Commit Graph

354 Commits

Author SHA1 Message Date
NOWN-DEV ed64988d8f Joints: a round origin keeps its end when the face it opens onto gets other neighbours (#2760)
A round origin's end is kept by the name of the face across the rim. On
a face in pieces (a sheet split by a groove or a bend) that name lists
the faces round the piece, and when those change (a hole nearby moves
or goes) the name matched neither rim, so the end fell back to the
nearer end of the stored pick: a pick near one end of a thin wall that
the design moved past mid-wall turned a part through 180 degrees. The
end whose rim matches the name better now wins: the face itself, a face
merged into it, then a piece of it, then the same face by its stem.

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-18 21:16:01 -04:00
NOWN-DEV 6d410c342c Joints: origins on an edge of a face, at its middle or a corner (#2403) (#2404)
* Joints: a face or circle origin keeps its turn as the face tilts

A face- or circle-centre joint origin worked out its frame's x from the normal alone
(`Vec3::any_perp`), which switches axis where the normal crosses 0.9 along X: a part on a face
tilted past about 64° by a parameter spun a right angle about the face. New origins keep the x
they have when picked (`x`, component coordinates) and each solve lays it onto the face as it is
now, so the part tilts with the face without spinning. Origins saved without it are placed as
before.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Joints: origins on an edge of a face, at its middle or a corner

`joint.origin` and `joint.create` take `edge: [x,y,z]` (a point on an edge of a planar face),
with `on` (which face; default the larger planar face beside it) and `corner` (the end near that
point). The origin sits at the edge's middle (z out of the face, y into it) or at the corner (x
and y along its two edges into the face, right-handed whichever way the edges run). The edge, the
face and the corner's other edge are kept by name and found again on every solve, so a part set
40 mm in from a panel's corner stays there when the panel changes size; a name that finds nothing
leaves the joint out with the reason.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-18 18:10:28 -04:00
bherbruck a228a5830e Release 0.16.0
Version 0.16.0; the pending design-format changes are folded into format 27.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 18:10:44 +00:00
Artem Sushchev f5a868efda Fix red main after #2247: record its robustness seeds, and keep older designs' joins of split pieces working (#2540)
#2247 changed 16 robustness seeds (bodies N -> 1, and some seeds then build
different steps; seed 54's new shell fails on #2247's parent too). Recorded
on Linux.

Designs saved before #2247 that combined a split-off piece by name (tools
Posts, Posts (1)) failed on the missing piece and left both posts off the
case. A combine now skips a missing `X (n)` when `X` is a tool too or the
join's target, with a warning. Format note for the meaning change.
2026-10-18 13:10:09 -04:00
NOWN-DEV 8313c3468a Joint origins: resolve by the named face, keep a hole's end and the turn (#2186) (#2187)
Thanks @NOWN-DEV.
2026-10-18 13:08:23 -04:00
Loohi 9c7afb6076 Single hole follows its sketch point (#2110) (#2336)
Thanks @Loohi.
2026-10-18 11:35:15 -04:00
N3MI-DG 3eeb20d2bd Browser: hidden items grey out, and folders keep their own visibility (#2308)
Thanks @N3MI-DG.
2026-10-18 11:34:55 -04:00
Brazz 07708a4e2a Extrude: a taper composes with a start offset (#2312) (#2313)
Thanks @acbrazzl.
2026-10-18 06:18:43 -04:00
Artem Sushchev a4c4b411e5 Combine: a cut keeps a body joined from separate pieces in one body (#2247)
Thanks @H1D.
2026-10-18 06:02:44 -04:00
DuBearte e70bd52409 Extrude: a side drawn in collinear pieces is one face (#1788) (#1949)
Thanks @DuBearte.
2026-10-18 05:43:23 -04:00
selune 6422ef84d5 Drawing: share length display formatting (#2054) (#2086)
Thanks @0xlillith.
2026-10-18 00:29:15 -04:00
Irakli Kourtis 83c31d77c4 surface.boundary: surfaces through boundary curves and curve networks (#763) (#2129)
* feat(geom): surfaces through curve networks, and spline spaces to build them

Adds spline_space (clamped B-spline spaces, Hermite interpolation, exact
embedding by Bézier degree elevation and knot insertion, a monotone cubic
for reparameterising) and network (loft, Coons and Gordon surfaces through
curves in one or two directions, with G1/G2 cross-boundary conditions
against a neighbouring face). Part of #763.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* feat(kernel): boundary surfaces from sketch curves, 3D curves and edges

kernel::boundary_network turns sketch chains, 3D sketch polylines and edge chains
into network curves, gives G1 frames of the faces along open edges
(EdgeFaces), builds the B-spline face (sides split at chain vertices so a
join shares the body's edges) and joins it into a surface body by stitching.
G2 is refused for now (not supported yet). Part of #763.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(kernel): second derivatives of B-spline surfaces in the vendored truck-geometry

BSplineSurface::uuder and vvder multiplied the second differences by p
instead of p·(p − 1), as BSplineCurve::der2 does, so every surface of
degree p ≥ 3 (NURBS too, through its homogeneous surface) reported
1/(p − 1) of its second derivative: a cubic surface's curvature read as
half. This is why a G2 boundary surface on a cylinder measured half the
curvature it carries (#763). New tests hold both to finite differences
for degrees 2 to 5.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(kernel): G2 boundary surfaces against a body's face

The network always carried the face's curvature across a G2 edge; the
refusal came from measuring it with truck's halved surface second
derivatives (fixed in the previous commit). EdgeFaces now reads the
face's second fundamental form from the exact second derivatives
instead of differencing the normal. A new test holds the curvature
across a cylinder's edge to the cylinder's within 0.1%, also with a
sheared far curve; G3 is refused (a network holds up to G2).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* test(kernel): a boundary patch with straight corners measures its own area

A stadium's arcs meet its lines at 180°, so the Coons patch is singular
at its corners. From such a corner the reference mesher's boundary walk
ran onto the B-spline's extrapolation past its domain (a planar spline
passes through every point of its plane there), and the face measured
289 mm² for its 158.5 (#763). The vendored mesher's bounded projection
(nearest_projection, #2043) keeps the walk on the domain; this holds it
there, by the faces, the measuring mesh and the display mesh. The
display path (#1653) was never affected.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(geom,kernel): three-sided boundary surfaces (one side collapsed to a point)

A network curve may be a PointCurve: the apex where the two sides beside
it meet. The curves through it cross it at the point itself, its row of
the net collapses there, and the kernel's face leaves that side out of
its loop (three edges, one vertex at the apex). One point per patch, as
a side; refused elsewhere, when it moves, or with a continuity
condition. Tests: a triangle and a quarter disc filled flat with their
analytic areas (40 mm², 25π), by geom and by the kernel's faces and
meshes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(doc): boundary surfaces through curve networks and loops of three or four

FeatureKind::SurfaceNetwork saves a network as `u` and `v` curves, each
a sketch chain (planar or 3D), a chain of a body's edges with an
optional G1/G2 continuity, or a point (the apex of a three-sided
patch), and an `operation` that can join the surface into the body of
its edges. A SurfaceBoundary of three or four sketch curves, refused
until now, builds as the flat Coons patch of its loop (three collapse
the side opposite the first curve). The format change is one pending
file; feature-walk goldens record the new variant's sketches, bodies
and points.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(engine): surface.boundary through loops of three or four and curve networks

The command keeps its loop form (two to four curves of one sketch; three
and four now build the flat patch of the loop, crown refused there) and
gains a network form: `u` and `v`, each curve a sketch curve id, a
{sketch?, curves} chain (planar or 3D), a {body, edges, continuity?}
edge chain (g1/g2 with the face beside it) or a {point} for a
three-sided patch, with `operation` new or join. Edits may move between
the two forms (timeline.redefine accepts the command now that it has a
dialog).

Tests: analytic areas of loop patches and of a hyperbolic paraboloid
bounded by four 3D lines (every mesh vertex on z = xy/10), a loft
across two sketches, G1 and G2 measured across a cylinder's edge with
inspect.continuity (angle < 0.1°; curvature jump 1e-16 with G2 against
0.027 with G1), 26 hostile networks refused without panicking, and u/v
added to hostile_params_never_panic.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(ui): Boundary Surface dialog

Curves and Cross curves take sketch curves and edges (picks that meet
end to end in one sketch or body are one chain); Continuity and
Operation (New Body or Join). Two to four sketch curves of one sketch
with nothing across are the loop patch; anything else is a network.
Edit Feature brings either back (per-side orders, crown and stations
the dialog does not show are kept). Strings in en, ja and zh.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* docs: ROADMAP M8 and the bridge patch's notes for boundary networks (#763)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* test(oracle): a boundary surface through a loop, thickened (#763)

Case 83: four sketch curves (a square's three sides and a half circle
for its top) make one boundary surface, thickened 2 mm; analytic values
from tools/oracle-analytic/cases_surfaces.py (V = 2A, area 2A + 2P,
centroid by moments). Recipes gain boundary_surface, thicken and remove.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* refactor: boundary surfaces, review cleanups

Project onto the face once per derivative evaluation (the frame is
passed to natural() and reused by scale()), keep each track's
finite-difference step instead of rescanning its table, export the
kernel's edge-pick and chain caps and the default station count for
the engine, doc and dialog to share, map TooLarge spline errors to
KernelError::TooLarge, reuse the engine's operation parser, and skip
the dialog's sketch lookup when the picks are no loop.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-17 21:47:38 -04:00
JIJINBEI 2acc344aa4 Sketch: show open and untied profile ends (#2000) (#2001)
Thanks @jijinbei.
2026-10-17 18:52:12 -04:00
Koschtetnix 487aa64e10 Multi profile extrusion performance (#2064)
Thanks @Koschtetnix.
2026-10-17 18:30:52 -04:00
Pablo López cb857f1fa7 Rib/Web: grow along the sketch normal (#2056) (#2057)
Thanks @pablopeza.
2026-10-17 14:15:03 -04:00
fkirill f480898158 Extrude: join extensions of ribs on curved bases (#2059) (#2082)
Thanks @fkirill.
2026-10-17 13:33:21 -04:00
bherbruck 979614e60f Release 0.15.0 (#2039)
Version 0.15.0; pending design-format changes folded into format 26.
2026-10-17 11:55:05 -04:00
NOWN-DEV 09b3bd0e01 Sheet metal: machine a hole feature's drills in one pass, keep cuts after a text cut (#1979) (#1980)
Thanks @NOWN-DEV.
2026-10-17 08:52:19 -04:00
NOWN-DEV 8a2d142333 fix: a cut takes only its sketch, a join adds only it (#1310)
Thanks @NOWN-DEV.
2026-10-17 08:42:17 -04:00
NOWN-DEV 186555dbe9 Clearance report: overlaps, near pairs and nearest bodies (#1900)
Thanks @NOWN-DEV.
2026-10-17 04:54:39 -04:00
NOWN-DEV 2831426c51 solid.mirror: mirror bodies of placed components where they are shown (#1896)
Thanks @NOWN-DEV.
2026-10-17 04:08:22 -04:00
NOWN-DEV 9ce940b0b1 Evaluation: sketch and rename commands no longer slow down with the number of placed bodies (#1898)
Thanks @NOWN-DEV.
2026-10-17 04:08:18 -04:00
NOWN-DEV 9a4d936b7b fix: text cut into a large part stays on the exact 2D route (#1903)
Thanks @NOWN-DEV.
2026-10-17 04:08:12 -04:00
Irakli Kourtis 98ce6a4ee8 Sweep guide rails and two-rail sweep (#771) (#1806)
Thanks @jyviko.
2026-10-17 04:07:46 -04:00
Mateusz Sych f350c35414 Expressions: a mixed number such as 2 1/8" is 2.125" (#1802) (#1820)
Thanks @SychPL.
2026-10-17 04:07:19 -04:00
NOWN-DEV c7bb64dd74 feat: a slanted or curved edge across a sheet metal bend folds to a smooth curve of few pieces (#1799)
Thanks @NOWN-DEV.
2026-10-16 16:26:15 -04:00
H. Conrad bb13799246 Fix/clippy option zip (#1798)
Thanks @Ian-cmd-ops.
2026-10-16 16:26:11 -04:00
Mateusz Sych 920ea42fe1 Revolve: a partial turn's planar faces come out whole (#726) (#1718)
Thanks @SychPL.
2026-10-16 15:26:10 -04:00
HiroKenEz 19be7d27e7 Tapered join on a face: sew a whole face, keep the run-on inside the body (#1534) (#1763)
Thanks @HiroKenEz.
2026-10-16 13:26:15 -04:00
Mateusz Sych 31b2ddc0cf Split Body: the face a plane split cuts takes an attachment that follows the plane (#565) (#1746)
Thanks @SychPL.
2026-10-16 13:26:11 -04:00
Colin Faulkingham da65b4fc8c Thread: suggest cylinder size and expose metric diameter and pitch (#1759)
Thanks @cfaulkingham.
2026-10-16 12:26:23 -04:00
Mateusz Sych bf4551159e Split Body and Combine Intersect keep their faces' sources, so sketches attach (#565) (#1732)
Thanks @SychPL.
2026-10-16 11:26:17 -04:00
Mateusz Sych 6232fa33c2 Joints: cam and follower coupling (joint.cam) (#1734)
Thanks @SychPL.
2026-10-16 10:26:35 -04:00
bherbruck 2c020dbcbc Revert #1682 (three-axis milling) (#1715)
Thanks @bherbruck.
2026-10-16 09:02:19 -04:00
CypherNaugh_0x 737c9358d0 Add three-axis milling with independent CAM and Fusion validation (#1682)
Thanks @CypherNaught-0x.
2026-10-16 08:26:28 -04:00
DuBearte dd5278a402 solid.hole: position takes length expressions and follows them (#1678) (#1683)
Thanks @DuBearte.
2026-10-16 08:26:23 -04:00
midasdf bbd4f29ebb Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)
Thanks @midasdf.
2026-10-16 06:26:27 -04:00
rlartot 3126962cd4 A feature that names its body finds its named face there first (#1637) (#1643)
Thanks @rlartot.
2026-10-16 06:26:23 -04:00
bherbruck 9b2a40781c Release 0.14.0 (#1671)
Version 0.14.0; pending design-format changes folded into format 25.
2026-10-16 06:22:21 -04:00
midasdf 07da7f8065 Class-A surfacing 2/3: surface match, boundary patch and CV fairing (#1487)
Thanks @midasdf.
2026-10-16 03:26:20 -04:00
Karl Von Richter 9422853cf9 Feature mirrors and patterns: preserve replay and add Flip/Center placement (#1619)
Thanks @Karl-VonRichter.
2026-10-16 03:01:00 -04:00
bherbruck 26bf1af93b Sketch on an origin plane faces the side you clicked (#1587)
Fixes #1586.
2026-10-16 03:00:24 -04:00
DuBearte 6f270f6259 Split Body: a sketch line as the splitting tool (#1552) (#1592)
Thanks @DuBearte.
2026-10-16 01:35:15 -04:00
Karl Von Richter 371578a06f Feat/Sketch: associative pattern tools with independent directions and Flip/Center controls (#1601)
Thanks @Karl-VonRichter.
2026-10-16 00:32:32 -04:00
JIJINBEI 44968dbfe6 Feature fields: a type for each role (Expr, BodyName, FacePick…) (#1273)
Thanks @jijinbei.
2026-10-16 00:28:12 -04:00
DuBearte d624e0a171 Expressions: inch and foot marks (#1502) (#1578)
Thanks @DuBearte.
2026-10-16 00:27:40 -04:00
Mateusz Sych 4d862cd76c Joints: joint.reach (inverse kinematics), and a jointed part follows a drag (#1540)
Thanks @SychPL.
2026-10-15 23:58:34 -04:00
Irakli Kourtis fac3f96bdd Patch: G1/G2 to the faces beside the loop, general and N-sided loops, points (#759) (#1521)
Thanks @jyviko.
2026-10-15 23:07:24 -04:00
DuBearte 987f0be21e Sketch: infinite construction lines (#1359) (#1547)
Thanks @DuBearte.
2026-10-15 22:54:16 -04:00
Erikas a422fb1a4b solid.mirror: a plane's {origin} takes length expressions and follows them (#1492) (#1501)
Thanks @erkexzcx.
2026-10-15 22:37:08 -04:00