fbe778a1e89afd49e1cd5145dc4eacdbbfd1f0ae
36 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
93a2922c5e |
Display plans and the model cache for large STEP assemblies (#2814) (#4021)
* STEP import: mesh band faces that wrap around a closed surface correctly Fixes two related bugs that caused SolidCraft to fail to mesh a face wrapping all the way around a closed, non-periodic surface (a revolved ridge band, or a tube-shaped B-spline surface): a missing face, a folded/self-overlapping triangulation, or a hole in the rendered body. 1. Ring edges that run slightly off their surface. STEP files write a surface and the curves bounding it to the file's own declared uncertainty, so a ring edge can legitimately sit a few micrometres off the surface it bounds. The code finding where a ring edge crosses the planned split line compared against the edge's raw (off-surface) point using a hardcoded tolerance far stricter than the file's own precision, rejecting a valid cut. Now matches against the point on the surface directly below the ring crossing, respecting the file's declared tolerance. 2. Closed B-spline surfaces, their slits and their slivers. truck only treats the rotation of a revolved surface as periodic; a face on a B-spline surface whose control net closes on itself (a tube) wasn't recognized as wrapping around at all. This produced a folded face, a hole (a boundary loop landing a full period away from where it should cut), and one near-zero-width sliver face costing the entire body its tessellation plan. Adds periodicity detection for closed B-spline surfaces, period- aware hole-loop alignment, dropping of zero-width slit boundaries, and isolating a too-thin-to-triangulate face so it no longer takes the rest of the body down with it. The GPU shader's periodic wrap mirrors the CPU math so the two don't drift apart. Regression tests: band_faces_split_when_ring_edges_run_off_their_surface, band_face_with_a_zero_width_slit_is_still_meshed, a_sliver_face_too_thin_to_triangulate_does_not_cost_the_body_its_plan. Ablation-tested: disabling either mechanism in (2) reproduces its target test's original failure message while leaving the other test unaffected. * STEP import: mesh the band's split faces, not just split them jyviko asked whether a band wall missing from the interactive app's render was a shading issue or a genuinely missing face. It was missing: the ring- edge split fix made the band's topology correct, but plan_face still produced zero triangles for the two new sub-faces. Two causes, both in plan_face (crates/kernel/src/tess/mod.rs): 1. The tolerance for how far an imported boundary may lie off its surface was tied to the requested mesh's chord tolerance instead of to the body's own size. A finer display tolerance could then reject a boundary a coarser one had just accepted, so the face would drop out exactly when zooming in on it. 2. Near a sharp corner of this flat-panelled band, several boundary points that are legitimately a few micrometres apart (within the STEP file's own declared precision) all projected onto the same surface point. The boundary loop then repeated a point in (u, v), which a triangulator can't follow, so the face's plan failed outright. One face without a plan costs the whole body its plan, and the fallback mesher can't handle a closed B-spline surface either, leaving both halves of the split band with no triangles at all: present in the topology, invisible in every renderer, and absent from the body's volume. Fix: scale the off-surface tolerance to the body's own extent (new Rules::extent), and collapse a run of boundary nodes that land on the same surface point to one (drop_collapsed) before triangulating. Regression test additions to band_faces_split_when_ring_edges_run_off_their_surface: the body's volume now matches the analytic pentagon prism (was a third of it - only the top cap - before this fix); display_plan leaves no face without triangles from coarse to fine tolerance; and the actual tolerance and facet angle the viewport draws with gives the split band its full lateral area on both halves. Confirmed on review_band_big.step, the fixture behind the review screenshots: volume's relative error against the analytic pentagon prism drops from 1.4e-4 to 4.1e-6, and the band wall now occludes the floor grid behind it in a snapshot the same way the top and bottom caps always did. Full kernel suite: 739 tests, 0 failed. * STEP import: hold an imported boundary to the file's own tolerance, not the part's size jyviko: the off-surface acceptance added in the last commit (rules.extent * OFF_SURFACE) scaled with the part, so a 2 m part silently accepted a boundary 2 mm off its surface while a 20 mm copy of the same part accepted only 0.02 mm. A STEP file's own declared uncertainty does not grow with the part, so the bound shouldn't either. Body gains boundary_tol: Option<f64>, Some(file's declared tolerance) for a body read from STEP (crate::step_in::Units::tol, already used by the ring-split fix in split.rs), None for anything this kernel built. It's set before the import's own unmeshed-face check runs, and carried over by the two face-split operations that re-cut an imported surface (splitface.rs, outline.rs), since the file's uncertainty still describes those boundaries afterward. plan_face's accept now reads: the file's own tolerance when the body declares one, or the old chord-tolerance/extent bound otherwise. The old bound's tol * 10.0 term had to go too, not just the extent term: at a 2 m part's typical display tolerance that term alone is ~20 mm, nearly ten times the extent bound jyviko objected to, so keeping it would have left the exact 2 m/2 mm example still silently accepted. Two new tests in step_in/tests.rs: - band_faces_split_when_a_scaled_copy_runs_off_its_surface: the same band fixture at a realistic 2 m scale with the same absolute slop and declared uncertainty as the small one, meshes the same way at every chord tolerance from coarse to fine. - off_surface_budget_follows_the_file_not_the_part_size: the actual regression. The same off-surface error is accepted or refused the same way whether the part is 20 mm or 2 m; a 2 mm error against a 1 µm declared uncertainty is refused at both sizes now (accepted at 2 m under the old bound, refused at 20 mm - that asymmetry was the bug). Checked at both a coarse and a fine display tolerance. Known gap, not fixed here: a STEP-imported body saved into a .solidcraft design and reopened loses boundary_tol (native.rs's decoder has no field to read it from) and falls back to the old extent-based bound on reload. Today's design format has no concept of this value at all; persisting it is a real format change, out of scope for this fix. Full kernel suite: 776 tests, 0 failed. clippy -D warnings clean. * Display plans for STEP threads and pointed ends (#3847) Three faces cost a threaded or pointed STEP part its whole display plan, so it was drawn from the reference mesh: cracked, faceted, and never refined up close. - A loop through a pole (a cone's apex on the boundary) seemed to wind around the surface: the jump at the apex, unwrapped to the nearest copy, was arbitrary. The loop is turned to end where it leaves the pole, so the step that closes it is an ordinary one (`seam::close_through_pole`). - Projection onto a spline with hundreds of spans (a helical flank) restarted from a 16 x 16 grid and settled on another turn; it now starts from two points per span, capped. - Sag refinement no longer inserts a point exactly on a boundary side, which split the side and failed the face. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * tess: a refused face's edges are divided finer and it is planned again (#2814) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * tess: sliver faces plan empty; a face no method plans is filled flat from its nodes (#2814) A face whose boundary runs out and back along itself (two edges between the same vertices, a rounding apart, as STEP files write slivers) encloses nothing and is planned with no triangles. A face still refused after its edges are divided finer (a cusp, a sliver whose sides sag across each other, a small cap at a pole) is filled flat from its shared boundary nodes, so the rest of the body keeps its display plan instead of falling back to the reference mesh. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * display mesh tests: a rim the chord tolerance leaves a line is divided again (#2814) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * portable B-rep: up to 8192 control points along a spline direction (#2814) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * solidcraft-cli: --debug logs what the engine reports to stderr Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * STEP import: a spline written over a tiny parameter range is read over one (#2814) Some writers parameterize splines over a few millionths (a humanoid robot's edges span 5.4e-6). The kernel tells parameters apart only to 1e-6, so over such a range it evaluated the curve's end wrongly, and trimming an edge to its vertices dropped a control point: the bodies could not be stored exactly and the whole model cache was left out of the design. The knots are now stretched to span one; the curve is the same and edges are trimmed by their vertices, so nothing read from the file refers to the old parameters. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * model cache: a body keeps its file's declared accuracy (#2814) A body restored from the cache dropped the accuracy the file it was read from declares, so the planner held its boundaries to the kernel's own bound and a reopened design drew differently from the import. It is stored with the body's runtime values, and only when there is one. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * tess: a boundary within a hundredth of its body lies on its surface, at every quality (#2814) #1721 held a body read from a file to the accuracy the file declares. A writer declares what it aims for, not a bound its edges keep: a 251-body robot assembly declaring 0.01 µm has boundaries 10 to 30 µm off their surfaces, and 95 of its bodies lost their display plans. The bound is a hundredth of the body again, what Normal quality always allowed, and now the same at every quality, so zooming in still never drops a face (#1721's point). A file declaring more raises it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * STEP import: keep faces whose edge vertices sit slightly off their curves Some exporters write an edge's vertex beside the end of its curve, further off than the accuracy the file declares (a surface export declares 0.01 mm and puts a vertex 0.19 mm off two spline ends). The reader refused such edges and left the face, and with single-face bodies the body, out. A vertex may now sit up to the file's tolerance or 1/1000 of the model's size (the diagonal around its VERTEX_POINTs), whichever is larger, never more than the existing 1 mm ceiling. Spline and open-conic edges have the end control point moved onto the vertex, so every such edge meets its vertices exactly. The file's declared accuracy still governs closed-curve, seam and circle checks. * tess, io: review clean-ups (#2814) - A sliver face is one whose loops are all slit: drop_slits finds it in the retry after a failed plan, so the pre-check on every face (folded) is gone. - The flat fill uses cdt::triangulate (a lenient fill that leaves out sides crossing one already kept) and its flood-fill inside test, and the plane from geom::Plane. - Refinement only builds its indexes when a face was refused, takes the faces to plan again from edge_faces, and re-samples edges on the pool; Rules::finer for the finer rules. - One PackageWriter::fits for the model cache, the preview and the thumbnail. - The band split's ring tolerance lives in split.rs; comments say what the off-surface bound is now. - The CLI logger prints Level::as_str(). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM --------- Co-authored-by: David Lackovic <lackovicdavid1234@gmail.com> Co-authored-by: bherbruck <brennen.herbruck@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Ray <raykholo@users.noreply.github.com> |
||
|
|
349a6c6fc4 |
perf: a copy placed for showing doesn't turn its revolved faces again (#3044) (#3104)
Moving an occurrence places every body under it again, and each placed copy searched every revolved face for where it sits to turn it away from its seam, although its source had been turned already. On the Prusa Core One assembly that search was most of the 12.7 s a move of the top occurrence took. A body now records that its revolved faces are turned, and world placement (`place_matrix`) skips the search for such a body. Modelling moves (pattern copies, hole tools) keep `transform_matrix`, which still turns them in the copy's own frame: where a face wraps all the way round the turn it finds depends on those coordinates, and later booleans depend on it. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
14b7529465 |
Loft guide rails (#201) (#3371)
* kernel: loft guide rails (#201) A loft follows one or two guide rails between its sections: stations are added between each two sections, each the plain loft there moved so that the point a rail guides lands where the rail crosses the station's plane — turned about the loft's direction and scaled (or stretched across to the rail) with one rail, carried, turned and sized between two. The sections and caps stay exact; the smooth loft runs through sections and stations. Solid and sheet lofts. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * doc, engine: solid.loft and surface.loft take guide rails (#201) `rails` (one or two {sketch, curves}) and `rail_fit` (scale | stretch), stored on Loft and SurfaceLoft (one pending format note), parsed by the sweep's rail parser (now shared) and built through the kernel's railed loft. Rails on a loft to a point, or on a surface loft with edge sections or end continuity, are refused as not supported yet. The rails' sketches are walked as the feature's references and their components placed like a sweep's. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * ui: Rail, Second Rail and Rail Fit in the Loft and Surface Loft dialogs (#201) The rail inputs and fit row the sweep dialogs have, shared through dialogs_sweep; Edit Feature brings the rails back. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * docs(roadmap): loft guide rails (#201) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * loft rails: review clean-ups (#201) - Sweep and loft rails share one turn-and-size map (`sweep_path::rail_frame`). - A station's middle and the loft's direction come from one curve through the sections' middles (exact derivative) instead of two more plain-loft evaluations per station; at most 33 wires, so railed faces stay light. - Nearest points on a section use `param_on` (kept only where the search comes nearer); the size uses `Aabb3`; one B-spline builder; anchors keep their nudge. - The railed and plain lofts share one path in `loft_with_rails` and `loft_sheet_with_rails`. - The engine leaves the not-yet-supported refusals to the design's evaluation; both lofts start their rails from the first section's first point. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * loft rails: refuse rails on sections with holes, with a test (#201) Main's lofts now take sections with holes (#2447); rails shape only the outlines, so a railed loft of rings is refused until the rails carry the holes too. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
02c77df5f7 |
inspect.clearance: mesh each body once per check instead of once per pair (#2867)
* inspect.clearance: pairs whose bodies did not change are not measured again Each clearance check measured every close pair again, though between two checks usually only a few bodies change or move. Results are now kept per pair, keyed by both bodies' geometry and placement and the check's settings; a pair whose two bodies are unchanged is taken from that cache. With 40 overlapping parts, a check after moving one of them took 0.8 s instead of 23 s (741 of 780 pairs reused). Pairs that could not be worked out are tried again each time. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> * inspect.clearance: boxes and placed keys exactly as before the reuse The pair boxes are taken over the mesh's triangles with finite corners, as a distance shape's are, so pruning is unchanged. A placed body's identity now includes its model body's own frame, so two placements are never mistaken for one another. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> * inspect.clearance: a large body is meshed once for all its pairs Each pair that touches cuts the larger body down to the pair's region with a kernel boolean, and that boolean meshed the whole body twice: once for its checks and once inside the intersection. A sheet with 600 faces paid about 2.5 s per pair for meshes that were the same every time. A body can now keep its meshes for reuse (Body::keeping_meshes); its booleans take the meshes from there, and the intersection takes its shell meshes from there too (truck-shapeops: and_with_history_meshed). Clearance uses such copies for one check. Results are unchanged to the bit. On a 3 x 2 m sheet with bends and 300 holes, the clip took 0.23 s per pair instead of 2.6 s, and 24 rivets took 5.6 s instead of 16.5 s. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Co-authored-by: bherbruck <brennen.herbruck@gmail.com> |
||
|
|
1cd9983c8f |
Surface trim: projected curves, several kept regions, mutual trim (#767) (#1466)
* kernel: trim keeps picked regions, mutual trim, curves swept along a direction (#767) Trim moves to surface_trim.rs: TrimKeep::Side (the old behaviour) or Regions (the connected pieces the points pick, parted where the tool runs along an edge). mutual_trim cuts two one-face surfaces by each other's surface, extending one that stops short when asked. SplitTool::Curves takes a sweep direction; a closed curve's field is signed by inside/outside instead of extending its end segments. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * kernel: classify display edges of a face with a closed-edge hole without a panic A hole cut by a closed curve is a loop of one edge that starts and ends at one vertex; mapping the face rebuilt that edge through a check that panics on it (the guard caught it and dropped every smooth flag of the body). Such faces are now left out of the ruled-surface test. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * surface.trim: keep several regions, trim by projected sketch curves, mutual trim (#767) keep takes a list of points (the regions they pick); curves: {sketch, curves?, direction?} sweeps sketch curves onto the surface (along the surface's normal: not supported yet); with + keep_with trims two surfaces by each other, extend? meets a short one, stitch? sews the kept pieces. Trimmed faces carry their lineage, so they are named after the faces they are pieces of. New fields noted in a pending format file. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * Trim dialog: sketch curves as the tool, several keep points, mutual trim (#767) The tool input takes sketch curves too; keep points are places (several on one face add up); another surface with its keep points makes a mutual trim with Extend to meet and Stitch toggles. Edit Feature brings it all back. Labels in every locale catalog. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * ROADMAP: M8 trim by projected curves, several regions and mutual trim (#767) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: bherbruck <brennen.herbruck@gmail.com> |
||
|
|
7ad5130cd2 |
refactor: geom::UnitVec3 for unit axes and normals (#2603)
* geom: UnitVec3; a face's analytic axes and normals are unit by type Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * geom: UnitVec3 adds to and subtracts from a Vec3 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * kernel, doc, engine: cylinder axes and measured normals held as UnitVec3 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * kernel, engine: functions that take a unit axis or direction say so by type Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * doc: a face's normal goes to Plane::from_normal as is Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * kernel, doc: main's new cylinder helpers take the face's axis as a UnitVec3 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
83c31d77c4 |
surface.boundary: surfaces through boundary curves and curve networks (#763) (#2129)
* feat(geom): surfaces through curve networks, and spline spaces to build them Adds spline_space (clamped B-spline spaces, Hermite interpolation, exact embedding by Bézier degree elevation and knot insertion, a monotone cubic for reparameterising) and network (loft, Coons and Gordon surfaces through curves in one or two directions, with G1/G2 cross-boundary conditions against a neighbouring face). Part of #763. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * feat(kernel): boundary surfaces from sketch curves, 3D curves and edges kernel::boundary_network turns sketch chains, 3D sketch polylines and edge chains into network curves, gives G1 frames of the faces along open edges (EdgeFaces), builds the B-spline face (sides split at chain vertices so a join shares the body's edges) and joins it into a surface body by stitching. G2 is refused for now (not supported yet). Part of #763. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(kernel): second derivatives of B-spline surfaces in the vendored truck-geometry BSplineSurface::uuder and vvder multiplied the second differences by p instead of p·(p − 1), as BSplineCurve::der2 does, so every surface of degree p ≥ 3 (NURBS too, through its homogeneous surface) reported 1/(p − 1) of its second derivative: a cubic surface's curvature read as half. This is why a G2 boundary surface on a cylinder measured half the curvature it carries (#763). New tests hold both to finite differences for degrees 2 to 5. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * feat(kernel): G2 boundary surfaces against a body's face The network always carried the face's curvature across a G2 edge; the refusal came from measuring it with truck's halved surface second derivatives (fixed in the previous commit). EdgeFaces now reads the face's second fundamental form from the exact second derivatives instead of differencing the normal. A new test holds the curvature across a cylinder's edge to the cylinder's within 0.1%, also with a sheared far curve; G3 is refused (a network holds up to G2). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * test(kernel): a boundary patch with straight corners measures its own area A stadium's arcs meet its lines at 180°, so the Coons patch is singular at its corners. From such a corner the reference mesher's boundary walk ran onto the B-spline's extrapolation past its domain (a planar spline passes through every point of its plane there), and the face measured 289 mm² for its 158.5 (#763). The vendored mesher's bounded projection (nearest_projection, #2043) keeps the walk on the domain; this holds it there, by the faces, the measuring mesh and the display mesh. The display path (#1653) was never affected. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * feat(geom,kernel): three-sided boundary surfaces (one side collapsed to a point) A network curve may be a PointCurve: the apex where the two sides beside it meet. The curves through it cross it at the point itself, its row of the net collapses there, and the kernel's face leaves that side out of its loop (three edges, one vertex at the apex). One point per patch, as a side; refused elsewhere, when it moves, or with a continuity condition. Tests: a triangle and a quarter disc filled flat with their analytic areas (40 mm², 25π), by geom and by the kernel's faces and meshes. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * feat(doc): boundary surfaces through curve networks and loops of three or four FeatureKind::SurfaceNetwork saves a network as `u` and `v` curves, each a sketch chain (planar or 3D), a chain of a body's edges with an optional G1/G2 continuity, or a point (the apex of a three-sided patch), and an `operation` that can join the surface into the body of its edges. A SurfaceBoundary of three or four sketch curves, refused until now, builds as the flat Coons patch of its loop (three collapse the side opposite the first curve). The format change is one pending file; feature-walk goldens record the new variant's sketches, bodies and points. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * feat(engine): surface.boundary through loops of three or four and curve networks The command keeps its loop form (two to four curves of one sketch; three and four now build the flat patch of the loop, crown refused there) and gains a network form: `u` and `v`, each curve a sketch curve id, a {sketch?, curves} chain (planar or 3D), a {body, edges, continuity?} edge chain (g1/g2 with the face beside it) or a {point} for a three-sided patch, with `operation` new or join. Edits may move between the two forms (timeline.redefine accepts the command now that it has a dialog). Tests: analytic areas of loop patches and of a hyperbolic paraboloid bounded by four 3D lines (every mesh vertex on z = xy/10), a loft across two sketches, G1 and G2 measured across a cylinder's edge with inspect.continuity (angle < 0.1°; curvature jump 1e-16 with G2 against 0.027 with G1), 26 hostile networks refused without panicking, and u/v added to hostile_params_never_panic. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * feat(ui): Boundary Surface dialog Curves and Cross curves take sketch curves and edges (picks that meet end to end in one sketch or body are one chain); Continuity and Operation (New Body or Join). Two to four sketch curves of one sketch with nothing across are the loop patch; anything else is a network. Edit Feature brings either back (per-side orders, crown and stations the dialog does not show are kept). Strings in en, ja and zh. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * docs: ROADMAP M8 and the bridge patch's notes for boundary networks (#763) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * test(oracle): a boundary surface through a loop, thickened (#763) Case 83: four sketch curves (a square's three sides and a half circle for its top) make one boundary surface, thickened 2 mm; analytic values from tools/oracle-analytic/cases_surfaces.py (V = 2A, area 2A + 2P, centroid by moments). Recipes gain boundary_surface, thicken and remove. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM * refactor: boundary surfaces, review cleanups Project onto the face once per derivative evaluation (the frame is passed to natural() and reused by scale()), keep each track's finite-difference step instead of rescanning its table, export the kernel's edge-pick and chain caps and the default station count for the engine, doc and dialog to share, map TooLarge spline errors to KernelError::TooLarge, reuse the engine's operation parser, and skip the dialog's sketch lookup when the picks are no loop. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: bherbruck <brennen.herbruck@gmail.com> |
||
|
|
5fa8e7d60a |
Sweep: orientation, twist and end scale (#1269)
Part of #771 and #772. solid.sweep and surface.sweep take orientation (perpendicular, parallel or a direction), twist (up to 4 turns) and end scale (0.01 to 100), applied about the profile's normal through the path's start; default options run the old sweep, so existing sweeps are unchanged. New fields are optional, left out when unset and noted under format 21; twist and scale are model parameters. Both sweep dialogs get Orientation, Twist and End Scale rows; labels in every catalog. Checked on main + this branch: cargo check --workspace, kernel/engine/UI sweep tests, the doc suite and the robustness goldens. |
||
|
|
2a4907884b |
Ruled Surface: strips off an edge chain, exact where possible (#762) (#1151)
Ruled Surface: strips off an edge chain in normal, tangent, angle or direction mode, exact planes/cylinders/cones where possible, mitred or round corners, stitched into one surface body. SurfaceRuled is noted under format 21. Closes #762. |
||
|
|
9b0f028f13 |
STEP assemblies: mesh a repeated part once and place it for its instances (#1152)
The reader converts each item once, but every instance made its own display mesh (tessellation, seam and tangent flags), the most expensive step of opening a large assembly. A later instance of an item now shows its first instance's mesh, placed by the difference of the two placements. Only rigid placements share; split lines and any operation drop the link. Measurements and export read each instance's own geometry, so eval output is unchanged. Generated assemblies: mesh phase 2,215 -> 139 ms (901 bodies) and 1,028 -> 85 ms (5,401 bodies), with the same triangle counts. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
c1c813e572 |
Thicken any surface, across sharp edges (#765) (#932)
Thicken now moves faces through the same mover as Offset Surface. Spheres, cones, tori and B-spline faces thicken as well as planes and cylinders, and a thickness that would fold a curved face over is refused. Where thickened faces meet at a sharp edge, a wall closes the gap and corners are closed with flat patches. Thickening into an inside corner is still refused with a clear message. Closes #765. Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> |
||
|
|
2b70ed7b72 |
Offset Surface: faces copied out at a distance, exact or fitted (#758) (#872)
Offsets picked faces along their normals into a new surface body: planes and cylinders move exactly, other faces get a fitted B-spline within tolerance, and offsets that would fold over are refused. Adds the SurfaceOffset feature (noted under format 18), the surface.offset engine command and an Offset Surface dialog. Closes #758. Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> |
||
|
|
d2e409f40c |
Surface walls named after their sketch curves (#757) (#850)
Each wall of a surface built from sketch curves (Surface Extrude, Revolve, Sweep and Loft) is now named after the curve it comes from, exactly rather than from geometry, so references to those faces survive edits. |
||
|
|
897b7d93b5 |
Surface Loft: sheets through open or closed sections (#847)
Surface Loft lofts open or closed curve chains, one section per sketch in pick order, into surface bodies. Adds the SurfaceLoft feature (format 18 note), the surface.loft command, a dialog with Edit Feature support, and kernel and engine tests. Part of #757. |
||
|
|
aba57f1ca2 |
Surface Sweep: sheets carried from open curves and profiles along a path (#843)
Surface Sweep carries open curves and closed profile boundaries along a sketch path into surface bodies, with smooth walls along curved point paths. Adds the SurfaceSweep feature (format 18 note), the surface.sweep command, a dialog with Edit Feature support, and kernel and engine tests. Part of #757. |
||
|
|
2eb292dd4a |
Surface Revolve: sheets turned from open curves and profiles (#824)
Surface Revolve turns open curves and closed profile boundaries about a sketch axis into surface bodies, with cone apexes and sphere poles where a chain ends on the axis, and a closed shell made solid. Adds the SurfaceRevolve feature (format 18 note), the surface.revolve command, a dialog with Edit Feature support and analytic kernel and engine tests. Part of #757. |
||
|
|
b52d4390a0 |
face.delete heal: false leaves an open surface body (#861)
Delete Face takes heal (default true, as before). With heal: false the picked faces are removed and the gap stays open, leaving the remaining faces as a surface body (kernel remove_faces); deleting every face is refused. Saved only when false, noted under format 18. |
||
|
|
753b0a2eab |
Unstitch and Reverse Normal (#856)
Unstitch takes a body's faces out as surface bodies; Reverse Normal turns a surface body's faces over. Both are saved in format 18. Closes #766. |
||
|
|
e540832626 |
Surface Extrude: sheets from open curves and profile walls (#815)
surface.extrude sweeps open curve chains and profile boundaries along the sketch normal into a surface body (walls only, no caps). Saved under format 17. Refs #757 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
2bb24d1d2a |
perf: prism pairs before the mesh, bodies measured once, and a STEP import that copies less (#714)
A cut or an intersection between prisms (a plate and the tools through it) is now decided in 2D before either operand is meshed. A body's size and volume are measured once, a placement reads its orientation from its matrix, the evaluation cache is bounded to 64 MiB, and STEP import copies fewer shells. Hole plates evaluate 20-30% faster with less memory, and models are unchanged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
201e9d5f9f |
Patch fills non-planar edge loops with one smooth face (#250) (#472)
* Add a one-surface fill of closed 3D loops to geom
A closed loop of curves that does not lie in a plane has no exact surface;
the usual answer is one smooth face fitted over it. fill_loop does that:
- the loop's best-fit plane (Newell normal), with a frame chosen from the
loop itself so the result does not depend on where the loop starts, its
direction, or where the part sits
- the loop seen along that normal must be simple and must not fold or run
along the normal; otherwise it is refused ("not supported yet"), never
filled with wrong geometry
- one non-rational bicubic B-spline height field over the loop's box,
fitted by least squares to the loop's samples (The NURBS Book 9.4.1,
9.4.3, eq. 9.62/9.65) with a thin-plate smoothness term
lambda*A*int(h_uu^2 + 2 h_uv^2 + h_vv^2), A one grid cell's area, so the
fit is the same at any scale; only planes are reproduced exactly
- span counts per direction (long narrow loops fit), refined until the
loop is within tolerance, else refused with the deviation reached
bspline: bisected span search, basis functions on a stack array, one
clamping helper shared by curves and surfaces, one binomial helper.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8
* Patch fills non-planar loops of edges with one smooth face (#250)
surface.patch with edges refused any loop that is not planar ("not
supported yet: patching a loop that is not planar"). It now fills it:
- planar loops still get one exact planar face, but planarity is certified
conservatively: lines by their ends, B-spline/NURBS edges by their control
points, intersection curves by their samples lying on a support plane
within tolerance; a loop that can't be certified is filled instead
- other loops get one face from geom's fill_loop, bounded by the body's own
chained edges, whole (no split): its history is one generated face whose
edges are the body's, and it stitches back into a closed solid
- intersection-curve edges are sampled by a seeded, guarded double
projection shared by the planarity test and the fill (plane_fit)
- the face tolerance is 10x the planarity tolerance (documented: later
operations take the face to contain its edges within it)
- edge picking runs inside the guard; the geom->truck conversion is shared
with the T-spline sheets (spline_conv); the Newell plane fit is shared with
STEP import
Tests: 3- to 8-sided, concave (dart, arrow, plus), flat-corner, two-edge and
imported rims fill as one face and stitch closed (volumes against an
independent integral); finite mesh normals, same result for any pick order
or placement; non-height-field loops and too-fine detail are refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8
* Test the Patch dialog filling a non-planar loop of picked edges
The Patch dialog's only test used a sketch profile. Picking the four
curved rim edges of a box cut by a sideways cylinder now makes one
surface.patch command whose result is a single smooth face over the rim.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
|
296683229d |
Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)
* WIP deep rename (not for push) * WIP2 * WIP3 * WIP4 wxs fix * rustfmt * Rename the remaining identifiers in merged crash-report code Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
a04ef4ca59 |
T-spline core library and sheet bodies (#250, step 1) (#337)
* Add B-spline basis, knot insertion and NURBS surfaces to geom Freeform faces need local refinement and gap-free joins between patches with different knot vectors, which tensor B-spline grids cannot give; T-splines can, and the first user is an N-sided Boundary Fill of non-planar loops. This lays the univariate groundwork they rest on, in the L0 geometry crate so it stays independent of the B-rep kernel: - Cox-de Boor basis of one function from its local knot vector, on half-open spans with a left-limit side for the domain end, with derivatives (NURBS Book eq. 2.5, 2.9) - knot insertion into a single basis function (Sederberg et al. 2004 section 3) and Bezier extraction of one function by repeated insertion - Boehm knot insertion for curves (NURBS Book A5.1), de Casteljau evaluation and sub-segments - a rational tensor NURBS surface with evaluation, knot insertion and clamping, and a rational Bezier patch type All input is checked (finite, monotone knots, positive weights, size caps) and returns SplineError; nothing indexes unchecked. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8 * Add T-spline surfaces: T-mesh, evaluation, AS check, refinement, extraction Tensor B-spline faces refine only by whole rows and columns and cannot join patches with different knot vectors without gaps. T-splines allow T-junctions in the control net, which fixes both; the first user is an N-sided Boundary Fill. This adds the maths only (no command, no change in behaviour): - T-mesh in index space with knot values per line, validated (outer rectangle, rectangular faces, no empty lines, size caps); local knot vectors read off rays from each vertex, rays leaving the mesh repeat the boundary (Sederberg et al. 2003 section 3) - rational T-spline evaluation and first derivatives for odd bi-degree, with a complete (p-1)/2-line frame and the domain inside it - T-junction extensions and the analysis-suitability check (Scott et al. 2012 section 2) - local refinement that keeps the surface exactly: requested knot lines are cut in, then every original blending function is carried as a record and split (violation 1) or the mesh gains edges (violations 2 and 3) until each record is a blending function of the refined mesh (Sederberg et al. 2004 section 3); analysis-suitable input stays analysis-suitable by carrying conflicting T-junctions across faces - NURBS <-> T-spline conversion for meshes without T-junctions, and Bezier extraction over the rectangles no blending-function knot line crosses Measured: regular T-spline vs NURBS < 1e-12, round trip exact, partition of unity with T-junctions < 1e-14, refinement deviation <= 1.4e-14 over 40 random refinements, Bezier patches vs surface < 1e-14. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8 * Convert T-splines to sewn NURBS sheet bodies in the kernel A T-spline is only useful to the modeller once it is a B-rep face set. tspline_sheet builds an open shell: a mesh without T-junctions becomes one clamped NURBS face; otherwise each Bezier element is a face, and sides are split at the T-points where neighbours' corners land, so all faces share vertices and edges and the sheet is one oriented shell (V - E + F = 1). Every truck call runs under guard. No command yet; Boundary Fill will be the first caller. Tests: one face for a regular surface, sewn Bezier faces with T-junctions, tessellated points on the surface to ~1e-9 mm, and hostile control nets (coincident, 1e300, needle-thin) never panic. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8 --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
08d797235d |
feat(kernel): history across coalesced stepped walls (#136)
A cut of stepped prisms sews a wall over one segment through successive
slabs as one face, and the generated planar walls are then joined on
their common supports. Until now such a piece carried no history.
- prism_lineage: a sewn wall records what it is over in each slab it
spans (Spec::Wall { levels, slabs }), so a coalesced wall comes from
the operand walls under it in every slab
- the sewn piece's history is attached before the joining and carried
through it (Built::Traced); planar_regularize composes the history of
the body it joins with the join itself
- a composed face is Split only where record::mark_shared_split finds an
origin under several faces; an inner Split alone no longer makes one
- Body::same ignores history: an operation that leaves a body as it is
gives the same body, carrying that operation's history
The two boolean history tests that waited for this run again, and the
coalesced and regularized step cuts are covered.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8
|
||
|
|
08d7037176 |
feat(kernel): modifiers report exact face and edge history
Fillets (local, loop, rolling ball, corner, variable, chord), chamfers (cutters, local corners, loops, two sides), shell, draft, offset faces, split face/body, delete face, patch/copy/stitch/trim/extend and transforms record their history over [body] while they build: faces rebuilt from the body's, blends in place of edges (corner patches in place of the edges at the corner), shell walls as offsets, edges as pieces of the body's or where two faces meet. Multi-step operations compose each step. The push-face offset fallback now has history, and the bore union composes its narrowed tool. A reflection reorders a body's edges, so transforms now match edges by identity (mirrored copies reported the wrong edges). Refs #136 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8 |
||
|
|
d69ebbee1b |
refactor(kernel): number profile loops once and record face history as faces are built
One numbered loop type (crate::numbered) carries each segment's profile numbers through orientation, snapping, circle re-seaming, re-sampling and rotation; every builder orients its regions through it once. Builders that make their own side faces pair each face with its provenance as it is made (ruled walls by the wire edges each face holds, smooth lofts, coils and path sweeps by segment), and cap_and_close appends the caps itself. Column following is kept only for faces truck sweeps internally (rsweep, tsweep along paths, cones, where an apex vertex stays put). Extrude derives face sources and history in one topology pass. One attach entry point takes operands with their edges already indexed. Geometry, face order, face sources and recorded origins are unchanged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8 |
||
|
|
8c81bc60d0 |
feat(kernel): creation builders report exact face history
Extrude, revolve (partial and full turn), tapered extrude, loft (incl. to a point), sweep, path sweep, coil, primitives, lip, emboss and thicken attach the exact history of the bodies they build: each face's profile segment, cap or operand face, and each edge's operand edge, recorded by topology identity inside the building call. Nothing is sampled; a body whose faces do not follow the expected construction carries no history. Face sources are unchanged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8 |
||
|
|
c87efa1f35 |
feat(kernel): exact face and edge history model
Bodies can now carry the exact history of the operation that made them: for each result face its origins among the operation's operands (kept, modified, split, merged, or generated from a profile segment, cap, edge or offset) and for each edge the faces it separates and the operand edge or face pair it came from. History is recorded by the operation, never sampled, and checked against the body when attached. - history.rs: the vocabulary (moved from provenance.rs), History::check, identity, substitute (composes an operation with the one that made an operand, including bodies made from a sketch) and face-source propagation. - One edge order for a body (body::edge_order), shared by tessellation and history, so history edge indices are the mesh's edge indices. - Transforms report an identity history; placed_topology documents the face/edge order guarantee it relies on. - provenance.rs keeps the geometric trace for operations that do not yet report history. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8 |
||
|
|
c53aff7592 | Fix artificial Shell wall splits on stepped bodies | ||
|
|
c1d819f235 |
feat: preserve body history and placed modelling workflows
Record ownership transfers in the timeline so earlier Join/Cut membership, world placement, machining data and styles survive component moves, edits, independent copying, undo and reopening. Preserve pending positions in history snapshots and keep constructor transfers ordered during feature redefinition. Retain shallow sheet pockets and exact planar intersection islands through unfold/refold, with depth-aware flat previews and DXF export. Store explicit 3D wire coordinate spaces and migrate known legacy provenance without moving saved points or analytic fits. Infer unique eligible cylindrical Emboss targets, align Revolve manipulators with actual extent geometry, and discard obsolete preview errors after input correction. Certify constructed and immutable imported face styles using exact source metadata while preserving legacy face names. Upgrade designs to format10 with bounded validation and geometry-preserving legacy migration. |
||
|
|
4b7e1d317d | fix: load designs off-thread and cache recent thumbnails as PNGs | ||
|
|
4c8f080691 |
Faces split on purpose stay split: the body remembers its Split Face lines, export and healing keep the pieces apart
Split Face records the new edges as polylines on the body (Body::split_lines); the document carries them through later features. STEP export no longer joins pieces of one surface across such a line, and healing (fillets, chamfers, booleans, shell, draft) no longer merges coplanar pieces there, while incidental pieces (boolean leftovers, seam halves) still merge as before. Tests: plane and cylinder splits keep their face count through a STEP round trip (and join without the record), a second split keeps both lines, and an engine test exports a split box after a fillet with 8 faces. Fixes #11 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT |
||
|
|
c0e3e3d216 |
Variable-radius and chord-length fillets
New kernel file blend_variable.rs. The hooks into blend.rs are visibility
only: plane_normal, vtx, rebuild_face and unsupported are now pub(crate).
- fillet_variable(body, edge, start, r0, r1) works on the same edge
configuration as the constant fillet (straight edge, planar faces, end
faces square to it). The radius runs linearly from the end nearest
`start`, and every section square to the edge is a circular arc. The
blend is an exact degree (2, 1) rational B-spline: arc control points
move linearly.
- fillet_chord(body, edges, chord): the radius per edge comes from its
face angle (chord = 2 r cos(phi/2)).
Fillet feature: style constant | chord | variable {radius2, start};
FusionFilletEdgesCommand takes type, radius2 and start.
Tests:
- Variable 2 -> 5 on a box edge removes (1 - pi/4) L (r0^2 + r0 r1 + r1^2)/3.
Starting from the other end gives the same solid; equal radii give the
constant fillet; too large is refused.
- Chord 4 on a right angle equals radius 4/sqrt(2).
- Engine: both types by command.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
||
|
|
7027382667 |
split_faces: exact sketch segments, a face map, and misses named
For solvecraft-params' Split Face feature: - Sketch tools are chains of Seg2. A single line splits by its plane and a single arc by its cylinder, exactly (a circular edge on a planar face); longer chains and splines follow the curve. - split_faces_with_map gives the source face of each face of the result. - A listed face the tool misses is an error naming it (split_any keeps the lenient form for Trim). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL |
||
|
|
b8d00aea13 |
Surface Extend: a planar surface's straight edges pushed out (FusionExtendCommand)
Kernel extend(body, edges, distance) moves the picked straight edges of a planar surface outward in its plane, with neighbours meeting them. Doc feature SurfaceExtend, engine FusionExtendCommand. Tests: 10x10 extended by 5 past one edge gives 150, past two gives 225; the engine patch, trim, extend and thicken gives 240. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL |
||
|
|
dd6c8e1a6b |
Surface bodies: Patch, Stitch, Trim and Thicken
Kernel (surfaces): - Bodies with an open shell are surface bodies (Body::is_surface). - patch_region: a planar patch of a sketch region. patch_edges: a planar patch filling a closed loop of a body's edges. - copy_faces: faces copied out as a surface. - stitch: sew surfaces along coinciding edges, turning faces to agree; the result is a solid when it closes. - trim: cut a surface by a plane or face and keep one side. - thicken: offset planar and circular-cylindrical faces along their normals (one side or symmetric) into a solid. Plane copies slide; cylinder copies scale about the axis, exact for NURBS circles. Free edges get ruled walls. Faces meeting at a sharp edge are refused. Doc features Patch, Stitch, Thicken (with operations) and SurfaceTrim; engine commands FusionSurfacePatchCommand, FusionSurfaceStitchCommand, FusionSurfaceThickenCommand and FusionSurfaceTrimCommand. Tests (volumes): - A 10x10 patch thickened by 2 gives 200, also symmetric. - Half a cylinder side thickened outward gives half a ring; both halves inward give the full ring. - Six faces of a box stitched back give 6000; an open box with its top patched from the edges, stitched, gives 6000. - Trim keeps 30 or 70 of 100. - Engine: patch, trim, thicken gives 140. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL |