A Single hole can take up to two straight edges of its face as references,
each with the distance of the hole's centre from that edge's line, measured
in the face's plane. `solid.hole` takes them as `references: [{edge, distance}]`;
the edges are found again by their persistent names, else their points, so
the hole follows them when the part changes, and each distance is a
parameter. A bad reference (no edge there, a curved edge, one square to the
face, parallel edges, a negative distance, a centre off the face) is refused.
In the Hole dialog, Reference 1 and 2 follow the face, each with its Distance
row; the canvas shows each distance as a dimension from its edge to the hole,
with a box just past the edge to type it in. Picking an edge measures its
distance (and its box takes the keyboard), typing one moves the hole, and
moving the hole measures them again. Edit Feature picks the edges again with
their distances.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
cadmpeg 0.6.3 is pure Rust (ruzstd instead of the zstd C library, zip 9), so
solidcraft-io depends on it on every target and the wasm build reads .FCStd
and .3dm files like the desktop app. The browser's file pickers offer them.
0.6.3 replaces DecodeOptions::container_only with a decode depth; ask for
Geometry, what its STEP writer reads. zip 8 leaves the tree, and with it the
three cargo-deny advisory exceptions kept for it.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* assembly(feat): ground first parts and drag free joint chains
Ground the first top-level part when it is created and let face dragging reposition free occurrences or any member of a floating joint chain in one undo step. Preserve exact repeated-placement frames, joint values, modifier selection and Escape cancellation. Keep the accumulated fixture, viewport layout and documentation integration fixes from the existing PR.
Signed-off-by: Karl Von Richter<karl@embeint.com>
* assembly(fix): update movable fixtures for first-part grounding
Accept the documented grounded override in component creation, explicitly free movement fixtures, and keep linked clipboard pastes movable even in an empty document. Cover first and reused linked pastes, default insertion grounding, and single-step undo in the existing link tests.
Signed-off-by: Karl Von Richter<karl@embeint.com>
* assembly(test): keep the motion-cost crank free
Unground the first component in the document-level joint-face measurement fixture so its motion samples can rotate after first-part grounding. Preserve the rotation and shared-measurement assertions that caught the Linux CI failure.
Signed-off-by: Karl Von Richter<karl@embeint.com>
* assembly(test): free the frame placement fixture
Create the frame-member placement fixture ungrounded before moving it above its root sketch. Keep its world-space member assertions while respecting first-part grounding in the frame tests added on main.
Signed-off-by: Karl Von Richter<karl@embeint.com>
---------
Signed-off-by: Karl Von Richter<karl@embeint.com>
* Macos: keep touchpad/key modifiers true to fusion
* fix: remove obsolete orbit snap reset from trackpad navigation
Upstream removed ViewportState::orbit_snap. The new trackpad orbit path retained one reference, causing E0609 in the PR merge build.
Validation: all seven trackpad tests pass; cargo check -p solidcraft-ui-egui --all-targets passes on the exact failing CI merge 66a2791b with this fix applied; rustfmt and diff checks pass.
Co-Authored-By: GitHub Copilot <noreply@github.com>
* fix: retain Fusion trackpad help in refactored preferences
Preserve upstream's new preferences pages and apply the translated Fusion trackpad tooltip in prefs/navigation.rs.
Validation: cargo build -p solidcraft passed. Tests and full CI were not run, as requested.
Co-Authored-By: GitHub Copilot <noreply@github.com>
* style: format Fusion trackpad preferences tooltip
Apply rustfmt's required wrapping for the relocated tooltip. No behavior changes.
Validation: cargo fmt --all -- --check and git diff --check passed.
Co-Authored-By: GitHub Copilot <noreply@github.com>
---------
Co-authored-by: GitHub Copilot <noreply@github.com>
* claim: #4003
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: the profile library (#4003)
The first slice of frames and weldments: the cross-sections structural members
will be made of, each SolidCraft's own parametric definition built in code
(no vendor or standard size tables are shipped).
- solidcraft_doc::frame: bar, round bar, rectangular and round tube, angle,
channel, I-beam and a generic T-slot extrusion as exact line/arc regions,
with defaults worked out from the profile's size, refusals that name the
dimension that does not fit, anchors and placement, and exact section
properties (area, centroid, Ixx/Iyy/Ixy by Green's theorem).
- frame.profile.list, frame.profile.properties (with mass per metre for a
density) and frame.profile.insert (draws a profile into a sketch, locked by
default, at a point, anchor and angle).
- Tests against hand-computed values (rectangles, circles, composite
rectangles by the parallel-axis theorem, fillet spandrels), hostile input,
extrusion volume, undo; catalog entries in every locale; docs/frames.md;
ROADMAP M15.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: drop the built-in T-slot profile (#4003)
Aluminium extrusions and other vendor sections come from the user's own
sketch (drawn or inserted from the vendor's DXF), so the library keeps the
plain steel shapes only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: members along frame sketch lines (#4003)
frame.member lays one body per straight line of a frame sketch (2D lines or
3D sketch lines), its cross-section square to the line from end to end:
- profile: a built-in profile, or profile_sketch, a sketch whose material
(nested loops alternating, so two circles make a tube) is the section in
its own x and y around its origin; profiles picks override it.
- anchor (origin, centre, centroid or a bounding-box corner or edge middle),
angle (an angle expression, so a parameter), mirror.
- Orientation: the profile's y as near world up as the line allows, x
square to both; a vertical member's x is world X (frame::member_axes).
- Members follow sketch and parameter edits, undo as one step, save and
reopen (format: pending/frame-members.rs), and are named after the profile
(Rect Tube 40x40x3, (2)…), numbering on past names already taken.
Tests against hand-computed volumes and bounding boxes (rectangle, 3D
tower lines, parameter edit, sketch tube profile and picks, anchor/angle/
mirror), refusals, undo/redo and reopen; walk fixtures and goldens; docs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: fixes from the adversarial review (#4003)
- Default member lines are what was drawn: projected and other linked curves
and 3D wires (a face sketch's edges) and lines of no length are left out.
- A profile sketch's material starts from its drawn profiles, as
solid.extrude's "all" does, so a section sketched on a face works; the
even-odd test uses outlines and boxes worked out once, capped at 256.
- Member names are pinned to their lines (`names`, by line id; `body_name`
is the base): deleting or adding a line, or deleting another feature, no
longer renames other members, and frame.member stores every name it gives.
body.rename renames a member on its line (also for later member features);
a copy whose body_names were set still names its members by position.
- Built-in profile dimensions are expressions (ProfileSpec): they follow
parameters, bare numbers take the design's units, and they are feature
inputs. frame.profile.properties/insert read them the same way.
- Default root/toe radii shrink to the room a thick section leaves; radii
given are checked by name; a radius must be 0 or at least 0.01 mm; error
messages report the wall or flange value given, not twice it.
- A line within 1e-6 rad of vertical orients as vertical, so rounding never
turns a post a quarter turn.
- A 2D frame sketch in a differently placed component is mapped into the
member's frame, and member features recompute when placements change.
- Caps before lookups for a design's `lines`; a line listed twice is
refused; a 3D wire that runs back on itself is not a line.
Regression tests for each, from the review's scenarios.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: the Frame Member dialog on the ribbon (#4003)
- Frame Member (MODEL > Create) opens a dialog: the frame sketch's lines
picked in the view (or All Lines), a built-in profile and its dimensions or
a section picked in another sketch, anchor, angle, mirror and name, with a
live preview. Edit Feature reopens it filled in.
- Lines picked in the view keep their sketch (a SKETCH_LINES input picks
ExternalSketchCurve): line ids are each sketch's own, so two 3D sketches
both have a `w2`, and the members went on the newer sketch's lines.
- timeline.redefine takes frame.member. Members keep their names through an
edit unless it gives them a new body_name; frame.member takes `names`.
- A member whose section is a whole profile sketch keeps it when edited
(the dialog shows the sketch instead of picking every region, which would
fill a tube's hole).
- An original frame_member icon, open for review, on the ribbon, timeline
and browser.
- The angle profile is listed as L-Angle, and web and flange as Web/Flange
thickness, so they translate apart from the existing Angle, Web and Flange;
the dialog's labels are in en, ja and zh. en-GB no longer repeats the frame
command labels it spells the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #2027
* Redesign the home page as the File view (#2027)
* Match the File view with the accepted component design (#2027)
* Restore the Start subtitle and simplify the recovery icon (#2027)
* Integrate File view with main's shared UI containers
* Vertical history strip: left of the browser, compact rows, hollow-circle marker, collapsed rail hover
* Vertical history strip: seam handle to expand and collapse names, drag to resize with snap
* Vertical history strip: no empty gap below the transport
* Show the history seam arrow only on hover (#2028)
* claim: #2021
* Redesign the Assistant chat panel with shared UI components
* Show Assistant in the shared floating panel shell
* Extend floating Assistant to viewport height and shift navigation
* Dock Assistant before history and match docking preview bounds
* Align Assistant top margin with floating shell cards
* Extract a shared panel drag grip
* Rebuild responsive history sizing and three-way docking
* Share browser and History collapse hover styling
* Show the History title as soon as its text fits
* Animate stacked browser and History expansion and collapse
* Make panel folding responsive and independent of frame delays
* Let folding panel contents shrink continuously to header height
* Use four explicit History transport actions in every layout
* Resize the shared Browser and History column from either card
* claim: shared compact-mode containers (#2029)
* Centralize layout-aware UI containers and enforce their use
* Keep docked Assistant at the outer edge beside tool sheets
* Use shared surface policy for Assistant tool space
* Let tool sheets drag over shell panels while avoiding Assistant
* Update Parameters drag bounds assertion for shell overlap
* Keep dragged tool sheets below ribbon and workspace selector
* Enforce universal UI containers in mandatory repository checks
* Remove legacy report windows and require shared window composition
* Remove retired UI styling and require shared controls
* claim: compact layout preference (#2029)
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Navigation: opt-in free orbit and shared Normal to Selection
Preserve the complete reviewed feature, shared camera setting propagation,
rigid pivot behavior and focus/drag regressions from PR #1912.
Consolidate the prior main-integration commits before rebasing, so their
merge-resolution fixes remain in the linear feature history.
* docs: move free orbit help beside viewport controls
* Merge main into fix/solidworks-free-orbit
Camera animation is gone on main, and with it the orbit snap spring: the Shift
snap keeps its unsnapped orbit in orbit_free, which the free-orbit checks now read.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #3708
* Export Current View as DXF includes shown sketches (#3708)
The view export refused a design with only a sketch and left shown
sketches out when bodies were present. It now draws the sketches the
viewport shows (profile curves only: no construction geometry, points,
dimensions or constraints) on a SKETCH layer, one entity per curve.
Finished sketches are hidden behind bodies through the body-edge
occlusion; the active sketch is drawn on top, as in the viewport.
Sketch points use the same projection, budgets and cancellation.
The export is refused only when there is neither a visible body nor a
shown sketch curve; the dialog and the command share that check
(cmd::view_dxf_exportable).
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* Vertical history strip: left of the browser, compact rows, hollow-circle marker, collapsed rail hover
* Vertical history strip: seam handle to expand and collapse names, drag to resize with snap
* Vertical history strip: no empty gap below the transport
* Show the history seam arrow only on hover (#2028)
* Extract a shared panel drag grip
* Rebuild responsive history sizing and three-way docking
* Share browser and History collapse hover styling
* Show the History title as soon as its text fits
* Animate stacked browser and History expansion and collapse
* Make panel folding responsive and independent of frame delays
* Let folding panel contents shrink continuously to header height
* Use four explicit History transport actions in every layout
* Resize the shared Browser and History column from either card
* kernel: a blend runs along chains of several faces and lines closed rims up (#764)
A blend's chain may run along the boundaries of several faces (a tube's rim
along the halves of its wall): each edge continues from its own best-facing
face, read station by station. Before, a chain had to be the edges of one face,
so every rim of a revolved or cylindrical surface was refused.
Two closed chains blend from matching seams: the second chain's start (searched
by arclength, then narrowed) and direction are the ones that put each station
closest to its partner, so rims whose seams sit apart no longer twist. A
picked `seam` point on each chain fixes the start instead. A closed chain
against an open one is refused. Closed chains leave towards each other's
centroid, not a point on the rim.
Stations are read on the edges' own curves, not on the chords of the length
table (they sat up to the chord's sagitta inside a curved edge), and the
reported gap is measured to the curves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* kernel: closed blend chains run round the same way; Hermite strip and seam tests (#764)
The second of two closed chains runs round the same way as the first (by
their area vectors), so a picked seam turns the blend by just the angle
between the seams instead of folding it over. The nearer pairing decides only
when the loops stand almost at right angles.
Tests for the issue's gates: the blend between two offset box rims is the
analytic cubic Hermite strip (control points from the chord) and keeps the
top faces' normal along both seams; picked seams a quarter apart turn the
blend a quarter round.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* surface.blend: `seam` picks where each chain's stations start (#764)
A point on each chain, saved with the feature (one pending format change),
moved with the design like `align`, and refused when it is not two points.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* surface.blend: a test between two tube rims, their seams picked and saved (#764)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* Blend dialog: edges at each end, continuity and bulge per end, stitch (#764)
SURFACE › CREATE › Blend Surface opens a dialog: the edges the blend leaves
and the ones it arrives at, each end's continuity (G0–G3) and bulge, and
Stitch to both bodies. Edit Feature brings it back and keeps what the dialog
does not show (align and seam points). Labels in every locale catalog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* ROADMAP: M8 Blend runs along several faces, pairs closed rims and has a dialog (#764)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* kernel: a blend station on the vertex between two support faces is read on the neighbour (#764)
A station where a tube wall's two halves meet sits at a corner of one half's
parameters; with a leave direction that turns round the wall (tubes off each
other's axis) the shape could not be read there and the blend was refused. The
neighbouring chain edge's face holds the same point and reads it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* blend: review clean-ups (#764)
- ChainLine keeps one list of samples instead of four parallel lists.
- frames_on and boundary_gap take the chain's ChainLine instead of rebuilding it.
- A station is read on the neighbouring face only when it sits on the vertex the two edges
share, each face once, and each face keeps its own walk.
- The seam rule (a closed chain starts at it, an open one runs from the nearer end) lives in
ChainLine::start_at_seam; pair_with reuses the start of its both-ways search.
- support_faces projects with curveblend::project; loop_area sits with plane_through.
- surface.blend parses `align` and `seam` through one point_pair; the Blend and Ruled dialogs
share body_and_edges.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A line and a circle or arc can now be dimensioned to the circle's edge
(ConstraintKind::LineCircleDistance, saved as line_circle_distance): the gap
while the line misses the circle (0 is tangency), or how far the edge reaches
past the line when it cuts through (stored as `inside`).
Rebased onto main as one commit (the branch's own changes; its merges of main
dropped). Conflicts resolved: the test mod lines in cmd/sketch.rs (both kept,
sorted), and README.md, whose feature list main moved to docs/capabilities.md;
the line-to-circle dimension is listed there now.
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
Co-authored-by: jyviko <jyviko@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: loft guide rails (#201)
A loft follows one or two guide rails between its sections: stations are added between each two
sections, each the plain loft there moved so that the point a rail guides lands where the rail
crosses the station's plane — turned about the loft's direction and scaled (or stretched across
to the rail) with one rail, carried, turned and sized between two. The sections and caps stay
exact; the smooth loft runs through sections and stations. Solid and sheet lofts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* doc, engine: solid.loft and surface.loft take guide rails (#201)
`rails` (one or two {sketch, curves}) and `rail_fit` (scale | stretch), stored on Loft and
SurfaceLoft (one pending format note), parsed by the sweep's rail parser (now shared) and built
through the kernel's railed loft. Rails on a loft to a point, or on a surface loft with edge
sections or end continuity, are refused as not supported yet. The rails' sketches are walked as
the feature's references and their components placed like a sweep's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* ui: Rail, Second Rail and Rail Fit in the Loft and Surface Loft dialogs (#201)
The rail inputs and fit row the sweep dialogs have, shared through dialogs_sweep; Edit Feature
brings the rails back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* docs(roadmap): loft guide rails (#201)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* loft rails: review clean-ups (#201)
- Sweep and loft rails share one turn-and-size map (`sweep_path::rail_frame`).
- A station's middle and the loft's direction come from one curve through the sections'
middles (exact derivative) instead of two more plain-loft evaluations per station; at most
33 wires, so railed faces stay light.
- Nearest points on a section use `param_on` (kept only where the search comes nearer); the
size uses `Aabb3`; one B-spline builder; anchors keep their nudge.
- The railed and plain lofts share one path in `loft_with_rails` and `loft_sheet_with_rails`.
- The engine leaves the not-yet-supported refusals to the design's evaluation; both lofts start
their rails from the first section's first point.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* loft rails: refuse rails on sections with holes, with a test (#201)
Main's lofts now take sections with holes (#2447); rails shape only the
outlines, so a railed loft of rings is refused until the rails carry the
holes too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Fix large modeled threads and thin crest reconstruction
Helix stations follow the pitch (radial chord error under 1% of it, 48 to
720 stations), and the faceted rebuild retries at the BSP's precision when
the usual weld tolerance collapses a thin crest facet.
Rebased onto main as one commit (the branch's own commits touched UI files
that later moved to #2263 and #2264). Adapted to main's UnitVec3 thread
axis: `*k` in thread_groove and `*cylinder.axis` in the new flange test.
* Fix icon review revisions for same-timestamp edits
* kernel: trim keeps picked regions, mutual trim, curves swept along a direction (#767)
Trim moves to surface_trim.rs: TrimKeep::Side (the old behaviour) or
Regions (the connected pieces the points pick, parted where the tool runs
along an edge). mutual_trim cuts two one-face surfaces by each other's
surface, extending one that stops short when asked. SplitTool::Curves takes
a sweep direction; a closed curve's field is signed by inside/outside
instead of extending its end segments.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* kernel: classify display edges of a face with a closed-edge hole without a panic
A hole cut by a closed curve is a loop of one edge that starts and ends at
one vertex; mapping the face rebuilt that edge through a check that
panics on it (the guard caught it and dropped every smooth flag of the
body). Such faces are now left out of the ruled-surface test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* surface.trim: keep several regions, trim by projected sketch curves, mutual trim (#767)
keep takes a list of points (the regions they pick); curves: {sketch,
curves?, direction?} sweeps sketch curves onto the surface (along the
surface's normal: not supported yet); with + keep_with trims two
surfaces by each other, extend? meets a short one, stitch? sews the
kept pieces. Trimmed faces carry their lineage, so they are named
after the faces they are pieces of. New fields noted in a pending format file.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* Trim dialog: sketch curves as the tool, several keep points, mutual trim (#767)
The tool input takes sketch curves too; keep points are places (several
on one face add up); another surface with its keep points makes a mutual
trim with Extend to meet and Stitch toggles. Edit Feature brings it all
back. Labels in every locale catalog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* ROADMAP: M8 trim by projected curves, several regions and mutual trim (#767)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Reword comments, docs and package descriptions so they describe SolidCraft's own behaviour instead of comparing it to another product. The trademark notice, the commercial-CAD rule and the navigation preset name stay as they were.
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* feat(geom): surfaces through curve networks, and spline spaces to build them
Adds spline_space (clamped B-spline spaces, Hermite interpolation, exact
embedding by Bézier degree elevation and knot insertion, a monotone cubic
for reparameterising) and network (loft, Coons and Gordon surfaces through
curves in one or two directions, with G1/G2 cross-boundary conditions
against a neighbouring face). Part of #763.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* feat(kernel): boundary surfaces from sketch curves, 3D curves and edges
kernel::boundary_network turns sketch chains, 3D sketch polylines and edge chains
into network curves, gives G1 frames of the faces along open edges
(EdgeFaces), builds the B-spline face (sides split at chain vertices so a
join shares the body's edges) and joins it into a surface body by stitching.
G2 is refused for now (not supported yet). Part of #763.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(kernel): second derivatives of B-spline surfaces in the vendored truck-geometry
BSplineSurface::uuder and vvder multiplied the second differences by p
instead of p·(p − 1), as BSplineCurve::der2 does, so every surface of
degree p ≥ 3 (NURBS too, through its homogeneous surface) reported
1/(p − 1) of its second derivative: a cubic surface's curvature read as
half. This is why a G2 boundary surface on a cylinder measured half the
curvature it carries (#763). New tests hold both to finite differences
for degrees 2 to 5.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(kernel): G2 boundary surfaces against a body's face
The network always carried the face's curvature across a G2 edge; the
refusal came from measuring it with truck's halved surface second
derivatives (fixed in the previous commit). EdgeFaces now reads the
face's second fundamental form from the exact second derivatives
instead of differencing the normal. A new test holds the curvature
across a cylinder's edge to the cylinder's within 0.1%, also with a
sheared far curve; G3 is refused (a network holds up to G2).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* test(kernel): a boundary patch with straight corners measures its own area
A stadium's arcs meet its lines at 180°, so the Coons patch is singular
at its corners. From such a corner the reference mesher's boundary walk
ran onto the B-spline's extrapolation past its domain (a planar spline
passes through every point of its plane there), and the face measured
289 mm² for its 158.5 (#763). The vendored mesher's bounded projection
(nearest_projection, #2043) keeps the walk on the domain; this holds it
there, by the faces, the measuring mesh and the display mesh. The
display path (#1653) was never affected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(geom,kernel): three-sided boundary surfaces (one side collapsed to a point)
A network curve may be a PointCurve: the apex where the two sides beside
it meet. The curves through it cross it at the point itself, its row of
the net collapses there, and the kernel's face leaves that side out of
its loop (three edges, one vertex at the apex). One point per patch, as
a side; refused elsewhere, when it moves, or with a continuity
condition. Tests: a triangle and a quarter disc filled flat with their
analytic areas (40 mm², 25π), by geom and by the kernel's faces and
meshes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(doc): boundary surfaces through curve networks and loops of three or four
FeatureKind::SurfaceNetwork saves a network as `u` and `v` curves, each
a sketch chain (planar or 3D), a chain of a body's edges with an
optional G1/G2 continuity, or a point (the apex of a three-sided
patch), and an `operation` that can join the surface into the body of
its edges. A SurfaceBoundary of three or four sketch curves, refused
until now, builds as the flat Coons patch of its loop (three collapse
the side opposite the first curve). The format change is one pending
file; feature-walk goldens record the new variant's sketches, bodies
and points.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(engine): surface.boundary through loops of three or four and curve networks
The command keeps its loop form (two to four curves of one sketch; three
and four now build the flat patch of the loop, crown refused there) and
gains a network form: `u` and `v`, each curve a sketch curve id, a
{sketch?, curves} chain (planar or 3D), a {body, edges, continuity?}
edge chain (g1/g2 with the face beside it) or a {point} for a
three-sided patch, with `operation` new or join. Edits may move between
the two forms (timeline.redefine accepts the command now that it has a
dialog).
Tests: analytic areas of loop patches and of a hyperbolic paraboloid
bounded by four 3D lines (every mesh vertex on z = xy/10), a loft
across two sketches, G1 and G2 measured across a cylinder's edge with
inspect.continuity (angle < 0.1°; curvature jump 1e-16 with G2 against
0.027 with G1), 26 hostile networks refused without panicking, and u/v
added to hostile_params_never_panic.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(ui): Boundary Surface dialog
Curves and Cross curves take sketch curves and edges (picks that meet
end to end in one sketch or body are one chain); Continuity and
Operation (New Body or Join). Two to four sketch curves of one sketch
with nothing across are the loop patch; anything else is a network.
Edit Feature brings either back (per-side orders, crown and stations
the dialog does not show are kept). Strings in en, ja and zh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* docs: ROADMAP M8 and the bridge patch's notes for boundary networks (#763)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* test(oracle): a boundary surface through a loop, thickened (#763)
Case 83: four sketch curves (a square's three sides and a half circle
for its top) make one boundary surface, thickened 2 mm; analytic values
from tools/oracle-analytic/cases_surfaces.py (V = 2A, area 2A + 2P,
centroid by moments). Recipes gain boundary_surface, thicken and remove.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* refactor: boundary surfaces, review cleanups
Project onto the face once per derivative evaluation (the frame is
passed to natural() and reused by scale()), keep each track's
finite-difference step instead of rescanning its table, export the
kernel's edge-pick and chain caps and the default station count for
the engine, doc and dialog to share, map TooLarge spline errors to
KernelError::TooLarge, reuse the engine's operation parser, and skip
the dialog's sketch lookup when the picks are no loop.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
- motion.plot: joint values and a point's path sampled as the study plays (closed loops
following), with velocities and accelerations by finite differences, per step or per
second with a duration.
- motion.interference: the pairs of parts that pass through each other along a study, with
the first step, the step ranges, the depth and the shared volume; occurrences, against
or contact sets choose the pairs; bounded samples and work.
- Motion Study dialog: a Study box opens a saved study; a chart of a joint value or a
picked point with a cursor at the step shown (click to move there); Check collisions
with the steps shaded on the chart. ui.start motion.study takes study.
Grok Build is added as one more entry in the agent discovery list, over ACP, like the others. Thanks @cfaulkingham.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Adds File > Export > Current View as DXF: the visible bodies projected from the current camera onto 2D LINE/LWPOLYLINE entities, with hidden edges omitted or dashed.
Co-authored-by: cronos <19868002+crono2250@users.noreply.github.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
FreeCAD .FCStd and Rhino .3dm files open, insert and drop like STEP and IGES:
cadmpeg (Apache-2.0, pinned =0.6.1, native builds only) detects the format,
decodes it under its service resource caps, validates the model and writes it
as STEP AP214, which becomes an Import feature in a new component named after
the file, with the up and names options.
Only the fcstd, rhino and step codecs are compiled in (no default features).
ACIS is left out: cadmpeg's sat codec is a ShapeManager stream decoder.
native_cad.rs is the single importer seam. Self-made FreeCAD and Rhino box
fixtures, hostile-input, ZIP-bomb and cap tests, engine tests for the
component path; the browser build reports these formats as not supported.
A note under design format 23 says an Import's file can name these formats.
Co-authored-by: Jacob Oursland <jacob.oursland@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Motion links can carry a coupling (gear pair, rack and pinion, screw) whose ratio follows radii, picked round faces or pitch. Design format 23.
Co-authored-by: SychPL <SychPL@users.noreply.github.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Agent chat prototype: drive an ACP agent the user already has from a side panel
A desktop-only chat panel (off by default) that starts a coding agent over the
Agent Client Protocol and gives it SolidCraft's MCP server, bridged to the open
window through the token-protected control channel with the default folder
limits. It finds installed agents (Claude Code and Codex adapters, Gemini CLI,
Copilot, Qwen, OpenCode, goose) with version and login state, streams text,
tool calls and plans, shows the agent's permission requests, and when an agent
isn't signed in shows its own login methods without handling any credential.
Design notes and findings: docs/design/in-app-agent-chat.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* docs: say only what the end-to-end run showed
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: gate, one undo per message, docking, process groups, discovery polish
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: Settings → AI, several agents with a switcher, OpenAI-compatible endpoints, permission modes, toolbar button
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: translations, tool cards, Add agent dialog fixes, test agent saves on its own
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: third-party licences for the keychain crates; clippy
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: badge text from the theme tokens
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: Auto-allow model edits is the default permission mode
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Adds a bounded normalization path for PNG16 and ICC-bearing JPEG texture inputs, producing float RGBA with recorded color and orientation decisions.
Co-authored-by: 0xlillith <0xlillith@users.noreply.github.com>
New Body extrusions and Offset Face previews show successful intermediate distances from the same setup while a distance drag runs, then compute the latest one (tool previews keep streaming as before; errors still need exact inputs). The drag arrow and value box are painted from this frame's pointer, removing a frame of lag. Drag regression tests and a perf note added.