles that draw
edges: shaded with edges, wireframe, and shaded with hidden edges, where
hidden vertices show faintly like hidden edges. Plain shaded draws none.
A marker is a lifted line from the vertex to itself in the body's block,
so it is instanced with the edges, cached with them, and depth-tested
like a highlight band. The existing vertex hover ring stays on top.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport tests: count edge segments apart from vertex markers (#7834)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Vertex markers: an option, off by default (#7834)
Adds the Vertex markers preference (Preferences > Graphics, off by default) and draws the dots only when it is on.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Viewport: cut dashed lines to the view, so a huge distance can't fill the memory
epaint makes one shape per dash and steps along a line in f32. The
viewport's dashed lines (the Extrude taper handle, Measure's legs, the
fillet radius guide, the inference and snap guides, a sketch text's
frame) were dashed over their whole projected length. With an Extrude
distance of 1e9 mm the taper line was billions of points long: the
frame never finished and filled the memory within a second.
`viewport::dashed_line` dashes a line that lies in view exactly as
before, and cuts one that reaches far off screen to the view (grown by
two dash periods) first, keeping its dashes in phase with its start.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport: compute a cut dashed line's ends in f64
A line a trillion points long lost its cut ends in f32: they collapsed to one point, and the part in view drew nothing. The new test caught it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Two new commands, view.next_tab and view.previous_tab, with Ctrl+Tab and
Ctrl+Shift+Tab as their default keys: they appear on the Keyboard Shortcuts
page and can be rebound or cleared like any other. The window steps along the
tab strip and goes round at either end; one design alone stays as it is, and
a "save changes?" prompt keeps its tab shown. The engine only echoes the
step (no design edit, no undo step); engine.batch refuses them like the
other steps that go to another design.
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A mesh body's row (an imported STL, 3MF, OBJ, ...) now shows a new
mesh_body icon, a triangulated cube in the mesh accent, instead of the
solid body's grey cube. Hovering a body row says Mesh body, Surface body
or Solid body. Body::is_mesh() decides; nothing new is saved.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7919
* Pick by the body's own size, not the camera's distance (#7919)
The occlusion test that decides whether an edge or vertex is hidden by the
face in front allowed a slack of `scene_radius(app) * 0.02`, and
`scene_radius` ends with `.max(app.cam.half_height() * 2.0)`: in an
orthographic view that is `0.016 x camera distance`. Zooming out grew the
slack without bound until a whole body fitted inside it and every edge behind
the front face counted as visible, and edges and vertices are offered before
faces, so they won the pick. Cutting the slack from the scene also gave a
small part in a large assembly a tolerance many times its own size.
`pick_slack` now takes a size and returns the mesh's own chord tolerance with
room to spare, `DisplayQuality::Coarse.chord(size) * 4.0`: a facet sits at
most a chord tolerance inside its surface, and that tolerance is already a
fraction of the body's size, so the slack no longer moves when the camera
does. Each body is tested with its own bounding box, which the loop already
holds. `view.pick` does the same, so an agent's pick still matches a click on
the same pixel. Sketch profiles and origin planes belong to no body and keep
a scene-level value, `scene_pick_slack`.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
* claim: #4750
Co-Authored-By: Claude <noreply@anthropic.com>
* Extend: pick two curves to extend both to where they meet (#4750)
`sketch.extend` gains a second form: `curves: [a, b]` names two lines or
arcs, with an optional `at: [[x,y],[x,y]]` naming the end of each to grow
(default: the end nearest the meeting point). Both grow along their own
line or circle to where they cross and the two ends are joined with one
Coincident, in one undo step. `moved` is the joined end's id.
- Where two crossings are possible (line and arc, two arcs) the one with
the least total growth is used; a tie is refused.
- A curve that already reaches the point does not grow. An end held by
other geometry or a constraint stays and gets a new line or arc.
- Parallel or collinear lines, curves that never meet, a point behind the
chosen end, the same curve twice, splines, ellipses, infinite lines,
offset geometry and malformed `curves`/`at` are refused with no change.
- The single-curve form is unchanged; its code is shared through
`grow_line` / `grow_arc`.
Canvas: in the Extend tool, Shift-click two curves. Shift goes through
the tool modifier registry as the new `extend_pair` action, and Extend
turns off Shift's midpoint snap. Escape drops a pending first pick. The
sketching guide describes the gesture.
Co-Authored-By: Claude <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #7893
* Toasts: one stack in the view's bottom-right corner, one width, buttons as in dialogs (#7893)
* Control protocol: toast_place in the sorted ui.prefs list (#7893)
* Toasts: a sketch test clears the status notice before clicking the view's corner (#7893)
The test's line end lands in the bottom-right corner, where notices now stack
and take clicks as they did at the bottom centre; the test is about the circle.
* Toasts: the pattern scenario's circle sits clear of the view's corner (#7893)
After the refit, a circle at y 0 landed in the bottom-right corner, where the
tool's prompt now stacks and takes clicks. The circle moves 40 mm up; the
pattern it checks is the same.
* claim: #8521
* feat: give History feature folders their own symbol
A folder of features in the History on the left drew the same folder icon
as the Browser's folders. It now draws feature_group, a pile of history
chips with the front one in blue, and so do Add to New Folder and Remove
from Folder in the History's menu. Other uses of folder keep it.
* Browser: the history in the browser, as a History layout (compact mode)
Settings > Interface > History gains "In browser" (view.history_layout dock: browser):
neither timeline is shown, and each component's History folder lists its sketches and
features in history order with the marker. Dragging the marker rolls the history back
through timeline.roll_to; Find in Timeline reveals the feature in the browser.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser history: sketches listed under their feature as in the vertical History
With Sketches: Under their feature, the history in the browser (compact mode) lists each
sketch under the first feature built from it, through the shared history_rows (#6494)
without reference rows: same rule, same fold key, so switching the History layout keeps
what is open. A drop above a row rolls back its listed sketches with it. Selecting a feature
lights the rows of its sketches, and selecting a sketch lights the features built from it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: with the history in the browser, the Sketches folder starts closed
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser history: sketch rows have the eye of their Sketches folder row
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* History in the browser: Arabic, Hebrew and Vietnamese for the layout's name
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Dialogs: scroll a long refusal into view with its Create Issue (#8454)
A dialog's refusal comes last in its fields. When the fields fill the
dialog, the refusal sits under the fold: an Extrude Cut that the kernel
refused showed only its first line, "boolean Cut: the operation failed: no",
and no Create Issue. The dialog now scrolls a new refusal into view once:
a refusal on OK at once, a preview's once no field is being typed in, so a
field never moves away while it is typed in.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dialogs: decide the reveal in one function and test it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Lists many PRs add to: no written lengths, one file per theme (#7747)
* xtask lists: the fixed-table allowlist in order, each with its own reason
* Lists: the wide-character blocks and the drawing scale presets as slices too (#7747)
* Lists: the drawing units test reads UNITS as a slice (#7747)
* claim: #8410
* Preferences: reverse trackpad orbit direction (#8410)
Add "Reverse trackpad orbit direction" under the pan settings in
Preferences > Navigation. orbit_reverse defaults off, so older settings
files load unchanged, and turns the Shift + two-finger orbit the other
way on both axes, as natural scrolling flips both. Pan, zoom and mouse
orbiting are untouched. Labels in en, ar, de, he, ja, ko, vi and zh as
a pending locale file; orbit_reverse in the control protocol's sorted
settings list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Point clouds: insert PLY, XYZ and PTS scans as a modelling reference (#5151)
A point cloud is kept in the design as a reference, drawn as depth-tested
dots and never a body.
- io: a PLY reader (ASCII, binary little/big endian; x, y, z of any numeric
type, optional colours, other elements skipped; counts checked against the
file) and XYZ/PTS text, thinned evenly past max_points. PLY meshes with
faces can also come in through file.insert_mesh.
- doc: Document.point_clouds (shared f32 points relative to an f64 origin,
colours, units, rigid placement, size and colour), stored as a binary
container part; format change in pending/point-clouds.rs.
- engine: pointcloud.insert / edit / delete / list; doc.open opens a cloud as
a new design; selection.delete takes point_clouds; view bounds include them.
- gpu: an instanced point-sprite pipeline (16 bytes a point).
- ui: Browser Point Clouds folder with eyes, menu and an Edit Point Cloud
card; drop, Open, Insert and file dialogs take .ply/.xyz/.pts; a CPU
viewport fallback; messages in en, en-GB, ja, zh, de and ko.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Point clouds: colour by the file, one colour or height, from the UI (#5151)
The Edit Point Cloud card gets Color By (File Colors, Single Color,
Height). Height is a blue-to-red ramp over design Z, between the cloud's
own two heights or, by default, a range worked out from the points (all
but the lowest and highest 2 %, from an even sample). pointcloud.insert
and pointcloud.edit take color_by and height_range; pointcloud.list
reports them. The colour of each point is worked out in one place
(PointCloud::shade) for the GPU and CPU viewports.
Also: the card's dropdowns compare the picked index (a dropdown's
response doesn't report the pick, so File Units did not change either).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Point clouds: integrate format registration and viewport caches (#5151)
* Point clouds: satisfy current UI audits and document comparisons (#5151)
Route model RGB data through the theme conversion boundary, provide a compact ribbon label, and include point clouds in the new document comparison. Gate the Unix-only CLI-link helper and test so Windows all-target checks remain buildable after the rebase.
* Point clouds: isolate translations for current main (#5151)
Move the existing 74 messages unchanged into one pending locale file and attribute it through a pending row, following the current repository workflow. Repository checks, 50 tooling tests, final workspace Clippy, wasm and generated-catalog equality checks passed after the rebase.
* Point clouds: fit the rebased code to main's GpuTarget and Frame
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Compare point clouds when reusing placement-independent results
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Point clouds: complete command help and required translations (#5151)
* Point clouds: size the save cap from the raised limit after the rebase
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Render output: size presets, Check list, Copy, progress pill, R and Esc, and the result viewer
* Complete Output GPU help translations and format choices
* Remove Output size labels already present in catalogs
* fix: compile the legacy finishing controls only for tests
* claim: #7295
* Sketch Dimension: choose horizontal or vertical from the two points' box (#7295)
Two points or a slanted line got the aligned distance whenever the text
was between the perpendiculars through them, so straight above the middle
of nearly level points was aligned and horizontal needed a thin wedge.
Now the text position relative to the box the two span picks the type:
inside it or in its outer corners aligned, above or below horizontal,
beside it vertical. This is the rule midpoint pairs already used, so both
share auto_orientation().
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Dimension: aligned across the line, horizontal or vertical by the pull past an end
Review on #7355: the aligned length must stay the default, and the box
rule shrank its zone to a thin strip on a shallow line. Now `auto` is
the distance between the two points everywhere across from them
(between the perpendiculars through them, and a tenth of their distance
past), and only a clear pull past an end changes it: up or down from
that end gives the horizontal distance, sideways the vertical one. The
two meet on the diagonals through the end, so both zones stay wide on a
shallow or steep line. Midpoint pairs keep main's box rule.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
DroppedFile::bytes exists only on native; the web build stopped at
take_theme_drops. Native keeps reading the file there. On the web, the
shell already reads every drop asynchronously before the app sees it: a
drop over Preferences' Import tile now arrives as a theme and goes to
prefs::import_theme_bytes, instead of being opened as a design.
Ctrl+W (Cmd+W) closes the active design, asking first when it is
unsaved; closing the last one shows the start page. In the web app a
capture-phase keydown listener keeps the browser from closing the tab
while a design is shown; on the start page the browser closes the tab.
Ctrl+W joins the keys the app reserves, and the tab menu's Close shows it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4071
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Define a named parameter inline from any value input (#4071)
Any value input, typed or sent as a command's expression parameter, takes
`name = expression` (or `#name = expression`): the design gets the user
parameter `name` with that expression, and the input stores `name`, in the
command's one undo step.
- doc: the lexer skips a definition's `name =`, so until the design stores
it the text evaluates as its expression and commands read and check it
like any value. `Document::define_inline` then turns every stored
definition (feature inputs and placements, dimension parameters, sketch
pattern and text values, joint and coupling values, sheet metal and
plastic rules, canvas planes) into a user parameter, the unit following
how the input reads a bare number. A taken, reserved or empty name, two
different values for one name, and a definition in a parameter's own
expression or a configuration cell are refused; all or nothing.
- engine: `Session::execute` runs it after any command whose parameters
hold definition-shaped text; the reply has `defined` (the first name,
as `sketch.dimension` already gives) and `definitions`. A refusal fails
the command, which leaves the design as it was.
- `parameters.change` with `new = expression` renames the parameter it
changes (a dimension's or feature input's own, references following)
and sets it; when the value is just `new`, it sets `new`. `changes`
refuses definitions. `expr.evaluate` reports `defines`.
- UI: lengths keep the name when the design unit is applied; sketch text
sends a definition as typed and previews only its value; the box corner
and offset Distance 2 use the value; fields whose command keeps no
expression (sketch scale, move, chamfer) refuse a definition with the
way to name it. The dimension editor says which parameter it named.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The hint "at the face" had no catalog message, so it stayed English in
every language. Add it in English and the 26 other catalogs, and check
that every plastic dialog hint has a message.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Select Other: a still hold opens the list while Orbit, Pan or Zoom is lit
With a mode lit in the navigation bar (or Space held), holding the left button still on overlapping geometry opened nothing, and the release then selected the top item as a click. The viewport treats such a mode as owning left drags: a plain click still selects, and every other check on the mode sits on a drag. The hold was the one place a press that had not moved counted as navigation.
The hold is now cancelled only by a navigation that has started (the drag past the click distance), so it behaves as it does with no mode lit. The hint and the user guide already describe the hold without that condition. A preset's modifier binding (Maya Alt, Alias Shift+Alt, HFSS Alt) and Ctrl+left orbit still cancel it at the press, as before: holding such a chord is a gesture to navigate.
Tests: holding still with each mode lit opens the list, picks from it and a click still selects; a drag under each mode still moves the view and opens nothing; Maya's Alt chord held still does not open the list (it fails without the preset check).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Select Other: the press that opened the list does not move the view
egui calls a press a drag once it has lasted 0.8 s. With Orbit, Pan or Zoom lit, the press that opened Select Other at 0.5 s then became an orbit, pan or zoom, and moving the pointer to a row turned the view under the open list. While the list is open, a primary press no longer takes the lit mode.
Test: a press held past 0.8 s that then moves keeps the list open and the view still, for each mode.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8318
* Preferences: the File view entry and the search field carry the window's name (#8318)
The File view's entry that opens Preferences said "Settings", and the window's
search field said "Search settings" / "No matching settings", while the window
title, the File menu and the help texts around the app say "Preferences". The
strings that name the window or point to it now use "Preferences"; ids unchanged.
Translations of these ids followed the English source and keep their wording
until the language teams catch up.
Tests: home::tests::the_entry_that_opens_preferences_carries_the_windows_name
and prefs_search::tests::the_search_field_names_the_window_it_searches fail on
main ("Settings" vs "Preferences") and pass here; the prefs_search:: and home::
suites pass, and the full solidcraft-ui-egui lib suite passed in `cargo xtask ci`.
* claim: #6901
* Feature windows choose Join, New Body or Cut from what the material touches (#6901)
Extrude, Revolve, Loft, Sweep, Coil and the Box, Cylinder, Sphere and Torus choose
their operation by running the Join on a copy of the design off the window thread
and counting the pieces: Join when the material makes one body with what it
touches, New Body when it would be a separate piece, Cut when it lies inside a
body (Revolve and the four primitives; Extrude keeps its own Cut). The choice
changes only when a check is in, a pick in the Operation row (the shown option
included) stops it for good, and OK waits for a running check. Hidden bodies take
no part: with some hidden, the shown ones become the feature's targets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Operation row: a pick in Extrude stops its own choice at once; ja/zh strings, gallery entry
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Operation check: contact test first, mesh volumes for Cut, OK takes the evaluated Join
Material touching no body is a New Body without running the Join (the contact
test costs 0-240 ms where the Join costs seconds on a large body). Inside is told
from display-mesh volumes instead of exact ones (8 s on a 400-hole plate). The
check evaluates the Join through Session::ahead, and OK of the same commands
takes it (Session::prime) rather than computing it again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Preference: Choose the operation automatically (on by default)
Preferences > Design gets "Choose the operation automatically" (auto_operation,
on by default). Off, feature windows don't choose Join, New Body or Cut from
what their material touches: each keeps the operation it opens with (Extrude
its own Join or Cut), no check runs and OK doesn't wait for one, as before
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Arabic, Hebrew, Vietnamese and Turkish strings for the operation choice and its preference
Arabic, Hebrew and Vietnamese are complete catalogs now, and Turkish has a full
catalog, so this change's three strings get them too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Operation check: a closed window's check stops; the icon audit doesn't choose
A window's operation check kept running after the window closed, a Join on
the design for nothing, and the test harness waited for it after every step:
the icon audit, which opens every window, took ~30 min instead of ~1. The
check now runs under a Progress, and closing the window (or one that doesn't
choose) abandons it: its evaluation stops at the next feature and nothing
waits for it. The icon audit turns auto_operation off, as it only looks at
icons (75 s again).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Box placement test: the window keeps its New Body
The test #6248 added places a box that overlaps Base and expects a second body;
with #6901 the window would join or cut it. The test is about where the box
goes, so it turns auto_operation off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Join pieces: read the target lists leniently after the rebase
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #7717
* Stand-up offer: a note only when the part seems to lie on its back (#7717)
* Stand-up note: an unclear shape still gets the note
* Stand-up note: a Don't ask again button, as the dialog has
* Control protocol: the stand-up settings in the sorted ui.prefs list (#7717)
* Stand-up note: the control import test asks as before (#7717)
The test checks the caller's `up`, so it sets the setting to Ask and every
file from another program still gets the offer.
* claim: #6645
* Sketch: Center Point Arc follows the cursor clockwise or counter-clockwise (#6645)
The centre-point arc always ran counter-clockwise from its start; a
clockwise arc needed a typed negative sweep. The tool now tracks the
signed turn the cursor makes round the centre after the start is placed,
and its sign sets the direction of the preview, the live Sweep box and
the created arc.
sketch.arc.center_point takes `clockwise` with a clicked end: the arc is
stored counter-clockwise from the end and reversed, as a negative sweep
is, so the start keeps its radius and `<id>.start`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq
* Sketch: keep the old counter-clockwise centre-point arc behind a preference (#6645)
Preferences > Sketch gets "Center point arc follows the cursor's
direction" (center_arc_follows_cursor, on). Off, the arc runs
counter-clockwise from the start whichever way the cursor went, as it
always did. Its strings are a pending locale file (en, de).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq
* Sketch: Japanese and Chinese strings for the centre-point arc preference (#6645)
ja and zh are complete catalogs, so the new preference's label and tip
need them too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq
* Sketch: Arabic, Hebrew and Vietnamese strings for the centre-point arc preference (#6645)
Arabic, Hebrew and Vietnamese became complete catalogs on main, so the new
preference needs them too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A new command, sketch.spline.reverse, runs a spline the other way: its
point list is reversed in place, so its last point becomes its first and
the curve keeps its path (chord-length fits, uniform clamped knots and
closed fits read the same both ways). Points and constraints stay. A
projected spline and one an offset uses or makes are refused. The
sketch's right-click menu offers it for one selected spline.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8301
* Timeline: the feature menu's suppress item follows the reader's language (#8301)
Suppress Features / Unsuppress Features were raw literals. Menu::label()
translates a label only when a catalog entry carries it, and none did, so the
item stayed English in every language, the Japanese UI included.
The two labels are now the messages timeline.suppress_features and
timeline.unsuppress_features in a new assets/locales/pending file: the English
wording is unchanged, and the complete catalogs (ar, he, ja, vi, zh) plus de and
ko carry the translations.
cargo test --profile ci -p solidcraft-ui-egui --lib -- timeline::tests::the_feature_menu_suppress_item_follows_the_language
fails on the claim commit (the Japanese menu paints the English literal) and
passes with the change.
* Fix issue with settings window automatically scrolling to selected item, preventing scrolling by user
* Fix issue with settings window automatically scrolling to selected item, preventing scrolling by user
In the Sketch > Create drop-down a plain row such as Point was drawn
200 pt wide, the minimum width its labels fit in, while a family row such
as Slot filled the menu. The menu was as wide as the one-line pin hint in
its footer, so the plain rows' hover background and pin stopped short of
the right edge.
The Create menu now sets its width from its rows before drawing them, as
the other panel drop-downs do, and passes that width to the plain rows
instead of recomputing it over a subset. Family rows fill the same width
and the footer hint wraps inside it. The overflow menu's plain rows take
the width of all its commands in the same way. A family's submenu still
sizes its variants to their own labels.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Most browser menus show V beside Show/Hide, but the V key always ran
toggle_visibility, which acts on the selection. A right-click on a body or
sketch row also selects it, so the two agreed there; a right-click on the
Bodies, Sketches or Origin folder, a group, the component or an origin plane
does not, so V did nothing, or flipped a body selected earlier, and left the
menu open.
With a menu open, V now runs that menu's row whose shortcut is V, through
run_item as a click does, and closes the menu (context_menu::press_shortcut).
A disabled row takes the key and does nothing. With no menu open, or a menu
without such a row, V still acts on the selection (#4128, #4409: V stays
selection-based).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8329
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* Save As offers the open file's own name (#8329)
Save As, Save As JSON and Save a Copy proposed the design's name, the one
stored inside the file. Copies of a file under other names keep the
stored name, so "Sample Plate-bug.solidcraft" was offered
"Sample Plate.sc", the same as its sibling, and one replaced the other.
Session::save_as_name() offers the stem of the open file unless the
design was renamed since it was opened or last saved, and the design's
name otherwise (a new design, or one renamed in the Browser).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
---------
Co-authored-by: Claude <noreply@anthropic.com>