Commit Graph

29 Commits

Author SHA1 Message Date
JIJINBEI cdde7d62b2 Persistent names read by one parser; four misreadings fixed (#5814) (#5966)
* doc: persistent names read as their structure; joint.inspect splits an edge with a blend face first

`persistent_name::{FaceName, EdgeName}` parse a face or edge name once (blends, inner walls,
copies, pieces, numbered pieces, `~k`) and write it back as the same text, bounded against
hostile input. A suffix after a blend's edge naming a later feature belongs to the blend face.

joint.inspect split an edge at its first `|`, so an edge whose first face is a blend
(`F4:blend:F3:+x|F3:+z#[…]|F5:-y`) came back as a cut-off blend name and a string that is no
face. It now uses `EdgeName::parse`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: persistent names as typed values: features, roles, suffixes, a lexer and errors that say where

`FaceName` is a base (made by a feature in a role, a blend and the edge it rounds, an inner
wall, a body's face by index, other text) and its suffixes (copy, piece, numbered piece).
Roles are typed where the vocabulary is known (top, side:<curve>, +x, face:<k>, …) and kept as
written otherwise. The text form is lexed into tokens and read by the grammar in the module's
doc; a name that doesn't read says where and what was expected.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* names: read what made a face, its kind and its feature ids through persistent_name

The places that took a name apart by hand to find the feature that made a face, whether it is
a blend, a copy, a numbered piece or a wall, or to remap feature ids on copy, now ask the typed
name (`made_by`, `split_feature`, `is_blend`, `is_copy`, `is_numbered_piece`, `is_wall`,
`features`, `map`). A name that doesn't read falls back to the old text check.

- An offset of a face that only names a blend inside it (`F2:top#[F5:blend:…]`) is no longer
  taken for a fillet's.
- Copying a component remaps feature ids inside a piece's `#[…]` too.
- A shell's inner wall split by a later cut keeps the qualifier on the wall.
- joint.inspect finds the sketch curve of a copied side (`side:l1@F7.2`).

Finding a face by name (strip_piece, parent_piece) is unchanged: it reads a trailing
qualifier as the whole name's and moves once the text form says where it belongs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* engine: regression tests for press-pull on a wall that only names a fillet and joint.inspect on a copied side

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* names: an edge holds one face or more; made_by reads only the leading token

An open boundary's edge has one face and an edge several faces meet at has more, so an edge name
is a list of faces (a blend's own edge still takes two at most, as before). `made_by` reads just
the leading `F<n>:`, which every name a feature made starts with, so asking it of every face
each frame stays cheap. Names are read up to 1 MiB: a face engraved with text has piece names
past 4 KiB.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* persistent_name: split into lexer, parser, write, text and tests

No code changed; callers' paths stay the same (`pub use text::*`).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:48:26 +00:00
Colin Faulkingham 2e5924ed5e Preserve construction references when axes and points are renamed (#4419) (#4449)
* claim: #4419

* fix: preserve renamed construction references (#4419)
2026-10-24 00:24:51 +00:00
SS-EN 5d92ad1e23 Renaming a plane keeps its projections, canvases and hidden state (#4353) (#4354)
* claim: #4353

* Renaming a plane keeps its projections, canvases and hidden state (#4353)

timeline.rename only renamed the feature in other features' references. A sketch's
projection of a construction plane, a canvas placed on it and the hidden list keep it
by name too, so they lost it: the sketch warned that the plane no longer exists, the
canvas left the view and a hidden plane showed again. Document::rename_feature_keys
renames it in sketch links and canvases, as rename_body_keys does for bodies; the
selection follows in the command, and the hidden list in Session::refresh_from, so a
hidden plane stays hidden through undo and redo too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 14:22:13 +00:00
rlartot 31b41978fc Construction geometry on model vertices follows them when a parameter moves them (#568) (#2409)
Thanks @rlartot.
2026-10-19 16:11:38 -04:00
bherbruck 26bf1af93b Sketch on an origin plane faces the side you clicked (#1587)
Fixes #1586.
2026-10-16 03:00:24 -04:00
JIJINBEI 44968dbfe6 Feature fields: a type for each role (Expr, BodyName, FacePick…) (#1273)
Thanks @jijinbei.
2026-10-16 00:28:12 -04:00
Erikas a422fb1a4b solid.mirror: a plane's {origin} takes length expressions and follows them (#1492) (#1501)
Thanks @erkexzcx.
2026-10-15 22:37:08 -04:00
NOWN-DEV b6806b16cf feat: a sketch text's height, place and angle can be expressions (#1453)
A sketch text's height, place (x and y) and angle can each be an expression over the design's parameters, and the text follows parameter changes, undo and reopening. Closes #1362.

Co-authored-by: NOWN-DEV <NOWN-DEV@users.noreply.github.com>
2026-10-15 14:57:36 -04:00
Irakli Kourtis b4edf05373 Extend any surface: natural, tangent and curvature, up to a target (#760) (#1166)
Extend works on any surface: natural (continuing the face's own surface), tangent (G1 run-off) or curvature (G2 run-off), by a distance, up to a plane or face, or back to the surface's bounds, with neighbouring edges lengthened to meet. Untrim and Extend share face parameter-loop helpers. The new SurfaceExtend fields are noted under format 21. Closes #760.
2026-10-14 22:46:29 -04:00
JIJINBEI 86ea018d05 One walk over a feature's references (2/3, #876) (#988)
Part 2 of #876: one walk over the references a feature holds (the sketches it's built from, the features it names, the bodies it works on) replaces three hand-written matches, with a golden record covering every variant.
2026-10-14 11:14:25 -04:00
Irakli Kourtis 2b70ed7b72 Offset Surface: faces copied out at a distance, exact or fitted (#758) (#872)
Offsets picked faces along their normals into a new surface body: planes and cylinders move exactly, other faces get a fitted B-spline within tolerance, and offsets that would fold over are refused. Adds the SurfaceOffset feature (noted under format 18), the surface.offset engine command and an Offset Surface dialog.

Closes #758.

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
2026-10-13 22:34:16 -04:00
Irakli Kourtis 897b7d93b5 Surface Loft: sheets through open or closed sections (#847)
Surface Loft lofts open or closed curve chains, one section per sketch in pick order, into surface bodies. Adds the SurfaceLoft feature (format 18 note), the surface.loft command, a dialog with Edit Feature support, and kernel and engine tests.

Part of #757.
2026-10-13 21:07:16 -04:00
Irakli Kourtis aba57f1ca2 Surface Sweep: sheets carried from open curves and profiles along a path (#843)
Surface Sweep carries open curves and closed profile boundaries along a sketch path into surface bodies, with smooth walls along curved point paths. Adds the SurfaceSweep feature (format 18 note), the surface.sweep command, a dialog with Edit Feature support, and kernel and engine tests.

Part of #757.
2026-10-13 20:48:30 -04:00
Irakli Kourtis 2eb292dd4a Surface Revolve: sheets turned from open curves and profiles (#824)
Surface Revolve turns open curves and closed profile boundaries about a sketch axis into surface bodies, with cone apexes and sphere poles where a chain ends on the axis, and a closed shell made solid. Adds the SurfaceRevolve feature (format 18 note), the surface.revolve command, a dialog with Edit Feature support and analytic kernel and engine tests.

Part of #757.
2026-10-13 20:30:41 -04:00
Irakli Kourtis 753b0a2eab Unstitch and Reverse Normal (#856)
Unstitch takes a body's faces out as surface bodies; Reverse Normal turns a surface body's faces over. Both are saved in format 18. Closes #766.
2026-10-13 16:45:31 -04:00
Irakli Kourtis e540832626 Surface Extrude: sheets from open curves and profile walls (#815)
surface.extrude sweeps open curve chains and profile boundaries along the sketch normal into a surface body (walls only, no caps). Saved under format 17.

Refs #757

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 14:54:38 -04:00
NOWN-DEV 58af8accfa fix: a projected edge stays the edge that was picked when its body changes (#730)
A sketch's link to a projected edge now keeps the edge's persistent name and finds it by that name when the body changes, instead of taking whichever edge ends up nearest its point.
2026-10-13 12:06:13 -04:00
lucas-aguilar89 aa24d9f071 Pasted features act on the pasted bodies (#613) (#682)
Pasted features now act on the bodies pasted with them instead of the originals (#613).
2026-10-13 09:28:27 -04:00
NOWN-DEV af0440aaab feat: sketches on a sheet metal face attach to its panel (#474)
A sketch on a flat face of a sheet metal body was refused ("this face has no exact planar
source"), so the only way was a plane frozen in space. When the sheet changes (a flange's
angle, the thickness), the frozen sketch stays behind: a cut from it fails on the slanted
flange or leaves a blind pocket in the thicker sheet.

`sketch.create` with a face of a sheet metal body now attaches the sketch to the panel the
face belongs to. It keeps the face's name, `sheet:<body>:<panel>:<top|bottom>` (the panel is
the base or a flange's feature tag), and takes the panel's exact plane from its flat region
and fold each time the model is evaluated, so the sketch follows the sheet through parameter
changes, unfold and refold. Its coordinates are the flat pattern's (the bottom face's y
mirrored). A face that is gone is reported as a lost attachment, never replaced by the
nearest face. The attachment follows a renamed or copied body, shows as `sheet_face` in the
command result and as its own status in Redefine Sketch Plane. `fixed: true` still freezes.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 21:36:58 -04:00
bherbruck 296683229d Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)
* WIP deep rename (not for push)

* WIP2

* WIP3

* WIP4 wxs fix

* rustfmt

* Rename the remaining identifiers in merged crash-report code

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 17:17:01 -04:00
Iraklis Kourtis 08cf526fe2 feat(doc): persistent names follow the kernel's exact face history (#136)
Why: every reference a user makes to a face or edge (fillet and chamfer
edges, sketches on faces, shell/draft/offset faces, joints, appearances)
is stored as a name and found again after any upstream edit. Those names
were re-derived by sampling points of each face and voting, and pieces
of a split face were numbered by where their centres lay. After an
upstream edit that splits, merges, mirrors or shrinks a face, a fillet
or sketch could silently re-attach to the wrong face, and nothing told
the user. The kernel now reports exact history for its operations, so
names follow it and fail loudly instead of guessing.

- crates/doc/src/lineage.rs: a feature's kernel histories composed into
  one lineage over nameable operands (bodies before the feature, moved
  copies, shell cavities, tools named by role: sketch curve, cap, box
  side, imported face). Instrumented: extrude/revolve/sweep/loft tools,
  join/cut/intersect, lumps after a cut, fillet/chamfer, shell, draft,
  split face/body, pattern/mirror (bodies and features), combine,
  boundary fill, move/scale, offset/delete face, thread, import.
- crates/doc/src/history_names.rs: names from lineage; split pieces told
  apart by the faces only they touch (F2:top#[F2:side:l4,F4:side:l4]),
  merged faces answer to every name (aliases), lump bodies ordered by
  their faces' names instead of shell order.
- crates/doc/src/name_lookup.rs, piece_names.rs: references resolve by
  exact name, alias or bounding faces, else nearest piece with a
  warning; names worked out from geometry (operations without history)
  are reported when only geometry decided.
- Format 14: names stored by older formats get a legacy mark and are
  found as the build that saved them found them (some geometric names
  name a face history names differently: a tube's outer wall was named
  after its inner circle). New corpus file saved by 9a979cf.
- kernel: Body::lumps carries each piece's history over the whole.
- Adversarial tests: split, merge, mirrored twins, shrink to a sliver,
  moving cut with body pieces, history-less bodies, certified sketch.
- docs/book/src/dev/naming.md describes the real mechanism and why.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8
2026-10-12 11:52:53 -04:00
lillith df4c8a2994 Reconstruct constant-section meshes as parametric solids 2026-10-12 10:06:42 -04:00
bherbruck a6bb8fc924 feat: stabilize face attachments and closed spline workflows 2026-10-11 05:32:46 -04:00
bherbruck c1d819f235 feat: preserve body history and placed modelling workflows
Record ownership transfers in the timeline so earlier Join/Cut membership,
world placement, machining data and styles survive component moves, edits,
independent copying, undo and reopening. Preserve pending positions in history
snapshots and keep constructor transfers ordered during feature redefinition.

Retain shallow sheet pockets and exact planar intersection islands through
unfold/refold, with depth-aware flat previews and DXF export. Store explicit
3D wire coordinate spaces and migrate known legacy provenance without moving
saved points or analytic fits.

Infer unique eligible cylindrical Emboss targets, align Revolve manipulators
with actual extent geometry, and discard obsolete preview errors after input
correction. Certify constructed and immutable imported face styles using exact
source metadata while preserving legacy face names. Upgrade designs to format10
with bounded validation and geometry-preserving legacy migration.
2026-10-11 03:59:12 -04:00
bherbruck 0398a813c8 feat: strengthen sketches, feature editing, and independent assemblies 2026-10-11 02:44:31 -04:00
bherbruck 68271137a5 Split Face (FusionSplitFaceCommand): a timeline feature dividing the picked faces where a plane, another body's face (its surface extended) or a sketch's curves meet them, through kernel::split_faces; the solid is unchanged and the pieces take the face's name with #k. Rebase fixes: duplicate Chamfer and Combine specs; the Delete selection's face test expects Delete Face's refusal
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-09 12:47:56 +00:00
bherbruck 9f8915996d Sheet metal Fold (SheetMetalFoldCmd): fold the base panel along a sketch line (followed when the sketch changes) or two points on its face; angle, bend radius and K-factor from the rule; the bend zone (BA = θ(R + K·T)) comes out of the existing sheet so the flat pattern keeps its size; the line at the bend's centre, start, end or on the mould line; the side holding a picked point stays (default the larger), flip folds down; flanges on the moving part ride along
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck 656502b882 Clipboard: clippy
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 00:42:26 +00:00
bherbruck b5051b2744 Rib and Web (to the next face or a depth, flip), Emboss/deboss on planar faces (EmbossCmd), Replace Face onto a parallel plane or face, Align (point to point, face to face), Remove (SoftDeleteCommand), timeline Copy/Paste of features (independent copies: own dimension parameters and input names, references remapped, optional translation)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 00:42:26 +00:00