* claim: #3654
* Control channel: control.running lists what the app is running, across connections (#3654)
control.pending answers only for the connection that asks, so a second client,
the MCP bridge after a reconnect or a script saw {"pending": null} while the app
was busy. control.running answers for the whole app, the same on every
connection and at once (the connection's own thread answers it, also while it
is busy with a timed-out request): every request the app has been sent and not
answered yet, oldest first, with its connection, id, method, command id (or a
batch's step count), seconds since it arrived and whether it still waits its
turn. A timed-out request stays listed until the app answers it, also after its
connection closed. Parameters are never shown.
The window marks a request started when it takes it (ControlRequest.started),
which tells queued from running. The MCP server gets a read-only `running` tool.
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
* claim: #3483
* Settings > AI: Add agent opens from the Home tab too (#3483, #3513)
The Add agent dialog was drawn by the chat panel, which Home doesn't
show, so Add agent did nothing while Home was open. It is now drawn
from the frame itself, before Home and the workspace part ways.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a quick double Esc finishes the sketch
One Esc still puts the tool down, then clears the selection, and with
nothing left to cancel keeps the sketch open (#1804). A second press within
0.4 s finishes the sketch, keeping it, the same as Finish Sketch, also when
the first press cancelled a tool.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a double Esc takes away a blank sketch; only Esc twice in a row counts
A quick double Esc on a sketch the user added nothing to removes it in one
undo step, the view and tab going back as on Finish, so no empty sketch is
left behind. A sketch with anything in it is still finished and kept.
The double press counts only for two Esc presses in a row with no tool or
dialog left after the first: any other key in between resets it, and while
a tool is still out (its first Esc only ended a chain) the press puts it
down as before. Tests that press Esc on its own now wait past the window.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Fix recovery for unsaved background tabs (#2884)
* Recovery: scheduled autosaves of every tab write on the worker thread (#2884)
After #3139, Autosaver::save waits for the write and Autosaver::tick runs
it on a worker. The scheduled path now goes through tick (which skips a
tab whose previous write is still running), so several dirty tabs no
longer write on the window thread each interval (#3044). save stays for
Save, close and shutdown. Each tab's autosaver has no clock of its own:
the shared cadence decides when it is due. The tests wait for the
writes a tick started.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Recovery: closing a tab waits for its running autosave before removing the entry (#2884)
With the autosave on a worker thread, discard could remove the files and
the lock while a write was still running; the write then recreated the
entry without a lock, and the next launch offered a design closed with
Don't Save. discard now ends the running write first, as Drop does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* ui: spacing, radius and type tokens, per-tab accents, agent and on-accent tokens
* ui: per-tab accent behaviour and a larger application bar with a Start page button
* icons: silhouette master and flat assistant and agent link icons (open for review)
* icons: apply review notes (sparkle assistant, refined plug, silhouette halo)
* icons: wire the silhouette master to inspect.silhouette; record the accepted icons
* ui: application bar to the design: separators, Save, house, assistant icon, readable hovers
* ui: ribbon structure: Model to View tabs, contextual Sketch and Sheet Metal, migrated pins
* ui: ribbon painting to the compact design
* ui: smaller icon button highlight and assistant mark on the bubble corner
* ui: short ribbon labels that wrap at spaces
* ui: ribbon buttons fit their labels and Finish Sketch shows its full name
* ui: constraint gallery, workspace menu, section list headings and richer tooltips
* ui: lighter selected tab label, ribbon surface and dimmer bar separators match the dark design
* ui: document tabs as rounded chips with a dimmer inactive label
* ui: document tabs fit their names and show close only when active or hovered
* icons: close and plus masters for the document tabs (open for review)
* ui: centre the new-tab plus and overflow button on the bar
* ui: a quiet rule under the ribbon tabs on non-contextual tabs
* ui: the application bar mark separates its faces with the bar colour, not white
* ui: open ribbon section label uses the selected tint and a chevron
* ui: dim the tab close and plus icons until hovered
* ui: every ribbon dropdown uses the chevron, the workspace card included
* ui: the active document tab uses the design's surface colour
* ui: the bug button's right padding mirrors its icon side
* ui: square constraint cells and a rule before the grid
* ui: constraint cells back to their earlier size, keeping the rule
* ui: smaller constraint cells and icons, centred in the section
* ui: constraint cells fit the height of the large buttons' icon and label
* ui: sketch Create titles share the other labels' line
* ui: format the application bar and ribbon changes
* ui: active tab surface token and the colour and hover tests that follow the redesign
* tests: the merged parameter and narrow toolbar tests follow the compact ribbon
* i18n: the Malay Gap label has an English source and its Japanese and Chinese translations
* apply_off_thread tests: the evaluation lingers in tests, so still computing never depends on machine speed
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* perf: renaming a feature evaluates nothing (#3044)
A feature's name labels it and builds nothing, but a timeline rename evaluated
the whole design again (about 70 s on the Prusa Core One assembly, and again
for undo). When the only change is one feature's name, the model renames its
result, sketch and construction geometry in place and takes the renamed
design's fingerprints. A rename other features follow (a plane a sketch is on)
or of a failed feature still evaluates the design.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Guard cheap commands on designs with thousands of bodies, plus a scaling bench (#3044) (#3121)
Cheap commands stay cheap on designs with thousands of bodies, with a scaling bench.
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Save As and Open use the browser's file dialogs where the File System Access API exists; Save writes back to the same file, its handle kept in IndexedDB across reloads. File > Download design added. Other browsers keep storing designs in OPFS.
* claim: #2716
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Editing a sketch past the history marker rolls the marker to it (#2716)
Edit Sketch rolled the timeline back to just after the sketch only when
the marker was later. With the marker before the sketch it stayed there:
the sketch wasn't built, so it opened with no palette and couldn't be
edited. The marker now moves to just after the sketch either way, and
Finish Sketch puts it back as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The test could lose a race: with a zero wait the evaluation sometimes finished and applied
before the check that the dialog was still computing. The evaluation is now held at a test
gate until the dialog has been seen saying so.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Mouse gestures: a ring of tools on the right button, per studio and customizable
Preferences > Navigation gets a Mouse gestures switch and a Customize window (number of
tools and their place, per studio). Gestures need the SolidWorks mouse mode and turn the
right-drag orbit off. The ring is 280/350 pt, one zone per tool, alternating tints (three
when the count is odd). The radial context menu is unchanged.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Dwcq9eNUMZ1jNeKvWd1bcZ
* Mouse gestures: the ring opens on the right-button press; the right-click menus are off while gestures are on
The ring opens at once on the press, even while a tool or dialog is active. While gestures are
active the viewport's right-click context menu, the right-click that finishes a tool and the
radial context menu no longer fire. With gestures off nothing changes.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Dwcq9eNUMZ1jNeKvWd1bcZ
* Mouse gestures: the ring opens after 4 px with the right button held; a plain right-click keeps its menu
The ring no longer opens on the press. It opens where the button went down once
the pointer has moved 4 points with the button held, even while a tool is in
progress. A right-click that does not move opens the usual context menu (or
finishes the tool) again; the release that ends a gesture opens no menu. The
radial menu stays off while gestures are active.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Dwcq9eNUMZ1jNeKvWd1bcZ
* Re-trigger CI (the run was cancelled when approved-for-ci was added)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Dwcq9eNUMZ1jNeKvWd1bcZ
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Open: show the design as its bodies are meshed, off the UI thread (#3053)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Open: hold screenshots until the design is meshed; profile lines
* Tests: time-bounded opens
* Open: a Loading parts n/N note while bodies are meshed
* Open: frame the design from outlines while it goes into the window
* Outline bounds: vertices and edges only; test
* Frame watch: the window thread's frame times by open phase (SOLIDCRAFT_PROFILE_FRAMES)
* Open: the picture grows in mesh order and stays once complete; refreshes pace themselves; named frame steps; watchdog test
* Open: outlines measured on the file worker and kept per body
* Open: draw the Home picture under the opened file's own key once meshed
* Format the open wait
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3198
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Look At frames the sketch's geometry, not its plane's origin (#3198)
Look At on a sketch (its menu, Ctrl+8, the navigation bar, entering a
sketch) centred the view on the sketch plane's origin and kept the zoom,
so a sketch drawn away from it - an imported part placed far from the
origin - ended up out of view. Both paths now share onto_sketch: centred on
the sketch's bounds, zoomed out when they would not fit (never in); an
empty sketch keeps the plane's origin.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Register the Look At tests
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Look At tests: Vec3::len
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #2678
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* WIP: timeline.dependents shares the evaluation cache (#2678)
The check before a delete evaluated the edited design on a fresh model:
it recomputed the whole timeline and left nothing for the delete. It now
evaluates on a copy of the session's model. Adds Ahead::replies for
running such checks off the window thread (the UI part is still to come).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Delete: check what a delete breaks off the window thread (#2678)
Both checks a delete makes first (timeline.dependents for the timeline's
Delete, the selection.delete dry run for Delete on the selection) evaluate
the history after the deleted feature, on the window thread. A part with a
slow feature froze the window for as long as everything after it took
(5.9 s in the report). They now compute off the window thread like undo and
the history marker: within the app's 150 ms wait they carry on at once,
otherwise the window says it computes and the delete (or the confirmation)
follows when the report is in. A design changed meanwhile is checked again;
a second Delete meanwhile is left out.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* ci: run the checks again (the run for 3b94e8e0 was cancelled when the PR left draft)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* kernel: a blend runs along chains of several faces and lines closed rims up (#764)
A blend's chain may run along the boundaries of several faces (a tube's rim
along the halves of its wall): each edge continues from its own best-facing
face, read station by station. Before, a chain had to be the edges of one face,
so every rim of a revolved or cylindrical surface was refused.
Two closed chains blend from matching seams: the second chain's start (searched
by arclength, then narrowed) and direction are the ones that put each station
closest to its partner, so rims whose seams sit apart no longer twist. A
picked `seam` point on each chain fixes the start instead. A closed chain
against an open one is refused. Closed chains leave towards each other's
centroid, not a point on the rim.
Stations are read on the edges' own curves, not on the chords of the length
table (they sat up to the chord's sagitta inside a curved edge), and the
reported gap is measured to the curves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* kernel: closed blend chains run round the same way; Hermite strip and seam tests (#764)
The second of two closed chains runs round the same way as the first (by
their area vectors), so a picked seam turns the blend by just the angle
between the seams instead of folding it over. The nearer pairing decides only
when the loops stand almost at right angles.
Tests for the issue's gates: the blend between two offset box rims is the
analytic cubic Hermite strip (control points from the chord) and keeps the
top faces' normal along both seams; picked seams a quarter apart turn the
blend a quarter round.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* surface.blend: `seam` picks where each chain's stations start (#764)
A point on each chain, saved with the feature (one pending format change),
moved with the design like `align`, and refused when it is not two points.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* surface.blend: a test between two tube rims, their seams picked and saved (#764)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* Blend dialog: edges at each end, continuity and bulge per end, stitch (#764)
SURFACE › CREATE › Blend Surface opens a dialog: the edges the blend leaves
and the ones it arrives at, each end's continuity (G0–G3) and bulge, and
Stitch to both bodies. Edit Feature brings it back and keeps what the dialog
does not show (align and seam points). Labels in every locale catalog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* ROADMAP: M8 Blend runs along several faces, pairs closed rims and has a dialog (#764)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* kernel: a blend station on the vertex between two support faces is read on the neighbour (#764)
A station where a tube wall's two halves meet sits at a corner of one half's
parameters; with a leave direction that turns round the wall (tubes off each
other's axis) the shape could not be read there and the blend was refused. The
neighbouring chain edge's face holds the same point and reads it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* blend: review clean-ups (#764)
- ChainLine keeps one list of samples instead of four parallel lists.
- frames_on and boundary_gap take the chain's ChainLine instead of rebuilding it.
- A station is read on the neighbouring face only when it sits on the vertex the two edges
share, each face once, and each face keeps its own walk.
- The seam rule (a closed chain starts at it, an open one runs from the nearer end) lives in
ChainLine::start_at_seam; pair_with reuses the start of its both-ways search.
- support_faces projects with curveblend::project; loop_area sits with plane_through.
- surface.blend parses `align` and `seam` through one point_pair; the Blend and Ruled dialogs
share body_and_edges.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Preferences: a Plugins page lists installed plugin folders
Each folder under the per-user plugins directory that has a plugin.json
appears in Preferences. Turning one off is saved with the other settings.
The page reads the manifest and does not run any code from the folder.
* Retrigger checks after the cancelled run
The required ci check failed because the workflow was cancelled before
any job started. This commit does not change the plugins page.
* kernel: loft guide rails (#201)
A loft follows one or two guide rails between its sections: stations are added between each two
sections, each the plain loft there moved so that the point a rail guides lands where the rail
crosses the station's plane — turned about the loft's direction and scaled (or stretched across
to the rail) with one rail, carried, turned and sized between two. The sections and caps stay
exact; the smooth loft runs through sections and stations. Solid and sheet lofts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* doc, engine: solid.loft and surface.loft take guide rails (#201)
`rails` (one or two {sketch, curves}) and `rail_fit` (scale | stretch), stored on Loft and
SurfaceLoft (one pending format note), parsed by the sweep's rail parser (now shared) and built
through the kernel's railed loft. Rails on a loft to a point, or on a surface loft with edge
sections or end continuity, are refused as not supported yet. The rails' sketches are walked as
the feature's references and their components placed like a sweep's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* ui: Rail, Second Rail and Rail Fit in the Loft and Surface Loft dialogs (#201)
The rail inputs and fit row the sweep dialogs have, shared through dialogs_sweep; Edit Feature
brings the rails back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* docs(roadmap): loft guide rails (#201)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* loft rails: review clean-ups (#201)
- Sweep and loft rails share one turn-and-size map (`sweep_path::rail_frame`).
- A station's middle and the loft's direction come from one curve through the sections'
middles (exact derivative) instead of two more plain-loft evaluations per station; at most
33 wires, so railed faces stay light.
- Nearest points on a section use `param_on` (kept only where the search comes nearer); the
size uses `Aabb3`; one B-spline builder; anchors keep their nudge.
- The railed and plain lofts share one path in `loft_with_rails` and `loft_sheet_with_rails`.
- The engine leaves the not-yet-supported refusals to the design's evaluation; both lofts start
their rails from the first section's first point.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* loft rails: refuse rails on sections with holes, with a test (#201)
Main's lofts now take sections with holes (#2447); rails shape only the
outlines, so a railed loft of rings is refused until the rails carry the
holes too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #2448
* Sketch: a click that moves on the way places its point (#2448)
egui reports a press that moves past its click distance, or is held past its
click time, as a drag, not a click. The viewport only placed points on clicks,
so a hand that moved while clicking placed nothing with the Slot, Line, arc,
three-point, Ellipse, Spline and the other tools, and on the first point of a
Rectangle, Circle or Polygon the few pixels became the press-drag-release
gesture of #1630 and drew a sliver.
- Any tool's press that turns into a drag (no navigation, no Select Other
hold) clicks where the button is let go.
- A Rectangle, Circle or Polygon drag let go within 24 screen points of its
press is such a click too: the first point goes where it was let go and the
shape goes on by clicks. A longer drag still draws the shape (#1630).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Save ran on the window's thread: about 130 ms on the Prusa Core One design,
and more than a second once saves keep the evaluated model. The toolbar's
Save and Save As now run the command on a scratch copy of the session on a
worker; the design waits for it as it waits for a file picker (commands are
refused meanwhile), and the outcome is taken up as running the command here
would have left it: the name and links the save gave the design, its file,
its saved state (`Session::adopt_save`), the echo, the error status, the
recent files and the home thumbnail. A tab closing or the app quitting after
Save waits for the write, as does the app's exit. Scripts, the control
channel and the browser build still save in place.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #2430
* feat: copy saved designs between documents as linked components
* fix: keep occurrence movement controls with their document tab
* test: cover linked design clipboard across tabs
* fix: place linked design pastes at the viewport pointer
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Bill of materials: part properties on components and assembly.bom
A component definition now carries part properties (part number,
description, revision, other tools' keys) and free text properties,
saved with the component and shared by its occurrences.
component.metadata and component.metadata.set read and change them in
one undo step; Paste New copies them; parts.insert numbers standard
parts from their standard and size, and parts.resize renumbers them.
assembly.bom counts the placed components (flat: parts at any depth
through their subassemblies; top: direct children), grouped by part
number or by definition, sorted by part number, and writes CSV (fixed,
quoted columns) or JSON. The app gets a Bill of Materials window on the
INSPECT panel that lists, edits and exports the rows.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Bill of materials: name a merged row's equal definitions once
Two standard parts with the same size are separate definitions with the
same name; their row now reads "SHCS M6x20" instead of repeating it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Window widths test: close the Bill of Materials window between commands
The test closes the floating windows a command opens before starting
the next one; the Bill of Materials window was left open and measured
against the next dialogs' limits.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Bill of materials: sub-parts in their part's row, and part properties without re-evaluating
assembly.bom takes group_children: true. A part with a part number keeps
what is placed inside it (a bolt's washer and nut) in its own row, listed
under it as children (items 1.1, 1.2, with each and count) instead of rows
of their own; bolts with different contents stay different rows, and
total_occurrences is the same either way. The window has a switch for it
and shows the children under their part; the CSV lists them after their row.
Changing part properties re-evaluated the model, re-seated every joint and
rebuilt the placed model: 361 ms per change with 30 jointed bolts. A change
that only touches components' metadata and properties now takes the same
path as a render-only change (proved on the whole Document), also for its
undo and redo: 0.6 ms.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Bill of materials: look the structure up once, not per subassembly
Deciding whether a subassembly is a part (it has bodies of its own) scanned
every body of the model for each subassembly, and each body looked up its
feature by a linear search of the timeline: subassemblies × bodies × features.
assembly.bom now indexes the placements, the body owners
(Document::body_owners: one pass over the bodies with the timeline in a map,
the same rule as model_body_component) and the numbered components once per
call. 600 bodies and features with 60 subassemblies: 8.1 ms → 1.3 ms; the
old cost grows with the cube of the design's size.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Centralise tool modifiers with classic defaults and preview-safe Ctrl.
Route sketch/selection chords through a shared resolver. Keep Alt snap
suppress and dual toggle as defaults; optional Shift add-only and Ctrl
snap mapping. Skip preview rollback while a manipulator drag is active.
* Address #1616 review: classic snap suppress, single viewport owner, docs.
Default suppress to Ctrl/Cmd or Alt; drop navigation set_suppressed; remove unused label_key; add preview rollback gate test; document sketch modifiers.
* fix(#1616): correct Modifiers primary in tests; simplify rollback fixture.
* Treat Ctrl as primary off macOS, and rustfmt the modifier files.
* claim: #2544
* S command search and the command line: names, places and matching in the current language (#2544)
The S box showed each command's English label and toolbar place in every language, and found
only what was typed in English; the command line matched English only too. Rows, places and
tooltips now go through the label lookup, and the query matches the translated label, tab and
panel as well as the English ones and the id. The pin tooltips get catalog entries.
A new sweep (i18n_painted_tests) runs every language, reads the text each frame paints, and
fails on English painted where the language has a translation, skipping the design's own names
and key names, so a painter call that skips the lookup can't come back unnoticed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* The painted-text sweep also covers every Preferences page and four right-click menus
Each surface must show (the Preferences title in that language, or new text for a menu), so the
sweep can't pass by painting nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* S box rows: labels stay 'static; the place's separator is drawn, level in every language
A font's "›" (and one centred on the row) sits on the baseline beside Japanese or Chinese words,
where it reads as a comma. The separator is now a drawn chevron (glyphs::breadcrumb) centred on
the ink of the panel's name. search() returns the place as (tab, panel).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* A new design's name, Untitled, shows translated in the browser too, like the other default names
The tab and the save prompt translated "Untitled" through their own special case; the browser's
top row showed it in English. It is now one of the default names the label layer translates
(Locale::default_name, with Sketch1, Body2, Component3), so every place that shows a given name
shows it translated, and the two special cases go. The painted-text sweep no longer skips a design
name that the language translates, and splits a tab's dirty mark off, so it catches a place that
shows the raw name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Reword comments, docs and package descriptions so they describe SolidCraft's own behaviour instead of comparing it to another product. The trademark notice, the commercial-CAD rule and the navigation preset name stay as they were.
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* Browser sidebar: drag its right edge to size it, and remember the width
The left browser sidebar was fixed at 250 px. Its right edge is now a drag handle: the width follows the pointer, is clamped to 170-620 px, and is kept in the preferences (browser_width) so it survives a restart and Reset Defaults returns it to 250. The few pixels of grip sit inside the panel's own margin, so the tree rows and the scroll bar keep their input.
* Browser: float the tree over the workspace on a translucent card
Preferences -> General gains "Parts browser -> Float it over the workspace": the tree then draws on a card over the 3D view instead of taking a column, so the workspace keeps the whole window width. The card hugs the tree, scrolls past 70 % of the view's height, and uses the remembered browser_width. The canvas keeps every point the card does not cover, and turning the preference off docks the browser again.
* feat(geom): surfaces through curve networks, and spline spaces to build them
Adds spline_space (clamped B-spline spaces, Hermite interpolation, exact
embedding by Bézier degree elevation and knot insertion, a monotone cubic
for reparameterising) and network (loft, Coons and Gordon surfaces through
curves in one or two directions, with G1/G2 cross-boundary conditions
against a neighbouring face). Part of #763.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* feat(kernel): boundary surfaces from sketch curves, 3D curves and edges
kernel::boundary_network turns sketch chains, 3D sketch polylines and edge chains
into network curves, gives G1 frames of the faces along open edges
(EdgeFaces), builds the B-spline face (sides split at chain vertices so a
join shares the body's edges) and joins it into a surface body by stitching.
G2 is refused for now (not supported yet). Part of #763.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(kernel): second derivatives of B-spline surfaces in the vendored truck-geometry
BSplineSurface::uuder and vvder multiplied the second differences by p
instead of p·(p − 1), as BSplineCurve::der2 does, so every surface of
degree p ≥ 3 (NURBS too, through its homogeneous surface) reported
1/(p − 1) of its second derivative: a cubic surface's curvature read as
half. This is why a G2 boundary surface on a cylinder measured half the
curvature it carries (#763). New tests hold both to finite differences
for degrees 2 to 5.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(kernel): G2 boundary surfaces against a body's face
The network always carried the face's curvature across a G2 edge; the
refusal came from measuring it with truck's halved surface second
derivatives (fixed in the previous commit). EdgeFaces now reads the
face's second fundamental form from the exact second derivatives
instead of differencing the normal. A new test holds the curvature
across a cylinder's edge to the cylinder's within 0.1%, also with a
sheared far curve; G3 is refused (a network holds up to G2).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* test(kernel): a boundary patch with straight corners measures its own area
A stadium's arcs meet its lines at 180°, so the Coons patch is singular
at its corners. From such a corner the reference mesher's boundary walk
ran onto the B-spline's extrapolation past its domain (a planar spline
passes through every point of its plane there), and the face measured
289 mm² for its 158.5 (#763). The vendored mesher's bounded projection
(nearest_projection, #2043) keeps the walk on the domain; this holds it
there, by the faces, the measuring mesh and the display mesh. The
display path (#1653) was never affected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(geom,kernel): three-sided boundary surfaces (one side collapsed to a point)
A network curve may be a PointCurve: the apex where the two sides beside
it meet. The curves through it cross it at the point itself, its row of
the net collapses there, and the kernel's face leaves that side out of
its loop (three edges, one vertex at the apex). One point per patch, as
a side; refused elsewhere, when it moves, or with a continuity
condition. Tests: a triangle and a quarter disc filled flat with their
analytic areas (40 mm², 25π), by geom and by the kernel's faces and
meshes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(doc): boundary surfaces through curve networks and loops of three or four
FeatureKind::SurfaceNetwork saves a network as `u` and `v` curves, each
a sketch chain (planar or 3D), a chain of a body's edges with an
optional G1/G2 continuity, or a point (the apex of a three-sided
patch), and an `operation` that can join the surface into the body of
its edges. A SurfaceBoundary of three or four sketch curves, refused
until now, builds as the flat Coons patch of its loop (three collapse
the side opposite the first curve). The format change is one pending
file; feature-walk goldens record the new variant's sketches, bodies
and points.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(engine): surface.boundary through loops of three or four and curve networks
The command keeps its loop form (two to four curves of one sketch; three
and four now build the flat patch of the loop, crown refused there) and
gains a network form: `u` and `v`, each curve a sketch curve id, a
{sketch?, curves} chain (planar or 3D), a {body, edges, continuity?}
edge chain (g1/g2 with the face beside it) or a {point} for a
three-sided patch, with `operation` new or join. Edits may move between
the two forms (timeline.redefine accepts the command now that it has a
dialog).
Tests: analytic areas of loop patches and of a hyperbolic paraboloid
bounded by four 3D lines (every mesh vertex on z = xy/10), a loft
across two sketches, G1 and G2 measured across a cylinder's edge with
inspect.continuity (angle < 0.1°; curvature jump 1e-16 with G2 against
0.027 with G1), 26 hostile networks refused without panicking, and u/v
added to hostile_params_never_panic.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(ui): Boundary Surface dialog
Curves and Cross curves take sketch curves and edges (picks that meet
end to end in one sketch or body are one chain); Continuity and
Operation (New Body or Join). Two to four sketch curves of one sketch
with nothing across are the loop patch; anything else is a network.
Edit Feature brings either back (per-side orders, crown and stations
the dialog does not show are kept). Strings in en, ja and zh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* docs: ROADMAP M8 and the bridge patch's notes for boundary networks (#763)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* test(oracle): a boundary surface through a loop, thickened (#763)
Case 83: four sketch curves (a square's three sides and a half circle
for its top) make one boundary surface, thickened 2 mm; analytic values
from tools/oracle-analytic/cases_surfaces.py (V = 2A, area 2A + 2P,
centroid by moments). Recipes gain boundary_surface, thicken and remove.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* refactor: boundary surfaces, review cleanups
Project onto the face once per derivative evaluation (the frame is
passed to natural() and reused by scale()), keep each track's
finite-difference step instead of rescanning its table, export the
kernel's edge-pick and chain caps and the default station count for
the engine, doc and dialog to share, map TooLarge spline errors to
KernelError::TooLarge, reuse the engine's operation parser, and skip
the dialog's sketch lookup when the picks are no loop.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #1801
* Insert SVG: the file picker opens on SVG files (#1801)
Every Open went through one host picker whose filters start with designs, CAD
files and meshes, so Insert SVG (and Insert DXF) in a sketch opened on STEP,
IGES and meshes, and the SVG file had to be found under another filter.
The host's pick_open now takes the extensions the command reads and offers
them as the picker's first, default filter. Insert SVG and Insert DXF pass
their type; every other Open passes none and keeps the list it had. The
browser host ignores them (it shows its own file panel).
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>