Commit Graph

  • 81c85b553c Booleans are deterministic: result faces keep their shell's order bherbruck 2026-10-08 09:29:52 +00:00
  • a3d9eec238 Test: a pipe along 3D sketch curves ends square to the path (its end cap may reach past the end point) bherbruck 2026-10-08 09:13:01 +00:00
  • 7a2b81fbf2 Environment Map Analysis: the model's faces as a mirror reflecting a studio (sky, horizon band, floor with light streaks, two light panels); toggles like the other surface analyses bherbruck 2026-10-08 08:31:32 +00:00
  • 4126ae5a75 Clippy: assign operators in the path sweep, isocurve grid and centre of mass bherbruck 2026-10-08 08:29:56 +00:00
  • dea1f46266 Zebra, Draft and Curvature Map analyses (view state on the session, no undo step): the GPU shades the model's faces with reflected stripes, draft-angle bands to a pull direction (green, yellow within the angle, red) or a blue-green-red curvature map; the toolbar button toggles each bherbruck 2026-10-08 08:01:12 +00:00
  • 319386760f Isocurve Analysis (FusionIsoCurveAnalysisCommand): a grid of isoparametric curves each way across picked faces (the face cut by evenly spaced planes of each family), drawn while the tool is active bherbruck 2026-10-08 07:38:22 +00:00
  • 561df89b1d Minimum Radius Analysis (sketch curves exactly, edges, faces from the mesh normals; every face when nothing is picked) and Center of Mass (all bodies or picked ones, uniform density) in the sketch INSPECT panel, with markers and labels in the viewport and their own icons bherbruck 2026-10-08 07:33:35 +00:00
  • b9bc75670c Exact profiles for splines of any degree (a degree-4…7 Bézier segment kind, Seg2::Bezier, extruded as B-spline edges) and for free-form curves cut by crossings (exact sub-curves whose ends are moved to the true crossing, found by Newton; polylines only where that fails) bherbruck 2026-10-08 07:27:40 +00:00
  • f79b5c1045 Sweeps and pipes along 3D sketch curves (projected, intersection and included curves): a path that uses sketch wires is followed as one chain of points by a new kernel sweep_path (rotation-minimising frame; smooth B-spline walls per profile segment, or ruled walls mitred at sharp corners and for profiles with holes); 3D sketch curves can be picked as sweep paths bherbruck 2026-10-08 07:16:52 +00:00
  • 3aacebdda4 Canvases in the 3D pass: textured quads depth-tested against the model (the model hides them, decals sit on their face), with the section cut applied; Canvas panel (opened after placing a canvas or by Edit Canvas in INSERT): opacity slider, width, angle, flip, visibility, delete bherbruck 2026-10-08 06:31:20 +00:00
  • d5b8aa0375 User scenarios in the real UI, headless: scenario::Harness draws the app frame by frame into an egui context and drives it with control-channel input (toolbar starts, clicks on world/sketch/origin-plane/axis points, keys, typing, drags) and checks the model; tests/scenarios/*.json: box with fillets, shell and hole; revolve on XZ; sketch on a face and cut; mirror; delete and undo. Control: ui.at, ui.dialogInput. Fixes found by them: a shape started on an existing point (the origin, a corner) is tied to it; the Dimension tool's value is edited in place with the value selected, so typing replaces it bherbruck 2026-10-08 09:07:52 +00:00
  • 62dbf60eb2 Fix OK lost while a joint animates; Browser Joints folder inside the root component bherbruck 2026-10-08 08:56:25 +00:00
  • bdc15d2204 Start page and document tabs bherbruck 2026-10-08 08:02:14 +00:00
  • c8da3b78f3 Browser: rows out of view take only their space (400 bodies: 1.95 ms to 0.72 ms per frame, docs/perf.md); V shows/hides what is selected (bodies, sketches, planes and axes, components, canvases), Show/Hide with V in every menu that has it bherbruck 2026-10-08 08:37:33 +00:00
  • 8ea38bc518 STEP export: undo face merging for a body when the merged faces do not read back cleanly bherbruck 2026-10-08 08:31:54 +00:00
  • 2ac226cf0a Line tool inference like Fusion: parallel or perpendicular to existing lines, on a line's extension and tangent to circles and arcs, shown with a dashed guide and the snap label; placing the point adds the constraint (the existing curve stays, the new line follows) bherbruck 2026-10-08 08:39:08 +00:00
  • d40ef5bbdc 3D sketch: with 3D Sketch on, the Line, Spline and Point tools take points off the sketch plane, snapping to model vertices, edges and faces and to drawn 3D points (segments that stay on the plane are ordinary sketch lines); drawn 3D curves are wires with fit points (sketch.line3d, sketch.spline3d: centripetal Catmull-Rom, sketch.point3d), a clicked 3D point gets a move triad (drag along X/Y/Z or parallel to the sketch plane: sketch.move3d, joined ends move together), Delete removes it; sweep and pipe paths may mix 3D curves with sketch curves; control: ui.triad, ui.worldToScreen bherbruck 2026-10-08 08:32:08 +00:00
  • d2068e07a3 Selection inside sketches: double-click a curve selects the chain joined to it end to end (sketch.chain; shared or coincident ends), dimensions and constraint glyphs are selectable like other entities (Sel::SketchConstraint: Ctrl/Shift toggle, window and crossing boxes take them, Delete removes them with the rest), boxes leave out the origin, and the selection filter has sketch curves, points, dimensions and constraints bherbruck 2026-10-08 08:16:31 +00:00
  • f7703ca720 Fillets and chamfers along open chains of curved edges that end at planar faces square to them (the round edge of a D-shaped block): the end faces take the blend's end arcs and their edges stop at the contacts; the curved blend is tried only for curved edges or edges between curved faces, and refuses a blend larger than its neighbouring faces bherbruck 2026-10-08 08:10:06 +00:00
  • ae4570ed39 Colours in exports from materials and appearances; Appearance command bherbruck 2026-10-08 07:57:20 +00:00
  • 578b35e88a Icons: use the existing canvas icon bherbruck 2026-10-08 07:29:57 +00:00
  • 0feb6a7d70 Context menus follow Fusion's items and order (face, edge, empty space, sketch entities; browser body, sketch, component, Bodies/Sketches folders, Origin): Edit Feature, Edit Profile Sketch, Shell, Physical Material, Save As Mesh, Remove, Export DXF, Look At, Pan/Zoom/Orbit, Show All/Unisolate, Show/Hide Planes and Axes; our extras after them bherbruck 2026-10-08 07:09:45 +00:00
  • 0f4a0e7053 Browser: Canvases folder (show/hide, Edit Canvas, Calibrate, Rename, Delete; a picked canvas goes with the Delete key) bherbruck 2026-10-08 06:58:47 +00:00
  • f6b42f8750 Sketch drag feel like Fusion (sketch.drag): the grabbed point goes exactly to the cursor, a line (spline, conic) slides with it, a circle or arc grabbed on its edge changes radius about its centre (an ellipse its minor radius), the centre moves the circle; the grabbed geometry is held while the rest moves as little as it can; fixed and fully constrained geometry stays. Dragging a curve of the sketch being edited now drags it (it used to start a box selection). Tests for per-entity fully-constrained feedback bherbruck 2026-10-08 07:37:38 +00:00
  • bbd0a19260 Sketch Palette, docked at the right while sketching: line type of the selected curves (normal, construction, centerline), Look At, and options kept with each sketch (sketch.options: Sketch Grid, Snap, Slice, Show Profile, Show Points, Show Dimensions, Show Constraints, Show Projected Geometries, 3D Sketch), the degrees of freedom, Finish Sketch. Slice cuts the model at the sketch plane; Snap off places points at the cursor bherbruck 2026-10-08 07:03:08 +00:00
  • 2608ae6761 Revolve a planar body face (face: point) like Extrude does, its edges projected (linked) into a sketch on it bherbruck 2026-10-08 07:20:38 +00:00
  • 2ec34c6e78 Sketches on body faces follow their face: the plane is a face reference found again on each evaluation (same normal, nearest the picked point), and face extrudes (Extrude on a face, Press Pull) use the linked projection of the face's edges instead of a frozen copy, so they follow when earlier features change bherbruck 2026-10-08 07:13:38 +00:00
  • 2db9e66048 STEP orientation check: judge only revolution faces, no drifting parameter hint bherbruck 2026-10-08 06:17:16 +00:00
  • 66fa6fe584 Dialogs for joints, sheet metal and plastic bherbruck 2026-10-08 07:13:37 +00:00
  • ec1090837e Merged topology: a sphere's normals must be radial too (torus strips no longer pass for spheres), so torus pieces merge (40) bherbruck 2026-10-08 06:51:34 +00:00
  • a7f301bde6 Delete for everything: selection.delete removes sketch entities, features and sketches (with their dependents), construction planes, bodies (Remove feature), occurrences and components, and canvases in one undo step, with a dry run; Delete/Backspace and every menu's Delete go through it and ask first, listing what goes with it and what would fail; faces say Delete Face is not available yet; ui.confirm control method bherbruck 2026-10-08 06:22:29 +00:00
  • 7f9a8f2afd Two-entity constraints move only the second pick (tangent, parallel, perpendicular, equal, concentric, coincident, collinear, symmetric, midpoint): the constraint is applied with the first entity held (solve_holding), the second keeping its size where it can (lines turn and slide, circles translate), then resizing; if the second is fixed, projected or fully constrained the first moves instead, and if neither can the constraint is refused and nothing changes; later solves hold nothing. Context-menu constraints keep the selection order; a curve picked before a point puts the point on the curve bherbruck 2026-10-08 05:40:42 +00:00
  • 3e7826fe56 Fillets and chamfers along closed chains of curved edges between any two smooth sides (a branch pipe meeting a main pipe): a ball rolled along the edge gives the contact curves and the blend (rational B-spline through exact arcs, smooth across the chain's joints); side faces trimmed to the contacts and seams shortened; merged topology joins free-form faces that meet smoothly by their exact normals bherbruck 2026-10-08 06:31:05 +00:00
  • 4cba923bec Large-model viewport performance: bounding-box culling for face/edge/vertex picking, cached per-body boxes and model extent, picks reused while nothing changed and skipped while the view moves (400 bodies: hover 18.7 -> 1.9 ms, orbit 21 -> 2.6 ms; docs/perf.md) bherbruck 2026-10-08 06:17:49 +00:00
  • 04726747f2 Toolbar icons for the sketch commands that had the placeholder square (38 icons: project/include/intersect family, spun/iso/section curves, mid line, tangent arc, 2/3-tangent circles, arc slots, ellipse, splines, conic, text, constrainer, mirror/patterns, fillet/chamfer, offset, trim, extend, break, scale, blend, curvature and polygon constraints, AutoConstrain, curvature comb, DXF/SVG, canvas, decal), drawn in code in the sketch line style bherbruck 2026-10-08 06:05:34 +00:00
  • b4c7177589 STEP test hostile_boundaries_mesh_in_bounded_time: 12x12 patch, as agreed with solvecraft-step (still a 180 s hang bound) bherbruck 2026-10-08 05:47:45 +00:00
  • 584cb7e8a0 Browser: Show Dimensions for finished sketches bherbruck 2026-10-08 04:32:27 +00:00
  • 5539de8fd4 Booleans: a face crossed by nested intersection loops (both walls of a tube) gives each hole to the innermost piece holding it (vendored shapeops; tubes and tori cut across now work); revolved full circles start at an odd angle so their seams don't lie in common cut planes bherbruck 2026-10-08 05:31:47 +00:00
  • 89c2c440ac Dialog parity with Fusion: header with fold glyph, label column, Select/N selected chips, info glyph and OK greyed until valid, Fusion colours; Extrude rows Start (profile plane/offset), Direction (one side, two sides, symmetric), Extent Type (distance/all), Taper Angle; Hole rows Placement (single/multiple sketch points), Extents, Hole Tap Type (tapped size), Drill Point, Tip Angle; pattern Type switch; Mirror operation; pre-selection routes every item to the input that takes it (planar-only inputs, fillet tangent chains), with tests bherbruck 2026-10-08 05:33:13 +00:00
  • a8d54e0a3f docs/oracle.md: no-oracle section bherbruck 2026-10-08 05:42:37 +00:00
  • 66df249c0f Plastic: Rest (round or rectangular pad, solid or hollow wall, draft) and Plastic Rules (the six-rule library, design rules from expressions using Thickness, active rule, rules assigned to bodies; a body's rule gives Boss and Rest their draft and grooves their clearance), plastic.rules; docs/oracle.md lists the plastic features as no oracle (licence) with the analytic tests that cover them bherbruck 2026-10-08 05:30:48 +00:00
  • 1db841aa76 Insert DXF: block references expanded (INSERT with scale, rotation, column/row arrays, nested blocks with a depth cap; non-uniform scale turns circles into ellipses), paper-space entities skipped; DXF/SVG insert joins ends within a tolerance (default 0.0001 mm, tolerance param) so nearly-closed drawings make profiles bherbruck 2026-10-08 05:46:31 +00:00
  • 7757e6d9c7 Construction toggle on every curve type: the selection switches as a whole (slots, polygons; to construction unless all already are), projected curves too; construction curves are drawn dashed and centerlines dash-dot; profiles update at once bherbruck 2026-10-08 05:21:14 +00:00
  • 00ddaa25f5 Canvas and Decal (FusionAddCanvasCommand, FusionAddEditDecalCommand): PNG/JPEG reference images stored in the design (base64), placed on an origin/construction plane, a sketch plane or a planar face; canvas.edit (position, width, angle, opacity, flip, visibility), canvas.calibrate (scale by a known distance), canvas.delete; drawn textured in the viewport; toolbar tools pick the file, then the plane or face bherbruck 2026-10-08 05:31:04 +00:00
  • bc21959777 Oracle seams: fmt bherbruck 2026-10-08 05:15:53 +00:00
  • 20aa3ed4e1 Oracle: seam-normalised topology. When body count, volume and area pass but the raw counts differ, Fusion's faces/edges/vertices are normalised from its face, edge and vertex lists as SolveCraft's merged counts are (closed-surface patches split by seams count once, seam edges dropped, two-edge vertices joined) and compared exactly, with both raw counts in the note (56 and 61 pass) bherbruck 2026-10-08 05:15:25 +00:00
  • 5b8816aa7d Fix/Unfix on every sketch entity: points (Fix constraint) and lines, arcs, circles, ellipses, splines and conics (fixed curves hold their points and radius); ConstraintFix takes entities (fixes them all unless all are fixed); the toolbar button and the context menu act on the whole selection; fixed points never move when dragged or solved; projected geometry counts as fixed; fixed geometry is drawn green; sketch.inspect reports fixed bherbruck 2026-10-08 04:58:30 +00:00
  • b457b6b7b6 Sketch: lines snap to horizontal/vertical near the axes (with an H/V marker; the constraint is inferred), inline dimension boxes sit beside what they measure instead of on it; Esc acts once per press (ends the line chain first, then the tool) bherbruck 2026-10-08 02:46:32 +00:00
  • d44a104dcc STEP test hostile_boundaries_mesh_in_bounded_time: smaller wild patch (16x16) and a 180 s bound, so it catches hangs without failing on a loaded machine (11 s now, was ~50 s against a 60 s bound) bherbruck 2026-10-08 05:05:34 +00:00
  • f9b7604ed1 Large sketches: the solver works on each component's own Jacobian (block-diagonal DOF analysis, no dense whole-sketch matrices), component grouping by map, and profile finding uses its grid for end checks and keyed sorting. A 10 000-entity sketch solves in 65 ms instead of 1.3 s and commands on it take ~0.2 s instead of 5 s; numbers in docs/perf.md bherbruck 2026-10-08 04:56:06 +00:00
  • 69353faf75 Kernel: clippy bherbruck 2026-10-08 04:44:01 +00:00
  • fc7cb5d60d Booleans: prisms along one direction combined exactly in 2D (overlapping holes in plates; equal sections stacked end to end), bodies touching along one whole face stitched (a part joined with its mirror image), pushing coincident faces works with any plane-and-cylinder neighbours bherbruck 2026-10-08 04:42:43 +00:00
  • 187ffd0a03 Sketch dimensions drawn as dimensions: extension lines, dimension lines and arcs with arrowheads (flipped outside when tight), the value centred on the line (fx: for expressions), R/Ø leaders, angle arcs, arc-length mark, driven ones in parentheses in a muted colour; click selects, Delete removes, drag moves the text (sketch.dimension_text, kept relative to the dimension), double-click edits the value in place with parameter completion bherbruck 2026-10-08 04:19:30 +00:00
  • 4adfd69d6a Plastic: Boss (draft, root fillet, hole, ribs), Lip and Groove along a shelled body's rim (inside or outside edge, groove clearance), Snap Fit (cantilever arm with a catch) bherbruck 2026-10-08 04:36:18 +00:00
  • 4c64ceed5c Curvature Comb Analysis (FusionCurvatureCombAnalysisCommand): combs on sketch curves (exact, from their Bézier/conic pieces) and model edges, with minimum radius; interactive tool draws teeth and envelope; ignored large-sketch timing test (sketch_perf) bherbruck 2026-10-08 04:40:33 +00:00
  • 7382ebd6e8 STEP export: Fusion round-trip fixes (sense, analytic surfaces, horn torus) bherbruck 2026-10-08 03:09:43 +00:00
  • 178fc47ed7 Custom title bar: on Windows and Linux the application bar is the window's title bar (drag to move with OS snapping, double-click to maximize or restore, minimize/maximize/close buttons, resize from the edges and corners); macOS keeps its traffic lights over the bar; the web build has no window buttons; ui.window control method (adapted from VectorCraft) bherbruck 2026-10-08 03:54:15 +00:00
  • e5560e8035 Sheet metal: rules as expressions (Thickness, K-factor, bend radius, reliefs, gaps; may use parameters), sheet bodies kept as flat patterns and sewn folded from exact faces (new kernel::sew), Flange (base, edge with height to the outer face, angle, inside/outside/middle, several edges at once with corners closed to the rule gap, contour from an open chain), Hem, Unfold/Refold with cut-outs that follow the bends, Convert to Sheet Metal, flat pattern with bend lines and bend table, DXF export; recipes: sm_flange, sm_hem, unfold/refold, rule edits (oracle 67-76 all pass) bherbruck 2026-10-08 03:50:06 +00:00
  • df64a373b0 Sketch links: body-based references (edges, faces, silhouettes, sections, iso curves) are cached by model identity, so editing a sketch with projections no longer re-projects (30x faster per edit on a 20k-triangle model) bherbruck 2026-10-08 04:11:06 +00:00
  • 7ca6e9278b Loop blends: sharp corners between straight edges meet in mitres (ellipse arcs), arcs of exactly the blend's radius become sphere octants (pole-free), and loops plus the other edges blend in order (every edge of an extruded part: sphere and torus corners) bherbruck 2026-10-08 03:50:00 +00:00
  • 457ed7fed7 Offset works on splines, ellipses and conics (and chains through them): the offset curve becomes a fit spline within a few hundredths of a millimetre bherbruck 2026-10-08 03:55:48 +00:00
  • 205ddfcf27 Sketch Fillet on corners of a line and an arc or two arcs (the tangent arc nearest the corner, curves cut back to it, radius dimension) bherbruck 2026-10-08 03:43:57 +00:00
  • 9a9caa6511 Browser tree: components with an activation radio (others drawn faded), ground pin, groups in Bodies/Sketches/Construction (new, from selection, rename, ungroup, kept in the design: browser.group/ungroup/rename_group/move/order), drag and drop to reorder, into and out of groups and into another component, Ctrl/Shift multi-select, hover lights the bodies, folds remembered; occurrence Move/Copy with a gizmo and Capture Position/Revert; the viewport shows bodies where their occurrences place them bherbruck 2026-10-08 02:11:36 +00:00
  • 7e373ff1f7 Draft of walls between caps on non-convex bodies: planes tilt about their neutral-plane line, cylinders become cones (47: drafted round-ended pocket) bherbruck 2026-10-08 03:29:15 +00:00
  • 94a0cdef77 Ellipse dimensions: major radius (type major: centre to axis end) and minor radius (a radius dimension on the ellipse) bherbruck 2026-10-08 03:34:01 +00:00
  • 59685a9180 Shell and offset faces on bodies of planes and cylinders (filleted boxes, bosses: each face moves along its normal, cylinders change radius, corners and arcs follow); surface classification leaves out singular points (cone apexes); recipes: holes on cylinders drill toward the axis bherbruck 2026-10-08 03:18:16 +00:00
  • d285cedd73 Trim and Break on ellipses, splines and conics: cut at the exact crossings (alternating projection onto both curves), pieces stay exact (Bézier spans as single-span control splines, conic arcs as conics); geom Seg2::split_at and closest_param bherbruck 2026-10-08 03:23:40 +00:00
  • 097217a3f3 Sketch drawing: points dropped on a curve stay on it ("on:<curve>:x,y" point arguments add a point-on-curve constraint; On hint while drawing) bherbruck 2026-10-08 03:12:36 +00:00
  • a6dc759a02 Fix: rectangles over-constrained after an edit (dragged sides collapsed) bherbruck 2026-10-08 02:46:35 +00:00
  • c2309eb43b Joints engine: joint origins that snap to faces, round ends or points (re-found on every solve, so joints follow edits), joints (rigid, revolute, slider, cylindrical, pin-slot, planar, ball) with values, limits, flip and offset, As-built Joint, Rigid Group, Drive Joints, Motion Link, a joint-graph solver from grounded occurrences (degrees of freedom per occurrence, loop conflicts reported), Interference between bodies bherbruck 2026-10-08 02:39:16 +00:00
  • 13b72bb011 Sketch drawing: clicking a model vertex projects it into the sketch (linked point) and draws from it, as Fusion does ("vertex:x,y,z" point arguments) bherbruck 2026-10-08 02:58:43 +00:00
  • 8c88fb8d2d Measure: split triangles that cut through curved faces onto the surface (trimmed faces after booleans were measured up to 15% off; 61's keyway volume now matches); oracle step check shows the original volume bherbruck 2026-10-08 02:39:05 +00:00
  • 063d55bdb3 Sketch drawing: a point snapped to a line's midpoint stays there ("mid:<line>" point arguments add a MidPoint constraint) bherbruck 2026-10-08 02:45:16 +00:00
  • d729918034 Change Parameters dialog (params_dialog.rs): favourites, user parameters (unit, expression, value, comment; add, rename, delete) and model parameters grouped by sketch or feature, live validation and preview while typing, CSV/JSON import and export; parameter-name autocomplete (Tab) in every expression box: dialogs, inline sketch dimensions, manipulator values bherbruck 2026-10-08 02:24:25 +00:00
  • 0da4c756c8 Sketch drawing inference: the cursor snaps to line midpoints and to horizontal/vertical alignment with the previous point (with an H/V/Mid hint), so lines drawn that way get their constraints inferred bherbruck 2026-10-08 02:35:08 +00:00
  • 888ac0f5c4 Navigation bar: Look At (selected face or plane, else the active sketch) and visual style (shaded with edges, shaded, wireframe; kept between runs); F6 fits the view bherbruck 2026-10-08 02:22:42 +00:00
  • 9c03f4bf32 Oracle replayer: features with fusion_effective_extent replay the extent Fusion actually used (63: its through-all is sized from vertices); noted per case in docs/oracle.md bherbruck 2026-10-08 02:07:55 +00:00
  • 606d9913aa ROADMAP: sketch milestone update bherbruck 2026-10-08 02:16:37 +00:00
  • 31030ed008 Exact free-form profiles: geom Seg2 gains cubic Béziers and conics (rational quadratics: exact length, area, split, tangents); sketch ellipses, conics, text, fit splines and control splines up to degree 3 enter profiles as exact segments wherever a loop uses a whole segment, and the kernel builds them as B-spline / NURBS edges (an extruded ellipse is three faces with the exact volume) bherbruck 2026-10-08 02:08:53 +00:00
  • 8b4ec13d3b Edit Feature dialogs for construction planes (offset, at angle), split, scale, offset face, thread, stock, pipe, emboss, rib/web, replace face and remove bherbruck 2026-10-08 02:05:06 +00:00
  • 0136567d4d Double-click an edge selects its smooth loop bherbruck 2026-10-08 02:01:26 +00:00
  • 950fa39b0f Coil dialog; value box for curve-based dialogs (pipe, rib, path pattern) at the picked curve bherbruck 2026-10-08 01:59:53 +00:00
  • 83438eeaab Coil walls as smooth B-spline surfaces (one per profile segment; ruled walls only as a fallback): a 3-turn coil has 4 faces instead of 724 bherbruck 2026-10-08 01:56:30 +00:00
  • d2ba20e174 Dialogs with live previews for Rib, Web, Emboss, Replace Face, Align, Remove, Pattern on Path, Pipe and Stock bherbruck 2026-10-08 01:40:38 +00:00
  • 015bc56c93 Offset Plane (with plane preview), Plane at Angle, Split Body, Scale, Offset Face and Thread dialogs bherbruck 2026-10-08 01:37:40 +00:00
  • 441b36ce74 Browser: derive Default for rows (clippy) bherbruck 2026-10-08 01:30:32 +00:00
  • fa8da64613 Context menus: radial marking menu in the viewport (Repeat on top, Undo, Delete, Press Pull, Create Sketch, Extrude, Move/Copy, Hole; right press-and-hold or a right drag on the ring flicks to pick), contextual lists for faces, edges, bodies, sketch entities (construction, fix, applicable constraints) and empty space; browser menus for bodies, sketches and components; rename box, Properties window; body.rename and sketch.redefine commands; ui.menu / ui.menuPick / ui.rename control methods bherbruck 2026-10-08 01:28:08 +00:00
  • 1df3e3fe0f ROADMAP: parameters done, M7 progress, oracle 52/66 bherbruck 2026-10-08 01:38:03 +00:00
  • 1b664bb1b0 Sketch UI: click a constraint glyph to select it, Delete removes the constraint; glyphs sit half way along their curve; lighter randomized sketch test bherbruck 2026-10-08 01:24:48 +00:00
  • 1c10d1e56a STEP import: 65/66 Fusion files; bounded meshing bherbruck 2026-10-08 01:12:43 +00:00
  • 7a0cc85392 Preferences (File menu): theme, grid, perspective, auto-project face edges, body selection; all kept between runs bherbruck 2026-10-08 01:20:33 +00:00
  • 967bee179a Physical Material dialog (body appearance follows the material: steel, brass, copper, PLA…), Enter applies every OK dialog bherbruck 2026-10-08 01:17:45 +00:00
  • 218d19d753 Coil: clippy bherbruck 2026-10-08 01:11:44 +00:00
  • 9df954cd94 Coil (PrimitiveCoil: diameter, two of revolutions/height/pitch, circular or square section inside/on/outside, start angle, handedness) on a new kernel helical sweep; loft to a point (sketch point sections, pyramids); recipes: a sweep along a fitted 3D helix replays as a coil (oracle 49, compared within 0.5% since Fusion's path is a spline fit) and loft point sections (oracle 37) bherbruck 2026-10-08 01:10:16 +00:00
  • 4455402eab Sketch profiles: grid-accelerated splitting and node merging, bounding-box nesting (large sketches several times faster); randomized sketch-editing test (thousands of mixed create/modify/constraint/projection/undo steps: no panics, designs round-trip) bherbruck 2026-10-08 01:11:36 +00:00
  • 97abc687ae Extrude taper handle: drag the ring beside the arrow sideways to tilt the walls (1 degree steps; Alt/Ctrl free) bherbruck 2026-10-08 00:59:19 +00:00
  • 708aad8e65 ROADMAP: M6 UI depth status bherbruck 2026-10-08 00:56:18 +00:00
  • 428237563a Hole: depth arrow into the material (drag sets the depth; empty is through all) bherbruck 2026-10-08 00:55:53 +00:00
  • 10e66785b1 Patterns of components (rectangular, circular or path: new occurrences at each placement); path pattern orientation test bherbruck 2026-10-08 00:44:47 +00:00
  • 1988594a13 Section Analysis (FusionHalfSectionViewCommand, INSPECT): cut the view by an origin plane, construction plane or planar face with an offset (drag arrow) and flip; the inside of cut bodies shows a flat cap colour; live while the dialog is open, Remove Section on the right-click menu; viewport shader validated in a test bherbruck 2026-10-08 00:14:57 +00:00