Commit Graph

513 Commits

Author SHA1 Message Date
NOWN-DEV c66e33284b Joints: offsets, angles and values typed as expressions follow their parameters (#2385) (#2386)
Thanks @NOWN-DEV.
2026-10-18 22:13:13 -04:00
NOWN-DEV 57d210130c Assembly: place an occurrence or an inserted STEP file by a matrix (#1890) (#1901)
Thanks @NOWN-DEV.
2026-10-18 22:03:20 -04:00
CypherNaugh_0x 8e762fee57 Add optional ambient occlusion and graphics quality presets (#1135)
Thanks @CypherNaught-0x.
2026-10-18 21:29:03 -04:00
phanoob 6b1fc16d47 Sketch projection: a solid's edges come in as their exact curves (#1508)
Thanks @phanoob.
2026-10-18 21:23:11 -04:00
leValdemar19 86b2b97d6f Sketch Offset: constrain to the ends of an offset spline (#2424) (#2615)
* claim: #2424

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Sketch Offset: constrain to the ends of an offset spline (#2424)

An associated offset spline hid all of its generated fit nodes, its two
end points included, so nothing snapped to them, and a curve drawn from
one shared the node and was refused ("invalid offset output point roles").

- An open offset's end points are shown and snapped to again; its
  interior fit nodes stay private.
- After every sketch edit, a curve that took an offset node gets its own
  point there, coincident with the node: the offset keeps sole ownership
  and the curve follows the offset when its source moves.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Scenario: lines snap to and close onto an offset spline's ends (#2424)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 21:16:43 -04:00
NOWN-DEV c177adfceb Clearance: check a shared volume against the union, allowing for the bodies' measuring error (#2090)
* Clearance: check a shared volume against the bodies and their union

An intersection can come out well formed and still wrong: one of a
mirrored pair of imported parts shared three times the volume of its
twin. The shared volume is now compared with vol(a) + vol(b) - vol(a ∪ b),
on the same (cut down) bodies; when they differ by more than 1 % (plus the
bodies' own measuring error), the pair is reported unchecked with both
numbers. Where the union gives no answer, the intersection stands.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Clearance: let the union cross-check allow for the bodies' measuring error

vol(a) + vol(b) - vol(a ∪ b) is a difference of measured volumes and
carries the error of all three, so correct small overlaps on large bodies
came back unchecked (0.96 mm³ where the union implied -0.75). measure
keeps a face's fine tessellation when it is within 1 % of one with a
5 times coarser chord, so a measured volume can be off by up to 0.25 %:
the allowance is now 1 % of the larger of the two answers plus 0.25 % of
the three volumes. Past it, a union that implies nothing (within that
noise of zero, or below it) while the shared part is at most a tenth of
the smaller body cannot tell, and the shared part stands. A shared part
of 412 mm³ where bodies of a few thousand imply 141 is still caught.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Clearance: tighten the union check's measuring allowance to 1e-4

The old note cited measure's 1 % gate, which compares face areas, not
volumes, and its 0.25 % was about 100 times the disagreement the bodies'
measures actually show. The allowance is now justified from volumes: a
curved face's chord shortfall cancels between a body and the union except
where the chord changes, which stays near 2e-5 of the three volumes; 1e-4
leaves five times that. A 40 mm roller pressed 0.2 mm into a 2 m plate
exercises it: with no allowance the pair is left unchecked (7.52 mm³
measured against 8.16 implied), with it the overlap is reported.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-18 21:16:37 -04:00
JIJINBEI 7ad5130cd2 refactor: geom::UnitVec3 for unit axes and normals (#2603)
* geom: UnitVec3; a face's analytic axes and normals are unit by type

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: UnitVec3 adds to and subtracts from a Vec3

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* kernel, doc, engine: cylinder axes and measured normals held as UnitVec3

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* kernel, engine: functions that take a unit axis or direction say so by type

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: a face's normal goes to Plane::from_normal as is

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* kernel, doc: main's new cylinder helpers take the face's axis as a UnitVec3

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 21:16:31 -04:00
bherbruck 9eb1540a34 Docs: describe SolidCraft as independent CAD (#2768)
Reword comments, docs and package descriptions so they describe SolidCraft's own behaviour instead of comparing it to another product. The trademark notice, the commercial-CAD rule and the navigation preset name stay as they were.

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-18 21:16:11 -04:00
NOWN-DEV ed64988d8f Joints: a round origin keeps its end when the face it opens onto gets other neighbours (#2760)
A round origin's end is kept by the name of the face across the rim. On
a face in pieces (a sheet split by a groove or a bend) that name lists
the faces round the piece, and when those change (a hole nearby moves
or goes) the name matched neither rim, so the end fell back to the
nearer end of the stored pick: a pick near one end of a thin wall that
the design moved past mid-wall turned a part through 180 degrees. The
end whose rim matches the name better now wins: the face itself, a face
merged into it, then a piece of it, then the same face by its stem.

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-18 21:16:01 -04:00
bherbruck e887792182 Fix orbit about the picked point (regression in 0.16.0) (#2753)
Orbiting about the point under the cursor (or the origin) turned the camera
about its target and then panned to put the pivot back. The pan works at the
target's depth with the parallel-view scale, so in a perspective view the
pivot slid off its pixel and the model swung about the camera.

The camera now turns rigidly about the pivot: Camera::orbit_about keeps the
pivot's coordinates in the camera's frame and rebuilds the target from the
new orientation, so the pivot stays exactly on its pixel in both projections.
The Shift snap spring and view.navigate's pivot orbit use the same.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 22:51:37 +00:00
NOWN-DEV 6d410c342c Joints: origins on an edge of a face, at its middle or a corner (#2403) (#2404)
* Joints: a face or circle origin keeps its turn as the face tilts

A face- or circle-centre joint origin worked out its frame's x from the normal alone
(`Vec3::any_perp`), which switches axis where the normal crosses 0.9 along X: a part on a face
tilted past about 64° by a parameter spun a right angle about the face. New origins keep the x
they have when picked (`x`, component coordinates) and each solve lays it onto the face as it is
now, so the part tilts with the face without spinning. Origins saved without it are placed as
before.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Joints: origins on an edge of a face, at its middle or a corner

`joint.origin` and `joint.create` take `edge: [x,y,z]` (a point on an edge of a planar face),
with `on` (which face; default the larger planar face beside it) and `corner` (the end near that
point). The origin sits at the edge's middle (z out of the face, y into it) or at the corner (x
and y along its two edges into the face, right-handed whichever way the edges run). The edge, the
face and the corner's other edge are kept by name and found again on every solve, so a part set
40 mm in from a panel's corner stays there when the panel changes size; a name that finds nothing
leaves the joint out with the reason.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-18 18:10:28 -04:00
NOWN-DEV 8313c3468a Joint origins: resolve by the named face, keep a hole's end and the turn (#2186) (#2187)
Thanks @NOWN-DEV.
2026-10-18 13:08:23 -04:00
Yuto Nakamura e766fb14fb Preserve warm assembly caches across Save As renames (#2120)
Thanks @yutyan0119.
2026-10-18 12:11:56 -04:00
Loohi 9c7afb6076 Single hole follows its sketch point (#2110) (#2336)
Thanks @Loohi.
2026-10-18 11:35:15 -04:00
N3MI-DG 3eeb20d2bd Browser: hidden items grey out, and folders keep their own visibility (#2308)
Thanks @N3MI-DG.
2026-10-18 11:34:55 -04:00
H. Conrad 4e0601611c Fix id overflow (#1589)
Thanks @Ian-cmd-ops.
2026-10-18 06:53:57 -04:00
Brazz 07708a4e2a Extrude: a taper composes with a start offset (#2312) (#2313)
Thanks @acbrazzl.
2026-10-18 06:18:43 -04:00
Artem Sushchev a4c4b411e5 Combine: a cut keeps a body joined from separate pieces in one body (#2247)
Thanks @H1D.
2026-10-18 06:02:44 -04:00
Irakli Kourtis 83c31d77c4 surface.boundary: surfaces through boundary curves and curve networks (#763) (#2129)
* feat(geom): surfaces through curve networks, and spline spaces to build them

Adds spline_space (clamped B-spline spaces, Hermite interpolation, exact
embedding by Bézier degree elevation and knot insertion, a monotone cubic
for reparameterising) and network (loft, Coons and Gordon surfaces through
curves in one or two directions, with G1/G2 cross-boundary conditions
against a neighbouring face). Part of #763.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* feat(kernel): boundary surfaces from sketch curves, 3D curves and edges

kernel::boundary_network turns sketch chains, 3D sketch polylines and edge chains
into network curves, gives G1 frames of the faces along open edges
(EdgeFaces), builds the B-spline face (sides split at chain vertices so a
join shares the body's edges) and joins it into a surface body by stitching.
G2 is refused for now (not supported yet). Part of #763.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(kernel): second derivatives of B-spline surfaces in the vendored truck-geometry

BSplineSurface::uuder and vvder multiplied the second differences by p
instead of p·(p − 1), as BSplineCurve::der2 does, so every surface of
degree p ≥ 3 (NURBS too, through its homogeneous surface) reported
1/(p − 1) of its second derivative: a cubic surface's curvature read as
half. This is why a G2 boundary surface on a cylinder measured half the
curvature it carries (#763). New tests hold both to finite differences
for degrees 2 to 5.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(kernel): G2 boundary surfaces against a body's face

The network always carried the face's curvature across a G2 edge; the
refusal came from measuring it with truck's halved surface second
derivatives (fixed in the previous commit). EdgeFaces now reads the
face's second fundamental form from the exact second derivatives
instead of differencing the normal. A new test holds the curvature
across a cylinder's edge to the cylinder's within 0.1%, also with a
sheared far curve; G3 is refused (a network holds up to G2).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* test(kernel): a boundary patch with straight corners measures its own area

A stadium's arcs meet its lines at 180°, so the Coons patch is singular
at its corners. From such a corner the reference mesher's boundary walk
ran onto the B-spline's extrapolation past its domain (a planar spline
passes through every point of its plane there), and the face measured
289 mm² for its 158.5 (#763). The vendored mesher's bounded projection
(nearest_projection, #2043) keeps the walk on the domain; this holds it
there, by the faces, the measuring mesh and the display mesh. The
display path (#1653) was never affected.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(geom,kernel): three-sided boundary surfaces (one side collapsed to a point)

A network curve may be a PointCurve: the apex where the two sides beside
it meet. The curves through it cross it at the point itself, its row of
the net collapses there, and the kernel's face leaves that side out of
its loop (three edges, one vertex at the apex). One point per patch, as
a side; refused elsewhere, when it moves, or with a continuity
condition. Tests: a triangle and a quarter disc filled flat with their
analytic areas (40 mm², 25π), by geom and by the kernel's faces and
meshes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(doc): boundary surfaces through curve networks and loops of three or four

FeatureKind::SurfaceNetwork saves a network as `u` and `v` curves, each
a sketch chain (planar or 3D), a chain of a body's edges with an
optional G1/G2 continuity, or a point (the apex of a three-sided
patch), and an `operation` that can join the surface into the body of
its edges. A SurfaceBoundary of three or four sketch curves, refused
until now, builds as the flat Coons patch of its loop (three collapse
the side opposite the first curve). The format change is one pending
file; feature-walk goldens record the new variant's sketches, bodies
and points.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(engine): surface.boundary through loops of three or four and curve networks

The command keeps its loop form (two to four curves of one sketch; three
and four now build the flat patch of the loop, crown refused there) and
gains a network form: `u` and `v`, each curve a sketch curve id, a
{sketch?, curves} chain (planar or 3D), a {body, edges, continuity?}
edge chain (g1/g2 with the face beside it) or a {point} for a
three-sided patch, with `operation` new or join. Edits may move between
the two forms (timeline.redefine accepts the command now that it has a
dialog).

Tests: analytic areas of loop patches and of a hyperbolic paraboloid
bounded by four 3D lines (every mesh vertex on z = xy/10), a loft
across two sketches, G1 and G2 measured across a cylinder's edge with
inspect.continuity (angle < 0.1°; curvature jump 1e-16 with G2 against
0.027 with G1), 26 hostile networks refused without panicking, and u/v
added to hostile_params_never_panic.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(ui): Boundary Surface dialog

Curves and Cross curves take sketch curves and edges (picks that meet
end to end in one sketch or body are one chain); Continuity and
Operation (New Body or Join). Two to four sketch curves of one sketch
with nothing across are the loop patch; anything else is a network.
Edit Feature brings either back (per-side orders, crown and stations
the dialog does not show are kept). Strings in en, ja and zh.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* docs: ROADMAP M8 and the bridge patch's notes for boundary networks (#763)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* test(oracle): a boundary surface through a loop, thickened (#763)

Case 83: four sketch curves (a square's three sides and a half circle
for its top) make one boundary surface, thickened 2 mm; analytic values
from tools/oracle-analytic/cases_surfaces.py (V = 2A, area 2A + 2P,
centroid by moments). Recipes gain boundary_surface, thicken and remove.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* refactor: boundary surfaces, review cleanups

Project onto the face once per derivative evaluation (the frame is
passed to natural() and reused by scale()), keep each track's
finite-difference step instead of rescanning its table, export the
kernel's edge-pick and chain caps and the default station count for
the engine, doc and dialog to share, map TooLarge spline errors to
KernelError::TooLarge, reuse the engine's operation parser, and skip
the dialog's sketch lookup when the picks are no loop.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-17 21:47:38 -04:00
JIJINBEI 2acc344aa4 Sketch: show open and untied profile ends (#2000) (#2001)
Thanks @jijinbei.
2026-10-17 18:52:12 -04:00
Koschtetnix 487aa64e10 Multi profile extrusion performance (#2064)
Thanks @Koschtetnix.
2026-10-17 18:30:52 -04:00
Pablo López cb857f1fa7 Rib/Web: grow along the sketch normal (#2056) (#2057)
Thanks @pablopeza.
2026-10-17 14:15:03 -04:00
bherbruck e347f820e6 Fix red main: give inspect.silhouette an icon; scroll to Colour vision in its scenario (#2134)
Preferences > Graphics grew a row (Grid follows the view, #2035), so the Colour vision
control now sits below the fold of the fixed-size page; the scenario scrolls to it.
The page itself already scrolls for real users.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-17 13:53:01 -04:00
NOWN-DEV 09b3bd0e01 Sheet metal: machine a hole feature's drills in one pass, keep cuts after a text cut (#1979) (#1980)
Thanks @NOWN-DEV.
2026-10-17 08:52:19 -04:00
Irakli Kourtis 0a66697da8 Continuity Analysis tool, legend and theme colours on #1642's inspect.continuity; curvature combs on faces (#770) (#1247)
Thanks @jyviko.
2026-10-17 08:38:55 -04:00
bherbruck a000bd69cf Clearance: give inspect.clearance the Interference icon (#1991)
The icon check from #853 requires every command to have one; #1900 added
inspect.clearance without, which failed Format and repository checks on
main and every PR.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-17 08:30:52 -04:00
franco michetti b7eac9220b inspect.silhouette: the outline of bodies seen from a view, as a mask (#1743)
Thanks @onembyte.
2026-10-17 06:56:25 -04:00
NOWN-DEV 3fe6bacea0 fix: a blind cut on a long body keeps its small rounds (#1593)
Thanks @NOWN-DEV.
2026-10-17 05:37:16 -04:00
NOWN-DEV 186555dbe9 Clearance report: overlaps, near pairs and nearest bodies (#1900)
Thanks @NOWN-DEV.
2026-10-17 04:54:39 -04:00
NOWN-DEV 962070e955 Interference: a pin a hair off the axis of its hole gets its crescent (#1893)
Thanks @NOWN-DEV.
2026-10-17 04:08:31 -04:00
NOWN-DEV 2831426c51 solid.mirror: mirror bodies of placed components where they are shown (#1896)
Thanks @NOWN-DEV.
2026-10-17 04:08:22 -04:00
NOWN-DEV 9a4d936b7b fix: text cut into a large part stays on the exact 2D route (#1903)
Thanks @NOWN-DEV.
2026-10-17 04:08:12 -04:00
Irakli Kourtis 98ce6a4ee8 Sweep guide rails and two-rail sweep (#771) (#1806)
Thanks @jyviko.
2026-10-17 04:07:46 -04:00
Nathan Dane 64966bab88 Implement the reviewed UI icon system and durable review workflow (#853)
Thanks @Nathan-Dane.
2026-10-17 04:07:16 -04:00
selune 37496198bf Merge pull request #1712 from SychPL/feat/motion-analysis
Motion analysis: chart a study's joints and points, and find the parts that collide along it
2026-10-17 00:09:37 +02:00
MateuszSychXpl eb6abecc3d Sketch symmetry: the free symmetry line moves when both mirrored lines are fixed (#1796)
A constraint is applied with its first-picked entities held and the second
moving; when the second can't move, a first one moves instead. That fallback
was skipped as soon as ANY first entity was locked, so a free construction
line between two fixed lines was never tried, and Symmetry was refused with
"neither entity can move".

Each first entity that can move is now tried on its own, after the second.
Nothing changes where the second can move.
2026-10-16 23:02:33 +02:00
HiroKenEz 19be7d27e7 Tapered join on a face: sew a whole face, keep the run-on inside the body (#1534) (#1763)
Thanks @HiroKenEz.
2026-10-16 13:26:15 -04:00
Mateusz Sych 31b2ddc0cf Split Body: the face a plane split cuts takes an attachment that follows the plane (#565) (#1746)
Thanks @SychPL.
2026-10-16 13:26:11 -04:00
Colin Faulkingham da65b4fc8c Thread: suggest cylinder size and expose metric diameter and pitch (#1759)
Thanks @cfaulkingham.
2026-10-16 12:26:23 -04:00
MateuszSychXpl f96aaa2a98 Motion analysis: a check that runs out before its first step says so, Contact sets offered only when one is active 2026-10-16 17:52:39 +02:00
MateuszSychXpl 53ae46e6b5 Motion analysis: modules in order after the rebase onto the animation export 2026-10-16 17:52:39 +02:00
MateuszSychXpl 3f81495514 Motion analysis review round 4: unwrap only followers within half a turn, found pairs in a set, key values kept in full 2026-10-16 17:52:39 +02:00
MateuszSychXpl c34e607f5b Motion analysis review round 3: ui.start reads a study as motion.study does, keys off the timeline refused, pairs counted once, sub-assembly copies documented 2026-10-16 17:52:39 +02:00
MateuszSychXpl 3128762014 Motion analysis review round 2: a number names a study by id first, the dialog analyses the study it made on the scratch copy, duration 0.001 s or more, volumes by the innermost member 2026-10-16 17:52:39 +02:00
MateuszSychXpl 7119d60d9d Motion analysis review round 1: unwrap only followers and past half a turn, studies by id, refuse keys between steps, count mesh placement work, duration checked in the dialog, Browser joint pick charted 2026-10-16 17:52:39 +02:00
MateuszSychXpl f5871608f4 Motion analysis: scripting handles, depth wording, one hit per member pair a sample 2026-10-16 17:52:39 +02:00
MateuszSychXpl 8fdf6a61a2 Motion analysis: plots of a study's joint values and a point's path, and the parts that collide along it
- motion.plot: joint values and a point's path sampled as the study plays (closed loops
  following), with velocities and accelerations by finite differences, per step or per
  second with a duration.
- motion.interference: the pairs of parts that pass through each other along a study, with
  the first step, the step ranges, the depth and the shared volume; occurrences, against
  or contact sets choose the pairs; bounded samples and work.
- Motion Study dialog: a Study box opens a saved study; a chart of a joint value or a
  picked point with a cursor at the step shown (click to move there); Check collisions
  with the steps shaded on the chart. ui.start motion.study takes study.
2026-10-16 17:52:38 +02:00
Mateusz Sych 6232fa33c2 Joints: cam and follower coupling (joint.cam) (#1734)
Thanks @SychPL.
2026-10-16 10:26:35 -04:00
cronos bba03803b7 Accelerate current-view DXF export and keep desktop exports responsive (#1738)
Thanks @crono2250.
2026-10-16 10:26:27 -04:00
Mateusz Sych 3501fa2c54 Emboss: say how far the picked point is from a face (#392) (#1733)
Thanks @SychPL.
2026-10-16 10:26:20 -04:00