* test: cover malformed and unbounded recovery metadata
Add regression tests for oversized JSON, mismatched entry IDs, and
non-regular recovery metadata. These expose failures in the baseline
recovery reader before the implementation fix.
Signed-off-by: Taha Zarif <tahazarif380@gmail.com>
* fix: bound recovery metadata reads and validate entry identity
Reject oversized and non-regular recovery metadata before reading it,
and bound the read if a file grows after inspection. Require each JSON
entry ID to match its filename for orphan listing and recovery loading,
preventing unrelated save paths from being attached to a recovered design.
Signed-off-by: Taha Zarif <tahazarif380@gmail.com>
* Format recovery.rs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Signed-off-by: Taha Zarif <tahazarif380@gmail.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6394
* perf: group bodies, features and occurrences once in component.list
component.list searched every body, every feature (three times) and every occurrence (twice)
for each component, so its cost grew with components times contents. Bodies, features,
occurrences and children are now grouped by component once, keeping their order, and each
component reads its own groups. The output is unchanged.
The new test lists nested components and checks each gets only its own bodies, features,
sketches, occurrences and children, in timeline order.
* Dialog curve picks keep their sketch (#3726)
* Format
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Format
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Adapt context-menu test to Sel::SketchCurve's sketch field
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Path Flange picks keep their sketch too
Path Flange (#4096) landed after this PR and still looked its path up in the newest sketch with those ids.
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Every STL, OBJ and 3MF export meshed each body with a chord tolerance of
2e-4 of its size, with no way to ask for finer: a 3 mm hole in a 200 mm
part came out with about 14 sides. file.export and file.save_mesh take
`quality`: standard (as before, the default), fine (5e-5) or finest
(1e-5), and Save As Mesh has a Quality row, remembered like its format.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5024
* Hole: refuse a position that isn't on a face (#5024)
`solid.hole` took any `position` and drilled from the nearest face, so a
point 1 mm past a box's side was accepted and cut a hole across the edge.
A position given as a point (numbers or length expressions) must now lie on
a face of a body, within the same tolerance the plastic features use for
their placement (the check is shared with them). Holes at sketch points are
unchanged.
* Hole: a position over the mouth of a bore or opening of a planar face is on that face (#5024)
A counterbore is centred on an existing bore, in the plane of the face round it.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #5329
* Update Links: show which linked design it reads, off the window thread (#5329)
Update Links read and rebuilt every linked design on the window thread, so the
window froze, with nothing on screen, until it finished. From the toolbar it now
runs as a file operation: off the window thread, with the overlay naming the
linked design being read (cover (2 of 3)), its rebuild step and progress, and
Cancel. The assembly stays as it was until the update is in, and it lands as one
undo step. The command reports each design through doc::progress::item.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5938
* Edge flange: height measured from the outer sharp, the inner sharp or the bend tangent (#5938)
An edge flange feature takes height_from (outer, inner or tangent) in sheet.flange and Height From in the Flange dialog, saved only when it is not the outer sharp. A height shorter than the bend takes is refused with the smallest height that fits.
* Edge flange: material outside and tangent bend positions (#5941)
An edge flange's position can now be material_outside (the inner virtual sharp on the edge) or tangent (the bend's outer face tangent to the edge's face), in sheet.flange and the Flange dialog. The bend starting at the edge was already the outside position, which now also answers to bend_outside.
At launch the app adds the solidcraft entry to each installed AI client off the window thread,
names newly connected clients once, and refreshes a stale path. Settings > Assistant has
"Make SolidCraft available to AI apps on this computer" (on by default); off removes the entries it
added. Entries the user changed are left alone; automation runs never touch the files.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #2926
* Edit Feature: a primitive in a moved component keeps its placement (#2926)
Edit Feature passes a primitive's placement (corner, base, axis, center)
through as saved, in its component's frame, as timeline.inspect reports it.
timeline.redefine read it as a world point and mapped it through the
component's placement, so in a turned component the edit moved the
primitive: in the Hinge Assembly, Leaf B's rod flipped and the revolute
joint put the leaf on the other side.
A placement equal to the saved one now stays as saved; a new one is still
mapped from the world.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TBKuBKHW3LfC7CMW1HYpwL
* Move the #2926 tests up in frames_tests.rs
They sat at the end of the file, where main has since added the #6000
test; moving them avoids the merge conflict.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
solidcraft-cli mcp setup (alias install) and Help > Connect AI assistants edit each installed
client's own configuration in place, with this program's absolute path: OpenCode, Claude Desktop,
Claude Code, Cursor, Codex, Gemini CLI, Copilot CLI, Windsurf, Zed and VS Code. Only the solidcraft
entries change; a stale path is refreshed and an entry the user changed is left alone.
Plain mcp keeps looking for the app while its headless session has no work, and says on every
tool result that it is headless when the app was not found.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4094
* Sheet metal: Path Flange, a chain of bends on an existing sheet edge (#4094)
Path Flange (`sheet.path_flange`): sketch an open chain of lines across a sheet edge, pick the
edge and one line; each line becomes a flange as long as the line and each corner a bend, one
feature and one body. The edge flange takes further bends (`then`), each on the far edge of the
one before, and the Flange dialog shows them as rows with a bin each.
* claim: #4968
* Sheet metal rules: bend angles as the included angle (#4968)
A sheet metal rule's angle_display (bend, the default, or included) sets
how the DXF bend notes read each bend: a 58° bend is B1 UP 122° R1 under
an included rule. The bend table always gives included_angle_deg beside
angle_deg (CSV and JSON). Set in sheet.manage_rules and the Sheet Metal
Rules dialog, listed by sheet.rules; the flange angle stays the bend angle.
* Bend table: the included angle as the CSV's last column, so the columns before it keep their places (#4968)
A test also covers a body whose base flange names its rule, which keeps that rule's notes whichever rule is active, and a bend down.
* Sheet Metal Rules: Angle Display reads Bend or Included, so the choice fits its box (#4968)
The rule editor's row contract lists the new row and the key the dialog sends.
---------
Co-authored-by: begsaquib <saquibbeg4444@gmail.com>
* claim: #5580
* fix: follow named lid edges after parameter changes (#5580)
* fix: initialize viewport test frame tints
* Drop duplicate tint fields in gpu view tests (main already has them)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Dimension: point or circle to the edge of a circle or arc (#4064)
Adds PointCircleDistance and CircleCircleDistance (edge-based, like #1863):
solver, constructive seed, drawing, command wiring, tests, UI scenarios and docs.
Saved designs gain two constraint kinds, in one pending format file.
Fixes#4064.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Sketch Dimension scenario: pick the circle at its top edge (#4064)
The bottom edge sits under the Dimension tool's status hint in the scenario window, so the second click never reached the tool.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #5467
* Warn when a design is open elsewhere or changed on disk (#5467)
The desktop app keeps a lock file next to each open design
(.~<file>.lock: computer, user, version, opened and refreshed times),
refreshes it every minute and removes it on close; a lock not
refreshed for three minutes is stale and ignored. Opening a design
that another SolidCraft has open asks: Open Read-Only, Open Anyway or
Cancel. A read-only design saves only to another file.
A design remembers its file's size and modification time when it is
opened or saved. Save over a file another program or computer changed
since asks: Save a Copy (the default), Overwrite or Cancel.
Programmatic calls never ask: doc.open reports open_elsewhere and takes
read_only, and file.save over a changed file returns an error until it
is given overwrite: true. ui.documents answers both questions.
* claim: #5336
* Editing an Extrude or Revolve shows its sketch (#5336)
A finished sketch is hidden once a feature uses it, and it stayed hidden
while that feature's dialog was open for editing, so no other profiles
could be picked. The session now holds the sketch of the feature being
edited; the edit dialog sets it while it is open and clears it however
it closes, and that sketch is drawn without changing stored visibility.
A Home picture still being drawn by the detached saved-thumbnail thread
could be on the GPU as the process exited, and the process died with
SIGSEGV inside the graphics driver. capture::close stops new pictures
and waits for those in flight (the app calls it in on_exit), and
dropping SolveApp waits for the Home picture threads it started.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: post-merge Render review corrections (#5493)
* fix(render): gate bundled studio tests in isolated engine builds (#5493)
Addresses jyviko review comments on #5494: compile the two positive payload-dependent regressions only with bundled-render-library. Keep all assertions and the explicit feature-absent refusals. Reproduced 5 pass / 2 fail before the fix; isolated default, CPU without pack, and CPU with pack tests plus strict scoped Clippy and repository checks pass. No production or CI configuration changes.
* Test: a text on a path follows the path when a parameter moves it
A construction line placed by a dimension that reads a parameter, and a text laid along it: after
the parameter changes the line has moved and the text has not. It follows one evaluation late.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
* Sketch text: a text on a path follows the path in the same evaluation
Problem: texts are laid out with the sketch's links, before the sketch is solved. A solve that
moves the curve a text runs along (a path placed by a parameter) left the text where the path had
been before the change, so it followed one evaluation late.
Solution: after a solve that keeps the sketch's orientation, every text that runs along a curve
of its sketch is laid out again along that curve as the solve left it; a text that no longer lays
out adds its warning.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Test: an offset plane on a sheet flange's face follows the flange
An offset plane on the inner face of an edge flange, picked by body and index as model.faces
lists it. When the base gets wider the flange moves along x and the plane stays where the face
was picked; a sketch on the same face follows it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
* Construction: a plane on a sheet's flat face follows the face
Problem: a construction plane on a flat face of a sheet body resolved the stored plane, which is
only where the face was when it was picked. When the sheet changed the plane stayed behind, while
a sketch on the same face follows it by its sheet face name.
Solution: a construction plane on a sheet's flat face resolves that face's plane as it is now, as a
sketch on the face does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The parts of one STEP assembly import share their face names, and each
part's body stays where the file has it, placed in its component by an
offset. A joint origin on a named face (a hole's centre, a face's
centre, an x reference by face, the end a round origin takes) looked the
name up on every body of the design and compared the pick, in the
joint's component coordinates, with each body as it lies. Another part's
face of that name could lie nearer, and the joint resolved on that
part's face: a pin jointed into one plate's hole landed where the other
plate's hole is relative to its plate.
named_face now looks only at the bodies of the joint's component, each
in its own coordinates, a face the name finds exactly before a piece of
it or a face it was merged into, then the nearest. The design-wide
lookup stays for a face whose body has gone to another component.
named_round, x_axis, pin_end and end_faces take the component, as
face_name_at and round_end_at already do.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A joint origin at a face's centre (`joint.origin {face}`, `Snap::FaceCenter`) was the face's
area centroid, holes included. A hole cut into that face, moved or suppressed therefore moved
every part held at the face's centre, though the face's outline stayed where it was: on a
200 x 100 plate with a 20 mm hole, 0.31 mm for each 20 mm the hole moves and 0.62 mm when the
hole, 40 mm off the middle, is suppressed.
On a planar face with holes the origin is now the middle of the area the face's outer boundary
encloses (`outline_centre`: the face's triangle sides that no other triangle of the face runs
back along, corners matched by place, chained into loops in the face's plane; the centroid of
the loop enclosing the most area). A named face (`NamedFace::plane`) and the planar face
nearest a point (`nearest_plane`) both use it. A face without holes, or one whose mesh gives no
clean outline, keeps its centroid as before.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A parameter change evaluates the model and solves the joints inside the
command (so that it can refuse a value that breaks a sketch), and
`Session::execute` refreshes again after the command and solves every joint a
second time, although nothing has moved since. On 40 small parts jointed
rigidly to a plate's holes (half of the joints lifted by an expression),
changing the lifts' parameter took 0.85 s on main and takes 0.45 s now;
changing one part's thickness, 1.96 s and 1.52 s (CLI, medians of 5 runs).
The session now keeps the design the joints were last solved for, as the
solve left it, and the model that solve read. A refresh that finds the same
model, and a design that differs from the solved one at most in its features,
leaves the joints as they are: the joints read features only through the
model, and a value edit stores the new solutions of the sketches it drove
after its solve, so its design is a new one by the time of the second
refresh. Placements and bounding boxes come out identical.
Test: `a_parameter_change_solves_the_joints_once` counts one solve per change
(two before), checks the jointed part still follows the hole, and that a
captured move of a jointed part is still solved back.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
An edge joint origin looked its edge and face up in the body's own coordinates with the pick in the component's,
and returned the frame in body coordinates. On a body placed by an offset (an imported part's bodies are) a pick on
the edge where it is shown found no edge ("joint origin: no edge there"), or the origin sat away from its edge by
the offset. Edge origins now take the picks into the body's coordinates through the inverse of its offset and place
the frame back by it, as named faces and round origins already do. A body without an offset is unchanged.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5352
* Sketch: circles and arcs honour construction (#5352)
sketch.arc.center_point, sketch.arc.three_point, sketch.circle.two_point,
and sketch.circle.three_point accepted construction: true but drew normal
geometry. They now mark the new curve as construction, like lines and
rectangles, and their parameter docs list construction?.
* claim: #5562
* Intersection curves: a point that won't project no longer panics (#5562)
A quarter disc at a box's corner revolved 360 deg about the box's edge and
cut (a hemisphere whose pole sits on that edge) panicked in truck at
intersection_curve.rs:133: dividing one of the cut's intersection edges
met a point that projects onto neither surface, and the hinted
projection's fallback called subs, which unwraps that same failed
projection. The guard turned it into a failed cut and a crash report.
Now the leader's point stands in, the division stops there, and the
failure is recorded (truck_geometry take_projection_failure). truck-shapeops'
face division checks it after dividing an edge and gives up, so the
Boolean attempt fails as quickly as the panic made it and the kernel goes
on to its other tries: carrying the approximate points on instead made one
kernel test (equal bores crossing) run for minutes. On this design the cut
still fails with an ordinary error, leaving the box whole; nothing panics.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6000
* Sketch: explicit planes take a frame, world or component (#6000)
sketch.create and sketch.redefine take frame: "world" (the default,
as before) or "component" for an explicit {origin, x_dir, y_dir}
plane. The reply says which frame the plane was read in, with a note
when a world plane goes into a moved or turned component. frame on a
named plane or a face is refused: those are where they are.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
With Start set to From Object (or a start offset), the automatic
operation was still decided from the profile: the engine probed for
material just past the profile plane, and the dialog kept the operation
it had latched before the start changed. A profile on a plate's top,
extruded 14 mm down from the plate's bottom face, came up as Cut instead
of Join. The engine now probes from the extrude's start (and, to an
object, reaches from there), and the dialog decides the operation afresh
when the start changes.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6145
* Windows: a stuck icacls no longer freezes SolidCraft when it writes the control token (#6145)
Writing the control token runs icacls to drop the file's inherited
permissions, and waited for it without a limit. On some computers the
new icacls process stays suspended, so connecting an agent froze the app
for good. It now waits at most 5 s; an icacls still running then is ended
and the token written anyway, into the user's own local app data folder.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Test: a plane through a construction axis follows it in a design with a component
Two offset planes, the axis where they meet and a plane through that axis. Once the design has a
component, a parameter change fails the last plane with "unknown construction `Ax`".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
* Construction: the root's constructions are found once the design has a component
Problem: once a design has a component, the root's construction features are built in the model
placed in the world. That state carried each component's bodies, sketches and threads, but not
its construction planes, axes and points, so a construction built on another one failed on every
evaluation with "unknown construction".
Solution: the world state carries each component's constructions where the component is placed
(moved by its occurrence's placement, as the bodies are).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Test: configuration rules given together are checked with all of them in place
Suppressing a box and the cut on it: the box's rule alone fails the row check (the cut has
nothing left to cut), so the two rules can't be added one at a time. Given together they pass,
in one undo step; a bad rule among them adds none.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
* Configurations: config.rule takes several rules at once and checks the rows once
Problem: config.rule adds one rule and checks every saved row with it. Rules that only hold
together (suppressing a body and the cut on it) could not be added at all: the first one alone
fails the check. A design with many rules also rebuilt every row once per rule.
Solution: config.rule takes `rules: [...]`: each rule is added or replaced as with `rule`, then
the rows are checked once with all of them in place, in one undo step; a rule that fails
validation adds none. The docs describe it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Test: joint origins take a long piece name
A face split by a cut whose edge runs in many segments is named after every face around its
piece, several hundred characters. joint.origin refused such a name, as model.faces gives it,
over 512 characters, both for a face centre and as a round end.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
* Joints: an origin takes a face name as long as the face's piece name
Problem: joint.origin and joint.create took a face name (a face centre, a round end, an x
direction) only up to 512 characters. A face that a cut split is named after the faces around its
piece (`<face>#[<face>,…]`), which reaches several hundred characters when the cut's edge runs in
many segments (a slot with a zigzag edge, a cut of text), so a name model.faces gives was refused.
Solution: the face names a joint origin takes are capped at 16384 characters (MAX_FACE_NAME),
still a bound on hostile input.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sheet metal: test that an unfolded sheet's flat face is named after its base at every size
An unfold keeps the base in place and lays the flanges out beside it; the flat
face spanning them and the bend strips is the base's face. It was named after
the unfold whenever few of its sample points fell on the base (the bend strips
are many small triangles, the base two big ones), and that changed with the
sizes: a size change renamed every top and bottom face the refold made of it,
and joints and sketches on them lost their faces (40 of 85 joint ends of a
real part after one change). The test unfolds and refolds a base with three
flanges at two flange heights and wants the flat face and every refolded
panel face named after the base.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
* Sheet metal: the panel an unfold or refold keeps in place names the face it is part of
A face a sheet feature made is named by where its sample points lie on the
input's faces: in place, else taken back through the folds. Only nine points
per face are sampled, triangle centroids picked by index. An unfolded sheet's
flat face spans the base, the flanges laid out beside it and the bend strips
between them; its bend strips are many small triangles, so most samples fell
on them. Those lie on no panel, and one of them made the fold fallback give
up for the whole face. The face was named after the unfold, and the refold
passed that name to every top and bottom face; which way it went changed with
the part's sizes.
For a sheet feature that moved panels, a face the plain vote leaves unnamed
is now looked at closer (up to 256 points): if a part of it lies in place on
the body's own face before (the panel the feature kept), that face names it.
Else the fold fallback votes over the points that can be taken back, when at
least half can, instead of none when one cannot. Other features, and faces
the plain vote names, are named as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Test: a switch parameter alone switches the features its rules suppress
Configuration rules that switch features' suppression from a parameter (drive_suppression when
`on` = 0) ran only on config.activate: a plain parameters.change of the switch left the features
as they were, so a script had to activate a row for every change. Red until the fix.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
* Configurations: a parameter edit runs the suppression rules whose condition reads what changed
Problem: configuration rules ran only when a row was activated or a configuration edited. A
design that switches features on and off by a parameter (a rule that suppresses a feature when
the parameter is 0) did not follow a parameters.change of that parameter.
Solution: parameters.change (one parameter or several) runs, before the rebuild, the enabled
rules that switch a feature's suppression and whose condition reads a parameter whose value
changed (or a feature switched earlier in the same pass), in their order as activation applies
them, and lists them as `switched`. Driven parameters and restrictions still wait for a
configuration edit or activation; a rule whose condition reads nothing that changed leaves a
hand-set suppression alone; a rule that cannot be evaluated is skipped and never blocks the edit.
One undo step with the edit. docs/configurations.md says so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A live drag frame shares one work budget between its held solves, but
only their cluster decomposition was charged. The numerical solve (LM)
ran outside it, so in a larger sketch where the geometry can't follow
the cursor, one frame ran 64 failing held solves of about 150 ms each:
10 s per frame (68 points, 50 curves, 58 constraints, found by
randomised sketch editing). The frame budget now also counts the LM
work of its held solves, without stopping a solve: once a frame's share
is spent, the drag takes no more steps in that frame, keeps what it
reached and asks for the next frame (retry), as the viewport already
handles. The same drag now takes about 0.3 s per frame. Solves outside
live frames are unchanged.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Placing a design's bodies asked each body's owning component once per
placement, and each answer searched the features for the one that made
the body: placements x bodies x features on every command, twice (the
world state and the frames that map a command's picks into components).
Document::model_body_components answers for all bodies at once, and
world_state_reusing and body_frames_with_source use it. The engine's
frames now work out the per-body table only when a command picks a body
or names one; most commands pick none.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A standard part (a nut, washer, bolt, screw, pin or bearing) drew its sketches without
constraints, so each was left with free degrees: 3 for a hex, 8 to 12 for a revolved outline.
A check of a design that holds parts listed every one of them as not fully defined. The part
builder now fixes each sketch's points and curves before finishing it: the outline is the
part's size, and a resize builds it again the same way.
Claude-Session: https://claude.ai/code/session_01XhgPofrmFDeLvMhar6Wsqw
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
document.inspect with measure (what inspect_design and the
solidcraft://design resource ask for) measured every body one after
the other, and again on every call: on a 1,280-body design each call
took 25 to 60 s. It now measures them on all cores, as
inspect.measure does, and each body keeps its measurement in a cell
shared by its clones (with the body it was measured on, as the outline
box is kept), so a design inspected again measures only the bodies that
changed. Placements taken as before keep their placed body's cell too.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>